| /* | |
| * drivers/s390/cio/chsc.c | |
| * S/390 common I/O routines -- channel subsystem call | |
| * | |
| * Copyright (C) 1999-2002 IBM Deutschland Entwicklung GmbH, | |
| * IBM Corporation | |
| * Author(s): Ingo Adlung (adlung@de.ibm.com) | |
| * Cornelia Huck (cornelia.huck@de.ibm.com) | |
| * Arnd Bergmann (arndb@de.ibm.com) | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/init.h> | |
| #include <linux/device.h> | |
| #include <asm/cio.h> | |
| #include "css.h" | |
| #include "cio.h" | |
| #include "cio_debug.h" | |
| #include "ioasm.h" | |
| #include "chsc.h" | |
| static void *sei_page; | |
| static int new_channel_path(int chpid); | |
| static inline void | |
| set_chp_logically_online(int chp, int onoff) | |
| { | |
| css[0]->chps[chp]->state = onoff; | |
| } | |
| static int | |
| get_chp_status(int chp) | |
| { | |
| return (css[0]->chps[chp] ? css[0]->chps[chp]->state : -ENODEV); | |
| } | |
| void | |
| chsc_validate_chpids(struct subchannel *sch) | |
| { | |
| int mask, chp; | |
| for (chp = 0; chp <= 7; chp++) { | |
| mask = 0x80 >> chp; | |
| if (!get_chp_status(sch->schib.pmcw.chpid[chp])) | |
| /* disable using this path */ | |
| sch->opm &= ~mask; | |
| } | |
| } | |
| void | |
| chpid_is_actually_online(int chp) | |
| { | |
| int state; | |
| state = get_chp_status(chp); | |
| if (state < 0) { | |
| need_rescan = 1; | |
| queue_work(slow_path_wq, &slow_path_work); | |
| } else | |
| WARN_ON(!state); | |
| } | |
| /* FIXME: this is _always_ called for every subchannel. shouldn't we | |
| * process more than one at a time? */ | |
| static int | |
| chsc_get_sch_desc_irq(struct subchannel *sch, void *page) | |
| { | |
| int ccode, j; | |
| struct { | |
| struct chsc_header request; | |
| u16 reserved1a:10; | |
| u16 ssid:2; | |
| u16 reserved1b:4; | |
| u16 f_sch; /* first subchannel */ | |
| u16 reserved2; | |
| u16 l_sch; /* last subchannel */ | |
| u32 reserved3; | |
| struct chsc_header response; | |
| u32 reserved4; | |
| u8 sch_valid : 1; | |
| u8 dev_valid : 1; | |
| u8 st : 3; /* subchannel type */ | |
| u8 zeroes : 3; | |
| u8 unit_addr; /* unit address */ | |
| u16 devno; /* device number */ | |
| u8 path_mask; | |
| u8 fla_valid_mask; | |
| u16 sch; /* subchannel */ | |
| u8 chpid[8]; /* chpids 0-7 */ | |
| u16 fla[8]; /* full link addresses 0-7 */ | |
| } *ssd_area; | |
| ssd_area = page; | |
| ssd_area->request.length = 0x0010; | |
| ssd_area->request.code = 0x0004; | |
| ssd_area->ssid = sch->schid.ssid; | |
| ssd_area->f_sch = sch->schid.sch_no; | |
| ssd_area->l_sch = sch->schid.sch_no; | |
| ccode = chsc(ssd_area); | |
| if (ccode > 0) { | |
| pr_debug("chsc returned with ccode = %d\n", ccode); | |
| return (ccode == 3) ? -ENODEV : -EBUSY; | |
| } | |
| switch (ssd_area->response.code) { | |
| case 0x0001: /* everything ok */ | |
| break; | |
| case 0x0002: | |
| CIO_CRW_EVENT(2, "Invalid command!\n"); | |
| return -EINVAL; | |
| case 0x0003: | |
| CIO_CRW_EVENT(2, "Error in chsc request block!\n"); | |
| return -EINVAL; | |
| case 0x0004: | |
| CIO_CRW_EVENT(2, "Model does not provide ssd\n"); | |
| return -EOPNOTSUPP; | |
| default: | |
| CIO_CRW_EVENT(2, "Unknown CHSC response %d\n", | |
| ssd_area->response.code); | |
| return -EIO; | |
| } | |
| /* | |
| * ssd_area->st stores the type of the detected | |
| * subchannel, with the following definitions: | |
| * | |
| * 0: I/O subchannel: All fields have meaning | |
| * 1: CHSC subchannel: Only sch_val, st and sch | |
| * have meaning | |
| * 2: Message subchannel: All fields except unit_addr | |
| * have meaning | |
| * 3: ADM subchannel: Only sch_val, st and sch | |
| * have meaning | |
| * | |
| * Other types are currently undefined. | |
| */ | |
| if (ssd_area->st > 3) { /* uhm, that looks strange... */ | |
| CIO_CRW_EVENT(0, "Strange subchannel type %d" | |
| " for sch 0.%x.%04x\n", ssd_area->st, | |
| sch->schid.ssid, sch->schid.sch_no); | |
| /* | |
| * There may have been a new subchannel type defined in the | |
| * time since this code was written; since we don't know which | |
| * fields have meaning and what to do with it we just jump out | |
| */ | |
| return 0; | |
| } else { | |
| const char *type[4] = {"I/O", "chsc", "message", "ADM"}; | |
| CIO_CRW_EVENT(6, "ssd: sch 0.%x.%04x is %s subchannel\n", | |
| sch->schid.ssid, sch->schid.sch_no, | |
| type[ssd_area->st]); | |
| sch->ssd_info.valid = 1; | |
| sch->ssd_info.type = ssd_area->st; | |
| } | |
| if (ssd_area->st == 0 || ssd_area->st == 2) { | |
| for (j = 0; j < 8; j++) { | |
| if (!((0x80 >> j) & ssd_area->path_mask & | |
| ssd_area->fla_valid_mask)) | |
| continue; | |
| sch->ssd_info.chpid[j] = ssd_area->chpid[j]; | |
| sch->ssd_info.fla[j] = ssd_area->fla[j]; | |
| } | |
| } | |
| return 0; | |
| } | |
| int | |
| css_get_ssd_info(struct subchannel *sch) | |
| { | |
| int ret; | |
| void *page; | |
| page = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); | |
| if (!page) | |
| return -ENOMEM; | |
| spin_lock_irq(&sch->lock); | |
| ret = chsc_get_sch_desc_irq(sch, page); | |
| if (ret) { | |
| static int cio_chsc_err_msg; | |
| if (!cio_chsc_err_msg) { | |
| printk(KERN_ERR | |
| "chsc_get_sch_descriptions:" | |
| " Error %d while doing chsc; " | |
| "processing some machine checks may " | |
| "not work\n", ret); | |
