| /* | |
| * ACPI PCI HotPlug glue functions to ACPI CA subsystem | |
| * | |
| * Copyright (C) 2002,2003 Takayoshi Kochi (t-kochi@bq.jp.nec.com) | |
| * Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com) | |
| * Copyright (C) 2002,2003 NEC Corporation | |
| * Copyright (C) 2003-2005 Matthew Wilcox (matthew.wilcox@hp.com) | |
| * Copyright (C) 2003-2005 Hewlett Packard | |
| * Copyright (C) 2005 Rajesh Shah (rajesh.shah@intel.com) | |
| * Copyright (C) 2005 Intel Corporation | |
| * | |
| * All rights reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or (at | |
| * your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or | |
| * NON INFRINGEMENT. See the GNU General Public License for more | |
| * details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| * | |
| * Send feedback to <kristen.c.accardi@intel.com> | |
| * | |
| */ | |
| /* | |
| * Lifetime rules for pci_dev: | |
| * - The one in acpiphp_func has its refcount elevated by pci_get_slot() | |
| * when the driver is loaded or when an insertion event occurs. It loses | |
| * a refcount when its ejected or the driver unloads. | |
| * - The one in acpiphp_bridge has its refcount elevated by pci_get_slot() | |
| * when the bridge is scanned and it loses a refcount when the bridge | |
| * is removed. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/pci.h> | |
| #include <linux/pci_hotplug.h> | |
| #include <linux/smp_lock.h> | |
| #include <linux/mutex.h> | |
| #include "../pci.h" | |
| #include "acpiphp.h" | |
| static LIST_HEAD(bridge_list); | |
| static LIST_HEAD(ioapic_list); | |
| static DEFINE_SPINLOCK(ioapic_list_lock); | |
| #define MY_NAME "acpiphp_glue" | |
| static void handle_hotplug_event_bridge (acpi_handle, u32, void *); | |
| static void acpiphp_sanitize_bus(struct pci_bus *bus); | |
| static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus); | |
| static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context); | |
| /* | |
| * initialization & terminatation routines | |
| */ | |
| /** | |
| * is_ejectable - determine if a slot is ejectable | |
| * @handle: handle to acpi namespace | |
| * | |
| * Ejectable slot should satisfy at least these conditions: | |
| * | |
| * 1. has _ADR method | |
| * 2. has _EJ0 method | |
| * | |
| * optionally | |
| * | |
| * 1. has _STA method | |
| * 2. has _PS0 method | |
| * 3. has _PS3 method | |
| * 4. .. | |
| * | |
| */ | |
| static int is_ejectable(acpi_handle handle) | |
| { | |
| acpi_status status; | |
| acpi_handle tmp; | |
| status = acpi_get_handle(handle, "_ADR", &tmp); | |
| if (ACPI_FAILURE(status)) { | |
| return 0; | |
| } | |
| status = acpi_get_handle(handle, "_EJ0", &tmp); | |
| if (ACPI_FAILURE(status)) { | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| /* callback routine to check the existence of ejectable slots */ | |
| static acpi_status | |
| is_ejectable_slot(acpi_handle handle, u32 lvl, void *context, void **rv) | |
| { | |
| int *count = (int *)context; | |
| if (is_ejectable(handle)) { | |
| (*count)++; | |
| /* only one ejectable slot is enough */ | |
| return AE_CTRL_TERMINATE; | |
| } else { | |
| return AE_OK; | |
| } | |
| } | |
| /* callback routine to check for the existance of a pci dock device */ | |
| static acpi_status | |
| is_pci_dock_device(acpi_handle handle, u32 lvl, void *context, void **rv) | |
| { | |
| int *count = (int *)context; | |
| if (is_dock_device(handle)) { | |
| (*count)++; | |
| return AE_CTRL_TERMINATE; | |
| } else { | |
| return AE_OK; | |
| } | |
| } | |
| /* | |
| * the _DCK method can do funny things... and sometimes not | |
| * hah-hah funny. | |
| * | |
| * TBD - figure out a way to only call fixups for | |
| * systems that require them. | |
| */ | |
| static int post_dock_fixups(struct notifier_block *nb, unsigned long val, | |
| void *v) | |
| { | |
| struct acpiphp_func *func = container_of(nb, struct acpiphp_func, nb); | |
| struct pci_bus *bus = func->slot->bridge->pci_bus; | |
| u32 buses; | |
| if (!bus->self) | |
| return NOTIFY_OK; | |
| /* fixup bad _DCK function that rewrites | |
| * secondary bridge on slot | |
| */ | |
| pci_read_config_dword(bus->self, | |
| PCI_PRIMARY_BUS, | |
| &buses); | |
| if (((buses >> 8) & 0xff) != bus->secondary) { | |
| buses = (buses & 0xff000000) | |
| | ((unsigned int)(bus->primary) << 0) | |
| | ((unsigned int)(bus->secondary) << 8) | |
| | ((unsigned int)(bus->subordinate) << 16); | |
| pci_write_config_dword(bus->self, PCI_PRIMARY_BUS, buses); | |
| } | |
| return NOTIFY_OK; | |
| } | |
| /* callback routine to register each ACPI PCI slot object */ | |
| static acpi_status | |
| register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) | |
| { | |
| struct acpiphp_bridge *bridge = (struct acpiphp_bridge *)context; | |
| struct acpiphp_slot *slot; | |
| struct acpiphp_func *newfunc; | |
| acpi_handle tmp; | |
| acpi_status status = AE_OK; | |
| unsigned long adr, sun; | |
| int device, function, retval; | |
| status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr); | |
| if (ACPI_FAILURE(status)) | |
| return AE_OK; | |
| status = acpi_get_handle(handle, "_EJ0", &tmp); | |
| if (ACPI_FAILURE(status) && !(is_dock_device(handle))) | |
| return AE_OK; | |
| device = (adr >> 16) & 0xffff; | |
| function = adr & 0xffff; | |
| newfunc = kzalloc(sizeof(struct acpiphp_func), GFP_KERNEL); | |
| if (!newfunc) | |
| return AE_NO_MEMORY; | |
| INIT_LIST_HEAD(&newfunc->sibling); | |
| newfunc->handle = handle; | |
| newfunc->function = function; | |
| if (ACPI_SUCCESS(status)) | |
| newfunc->flags = FUNC_HAS_EJ0; | |
| if (ACPI_SUCCESS(acpi_get_handle(handle, "_STA", &tmp))) | |
| newfunc->flags |= FUNC_HAS_STA; | |
| if (ACPI_SUCCESS(acpi_get_handle(handle, "_PS0", &tmp))) | |
| newfunc->flags |= FUNC_HAS_PS0; | |
| if (ACPI_SUCCESS(acpi_get_handle(handle, "_PS3", &tmp))) | |
| newfunc->flags |= FUNC_HAS_PS3; | |
| if (ACPI_SUCCESS(acpi_get_handle(handle, "_DCK", &tmp))) | |
| newfunc->flags |= FUNC_HAS_DCK; | |
| status = acpi_evaluate_integer(handle, "_SUN", NULL, &sun); | |
| if (ACPI_FAILURE(status)) { | |
| /* | |
| * use the count of the number of slots we've found | |
| * for the number of the slot | |
| */ | |
| sun = bridge->nr_slots+1; | |
| } | |
| /* search for objects that share the same slot */ | |
