| /* | |
| * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips. | |
| * | |
| * Copyright (C) 2005 James Chapman (ds1337 core) | |
| * Copyright (C) 2006 David Brownell | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/i2c.h> | |
| #include <linux/string.h> | |
| #include <linux/rtc.h> | |
| #include <linux/bcd.h> | |
| /* We can't determine type by probing, but if we expect pre-Linux code | |
| * to have set the chip up as a clock (turning on the oscillator and | |
| * setting the date and time), Linux can ignore the non-clock features. | |
| * That's a natural job for a factory or repair bench. | |
| * | |
| * If the I2C "force" mechanism is used, we assume the chip is a ds1337. | |
| * (Much better would be board-specific tables of I2C devices, along with | |
| * the platform_data drivers would use to sort such issues out.) | |
| */ | |
| enum ds_type { | |
| unknown = 0, | |
| ds_1307, /* or ds1338, ... */ | |
| ds_1337, /* or ds1339, ... */ | |
| ds_1340, /* or st m41t00, ... */ | |
| // rs5c372 too? different address... | |
| }; | |
| static unsigned short normal_i2c[] = { 0x68, I2C_CLIENT_END }; | |
| I2C_CLIENT_INSMOD; | |
| /* RTC registers don't differ much, except for the century flag */ | |
| #define DS1307_REG_SECS 0x00 /* 00-59 */ | |
| # define DS1307_BIT_CH 0x80 | |
| #define DS1307_REG_MIN 0x01 /* 00-59 */ | |
| #define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */ | |
| # define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */ | |
| # define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */ | |
| #define DS1307_REG_WDAY 0x03 /* 01-07 */ | |
| #define DS1307_REG_MDAY 0x04 /* 01-31 */ | |
| #define DS1307_REG_MONTH 0x05 /* 01-12 */ | |
| # define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */ | |
| #define DS1307_REG_YEAR 0x06 /* 00-99 */ | |
| /* Other registers (control, status, alarms, trickle charge, NVRAM, etc) | |
| * start at 7, and they differ a lot. Only control and status matter for RTC; | |
| * be careful using them. | |
| */ | |
| #define DS1307_REG_CONTROL 0x07 | |
| # define DS1307_BIT_OUT 0x80 | |
| # define DS1307_BIT_SQWE 0x10 | |
| # define DS1307_BIT_RS1 0x02 | |
| # define DS1307_BIT_RS0 0x01 | |
| #define DS1337_REG_CONTROL 0x0e | |
| # define DS1337_BIT_nEOSC 0x80 | |
| # define DS1337_BIT_RS2 0x10 | |
| # define DS1337_BIT_RS1 0x08 | |
| # define DS1337_BIT_INTCN 0x04 | |
| # define DS1337_BIT_A2IE 0x02 | |
| # define DS1337_BIT_A1IE 0x01 | |
| #define DS1337_REG_STATUS 0x0f | |
| # define DS1337_BIT_OSF 0x80 | |
| # define DS1337_BIT_A2I 0x02 | |
| # define DS1337_BIT_A1I 0x01 | |
| #define DS1339_REG_TRICKLE 0x10 | |
| struct ds1307 { | |
| u8 reg_addr; | |
| u8 regs[8]; | |
| enum ds_type type; | |
| struct i2c_msg msg[2]; | |
| struct i2c_client client; | |
| struct rtc_device *rtc; | |
| }; | |
| static int ds1307_get_time(struct device *dev, struct rtc_time *t) | |
| { | |
| struct ds1307 *ds1307 = dev_get_drvdata(dev); | |
| int tmp; | |
| /* read the RTC registers all at once */ | |
| ds1307->msg[1].flags = I2C_M_RD; | |
| ds1307->msg[1].len = 7; | |
| tmp = i2c_transfer(ds1307->client.adapter, ds1307->msg, 2); | |
| if (tmp != 2) { | |
| dev_err(dev, "%s error %d\n", "read", tmp); | |
| return -EIO; | |
| } | |
| dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", | |
| "read", | |
| ds1307->regs[0], ds1307->regs[1], | |
| ds1307->regs[2], ds1307->regs[3], | |
| ds1307->regs[4], ds1307->regs[5], | |
| ds1307->regs[6]); | |
| t->tm_sec = BCD2BIN(ds1307->regs[DS1307_REG_SECS] & 0x7f); | |
| t->tm_min = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f); | |
| tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f; | |
| t->tm_hour = BCD2BIN(tmp); | |
| t->tm_wday = BCD2BIN(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1; | |
| t->tm_mday = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f); | |
| tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f; | |
| t->tm_mon = BCD2BIN(tmp) - 1; | |
| /* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */ | |
| t->tm_year = BCD2BIN(ds1307->regs[DS1307_REG_YEAR]) + 100; | |
| dev_dbg(dev, "%s secs=%d, mins=%d, " | |
| "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", | |
| "read", t->tm_sec, t->tm_min, | |
| t->tm_hour, t->tm_mday, | |
| t->tm_mon, t->tm_year, t->tm_wday); | |
| return 0; | |
| } | |
| static int ds1307_set_time(struct device *dev, struct rtc_time *t) | |
| { | |
| struct ds1307 *ds1307 = dev_get_drvdata(dev); | |
| int result; | |
| int tmp; | |
| u8 *buf = ds1307->regs; | |
| dev_dbg(dev, "%s secs=%d, mins=%d, " | |
| "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", | |
| "write", t->tm_sec, t->tm_min, | |
| t->tm_hour, t->tm_mday, | |
| t->tm_mon, t->tm_year, t->tm_wday); | |
| *buf++ = 0; /* first register addr */ | |
| buf[DS1307_REG_SECS] = BIN2BCD(t->tm_sec); | |
| buf[DS1307_REG_MIN] = BIN2BCD(t->tm_min); | |
| buf[DS1307_REG_HOUR] = BIN2BCD(t->tm_hour); | |
| buf[DS1307_REG_WDAY] = BIN2BCD(t->tm_wday + 1); | |
| buf[DS1307_REG_MDAY] = BIN2BCD(t->tm_mday); | |
| buf[DS1307_REG_MONTH] = BIN2BCD(t->tm_mon + 1); | |
| /* assume 20YY not 19YY */ | |
| tmp = t->tm_year - 100; | |
| buf[DS1307_REG_YEAR] = BIN2BCD(tmp); | |
| if (ds1307->type == ds_1337) | |
| buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY; | |
| else if (ds1307->type == ds_1340) | |
| buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN | |
| | DS1340_BIT_CENTURY; | |
| ds1307->msg[1].flags = 0; | |
| ds1307->msg[1].len = 8; | |
| dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", | |
| "write", buf[0], buf[1], buf[2], buf[3], | |
| buf[4], buf[5], buf[6]); | |
| result = i2c_transfer(ds1307->client.adapter, &ds1307->msg[1], 1); | |
| if (result != 1) { | |
| dev_err(dev, "%s error %d\n", "write", tmp); | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| static const struct rtc_class_ops ds13xx_rtc_ops = { | |
| .read_time = ds1307_get_time, | |
| .set_time = ds1307_set_time, | |
| }; | |
| static struct i2c_driver ds1307_driver; | |
| static int __devinit | |
| ds1307_detect(struct i2c_adapter *adapter, int address, int kind) | |
| { | |
| struct ds1307 *ds1307; | |
| int err = -ENODEV; | |
| struct i2c_client *client; | |
| int tmp; | |
| if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL))) { | |
| err = -ENOMEM; | |
| goto exit; | |
| } | |
| client = &ds1307->client; | |
| client->addr = address; | |
| client->adapter = adapter; | |
| client->driver = &ds1307_driver; | |
| client->flags = 0; | |
| i2c_set_clientdata(client, ds1307); | |
| ds1307->msg[0].addr = client->addr; | |
| ds1307->msg[0].flags = 0; | |
| ds1307->msg[0].len = 1; | |
| ds1307->msg[0].buf = &ds1307->reg_addr; | |
| ds1307->msg[1].addr = client->addr; | |
| ds1307->msg[1].flags = I2C_M_RD; | |
| ds1307->msg[1].len = sizeof(ds1307->regs); | |
| ds1307->msg[1].buf = ds1307->regs; | |
| /* HACK: "force" implies "needs ds1337-style-oscillator setup" */ | |
| if (kind >= 0) { | |
| ds1307->type = ds_1337; | |
| ds1307->reg_addr = DS1337_REG_CONTROL; | |
| ds1307->msg[1].len = 2; | |
| tmp = i2c_transfer(client->adapter, ds1307->msg, 2); | |
| if (tmp != 2) { | |
| pr_debug("read error %d\n", tmp); | |
| err = -EIO; | |
| goto exit_free; | |
| } | |
| ds1307->reg_addr = 0; | |
| ds1307->msg[1].len = sizeof(ds1307->regs); | |
| /* oscillator is off; need to turn it on */ | |
| if ((ds1307->regs[0] & DS1337_BIT_nEOSC) | |
| || (ds1307->regs[1] & DS1337_BIT_OSF)) { | |
| printk(KERN_ERR "no ds1337 oscillator code\n"); | |
| goto exit_free; | |
| } | |
| } else | |
| ds1307->type = ds_1307; | |
| read_rtc: | |
| /* read RTC registers */ | |
| tmp = i2c_transfer(client->adapter, ds1307->msg, 2); | |
