| /* | |
| * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. | |
| * | |
| * Author: Shlomi Gridish <gridish@freescale.com> | |
| * | |
| * Description: | |
| * UCC GETH Driver -- PHY handling | |
| * | |
| * Changelog: | |
| * Jun 28, 2006 Li Yang <LeoLi@freescale.com> | |
| * - Rearrange code and style fixes | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/string.h> | |
| #include <linux/errno.h> | |
| #include <linux/slab.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/init.h> | |
| #include <linux/delay.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/mm.h> | |
| #include <linux/module.h> | |
| #include <linux/version.h> | |
| #include <linux/crc32.h> | |
| #include <linux/mii.h> | |
| #include <linux/ethtool.h> | |
| #include <asm/io.h> | |
| #include <asm/irq.h> | |
| #include <asm/uaccess.h> | |
| #include "ucc_geth.h" | |
| #include "ucc_geth_phy.h" | |
| #define ugphy_printk(level, format, arg...) \ | |
| printk(level format "\n", ## arg) | |
| #define ugphy_dbg(format, arg...) \ | |
| ugphy_printk(KERN_DEBUG, format , ## arg) | |
| #define ugphy_err(format, arg...) \ | |
| ugphy_printk(KERN_ERR, format , ## arg) | |
| #define ugphy_info(format, arg...) \ | |
| ugphy_printk(KERN_INFO, format , ## arg) | |
| #define ugphy_warn(format, arg...) \ | |
| ugphy_printk(KERN_WARNING, format , ## arg) | |
| #ifdef UGETH_VERBOSE_DEBUG | |
| #define ugphy_vdbg ugphy_dbg | |
| #else | |
| #define ugphy_vdbg(fmt, args...) do { } while (0) | |
| #endif /* UGETH_VERBOSE_DEBUG */ | |
| static void config_genmii_advert(struct ugeth_mii_info *mii_info); | |
| static void genmii_setup_forced(struct ugeth_mii_info *mii_info); | |
| static void genmii_restart_aneg(struct ugeth_mii_info *mii_info); | |
| static int gbit_config_aneg(struct ugeth_mii_info *mii_info); | |
| static int genmii_config_aneg(struct ugeth_mii_info *mii_info); | |
| static int genmii_update_link(struct ugeth_mii_info *mii_info); | |
| static int genmii_read_status(struct ugeth_mii_info *mii_info); | |
| u16 phy_read(struct ugeth_mii_info *mii_info, u16 regnum); | |
| void phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val); | |
| /* Write value to the PHY for this device to the register at regnum, */ | |
| /* waiting until the write is done before it returns. All PHY */ | |
| /* configuration has to be done through the TSEC1 MIIM regs */ | |
| void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value) | |
| { | |
| struct ucc_geth_private *ugeth = netdev_priv(dev); | |
| struct ucc_mii_mng *mii_regs; | |
| enum enet_tbi_mii_reg mii_reg = (enum enet_tbi_mii_reg) regnum; | |
| u32 tmp_reg; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| spin_lock_irq(&ugeth->lock); | |
| mii_regs = ugeth->mii_info->mii_regs; | |
| /* Set this UCC to be the master of the MII managment */ | |
| ucc_set_qe_mux_mii_mng(ugeth->ug_info->uf_info.ucc_num); | |
| /* Stop the MII management read cycle */ | |
| out_be32(&mii_regs->miimcom, 0); | |
| /* Setting up the MII Mangement Address Register */ | |
| tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; | |
| out_be32(&mii_regs->miimadd, tmp_reg); | |
| /* Setting up the MII Mangement Control Register with the value */ | |
| out_be32(&mii_regs->miimcon, (u32) value); | |
| /* Wait till MII management write is complete */ | |
| while ((in_be32(&mii_regs->miimind)) & MIIMIND_BUSY) | |
| cpu_relax(); | |
| spin_unlock_irq(&ugeth->lock); | |
| udelay(10000); | |
| } | |
| /* Reads from register regnum in the PHY for device dev, */ | |
| /* returning the value. Clears miimcom first. All PHY */ | |
| /* configuration has to be done through the TSEC1 MIIM regs */ | |
| int read_phy_reg(struct net_device *dev, int mii_id, int regnum) | |
