| #include <linux/types.h> | |
| #include <linux/mm.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/sched.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <asm/setup.h> | |
| #include <asm/page.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/amigaints.h> | |
| #include <asm/amigahw.h> | |
| #include <linux/zorro.h> | |
| #include <asm/irq.h> | |
| #include <linux/spinlock.h> | |
| #include "scsi.h" | |
| #include <scsi/scsi_host.h> | |
| #include "wd33c93.h" | |
| #include "a2091.h" | |
| #include<linux/stat.h> | |
| #define DMA(ptr) ((a2091_scsiregs *)((ptr)->base)) | |
| #define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) | |
| static irqreturn_t a2091_intr (int irq, void *_instance) | |
| { | |
| unsigned long flags; | |
| unsigned int status; | |
| struct Scsi_Host *instance = (struct Scsi_Host *)_instance; | |
| status = DMA(instance)->ISTR; | |
| if (!(status & (ISTR_INT_F|ISTR_INT_P)) || !(status & ISTR_INTS)) | |
| return IRQ_NONE; | |
| spin_lock_irqsave(instance->host_lock, flags); | |
| wd33c93_intr(instance); | |
| spin_unlock_irqrestore(instance->host_lock, flags); | |
| return IRQ_HANDLED; | |
| } | |
| static int dma_setup(struct scsi_cmnd *cmd, int dir_in) | |
| { | |
| unsigned short cntr = CNTR_PDMD | CNTR_INTEN; | |
| unsigned long addr = virt_to_bus(cmd->SCp.ptr); | |
| struct Scsi_Host *instance = cmd->device->host; | |
| /* don't allow DMA if the physical address is bad */ | |
| if (addr & A2091_XFER_MASK || | |
| (!dir_in && mm_end_of_chunk (addr, cmd->SCp.this_residual))) | |
| { | |
| HDATA(instance)->dma_bounce_len = (cmd->SCp.this_residual + 511) | |
| & ~0x1ff; | |
| HDATA(instance)->dma_bounce_buffer = | |
| kmalloc (HDATA(instance)->dma_bounce_len, GFP_KERNEL); | |
| /* can't allocate memory; use PIO */ | |
| if (!HDATA(instance)->dma_bounce_buffer) { | |
| HDATA(instance)->dma_bounce_len = 0; | |
| return 1; | |
| } | |
| /* get the physical address of the bounce buffer */ | |
| addr = virt_to_bus(HDATA(instance)->dma_bounce_buffer); | |
| /* the bounce buffer may not be in the first 16M of physmem */ | |
| if (addr & A2091_XFER_MASK) { | |
| /* we could use chipmem... maybe later */ | |
| kfree (HDATA(instance)->dma_bounce_buffer); | |
| HDATA(instance)->dma_bounce_buffer = NULL; | |
| HDATA(instance)->dma_bounce_len = 0; | |
| return 1; | |
| } | |
| if (!dir_in) { | |
| /* copy to bounce buffer for a write */ | |
| if (cmd->use_sg) | |
| #if 0 | |
| panic ("scsi%ddma: incomplete s/g support", | |
| instance->host_no); | |
| #else | |
| memcpy (HDATA(instance)->dma_bounce_buffer, | |
| cmd->SCp.ptr, cmd->SCp.this_residual); | |
| #endif | |
| else | |
| memcpy (HDATA(instance)->dma_bounce_buffer, | |
| cmd->request_buffer, cmd->request_bufflen); | |
| } | |
| } | |
| /* setup dma direction */ | |
| if (!dir_in) | |
| cntr |= CNTR_DDIR; | |
| /* remember direction */ | |
| HDATA(cmd->device->host)->dma_dir = dir_in; | |
| DMA(cmd->device->host)->CNTR = cntr; | |
| /* setup DMA *physical* address */ | |
| DMA(cmd->device->host)->ACR = addr; | |
| if (dir_in){ | |
| /* invalidate any cache */ | |
| cache_clear (addr, cmd->SCp.this_residual); | |
| }else{ | |
| /* push any dirty cache */ | |
| cache_push (addr, cmd->SCp.this_residual); | |
| } | |
| /* start DMA */ | |
| DMA(cmd->device->host)->ST_DMA = 1; | |
| /* return success */ | |
| return 0; | |
| } | |
| static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, | |
| int status) | |
| { | |
| /* disable SCSI interrupts */ | |
| unsigned short cntr = CNTR_PDMD; | |
| if (!HDATA(instance)->dma_dir) | |
| cntr |= CNTR_DDIR; | |
| /* disable SCSI interrupts */ | |
| DMA(instance)->CNTR = cntr; | |
| /* flush if we were reading */ | |
| if (HDATA(instance)->dma_dir) { | |
| DMA(instance)->FLUSH = 1; | |
| while (!(DMA(instance)->ISTR & ISTR_FE_FLG)) | |