| if (tmp != 2) { | |
| pr_debug("read error %d\n", tmp); | |
| err = -EIO; | |
| goto exit_free; | |
| } | |
| /* minimal sanity checking; some chips (like DS1340) don't | |
| * specify the extra bits as must-be-zero, but there are | |
| * still a few values that are clearly out-of-range. | |
| */ | |
| tmp = ds1307->regs[DS1307_REG_SECS]; | |
| if (tmp & DS1307_BIT_CH) { | |
| if (ds1307->type && ds1307->type != ds_1307) { | |
| pr_debug("not a ds1307?\n"); | |
| goto exit_free; | |
| } | |
| ds1307->type = ds_1307; | |
| /* this partial initialization should work for ds1307, | |
| * ds1338, ds1340, st m41t00, and more. | |
| */ | |
| dev_warn(&client->dev, "oscillator started; SET TIME!\n"); | |
| i2c_smbus_write_byte_data(client, 0, 0); | |
| goto read_rtc; | |
| } | |
| tmp = BCD2BIN(tmp & 0x7f); | |
| if (tmp > 60) | |
| goto exit_free; | |
| tmp = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f); | |
| if (tmp > 60) | |
| goto exit_free; | |
| tmp = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f); | |
| if (tmp == 0 || tmp > 31) | |
| goto exit_free; | |
| tmp = BCD2BIN(ds1307->regs[DS1307_REG_MONTH] & 0x1f); | |
| if (tmp == 0 || tmp > 12) | |
| goto exit_free; | |
| /* force into in 24 hour mode (most chips) or | |
| * disable century bit (ds1340) | |
| */ | |
| tmp = ds1307->regs[DS1307_REG_HOUR]; | |
| if (tmp & (1 << 6)) { | |
| if (tmp & (1 << 5)) | |
| tmp = BCD2BIN(tmp & 0x1f) + 12; | |
| else | |
| tmp = BCD2BIN(tmp); | |
| i2c_smbus_write_byte_data(client, | |
| DS1307_REG_HOUR, | |
| BIN2BCD(tmp)); | |
| } | |
| /* FIXME chips like 1337 can generate alarm irqs too; those are | |
| * worth exposing through the API (especially when the irq is | |
| * wakeup-capable). | |
| */ | |
| switch (ds1307->type) { | |
| case unknown: | |
| strlcpy(client->name, "unknown", I2C_NAME_SIZE); | |
| break; | |
| case ds_1307: | |
| strlcpy(client->name, "ds1307", I2C_NAME_SIZE); | |
| break; | |
| case ds_1337: | |
| strlcpy(client->name, "ds1337", I2C_NAME_SIZE); | |
| break; | |
| case ds_1340: | |
| strlcpy(client->name, "ds1340", I2C_NAME_SIZE); | |
| break; | |
| } | |
| /* Tell the I2C layer a new client has arrived */ | |
| if ((err = i2c_attach_client(client))) | |
| goto exit_free; | |
| ds1307->rtc = rtc_device_register(client->name, &client->dev, | |
| &ds13xx_rtc_ops, THIS_MODULE); | |
| if (IS_ERR(ds1307->rtc)) { | |
| err = PTR_ERR(ds1307->rtc); | |
| dev_err(&client->dev, | |
| "unable to register the class device\n"); | |
| goto exit_detach; | |
| } | |
| return 0; | |
| exit_detach: | |
| i2c_detach_client(client); | |
| exit_free: | |
| kfree(ds1307); | |
| exit: | |
| return err; | |
| } | |
| static int __devinit | |
| ds1307_attach_adapter(struct i2c_adapter *adapter) | |
| { | |
| if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) | |
| return 0; | |
| return i2c_probe(adapter, &addr_data, ds1307_detect); | |
| } | |
| static int __devexit ds1307_detach_client(struct i2c_client *client) | |
| { | |
| int err; | |
| struct ds1307 *ds1307 = i2c_get_clientdata(client); | |
| rtc_device_unregister(ds1307->rtc); | |
| if ((err = i2c_detach_client(client))) | |
| return err; | |
| kfree(ds1307); | |
| return 0; | |
| } | |
| static struct i2c_driver ds1307_driver = { | |
| .driver = { | |
| .name = "ds1307", | |
| .owner = THIS_MODULE, | |
| }, | |
| .attach_adapter = ds1307_attach_adapter, | |
| .detach_client = __devexit_p(ds1307_detach_client), | |
| }; | |
| static int __init ds1307_init(void) | |
| { | |
| return i2c_add_driver(&ds1307_driver); | |
| } | |
| module_init(ds1307_init); | |
| static void __exit ds1307_exit(void) | |
| { | |
| i2c_del_driver(&ds1307_driver); | |
| } | |
| module_exit(ds1307_exit); | |
| MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips"); | |
| MODULE_LICENSE("GPL"); |