| /* | |
| * drivers/s390/s390mach.c | |
| * S/390 machine check handler | |
| * | |
| * S390 version | |
| * Copyright (C) 2000 IBM Deutschland Entwicklung GmbH, IBM Corporation | |
| * Author(s): Ingo Adlung (adlung@de.ibm.com) | |
| * Martin Schwidefsky (schwidefsky@de.ibm.com) | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/sched.h> | |
| #include <linux/errno.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/time.h> | |
| #include <linux/kthread.h> | |
| #include <asm/lowcore.h> | |
| #include "s390mach.h" | |
| static struct semaphore m_sem; | |
| extern int css_process_crw(int, int); | |
| extern int chsc_process_crw(void); | |
| extern int chp_process_crw(int, int); | |
| extern void css_reiterate_subchannels(void); | |
| extern struct workqueue_struct *slow_path_wq; | |
| extern struct work_struct slow_path_work; | |
| static NORET_TYPE void | |
| s390_handle_damage(char *msg) | |
| { | |
| #ifdef CONFIG_SMP | |
| smp_send_stop(); | |
| #endif | |
| disabled_wait((unsigned long) __builtin_return_address(0)); | |
| for(;;); | |
| } | |
| /* | |
| * Retrieve CRWs and call function to handle event. | |
| * | |
| * Note : we currently process CRWs for io and chsc subchannels only | |
| */ | |
| static int | |
| s390_collect_crw_info(void *param) | |
| { | |
| struct crw crw[2]; | |
| int ccode, ret, slow; | |
| struct semaphore *sem; | |
| unsigned int chain; | |
| sem = (struct semaphore *)param; | |
| repeat: | |
| down_interruptible(sem); | |
| slow = 0; | |
| chain = 0; | |
| while (1) { | |
| if (unlikely(chain > 1)) { | |
| struct crw tmp_crw; | |
| printk(KERN_WARNING"%s: Code does not support more " | |
| "than two chained crws; please report to " | |
| "linux390@de.ibm.com!\n", __FUNCTION__); | |
| ccode = stcrw(&tmp_crw); | |
| printk(KERN_WARNING"%s: crw reports slct=%d, oflw=%d, " | |
| "chn=%d, rsc=%X, anc=%d, erc=%X, rsid=%X\n", | |
| __FUNCTION__, tmp_crw.slct, tmp_crw.oflw, | |
| tmp_crw.chn, tmp_crw.rsc, tmp_crw.anc, | |
| tmp_crw.erc, tmp_crw.rsid); | |
| printk(KERN_WARNING"%s: This was crw number %x in the " | |
| "chain\n", __FUNCTION__, chain); | |
| if (ccode != 0) | |
| break; | |
| chain = tmp_crw.chn ? chain + 1 : 0; | |
| continue; | |
| } | |
| ccode = stcrw(&crw[chain]); | |
| if (ccode != 0) | |
| break; | |
| printk(KERN_DEBUG "crw_info : CRW reports slct=%d, oflw=%d, " | |
| "chn=%d, rsc=%X, anc=%d, erc=%X, rsid=%X\n", | |
| crw[chain].slct, crw[chain].oflw, crw[chain].chn, | |
| crw[chain].rsc, crw[chain].anc, crw[chain].erc, | |
| crw[chain].rsid); | |
| /* Check for overflows. */ | |
| if (crw[chain].oflw) { | |
| pr_debug("%s: crw overflow detected!\n", __FUNCTION__); | |
| css_reiterate_subchannels(); | |
| chain = 0; | |
| slow = 1; | |
| continue; | |
| } | |
| switch (crw[chain].rsc) { | |
| case CRW_RSC_SCH: | |
| if (crw[0].chn && !chain) | |
| break; | |
| pr_debug("source is subchannel %04X\n", crw[0].rsid); | |
| ret = css_process_crw (crw[0].rsid, | |
| chain ? crw[1].rsid : 0); | |
