| /* | |
| * dcssblk.c -- the S/390 block driver for dcss memory | |
| * | |
| * Authors: Carsten Otte, Stefan Weinhuber, Gerald Schaefer | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/ctype.h> | |
| #include <linux/errno.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/blkdev.h> | |
| #include <asm/extmem.h> | |
| #include <asm/io.h> | |
| #include <linux/completion.h> | |
| #include <linux/interrupt.h> | |
| #include <asm/s390_rdev.h> | |
| //#define DCSSBLK_DEBUG /* Debug messages on/off */ | |
| #define DCSSBLK_NAME "dcssblk" | |
| #define DCSSBLK_MINORS_PER_DISK 1 | |
| #define DCSSBLK_PARM_LEN 400 | |
| #ifdef DCSSBLK_DEBUG | |
| #define PRINT_DEBUG(x...) printk(KERN_DEBUG DCSSBLK_NAME " debug: " x) | |
| #else | |
| #define PRINT_DEBUG(x...) do {} while (0) | |
| #endif | |
| #define PRINT_INFO(x...) printk(KERN_INFO DCSSBLK_NAME " info: " x) | |
| #define PRINT_WARN(x...) printk(KERN_WARNING DCSSBLK_NAME " warning: " x) | |
| #define PRINT_ERR(x...) printk(KERN_ERR DCSSBLK_NAME " error: " x) | |
| static int dcssblk_open(struct inode *inode, struct file *filp); | |
| static int dcssblk_release(struct inode *inode, struct file *filp); | |
| static int dcssblk_make_request(struct request_queue *q, struct bio *bio); | |
| static int dcssblk_direct_access(struct block_device *bdev, sector_t secnum, | |
| unsigned long *data); | |
| static char dcssblk_segments[DCSSBLK_PARM_LEN] = "\0"; | |
| static int dcssblk_major; | |
| static struct block_device_operations dcssblk_devops = { | |
| .owner = THIS_MODULE, | |
| .open = dcssblk_open, | |
| .release = dcssblk_release, | |
| .direct_access = dcssblk_direct_access, | |
| }; | |
| static ssize_t dcssblk_add_store(struct device * dev, struct device_attribute *attr, const char * buf, | |
| size_t count); | |
| static ssize_t dcssblk_remove_store(struct device * dev, struct device_attribute *attr, const char * buf, | |
| size_t count); | |
| static ssize_t dcssblk_save_store(struct device * dev, struct device_attribute *attr, const char * buf, | |
| size_t count); | |
| static ssize_t dcssblk_save_show(struct device *dev, struct device_attribute *attr, char *buf); | |
| static ssize_t dcssblk_shared_store(struct device * dev, struct device_attribute *attr, const char * buf, | |
| size_t count); | |
| static ssize_t dcssblk_shared_show(struct device *dev, struct device_attribute *attr, char *buf); | |
| static DEVICE_ATTR(add, S_IWUSR, NULL, dcssblk_add_store); | |
| static DEVICE_ATTR(remove, S_IWUSR, NULL, dcssblk_remove_store); | |
| static DEVICE_ATTR(save, S_IWUSR | S_IRUGO, dcssblk_save_show, | |
| dcssblk_save_store); | |
| static DEVICE_ATTR(shared, S_IWUSR | S_IRUGO, dcssblk_shared_show, | |
| dcssblk_shared_store); | |
| static struct device *dcssblk_root_dev; | |
| struct dcssblk_dev_info { | |
| struct list_head lh; | |
| struct device dev; | |
| char segment_name[BUS_ID_SIZE]; | |
| atomic_t use_count; | |
| struct gendisk *gd; | |
| unsigned long start; | |
| unsigned long end; | |