| for (slot = bridge->slots; slot; slot = slot->next) | |
| if (slot->device == device) { | |
| if (slot->sun != sun) | |
| warn("sibling found, but _SUN doesn't match!\n"); | |
| break; | |
| } | |
| if (!slot) { | |
| slot = kzalloc(sizeof(struct acpiphp_slot), GFP_KERNEL); | |
| if (!slot) { | |
| kfree(newfunc); | |
| return AE_NO_MEMORY; | |
| } | |
| slot->bridge = bridge; | |
| slot->device = device; | |
| slot->sun = sun; | |
| INIT_LIST_HEAD(&slot->funcs); | |
| mutex_init(&slot->crit_sect); | |
| slot->next = bridge->slots; | |
| bridge->slots = slot; | |
| bridge->nr_slots++; | |
| dbg("found ACPI PCI Hotplug slot %d at PCI %04x:%02x:%02x\n", | |
| slot->sun, pci_domain_nr(bridge->pci_bus), | |
| bridge->pci_bus->number, slot->device); | |
| retval = acpiphp_register_hotplug_slot(slot); | |
| if (retval) { | |
| warn("acpiphp_register_hotplug_slot failed(err code = 0x%x)\n", retval); | |
| goto err_exit; | |
| } | |
| } | |
| newfunc->slot = slot; | |
| list_add_tail(&newfunc->sibling, &slot->funcs); | |
| /* associate corresponding pci_dev */ | |
| newfunc->pci_dev = pci_get_slot(bridge->pci_bus, | |
| PCI_DEVFN(device, function)); | |
| if (newfunc->pci_dev) { | |
| slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON); | |
| } | |
| if (is_dock_device(handle)) { | |
| /* we don't want to call this device's _EJ0 | |
| * because we want the dock notify handler | |
| * to call it after it calls _DCK | |
| */ | |
| newfunc->flags &= ~FUNC_HAS_EJ0; | |
| if (register_hotplug_dock_device(handle, | |
| handle_hotplug_event_func, newfunc)) | |
| dbg("failed to register dock device\n"); | |
| /* we need to be notified when dock events happen | |
| * outside of the hotplug operation, since we may | |
| * need to do fixups before we can hotplug. | |
| */ | |
| newfunc->nb.notifier_call = post_dock_fixups; | |
| if (register_dock_notifier(&newfunc->nb)) | |
| dbg("failed to register a dock notifier"); | |
| } | |
| /* install notify handler */ | |
| if (!(newfunc->flags & FUNC_HAS_DCK)) { | |
| status = acpi_install_notify_handler(handle, | |
| ACPI_SYSTEM_NOTIFY, | |
| handle_hotplug_event_func, | |
| newfunc); | |
| if (ACPI_FAILURE(status)) | |
| err("failed to register interrupt notify handler\n"); | |
| } else | |
| status = AE_OK; | |
| return status; | |
| err_exit: | |
| bridge->nr_slots--; | |
| bridge->slots = slot->next; | |
| kfree(slot); | |
| kfree(newfunc); | |
| return AE_OK; | |
| } | |
| /* see if it's worth looking at this bridge */ | |
| static int detect_ejectable_slots(acpi_handle *bridge_handle) | |
| { | |
| acpi_status status; | |
| int count; | |
| count = 0; | |
| /* only check slots defined directly below bridge object */ | |
| status = acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge_handle, (u32)1, | |
| is_ejectable_slot, (void *)&count, NULL); | |
| /* | |
| * we also need to add this bridge if there is a dock bridge or | |
| * other pci device on a dock station (removable) | |
| */ | |
| if (!count) | |
| status = acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge_handle, | |
| (u32)1, is_pci_dock_device, (void *)&count, | |
| NULL); | |
| return count; | |
| } | |
| /* decode ACPI 2.0 _HPP hot plug parameters */ | |
| static void decode_hpp(struct acpiphp_bridge *bridge) | |
| { | |
| acpi_status status; | |
| status = acpi_get_hp_params_from_firmware(bridge->pci_bus, &bridge->hpp); | |
| if (ACPI_FAILURE(status) || | |
| !bridge->hpp.t0 || (bridge->hpp.t0->revision > 1)) { | |
| /* use default numbers */ | |
| printk(KERN_WARNING | |
| "%s: Could not get hotplug parameters. Use defaults\n", | |
| __FUNCTION__); | |
| bridge->hpp.t0 = &bridge->hpp.type0_data; | |
| bridge->hpp.t0->revision = 0; | |
| bridge->hpp.t0->cache_line_size = 0x10; | |
| bridge->hpp.t0->latency_timer = 0x40; | |
| bridge->hpp.t0->enable_serr = 0; | |
| bridge->hpp.t0->enable_perr = 0; | |
| } | |
| } | |
| /* initialize miscellaneous stuff for both root and PCI-to-PCI bridge */ | |
| static void init_bridge_misc(struct acpiphp_bridge *bridge) | |
| { | |
| acpi_status status; | |
| /* decode ACPI 2.0 _HPP (hot plug parameters) */ | |
| decode_hpp(bridge); | |
| /* must be added to the list prior to calling register_slot */ | |
| list_add(&bridge->list, &bridge_list); | |
| /* register all slot objects under this bridge */ | |
| status = acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge->handle, (u32)1, | |
| register_slot, bridge, NULL); | |
| if (ACPI_FAILURE(status)) { | |
| list_del(&bridge->list); | |
| return; | |
| } | |
| /* install notify handler */ | |
| if (bridge->type != BRIDGE_TYPE_HOST) { | |
| if ((bridge->flags & BRIDGE_HAS_EJ0) && bridge->func) { | |
| status = acpi_remove_notify_handler(bridge->func->handle, | |
| ACPI_SYSTEM_NOTIFY, | |
| handle_hotplug_event_func); | |
| if (ACPI_FAILURE(status)) | |
| err("failed to remove notify handler\n"); | |
| } | |
| status = acpi_install_notify_handler(bridge->handle, | |
| ACPI_SYSTEM_NOTIFY, | |
| handle_hotplug_event_bridge, | |
| bridge); | |
| if (ACPI_FAILURE(status)) { | |
| err("failed to register interrupt notify handler\n"); | |
| } | |
| } | |
| } | |
| /* find acpiphp_func from acpiphp_bridge */ | |
| static struct acpiphp_func *acpiphp_bridge_handle_to_function(acpi_handle handle) | |
| { | |
| struct list_head *node, *l; | |
| struct acpiphp_bridge *bridge; | |
| struct acpiphp_slot *slot; | |
| struct acpiphp_func *func; | |
| list_for_each(node, &bridge_list) { | |
| bridge = list_entry(node, struct acpiphp_bridge, list); | |
| for (slot = bridge->slots; slot; slot = slot->next) { | |
| list_for_each(l, &slot->funcs) { | |
| func = list_entry(l, struct acpiphp_func, | |
| sibling); | |
| if (func->handle == handle) | |
| return func; | |
| } | |
| } | |
| } | |
| return NULL; | |
| } | |
| static inline void config_p2p_bridge_flags(struct acpiphp_bridge *bridge) | |
| { | |
| acpi_handle dummy_handle; | |
| if (ACPI_SUCCESS(acpi_get_handle(bridge->handle, | |
| "_STA", &dummy_handle))) | |
| bridge->flags |= BRIDGE_HAS_STA; | |
| if (ACPI_SUCCESS(acpi_get_handle(bridge->handle, | |
| "_EJ0", &dummy_handle))) | |
| bridge->flags |= BRIDGE_HAS_EJ0; | |
| if (ACPI_SUCCESS(acpi_get_handle(bridge->handle, | |
