| /* | |
| * Character device driver for extended error reporting. | |
| * | |
| * Copyright (C) 2005 IBM Corporation | |
| * extended error reporting for DASD ECKD devices | |
| * Author(s): Stefan Weinhuber <wein@de.ibm.com> | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/fs.h> | |
| #include <linux/kernel.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/device.h> | |
| #include <linux/poll.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/semaphore.h> | |
| #include <asm/atomic.h> | |
| #include <asm/ebcdic.h> | |
| #include "dasd_int.h" | |
| #include "dasd_eckd.h" | |
| #ifdef PRINTK_HEADER | |
| #undef PRINTK_HEADER | |
| #endif /* PRINTK_HEADER */ | |
| #define PRINTK_HEADER "dasd(eer):" | |
| /* | |
| * SECTION: the internal buffer | |
| */ | |
| /* | |
| * The internal buffer is meant to store obaque blobs of data, so it does | |
| * not know of higher level concepts like triggers. | |
| * It consists of a number of pages that are used as a ringbuffer. Each data | |
| * blob is stored in a simple record that consists of an integer, which | |
| * contains the size of the following data, and the data bytes themselfes. | |
| * | |
| * To allow for multiple independent readers we create one internal buffer | |
| * each time the device is opened and destroy the buffer when the file is | |
| * closed again. The number of pages used for this buffer is determined by | |
| * the module parmeter eer_pages. | |
| * | |
| * One record can be written to a buffer by using the functions | |
| * - dasd_eer_start_record (one time per record to write the size to the | |
| * buffer and reserve the space for the data) | |
| * - dasd_eer_write_buffer (one or more times per record to write the data) | |
| * The data can be written in several steps but you will have to compute | |
| * the total size up front for the invocation of dasd_eer_start_record. | |
| * If the ringbuffer is full, dasd_eer_start_record will remove the required | |
| * number of old records. | |
| * | |
| * A record is typically read in two steps, first read the integer that | |
| * specifies the size of the following data, then read the data. | |
| * Both can be done by | |
| * - dasd_eer_read_buffer | |
| * | |
| * For all mentioned functions you need to get the bufferlock first and keep | |
| * it until a complete record is written or read. | |
| * | |
| * All information necessary to keep track of an internal buffer is kept in | |
| * a struct eerbuffer. The buffer specific to a file pointer is strored in | |
| * the private_data field of that file. To be able to write data to all | |
| * existing buffers, each buffer is also added to the bufferlist. | |
| * If the user does not want to read a complete record in one go, we have to | |
| * keep track of the rest of the record. residual stores the number of bytes | |
| * that are still to deliver. If the rest of the record is invalidated between | |
| * two reads then residual will be set to -1 so that the next read will fail. | |
| * All entries in the eerbuffer structure are protected with the bufferlock. | |
| * To avoid races between writing to a buffer on the one side and creating | |
| * and destroying buffers on the other side, the bufferlock must also be used | |
| * to protect the bufferlist. | |
| */ | |
| static int eer_pages = 5; | |
| module_param(eer_pages, int, S_IRUGO|S_IWUSR); | |
| struct eerbuffer { | |
| struct list_head list; | |
| char **buffer; | |
| int buffersize; | |
| int buffer_page_count; | |
| int head; | |
| int tail; | |
| int residual; | |
| }; | |
| static LIST_HEAD(bufferlist); | |
| static DEFINE_SPINLOCK(bufferlock); | |
| static DECLARE_WAIT_QUEUE_HEAD(dasd_eer_read_wait_queue); | |
| /* | |
