| /* $Id: bbc_i2c.c,v 1.2 2001/04/02 09:59:08 davem Exp $ | |
| * bbc_i2c.c: I2C low-level driver for BBC device on UltraSPARC-III | |
| * platforms. | |
| * | |
| * Copyright (C) 2001 David S. Miller (davem@redhat.com) | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/types.h> | |
| #include <linux/slab.h> | |
| #include <linux/sched.h> | |
| #include <linux/wait.h> | |
| #include <linux/delay.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <asm/oplib.h> | |
| #include <asm/ebus.h> | |
| #include <asm/spitfire.h> | |
| #include <asm/bbc.h> | |
| #include "bbc_i2c.h" | |
| /* Convert this driver to use i2c bus layer someday... */ | |
| #define I2C_PCF_PIN 0x80 | |
| #define I2C_PCF_ESO 0x40 | |
| #define I2C_PCF_ES1 0x20 | |
| #define I2C_PCF_ES2 0x10 | |
| #define I2C_PCF_ENI 0x08 | |
| #define I2C_PCF_STA 0x04 | |
| #define I2C_PCF_STO 0x02 | |
| #define I2C_PCF_ACK 0x01 | |
| #define I2C_PCF_START (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_ENI | I2C_PCF_STA | I2C_PCF_ACK) | |
| #define I2C_PCF_STOP (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_STO | I2C_PCF_ACK) | |
| #define I2C_PCF_REPSTART ( I2C_PCF_ESO | I2C_PCF_STA | I2C_PCF_ACK) | |
| #define I2C_PCF_IDLE (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_ACK) | |
| #define I2C_PCF_INI 0x40 /* 1 if not initialized */ | |
| #define I2C_PCF_STS 0x20 | |
| #define I2C_PCF_BER 0x10 | |
| #define I2C_PCF_AD0 0x08 | |
| #define I2C_PCF_LRB 0x08 | |
| #define I2C_PCF_AAS 0x04 | |
| #define I2C_PCF_LAB 0x02 | |
| #define I2C_PCF_BB 0x01 | |
| /* The BBC devices have two I2C controllers. The first I2C controller | |
| * connects mainly to configuration proms (NVRAM, cpu configuration, | |
| * dimm types, etc.). Whereas the second I2C controller connects to | |
| * environmental control devices such as fans and temperature sensors. | |
| * The second controller also connects to the smartcard reader, if present. | |
| */ | |
| #define NUM_CHILDREN 8 | |
| struct bbc_i2c_bus { | |
| struct bbc_i2c_bus *next; | |
| int index; | |
| spinlock_t lock; | |
| void __iomem *i2c_bussel_reg; | |
| void __iomem *i2c_control_regs; | |
| unsigned char own, clock; | |
| wait_queue_head_t wq; | |
| volatile int waiting; | |
| struct linux_ebus_device *bus_edev; | |
| struct { | |
| struct linux_ebus_child *device; | |
| int client_claimed; | |
| } devs[NUM_CHILDREN]; | |
| }; | |
| static struct bbc_i2c_bus *all_bbc_i2c; | |
| struct bbc_i2c_client { | |
| struct bbc_i2c_bus *bp; | |
| struct linux_ebus_child *echild; | |
| int bus; | |
| int address; | |
| }; | |
| static int find_device(struct bbc_i2c_bus *bp, struct linux_ebus_child *echild) | |
| { | |
| int i; | |
| for (i = 0; i < NUM_CHILDREN; i++) { | |
| if (bp->devs[i].device == echild) { | |
| if (bp->devs[i].client_claimed) | |
| return 0; | |
| return 1; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void set_device_claimage(struct bbc_i2c_bus *bp, struct linux_ebus_child *echild, int val) | |
| { | |
| int i; | |
| for (i = 0; i < NUM_CHILDREN; i++) { | |
| if (bp->devs[i].device == echild) { | |
| bp->devs[i].client_claimed = val; | |
| return; | |
| } | |
| } | |
| } | |
