| /* | |
| * Adaptec AAC series RAID controller driver | |
| * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com> | |
| * | |
| * based on the old aacraid driver that is.. | |
| * Adaptec aacraid device driver for Linux. | |
| * | |
| * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com) | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2, or (at your option) | |
| * any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; see the file COPYING. If not, write to | |
| * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/types.h> | |
| #include <linux/sched.h> | |
| #include <linux/pci.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/slab.h> | |
| #include <linux/completion.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/dma-mapping.h> | |
| #include <asm/semaphore.h> | |
| #include <asm/uaccess.h> | |
| #include <scsi/scsi.h> | |
| #include <scsi/scsi_cmnd.h> | |
| #include <scsi/scsi_device.h> | |
| #include <scsi/scsi_host.h> | |
| #include "aacraid.h" | |
| /* values for inqd_pdt: Peripheral device type in plain English */ | |
| #define INQD_PDT_DA 0x00 /* Direct-access (DISK) device */ | |
| #define INQD_PDT_PROC 0x03 /* Processor device */ | |
| #define INQD_PDT_CHNGR 0x08 /* Changer (jukebox, scsi2) */ | |
| #define INQD_PDT_COMM 0x09 /* Communication device (scsi2) */ | |
| #define INQD_PDT_NOLUN2 0x1f /* Unknown Device (scsi2) */ | |
| #define INQD_PDT_NOLUN 0x7f /* Logical Unit Not Present */ | |
| #define INQD_PDT_DMASK 0x1F /* Peripheral Device Type Mask */ | |
| #define INQD_PDT_QMASK 0xE0 /* Peripheral Device Qualifer Mask */ | |
| /* | |
| * Sense codes | |
| */ | |
| #define SENCODE_NO_SENSE 0x00 | |
| #define SENCODE_END_OF_DATA 0x00 | |
| #define SENCODE_BECOMING_READY 0x04 | |
| #define SENCODE_INIT_CMD_REQUIRED 0x04 | |
| #define SENCODE_PARAM_LIST_LENGTH_ERROR 0x1A | |
| #define SENCODE_INVALID_COMMAND 0x20 | |
| #define SENCODE_LBA_OUT_OF_RANGE 0x21 | |
| #define SENCODE_INVALID_CDB_FIELD 0x24 | |
| #define SENCODE_LUN_NOT_SUPPORTED 0x25 | |
| #define SENCODE_INVALID_PARAM_FIELD 0x26 | |
| #define SENCODE_PARAM_NOT_SUPPORTED 0x26 | |
| #define SENCODE_PARAM_VALUE_INVALID 0x26 | |
| #define SENCODE_RESET_OCCURRED 0x29 | |
| #define SENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x3E | |
| #define SENCODE_INQUIRY_DATA_CHANGED 0x3F | |
| #define SENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x39 | |
| #define SENCODE_DIAGNOSTIC_FAILURE 0x40 | |
| #define SENCODE_INTERNAL_TARGET_FAILURE 0x44 | |
| #define SENCODE_INVALID_MESSAGE_ERROR 0x49 | |
| #define SENCODE_LUN_FAILED_SELF_CONFIG 0x4c | |
| #define SENCODE_OVERLAPPED_COMMAND 0x4E | |
| /* | |
| * Additional sense codes | |
| */ | |
| #define ASENCODE_NO_SENSE 0x00 | |
| #define ASENCODE_END_OF_DATA 0x05 | |
| #define ASENCODE_BECOMING_READY 0x01 | |
| #define ASENCODE_INIT_CMD_REQUIRED 0x02 | |
| #define ASENCODE_PARAM_LIST_LENGTH_ERROR 0x00 | |
| #define ASENCODE_INVALID_COMMAND 0x00 | |
| #define ASENCODE_LBA_OUT_OF_RANGE 0x00 | |
| #define ASENCODE_INVALID_CDB_FIELD 0x00 | |
| #define ASENCODE_LUN_NOT_SUPPORTED 0x00 | |
| #define ASENCODE_INVALID_PARAM_FIELD 0x00 | |