| "_PS0", &dummy_handle))) | |
| bridge->flags |= BRIDGE_HAS_PS0; | |
| if (ACPI_SUCCESS(acpi_get_handle(bridge->handle, | |
| "_PS3", &dummy_handle))) | |
| bridge->flags |= BRIDGE_HAS_PS3; | |
| /* is this ejectable p2p bridge? */ | |
| if (bridge->flags & BRIDGE_HAS_EJ0) { | |
| struct acpiphp_func *func; | |
| dbg("found ejectable p2p bridge\n"); | |
| /* make link between PCI bridge and PCI function */ | |
| func = acpiphp_bridge_handle_to_function(bridge->handle); | |
| if (!func) | |
| return; | |
| bridge->func = func; | |
| func->bridge = bridge; | |
| } | |
| } | |
| /* allocate and initialize host bridge data structure */ | |
| static void add_host_bridge(acpi_handle *handle, struct pci_bus *pci_bus) | |
| { | |
| struct acpiphp_bridge *bridge; | |
| bridge = kzalloc(sizeof(struct acpiphp_bridge), GFP_KERNEL); | |
| if (bridge == NULL) | |
| return; | |
| bridge->type = BRIDGE_TYPE_HOST; | |
| bridge->handle = handle; | |
| bridge->pci_bus = pci_bus; | |
| spin_lock_init(&bridge->res_lock); | |
| init_bridge_misc(bridge); | |
| } | |
| /* allocate and initialize PCI-to-PCI bridge data structure */ | |
| static void add_p2p_bridge(acpi_handle *handle, struct pci_dev *pci_dev) | |
| { | |
| struct acpiphp_bridge *bridge; | |
| bridge = kzalloc(sizeof(struct acpiphp_bridge), GFP_KERNEL); | |
| if (bridge == NULL) { | |
| err("out of memory\n"); | |
| return; | |
| } | |
| bridge->type = BRIDGE_TYPE_P2P; | |
| bridge->handle = handle; | |
| config_p2p_bridge_flags(bridge); | |
| bridge->pci_dev = pci_dev_get(pci_dev); | |
| bridge->pci_bus = pci_dev->subordinate; | |
| if (!bridge->pci_bus) { | |
| err("This is not a PCI-to-PCI bridge!\n"); | |
| goto err; | |
| } | |
| spin_lock_init(&bridge->res_lock); | |
| init_bridge_misc(bridge); | |
| return; | |
| err: | |
| pci_dev_put(pci_dev); | |
| kfree(bridge); | |
| return; | |
| } | |
| /* callback routine to find P2P bridges */ | |
| static acpi_status | |
| find_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv) | |
| { | |
| acpi_status status; | |
| acpi_handle dummy_handle; | |
| unsigned long tmp; | |
| int device, function; | |
| struct pci_dev *dev; | |
| struct pci_bus *pci_bus = context; | |
| status = acpi_get_handle(handle, "_ADR", &dummy_handle); | |
| if (ACPI_FAILURE(status)) | |
| return AE_OK; /* continue */ | |
| status = acpi_evaluate_integer(handle, "_ADR", NULL, &tmp); | |
| if (ACPI_FAILURE(status)) { | |
| dbg("%s: _ADR evaluation failure\n", __FUNCTION__); | |
| return AE_OK; | |
| } | |
| device = (tmp >> 16) & 0xffff; | |
| function = tmp & 0xffff; | |
| dev = pci_get_slot(pci_bus, PCI_DEVFN(device, function)); | |
| if (!dev || !dev->subordinate) | |
| goto out; | |
| /* check if this bridge has ejectable slots */ | |
| if ((detect_ejectable_slots(handle) > 0)) { | |
| dbg("found PCI-to-PCI bridge at PCI %s\n", pci_name(dev)); | |
| add_p2p_bridge(handle, dev); | |
| } | |
| /* search P2P bridges under this p2p bridge */ | |
| status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, | |
| find_p2p_bridge, dev->subordinate, NULL); | |
| if (ACPI_FAILURE(status)) | |
| warn("find_p2p_bridge failed (error code = 0x%x)\n", status); | |
| out: | |
| pci_dev_put(dev); | |
| return AE_OK; | |
| } | |
| /* find hot-pluggable slots, and then find P2P bridge */ | |
| static int add_bridge(acpi_handle handle) | |
| { | |
| acpi_status status; | |
| unsigned long tmp; | |
| int seg, bus; | |
| acpi_handle dummy_handle; | |
| struct pci_bus *pci_bus; | |
| /* if the bridge doesn't have _STA, we assume it is always there */ | |
| status = acpi_get_handle(handle, "_STA", &dummy_handle); | |
| if (ACPI_SUCCESS(status)) { | |
| status = acpi_evaluate_integer(handle, "_STA", NULL, &tmp); | |
| if (ACPI_FAILURE(status)) { | |
| dbg("%s: _STA evaluation failure\n", __FUNCTION__); | |
| return 0; | |
| } | |
| if ((tmp & ACPI_STA_FUNCTIONING) == 0) | |
| /* don't register this object */ | |
| return 0; | |
| } | |
| /* get PCI segment number */ | |
| status = acpi_evaluate_integer(handle, "_SEG", NULL, &tmp); | |
| seg = ACPI_SUCCESS(status) ? tmp : 0; | |
| /* get PCI bus number */ | |
| status = acpi_evaluate_integer(handle, "_BBN", NULL, &tmp); | |
| if (ACPI_SUCCESS(status)) { | |
| bus = tmp; | |
| } else { | |
| warn("can't get bus number, assuming 0\n"); | |
| bus = 0; | |
| } | |
| pci_bus = pci_find_bus(seg, bus); | |
| if (!pci_bus) { | |
| err("Can't find bus %04x:%02x\n", seg, bus); | |
| return 0; | |
| } | |
| /* check if this bridge has ejectable slots */ | |
| if (detect_ejectable_slots(handle) > 0) { | |
| dbg("found PCI host-bus bridge with hot-pluggable slots\n"); | |
| add_host_bridge(handle, pci_bus); | |
| } | |
| /* search P2P bridges under this host bridge */ | |
| status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, | |
| find_p2p_bridge, pci_bus, NULL); | |
| if (ACPI_FAILURE(status)) | |
| warn("find_p2p_bridge failed (error code = 0x%x)\n", status); | |
| return 0; | |
| } | |
| static struct acpiphp_bridge *acpiphp_handle_to_bridge(acpi_handle handle) | |
| { | |
| struct list_head *head; | |
| list_for_each(head, &bridge_list) { | |
| struct acpiphp_bridge *bridge = list_entry(head, | |
| struct acpiphp_bridge, list); | |
| if (bridge->handle == handle) | |
| return bridge; | |
| } | |
| return NULL; | |
| } | |
| static void cleanup_bridge(struct acpiphp_bridge *bridge) | |
| { | |
| struct list_head *list, *tmp; | |
| struct acpiphp_slot *slot; | |
| acpi_status status; | |
| acpi_handle handle = bridge->handle; | |
| status = acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, | |
| handle_hotplug_event_bridge); | |
| if (ACPI_FAILURE(status)) | |
| err("failed to remove notify handler\n"); | |
| if ((bridge->type != BRIDGE_TYPE_HOST) && | |
| ((bridge->flags & BRIDGE_HAS_EJ0) && bridge->func)) { | |
| status = acpi_install_notify_handler(bridge->func->handle, | |
| ACPI_SYSTEM_NOTIFY, | |
| handle_hotplug_event_func, | |
| bridge->func); | |
| if (ACPI_FAILURE(status)) | |
| err("failed to install interrupt notify handler\n"); | |
| } | |
| slot = bridge->slots; | |
| while (slot) { | |
| struct acpiphp_slot *next = slot->next; | |
| list_for_each_safe (list, tmp, &slot->funcs) { | |
| struct acpiphp_func *func; | |