| { | |
| struct ucc_geth_private *ugeth = netdev_priv(dev); | |
| struct ucc_mii_mng *mii_regs; | |
| enum enet_tbi_mii_reg mii_reg = (enum enet_tbi_mii_reg) regnum; | |
| u32 tmp_reg; | |
| u16 value; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| spin_lock_irq(&ugeth->lock); | |
| mii_regs = ugeth->mii_info->mii_regs; | |
| /* Setting up the MII Mangement Address Register */ | |
| tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg; | |
| out_be32(&mii_regs->miimadd, tmp_reg); | |
| /* Perform an MII management read cycle */ | |
| out_be32(&mii_regs->miimcom, MIIMCOM_READ_CYCLE); | |
| /* Wait till MII management write is complete */ | |
| while ((in_be32(&mii_regs->miimind)) & MIIMIND_BUSY) | |
| cpu_relax(); | |
| udelay(10000); | |
| /* Read MII management status */ | |
| value = (u16) in_be32(&mii_regs->miimstat); | |
| out_be32(&mii_regs->miimcom, 0); | |
| if (value == 0xffff) | |
| ugphy_warn("read wrong value : mii_id %d,mii_reg %d, base %08x", | |
| mii_id, mii_reg, (u32) & (mii_regs->miimcfg)); | |
| spin_unlock_irq(&ugeth->lock); | |
| return (value); | |
| } | |
| void mii_clear_phy_interrupt(struct ugeth_mii_info *mii_info) | |
| { | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| if (mii_info->phyinfo->ack_interrupt) | |
| mii_info->phyinfo->ack_interrupt(mii_info); | |
| } | |
| void mii_configure_phy_interrupt(struct ugeth_mii_info *mii_info, | |
| u32 interrupts) | |
| { | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| mii_info->interrupts = interrupts; | |
| if (mii_info->phyinfo->config_intr) | |
| mii_info->phyinfo->config_intr(mii_info); | |
| } | |
| /* Writes MII_ADVERTISE with the appropriate values, after | |
| * sanitizing advertise to make sure only supported features | |
| * are advertised | |
| */ | |
| static void config_genmii_advert(struct ugeth_mii_info *mii_info) | |
| { | |
| u32 advertise; | |
| u16 adv; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| /* Only allow advertising what this PHY supports */ | |
| mii_info->advertising &= mii_info->phyinfo->features; | |
| advertise = mii_info->advertising; | |
| /* Setup standard advertisement */ | |
| adv = phy_read(mii_info, MII_ADVERTISE); | |
| adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); | |
| if (advertise & ADVERTISED_10baseT_Half) | |
| adv |= ADVERTISE_10HALF; | |
| if (advertise & ADVERTISED_10baseT_Full) | |
| adv |= ADVERTISE_10FULL; | |
| if (advertise & ADVERTISED_100baseT_Half) | |
| adv |= ADVERTISE_100HALF; | |
| if (advertise & ADVERTISED_100baseT_Full) | |
| adv |= ADVERTISE_100FULL; | |
| phy_write(mii_info, MII_ADVERTISE, adv); | |
| } | |
| static void genmii_setup_forced(struct ugeth_mii_info *mii_info) | |
| { | |
| u16 ctrl; | |
| u32 features = mii_info->phyinfo->features; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| ctrl = phy_read(mii_info, MII_BMCR); | |
| ctrl &= | |
| ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); | |
| ctrl |= BMCR_RESET; | |
| switch (mii_info->speed) { | |
| case SPEED_1000: | |
| if (features & (SUPPORTED_1000baseT_Half | |
| | SUPPORTED_1000baseT_Full)) { | |
| ctrl |= BMCR_SPEED1000; | |
| break; | |
| } | |
| mii_info->speed = SPEED_100; | |
| case SPEED_100: | |
| if (features & (SUPPORTED_100baseT_Half | |
| | SUPPORTED_100baseT_Full)) { | |
| ctrl |= BMCR_SPEED100; | |
| break; | |
| } | |
| mii_info->speed = SPEED_10; | |
| case SPEED_10: | |
| if (features & (SUPPORTED_10baseT_Half | |
| | SUPPORTED_10baseT_Full)) | |
| break; | |
| default: /* Unsupported speed! */ | |
| ugphy_err("%s: Bad speed!", mii_info->dev->name); | |
| break; | |
| } | |
| phy_write(mii_info, MII_BMCR, ctrl); | |
| } | |
| /* Enable and Restart Autonegotiation */ | |