| int segment_type; | |
| unsigned char save_pending; | |
| unsigned char is_shared; | |
| struct request_queue *dcssblk_queue; | |
| }; | |
| static struct list_head dcssblk_devices = LIST_HEAD_INIT(dcssblk_devices); | |
| static struct rw_semaphore dcssblk_devices_sem; | |
| /* | |
| * release function for segment device. | |
| */ | |
| static void | |
| dcssblk_release_segment(struct device *dev) | |
| { | |
| PRINT_DEBUG("segment release fn called for %s\n", dev->bus_id); | |
| kfree(container_of(dev, struct dcssblk_dev_info, dev)); | |
| module_put(THIS_MODULE); | |
| } | |
| /* | |
| * get a minor number. needs to be called with | |
| * down_write(&dcssblk_devices_sem) and the | |
| * device needs to be enqueued before the semaphore is | |
| * freed. | |
| */ | |
| static inline int | |
| dcssblk_assign_free_minor(struct dcssblk_dev_info *dev_info) | |
| { | |
| int minor, found; | |
| struct dcssblk_dev_info *entry; | |
| if (dev_info == NULL) | |
| return -EINVAL; | |
| for (minor = 0; minor < (1<<MINORBITS); minor++) { | |
| found = 0; | |
| // test if minor available | |
| list_for_each_entry(entry, &dcssblk_devices, lh) | |
| if (minor == entry->gd->first_minor) | |
| found++; | |
| if (!found) break; // got unused minor | |
| } | |
| if (found) | |
| return -EBUSY; | |
| dev_info->gd->first_minor = minor; | |
| return 0; | |
| } | |
| /* | |
| * get the struct dcssblk_dev_info from dcssblk_devices | |
| * for the given name. | |
| * down_read(&dcssblk_devices_sem) must be held. | |
| */ | |
| static struct dcssblk_dev_info * | |
| dcssblk_get_device_by_name(char *name) | |
| { | |
| struct dcssblk_dev_info *entry; | |
| list_for_each_entry(entry, &dcssblk_devices, lh) { | |
| if (!strcmp(name, entry->segment_name)) { | |
| return entry; | |
| } | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * print appropriate error message for segment_load()/segment_type() | |
| * return code | |
| */ | |
| static void | |
| dcssblk_segment_warn(int rc, char* seg_name) | |
| { | |
| switch (rc) { | |
| case -ENOENT: | |
| PRINT_WARN("cannot load/query segment %s, does not exist\n", | |
| seg_name); | |
| break; | |
| case -ENOSYS: | |
| PRINT_WARN("cannot load/query segment %s, not running on VM\n", | |
| seg_name); | |
| break; | |
| case -EIO: | |
| PRINT_WARN("cannot load/query segment %s, hardware error\n", | |
| seg_name); | |
| break; | |
| case -ENOTSUPP: | |
| PRINT_WARN("cannot load/query segment %s, is a multi-part " | |
| "segment\n", seg_name); | |
| break; | |
| case -ENOSPC: | |
| PRINT_WARN("cannot load/query segment %s, overlaps with " | |
| "storage\n", seg_name); | |
| break; | |
| case -EBUSY: | |
| PRINT_WARN("cannot load/query segment %s, overlaps with " | |
| "already loaded dcss\n", seg_name); | |
| break; | |
| case -EPERM: | |
| PRINT_WARN("cannot load/query segment %s, already loaded in " | |
| "incompatible mode\n", seg_name); | |
| break; | |
| case -ENOMEM: | |
| PRINT_WARN("cannot load/query segment %s, out of memory\n", | |
| seg_name); | |