| * How many free bytes are available on the buffer. | |
| * Needs to be called with bufferlock held. | |
| */ | |
| static int dasd_eer_get_free_bytes(struct eerbuffer *eerb) | |
| { | |
| if (eerb->head < eerb->tail) | |
| return eerb->tail - eerb->head - 1; | |
| return eerb->buffersize - eerb->head + eerb->tail -1; | |
| } | |
| /* | |
| * How many bytes of buffer space are used. | |
| * Needs to be called with bufferlock held. | |
| */ | |
| static int dasd_eer_get_filled_bytes(struct eerbuffer *eerb) | |
| { | |
| if (eerb->head >= eerb->tail) | |
| return eerb->head - eerb->tail; | |
| return eerb->buffersize - eerb->tail + eerb->head; | |
| } | |
| /* | |
| * The dasd_eer_write_buffer function just copies count bytes of data | |
| * to the buffer. Make sure to call dasd_eer_start_record first, to | |
| * make sure that enough free space is available. | |
| * Needs to be called with bufferlock held. | |
| */ | |
| static void dasd_eer_write_buffer(struct eerbuffer *eerb, | |
| char *data, int count) | |
| { | |
| unsigned long headindex,localhead; | |
| unsigned long rest, len; | |
| char *nextdata; | |
| nextdata = data; | |
| rest = count; | |
| while (rest > 0) { | |
| headindex = eerb->head / PAGE_SIZE; | |
| localhead = eerb->head % PAGE_SIZE; | |
| len = min(rest, PAGE_SIZE - localhead); | |
| memcpy(eerb->buffer[headindex]+localhead, nextdata, len); | |
| nextdata += len; | |
| rest -= len; | |
| eerb->head += len; | |
| if (eerb->head == eerb->buffersize) | |
| eerb->head = 0; /* wrap around */ | |
| BUG_ON(eerb->head > eerb->buffersize); | |
| } | |
| } | |
| /* | |
| * Needs to be called with bufferlock held. | |
| */ | |
| static int dasd_eer_read_buffer(struct eerbuffer *eerb, char *data, int count) | |
| { | |
| unsigned long tailindex,localtail; | |
| unsigned long rest, len, finalcount; | |
| char *nextdata; | |
| finalcount = min(count, dasd_eer_get_filled_bytes(eerb)); | |
| nextdata = data; | |
| rest = finalcount; | |
| while (rest > 0) { | |
| tailindex = eerb->tail / PAGE_SIZE; | |
| localtail = eerb->tail % PAGE_SIZE; | |
| len = min(rest, PAGE_SIZE - localtail); | |
| memcpy(nextdata, eerb->buffer[tailindex] + localtail, len); | |
| nextdata += len; | |
| rest -= len; | |
| eerb->tail += len; | |
| if (eerb->tail == eerb->buffersize) | |
| eerb->tail = 0; /* wrap around */ | |
| BUG_ON(eerb->tail > eerb->buffersize); | |
| } | |
| return finalcount; | |
| } | |
| /* | |
| * Whenever you want to write a blob of data to the internal buffer you | |
| * have to start by using this function first. It will write the number | |
| * of bytes that will be written to the buffer. If necessary it will remove | |
| * old records to make room for the new one. | |
| * Needs to be called with bufferlock held. | |
| */ | |
| static int dasd_eer_start_record(struct eerbuffer *eerb, int count) | |
| { | |
| int tailcount; | |
| if (count + sizeof(count) > eerb->buffersize) | |
| return -ENOMEM; | |
| while (dasd_eer_get_free_bytes(eerb) < count + sizeof(count)) { | |
| if (eerb->residual > 0) { | |
| eerb->tail += eerb->residual; | |
| if (eerb->tail >= eerb->buffersize) | |
| eerb->tail -= eerb->buffersize; | |
| eerb->residual = -1; | |
| } | |
| dasd_eer_read_buffer(eerb, (char *) &tailcount, | |
| sizeof(tailcount)); | |
| eerb->tail += tailcount; | |
| if (eerb->tail >= eerb->buffersize) | |
| eerb->tail -= eerb->buffersize; | |
| } | |
| dasd_eer_write_buffer(eerb, (char*) &count, sizeof(count)); | |
| return 0; | |
| }; | |
| /* | |
| * Release pages that are not used anymore. | |
| */ | |
| static void dasd_eer_free_buffer_pages(char **buf, int no_pages) | |
| { | |
| int i; | |
| for (i = 0; i < no_pages; i++) | |
| free_page((unsigned long) buf[i]); | |