| ; | |
| } | |
| /* clear a possible interrupt */ | |
| DMA(instance)->CINT = 1; | |
| /* stop DMA */ | |
| DMA(instance)->SP_DMA = 1; | |
| /* restore the CONTROL bits (minus the direction flag) */ | |
| DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; | |
| /* copy from a bounce buffer, if necessary */ | |
| if (status && HDATA(instance)->dma_bounce_buffer) { | |
| if (SCpnt && SCpnt->use_sg) { | |
| #if 0 | |
| panic ("scsi%d: incomplete s/g support", | |
| instance->host_no); | |
| #else | |
| if( HDATA(instance)->dma_dir ) | |
| memcpy (SCpnt->SCp.ptr, | |
| HDATA(instance)->dma_bounce_buffer, | |
| SCpnt->SCp.this_residual); | |
| kfree (HDATA(instance)->dma_bounce_buffer); | |
| HDATA(instance)->dma_bounce_buffer = NULL; | |
| HDATA(instance)->dma_bounce_len = 0; | |
| #endif | |
| } else { | |
| if (HDATA(instance)->dma_dir && SCpnt) | |
| memcpy (SCpnt->request_buffer, | |
| HDATA(instance)->dma_bounce_buffer, | |
| SCpnt->request_bufflen); | |
| kfree (HDATA(instance)->dma_bounce_buffer); | |
| HDATA(instance)->dma_bounce_buffer = NULL; | |
| HDATA(instance)->dma_bounce_len = 0; | |
| } | |
| } | |
| } | |
| int __init a2091_detect(struct scsi_host_template *tpnt) | |
| { | |
| static unsigned char called = 0; | |
| struct Scsi_Host *instance; | |
| unsigned long address; | |
| struct zorro_dev *z = NULL; | |
| wd33c93_regs regs; | |
| int num_a2091 = 0; | |
| if (!MACH_IS_AMIGA || called) | |
| return 0; | |
| called = 1; | |
| tpnt->proc_name = "A2091"; | |
| tpnt->proc_info = &wd33c93_proc_info; | |
| while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { | |
| if (z->id != ZORRO_PROD_CBM_A590_A2091_1 && | |
| z->id != ZORRO_PROD_CBM_A590_A2091_2) | |
| continue; | |
| address = z->resource.start; | |
| if (!request_mem_region(address, 256, "wd33c93")) | |
| continue; | |
| instance = scsi_register (tpnt, sizeof (struct WD33C93_hostdata)); | |
| if (instance == NULL) { | |
| release_mem_region(address, 256); | |
| continue; | |
| } | |
| instance->base = ZTWO_VADDR(address); | |
| instance->irq = IRQ_AMIGA_PORTS; | |
| instance->unique_id = z->slotaddr; | |
| DMA(instance)->DAWR = DAWR_A2091; | |
| regs.SASR = &(DMA(instance)->SASR); | |
| regs.SCMD = &(DMA(instance)->SCMD); | |
| wd33c93_init(instance, regs, dma_setup, dma_stop, WD33C93_FS_8_10); | |
| request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED, "A2091 SCSI", | |
| instance); | |
| DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; | |
| num_a2091++; | |
| } | |
| return num_a2091; | |
| } | |
| static int a2091_bus_reset(struct scsi_cmnd *cmd) | |
| { | |
| /* FIXME perform bus-specific reset */ | |
| /* FIXME 2: kill this function, and let midlayer fall back | |
| to the same action, calling wd33c93_host_reset() */ | |
| spin_lock_irq(cmd->device->host->host_lock); | |
| wd33c93_host_reset(cmd); | |
| spin_unlock_irq(cmd->device->host->host_lock); | |
| return SUCCESS; | |
| } | |
| #define HOSTS_C | |
| static struct scsi_host_template driver_template = { | |
| .proc_name = "A2901", | |
| .name = "Commodore A2091/A590 SCSI", | |
| .detect = a2091_detect, | |
| .release = a2091_release, | |
| .queuecommand = wd33c93_queuecommand, | |
| .eh_abort_handler = wd33c93_abort, | |
| .eh_bus_reset_handler = a2091_bus_reset, | |
| .eh_host_reset_handler = wd33c93_host_reset, | |
| .can_queue = CAN_QUEUE, | |
| .this_id = 7, | |
| .sg_tablesize = SG_ALL, | |
| .cmd_per_lun = CMD_PER_LUN, | |
| .use_clustering = DISABLE_CLUSTERING | |
| }; | |
| #include "scsi_module.c" | |
| int a2091_release(struct Scsi_Host *instance) | |
| { | |
| #ifdef MODULE | |
| DMA(instance)->CNTR = 0; | |
| release_mem_region(ZTWO_PADDR(instance->base), 256); | |
| free_irq(IRQ_AMIGA_PORTS, instance); | |
| wd33c93_release(); | |
| #endif | |
| return 1; | |
| } | |
| MODULE_LICENSE("GPL"); |