| func = list_entry(list, struct acpiphp_func, sibling); | |
| if (is_dock_device(func->handle)) { | |
| unregister_hotplug_dock_device(func->handle); | |
| unregister_dock_notifier(&func->nb); | |
| } | |
| if (!(func->flags & FUNC_HAS_DCK)) { | |
| status = acpi_remove_notify_handler(func->handle, | |
| ACPI_SYSTEM_NOTIFY, | |
| handle_hotplug_event_func); | |
| if (ACPI_FAILURE(status)) | |
| err("failed to remove notify handler\n"); | |
| } | |
| pci_dev_put(func->pci_dev); | |
| list_del(list); | |
| kfree(func); | |
| } | |
| acpiphp_unregister_hotplug_slot(slot); | |
| list_del(&slot->funcs); | |
| kfree(slot); | |
| slot = next; | |
| } | |
| pci_dev_put(bridge->pci_dev); | |
| list_del(&bridge->list); | |
| kfree(bridge); | |
| } | |
| static acpi_status | |
| cleanup_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv) | |
| { | |
| struct acpiphp_bridge *bridge; | |
| /* cleanup p2p bridges under this P2P bridge | |
| in a depth-first manner */ | |
| acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, | |
| cleanup_p2p_bridge, NULL, NULL); | |
| if (!(bridge = acpiphp_handle_to_bridge(handle))) | |
| return AE_OK; | |
| cleanup_bridge(bridge); | |
| return AE_OK; | |
| } | |
| static void remove_bridge(acpi_handle handle) | |
| { | |
| struct acpiphp_bridge *bridge; | |
| /* cleanup p2p bridges under this host bridge | |
| in a depth-first manner */ | |
| acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, | |
| (u32)1, cleanup_p2p_bridge, NULL, NULL); | |
| bridge = acpiphp_handle_to_bridge(handle); | |
| if (bridge) | |
| cleanup_bridge(bridge); | |
| } | |
| static struct pci_dev * get_apic_pci_info(acpi_handle handle) | |
| { | |
| struct acpi_pci_id id; | |
| struct pci_bus *bus; | |
| struct pci_dev *dev; | |
| if (ACPI_FAILURE(acpi_get_pci_id(handle, &id))) | |
| return NULL; | |
| bus = pci_find_bus(id.segment, id.bus); | |
| if (!bus) | |
| return NULL; | |
| dev = pci_get_slot(bus, PCI_DEVFN(id.device, id.function)); | |
| if (!dev) | |
| return NULL; | |
| if ((dev->class != PCI_CLASS_SYSTEM_PIC_IOAPIC) && | |
| (dev->class != PCI_CLASS_SYSTEM_PIC_IOXAPIC)) | |
| { | |
| pci_dev_put(dev); | |
| return NULL; | |
| } | |
| return dev; | |
| } | |
| static int get_gsi_base(acpi_handle handle, u32 *gsi_base) | |
| { | |
| acpi_status status; | |
| int result = -1; | |
| unsigned long gsb; | |
| struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; | |
| union acpi_object *obj; | |
| void *table; | |
| status = acpi_evaluate_integer(handle, "_GSB", NULL, &gsb); | |
| if (ACPI_SUCCESS(status)) { | |
| *gsi_base = (u32)gsb; | |
| return 0; | |
| } | |
| status = acpi_evaluate_object(handle, "_MAT", NULL, &buffer); | |
| if (ACPI_FAILURE(status) || !buffer.length || !buffer.pointer) | |
| return -1; | |
| obj = buffer.pointer; | |
| if (obj->type != ACPI_TYPE_BUFFER) | |
| goto out; | |
| table = obj->buffer.pointer; | |
| switch (((acpi_table_entry_header *)table)->type) { | |
| case ACPI_MADT_IOSAPIC: | |
| *gsi_base = ((struct acpi_table_iosapic *)table)->global_irq_base; | |
| result = 0; | |
| break; | |
| case ACPI_MADT_IOAPIC: | |
| *gsi_base = ((struct acpi_table_ioapic *)table)->global_irq_base; | |
| result = 0; | |
| break; | |
| default: | |
| break; | |
| } | |
| out: | |
| kfree(buffer.pointer); | |
| return result; | |
| } | |
| static acpi_status | |
| ioapic_add(acpi_handle handle, u32 lvl, void *context, void **rv) | |
| { | |
| acpi_status status; | |
| unsigned long sta; | |
| acpi_handle tmp; | |
| struct pci_dev *pdev; | |
| u32 gsi_base; | |
| u64 phys_addr; | |
| struct acpiphp_ioapic *ioapic; | |
| /* Evaluate _STA if present */ | |
| status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); | |
| if (ACPI_SUCCESS(status) && sta != ACPI_STA_ALL) | |
| return AE_CTRL_DEPTH; | |
| /* Scan only PCI bus scope */ | |
| status = acpi_get_handle(handle, "_HID", &tmp); | |
| if (ACPI_SUCCESS(status)) | |
| return AE_CTRL_DEPTH; | |
| if (get_gsi_base(handle, &gsi_base)) | |
| return AE_OK; | |
| ioapic = kmalloc(sizeof(*ioapic), GFP_KERNEL); | |
| if (!ioapic) | |
| return AE_NO_MEMORY; | |
| pdev = get_apic_pci_info(handle); | |
| if (!pdev) | |
| goto exit_kfree; | |
| if (pci_enable_device(pdev)) | |
| goto exit_pci_dev_put; | |
| pci_set_master(pdev); | |
| if (pci_request_region(pdev, 0, "I/O APIC(acpiphp)")) | |
| goto exit_pci_disable_device; | |
| phys_addr = pci_resource_start(pdev, 0); | |
| if (acpi_register_ioapic(handle, phys_addr, gsi_base)) | |
| goto exit_pci_release_region; | |
| ioapic->gsi_base = gsi_base; | |
| ioapic->dev = pdev; | |
| spin_lock(&ioapic_list_lock); | |
| list_add_tail(&ioapic->list, &ioapic_list); | |
| spin_unlock(&ioapic_list_lock); | |
| return AE_OK; | |
| exit_pci_release_region: | |
| pci_release_region(pdev, 0); | |
| exit_pci_disable_device: | |
| pci_disable_device(pdev); | |
| exit_pci_dev_put: | |
| pci_dev_put(pdev); | |
| exit_kfree: | |
| kfree(ioapic); | |
| return AE_OK; | |
| } | |
| static acpi_status | |
| ioapic_remove(acpi_handle handle, u32 lvl, void *context, void **rv) | |
| { | |
| acpi_status status; | |
| unsigned long sta; | |
| acpi_handle tmp; | |
| u32 gsi_base; | |
| struct acpiphp_ioapic *pos, *n, *ioapic = NULL; | |
| /* Evaluate _STA if present */ | |
| status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); | |
| if (ACPI_SUCCESS(status) && sta != ACPI_STA_ALL) | |
| return AE_CTRL_DEPTH; | |
| /* Scan only PCI bus scope */ | |
| status = acpi_get_handle(handle, "_HID", &tmp); | |
| if (ACPI_SUCCESS(status)) | |
| return AE_CTRL_DEPTH; | |
| if (get_gsi_base(handle, &gsi_base)) | |
| return AE_OK; | |
| acpi_unregister_ioapic(handle, gsi_base); | |
| spin_lock(&ioapic_list_lock); | |
| list_for_each_entry_safe(pos, n, &ioapic_list, list) { | |
| if (pos->gsi_base != gsi_base) | |
| continue; | |
| ioapic = pos; | |
| list_del(&ioapic->list); | |
| break; | |
| } | |
| spin_unlock(&ioapic_list_lock); | |
| if (!ioapic) | |
| return AE_OK; | |
| pci_release_region(ioapic->dev, 0); | |
| pci_disable_device(ioapic->dev); | |
| pci_dev_put(ioapic->dev); | |
| kfree(ioapic); | |
| return AE_OK; | |
| } | |
| static int acpiphp_configure_ioapics(acpi_handle handle) | |
| { | |
| ioapic_add(handle, 0, NULL, NULL); | |
| acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, | |
| ACPI_UINT32_MAX, ioapic_add, NULL, NULL); | |
| return 0; | |
| } | |
| static int acpiphp_unconfigure_ioapics(acpi_handle handle) | |
| { | |
| ioapic_remove(handle, 0, NULL, NULL); | |
| acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, | |
| ACPI_UINT32_MAX, ioapic_remove, NULL, NULL); | |
| return 0; | |
| } | |
| static int power_on_slot(struct acpiphp_slot *slot) | |
| { | |
| acpi_status status; | |
| struct acpiphp_func *func; | |
| struct list_head *l; | |
| int retval = 0; | |
| /* if already enabled, just skip */ | |
| if (slot->flags & SLOT_POWEREDON) | |
| goto err_exit; | |
| list_for_each (l, &slot->funcs) { | |
| func = list_entry(l, struct acpiphp_func, sibling); | |
| if (func->flags & FUNC_HAS_PS0) { | |
| dbg("%s: executing _PS0\n", __FUNCTION__); | |
| status = acpi_evaluate_object(func->handle, "_PS0", NULL, NULL); | |
| if (ACPI_FAILURE(status)) { | |
| warn("%s: _PS0 failed\n", __FUNCTION__); | |
| retval = -1; | |
| goto err_exit; | |
| } else | |
| break; | |
| } | |
| } | |
| /* TBD: evaluate _STA to check if the slot is enabled */ | |
| slot->flags |= SLOT_POWEREDON; | |
| err_exit: | |
| return retval; | |
| } | |
| static int power_off_slot(struct acpiphp_slot *slot) | |
| { | |
| acpi_status status; | |
| struct acpiphp_func *func; | |
| struct list_head *l; | |
| int retval = 0; | |
| /* if already disabled, just skip */ | |
| if ((slot->flags & SLOT_POWEREDON) == 0) | |
| goto err_exit; | |
| list_for_each (l, &slot->funcs) { | |
| func = list_entry(l, struct acpiphp_func, sibling); | |
| if (func->flags & FUNC_HAS_PS3) { | |
| status = acpi_evaluate_object(func->handle, "_PS3", NULL, NULL); | |
| if (ACPI_FAILURE(status)) { | |
| warn("%s: _PS3 failed\n", __FUNCTION__); | |
| retval = -1; | |
| goto err_exit; | |
| } else | |
| break; | |
| } | |
| } | |
| /* TBD: evaluate _STA to check if the slot is disabled */ | |
| slot->flags &= (~SLOT_POWEREDON); | |
| err_exit: | |
| return retval; | |
| } | |
| /** | |
| * acpiphp_max_busnr - return the highest reserved bus number under | |
| * the given bus. | |
| * @bus: bus to start search with | |
| * | |
| */ | |
| static unsigned char acpiphp_max_busnr(struct pci_bus *bus) | |
| { | |
| struct list_head *tmp; | |
| unsigned char max, n; | |
| /* | |
| * pci_bus_max_busnr will return the highest | |
| * reserved busnr for all these children. | |
| * that is equivalent to the bus->subordinate | |
| * value. We don't want to use the parent's | |
| * bus->subordinate value because it could have | |
| * padding in it. | |
| */ | |
| max = bus->secondary; | |
| list_for_each(tmp, &bus->children) { | |
| n = pci_bus_max_busnr(pci_bus_b(tmp)); | |
| if (n > max) | |
| max = n; | |
| } | |
| return max; | |
| } | |
| /** | |
| * acpiphp_bus_add - add a new bus to acpi subsystem | |
| * @func: acpiphp_func of the bridge | |
| * | |
| */ | |
| static int acpiphp_bus_add(struct acpiphp_func *func) | |
| { | |
| acpi_handle phandle; | |
| struct acpi_device *device, *pdevice; | |
| int ret_val; | |
| acpi_get_parent(func->handle, &phandle); | |
| if (acpi_bus_get_device(phandle, &pdevice)) { | |
| dbg("no parent device, assuming NULL\n"); | |
| pdevice = NULL; | |
| } | |
| if (!acpi_bus_get_device(func->handle, &device)) { | |
| dbg("bus exists... trim\n"); | |
| /* this shouldn't be in here, so remove | |
| * the bus then re-add it... | |
| */ | |
| ret_val = acpi_bus_trim(device, 1); | |
| dbg("acpi_bus_trim return %x\n", ret_val); | |
| } | |
| ret_val = acpi_bus_add(&device, pdevice, func->handle, | |
| ACPI_BUS_TYPE_DEVICE); | |
| if (ret_val) { | |
| dbg("error adding bus, %x\n", | |
| -ret_val); | |
| goto acpiphp_bus_add_out; | |
| } | |
| /* | |
| * try to start anyway. We could have failed to add | |
| * simply because this bus had previously been added | |
| * on another add. Don't bother with the return value | |
| * we just keep going. | |
| */ | |
| ret_val = acpi_bus_start(device); | |
| acpiphp_bus_add_out: | |
| return ret_val; | |
| } | |
| /** | |
| * acpiphp_bus_trim - trim a bus from acpi subsystem | |
| * @handle: handle to acpi namespace | |
| * | |
| */ | |
| static int acpiphp_bus_trim(acpi_handle handle) | |
| { | |
| struct acpi_device *device; | |
| int retval; | |
| retval = acpi_bus_get_device(handle, &device); | |
| if (retval) { | |
| dbg("acpi_device not found\n"); | |
| return retval; | |
| } | |
| retval = acpi_bus_trim(device, 1); | |
| if (retval) | |
| err("cannot remove from acpi list\n"); | |
| return retval; | |
| } | |
| /** | |
| * enable_device - enable, configure a slot | |
| * @slot: slot to be enabled | |
| * | |
| * This function should be called per *physical slot*, | |
| * not per each slot object in ACPI namespace. | |
| * | |
| */ | |
| static int enable_device(struct acpiphp_slot *slot) | |
| { | |
| struct pci_dev *dev; | |
| struct pci_bus *bus = slot->bridge->pci_bus; | |
| struct list_head *l; | |
| struct acpiphp_func *func; | |
| int retval = 0; | |
| int num, max, pass; | |
| acpi_status status; | |
| if (slot->flags & SLOT_ENABLED) | |
| goto err_exit; | |
| /* sanity check: dev should be NULL when hot-plugged in */ | |
| dev = pci_get_slot(bus, PCI_DEVFN(slot->device, 0)); | |
| if (dev) { | |
| /* This case shouldn't happen */ | |
| err("pci_dev structure already exists.\n"); | |
| pci_dev_put(dev); | |
| retval = -1; | |
| goto err_exit; | |
| } | |
| num = pci_scan_slot(bus, PCI_DEVFN(slot->device, 0)); | |
| if (num == 0) { | |
| err("No new device found\n"); | |
| retval = -1; | |
| goto err_exit; | |
| } | |
| max = acpiphp_max_busnr(bus); | |
| for (pass = 0; pass < 2; pass++) { | |
| list_for_each_entry(dev, &bus->devices, bus_list) { | |
| if (PCI_SLOT(dev->devfn) != slot->device) | |
| continue; | |
| if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || | |
| dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) { | |
| max = pci_scan_bridge(bus, dev, max, pass); | |
| if (pass && dev->subordinate) | |
| pci_bus_size_bridges(dev->subordinate); | |
| } | |
| } | |
| } | |
| list_for_each (l, &slot->funcs) { | |
| func = list_entry(l, struct acpiphp_func, sibling); | |
| acpiphp_bus_add(func); | |
| } | |
| pci_bus_assign_resources(bus); | |