| cio_chsc_err_msg = 1; | |
| } | |
| } | |
| spin_unlock_irq(&sch->lock); | |
| free_page((unsigned long)page); | |
| if (!ret) { | |
| int j, chpid, mask; | |
| /* Allocate channel path structures, if needed. */ | |
| for (j = 0; j < 8; j++) { | |
| mask = 0x80 >> j; | |
| chpid = sch->ssd_info.chpid[j]; | |
| if ((sch->schib.pmcw.pim & mask) && | |
| (get_chp_status(chpid) < 0)) | |
| new_channel_path(chpid); | |
| } | |
| } | |
| return ret; | |
| } | |
| static int | |
| s390_subchannel_remove_chpid(struct device *dev, void *data) | |
| { | |
| int j; | |
| int mask; | |
| struct subchannel *sch; | |
| struct channel_path *chpid; | |
| struct schib schib; | |
| sch = to_subchannel(dev); | |
| chpid = data; | |
| for (j = 0; j < 8; j++) { | |
| mask = 0x80 >> j; | |
| if ((sch->schib.pmcw.pim & mask) && | |
| (sch->schib.pmcw.chpid[j] == chpid->id)) | |
| break; | |
| } | |
| if (j >= 8) | |
| return 0; | |
| spin_lock_irq(&sch->lock); | |
| stsch(sch->schid, &schib); | |
| if (!schib.pmcw.dnv) | |
| goto out_unreg; | |
| memcpy(&sch->schib, &schib, sizeof(struct schib)); | |
| /* Check for single path devices. */ | |
| if (sch->schib.pmcw.pim == 0x80) | |
| goto out_unreg; | |
| if ((sch->schib.scsw.actl & SCSW_ACTL_DEVACT) && | |
| (sch->schib.scsw.actl & SCSW_ACTL_SCHACT) && | |
| (sch->schib.pmcw.lpum == mask)) { | |
| int cc; | |
| cc = cio_clear(sch); | |
| if (cc == -ENODEV) | |
| goto out_unreg; | |
| /* Call handler. */ | |
| if (sch->driver && sch->driver->termination) | |
| sch->driver->termination(&sch->dev); | |
| goto out_unlock; | |
| } | |
| /* trigger path verification. */ | |
| if (sch->driver && sch->driver->verify) | |
| sch->driver->verify(&sch->dev); | |
| else if (sch->lpm == mask) | |
| goto out_unreg; | |
| out_unlock: | |
| spin_unlock_irq(&sch->lock); | |
| return 0; | |
| out_unreg: | |
| spin_unlock_irq(&sch->lock); | |
| sch->lpm = 0; | |
| if (css_enqueue_subchannel_slow(sch->schid)) { | |
| css_clear_subchannel_slow_list(); | |
| need_rescan = 1; | |
| } | |
| return 0; | |
| } | |
| static inline void | |
| s390_set_chpid_offline( __u8 chpid) | |
| { | |
| char dbf_txt[15]; | |
| struct device *dev; | |
| sprintf(dbf_txt, "chpr%x", chpid); | |
| CIO_TRACE_EVENT(2, dbf_txt); | |
| if (get_chp_status(chpid) <= 0) | |
| return; | |
| dev = get_device(&css[0]->chps[chpid]->dev); | |
| bus_for_each_dev(&css_bus_type, NULL, to_channelpath(dev), | |
| s390_subchannel_remove_chpid); | |
| if (need_rescan || css_slow_subchannels_exist()) | |
| queue_work(slow_path_wq, &slow_path_work); | |
| put_device(dev); | |
| } | |
| struct res_acc_data { | |
| struct channel_path *chp; | |
| u32 fla_mask; | |
| u16 fla; | |
| }; | |
| static int | |
| s390_process_res_acc_sch(struct res_acc_data *res_data, struct subchannel *sch) | |
| { | |
| int found; | |
| int chp; | |
| int ccode; | |
| found = 0; | |
| for (chp = 0; chp <= 7; chp++) | |
| /* | |
| * check if chpid is in information updated by ssd | |
| */ | |
| if (sch->ssd_info.valid && | |
| sch->ssd_info.chpid[chp] == res_data->chp->id && | |
| (sch->ssd_info.fla[chp] & res_data->fla_mask) | |
| == res_data->fla) { | |
| found = 1; | |
| break; | |
| } | |
| if (found == 0) | |
| return 0; | |
| /* | |
| * Do a stsch to update our subchannel structure with the | |
| * new path information and eventually check for logically | |
| * offline chpids. | |
| */ | |
| ccode = stsch(sch->schid, &sch->schib); | |
| if (ccode > 0) | |
| return 0; | |
| return 0x80 >> chp; | |
| } | |
| static inline int | |
| s390_process_res_acc_new_sch(struct subchannel_id schid) | |
| { | |
| struct schib schib; | |
| int ret; | |
| /* | |
| * We don't know the device yet, but since a path | |
| * may be available now to the device we'll have | |
| * to do recognition again. | |
| * Since we don't have any idea about which chpid | |
| * that beast may be on we'll have to do a stsch | |
| * on all devices, grr... | |
| */ | |
| if (stsch_err(schid, &schib)) | |
| /* We're through */ | |
| return need_rescan ? -EAGAIN : -ENXIO; | |
| /* Put it on the slow path. */ | |
| ret = css_enqueue_subchannel_slow(schid); | |
| if (ret) { | |
| css_clear_subchannel_slow_list(); | |
| need_rescan = 1; | |
| return -EAGAIN; | |
| } | |
| return 0; | |
| } | |
| static int | |
| __s390_process_res_acc(struct subchannel_id schid, void *data) | |
| { | |
| int chp_mask, old_lpm; | |
| struct res_acc_data *res_data; | |
| struct subchannel *sch; | |
| res_data = data; | |
| sch = get_subchannel_by_schid(schid); | |
| if (!sch) | |
| /* Check if a subchannel is newly available. */ | |
| return s390_process_res_acc_new_sch(schid); | |
| spin_lock_irq(&sch->lock); | |
| chp_mask = s390_process_res_acc_sch(res_data, sch); | |
| if (chp_mask == 0) { | |
| spin_unlock_irq(&sch->lock); | |
| put_device(&sch->dev); | |
| return 0; | |
| } | |
| old_lpm = sch->lpm; | |
| sch->lpm = ((sch->schib.pmcw.pim & | |
| sch->schib.pmcw.pam & | |
| sch->schib.pmcw.pom) | |
| | chp_mask) & sch->opm; | |
| if (!old_lpm && sch->lpm) | |
| device_trigger_reprobe(sch); | |
| else if (sch->driver && sch->driver->verify) | |
| sch->driver->verify(&sch->dev); | |
| spin_unlock_irq(&sch->lock); | |
| put_device(&sch->dev); | |
| return 0; | |
| } | |
| static int | |