| } | |
| /* | |
| * Allocate a new set of memory pages. | |
| */ | |
| static int dasd_eer_allocate_buffer_pages(char **buf, int no_pages) | |
| { | |
| int i; | |
| for (i = 0; i < no_pages; i++) { | |
| buf[i] = (char *) get_zeroed_page(GFP_KERNEL); | |
| if (!buf[i]) { | |
| dasd_eer_free_buffer_pages(buf, i); | |
| return -ENOMEM; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * SECTION: The extended error reporting functionality | |
| */ | |
| /* | |
| * When a DASD device driver wants to report an error, it calls the | |
| * function dasd_eer_write and gives the respective trigger ID as | |
| * parameter. Currently there are four kinds of triggers: | |
| * | |
| * DASD_EER_FATALERROR: all kinds of unrecoverable I/O problems | |
| * DASD_EER_PPRCSUSPEND: PPRC was suspended | |
| * DASD_EER_NOPATH: There is no path to the device left. | |
| * DASD_EER_STATECHANGE: The state of the device has changed. | |
| * | |
| * For the first three triggers all required information can be supplied by | |
| * the caller. For these triggers a record is written by the function | |
| * dasd_eer_write_standard_trigger. | |
| * | |
| * The DASD_EER_STATECHANGE trigger is special since a sense subsystem | |
| * status ccw need to be executed to gather the necessary sense data first. | |
| * The dasd_eer_snss function will queue the SNSS request and the request | |
| * callback will then call dasd_eer_write with the DASD_EER_STATCHANGE | |
| * trigger. | |
| * | |
| * To avoid memory allocations at runtime, the necessary memory is allocated | |
| * when the extended error reporting is enabled for a device (by | |
| * dasd_eer_probe). There is one sense subsystem status request for each | |
| * eer enabled DASD device. The presence of the cqr in device->eer_cqr | |
| * indicates that eer is enable for the device. The use of the snss request | |
| * is protected by the DASD_FLAG_EER_IN_USE bit. When this flag indicates | |
| * that the cqr is currently in use, dasd_eer_snss cannot start a second | |
| * request but sets the DASD_FLAG_EER_SNSS flag instead. The callback of | |
| * the SNSS request will check the bit and call dasd_eer_snss again. | |
| */ | |
| #define SNSS_DATA_SIZE 44 | |
| #define DASD_EER_BUSID_SIZE 10 | |
| struct dasd_eer_header { | |
| __u32 total_size; | |
| __u32 trigger; | |
| __u64 tv_sec; | |
| __u64 tv_usec; | |
| char busid[DASD_EER_BUSID_SIZE]; | |
| } __attribute__ ((packed)); | |
| /* | |
| * The following function can be used for those triggers that have | |
| * all necessary data available when the function is called. | |
| * If the parameter cqr is not NULL, the chain of requests will be searched | |
| * for valid sense data, and all valid sense data sets will be added to | |
| * the triggers data. | |
| */ | |
| static void dasd_eer_write_standard_trigger(struct dasd_device *device, | |
| struct dasd_ccw_req *cqr, | |
| int trigger) | |
| { | |
| struct dasd_ccw_req *temp_cqr; | |
| int data_size; | |
| struct timeval tv; | |
| struct dasd_eer_header header; | |
| unsigned long flags; | |
| struct eerbuffer *eerb; | |
| /* go through cqr chain and count the valid sense data sets */ | |
| data_size = 0; | |
| for (temp_cqr = cqr; temp_cqr; temp_cqr = temp_cqr->refers) | |
| if (temp_cqr->irb.esw.esw0.erw.cons) | |
| data_size += 32; | |
| header.total_size = sizeof(header) + data_size + 4; /* "EOR" */ | |
| header.trigger = trigger; | |
| do_gettimeofday(&tv); | |
| header.tv_sec = tv.tv_sec; | |
| header.tv_usec = tv.tv_usec; | |
| strncpy(header.busid, device->cdev->dev.bus_id, DASD_EER_BUSID_SIZE); | |
| spin_lock_irqsave(&bufferlock, flags); | |
| list_for_each_entry(eerb, &bufferlist, list) { | |
| dasd_eer_start_record(eerb, header.total_size); | |