| static void genmii_restart_aneg(struct ugeth_mii_info *mii_info) | |
| { | |
| u16 ctl; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| ctl = phy_read(mii_info, MII_BMCR); | |
| ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); | |
| phy_write(mii_info, MII_BMCR, ctl); | |
| } | |
| static int gbit_config_aneg(struct ugeth_mii_info *mii_info) | |
| { | |
| u16 adv; | |
| u32 advertise; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| if (mii_info->autoneg) { | |
| /* Configure the ADVERTISE register */ | |
| config_genmii_advert(mii_info); | |
| advertise = mii_info->advertising; | |
| adv = phy_read(mii_info, MII_1000BASETCONTROL); | |
| adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP | | |
| MII_1000BASETCONTROL_HALFDUPLEXCAP); | |
| if (advertise & SUPPORTED_1000baseT_Half) | |
| adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP; | |
| if (advertise & SUPPORTED_1000baseT_Full) | |
| adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP; | |
| phy_write(mii_info, MII_1000BASETCONTROL, adv); | |
| /* Start/Restart aneg */ | |
| genmii_restart_aneg(mii_info); | |
| } else | |
| genmii_setup_forced(mii_info); | |
| return 0; | |
| } | |
| static int genmii_config_aneg(struct ugeth_mii_info *mii_info) | |
| { | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| if (mii_info->autoneg) { | |
| config_genmii_advert(mii_info); | |
| genmii_restart_aneg(mii_info); | |
| } else | |
| genmii_setup_forced(mii_info); | |
| return 0; | |
| } | |
| static int genmii_update_link(struct ugeth_mii_info *mii_info) | |
| { | |
| u16 status; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| /* Do a fake read */ | |
| phy_read(mii_info, MII_BMSR); | |
| /* Read link and autonegotiation status */ | |
| status = phy_read(mii_info, MII_BMSR); | |
| if ((status & BMSR_LSTATUS) == 0) | |
| mii_info->link = 0; | |
| else | |
| mii_info->link = 1; | |
| /* If we are autonegotiating, and not done, | |
| * return an error */ | |
| if (mii_info->autoneg && !(status & BMSR_ANEGCOMPLETE)) | |
| return -EAGAIN; | |
| return 0; | |
| } | |
| static int genmii_read_status(struct ugeth_mii_info *mii_info) | |
| { | |
| u16 status; | |
| int err; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| /* Update the link, but return if there | |
| * was an error */ | |
| err = genmii_update_link(mii_info); | |
| if (err) | |
| return err; | |
| if (mii_info->autoneg) { | |
| status = phy_read(mii_info, MII_LPA); | |
| if (status & (LPA_10FULL | LPA_100FULL)) | |
| mii_info->duplex = DUPLEX_FULL; | |
| else | |
| mii_info->duplex = DUPLEX_HALF; | |
| if (status & (LPA_100FULL | LPA_100HALF)) | |
| mii_info->speed = SPEED_100; | |
| else | |
| mii_info->speed = SPEED_10; | |
| mii_info->pause = 0; | |
| } | |
| /* On non-aneg, we assume what we put in BMCR is the speed, | |
| * though magic-aneg shouldn't prevent this case from occurring | |
| */ | |
| return 0; | |
| } | |
| static int marvell_init(struct ugeth_mii_info *mii_info) | |
| { | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| phy_write(mii_info, 0x14, 0x0cd2); | |
| phy_write(mii_info, MII_BMCR, | |
| phy_read(mii_info, MII_BMCR) | BMCR_RESET); | |
| msleep(4000); | |
| return 0; | |
| } | |
| static int marvell_config_aneg(struct ugeth_mii_info *mii_info) | |
| { | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| /* The Marvell PHY has an errata which requires | |
| * that certain registers get written in order | |
| * to restart autonegotiation */ | |
| phy_write(mii_info, MII_BMCR, BMCR_RESET); | |
| phy_write(mii_info, 0x1d, 0x1f); | |
| phy_write(mii_info, 0x1e, 0x200c); | |
| phy_write(mii_info, 0x1d, 0x5); | |
| phy_write(mii_info, 0x1e, 0); | |
| phy_write(mii_info, 0x1e, 0x100); | |