| if (ret == -EAGAIN) | |
| slow = 1; | |
| break; | |
| case CRW_RSC_MONITOR: | |
| pr_debug("source is monitoring facility\n"); | |
| break; | |
| case CRW_RSC_CPATH: | |
| pr_debug("source is channel path %02X\n", crw[0].rsid); | |
| /* | |
| * Check for solicited machine checks. These are | |
| * created by reset channel path and need not be | |
| * reported to the common I/O layer. | |
| */ | |
| if (crw[chain].slct) { | |
| pr_debug("solicited machine check for " | |
| "channel path %02X\n", crw[0].rsid); | |
| break; | |
| } | |
| switch (crw[0].erc) { | |
| case CRW_ERC_IPARM: /* Path has come. */ | |
| ret = chp_process_crw(crw[0].rsid, 1); | |
| break; | |
| case CRW_ERC_PERRI: /* Path has gone. */ | |
| case CRW_ERC_PERRN: | |
| ret = chp_process_crw(crw[0].rsid, 0); | |
| break; | |
| default: | |
| pr_debug("Don't know how to handle erc=%x\n", | |
| crw[0].erc); | |
| ret = 0; | |
| } | |
| if (ret == -EAGAIN) | |
| slow = 1; | |
| break; | |
| case CRW_RSC_CONFIG: | |
| pr_debug("source is configuration-alert facility\n"); | |
| break; | |
| case CRW_RSC_CSS: | |
| pr_debug("source is channel subsystem\n"); | |
| ret = chsc_process_crw(); | |
| if (ret == -EAGAIN) | |
| slow = 1; | |
| break; | |
| default: | |
| pr_debug("unknown source\n"); | |
| break; | |
| } | |
| /* chain is always 0 or 1 here. */ | |
| chain = crw[chain].chn ? chain + 1 : 0; | |
| } | |
| if (slow) | |
| queue_work(slow_path_wq, &slow_path_work); | |
| goto repeat; | |
| return 0; | |
| } | |
| struct mcck_struct { | |
| int kill_task; | |
| int channel_report; | |
| int warning; | |
| unsigned long long mcck_code; | |
| }; | |
| static DEFINE_PER_CPU(struct mcck_struct, cpu_mcck); | |
| /* | |
| * Main machine check handler function. Will be called with interrupts enabled | |
| * or disabled and machine checks enabled or disabled. | |
| */ | |
| void | |
| s390_handle_mcck(void) | |
| { | |
| unsigned long flags; | |
| struct mcck_struct mcck; | |
| /* | |
| * Disable machine checks and get the current state of accumulated | |
| * machine checks. Afterwards delete the old state and enable machine | |
| * checks again. | |
| */ | |
| local_irq_save(flags); | |
| local_mcck_disable(); | |
| mcck = __get_cpu_var(cpu_mcck); | |
| memset(&__get_cpu_var(cpu_mcck), 0, sizeof(struct mcck_struct)); | |
| clear_thread_flag(TIF_MCCK_PENDING); | |
| local_mcck_enable(); | |
| local_irq_restore(flags); | |
| if (mcck.channel_report) | |
| up(&m_sem); | |
| #ifdef CONFIG_MACHCHK_WARNING | |
| /* | |
| * The warning may remain for a prolonged period on the bare iron. | |
| * (actually till the machine is powered off, or until the problem is gone) | |
| * So we just stop listening for the WARNING MCH and prevent continuously | |
| * being interrupted. One caveat is however, that we must do this per | |
| * processor and cannot use the smp version of ctl_clear_bit(). | |
| * On VM we only get one interrupt per virtally presented machinecheck. | |