| dasd_eer_write_buffer(eerb, (char *) &header, sizeof(header)); | |
| for (temp_cqr = cqr; temp_cqr; temp_cqr = temp_cqr->refers) | |
| if (temp_cqr->irb.esw.esw0.erw.cons) | |
| dasd_eer_write_buffer(eerb, cqr->irb.ecw, 32); | |
| dasd_eer_write_buffer(eerb, "EOR", 4); | |
| } | |
| spin_unlock_irqrestore(&bufferlock, flags); | |
| wake_up_interruptible(&dasd_eer_read_wait_queue); | |
| } | |
| /* | |
| * This function writes a DASD_EER_STATECHANGE trigger. | |
| */ | |
| static void dasd_eer_write_snss_trigger(struct dasd_device *device, | |
| struct dasd_ccw_req *cqr, | |
| int trigger) | |
| { | |
| int data_size; | |
| int snss_rc; | |
| struct timeval tv; | |
| struct dasd_eer_header header; | |
| unsigned long flags; | |
| struct eerbuffer *eerb; | |
| snss_rc = (cqr->status == DASD_CQR_FAILED) ? -EIO : 0; | |
| if (snss_rc) | |
| data_size = 0; | |
| else | |
| data_size = SNSS_DATA_SIZE; | |
| header.total_size = sizeof(header) + data_size + 4; /* "EOR" */ | |
| header.trigger = DASD_EER_STATECHANGE; | |
| do_gettimeofday(&tv); | |
| header.tv_sec = tv.tv_sec; | |
| header.tv_usec = tv.tv_usec; | |
| strncpy(header.busid, device->cdev->dev.bus_id, DASD_EER_BUSID_SIZE); | |
| spin_lock_irqsave(&bufferlock, flags); | |
| list_for_each_entry(eerb, &bufferlist, list) { | |
| dasd_eer_start_record(eerb, header.total_size); | |
| dasd_eer_write_buffer(eerb, (char *) &header , sizeof(header)); | |
| if (!snss_rc) | |
| dasd_eer_write_buffer(eerb, cqr->data, SNSS_DATA_SIZE); | |
| dasd_eer_write_buffer(eerb, "EOR", 4); | |
| } | |
| spin_unlock_irqrestore(&bufferlock, flags); | |
| wake_up_interruptible(&dasd_eer_read_wait_queue); | |
| } | |
| /* | |
| * This function is called for all triggers. It calls the appropriate | |
| * function that writes the actual trigger records. | |
| */ | |
| void dasd_eer_write(struct dasd_device *device, struct dasd_ccw_req *cqr, | |
| unsigned int id) | |
| { | |
| if (!device->eer_cqr) | |
| return; | |
| switch (id) { | |
| case DASD_EER_FATALERROR: | |
| case DASD_EER_PPRCSUSPEND: | |
| dasd_eer_write_standard_trigger(device, cqr, id); | |
| break; | |
| case DASD_EER_NOPATH: | |
| dasd_eer_write_standard_trigger(device, NULL, id); | |
| break; | |
| case DASD_EER_STATECHANGE: | |
| dasd_eer_write_snss_trigger(device, cqr, id); | |
| break; | |
| default: /* unknown trigger, so we write it without any sense data */ | |
| dasd_eer_write_standard_trigger(device, NULL, id); | |
| break; | |
| } | |
| } | |
| EXPORT_SYMBOL(dasd_eer_write); | |
| /* | |
| * Start a sense subsystem status request. | |
| * Needs to be called with the device held. | |
| */ | |
| void dasd_eer_snss(struct dasd_device *device) | |
| { | |
| struct dasd_ccw_req *cqr; | |
| cqr = device->eer_cqr; | |
| if (!cqr) /* Device not eer enabled. */ | |
| return; | |
| if (test_and_set_bit(DASD_FLAG_EER_IN_USE, &device->flags)) { | |
| /* Sense subsystem status request in use. */ | |
| set_bit(DASD_FLAG_EER_SNSS, &device->flags); | |
| return; | |
| } | |
| clear_bit(DASD_FLAG_EER_SNSS, &device->flags); | |
| cqr->status = DASD_CQR_QUEUED; | |
| list_add(&cqr->list, &device->ccw_queue); | |
| dasd_schedule_bh(device); | |
| } | |
| /* | |
| * Callback function for use with sense subsystem status request. | |
| */ | |
| static void dasd_eer_snss_cb(struct dasd_ccw_req *cqr, void *data) | |
| { | |
| struct dasd_device *device = cqr->device; | |
| unsigned long flags; | |
| dasd_eer_write(device, cqr, DASD_EER_STATECHANGE); | |
| spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); | |
| if (device->eer_cqr == cqr) { | |
| clear_bit(DASD_FLAG_EER_IN_USE, &device->flags); | |
| if (test_bit(DASD_FLAG_EER_SNSS, &device->flags)) | |