| acpiphp_sanitize_bus(bus); | |
| acpiphp_set_hpp_values(slot->bridge->handle, bus); | |
| list_for_each_entry(func, &slot->funcs, sibling) | |
| acpiphp_configure_ioapics(func->handle); | |
| pci_enable_bridges(bus); | |
| pci_bus_add_devices(bus); | |
| /* associate pci_dev to our representation */ | |
| list_for_each (l, &slot->funcs) { | |
| func = list_entry(l, struct acpiphp_func, sibling); | |
| func->pci_dev = pci_get_slot(bus, PCI_DEVFN(slot->device, | |
| func->function)); | |
| if (!func->pci_dev) | |
| continue; | |
| if (func->pci_dev->hdr_type != PCI_HEADER_TYPE_BRIDGE && | |
| func->pci_dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) | |
| continue; | |
| status = find_p2p_bridge(func->handle, (u32)1, bus, NULL); | |
| if (ACPI_FAILURE(status)) | |
| warn("find_p2p_bridge failed (error code = 0x%x)\n", | |
| status); | |
| } | |
| slot->flags |= SLOT_ENABLED; | |
| err_exit: | |
| return retval; | |
| } | |
| static void disable_bridges(struct pci_bus *bus) | |
| { | |
| struct pci_dev *dev; | |
| list_for_each_entry(dev, &bus->devices, bus_list) { | |
| if (dev->subordinate) { | |
| disable_bridges(dev->subordinate); | |
| pci_disable_device(dev); | |
| } | |
| } | |
| } | |
| /** | |
| * disable_device - disable a slot | |
| */ | |
| static int disable_device(struct acpiphp_slot *slot) | |
| { | |
| int retval = 0; | |
| struct acpiphp_func *func; | |
| struct list_head *l; | |
| /* is this slot already disabled? */ | |
| if (!(slot->flags & SLOT_ENABLED)) | |
| goto err_exit; | |
| list_for_each (l, &slot->funcs) { | |
| func = list_entry(l, struct acpiphp_func, sibling); | |
| if (func->bridge) { | |
| /* cleanup p2p bridges under this P2P bridge */ | |
| cleanup_p2p_bridge(func->bridge->handle, | |
| (u32)1, NULL, NULL); | |
| func->bridge = NULL; | |
| } | |
| if (func->pci_dev) { | |
| pci_stop_bus_device(func->pci_dev); | |
| if (func->pci_dev->subordinate) { | |
| disable_bridges(func->pci_dev->subordinate); | |
| pci_disable_device(func->pci_dev); | |
| } | |
| } | |
| } | |
| list_for_each (l, &slot->funcs) { | |
| func = list_entry(l, struct acpiphp_func, sibling); | |
| acpiphp_unconfigure_ioapics(func->handle); | |
| acpiphp_bus_trim(func->handle); | |
| /* try to remove anyway. | |
| * acpiphp_bus_add might have been failed */ | |
| if (!func->pci_dev) | |
| continue; | |
| pci_remove_bus_device(func->pci_dev); | |
| pci_dev_put(func->pci_dev); | |
| func->pci_dev = NULL; | |
| } | |
| slot->flags &= (~SLOT_ENABLED); | |
| err_exit: | |
| return retval; | |
| } | |
| /** | |
| * get_slot_status - get ACPI slot status | |
| * | |
| * if a slot has _STA for each function and if any one of them | |
| * returned non-zero status, return it | |
| * | |
| * if a slot doesn't have _STA and if any one of its functions' | |
| * configuration space is configured, return 0x0f as a _STA | |
| * | |
| * otherwise return 0 | |
| */ | |
| static unsigned int get_slot_status(struct acpiphp_slot *slot) | |
| { | |
| acpi_status status; | |
| unsigned long sta = 0; | |
| u32 dvid; | |
| struct list_head *l; | |
| struct acpiphp_func *func; | |
| list_for_each (l, &slot->funcs) { | |
| func = list_entry(l, struct acpiphp_func, sibling); | |
| if (func->flags & FUNC_HAS_STA) { | |
| status = acpi_evaluate_integer(func->handle, "_STA", NULL, &sta); | |
| if (ACPI_SUCCESS(status) && sta) | |
| break; | |
| } else { | |
| pci_bus_read_config_dword(slot->bridge->pci_bus, | |
| PCI_DEVFN(slot->device, | |
| func->function), | |
| PCI_VENDOR_ID, &dvid); | |
| if (dvid != 0xffffffff) { | |
| sta = ACPI_STA_ALL; | |
| break; | |
| } | |
| } | |
| } | |
| return (unsigned int)sta; | |
| } | |
| /** | |
| * acpiphp_eject_slot - physically eject the slot | |
| */ | |
| static int acpiphp_eject_slot(struct acpiphp_slot *slot) | |
| { | |
| acpi_status status; | |
| struct acpiphp_func *func; | |
| struct list_head *l; | |
| struct acpi_object_list arg_list; | |
| union acpi_object arg; | |
| list_for_each (l, &slot->funcs) { | |
| func = list_entry(l, struct acpiphp_func, sibling); | |
| /* We don't want to call _EJ0 on non-existing functions. */ | |
| if ((func->flags & FUNC_HAS_EJ0)) { | |
| /* _EJ0 method take one argument */ | |
| arg_list.count = 1; | |
| arg_list.pointer = &arg; | |
| arg.type = ACPI_TYPE_INTEGER; | |
| arg.integer.value = 1; | |
| status = acpi_evaluate_object(func->handle, "_EJ0", &arg_list, NULL); | |
| if (ACPI_FAILURE(status)) { | |
| warn("%s: _EJ0 failed\n", __FUNCTION__); | |
| return -1; | |
| } else | |
| break; | |
| } | |
| } | |
| return 0; | |
| } | |
| /** | |
| * acpiphp_check_bridge - re-enumerate devices | |
| * | |
| * Iterate over all slots under this bridge and make sure that if a | |
| * card is present they are enabled, and if not they are disabled. | |
| */ | |
| static int acpiphp_check_bridge(struct acpiphp_bridge *bridge) | |
| { | |
| struct acpiphp_slot *slot; | |
| int retval = 0; | |
| int enabled, disabled; | |
| enabled = disabled = 0; | |
| for (slot = bridge->slots; slot; slot = slot->next) { | |
| unsigned int status = get_slot_status(slot); | |
| if (slot->flags & SLOT_ENABLED) { | |
| if (status == ACPI_STA_ALL) | |
| continue; | |
| retval = acpiphp_disable_slot(slot); | |
| if (retval) { | |
| err("Error occurred in disabling\n"); | |
| goto err_exit; | |
| } else { | |
| acpiphp_eject_slot(slot); | |
| } | |
| disabled++; | |
| } else { | |
| if (status != ACPI_STA_ALL) | |
| continue; | |
| retval = acpiphp_enable_slot(slot); | |
| if (retval) { | |
| err("Error occurred in enabling\n"); | |
| goto err_exit; | |
| } | |
| enabled++; | |
| } | |
| } | |
| dbg("%s: %d enabled, %d disabled\n", __FUNCTION__, enabled, disabled); | |
| err_exit: | |
| return retval; | |
| } | |
| static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge) | |
| { | |
| u16 pci_cmd, pci_bctl; | |
| struct pci_dev *cdev; | |
| /* Program hpp values for this device */ | |
| if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL || | |
| (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && | |
| (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI))) | |
| return; | |
| pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, | |
| bridge->hpp.t0->cache_line_size); | |