| * Though one suffices, we may get one interrupt per (virtual) processor. | |
| */ | |
| if (mcck.warning) { /* WARNING pending ? */ | |
| static int mchchk_wng_posted = 0; | |
| /* | |
| * Use single machine clear, as we cannot handle smp right now | |
| */ | |
| __ctl_clear_bit(14, 24); /* Disable WARNING MCH */ | |
| if (xchg(&mchchk_wng_posted, 1) == 0) | |
| kill_cad_pid(SIGPWR, 1); | |
| } | |
| #endif | |
| if (mcck.kill_task) { | |
| local_irq_enable(); | |
| printk(KERN_EMERG "mcck: Terminating task because of machine " | |
| "malfunction (code 0x%016llx).\n", mcck.mcck_code); | |
| printk(KERN_EMERG "mcck: task: %s, pid: %d.\n", | |
| current->comm, current->pid); | |
| do_exit(SIGSEGV); | |
| } | |
| } | |
| /* | |
| * returns 0 if all registers could be validated | |
| * returns 1 otherwise | |
| */ | |
| static int | |
| s390_revalidate_registers(struct mci *mci) | |
| { | |
| int kill_task; | |
| u64 tmpclock; | |
| u64 zero; | |
| void *fpt_save_area, *fpt_creg_save_area; | |
| kill_task = 0; | |
| zero = 0; | |
| /* General purpose registers */ | |
| if (!mci->gr) | |
| /* | |
| * General purpose registers couldn't be restored and have | |
| * unknown contents. Process needs to be terminated. | |
| */ | |
| kill_task = 1; | |
| /* Revalidate floating point registers */ | |
| if (!mci->fp) | |
| /* | |
| * Floating point registers can't be restored and | |
| * therefore the process needs to be terminated. | |
| */ | |
| kill_task = 1; | |
| #ifndef CONFIG_64BIT | |
| asm volatile( | |
| " ld 0,0(%0)\n" | |
| " ld 2,8(%0)\n" | |
| " ld 4,16(%0)\n" | |
| " ld 6,24(%0)" | |
| : : "a" (&S390_lowcore.floating_pt_save_area)); | |
| #endif | |
| if (MACHINE_HAS_IEEE) { | |
| #ifdef CONFIG_64BIT | |
| fpt_save_area = &S390_lowcore.floating_pt_save_area; | |
| fpt_creg_save_area = &S390_lowcore.fpt_creg_save_area; | |
| #else | |
| fpt_save_area = (void *) S390_lowcore.extended_save_area_addr; | |
| fpt_creg_save_area = fpt_save_area+128; | |
| #endif | |
| /* Floating point control register */ | |
| if (!mci->fc) { | |
| /* | |
| * Floating point control register can't be restored. | |
| * Task will be terminated. | |
| */ | |
| asm volatile("lfpc 0(%0)" : : "a" (&zero), "m" (zero)); | |
| kill_task = 1; | |
| } else | |
| asm volatile("lfpc 0(%0)" : : "a" (fpt_creg_save_area)); | |
| asm volatile( | |
| " ld 0,0(%0)\n" | |
| " ld 1,8(%0)\n" | |
| " ld 2,16(%0)\n" | |
| " ld 3,24(%0)\n" | |
| " ld 4,32(%0)\n" | |
| " ld 5,40(%0)\n" | |
| " ld 6,48(%0)\n" | |
| " ld 7,56(%0)\n" | |
| " ld 8,64(%0)\n" | |
| " ld 9,72(%0)\n" | |
| " ld 10,80(%0)\n" | |
| " ld 11,88(%0)\n" | |
| " ld 12,96(%0)\n" | |
| " ld 13,104(%0)\n" | |
| " ld 14,112(%0)\n" | |
| " ld 15,120(%0)\n" | |
| : : "a" (fpt_save_area)); | |
| } | |
| /* Revalidate access registers */ | |
| asm volatile( | |
| " lam 0,15,0(%0)" | |
| : : "a" (&S390_lowcore.access_regs_save_area)); | |
| if (!mci->ar) | |
| /* | |
| * Access registers have unknown contents. | |
| * Terminating task. | |