| s390_process_res_acc (struct res_acc_data *res_data) | |
| { | |
| int rc; | |
| char dbf_txt[15]; | |
| sprintf(dbf_txt, "accpr%x", res_data->chp->id); | |
| CIO_TRACE_EVENT( 2, dbf_txt); | |
| if (res_data->fla != 0) { | |
| sprintf(dbf_txt, "fla%x", res_data->fla); | |
| CIO_TRACE_EVENT( 2, dbf_txt); | |
| } | |
| /* | |
| * I/O resources may have become accessible. | |
| * Scan through all subchannels that may be concerned and | |
| * do a validation on those. | |
| * The more information we have (info), the less scanning | |
| * will we have to do. | |
| */ | |
| rc = for_each_subchannel(__s390_process_res_acc, res_data); | |
| if (css_slow_subchannels_exist()) | |
| rc = -EAGAIN; | |
| else if (rc != -EAGAIN) | |
| rc = 0; | |
| return rc; | |
| } | |
| static int | |
| __get_chpid_from_lir(void *data) | |
| { | |
| struct lir { | |
| u8 iq; | |
| u8 ic; | |
| u16 sci; | |
| /* incident-node descriptor */ | |
| u32 indesc[28]; | |
| /* attached-node descriptor */ | |
| u32 andesc[28]; | |
| /* incident-specific information */ | |
| u32 isinfo[28]; | |
| } *lir; | |
| lir = data; | |
| if (!(lir->iq&0x80)) | |
| /* NULL link incident record */ | |
| return -EINVAL; | |
| if (!(lir->indesc[0]&0xc0000000)) | |
| /* node descriptor not valid */ | |
| return -EINVAL; | |
| if (!(lir->indesc[0]&0x10000000)) | |
| /* don't handle device-type nodes - FIXME */ | |
| return -EINVAL; | |
| /* Byte 3 contains the chpid. Could also be CTCA, but we don't care */ | |
| return (u16) (lir->indesc[0]&0x000000ff); | |
| } | |
| int | |
| chsc_process_crw(void) | |
| { | |
| int chpid, ret; | |
| struct res_acc_data res_data; | |
| struct { | |
| struct chsc_header request; | |
| u32 reserved1; | |
| u32 reserved2; | |
| u32 reserved3; | |
| struct chsc_header response; | |
| u32 reserved4; | |
| u8 flags; | |
| u8 vf; /* validity flags */ | |
| u8 rs; /* reporting source */ | |
| u8 cc; /* content code */ | |
| u16 fla; /* full link address */ | |
| u16 rsid; /* reporting source id */ | |
| u32 reserved5; | |
| u32 reserved6; | |
| u32 ccdf[96]; /* content-code dependent field */ | |
| /* ccdf has to be big enough for a link-incident record */ | |
| } *sei_area; | |
| if (!sei_page) | |
| return 0; | |
| /* | |
| * build the chsc request block for store event information | |
| * and do the call | |
| * This function is only called by the machine check handler thread, | |
| * so we don't need locking for the sei_page. | |
| */ | |
| sei_area = sei_page; | |
| CIO_TRACE_EVENT( 2, "prcss"); | |
| ret = 0; | |
| do { | |
| int ccode, status; | |
| struct device *dev; | |
| memset(sei_area, 0, sizeof(*sei_area)); | |
| memset(&res_data, 0, sizeof(struct res_acc_data)); | |
| sei_area->request.length = 0x0010; | |
| sei_area->request.code = 0x000e; | |
| ccode = chsc(sei_area); | |
| if (ccode > 0) | |
| return 0; | |
| switch (sei_area->response.code) { | |
| /* for debug purposes, check for problems */ | |
| case 0x0001: | |
| CIO_CRW_EVENT(4, "chsc_process_crw: event information " | |
| "successfully stored\n"); | |
| break; /* everything ok */ | |
| case 0x0002: | |
| CIO_CRW_EVENT(2, | |
| "chsc_process_crw: invalid command!\n"); | |
| return 0; | |
| case 0x0003: | |
| CIO_CRW_EVENT(2, "chsc_process_crw: error in chsc " | |
| "request block!\n"); | |
| return 0; | |
| case 0x0005: | |
| CIO_CRW_EVENT(2, "chsc_process_crw: no event " | |
| "information stored\n"); | |
| return 0; | |
| default: | |
| CIO_CRW_EVENT(2, "chsc_process_crw: chsc response %d\n", | |
| sei_area->response.code); | |
| return 0; | |
| } | |
| /* Check if we might have lost some information. */ | |
| if (sei_area->flags & 0x40) | |
| CIO_CRW_EVENT(2, "chsc_process_crw: Event information " | |
| "has been lost due to overflow!\n"); | |
| if (sei_area->rs != 4) { | |
| CIO_CRW_EVENT(2, "chsc_process_crw: reporting source " | |
| "(%04X) isn't a chpid!\n", | |
| sei_area->rsid); | |
| continue; | |
| } | |
| /* which kind of information was stored? */ | |
| switch (sei_area->cc) { | |
| case 1: /* link incident*/ | |
| CIO_CRW_EVENT(4, "chsc_process_crw: " | |
| "channel subsystem reports link incident," | |
| " reporting source is chpid %x\n", | |
| sei_area->rsid); | |
| chpid = __get_chpid_from_lir(sei_area->ccdf); | |
| if (chpid < 0) | |
| CIO_CRW_EVENT(4, "%s: Invalid LIR, skipping\n", | |
| __FUNCTION__); | |
| else | |
| s390_set_chpid_offline(chpid); | |
| break; | |
| case 2: /* i/o resource accessibiliy */ | |
| CIO_CRW_EVENT(4, "chsc_process_crw: " | |
| "channel subsystem reports some I/O " | |
| "devices may have become accessible\n"); | |
| pr_debug("Data received after sei: \n"); | |
| pr_debug("Validity flags: %x\n", sei_area->vf); | |
| /* allocate a new channel path structure, if needed */ | |
| status = get_chp_status(sei_area->rsid); | |
| if (status < 0) | |
| new_channel_path(sei_area->rsid); | |
| else if (!status) | |
| break; | |
| dev = get_device(&css[0]->chps[sei_area->rsid]->dev); | |
| res_data.chp = to_channelpath(dev); | |
| pr_debug("chpid: %x", sei_area->rsid); | |
| if ((sei_area->vf & 0xc0) != 0) { | |
| res_data.fla = sei_area->fla; | |
| if ((sei_area->vf & 0xc0) == 0xc0) { | |
| pr_debug(" full link addr: %x", | |
| sei_area->fla); | |
| res_data.fla_mask = 0xffff; | |
| } else { | |