| #define ASENCODE_PARAM_NOT_SUPPORTED 0x01 | |
| #define ASENCODE_PARAM_VALUE_INVALID 0x02 | |
| #define ASENCODE_RESET_OCCURRED 0x00 | |
| #define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x00 | |
| #define ASENCODE_INQUIRY_DATA_CHANGED 0x03 | |
| #define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x00 | |
| #define ASENCODE_DIAGNOSTIC_FAILURE 0x80 | |
| #define ASENCODE_INTERNAL_TARGET_FAILURE 0x00 | |
| #define ASENCODE_INVALID_MESSAGE_ERROR 0x00 | |
| #define ASENCODE_LUN_FAILED_SELF_CONFIG 0x00 | |
| #define ASENCODE_OVERLAPPED_COMMAND 0x00 | |
| #define BYTE0(x) (unsigned char)(x) | |
| #define BYTE1(x) (unsigned char)((x) >> 8) | |
| #define BYTE2(x) (unsigned char)((x) >> 16) | |
| #define BYTE3(x) (unsigned char)((x) >> 24) | |
| /*------------------------------------------------------------------------------ | |
| * S T R U C T S / T Y P E D E F S | |
| *----------------------------------------------------------------------------*/ | |
| /* SCSI inquiry data */ | |
| struct inquiry_data { | |
| u8 inqd_pdt; /* Peripheral qualifier | Peripheral Device Type */ | |
| u8 inqd_dtq; /* RMB | Device Type Qualifier */ | |
| u8 inqd_ver; /* ISO version | ECMA version | ANSI-approved version */ | |
| u8 inqd_rdf; /* AENC | TrmIOP | Response data format */ | |
| u8 inqd_len; /* Additional length (n-4) */ | |
| u8 inqd_pad1[2];/* Reserved - must be zero */ | |
| u8 inqd_pad2; /* RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */ | |
| u8 inqd_vid[8]; /* Vendor ID */ | |
| u8 inqd_pid[16];/* Product ID */ | |
| u8 inqd_prl[4]; /* Product Revision Level */ | |
| }; | |
| /* | |
| * M O D U L E G L O B A L S | |
| */ | |
| static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* sgmap); | |
| static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg); | |
| static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg); | |
| static int aac_send_srb_fib(struct scsi_cmnd* scsicmd); | |
| #ifdef AAC_DETAILED_STATUS_INFO | |
| static char *aac_get_status_string(u32 status); | |
| #endif | |
| /* | |
| * Non dasd selection is handled entirely in aachba now | |
| */ | |
| static int nondasd = -1; | |
| static int dacmode = -1; | |
| static int commit = -1; | |
| int startup_timeout = 180; | |
| int aif_timeout = 120; | |
| module_param(nondasd, int, S_IRUGO|S_IWUSR); | |
| MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices. 0=off, 1=on"); | |
| module_param(dacmode, int, S_IRUGO|S_IWUSR); | |
| MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC. 0=off, 1=on"); | |
| module_param(commit, int, S_IRUGO|S_IWUSR); | |
| MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the adapter for foreign arrays.\nThis is typically needed in systems that do not have a BIOS. 0=off, 1=on"); | |
| module_param(startup_timeout, int, S_IRUGO|S_IWUSR); | |
| MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for adapter to have it's kernel up and\nrunning. This is typically adjusted for large systems that do not have a BIOS."); | |
| module_param(aif_timeout, int, S_IRUGO|S_IWUSR); | |