| #define claim_device(BP,ECHILD) set_device_claimage(BP,ECHILD,1) | |
| #define release_device(BP,ECHILD) set_device_claimage(BP,ECHILD,0) | |
| static struct bbc_i2c_bus *find_bus_for_device(struct linux_ebus_child *echild) | |
| { | |
| struct bbc_i2c_bus *bp = all_bbc_i2c; | |
| while (bp != NULL) { | |
| if (find_device(bp, echild) != 0) | |
| break; | |
| bp = bp->next; | |
| } | |
| return bp; | |
| } | |
| struct linux_ebus_child *bbc_i2c_getdev(int index) | |
| { | |
| struct bbc_i2c_bus *bp = all_bbc_i2c; | |
| struct linux_ebus_child *echild = NULL; | |
| int curidx = 0; | |
| while (bp != NULL) { | |
| struct bbc_i2c_bus *next = bp->next; | |
| int i; | |
| for (i = 0; i < NUM_CHILDREN; i++) { | |
| if (!(echild = bp->devs[i].device)) | |
| break; | |
| if (curidx == index) | |
| goto out; | |
| echild = NULL; | |
| curidx++; | |
| } | |
| bp = next; | |
| } | |
| out: | |
| if (curidx == index) | |
| return echild; | |
| return NULL; | |
| } | |
| struct bbc_i2c_client *bbc_i2c_attach(struct linux_ebus_child *echild) | |
| { | |
| struct bbc_i2c_bus *bp = find_bus_for_device(echild); | |
| struct bbc_i2c_client *client; | |
| if (!bp) | |
| return NULL; | |
| client = kmalloc(sizeof(*client), GFP_KERNEL); | |
| if (!client) | |
| return NULL; | |
| memset(client, 0, sizeof(*client)); | |
| client->bp = bp; | |
| client->echild = echild; | |
| client->bus = echild->resource[0].start; | |
| client->address = echild->resource[1].start; | |
| claim_device(bp, echild); | |
| return client; | |
| } | |
| void bbc_i2c_detach(struct bbc_i2c_client *client) | |
| { | |
| struct bbc_i2c_bus *bp = client->bp; | |
| struct linux_ebus_child *echild = client->echild; | |
| release_device(bp, echild); | |
| kfree(client); | |
| } | |
| static int wait_for_pin(struct bbc_i2c_bus *bp, u8 *status) | |
| { | |
| DECLARE_WAITQUEUE(wait, current); | |
| int limit = 32; | |
| int ret = 1; | |
| bp->waiting = 1; | |
| add_wait_queue(&bp->wq, &wait); | |
| while (limit-- > 0) { | |
| u8 val; | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| *status = val = readb(bp->i2c_control_regs + 0); | |
| if ((val & I2C_PCF_PIN) == 0) { | |
| ret = 0; | |
| break; | |
| } | |
| msleep_interruptible(250); | |
| } | |
| remove_wait_queue(&bp->wq, &wait); | |
| bp->waiting = 0; | |
| current->state = TASK_RUNNING; | |
| return ret; | |
| } | |
| int bbc_i2c_writeb(struct bbc_i2c_client *client, unsigned char val, int off) | |
| { | |
| struct bbc_i2c_bus *bp = client->bp; | |
| int address = client->address; | |
| u8 status; | |
| int ret = -1; | |
| if (bp->i2c_bussel_reg != NULL) | |
| writeb(client->bus, bp->i2c_bussel_reg); | |
| writeb(address, bp->i2c_control_regs + 0x1); | |
| writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0); | |
| if (wait_for_pin(bp, &status)) | |
| goto out; | |
| writeb(off, bp->i2c_control_regs + 0x1); | |
| if (wait_for_pin(bp, &status) || | |
| (status & I2C_PCF_LRB) != 0) | |
| goto out; | |
| writeb(val, bp->i2c_control_regs + 0x1); | |
| if (wait_for_pin(bp, &status)) | |
| goto out; | |
| ret = 0; | |
| out: | |
| writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0); | |