| pr_debug(" link addr: %x", | |
| sei_area->fla); | |
| res_data.fla_mask = 0xff00; | |
| } | |
| } | |
| ret = s390_process_res_acc(&res_data); | |
| pr_debug("\n\n"); | |
| put_device(dev); | |
| break; | |
| default: /* other stuff */ | |
| CIO_CRW_EVENT(4, "chsc_process_crw: event %d\n", | |
| sei_area->cc); | |
| break; | |
| } | |
| } while (sei_area->flags & 0x80); | |
| return ret; | |
| } | |
| static inline int | |
| __chp_add_new_sch(struct subchannel_id schid) | |
| { | |
| struct schib schib; | |
| int ret; | |
| if (stsch(schid, &schib)) | |
| /* We're through */ | |
| return need_rescan ? -EAGAIN : -ENXIO; | |
| /* Put it on the slow path. */ | |
| ret = css_enqueue_subchannel_slow(schid); | |
| if (ret) { | |
| css_clear_subchannel_slow_list(); | |
| need_rescan = 1; | |
| return -EAGAIN; | |
| } | |
| return 0; | |
| } | |
| static int | |
| __chp_add(struct subchannel_id schid, void *data) | |
| { | |
| int i, mask; | |
| struct channel_path *chp; | |
| struct subchannel *sch; | |
| chp = data; | |
| sch = get_subchannel_by_schid(schid); | |
| if (!sch) | |
| /* Check if the subchannel is now available. */ | |
| return __chp_add_new_sch(schid); | |
| spin_lock_irq(&sch->lock); | |
| for (i=0; i<8; i++) { | |
| mask = 0x80 >> i; | |
| if ((sch->schib.pmcw.pim & mask) && | |
| (sch->schib.pmcw.chpid[i] == chp->id)) { | |
| if (stsch(sch->schid, &sch->schib) != 0) { | |
| /* Endgame. */ | |
| spin_unlock_irq(&sch->lock); | |
| return -ENXIO; | |
| } | |
| break; | |
| } | |
| } | |
| if (i==8) { | |
| spin_unlock_irq(&sch->lock); | |
| return 0; | |
| } | |
| sch->lpm = ((sch->schib.pmcw.pim & | |
| sch->schib.pmcw.pam & | |
| sch->schib.pmcw.pom) | |
| | mask) & sch->opm; | |
| if (sch->driver && sch->driver->verify) | |
| sch->driver->verify(&sch->dev); | |
| spin_unlock_irq(&sch->lock); | |
| put_device(&sch->dev); | |
| return 0; | |
| } | |
| static int | |
| chp_add(int chpid) | |
| { | |
| int rc; | |
| char dbf_txt[15]; | |
| struct device *dev; | |
| if (!get_chp_status(chpid)) | |
| return 0; /* no need to do the rest */ | |
| sprintf(dbf_txt, "cadd%x", chpid); | |
| CIO_TRACE_EVENT(2, dbf_txt); | |
| dev = get_device(&css[0]->chps[chpid]->dev); | |
| rc = for_each_subchannel(__chp_add, to_channelpath(dev)); | |
| if (css_slow_subchannels_exist()) | |
| rc = -EAGAIN; | |
| if (rc != -EAGAIN) | |
| rc = 0; | |
| put_device(dev); | |
| return rc; | |
| } | |
| /* | |
| * Handling of crw machine checks with channel path source. | |
| */ | |
| int | |
| chp_process_crw(int chpid, int on) | |
| { | |
| if (on == 0) { | |
| /* Path has gone. We use the link incident routine.*/ | |
| s390_set_chpid_offline(chpid); | |
| return 0; /* De-register is async anyway. */ | |
| } | |
| /* | |
| * Path has come. Allocate a new channel path structure, | |
| * if needed. | |
| */ | |
| if (get_chp_status(chpid) < 0) | |
| new_channel_path(chpid); | |
| /* Avoid the extra overhead in process_rec_acc. */ | |
| return chp_add(chpid); | |
| } | |
| static inline int check_for_io_on_path(struct subchannel *sch, int index) | |
| { | |
| int cc; | |
| if (!device_is_online(sch)) | |
| /* cio could be doing I/O. */ | |
| return 0; | |
| cc = stsch(sch->schid, &sch->schib); | |
| if (cc) | |
| return 0; | |
| if (sch->schib.scsw.actl && sch->schib.pmcw.lpum == (0x80 >> index)) | |
| return 1; | |
| return 0; | |
| } | |
| static inline void | |
| __s390_subchannel_vary_chpid(struct subchannel *sch, __u8 chpid, int on) | |
| { | |
| int chp, old_lpm; | |
| unsigned long flags; | |
| if (!sch->ssd_info.valid) | |
| return; | |
| spin_lock_irqsave(&sch->lock, flags); | |
| old_lpm = sch->lpm; | |
| for (chp = 0; chp < 8; chp++) { | |
| if (sch->ssd_info.chpid[chp] != chpid) | |
| continue; | |
| if (on) { | |
| sch->opm |= (0x80 >> chp); | |
| sch->lpm |= (0x80 >> chp); | |
| if (!old_lpm) | |
| device_trigger_reprobe(sch); | |
| else if (sch->driver && sch->driver->verify) | |
| sch->driver->verify(&sch->dev); | |
| } else { | |
| sch->opm &= ~(0x80 >> chp); | |
| sch->lpm &= ~(0x80 >> chp); | |
| if (check_for_io_on_path(sch, chp)) | |
| /* Path verification is done after killing. */ | |
| device_kill_io(sch); | |
| else if (!sch->lpm) { | |
| if (css_enqueue_subchannel_slow(sch->schid)) { | |
| css_clear_subchannel_slow_list(); | |
| need_rescan = 1; | |
| } | |
| } else if (sch->driver && sch->driver->verify) | |
| sch->driver->verify(&sch->dev); | |
| } | |
| break; | |
| } | |
| spin_unlock_irqrestore(&sch->lock, flags); | |
| } | |
| static int | |
| s390_subchannel_vary_chpid_off(struct device *dev, void *data) | |
| { | |
| struct subchannel *sch; | |
| __u8 *chpid; | |
| sch = to_subchannel(dev); | |
| chpid = data; | |
| __s390_subchannel_vary_chpid(sch, *chpid, 0); | |
| return 0; | |
| } | |
| static int | |
| s390_subchannel_vary_chpid_on(struct device *dev, void *data) | |
| { | |
| struct subchannel *sch; | |
| __u8 *chpid; | |
| sch = to_subchannel(dev); | |
| chpid = data; | |
| __s390_subchannel_vary_chpid(sch, *chpid, 1); | |
| return 0; | |
| } | |
| static int | |
| __s390_vary_chpid_on(struct subchannel_id schid, void *data) | |
| { | |
| struct schib schib; | |
| struct subchannel *sch; | |
| sch = get_subchannel_by_schid(schid); | |
| if (sch) { | |
| put_device(&sch->dev); | |