| MODULE_PARM_DESC(aif_timeout, "The duration of time in seconds to wait for applications to pick up AIFs before\nderegistering them. This is typically adjusted for heavily burdened systems."); | |
| int numacb = -1; | |
| module_param(numacb, int, S_IRUGO|S_IWUSR); | |
| MODULE_PARM_DESC(numacb, "Request a limit to the number of adapter control blocks (FIB) allocated. Valid values are 512 and down. Default is to use suggestion from Firmware."); | |
| int acbsize = -1; | |
| module_param(acbsize, int, S_IRUGO|S_IWUSR); | |
| MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB) size. Valid values are 512, 2048, 4096 and 8192. Default is to use suggestion from Firmware."); | |
| int expose_physicals = 0; | |
| module_param(expose_physicals, int, S_IRUGO|S_IWUSR); | |
| MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays. 0=off, 1=on"); | |
| /** | |
| * aac_get_config_status - check the adapter configuration | |
| * @common: adapter to query | |
| * | |
| * Query config status, and commit the configuration if needed. | |
| */ | |
| int aac_get_config_status(struct aac_dev *dev, int commit_flag) | |
| { | |
| int status = 0; | |
| struct fib * fibptr; | |
| if (!(fibptr = aac_fib_alloc(dev))) | |
| return -ENOMEM; | |
| aac_fib_init(fibptr); | |
| { | |
| struct aac_get_config_status *dinfo; | |
| dinfo = (struct aac_get_config_status *) fib_data(fibptr); | |
| dinfo->command = cpu_to_le32(VM_ContainerConfig); | |
| dinfo->type = cpu_to_le32(CT_GET_CONFIG_STATUS); | |
| dinfo->count = cpu_to_le32(sizeof(((struct aac_get_config_status_resp *)NULL)->data)); | |
| } | |
| status = aac_fib_send(ContainerCommand, | |
| fibptr, | |
| sizeof (struct aac_get_config_status), | |
| FsaNormal, | |
| 1, 1, | |
| NULL, NULL); | |
| if (status < 0 ) { | |
| printk(KERN_WARNING "aac_get_config_status: SendFIB failed.\n"); | |
| } else { | |
| struct aac_get_config_status_resp *reply | |
| = (struct aac_get_config_status_resp *) fib_data(fibptr); | |
| dprintk((KERN_WARNING | |
| "aac_get_config_status: response=%d status=%d action=%d\n", | |
| le32_to_cpu(reply->response), | |
| le32_to_cpu(reply->status), | |
| le32_to_cpu(reply->data.action))); | |
| if ((le32_to_cpu(reply->response) != ST_OK) || | |
| (le32_to_cpu(reply->status) != CT_OK) || | |
| (le32_to_cpu(reply->data.action) > CFACT_PAUSE)) { | |
| printk(KERN_WARNING "aac_get_config_status: Will not issue the Commit Configuration\n"); | |
| status = -EINVAL; | |
| } | |
| } | |
| aac_fib_complete(fibptr); | |
| /* Send a CT_COMMIT_CONFIG to enable discovery of devices */ | |
| if (status >= 0) { | |
| if ((commit == 1) || commit_flag) { | |
| struct aac_commit_config * dinfo; | |
| aac_fib_init(fibptr); | |
| dinfo = (struct aac_commit_config *) fib_data(fibptr); | |
| dinfo->command = cpu_to_le32(VM_ContainerConfig); | |
| dinfo->type = cpu_to_le32(CT_COMMIT_CONFIG); | |
| status = aac_fib_send(ContainerCommand, | |
| fibptr, | |
| sizeof (struct aac_commit_config), | |
| FsaNormal, | |
| 1, 1, | |
| NULL, NULL); | |
| aac_fib_complete(fibptr); | |
| } else if (commit == 0) { | |
| printk(KERN_WARNING | |
| "aac_get_config_status: Foreign device configurations are being ignored\n"); | |
| } | |
| } | |
| aac_fib_free(fibptr); | |