| gbit_config_aneg(mii_info); | |
| return 0; | |
| } | |
| static int marvell_read_status(struct ugeth_mii_info *mii_info) | |
| { | |
| u16 status; | |
| int err; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| /* Update the link, but return if there | |
| * was an error */ | |
| err = genmii_update_link(mii_info); | |
| if (err) | |
| return err; | |
| /* If the link is up, read the speed and duplex */ | |
| /* If we aren't autonegotiating, assume speeds | |
| * are as set */ | |
| if (mii_info->autoneg && mii_info->link) { | |
| int speed; | |
| status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS); | |
| /* Get the duplexity */ | |
| if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX) | |
| mii_info->duplex = DUPLEX_FULL; | |
| else | |
| mii_info->duplex = DUPLEX_HALF; | |
| /* Get the speed */ | |
| speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK; | |
| switch (speed) { | |
| case MII_M1011_PHY_SPEC_STATUS_1000: | |
| mii_info->speed = SPEED_1000; | |
| break; | |
| case MII_M1011_PHY_SPEC_STATUS_100: | |
| mii_info->speed = SPEED_100; | |
| break; | |
| default: | |
| mii_info->speed = SPEED_10; | |
| break; | |
| } | |
| mii_info->pause = 0; | |
| } | |
| return 0; | |
| } | |
| static int marvell_ack_interrupt(struct ugeth_mii_info *mii_info) | |
| { | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| /* Clear the interrupts by reading the reg */ | |
| phy_read(mii_info, MII_M1011_IEVENT); | |
| return 0; | |
| } | |
| static int marvell_config_intr(struct ugeth_mii_info *mii_info) | |
| { | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| if (mii_info->interrupts == MII_INTERRUPT_ENABLED) | |
| phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT); | |
| else | |
| phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); | |
| return 0; | |
| } | |
| static int cis820x_init(struct ugeth_mii_info *mii_info) | |
| { | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| phy_write(mii_info, MII_CIS8201_AUX_CONSTAT, | |
| MII_CIS8201_AUXCONSTAT_INIT); | |
| phy_write(mii_info, MII_CIS8201_EXT_CON1, MII_CIS8201_EXTCON1_INIT); | |
| return 0; | |
| } | |
| static int cis820x_read_status(struct ugeth_mii_info *mii_info) | |
| { | |
| u16 status; | |
| int err; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| /* Update the link, but return if there | |
| * was an error */ | |
| err = genmii_update_link(mii_info); | |
| if (err) | |
| return err; | |
| /* If the link is up, read the speed and duplex */ | |
| /* If we aren't autonegotiating, assume speeds | |
| * are as set */ | |
| if (mii_info->autoneg && mii_info->link) { | |
| int speed; | |
| status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT); | |
| if (status & MII_CIS8201_AUXCONSTAT_DUPLEX) | |
| mii_info->duplex = DUPLEX_FULL; | |
| else | |
| mii_info->duplex = DUPLEX_HALF; | |
| speed = status & MII_CIS8201_AUXCONSTAT_SPEED; | |
| switch (speed) { | |
| case MII_CIS8201_AUXCONSTAT_GBIT: | |
| mii_info->speed = SPEED_1000; | |
| break; | |
| case MII_CIS8201_AUXCONSTAT_100: | |
| mii_info->speed = SPEED_100; | |
| break; | |
| default: | |
| mii_info->speed = SPEED_10; | |
| break; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int cis820x_ack_interrupt(struct ugeth_mii_info *mii_info) | |
| { | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| phy_read(mii_info, MII_CIS8201_ISTAT); | |
| return 0; | |
| } | |
| static int cis820x_config_intr(struct ugeth_mii_info *mii_info) | |
| { | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| if (mii_info->interrupts == MII_INTERRUPT_ENABLED) | |
| phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK); | |
| else | |
| phy_write(mii_info, MII_CIS8201_IMASK, 0); | |