| /* Another SNSS has been requested in the meantime. */ | |
| dasd_eer_snss(device); | |
| cqr = NULL; | |
| } | |
| spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); | |
| if (cqr) | |
| /* | |
| * Extended error recovery has been switched off while | |
| * the SNSS request was running. It could even have | |
| * been switched off and on again in which case there | |
| * is a new ccw in device->eer_cqr. Free the "old" | |
| * snss request now. | |
| */ | |
| dasd_kfree_request(cqr, device); | |
| } | |
| /* | |
| * Enable error reporting on a given device. | |
| */ | |
| int dasd_eer_enable(struct dasd_device *device) | |
| { | |
| struct dasd_ccw_req *cqr; | |
| unsigned long flags; | |
| if (device->eer_cqr) | |
| return 0; | |
| if (!device->discipline || strcmp(device->discipline->name, "ECKD")) | |
| return -EPERM; /* FIXME: -EMEDIUMTYPE ? */ | |
| cqr = dasd_kmalloc_request("ECKD", 1 /* SNSS */, | |
| SNSS_DATA_SIZE, device); | |
| if (!cqr) | |
| return -ENOMEM; | |
| cqr->device = device; | |
| cqr->retries = 255; | |
| cqr->expires = 10 * HZ; | |
| cqr->cpaddr->cmd_code = DASD_ECKD_CCW_SNSS; | |
| cqr->cpaddr->count = SNSS_DATA_SIZE; | |
| cqr->cpaddr->flags = 0; | |
| cqr->cpaddr->cda = (__u32)(addr_t) cqr->data; | |
| cqr->buildclk = get_clock(); | |
| cqr->status = DASD_CQR_FILLED; | |
| cqr->callback = dasd_eer_snss_cb; | |
| spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); | |
| if (!device->eer_cqr) { | |
| device->eer_cqr = cqr; | |
| cqr = NULL; | |
| } | |
| spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); | |
| if (cqr) | |
| dasd_kfree_request(cqr, device); | |
| return 0; | |
| } | |
| /* | |
| * Disable error reporting on a given device. | |
| */ | |
| void dasd_eer_disable(struct dasd_device *device) | |
| { | |
| struct dasd_ccw_req *cqr; | |
| unsigned long flags; | |
| int in_use; | |
| if (!device->eer_cqr) | |
| return; | |
| spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); | |
| cqr = device->eer_cqr; | |
| device->eer_cqr = NULL; | |
| clear_bit(DASD_FLAG_EER_SNSS, &device->flags); | |
| in_use = test_and_clear_bit(DASD_FLAG_EER_IN_USE, &device->flags); | |
| spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); | |
| if (cqr && !in_use) | |
| dasd_kfree_request(cqr, device); | |
| } | |
| /* | |
| * SECTION: the device operations | |
| */ | |
| /* | |
| * On the one side we need a lock to access our internal buffer, on the | |
| * other side a copy_to_user can sleep. So we need to copy the data we have | |
| * to transfer in a readbuffer, which is protected by the readbuffer_mutex. | |
| */ | |
| static char readbuffer[PAGE_SIZE]; | |
| static DECLARE_MUTEX(readbuffer_mutex); | |
| static int dasd_eer_open(struct inode *inp, struct file *filp) | |
| { | |
| struct eerbuffer *eerb; | |
| unsigned long flags; | |
| eerb = kzalloc(sizeof(struct eerbuffer), GFP_KERNEL); | |
| if (!eerb) | |
| return -ENOMEM; | |
| eerb->buffer_page_count = eer_pages; | |
| if (eerb->buffer_page_count < 1 || | |
| eerb->buffer_page_count > INT_MAX / PAGE_SIZE) { | |
| kfree(eerb); | |
| MESSAGE(KERN_WARNING, "can't open device since module " | |
| "parameter eer_pages is smaller then 1 or" | |
| " bigger then %d", (int)(INT_MAX / PAGE_SIZE)); | |
| return -EINVAL; | |
| } | |
| eerb->buffersize = eerb->buffer_page_count * PAGE_SIZE; | |
| eerb->buffer = kmalloc(eerb->buffer_page_count * sizeof(char *), | |
| GFP_KERNEL); | |
| if (!eerb->buffer) { | |
| kfree(eerb); | |
| return -ENOMEM; | |
| } | |
| if (dasd_eer_allocate_buffer_pages(eerb->buffer, | |
| eerb->buffer_page_count)) { | |
| kfree(eerb->buffer); | |
| kfree(eerb); | |
| return -ENOMEM; | |
| } | |
| filp->private_data = eerb; | |
| spin_lock_irqsave(&bufferlock, flags); | |