| return 0; | |
| } | |
| if (stsch_err(schid, &schib)) | |
| /* We're through */ | |
| return -ENXIO; | |
| /* Put it on the slow path. */ | |
| if (css_enqueue_subchannel_slow(schid)) { | |
| css_clear_subchannel_slow_list(); | |
| need_rescan = 1; | |
| return -EAGAIN; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Function: s390_vary_chpid | |
| * Varies the specified chpid online or offline | |
| */ | |
| static int | |
| s390_vary_chpid( __u8 chpid, int on) | |
| { | |
| char dbf_text[15]; | |
| int status; | |
| sprintf(dbf_text, on?"varyon%x":"varyoff%x", chpid); | |
| CIO_TRACE_EVENT( 2, dbf_text); | |
| status = get_chp_status(chpid); | |
| if (status < 0) { | |
| printk(KERN_ERR "Can't vary unknown chpid %02X\n", chpid); | |
| return -EINVAL; | |
| } | |
| if (!on && !status) { | |
| printk(KERN_ERR "chpid %x is already offline\n", chpid); | |
| return -EINVAL; | |
| } | |
| set_chp_logically_online(chpid, on); | |
| /* | |
| * Redo PathVerification on the devices the chpid connects to | |
| */ | |
| bus_for_each_dev(&css_bus_type, NULL, &chpid, on ? | |
| s390_subchannel_vary_chpid_on : | |
| s390_subchannel_vary_chpid_off); | |
| if (on) | |
| /* Scan for new devices on varied on path. */ | |
| for_each_subchannel(__s390_vary_chpid_on, NULL); | |
| if (need_rescan || css_slow_subchannels_exist()) | |
| queue_work(slow_path_wq, &slow_path_work); | |
| return 0; | |
| } | |
| /* | |
| * Channel measurement related functions | |
| */ | |
| static ssize_t | |
| chp_measurement_chars_read(struct kobject *kobj, char *buf, loff_t off, | |
| size_t count) | |
| { | |
| struct channel_path *chp; | |
| unsigned int size; | |
| chp = to_channelpath(container_of(kobj, struct device, kobj)); | |
| if (!chp->cmg_chars) | |
| return 0; | |
| size = sizeof(struct cmg_chars); | |
| if (off > size) | |
| return 0; | |
| if (off + count > size) | |
| count = size - off; | |
| memcpy(buf, chp->cmg_chars + off, count); | |
| return count; | |
| } | |
| static struct bin_attribute chp_measurement_chars_attr = { | |
| .attr = { | |
| .name = "measurement_chars", | |
| .mode = S_IRUSR, | |
| .owner = THIS_MODULE, | |
| }, | |
| .size = sizeof(struct cmg_chars), | |
| .read = chp_measurement_chars_read, | |
| }; | |
| static void | |
| chp_measurement_copy_block(struct cmg_entry *buf, | |
| struct channel_subsystem *css, int chpid) | |
| { | |
| void *area; | |
| struct cmg_entry *entry, reference_buf; | |
| int idx; | |
| if (chpid < 128) { | |
| area = css->cub_addr1; | |
| idx = chpid; | |
| } else { | |
| area = css->cub_addr2; | |
| idx = chpid - 128; | |
| } | |
| entry = area + (idx * sizeof(struct cmg_entry)); | |
| do { | |
| memcpy(buf, entry, sizeof(*entry)); | |
| memcpy(&reference_buf, entry, sizeof(*entry)); | |
| } while (reference_buf.values[0] != buf->values[0]); | |
| } | |
| static ssize_t | |
| chp_measurement_read(struct kobject *kobj, char *buf, loff_t off, size_t count) | |
| { | |
| struct channel_path *chp; | |
| struct channel_subsystem *css; | |
| unsigned int size; | |
| chp = to_channelpath(container_of(kobj, struct device, kobj)); | |
| css = to_css(chp->dev.parent); | |
| size = sizeof(struct cmg_entry); | |
| /* Only allow single reads. */ | |
| if (off || count < size) | |
| return 0; | |
| chp_measurement_copy_block((struct cmg_entry *)buf, css, chp->id); | |
| count = size; | |
| return count; | |
| } | |
| static struct bin_attribute chp_measurement_attr = { | |
| .attr = { | |
| .name = "measurement", | |
| .mode = S_IRUSR, | |
| .owner = THIS_MODULE, | |
| }, | |
| .size = sizeof(struct cmg_entry), | |
| .read = chp_measurement_read, | |
| }; | |
| static void | |
| chsc_remove_chp_cmg_attr(struct channel_path *chp) | |
| { | |
| sysfs_remove_bin_file(&chp->dev.kobj, &chp_measurement_chars_attr); | |
| sysfs_remove_bin_file(&chp->dev.kobj, &chp_measurement_attr); | |
| } | |
| static int | |
| chsc_add_chp_cmg_attr(struct channel_path *chp) | |
| { | |
| int ret; | |
| ret = sysfs_create_bin_file(&chp->dev.kobj, | |
| &chp_measurement_chars_attr); | |
| if (ret) | |
| return ret; | |
| ret = sysfs_create_bin_file(&chp->dev.kobj, &chp_measurement_attr); | |
| if (ret) | |
| sysfs_remove_bin_file(&chp->dev.kobj, | |
| &chp_measurement_chars_attr); | |
| return ret; | |
| } | |
| static void | |
| chsc_remove_cmg_attr(struct channel_subsystem *css) | |
| { | |
| int i; | |
| for (i = 0; i <= __MAX_CHPID; i++) { | |
| if (!css->chps[i]) | |
| continue; | |
| chsc_remove_chp_cmg_attr(css->chps[i]); | |
| } | |
| } | |
| static int | |
| chsc_add_cmg_attr(struct channel_subsystem *css) | |
| { | |
| int i, ret; | |
| ret = 0; | |
| for (i = 0; i <= __MAX_CHPID; i++) { | |
| if (!css->chps[i]) | |
| continue; | |
| ret = chsc_add_chp_cmg_attr(css->chps[i]); | |
| if (ret) | |
| goto cleanup; | |
| } | |
| return ret; | |
| cleanup: | |
| for (--i; i >= 0; i--) { | |
| if (!css->chps[i]) | |
| continue; | |
| chsc_remove_chp_cmg_attr(css->chps[i]); | |
| } | |
| return ret; | |
| } | |
| static int | |
| __chsc_do_secm(struct channel_subsystem *css, int enable, void *page) | |
| { | |
| struct { | |
| struct chsc_header request; | |
| u32 operation_code : 2; | |
| u32 : 30; | |
| u32 key : 4; | |
| u32 : 28; | |
| u32 zeroes1; | |
| u32 cub_addr1; | |
| u32 zeroes2; | |