| return 0; | |
| } | |
| #define DM9161_DELAY 10 | |
| static int dm9161_read_status(struct ugeth_mii_info *mii_info) | |
| { | |
| u16 status; | |
| int err; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| /* Update the link, but return if there | |
| * was an error */ | |
| err = genmii_update_link(mii_info); | |
| if (err) | |
| return err; | |
| /* If the link is up, read the speed and duplex */ | |
| /* If we aren't autonegotiating, assume speeds | |
| * are as set */ | |
| if (mii_info->autoneg && mii_info->link) { | |
| status = phy_read(mii_info, MII_DM9161_SCSR); | |
| if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H)) | |
| mii_info->speed = SPEED_100; | |
| else | |
| mii_info->speed = SPEED_10; | |
| if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F)) | |
| mii_info->duplex = DUPLEX_FULL; | |
| else | |
| mii_info->duplex = DUPLEX_HALF; | |
| } | |
| return 0; | |
| } | |
| static int dm9161_config_aneg(struct ugeth_mii_info *mii_info) | |
| { | |
| struct dm9161_private *priv = mii_info->priv; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| if (0 == priv->resetdone) | |
| return -EAGAIN; | |
| return 0; | |
| } | |
| static void dm9161_timer(unsigned long data) | |
| { | |
| struct ugeth_mii_info *mii_info = (struct ugeth_mii_info *)data; | |
| struct dm9161_private *priv = mii_info->priv; | |
| u16 status = phy_read(mii_info, MII_BMSR); | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| if (status & BMSR_ANEGCOMPLETE) { | |
| priv->resetdone = 1; | |
| } else | |
| mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ); | |
| } | |
| static int dm9161_init(struct ugeth_mii_info *mii_info) | |
| { | |
| struct dm9161_private *priv; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| /* Allocate the private data structure */ | |
| priv = kmalloc(sizeof(struct dm9161_private), GFP_KERNEL); | |
| if (NULL == priv) | |
| return -ENOMEM; | |
| mii_info->priv = priv; | |
| /* Reset is not done yet */ | |
| priv->resetdone = 0; | |
| phy_write(mii_info, MII_BMCR, | |
| phy_read(mii_info, MII_BMCR) | BMCR_RESET); | |
| phy_write(mii_info, MII_BMCR, | |
| phy_read(mii_info, MII_BMCR) & ~BMCR_ISOLATE); | |
| config_genmii_advert(mii_info); | |
| /* Start/Restart aneg */ | |
| genmii_config_aneg(mii_info); | |
| /* Start a timer for DM9161_DELAY seconds to wait | |
| * for the PHY to be ready */ | |
| init_timer(&priv->timer); | |
| priv->timer.function = &dm9161_timer; | |
| priv->timer.data = (unsigned long)mii_info; | |
| mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ); | |
| return 0; | |
| } | |
| static void dm9161_close(struct ugeth_mii_info *mii_info) | |
| { | |
| struct dm9161_private *priv = mii_info->priv; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| del_timer_sync(&priv->timer); | |
| kfree(priv); | |
| } | |
| static int dm9161_ack_interrupt(struct ugeth_mii_info *mii_info) | |
| { | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| /* Clear the interrupts by reading the reg */ | |
| phy_read(mii_info, MII_DM9161_INTR); | |
| return 0; | |
| } | |
| static int dm9161_config_intr(struct ugeth_mii_info *mii_info) | |
| { | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| if (mii_info->interrupts == MII_INTERRUPT_ENABLED) | |
| phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT); | |
| else | |
| phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP); | |
| return 0; | |
| } | |
| /* Cicada 820x */ | |
| static struct phy_info phy_info_cis820x = { | |
| .phy_id = 0x000fc440, | |
| .name = "Cicada Cis8204", | |
| .phy_id_mask = 0x000fffc0, | |
| .features = MII_GBIT_FEATURES, | |
| .init = &cis820x_init, | |
| .config_aneg = &gbit_config_aneg, | |
| .read_status = &cis820x_read_status, | |