| break; | |
| case -ERANGE: | |
| PRINT_WARN("cannot load/query segment %s, exceeds kernel " | |
| "mapping range\n", seg_name); | |
| break; | |
| default: | |
| PRINT_WARN("cannot load/query segment %s, return value %i\n", | |
| seg_name, rc); | |
| break; | |
| } | |
| } | |
| /* | |
| * device attribute for switching shared/nonshared (exclusive) | |
| * operation (show + store) | |
| */ | |
| static ssize_t | |
| dcssblk_shared_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct dcssblk_dev_info *dev_info; | |
| dev_info = container_of(dev, struct dcssblk_dev_info, dev); | |
| return sprintf(buf, dev_info->is_shared ? "1\n" : "0\n"); | |
| } | |
| static ssize_t | |
| dcssblk_shared_store(struct device *dev, struct device_attribute *attr, const char *inbuf, size_t count) | |
| { | |
| struct dcssblk_dev_info *dev_info; | |
| int rc; | |
| if ((count > 1) && (inbuf[1] != '\n') && (inbuf[1] != '\0')) { | |
| PRINT_WARN("Invalid value, must be 0 or 1\n"); | |
| return -EINVAL; | |
| } | |
| down_write(&dcssblk_devices_sem); | |
| dev_info = container_of(dev, struct dcssblk_dev_info, dev); | |
| if (atomic_read(&dev_info->use_count)) { | |
| PRINT_ERR("share: segment %s is busy!\n", | |
| dev_info->segment_name); | |
| rc = -EBUSY; | |
| goto out; | |
| } | |
| if (inbuf[0] == '1') { | |
| // reload segment in shared mode | |
| rc = segment_modify_shared(dev_info->segment_name, | |
| SEGMENT_SHARED); | |
| if (rc < 0) { | |
| BUG_ON(rc == -EINVAL); | |
| if (rc == -EIO || rc == -ENOENT) | |
| goto removeseg; | |
| } else { | |
| dev_info->is_shared = 1; | |
| switch (dev_info->segment_type) { | |
| case SEG_TYPE_SR: | |
| case SEG_TYPE_ER: | |
| case SEG_TYPE_SC: | |
| set_disk_ro(dev_info->gd,1); | |
| } | |
| } | |
| } else if (inbuf[0] == '0') { | |
| // reload segment in exclusive mode | |
| if (dev_info->segment_type == SEG_TYPE_SC) { | |
| PRINT_ERR("Segment type SC (%s) cannot be loaded in " | |
| "non-shared mode\n", dev_info->segment_name); | |
| rc = -EINVAL; | |
| goto out; | |
| } | |
| rc = segment_modify_shared(dev_info->segment_name, | |
| SEGMENT_EXCLUSIVE); | |
| if (rc < 0) { | |
| BUG_ON(rc == -EINVAL); | |
| if (rc == -EIO || rc == -ENOENT) | |
| goto removeseg; | |
| } else { | |
| dev_info->is_shared = 0; | |
| set_disk_ro(dev_info->gd, 0); | |
| } | |
| } else { | |
| PRINT_WARN("Invalid value, must be 0 or 1\n"); | |
| rc = -EINVAL; | |
| goto out; | |
| } | |
| rc = count; | |
| goto out; | |
| removeseg: | |
| PRINT_ERR("Could not reload segment %s, removing it now!\n", | |
| dev_info->segment_name); | |
| list_del(&dev_info->lh); | |
| del_gendisk(dev_info->gd); | |
| blk_cleanup_queue(dev_info->dcssblk_queue); | |
| dev_info->gd->queue = NULL; | |
| put_disk(dev_info->gd); | |
| device_unregister(dev); | |
| put_device(dev); | |
| out: | |
| up_write(&dcssblk_devices_sem); | |
| return rc; | |
| } | |
| /* | |
| * device attribute for save operation on current copy | |
| * of the segment. If the segment is busy, saving will | |