| return ret; | |
| } | |
| int bbc_i2c_readb(struct bbc_i2c_client *client, unsigned char *byte, int off) | |
| { | |
| struct bbc_i2c_bus *bp = client->bp; | |
| unsigned char address = client->address, status; | |
| int ret = -1; | |
| if (bp->i2c_bussel_reg != NULL) | |
| writeb(client->bus, bp->i2c_bussel_reg); | |
| writeb(address, bp->i2c_control_regs + 0x1); | |
| writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0); | |
| if (wait_for_pin(bp, &status)) | |
| goto out; | |
| writeb(off, bp->i2c_control_regs + 0x1); | |
| if (wait_for_pin(bp, &status) || | |
| (status & I2C_PCF_LRB) != 0) | |
| goto out; | |
| writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0); | |
| address |= 0x1; /* READ */ | |
| writeb(address, bp->i2c_control_regs + 0x1); | |
| writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0); | |
| if (wait_for_pin(bp, &status)) | |
| goto out; | |
| /* Set PIN back to one so the device sends the first | |
| * byte. | |
| */ | |
| (void) readb(bp->i2c_control_regs + 0x1); | |
| if (wait_for_pin(bp, &status)) | |
| goto out; | |
| writeb(I2C_PCF_ESO | I2C_PCF_ENI, bp->i2c_control_regs + 0x0); | |
| *byte = readb(bp->i2c_control_regs + 0x1); | |
| if (wait_for_pin(bp, &status)) | |
| goto out; | |
| ret = 0; | |
| out: | |
| writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0); | |
| (void) readb(bp->i2c_control_regs + 0x1); | |
| return ret; | |
| } | |
| int bbc_i2c_write_buf(struct bbc_i2c_client *client, | |
| char *buf, int len, int off) | |
| { | |
| int ret = 0; | |
| while (len > 0) { | |
| int err = bbc_i2c_writeb(client, *buf, off); | |
| if (err < 0) { | |
| ret = err; | |
| break; | |
| } | |
| len--; | |
| buf++; | |
| off++; | |
| } | |
| return ret; | |
| } | |
| int bbc_i2c_read_buf(struct bbc_i2c_client *client, | |
| char *buf, int len, int off) | |
| { | |
| int ret = 0; | |
| while (len > 0) { | |
| int err = bbc_i2c_readb(client, buf, off); | |
| if (err < 0) { | |
| ret = err; | |
| break; | |
| } | |
| len--; | |
| buf++; | |
| off++; | |
| } | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(bbc_i2c_getdev); | |
| EXPORT_SYMBOL(bbc_i2c_attach); | |
| EXPORT_SYMBOL(bbc_i2c_detach); | |
| EXPORT_SYMBOL(bbc_i2c_writeb); | |
| EXPORT_SYMBOL(bbc_i2c_readb); | |
| EXPORT_SYMBOL(bbc_i2c_write_buf); | |
| EXPORT_SYMBOL(bbc_i2c_read_buf); | |
| static irqreturn_t bbc_i2c_interrupt(int irq, void *dev_id) | |
| { | |
| struct bbc_i2c_bus *bp = dev_id; | |
| /* PIN going from set to clear is the only event which | |
| * makes the i2c assert an interrupt. | |
| */ | |
| if (bp->waiting && | |
| !(readb(bp->i2c_control_regs + 0x0) & I2C_PCF_PIN)) | |
| wake_up(&bp->wq); | |
| return IRQ_HANDLED; | |
| } | |
| static void __init reset_one_i2c(struct bbc_i2c_bus *bp) | |
| { | |
| writeb(I2C_PCF_PIN, bp->i2c_control_regs + 0x0); | |
| writeb(bp->own, bp->i2c_control_regs + 0x1); | |
| writeb(I2C_PCF_PIN | I2C_PCF_ES1, bp->i2c_control_regs + 0x0); | |
| writeb(bp->clock, bp->i2c_control_regs + 0x1); | |
| writeb(I2C_PCF_IDLE, bp->i2c_control_regs + 0x0); | |
| } | |
| static int __init attach_one_i2c(struct linux_ebus_device *edev, int index) | |
| { | |