| .ack_interrupt = &cis820x_ack_interrupt, | |
| .config_intr = &cis820x_config_intr, | |
| }; | |
| static struct phy_info phy_info_dm9161 = { | |
| .phy_id = 0x0181b880, | |
| .phy_id_mask = 0x0ffffff0, | |
| .name = "Davicom DM9161E", | |
| .init = dm9161_init, | |
| .config_aneg = dm9161_config_aneg, | |
| .read_status = dm9161_read_status, | |
| .close = dm9161_close, | |
| }; | |
| static struct phy_info phy_info_dm9161a = { | |
| .phy_id = 0x0181b8a0, | |
| .phy_id_mask = 0x0ffffff0, | |
| .name = "Davicom DM9161A", | |
| .features = MII_BASIC_FEATURES, | |
| .init = dm9161_init, | |
| .config_aneg = dm9161_config_aneg, | |
| .read_status = dm9161_read_status, | |
| .ack_interrupt = dm9161_ack_interrupt, | |
| .config_intr = dm9161_config_intr, | |
| .close = dm9161_close, | |
| }; | |
| static struct phy_info phy_info_marvell = { | |
| .phy_id = 0x01410c00, | |
| .phy_id_mask = 0xffffff00, | |
| .name = "Marvell 88E11x1", | |
| .features = MII_GBIT_FEATURES, | |
| .init = &marvell_init, | |
| .config_aneg = &marvell_config_aneg, | |
| .read_status = &marvell_read_status, | |
| .ack_interrupt = &marvell_ack_interrupt, | |
| .config_intr = &marvell_config_intr, | |
| }; | |
| static struct phy_info phy_info_genmii = { | |
| .phy_id = 0x00000000, | |
| .phy_id_mask = 0x00000000, | |
| .name = "Generic MII", | |
| .features = MII_BASIC_FEATURES, | |
| .config_aneg = genmii_config_aneg, | |
| .read_status = genmii_read_status, | |
| }; | |
| static struct phy_info *phy_info[] = { | |
| &phy_info_cis820x, | |
| &phy_info_marvell, | |
| &phy_info_dm9161, | |
| &phy_info_dm9161a, | |
| &phy_info_genmii, | |
| NULL | |
| }; | |
| u16 phy_read(struct ugeth_mii_info *mii_info, u16 regnum) | |
| { | |
| u16 retval; | |
| unsigned long flags; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| spin_lock_irqsave(&mii_info->mdio_lock, flags); | |
| retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum); | |
| spin_unlock_irqrestore(&mii_info->mdio_lock, flags); | |
| return retval; | |
| } | |
| void phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val) | |
| { | |
| unsigned long flags; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| spin_lock_irqsave(&mii_info->mdio_lock, flags); | |
| mii_info->mdio_write(mii_info->dev, mii_info->mii_id, regnum, val); | |
| spin_unlock_irqrestore(&mii_info->mdio_lock, flags); | |
| } | |
| /* Use the PHY ID registers to determine what type of PHY is attached | |
| * to device dev. return a struct phy_info structure describing that PHY | |
| */ | |
| struct phy_info *get_phy_info(struct ugeth_mii_info *mii_info) | |
| { | |
| u16 phy_reg; | |
| u32 phy_ID; | |
| int i; | |
| struct phy_info *theInfo = NULL; | |
| struct net_device *dev = mii_info->dev; | |
| ugphy_vdbg("%s: IN", __FUNCTION__); | |
| /* Grab the bits from PHYIR1, and put them in the upper half */ | |
| phy_reg = phy_read(mii_info, MII_PHYSID1); | |
| phy_ID = (phy_reg & 0xffff) << 16; | |
| /* Grab the bits from PHYIR2, and put them in the lower half */ | |
| phy_reg = phy_read(mii_info, MII_PHYSID2); | |
| phy_ID |= (phy_reg & 0xffff); | |
| /* loop through all the known PHY types, and find one that */ | |
| /* matches the ID we read from the PHY. */ | |
| for (i = 0; phy_info[i]; i++) | |
| if (phy_info[i]->phy_id == (phy_ID & phy_info[i]->phy_id_mask)){ | |
| theInfo = phy_info[i]; | |
| break; | |
| } | |
| /* This shouldn't happen, as we have generic PHY support */ | |
| if (theInfo == NULL) { | |
| ugphy_info("%s: PHY id %x is not supported!", dev->name, | |
| phy_ID); | |
| return NULL; | |
| } else { | |
| ugphy_info("%s: PHY is %s (%x)", dev->name, theInfo->name, | |
| phy_ID); | |
| } | |
| return theInfo; | |
| } |