| return status; | |
| } | |
| /** | |
| * aac_get_containers - list containers | |
| * @common: adapter to probe | |
| * | |
| * Make a list of all containers on this controller | |
| */ | |
| int aac_get_containers(struct aac_dev *dev) | |
| { | |
| struct fsa_dev_info *fsa_dev_ptr; | |
| u32 index; | |
| int status = 0; | |
| struct fib * fibptr; | |
| unsigned instance; | |
| struct aac_get_container_count *dinfo; | |
| struct aac_get_container_count_resp *dresp; | |
| int maximum_num_containers = MAXIMUM_NUM_CONTAINERS; | |
| instance = dev->scsi_host_ptr->unique_id; | |
| if (!(fibptr = aac_fib_alloc(dev))) | |
| return -ENOMEM; | |
| aac_fib_init(fibptr); | |
| dinfo = (struct aac_get_container_count *) fib_data(fibptr); | |
| dinfo->command = cpu_to_le32(VM_ContainerConfig); | |
| dinfo->type = cpu_to_le32(CT_GET_CONTAINER_COUNT); | |
| status = aac_fib_send(ContainerCommand, | |
| fibptr, | |
| sizeof (struct aac_get_container_count), | |
| FsaNormal, | |
| 1, 1, | |
| NULL, NULL); | |
| if (status >= 0) { | |
| dresp = (struct aac_get_container_count_resp *)fib_data(fibptr); | |
| maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries); | |
| aac_fib_complete(fibptr); | |
| } | |
| if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS) | |
| maximum_num_containers = MAXIMUM_NUM_CONTAINERS; | |
| fsa_dev_ptr = (struct fsa_dev_info *) kmalloc( | |
| sizeof(*fsa_dev_ptr) * maximum_num_containers, GFP_KERNEL); | |
| if (!fsa_dev_ptr) { | |
| aac_fib_free(fibptr); | |
| return -ENOMEM; | |
| } | |
| memset(fsa_dev_ptr, 0, sizeof(*fsa_dev_ptr) * maximum_num_containers); | |
| dev->fsa_dev = fsa_dev_ptr; | |
| dev->maximum_num_containers = maximum_num_containers; | |
| for (index = 0; index < dev->maximum_num_containers; index++) { | |
| struct aac_query_mount *dinfo; | |
| struct aac_mount *dresp; | |
| fsa_dev_ptr[index].devname[0] = '\0'; | |
| aac_fib_init(fibptr); | |
| dinfo = (struct aac_query_mount *) fib_data(fibptr); | |
| dinfo->command = cpu_to_le32(VM_NameServe); | |
| dinfo->count = cpu_to_le32(index); | |
| dinfo->type = cpu_to_le32(FT_FILESYS); | |
| status = aac_fib_send(ContainerCommand, | |
| fibptr, | |
| sizeof (struct aac_query_mount), | |
| FsaNormal, | |
| 1, 1, | |
| NULL, NULL); | |
| if (status < 0 ) { | |
| printk(KERN_WARNING "aac_get_containers: SendFIB failed.\n"); | |
| break; | |
| } | |
| dresp = (struct aac_mount *)fib_data(fibptr); | |
| if ((le32_to_cpu(dresp->status) == ST_OK) && | |
| (le32_to_cpu(dresp->mnt[0].vol) == CT_NONE)) { | |
| dinfo->command = cpu_to_le32(VM_NameServe64); | |
| dinfo->count = cpu_to_le32(index); | |
| dinfo->type = cpu_to_le32(FT_FILESYS); | |
| if (aac_fib_send(ContainerCommand, | |
| fibptr, | |
| sizeof(struct aac_query_mount), | |
| FsaNormal, | |
| 1, 1, | |
| NULL, NULL) < 0) | |
| continue; | |
| } else | |
| dresp->mnt[0].capacityhigh = 0; | |
| dprintk ((KERN_DEBUG | |
| "VM_NameServe cid=%d status=%d vol=%d state=%d cap=%llu\n", | |
| (int)index, (int)le32_to_cpu(dresp->status), | |
| (int)le32_to_cpu(dresp->mnt[0].vol), | |
| (int)le32_to_cpu(dresp->mnt[0].state), | |
| ((u64)le32_to_cpu(dresp->mnt[0].capacity)) + | |