| * become pending until it gets released, which can be | |
| * undone by storing a non-true value to this entry. | |
| * (show + store) | |
| */ | |
| static ssize_t | |
| dcssblk_save_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct dcssblk_dev_info *dev_info; | |
| dev_info = container_of(dev, struct dcssblk_dev_info, dev); | |
| return sprintf(buf, dev_info->save_pending ? "1\n" : "0\n"); | |
| } | |
| static ssize_t | |
| dcssblk_save_store(struct device *dev, struct device_attribute *attr, const char *inbuf, size_t count) | |
| { | |
| struct dcssblk_dev_info *dev_info; | |
| if ((count > 1) && (inbuf[1] != '\n') && (inbuf[1] != '\0')) { | |
| PRINT_WARN("Invalid value, must be 0 or 1\n"); | |
| return -EINVAL; | |
| } | |
| dev_info = container_of(dev, struct dcssblk_dev_info, dev); | |
| down_write(&dcssblk_devices_sem); | |
| if (inbuf[0] == '1') { | |
| if (atomic_read(&dev_info->use_count) == 0) { | |
| // device is idle => we save immediately | |
| PRINT_INFO("Saving segment %s\n", | |
| dev_info->segment_name); | |
| segment_save(dev_info->segment_name); | |
| } else { | |
| // device is busy => we save it when it becomes | |
| // idle in dcssblk_release | |
| PRINT_INFO("Segment %s is currently busy, it will " | |
| "be saved when it becomes idle...\n", | |
| dev_info->segment_name); | |
| dev_info->save_pending = 1; | |
| } | |
| } else if (inbuf[0] == '0') { | |
| if (dev_info->save_pending) { | |
| // device is busy & the user wants to undo his save | |
| // request | |
| dev_info->save_pending = 0; | |
| PRINT_INFO("Pending save for segment %s deactivated\n", | |
| dev_info->segment_name); | |
| } | |
| } else { | |
| up_write(&dcssblk_devices_sem); | |
| PRINT_WARN("Invalid value, must be 0 or 1\n"); | |
| return -EINVAL; | |
| } | |
| up_write(&dcssblk_devices_sem); | |
| return count; | |
| } | |
| /* | |
| * device attribute for adding devices | |
| */ | |
| static ssize_t | |
| dcssblk_add_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) | |
| { | |
| int rc, i; | |
| struct dcssblk_dev_info *dev_info; | |
| char *local_buf; | |
| unsigned long seg_byte_size; | |
| dev_info = NULL; | |
| if (dev != dcssblk_root_dev) { | |
| rc = -EINVAL; | |
| goto out_nobuf; | |
| } | |
| local_buf = kmalloc(count + 1, GFP_KERNEL); | |
| if (local_buf == NULL) { | |
| rc = -ENOMEM; | |
| goto out_nobuf; | |
| } | |
| /* | |
| * parse input | |
| */ | |
| for (i = 0; ((buf[i] != '\0') && (buf[i] != '\n') && i < count); i++) { | |
| local_buf[i] = toupper(buf[i]); | |
| } | |
| local_buf[i] = '\0'; | |
| if ((i == 0) || (i > 8)) { | |
| rc = -ENAMETOOLONG; | |
| goto out; | |
| } | |
| /* | |
| * already loaded? | |
| */ | |
| down_read(&dcssblk_devices_sem); | |
| dev_info = dcssblk_get_device_by_name(local_buf); | |
| up_read(&dcssblk_devices_sem); | |
| if (dev_info != NULL) { | |
| PRINT_WARN("Segment %s already loaded!\n", local_buf); | |
| rc = -EEXIST; | |
| goto out; | |
| } | |
| /* | |
| * get a struct dcssblk_dev_info | |
| */ | |