| pci_write_config_byte(dev, PCI_LATENCY_TIMER, | |
| bridge->hpp.t0->latency_timer); | |
| pci_read_config_word(dev, PCI_COMMAND, &pci_cmd); | |
| if (bridge->hpp.t0->enable_serr) | |
| pci_cmd |= PCI_COMMAND_SERR; | |
| else | |
| pci_cmd &= ~PCI_COMMAND_SERR; | |
| if (bridge->hpp.t0->enable_perr) | |
| pci_cmd |= PCI_COMMAND_PARITY; | |
| else | |
| pci_cmd &= ~PCI_COMMAND_PARITY; | |
| pci_write_config_word(dev, PCI_COMMAND, pci_cmd); | |
| /* Program bridge control value and child devices */ | |
| if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { | |
| pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, | |
| bridge->hpp.t0->latency_timer); | |
| pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl); | |
| if (bridge->hpp.t0->enable_serr) | |
| pci_bctl |= PCI_BRIDGE_CTL_SERR; | |
| else | |
| pci_bctl &= ~PCI_BRIDGE_CTL_SERR; | |
| if (bridge->hpp.t0->enable_perr) | |
| pci_bctl |= PCI_BRIDGE_CTL_PARITY; | |
| else | |
| pci_bctl &= ~PCI_BRIDGE_CTL_PARITY; | |
| pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl); | |
| if (dev->subordinate) { | |
| list_for_each_entry(cdev, &dev->subordinate->devices, | |
| bus_list) | |
| program_hpp(cdev, bridge); | |
| } | |
| } | |
| } | |
| static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus) | |
| { | |
| struct acpiphp_bridge bridge; | |
| struct pci_dev *dev; | |
| memset(&bridge, 0, sizeof(bridge)); | |
| bridge.handle = handle; | |
| bridge.pci_bus = bus; | |
| bridge.pci_dev = bus->self; | |
| decode_hpp(&bridge); | |
| list_for_each_entry(dev, &bus->devices, bus_list) | |
| program_hpp(dev, &bridge); | |
| } | |
| /* | |
| * Remove devices for which we could not assign resources, call | |
| * arch specific code to fix-up the bus | |
| */ | |
| static void acpiphp_sanitize_bus(struct pci_bus *bus) | |
| { | |
| struct pci_dev *dev; | |
| int i; | |
| unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM; | |
| list_for_each_entry(dev, &bus->devices, bus_list) { | |
| for (i=0; i<PCI_BRIDGE_RESOURCES; i++) { | |
| struct resource *res = &dev->resource[i]; | |
| if ((res->flags & type_mask) && !res->start && | |
| res->end) { | |
| /* Could not assign a required resources | |
| * for this device, remove it */ | |
| pci_remove_bus_device(dev); | |
| break; | |
| } | |
| } | |
| } | |
| } | |
| /* Program resources in newly inserted bridge */ | |
| static int acpiphp_configure_bridge (acpi_handle handle) | |
| { | |
| struct acpi_pci_id pci_id; | |
| struct pci_bus *bus; | |
| if (ACPI_FAILURE(acpi_get_pci_id(handle, &pci_id))) { | |
| err("cannot get PCI domain and bus number for bridge\n"); | |
| return -EINVAL; | |
| } | |
| bus = pci_find_bus(pci_id.segment, pci_id.bus); | |
| if (!bus) { | |
| err("cannot find bus %d:%d\n", | |
| pci_id.segment, pci_id.bus); | |
| return -EINVAL; | |
| } | |
| pci_bus_size_bridges(bus); | |
| pci_bus_assign_resources(bus); | |
| acpiphp_sanitize_bus(bus); | |
| acpiphp_set_hpp_values(handle, bus); | |
| pci_enable_bridges(bus); | |
| acpiphp_configure_ioapics(handle); | |
| return 0; | |
| } | |
| static void handle_bridge_insertion(acpi_handle handle, u32 type) | |
| { | |
| struct acpi_device *device, *pdevice; | |
| acpi_handle phandle; | |
| if ((type != ACPI_NOTIFY_BUS_CHECK) && | |
| (type != ACPI_NOTIFY_DEVICE_CHECK)) { | |
| err("unexpected notification type %d\n", type); | |
| return; | |
| } | |
| acpi_get_parent(handle, &phandle); | |
| if (acpi_bus_get_device(phandle, &pdevice)) { | |
| dbg("no parent device, assuming NULL\n"); | |
| pdevice = NULL; | |
| } | |
| if (acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE)) { | |
| err("cannot add bridge to acpi list\n"); | |
| return; | |
| } | |
| if (!acpiphp_configure_bridge(handle) && | |
| !acpi_bus_start(device)) | |
| add_bridge(handle); | |
| else | |
| err("cannot configure and start bridge\n"); | |
| } | |
| /* | |
| * ACPI event handlers | |
| */ | |
| /** | |
| * handle_hotplug_event_bridge - handle ACPI event on bridges | |
| * | |
| * @handle: Notify()'ed acpi_handle | |
| * @type: Notify code | |
| * @context: pointer to acpiphp_bridge structure | |
| * | |
| * handles ACPI event notification on {host,p2p} bridges | |
| * | |
| */ | |
| static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *context) | |
| { | |
| struct acpiphp_bridge *bridge; | |
| char objname[64]; | |
| struct acpi_buffer buffer = { .length = sizeof(objname), | |
| .pointer = objname }; | |
| struct acpi_device *device; | |
| if (acpi_bus_get_device(handle, &device)) { | |
| /* This bridge must have just been physically inserted */ | |
| handle_bridge_insertion(handle, type); | |
| return; | |
| } | |
| bridge = acpiphp_handle_to_bridge(handle); | |
| if (!bridge) { | |
| err("cannot get bridge info\n"); | |
| return; | |
| } | |
| acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); | |
| switch (type) { | |
| case ACPI_NOTIFY_BUS_CHECK: | |
| /* bus re-enumerate */ | |
| dbg("%s: Bus check notify on %s\n", __FUNCTION__, objname); | |
| acpiphp_check_bridge(bridge); | |
| break; | |
| case ACPI_NOTIFY_DEVICE_CHECK: | |
| /* device check */ | |
| dbg("%s: Device check notify on %s\n", __FUNCTION__, objname); | |
| acpiphp_check_bridge(bridge); | |
| break; | |
| case ACPI_NOTIFY_DEVICE_WAKE: | |
| /* wake event */ | |
| dbg("%s: Device wake notify on %s\n", __FUNCTION__, objname); | |
| break; | |
| case ACPI_NOTIFY_EJECT_REQUEST: | |
| /* request device eject */ | |
| dbg("%s: Device eject notify on %s\n", __FUNCTION__, objname); | |
| if ((bridge->type != BRIDGE_TYPE_HOST) && | |
| (bridge->flags & BRIDGE_HAS_EJ0)) { | |
| struct acpiphp_slot *slot; | |
| slot = bridge->func->slot; | |
| if (!acpiphp_disable_slot(slot)) | |
| acpiphp_eject_slot(slot); | |
| } | |
| break; | |
| case ACPI_NOTIFY_FREQUENCY_MISMATCH: | |
| printk(KERN_ERR "Device %s cannot be configured due" | |
| " to a frequency mismatch\n", objname); | |
| break; | |
| case ACPI_NOTIFY_BUS_MODE_MISMATCH: | |
| printk(KERN_ERR "Device %s cannot be configured due" | |
| " to a bus mode mismatch\n", objname); | |
| break; | |
| case ACPI_NOTIFY_POWER_FAULT: | |
| printk(KERN_ERR "Device %s has suffered a power fault\n", | |
| objname); | |
| break; | |
| default: | |
| warn("notify_handler: unknown event type 0x%x for %s\n", type, objname); | |