| (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32))); | |
| if ((le32_to_cpu(dresp->status) == ST_OK) && | |
| (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) && | |
| (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) { | |
| fsa_dev_ptr[index].valid = 1; | |
| fsa_dev_ptr[index].type = le32_to_cpu(dresp->mnt[0].vol); | |
| fsa_dev_ptr[index].size | |
| = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) + | |
| (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32); | |
| if (le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY) | |
| fsa_dev_ptr[index].ro = 1; | |
| } | |
| aac_fib_complete(fibptr); | |
| /* | |
| * If there are no more containers, then stop asking. | |
| */ | |
| if ((index + 1) >= le32_to_cpu(dresp->count)){ | |
| break; | |
| } | |
| } | |
| aac_fib_free(fibptr); | |
| return status; | |
| } | |
| static void aac_internal_transfer(struct scsi_cmnd *scsicmd, void *data, unsigned int offset, unsigned int len) | |
| { | |
| void *buf; | |
| unsigned int transfer_len; | |
| struct scatterlist *sg = scsicmd->request_buffer; | |
| if (scsicmd->use_sg) { | |
| buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset; | |
| transfer_len = min(sg->length, len + offset); | |
| } else { | |
| buf = scsicmd->request_buffer; | |
| transfer_len = min(scsicmd->request_bufflen, len + offset); | |
| } | |
| memcpy(buf + offset, data, transfer_len - offset); | |
| if (scsicmd->use_sg) | |
| kunmap_atomic(buf - sg->offset, KM_IRQ0); | |
| } | |
| static void get_container_name_callback(void *context, struct fib * fibptr) | |
| { | |
| struct aac_get_name_resp * get_name_reply; | |
| struct scsi_cmnd * scsicmd; | |
| scsicmd = (struct scsi_cmnd *) context; | |
| scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL; | |
| dprintk((KERN_DEBUG "get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies)); | |
| BUG_ON(fibptr == NULL); | |
| get_name_reply = (struct aac_get_name_resp *) fib_data(fibptr); | |
| /* Failure is irrelevant, using default value instead */ | |
| if ((le32_to_cpu(get_name_reply->status) == CT_OK) | |
| && (get_name_reply->data[0] != '\0')) { | |
| char *sp = get_name_reply->data; | |
| sp[sizeof(((struct aac_get_name_resp *)NULL)->data)-1] = '\0'; | |
| while (*sp == ' ') | |
| ++sp; | |
| if (*sp) { | |
| char d[sizeof(((struct inquiry_data *)NULL)->inqd_pid)]; | |
| int count = sizeof(d); | |
| char *dp = d; | |
| do { | |
| *dp++ = (*sp) ? *sp++ : ' '; | |
| } while (--count > 0); | |
| aac_internal_transfer(scsicmd, d, | |
| offsetof(struct inquiry_data, inqd_pid), sizeof(d)); | |
| } | |
| } | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | |
| aac_fib_complete(fibptr); | |
| aac_fib_free(fibptr); | |
| scsicmd->scsi_done(scsicmd); | |
| } | |
| /** | |
| * aac_get_container_name - get container name, none blocking. | |
| */ | |
| static int aac_get_container_name(struct scsi_cmnd * scsicmd, int cid) | |
| { | |
| int status; | |
| struct aac_get_name *dinfo; | |
| struct fib * cmd_fibcontext; | |
| struct aac_dev * dev; | |
| dev = (struct aac_dev *)scsicmd->device->host->hostdata; | |