| */ | |
| kill_task = 1; | |
| /* Revalidate control registers */ | |
| if (!mci->cr) | |
| /* | |
| * Control registers have unknown contents. | |
| * Can't recover and therefore stopping machine. | |
| */ | |
| s390_handle_damage("invalid control registers."); | |
| else | |
| #ifdef CONFIG_64BIT | |
| asm volatile( | |
| " lctlg 0,15,0(%0)" | |
| : : "a" (&S390_lowcore.cregs_save_area)); | |
| #else | |
| asm volatile( | |
| " lctl 0,15,0(%0)" | |
| : : "a" (&S390_lowcore.cregs_save_area)); | |
| #endif | |
| /* | |
| * We don't even try to revalidate the TOD register, since we simply | |
| * can't write something sensible into that register. | |
| */ | |
| #ifdef CONFIG_64BIT | |
| /* | |
| * See if we can revalidate the TOD programmable register with its | |
| * old contents (should be zero) otherwise set it to zero. | |
| */ | |
| if (!mci->pr) | |
| asm volatile( | |
| " sr 0,0\n" | |
| " sckpf" | |
| : : : "0", "cc"); | |
| else | |
| asm volatile( | |
| " l 0,0(%0)\n" | |
| " sckpf" | |
| : : "a" (&S390_lowcore.tod_progreg_save_area) | |
| : "0", "cc"); | |
| #endif | |
| /* Revalidate clock comparator register */ | |
| asm volatile( | |
| " stck 0(%1)\n" | |
| " sckc 0(%1)" | |
| : "=m" (tmpclock) : "a" (&(tmpclock)) : "cc", "memory"); | |
| /* Check if old PSW is valid */ | |
| if (!mci->wp) | |
| /* | |
| * Can't tell if we come from user or kernel mode | |
| * -> stopping machine. | |
| */ | |
| s390_handle_damage("old psw invalid."); | |
| if (!mci->ms || !mci->pm || !mci->ia) | |
| kill_task = 1; | |
| return kill_task; | |
| } | |
| #define MAX_IPD_COUNT 29 | |
| #define MAX_IPD_TIME (5 * 60 * USEC_PER_SEC) /* 5 minutes */ | |
| /* | |
| * machine check handler. | |
| */ | |
| void | |
| s390_do_machine_check(struct pt_regs *regs) | |
| { | |
| static DEFINE_SPINLOCK(ipd_lock); | |
| static unsigned long long last_ipd; | |
| static int ipd_count; | |
| unsigned long long tmp; | |
| struct mci *mci; | |
| struct mcck_struct *mcck; | |
| int umode; | |
| lockdep_off(); | |
| mci = (struct mci *) &S390_lowcore.mcck_interruption_code; | |
| mcck = &__get_cpu_var(cpu_mcck); | |
| umode = user_mode(regs); | |
| if (mci->sd) | |
| /* System damage -> stopping machine */ | |
| s390_handle_damage("received system damage machine check."); | |
| if (mci->pd) { | |
| if (mci->b) { | |
| /* Processing backup -> verify if we can survive this */ | |
| u64 z_mcic, o_mcic, t_mcic; | |
| #ifdef CONFIG_64BIT | |
| z_mcic = (1ULL<<63 | 1ULL<<59 | 1ULL<<29); | |
| o_mcic = (1ULL<<43 | 1ULL<<42 | 1ULL<<41 | 1ULL<<40 | | |
| 1ULL<<36 | 1ULL<<35 | 1ULL<<34 | 1ULL<<32 | | |
| 1ULL<<30 | 1ULL<<21 | 1ULL<<20 | 1ULL<<17 | | |
| 1ULL<<16); | |
| #else | |
| z_mcic = (1ULL<<63 | 1ULL<<59 | 1ULL<<57 | 1ULL<<50 | | |
| 1ULL<<29); | |
| o_mcic = (1ULL<<43 | 1ULL<<42 | 1ULL<<41 | 1ULL<<40 | | |
| 1ULL<<36 | 1ULL<<35 | 1ULL<<34 | 1ULL<<32 | | |
| 1ULL<<30 | 1ULL<<20 | 1ULL<<17 | 1ULL<<16); | |
| #endif | |
| t_mcic = *(u64 *)mci; | |