| u32 cub_addr2; | |
| u32 reserved[13]; | |
| struct chsc_header response; | |
| u32 status : 8; | |
| u32 : 4; | |
| u32 fmt : 4; | |
| u32 : 16; | |
| } *secm_area; | |
| int ret, ccode; | |
| secm_area = page; | |
| secm_area->request.length = 0x0050; | |
| secm_area->request.code = 0x0016; | |
| secm_area->key = PAGE_DEFAULT_KEY; | |
| secm_area->cub_addr1 = (u64)(unsigned long)css->cub_addr1; | |
| secm_area->cub_addr2 = (u64)(unsigned long)css->cub_addr2; | |
| secm_area->operation_code = enable ? 0 : 1; | |
| ccode = chsc(secm_area); | |
| if (ccode > 0) | |
| return (ccode == 3) ? -ENODEV : -EBUSY; | |
| switch (secm_area->response.code) { | |
| case 0x0001: /* Success. */ | |
| ret = 0; | |
| break; | |
| case 0x0003: /* Invalid block. */ | |
| case 0x0007: /* Invalid format. */ | |
| case 0x0008: /* Other invalid block. */ | |
| CIO_CRW_EVENT(2, "Error in chsc request block!\n"); | |
| ret = -EINVAL; | |
| break; | |
| case 0x0004: /* Command not provided in model. */ | |
| CIO_CRW_EVENT(2, "Model does not provide secm\n"); | |
| ret = -EOPNOTSUPP; | |
| break; | |
| case 0x0102: /* cub adresses incorrect */ | |
| CIO_CRW_EVENT(2, "Invalid addresses in chsc request block\n"); | |
| ret = -EINVAL; | |
| break; | |
| case 0x0103: /* key error */ | |
| CIO_CRW_EVENT(2, "Access key error in secm\n"); | |
| ret = -EINVAL; | |
| break; | |
| case 0x0105: /* error while starting */ | |
| CIO_CRW_EVENT(2, "Error while starting channel measurement\n"); | |
| ret = -EIO; | |
| break; | |
| default: | |
| CIO_CRW_EVENT(2, "Unknown CHSC response %d\n", | |
| secm_area->response.code); | |
| ret = -EIO; | |
| } | |
| return ret; | |
| } | |
| int | |
| chsc_secm(struct channel_subsystem *css, int enable) | |
| { | |
| void *secm_area; | |
| int ret; | |
| secm_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); | |
| if (!secm_area) | |
| return -ENOMEM; | |
| mutex_lock(&css->mutex); | |
| if (enable && !css->cm_enabled) { | |
| css->cub_addr1 = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); | |
| css->cub_addr2 = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); | |
| if (!css->cub_addr1 || !css->cub_addr2) { | |
| free_page((unsigned long)css->cub_addr1); | |
| free_page((unsigned long)css->cub_addr2); | |
| free_page((unsigned long)secm_area); | |
| mutex_unlock(&css->mutex); | |
| return -ENOMEM; | |
| } | |
| } | |
| ret = __chsc_do_secm(css, enable, secm_area); | |
| if (!ret) { | |
| css->cm_enabled = enable; | |
| if (css->cm_enabled) { | |
| ret = chsc_add_cmg_attr(css); | |
| if (ret) { | |
| memset(secm_area, 0, PAGE_SIZE); | |
| __chsc_do_secm(css, 0, secm_area); | |
| css->cm_enabled = 0; | |
| } | |
| } else | |
| chsc_remove_cmg_attr(css); | |
| } | |
| if (enable && !css->cm_enabled) { | |
| free_page((unsigned long)css->cub_addr1); | |
| free_page((unsigned long)css->cub_addr2); | |
| } | |
| mutex_unlock(&css->mutex); | |
| free_page((unsigned long)secm_area); | |
| return ret; | |
| } | |
| /* | |
| * Files for the channel path entries. | |
| */ | |
| static ssize_t | |
| chp_status_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct channel_path *chp = container_of(dev, struct channel_path, dev); | |
| if (!chp) | |
| return 0; | |
| return (get_chp_status(chp->id) ? sprintf(buf, "online\n") : | |
| sprintf(buf, "offline\n")); | |
| } | |
| static ssize_t | |
| chp_status_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) | |
| { | |
| struct channel_path *cp = container_of(dev, struct channel_path, dev); | |
| char cmd[10]; | |
| int num_args; | |
| int error; | |
| num_args = sscanf(buf, "%5s", cmd); | |
| if (!num_args) | |
| return count; | |
| if (!strnicmp(cmd, "on", 2)) | |
| error = s390_vary_chpid(cp->id, 1); | |
| else if (!strnicmp(cmd, "off", 3)) | |
| error = s390_vary_chpid(cp->id, 0); | |
| else | |
| error = -EINVAL; | |
| return error < 0 ? error : count; | |
| } | |
| static DEVICE_ATTR(status, 0644, chp_status_show, chp_status_write); | |
| static ssize_t | |
| chp_type_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct channel_path *chp = container_of(dev, struct channel_path, dev); | |
| if (!chp) | |
| return 0; | |
| return sprintf(buf, "%x\n", chp->desc.desc); | |
| } | |
| static DEVICE_ATTR(type, 0444, chp_type_show, NULL); | |
| static ssize_t | |
| chp_cmg_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct channel_path *chp = to_channelpath(dev); | |
| if (!chp) | |
| return 0; | |
| if (chp->cmg == -1) /* channel measurements not available */ | |
| return sprintf(buf, "unknown\n"); | |
| return sprintf(buf, "%x\n", chp->cmg); | |
| } | |
| static DEVICE_ATTR(cmg, 0444, chp_cmg_show, NULL); | |
| static ssize_t | |
| chp_shared_show(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct channel_path *chp = to_channelpath(dev); | |
| if (!chp) | |
| return 0; | |
| if (chp->shared == -1) /* channel measurements not available */ | |
| return sprintf(buf, "unknown\n"); | |
| return sprintf(buf, "%x\n", chp->shared); | |
| } | |
| static DEVICE_ATTR(shared, 0444, chp_shared_show, NULL); | |
| static struct attribute * chp_attrs[] = { | |
| &dev_attr_status.attr, | |
| &dev_attr_type.attr, | |
| &dev_attr_cmg.attr, | |
| &dev_attr_shared.attr, | |
| NULL, | |
| }; | |
| static struct attribute_group chp_attr_group = { | |