| break; | |
| } | |
| } | |
| /** | |
| * handle_hotplug_event_func - handle ACPI event on functions (i.e. slots) | |
| * | |
| * @handle: Notify()'ed acpi_handle | |
| * @type: Notify code | |
| * @context: pointer to acpiphp_func structure | |
| * | |
| * handles ACPI event notification on slots | |
| * | |
| */ | |
| static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context) | |
| { | |
| struct acpiphp_func *func; | |
| char objname[64]; | |
| struct acpi_buffer buffer = { .length = sizeof(objname), | |
| .pointer = objname }; | |
| acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer); | |
| func = (struct acpiphp_func *)context; | |
| switch (type) { | |
| case ACPI_NOTIFY_BUS_CHECK: | |
| /* bus re-enumerate */ | |
| dbg("%s: Bus check notify on %s\n", __FUNCTION__, objname); | |
| acpiphp_enable_slot(func->slot); | |
| break; | |
| case ACPI_NOTIFY_DEVICE_CHECK: | |
| /* device check : re-enumerate from parent bus */ | |
| dbg("%s: Device check notify on %s\n", __FUNCTION__, objname); | |
| acpiphp_check_bridge(func->slot->bridge); | |
| break; | |
| case ACPI_NOTIFY_DEVICE_WAKE: | |
| /* wake event */ | |
| dbg("%s: Device wake notify on %s\n", __FUNCTION__, objname); | |
| break; | |
| case ACPI_NOTIFY_EJECT_REQUEST: | |
| /* request device eject */ | |
| dbg("%s: Device eject notify on %s\n", __FUNCTION__, objname); | |
| if (!(acpiphp_disable_slot(func->slot))) | |
| acpiphp_eject_slot(func->slot); | |
| break; | |
| default: | |
| warn("notify_handler: unknown event type 0x%x for %s\n", type, objname); | |
| break; | |
| } | |
| } | |
| static acpi_status | |
| find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) | |
| { | |
| int *count = (int *)context; | |
| if (acpi_root_bridge(handle)) { | |
| acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, | |
| handle_hotplug_event_bridge, NULL); | |
| (*count)++; | |
| } | |
| return AE_OK ; | |
| } | |
| static struct acpi_pci_driver acpi_pci_hp_driver = { | |
| .add = add_bridge, | |
| .remove = remove_bridge, | |
| }; | |
| /** | |
| * acpiphp_glue_init - initializes all PCI hotplug - ACPI glue data structures | |
| * | |
| */ | |
| int __init acpiphp_glue_init(void) | |
| { | |
| int num = 0; | |
| acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, | |
| ACPI_UINT32_MAX, find_root_bridges, &num, NULL); | |
| if (num <= 0) | |
| return -1; | |
| else | |
| acpi_pci_register_driver(&acpi_pci_hp_driver); | |
| return 0; | |
| } | |
| /** | |
| * acpiphp_glue_exit - terminates all PCI hotplug - ACPI glue data structures | |
| * | |
| * This function frees all data allocated in acpiphp_glue_init() | |
| */ | |
| void __exit acpiphp_glue_exit(void) | |
| { | |
| acpi_pci_unregister_driver(&acpi_pci_hp_driver); | |
| } | |
| /** | |
| * acpiphp_get_num_slots - count number of slots in a system | |
| */ | |
| int __init acpiphp_get_num_slots(void) | |
| { | |
| struct list_head *node; | |
| struct acpiphp_bridge *bridge; | |
| int num_slots; | |
| num_slots = 0; | |
| list_for_each (node, &bridge_list) { | |
| bridge = (struct acpiphp_bridge *)node; | |
| dbg("Bus %04x:%02x has %d slot%s\n", | |
| pci_domain_nr(bridge->pci_bus), | |
| bridge->pci_bus->number, bridge->nr_slots, | |
| bridge->nr_slots == 1 ? "" : "s"); | |
| num_slots += bridge->nr_slots; | |
| } | |
| dbg("Total %d slots\n", num_slots); | |
| return num_slots; | |
| } | |
| #if 0 | |
| /** | |
| * acpiphp_for_each_slot - call function for each slot | |
| * @fn: callback function | |
| * @data: context to be passed to callback function | |
| * | |
| */ | |
| static int acpiphp_for_each_slot(acpiphp_callback fn, void *data) | |
| { | |
| struct list_head *node; | |
| struct acpiphp_bridge *bridge; | |
| struct acpiphp_slot *slot; | |
| int retval = 0; | |
| list_for_each (node, &bridge_list) { | |
| bridge = (struct acpiphp_bridge *)node; | |
| for (slot = bridge->slots; slot; slot = slot->next) { | |
| retval = fn(slot, data); | |
| if (!retval) | |
| goto err_exit; | |
| } | |
| } | |
| err_exit: | |
| return retval; | |
| } | |
| #endif | |
| /** | |
| * acpiphp_enable_slot - power on slot | |
| */ | |
| int acpiphp_enable_slot(struct acpiphp_slot *slot) | |
| { | |
| int retval; | |
| mutex_lock(&slot->crit_sect); | |
| /* wake up all functions */ | |
| retval = power_on_slot(slot); | |
| if (retval) | |
| goto err_exit; | |
| if (get_slot_status(slot) == ACPI_STA_ALL) { | |
| /* configure all functions */ | |
| retval = enable_device(slot); | |
| if (retval) | |
| power_off_slot(slot); | |
| } else { | |
| dbg("%s: Slot status is not ACPI_STA_ALL\n", __FUNCTION__); | |
| power_off_slot(slot); | |
| } | |
| err_exit: | |
| mutex_unlock(&slot->crit_sect); | |
| return retval; | |
| } | |
| /** | |
| * acpiphp_disable_slot - power off slot | |
| */ | |
| int acpiphp_disable_slot(struct acpiphp_slot *slot) | |
| { | |
| int retval = 0; | |
| mutex_lock(&slot->crit_sect); | |
| /* unconfigure all functions */ | |
| retval = disable_device(slot); | |
| if (retval) | |
| goto err_exit; | |
| /* power off all functions */ | |
| retval = power_off_slot(slot); | |
| if (retval) | |
| goto err_exit; | |
| err_exit: | |
| mutex_unlock(&slot->crit_sect); | |
| return retval; | |
| } | |
| /* | |
| * slot enabled: 1 | |
| * slot disabled: 0 | |
| */ | |
| u8 acpiphp_get_power_status(struct acpiphp_slot *slot) | |
| { | |
| return (slot->flags & SLOT_POWEREDON); | |
| } | |
| /* | |
| * latch open: 1 | |
| * latch closed: 0 | |
| */ | |
| u8 acpiphp_get_latch_status(struct acpiphp_slot *slot) | |
| { | |
| unsigned int sta; | |
| sta = get_slot_status(slot); | |
| return (sta & ACPI_STA_SHOW_IN_UI) ? 0 : 1; | |
| } | |
| /* | |
| * adapter presence : 1 | |
| * absence : 0 | |
| */ | |
| u8 acpiphp_get_adapter_status(struct acpiphp_slot *slot) | |
| { | |
| unsigned int sta; | |
| sta = get_slot_status(slot); | |
| return (sta == 0) ? 0 : 1; | |
| } | |
| /* | |
| * pci address (seg/bus/dev) | |
| */ | |
| u32 acpiphp_get_address(struct acpiphp_slot *slot) | |
| { | |
| u32 address; | |
| struct pci_bus *pci_bus = slot->bridge->pci_bus; | |
| address = (pci_domain_nr(pci_bus) << 16) | | |
| (pci_bus->number << 8) | | |
| slot->device; | |
| return address; | |
| } |