| if (((t_mcic & z_mcic) != 0) || | |
| ((t_mcic & o_mcic) != o_mcic)) { | |
| s390_handle_damage("processing backup machine " | |
| "check with damage."); | |
| } | |
| /* | |
| * Nullifying exigent condition, therefore we might | |
| * retry this instruction. | |
| */ | |
| spin_lock(&ipd_lock); | |
| tmp = get_clock(); | |
| if (((tmp - last_ipd) >> 12) < MAX_IPD_TIME) | |
| ipd_count++; | |
| else | |
| ipd_count = 1; | |
| last_ipd = tmp; | |
| if (ipd_count == MAX_IPD_COUNT) | |
| s390_handle_damage("too many ipd retries."); | |
| spin_unlock(&ipd_lock); | |
| } | |
| else { | |
| /* Processing damage -> stopping machine */ | |
| s390_handle_damage("received instruction processing " | |
| "damage machine check."); | |
| } | |
| } | |
| if (s390_revalidate_registers(mci)) { | |
| if (umode) { | |
| /* | |
| * Couldn't restore all register contents while in | |
| * user mode -> mark task for termination. | |
| */ | |
| mcck->kill_task = 1; | |
| mcck->mcck_code = *(unsigned long long *) mci; | |
| set_thread_flag(TIF_MCCK_PENDING); | |
| } | |
| else | |
| /* | |
| * Couldn't restore all register contents while in | |
| * kernel mode -> stopping machine. | |
| */ | |
| s390_handle_damage("unable to revalidate registers."); | |
| } | |
| if (mci->se) | |
| /* Storage error uncorrected */ | |
| s390_handle_damage("received storage error uncorrected " | |
| "machine check."); | |
| if (mci->ke) | |
| /* Storage key-error uncorrected */ | |
| s390_handle_damage("received storage key-error uncorrected " | |
| "machine check."); | |
| if (mci->ds && mci->fa) | |
| /* Storage degradation */ | |
| s390_handle_damage("received storage degradation machine " | |
| "check."); | |
| if (mci->cp) { | |
| /* Channel report word pending */ | |
| mcck->channel_report = 1; | |
| set_thread_flag(TIF_MCCK_PENDING); | |
| } | |
| if (mci->w) { | |
| /* Warning pending */ | |
| mcck->warning = 1; | |
| set_thread_flag(TIF_MCCK_PENDING); | |
| } | |
| lockdep_on(); | |
| } | |
| /* | |
| * s390_init_machine_check | |
| * | |
| * initialize machine check handling | |
| */ | |
| static int | |
| machine_check_init(void) | |
| { | |
| init_MUTEX_LOCKED(&m_sem); | |
| ctl_clear_bit(14, 25); /* disable external damage MCH */ | |
| ctl_set_bit(14, 27); /* enable system recovery MCH */ | |
| #ifdef CONFIG_MACHCHK_WARNING | |
| ctl_set_bit(14, 24); /* enable warning MCH */ | |
| #endif | |
| return 0; | |
| } | |
| /* | |
| * Initialize the machine check handler really early to be able to | |
| * catch all machine checks that happen during boot | |
| */ | |
| arch_initcall(machine_check_init); | |
| /* | |
| * Machine checks for the channel subsystem must be enabled | |
| * after the channel subsystem is initialized | |
| */ | |
| static int __init | |
| machine_check_crw_init (void) | |
| { | |
| kthread_run(s390_collect_crw_info, &m_sem, "kmcheck"); | |
| ctl_set_bit(14, 28); /* enable channel report MCH */ | |
| return 0; | |
| } | |
| device_initcall (machine_check_crw_init); |