| dev_info = kzalloc(sizeof(struct dcssblk_dev_info), GFP_KERNEL); | |
| if (dev_info == NULL) { | |
| rc = -ENOMEM; | |
| goto out; | |
| } | |
| strcpy(dev_info->segment_name, local_buf); | |
| strlcpy(dev_info->dev.bus_id, local_buf, BUS_ID_SIZE); | |
| dev_info->dev.release = dcssblk_release_segment; | |
| INIT_LIST_HEAD(&dev_info->lh); | |
| dev_info->gd = alloc_disk(DCSSBLK_MINORS_PER_DISK); | |
| if (dev_info->gd == NULL) { | |
| rc = -ENOMEM; | |
| goto free_dev_info; | |
| } | |
| dev_info->gd->major = dcssblk_major; | |
| dev_info->gd->fops = &dcssblk_devops; | |
| dev_info->dcssblk_queue = blk_alloc_queue(GFP_KERNEL); | |
| dev_info->gd->queue = dev_info->dcssblk_queue; | |
| dev_info->gd->private_data = dev_info; | |
| dev_info->gd->driverfs_dev = &dev_info->dev; | |
| /* | |
| * load the segment | |
| */ | |
| rc = segment_load(local_buf, SEGMENT_SHARED, | |
| &dev_info->start, &dev_info->end); | |
| if (rc < 0) { | |
| dcssblk_segment_warn(rc, dev_info->segment_name); | |
| goto dealloc_gendisk; | |
| } | |
| seg_byte_size = (dev_info->end - dev_info->start + 1); | |
| set_capacity(dev_info->gd, seg_byte_size >> 9); // size in sectors | |
| PRINT_INFO("Loaded segment %s, size = %lu Byte, " | |
| "capacity = %lu (512 Byte) sectors\n", local_buf, | |
| seg_byte_size, seg_byte_size >> 9); | |
| dev_info->segment_type = rc; | |
| dev_info->save_pending = 0; | |
| dev_info->is_shared = 1; | |
| dev_info->dev.parent = dcssblk_root_dev; | |
| /* | |
| * get minor, add to list | |
| */ | |
| down_write(&dcssblk_devices_sem); | |
| rc = dcssblk_assign_free_minor(dev_info); | |
| if (rc) { | |
| up_write(&dcssblk_devices_sem); | |
| PRINT_ERR("No free minor number available! " | |
| "Unloading segment...\n"); | |
| goto unload_seg; | |
| } | |
| sprintf(dev_info->gd->disk_name, "dcssblk%d", | |
| dev_info->gd->first_minor); | |
| list_add_tail(&dev_info->lh, &dcssblk_devices); | |
| if (!try_module_get(THIS_MODULE)) { | |
| rc = -ENODEV; | |
| goto list_del; | |
| } | |
| /* | |
| * register the device | |
| */ | |
| rc = device_register(&dev_info->dev); | |
| if (rc) { | |
| PRINT_ERR("Segment %s could not be registered RC=%d\n", | |
| local_buf, rc); | |
| module_put(THIS_MODULE); | |
| goto list_del; | |
| } | |
| get_device(&dev_info->dev); | |
| rc = device_create_file(&dev_info->dev, &dev_attr_shared); | |
| if (rc) | |
| goto unregister_dev; | |
| rc = device_create_file(&dev_info->dev, &dev_attr_save); | |
| if (rc) | |
| goto unregister_dev; | |
| add_disk(dev_info->gd); | |
| blk_queue_make_request(dev_info->dcssblk_queue, dcssblk_make_request); | |
| blk_queue_hardsect_size(dev_info->dcssblk_queue, 4096); | |
| switch (dev_info->segment_type) { | |
| case SEG_TYPE_SR: | |
| case SEG_TYPE_ER: | |
| case SEG_TYPE_SC: | |
| set_disk_ro(dev_info->gd,1); | |
| break; | |
| default: | |
| set_disk_ro(dev_info->gd,0); | |
| break; | |
| } | |
| PRINT_DEBUG("Segment %s loaded successfully\n", local_buf); | |
| up_write(&dcssblk_devices_sem); | |