| .attrs = chp_attrs, | |
| }; | |
| static void | |
| chp_release(struct device *dev) | |
| { | |
| struct channel_path *cp; | |
| cp = container_of(dev, struct channel_path, dev); | |
| kfree(cp); | |
| } | |
| static int | |
| chsc_determine_channel_path_description(int chpid, | |
| struct channel_path_desc *desc) | |
| { | |
| int ccode, ret; | |
| struct { | |
| struct chsc_header request; | |
| u32 : 24; | |
| u32 first_chpid : 8; | |
| u32 : 24; | |
| u32 last_chpid : 8; | |
| u32 zeroes1; | |
| struct chsc_header response; | |
| u32 zeroes2; | |
| struct channel_path_desc desc; | |
| } *scpd_area; | |
| scpd_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); | |
| if (!scpd_area) | |
| return -ENOMEM; | |
| scpd_area->request.length = 0x0010; | |
| scpd_area->request.code = 0x0002; | |
| scpd_area->first_chpid = chpid; | |
| scpd_area->last_chpid = chpid; | |
| ccode = chsc(scpd_area); | |
| if (ccode > 0) { | |
| ret = (ccode == 3) ? -ENODEV : -EBUSY; | |
| goto out; | |
| } | |
| switch (scpd_area->response.code) { | |
| case 0x0001: /* Success. */ | |
| memcpy(desc, &scpd_area->desc, | |
| sizeof(struct channel_path_desc)); | |
| ret = 0; | |
| break; | |
| case 0x0003: /* Invalid block. */ | |
| case 0x0007: /* Invalid format. */ | |
| case 0x0008: /* Other invalid block. */ | |
| CIO_CRW_EVENT(2, "Error in chsc request block!\n"); | |
| ret = -EINVAL; | |
| break; | |
| case 0x0004: /* Command not provided in model. */ | |
| CIO_CRW_EVENT(2, "Model does not provide scpd\n"); | |
| ret = -EOPNOTSUPP; | |
| break; | |
| default: | |
| CIO_CRW_EVENT(2, "Unknown CHSC response %d\n", | |
| scpd_area->response.code); | |
| ret = -EIO; | |
| } | |
| out: | |
| free_page((unsigned long)scpd_area); | |
| return ret; | |
| } | |
| static void | |
| chsc_initialize_cmg_chars(struct channel_path *chp, u8 cmcv, | |
| struct cmg_chars *chars) | |
| { | |
| switch (chp->cmg) { | |
| case 2: | |
| case 3: | |
| chp->cmg_chars = kmalloc(sizeof(struct cmg_chars), | |
| GFP_KERNEL); | |
| if (chp->cmg_chars) { | |
| int i, mask; | |
| struct cmg_chars *cmg_chars; | |
| cmg_chars = chp->cmg_chars; | |
| for (i = 0; i < NR_MEASUREMENT_CHARS; i++) { | |
| mask = 0x80 >> (i + 3); | |
| if (cmcv & mask) | |
| cmg_chars->values[i] = chars->values[i]; | |
| else | |
| cmg_chars->values[i] = 0; | |
| } | |
| } | |
| break; | |
| default: | |
| /* No cmg-dependent data. */ | |
| break; | |
| } | |
| } | |
| static int | |
| chsc_get_channel_measurement_chars(struct channel_path *chp) | |
| { | |
| int ccode, ret; | |
| struct { | |
| struct chsc_header request; | |
| u32 : 24; | |
| u32 first_chpid : 8; | |
| u32 : 24; | |
| u32 last_chpid : 8; | |
| u32 zeroes1; | |
| struct chsc_header response; | |
| u32 zeroes2; | |
| u32 not_valid : 1; | |
| u32 shared : 1; | |
| u32 : 22; | |
| u32 chpid : 8; | |
| u32 cmcv : 5; | |
| u32 : 11; | |
| u32 cmgq : 8; | |
| u32 cmg : 8; | |
| u32 zeroes3; | |
| u32 data[NR_MEASUREMENT_CHARS]; | |
| } *scmc_area; | |
| scmc_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); | |
| if (!scmc_area) | |
| return -ENOMEM; | |
| scmc_area->request.length = 0x0010; | |
| scmc_area->request.code = 0x0022; | |
| scmc_area->first_chpid = chp->id; | |
| scmc_area->last_chpid = chp->id; | |
| ccode = chsc(scmc_area); | |
| if (ccode > 0) { | |
| ret = (ccode == 3) ? -ENODEV : -EBUSY; | |
| goto out; | |
| } | |
| switch (scmc_area->response.code) { | |
| case 0x0001: /* Success. */ | |
| if (!scmc_area->not_valid) { | |
| chp->cmg = scmc_area->cmg; | |
| chp->shared = scmc_area->shared; | |
| chsc_initialize_cmg_chars(chp, scmc_area->cmcv, | |
| (struct cmg_chars *) | |
| &scmc_area->data); | |
| } else { | |
| chp->cmg = -1; | |
| chp->shared = -1; | |
| } | |
| ret = 0; | |
| break; | |
| case 0x0003: /* Invalid block. */ | |
| case 0x0007: /* Invalid format. */ | |
| case 0x0008: /* Invalid bit combination. */ | |
| CIO_CRW_EVENT(2, "Error in chsc request block!\n"); | |
| ret = -EINVAL; | |
| break; | |
| case 0x0004: /* Command not provided. */ | |
| CIO_CRW_EVENT(2, "Model does not provide scmc\n"); | |
| ret = -EOPNOTSUPP; | |
| break; | |
| default: | |
| CIO_CRW_EVENT(2, "Unknown CHSC response %d\n", | |
| scmc_area->response.code); | |
| ret = -EIO; | |
| } | |
| out: | |
| free_page((unsigned long)scmc_area); | |
| return ret; | |
| } | |
| /* | |
| * Entries for chpids on the system bus. | |
| * This replaces /proc/chpids. | |
| */ | |
| static int | |
| new_channel_path(int chpid) | |
| { | |
| struct channel_path *chp; | |
| int ret; | |
| chp = kzalloc(sizeof(struct channel_path), GFP_KERNEL); | |
| if (!chp) | |
| return -ENOMEM; | |
| /* fill in status, etc. */ | |
| chp->id = chpid; | |
| chp->state = 1; | |
| chp->dev.parent = &css[0]->device; | |
| chp->dev.release = chp_release; | |
| snprintf(chp->dev.bus_id, BUS_ID_SIZE, "chp0.%x", chpid); | |
| /* Obtain channel path description and fill it in. */ | |
| ret = chsc_determine_channel_path_description(chpid, &chp->desc); | |
| if (ret) | |
| goto out_free; | |
| /* Get channel-measurement characteristics. */ | |
| if (css_characteristics_avail && css_chsc_characteristics.scmc | |
| && css_chsc_characteristics.secm) { | |
| ret = chsc_get_channel_measurement_chars(chp); | |