| struct bbc_i2c_bus *bp = kmalloc(sizeof(*bp), GFP_KERNEL); | |
| struct linux_ebus_child *echild; | |
| int entry; | |
| if (!bp) | |
| return -ENOMEM; | |
| memset(bp, 0, sizeof(*bp)); | |
| bp->i2c_control_regs = ioremap(edev->resource[0].start, 0x2); | |
| if (!bp->i2c_control_regs) | |
| goto fail; | |
| if (edev->num_addrs == 2) { | |
| bp->i2c_bussel_reg = ioremap(edev->resource[1].start, 0x1); | |
| if (!bp->i2c_bussel_reg) | |
| goto fail; | |
| } | |
| bp->waiting = 0; | |
| init_waitqueue_head(&bp->wq); | |
| if (request_irq(edev->irqs[0], bbc_i2c_interrupt, | |
| IRQF_SHARED, "bbc_i2c", bp)) | |
| goto fail; | |
| bp->index = index; | |
| bp->bus_edev = edev; | |
| spin_lock_init(&bp->lock); | |
| bp->next = all_bbc_i2c; | |
| all_bbc_i2c = bp; | |
| entry = 0; | |
| for (echild = edev->children; | |
| echild && entry < 8; | |
| echild = echild->next, entry++) { | |
| bp->devs[entry].device = echild; | |
| bp->devs[entry].client_claimed = 0; | |
| } | |
| writeb(I2C_PCF_PIN, bp->i2c_control_regs + 0x0); | |
| bp->own = readb(bp->i2c_control_regs + 0x01); | |
| writeb(I2C_PCF_PIN | I2C_PCF_ES1, bp->i2c_control_regs + 0x0); | |
| bp->clock = readb(bp->i2c_control_regs + 0x01); | |
| printk(KERN_INFO "i2c-%d: Regs at %p, %d devices, own %02x, clock %02x.\n", | |
| bp->index, bp->i2c_control_regs, entry, bp->own, bp->clock); | |
| reset_one_i2c(bp); | |
| return 0; | |
| fail: | |
| if (bp->i2c_bussel_reg) | |
| iounmap(bp->i2c_bussel_reg); | |
| if (bp->i2c_control_regs) | |
| iounmap(bp->i2c_control_regs); | |
| kfree(bp); | |
| return -EINVAL; | |
| } | |
| static int __init bbc_present(void) | |
| { | |
| struct linux_ebus *ebus = NULL; | |
| struct linux_ebus_device *edev = NULL; | |
| for_each_ebus(ebus) { | |
| for_each_ebusdev(edev, ebus) { | |
| if (!strcmp(edev->prom_node->name, "bbc")) | |
| return 1; | |
| } | |
| } | |
| return 0; | |
| } | |
| extern int bbc_envctrl_init(void); | |
| extern void bbc_envctrl_cleanup(void); | |
| static void bbc_i2c_cleanup(void); | |
| static int __init bbc_i2c_init(void) | |
| { | |
| struct linux_ebus *ebus = NULL; | |
| struct linux_ebus_device *edev = NULL; | |
| int err, index = 0; | |
| if ((tlb_type != cheetah && tlb_type != cheetah_plus) || | |
| !bbc_present()) | |
| return -ENODEV; | |
| for_each_ebus(ebus) { | |
| for_each_ebusdev(edev, ebus) { | |
| if (!strcmp(edev->prom_node->name, "i2c")) { | |
| if (!attach_one_i2c(edev, index)) | |
| index++; | |
| } | |
| } | |
| } | |
| if (!index) | |
| return -ENODEV; | |
| err = bbc_envctrl_init(); | |
| if (err) | |
| bbc_i2c_cleanup(); | |
| return err; | |
| } | |
| static void bbc_i2c_cleanup(void) | |
| { | |
| struct bbc_i2c_bus *bp = all_bbc_i2c; | |
| bbc_envctrl_cleanup(); | |
| while (bp != NULL) { | |
| struct bbc_i2c_bus *next = bp->next; | |
| free_irq(bp->bus_edev->irqs[0], bp); | |
| if (bp->i2c_bussel_reg) | |
| iounmap(bp->i2c_bussel_reg); | |
| if (bp->i2c_control_regs) | |
| iounmap(bp->i2c_control_regs); | |
| kfree(bp); | |
| bp = next; | |
| } | |
| all_bbc_i2c = NULL; | |
| } | |
| module_init(bbc_i2c_init); | |
| module_exit(bbc_i2c_cleanup); | |
| MODULE_LICENSE("GPL"); |