| rc = count; | |
| goto out; | |
| unregister_dev: | |
| PRINT_ERR("device_create_file() failed!\n"); | |
| list_del(&dev_info->lh); | |
| blk_cleanup_queue(dev_info->dcssblk_queue); | |
| dev_info->gd->queue = NULL; | |
| put_disk(dev_info->gd); | |
| device_unregister(&dev_info->dev); | |
| segment_unload(dev_info->segment_name); | |
| put_device(&dev_info->dev); | |
| up_write(&dcssblk_devices_sem); | |
| goto out; | |
| list_del: | |
| list_del(&dev_info->lh); | |
| up_write(&dcssblk_devices_sem); | |
| unload_seg: | |
| segment_unload(local_buf); | |
| dealloc_gendisk: | |
| blk_cleanup_queue(dev_info->dcssblk_queue); | |
| dev_info->gd->queue = NULL; | |
| put_disk(dev_info->gd); | |
| free_dev_info: | |
| kfree(dev_info); | |
| out: | |
| kfree(local_buf); | |
| out_nobuf: | |
| return rc; | |
| } | |
| /* | |
| * device attribute for removing devices | |
| */ | |
| static ssize_t | |
| dcssblk_remove_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) | |
| { | |
| struct dcssblk_dev_info *dev_info; | |
| int rc, i; | |
| char *local_buf; | |
| if (dev != dcssblk_root_dev) { | |
| return -EINVAL; | |
| } | |
| local_buf = kmalloc(count + 1, GFP_KERNEL); | |
| if (local_buf == NULL) { | |
| return -ENOMEM; | |
| } | |
| /* | |
| * parse input | |
| */ | |
| for (i = 0; ((*(buf+i)!='\0') && (*(buf+i)!='\n') && i < count); i++) { | |
| local_buf[i] = toupper(buf[i]); | |
| } | |
| local_buf[i] = '\0'; | |
| if ((i == 0) || (i > 8)) { | |
| rc = -ENAMETOOLONG; | |
| goto out_buf; | |
| } | |
| down_write(&dcssblk_devices_sem); | |
| dev_info = dcssblk_get_device_by_name(local_buf); | |
| if (dev_info == NULL) { | |
| up_write(&dcssblk_devices_sem); | |
| PRINT_WARN("Segment %s is not loaded!\n", local_buf); | |
| rc = -ENODEV; | |
| goto out_buf; | |
| } | |
| if (atomic_read(&dev_info->use_count) != 0) { | |
| up_write(&dcssblk_devices_sem); | |
| PRINT_WARN("Segment %s is in use!\n", local_buf); | |
| rc = -EBUSY; | |
| goto out_buf; | |
| } | |
| list_del(&dev_info->lh); | |
| del_gendisk(dev_info->gd); | |
| blk_cleanup_queue(dev_info->dcssblk_queue); | |
| dev_info->gd->queue = NULL; | |
| put_disk(dev_info->gd); | |
| device_unregister(&dev_info->dev); | |
| segment_unload(dev_info->segment_name); | |
| PRINT_DEBUG("Segment %s unloaded successfully\n", | |
| dev_info->segment_name); | |
| put_device(&dev_info->dev); | |
| up_write(&dcssblk_devices_sem); | |
| rc = count; | |
| out_buf: | |
| kfree(local_buf); | |
| return rc; | |
| } | |
| static int | |
| dcssblk_open(struct inode *inode, struct file *filp) | |
| { | |
| struct dcssblk_dev_info *dev_info; | |
| int rc; | |
| dev_info = inode->i_bdev->bd_disk->private_data; | |
| if (NULL == dev_info) { | |
| rc = -ENODEV; | |
| goto out; | |
| } | |
| atomic_inc(&dev_info->use_count); | |
| inode->i_bdev->bd_block_size = 4096; | |
| rc = 0; | |
| out: | |
| return rc; | |
| } | |
| static int | |
| dcssblk_release(struct inode *inode, struct file *filp) | |
| { | |
| struct dcssblk_dev_info *dev_info; | |