| if (ret) | |
| goto out_free; | |
| } else { | |
| static int msg_done; | |
| if (!msg_done) { | |
| printk(KERN_WARNING "cio: Channel measurements not " | |
| "available, continuing.\n"); | |
| msg_done = 1; | |
| } | |
| chp->cmg = -1; | |
| } | |
| /* make it known to the system */ | |
| ret = device_register(&chp->dev); | |
| if (ret) { | |
| printk(KERN_WARNING "%s: could not register %02x\n", | |
| __func__, chpid); | |
| goto out_free; | |
| } | |
| ret = sysfs_create_group(&chp->dev.kobj, &chp_attr_group); | |
| if (ret) { | |
| device_unregister(&chp->dev); | |
| goto out_free; | |
| } | |
| mutex_lock(&css[0]->mutex); | |
| if (css[0]->cm_enabled) { | |
| ret = chsc_add_chp_cmg_attr(chp); | |
| if (ret) { | |
| sysfs_remove_group(&chp->dev.kobj, &chp_attr_group); | |
| device_unregister(&chp->dev); | |
| mutex_unlock(&css[0]->mutex); | |
| goto out_free; | |
| } | |
| } | |
| css[0]->chps[chpid] = chp; | |
| mutex_unlock(&css[0]->mutex); | |
| return ret; | |
| out_free: | |
| kfree(chp); | |
| return ret; | |
| } | |
| void * | |
| chsc_get_chp_desc(struct subchannel *sch, int chp_no) | |
| { | |
| struct channel_path *chp; | |
| struct channel_path_desc *desc; | |
| chp = css[0]->chps[sch->schib.pmcw.chpid[chp_no]]; | |
| if (!chp) | |
| return NULL; | |
| desc = kmalloc(sizeof(struct channel_path_desc), GFP_KERNEL); | |
| if (!desc) | |
| return NULL; | |
| memcpy(desc, &chp->desc, sizeof(struct channel_path_desc)); | |
| return desc; | |
| } | |
| static int reset_channel_path(struct channel_path *chp) | |
| { | |
| int cc; | |
| cc = rchp(chp->id); | |
| switch (cc) { | |
| case 0: | |
| return 0; | |
| case 2: | |
| return -EBUSY; | |
| default: | |
| return -ENODEV; | |
| } | |
| } | |
| static void reset_channel_paths_css(struct channel_subsystem *css) | |
| { | |
| int i; | |
| for (i = 0; i <= __MAX_CHPID; i++) { | |
| if (css->chps[i]) | |
| reset_channel_path(css->chps[i]); | |
| } | |
| } | |
| void cio_reset_channel_paths(void) | |
| { | |
| int i; | |
| for (i = 0; i <= __MAX_CSSID; i++) { | |
| if (css[i] && css[i]->valid) | |
| reset_channel_paths_css(css[i]); | |
| } | |
| } | |
| static int __init | |
| chsc_alloc_sei_area(void) | |
| { | |
| sei_page = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); | |
| if (!sei_page) | |
| printk(KERN_WARNING"Can't allocate page for processing of " \ | |
| "chsc machine checks!\n"); | |
| return (sei_page ? 0 : -ENOMEM); | |
| } | |
| int __init | |
| chsc_enable_facility(int operation_code) | |
| { | |
| int ret; | |
| struct { | |
| struct chsc_header request; | |
| u8 reserved1:4; | |
| u8 format:4; | |
| u8 reserved2; | |
| u16 operation_code; | |
| u32 reserved3; | |
| u32 reserved4; | |
| u32 operation_data_area[252]; | |
| struct chsc_header response; | |
| u32 reserved5:4; | |
| u32 format2:4; | |
| u32 reserved6:24; | |
| } *sda_area; | |
| sda_area = (void *)get_zeroed_page(GFP_KERNEL|GFP_DMA); | |
| if (!sda_area) | |
| return -ENOMEM; | |
| sda_area->request.length = 0x0400; | |
| sda_area->request.code = 0x0031; | |
| sda_area->operation_code = operation_code; | |
| ret = chsc(sda_area); | |
| if (ret > 0) { | |
| ret = (ret == 3) ? -ENODEV : -EBUSY; | |
| goto out; | |
| } | |
| switch (sda_area->response.code) { | |
| case 0x0001: /* everything ok */ | |
| ret = 0; | |
| break; | |
| case 0x0003: /* invalid request block */ | |
| case 0x0007: | |
| ret = -EINVAL; | |
| break; | |
| case 0x0004: /* command not provided */ | |
| case 0x0101: /* facility not provided */ | |
| ret = -EOPNOTSUPP; | |
| break; | |
| default: /* something went wrong */ | |
| ret = -EIO; | |
| } | |
| out: | |
| free_page((unsigned long)sda_area); | |
| return ret; | |
| } | |
| subsys_initcall(chsc_alloc_sei_area); | |
| struct css_general_char css_general_characteristics; | |
| struct css_chsc_char css_chsc_characteristics; | |
| int __init | |
| chsc_determine_css_characteristics(void) | |
| { | |
| int result; | |
| struct { | |
| struct chsc_header request; | |
| u32 reserved1; | |
| u32 reserved2; | |
| u32 reserved3; | |
| struct chsc_header response; | |
| u32 reserved4; | |
| u32 general_char[510]; | |
| u32 chsc_char[518]; | |
| } *scsc_area; | |
| scsc_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); | |
| if (!scsc_area) { | |
| printk(KERN_WARNING"cio: Was not able to determine available" \ | |
| "CHSCs due to no memory.\n"); | |
| return -ENOMEM; | |
| } | |
| scsc_area->request.length = 0x0010; | |
| scsc_area->request.code = 0x0010; | |
| result = chsc(scsc_area); | |
| if (result) { | |
| printk(KERN_WARNING"cio: Was not able to determine " \ | |
| "available CHSCs, cc=%i.\n", result); | |
| result = -EIO; | |
| goto exit; | |
| } | |
| if (scsc_area->response.code != 1) { | |
| printk(KERN_WARNING"cio: Was not able to determine " \ | |
| "available CHSCs.\n"); | |
| result = -EIO; | |
| goto exit; | |
| } | |
| memcpy(&css_general_characteristics, scsc_area->general_char, | |
| sizeof(css_general_characteristics)); | |
| memcpy(&css_chsc_characteristics, scsc_area->chsc_char, | |
| sizeof(css_chsc_characteristics)); | |
| exit: | |
| free_page ((unsigned long) scsc_area); | |
| return result; | |
| } | |
| EXPORT_SYMBOL_GPL(css_general_characteristics); | |
| EXPORT_SYMBOL_GPL(css_chsc_characteristics); |