| list_add(&eerb->list, &bufferlist); | |
| spin_unlock_irqrestore(&bufferlock, flags); | |
| return nonseekable_open(inp,filp); | |
| } | |
| static int dasd_eer_close(struct inode *inp, struct file *filp) | |
| { | |
| struct eerbuffer *eerb; | |
| unsigned long flags; | |
| eerb = (struct eerbuffer *) filp->private_data; | |
| spin_lock_irqsave(&bufferlock, flags); | |
| list_del(&eerb->list); | |
| spin_unlock_irqrestore(&bufferlock, flags); | |
| dasd_eer_free_buffer_pages(eerb->buffer, eerb->buffer_page_count); | |
| kfree(eerb->buffer); | |
| kfree(eerb); | |
| return 0; | |
| } | |
| static ssize_t dasd_eer_read(struct file *filp, char __user *buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| int tc,rc; | |
| int tailcount,effective_count; | |
| unsigned long flags; | |
| struct eerbuffer *eerb; | |
| eerb = (struct eerbuffer *) filp->private_data; | |
| if (down_interruptible(&readbuffer_mutex)) | |
| return -ERESTARTSYS; | |
| spin_lock_irqsave(&bufferlock, flags); | |
| if (eerb->residual < 0) { /* the remainder of this record */ | |
| /* has been deleted */ | |
| eerb->residual = 0; | |
| spin_unlock_irqrestore(&bufferlock, flags); | |
| up(&readbuffer_mutex); | |
| return -EIO; | |
| } else if (eerb->residual > 0) { | |
| /* OK we still have a second half of a record to deliver */ | |
| effective_count = min(eerb->residual, (int) count); | |
| eerb->residual -= effective_count; | |
| } else { | |
| tc = 0; | |
| while (!tc) { | |
| tc = dasd_eer_read_buffer(eerb, (char *) &tailcount, | |
| sizeof(tailcount)); | |
| if (!tc) { | |
| /* no data available */ | |
| spin_unlock_irqrestore(&bufferlock, flags); | |
| up(&readbuffer_mutex); | |
| if (filp->f_flags & O_NONBLOCK) | |
| return -EAGAIN; | |
| rc = wait_event_interruptible( | |
| dasd_eer_read_wait_queue, | |
| eerb->head != eerb->tail); | |
| if (rc) | |
| return rc; | |
| if (down_interruptible(&readbuffer_mutex)) | |
| return -ERESTARTSYS; | |
| spin_lock_irqsave(&bufferlock, flags); | |
| } | |
| } | |
| WARN_ON(tc != sizeof(tailcount)); | |
| effective_count = min(tailcount,(int)count); | |
| eerb->residual = tailcount - effective_count; | |
| } | |
| tc = dasd_eer_read_buffer(eerb, readbuffer, effective_count); | |
| WARN_ON(tc != effective_count); | |
| spin_unlock_irqrestore(&bufferlock, flags); | |
| if (copy_to_user(buf, readbuffer, effective_count)) { | |
| up(&readbuffer_mutex); | |
| return -EFAULT; | |
| } | |
| up(&readbuffer_mutex); | |
| return effective_count; | |
| } | |
| static unsigned int dasd_eer_poll(struct file *filp, poll_table *ptable) | |
| { | |
| unsigned int mask; | |
| unsigned long flags; | |
| struct eerbuffer *eerb; | |
| eerb = (struct eerbuffer *) filp->private_data; | |
| poll_wait(filp, &dasd_eer_read_wait_queue, ptable); | |
| spin_lock_irqsave(&bufferlock, flags); | |
| if (eerb->head != eerb->tail) | |
| mask = POLLIN | POLLRDNORM ; | |
| else | |
| mask = 0; | |
| spin_unlock_irqrestore(&bufferlock, flags); | |
| return mask; | |
| } | |
| static struct file_operations dasd_eer_fops = { | |
| .open = &dasd_eer_open, | |
| .release = &dasd_eer_close, | |
| .read = &dasd_eer_read, | |
| .poll = &dasd_eer_poll, | |
| .owner = THIS_MODULE, | |
| }; | |
| static struct miscdevice dasd_eer_dev = { | |
| .minor = MISC_DYNAMIC_MINOR, | |
| .name = "dasd_eer", | |
| .fops = &dasd_eer_fops, | |
| }; | |
| int __init dasd_eer_init(void) | |
| { | |
| int rc; | |
| rc = misc_register(&dasd_eer_dev); | |
| if (rc) { | |
| MESSAGE(KERN_ERR, "%s", "dasd_eer_init could not " | |
| "register misc device"); | |
| return rc; | |
| } | |
| return 0; | |
| } | |
| void dasd_eer_exit(void) | |
| { | |
| WARN_ON(misc_deregister(&dasd_eer_dev) != 0); | |
| } |