| int rc; | |
| dev_info = inode->i_bdev->bd_disk->private_data; | |
| if (NULL == dev_info) { | |
| rc = -ENODEV; | |
| goto out; | |
| } | |
| down_write(&dcssblk_devices_sem); | |
| if (atomic_dec_and_test(&dev_info->use_count) | |
| && (dev_info->save_pending)) { | |
| PRINT_INFO("Segment %s became idle and is being saved now\n", | |
| dev_info->segment_name); | |
| segment_save(dev_info->segment_name); | |
| dev_info->save_pending = 0; | |
| } | |
| up_write(&dcssblk_devices_sem); | |
| rc = 0; | |
| out: | |
| return rc; | |
| } | |
| static int | |
| dcssblk_make_request(request_queue_t *q, struct bio *bio) | |
| { | |
| struct dcssblk_dev_info *dev_info; | |
| struct bio_vec *bvec; | |
| unsigned long index; | |
| unsigned long page_addr; | |
| unsigned long source_addr; | |
| unsigned long bytes_done; | |
| int i; | |
| bytes_done = 0; | |
| dev_info = bio->bi_bdev->bd_disk->private_data; | |
| if (dev_info == NULL) | |
| goto fail; | |
| if ((bio->bi_sector & 7) != 0 || (bio->bi_size & 4095) != 0) | |
| /* Request is not page-aligned. */ | |
| goto fail; | |
| if (((bio->bi_size >> 9) + bio->bi_sector) | |
| > get_capacity(bio->bi_bdev->bd_disk)) { | |
| /* Request beyond end of DCSS segment. */ | |
| goto fail; | |
| } | |
| /* verify data transfer direction */ | |
| if (dev_info->is_shared) { | |
| switch (dev_info->segment_type) { | |
| case SEG_TYPE_SR: | |
| case SEG_TYPE_ER: | |
| case SEG_TYPE_SC: | |
| /* cannot write to these segments */ | |
| if (bio_data_dir(bio) == WRITE) { | |
| PRINT_WARN("rejecting write to ro segment %s\n", dev_info->dev.bus_id); | |
| goto fail; | |
| } | |
| } | |
| } | |
| index = (bio->bi_sector >> 3); | |
| bio_for_each_segment(bvec, bio, i) { | |
| page_addr = (unsigned long) | |
| page_address(bvec->bv_page) + bvec->bv_offset; | |
| source_addr = dev_info->start + (index<<12) + bytes_done; | |
| if (unlikely(page_addr & 4095) != 0 || (bvec->bv_len & 4095) != 0) | |
| // More paranoia. | |
| goto fail; | |
| if (bio_data_dir(bio) == READ) { | |
| memcpy((void*)page_addr, (void*)source_addr, | |
| bvec->bv_len); | |
| } else { | |
| memcpy((void*)source_addr, (void*)page_addr, | |
| bvec->bv_len); | |
| } | |
| bytes_done += bvec->bv_len; | |
| } | |
| bio_endio(bio, bytes_done, 0); | |
| return 0; | |
| fail: | |
| bio_io_error(bio, bio->bi_size); | |
| return 0; | |
| } | |
| static int | |
| dcssblk_direct_access (struct block_device *bdev, sector_t secnum, | |
| unsigned long *data) | |
| { | |
| struct dcssblk_dev_info *dev_info; | |
| unsigned long pgoff; | |
| dev_info = bdev->bd_disk->private_data; | |
| if (!dev_info) | |
| return -ENODEV; | |
| if (secnum % (PAGE_SIZE/512)) | |
| return -EINVAL; | |
| pgoff = secnum / (PAGE_SIZE / 512); | |
| if ((pgoff+1)*PAGE_SIZE-1 > dev_info->end - dev_info->start) | |
| return -ERANGE; | |
| *data = (unsigned long) (dev_info->start+pgoff*PAGE_SIZE); | |
| return 0; | |
| } | |
| static void | |
| dcssblk_check_params(void) | |
| { | |
| int rc, i, j, k; | |
| char buf[9]; | |
| struct dcssblk_dev_info *dev_info; | |
| for (i = 0; (i < DCSSBLK_PARM_LEN) && (dcssblk_segments[i] != '\0'); | |
| i++) { | |
| for (j = i; (dcssblk_segments[j] != ',') && | |
| (dcssblk_segments[j] != '\0') && | |
| (dcssblk_segments[j] != '(') && | |
| (j - i) < 8; j++) | |
| { | |
| buf[j-i] = dcssblk_segments[j]; | |
| } | |
| buf[j-i] = '\0'; | |
| rc = dcssblk_add_store(dcssblk_root_dev, NULL, buf, j-i); | |
| if ((rc >= 0) && (dcssblk_segments[j] == '(')) { | |
| for (k = 0; buf[k] != '\0'; k++) | |
| buf[k] = toupper(buf[k]); | |
| if (!strncmp(&dcssblk_segments[j], "(local)", 7)) { | |
| down_read(&dcssblk_devices_sem); | |
| dev_info = dcssblk_get_device_by_name(buf); | |
| up_read(&dcssblk_devices_sem); | |
| if (dev_info) | |
| dcssblk_shared_store(&dev_info->dev, | |
| NULL, "0\n", 2); | |
| } | |
| } | |
| while ((dcssblk_segments[j] != ',') && | |
| (dcssblk_segments[j] != '\0')) | |
| { | |
| j++; | |
| } | |
| if (dcssblk_segments[j] == '\0') | |
| break; | |
| i = j; | |
| } | |
| } | |
| /* | |
| * The init/exit functions. | |
| */ | |
| static void __exit | |
| dcssblk_exit(void) | |
| { | |
| int rc; | |
| PRINT_DEBUG("DCSSBLOCK EXIT...\n"); | |
| s390_root_dev_unregister(dcssblk_root_dev); | |
| rc = unregister_blkdev(dcssblk_major, DCSSBLK_NAME); | |
| if (rc) { | |
| PRINT_ERR("unregister_blkdev() failed!\n"); | |
| } | |
| PRINT_DEBUG("...finished!\n"); | |
| } | |
| static int __init | |
| dcssblk_init(void) | |
| { | |
| int rc; | |
| PRINT_DEBUG("DCSSBLOCK INIT...\n"); | |
| dcssblk_root_dev = s390_root_dev_register("dcssblk"); | |
| if (IS_ERR(dcssblk_root_dev)) { | |
| PRINT_ERR("device_register() failed!\n"); | |
| return PTR_ERR(dcssblk_root_dev); | |
| } | |
| rc = device_create_file(dcssblk_root_dev, &dev_attr_add); | |
| if (rc) { | |
| PRINT_ERR("device_create_file(add) failed!\n"); | |
| s390_root_dev_unregister(dcssblk_root_dev); | |
| return rc; | |
| } | |
| rc = device_create_file(dcssblk_root_dev, &dev_attr_remove); | |
| if (rc) { | |
| PRINT_ERR("device_create_file(remove) failed!\n"); | |
| s390_root_dev_unregister(dcssblk_root_dev); | |
| return rc; | |
| } | |
| rc = register_blkdev(0, DCSSBLK_NAME); | |
| if (rc < 0) { | |
| PRINT_ERR("Can't get dynamic major!\n"); | |
| s390_root_dev_unregister(dcssblk_root_dev); | |
| return rc; | |
| } | |
| dcssblk_major = rc; | |
| init_rwsem(&dcssblk_devices_sem); | |
| dcssblk_check_params(); | |
| PRINT_DEBUG("...finished!\n"); | |
| return 0; | |
| } | |
| module_init(dcssblk_init); | |
| module_exit(dcssblk_exit); | |
| module_param_string(segments, dcssblk_segments, DCSSBLK_PARM_LEN, 0444); | |
| MODULE_PARM_DESC(segments, "Name of DCSS segment(s) to be loaded, " | |
| "comma-separated list, each name max. 8 chars.\n" | |
| "Adding \"(local)\" to segment name equals echoing 0 to " | |
| "/sys/devices/dcssblk/<segment name>/shared after loading " | |
| "the segment - \n" | |
| "e.g. segments=\"mydcss1,mydcss2,mydcss3(local)\""); | |
| MODULE_LICENSE("GPL"); |