| if (!(cmd_fibcontext = aac_fib_alloc(dev))) | |
| return -ENOMEM; | |
| aac_fib_init(cmd_fibcontext); | |
| dinfo = (struct aac_get_name *) fib_data(cmd_fibcontext); | |
| dinfo->command = cpu_to_le32(VM_ContainerConfig); | |
| dinfo->type = cpu_to_le32(CT_READ_NAME); | |
| dinfo->cid = cpu_to_le32(cid); | |
| dinfo->count = cpu_to_le32(sizeof(((struct aac_get_name_resp *)NULL)->data)); | |
| status = aac_fib_send(ContainerCommand, | |
| cmd_fibcontext, | |
| sizeof (struct aac_get_name), | |
| FsaNormal, | |
| 0, 1, | |
| (fib_callback) get_container_name_callback, | |
| (void *) scsicmd); | |
| /* | |
| * Check that the command queued to the controller | |
| */ | |
| if (status == -EINPROGRESS) { | |
| scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | |
| return 0; | |
| } | |
| printk(KERN_WARNING "aac_get_container_name: aac_fib_send failed with status: %d.\n", status); | |
| aac_fib_complete(cmd_fibcontext); | |
| aac_fib_free(cmd_fibcontext); | |
| return -1; | |
| } | |
| /** | |
| * aac_probe_container - query a logical volume | |
| * @dev: device to query | |
| * @cid: container identifier | |
| * | |
| * Queries the controller about the given volume. The volume information | |
| * is updated in the struct fsa_dev_info structure rather than returned. | |
| */ | |
| int aac_probe_container(struct aac_dev *dev, int cid) | |
| { | |
| struct fsa_dev_info *fsa_dev_ptr; | |
| int status; | |
| struct aac_query_mount *dinfo; | |
| struct aac_mount *dresp; | |
| struct fib * fibptr; | |
| unsigned instance; | |
| fsa_dev_ptr = dev->fsa_dev; | |
| if (!fsa_dev_ptr) | |
| return -ENOMEM; | |
| instance = dev->scsi_host_ptr->unique_id; | |
| if (!(fibptr = aac_fib_alloc(dev))) | |
| return -ENOMEM; | |
| aac_fib_init(fibptr); | |
| dinfo = (struct aac_query_mount *)fib_data(fibptr); | |
| dinfo->command = cpu_to_le32(VM_NameServe); | |
| dinfo->count = cpu_to_le32(cid); | |
| dinfo->type = cpu_to_le32(FT_FILESYS); | |
| status = aac_fib_send(ContainerCommand, | |
| fibptr, | |
| sizeof(struct aac_query_mount), | |
| FsaNormal, | |
| 1, 1, | |
| NULL, NULL); | |
| if (status < 0) { | |
| printk(KERN_WARNING "aacraid: aac_probe_container query failed.\n"); | |
| goto error; | |
| } | |
| dresp = (struct aac_mount *) fib_data(fibptr); | |
| if ((le32_to_cpu(dresp->status) == ST_OK) && | |
| (le32_to_cpu(dresp->mnt[0].vol) == CT_NONE)) { | |
| dinfo->command = cpu_to_le32(VM_NameServe64); | |
| dinfo->count = cpu_to_le32(cid); | |
| dinfo->type = cpu_to_le32(FT_FILESYS); | |
| if (aac_fib_send(ContainerCommand, | |
| fibptr, | |
| sizeof(struct aac_query_mount), | |
| FsaNormal, | |
| 1, 1, | |
| NULL, NULL) < 0) | |
| goto error; | |
| } else | |
| dresp->mnt[0].capacityhigh = 0; | |
| if ((le32_to_cpu(dresp->status) == ST_OK) && | |
| (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) && | |
| (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) { | |
| fsa_dev_ptr[cid].valid = 1; | |
| fsa_dev_ptr[cid].type = le32_to_cpu(dresp->mnt[0].vol); | |
| fsa_dev_ptr[cid].size | |
| = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) + | |
| (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32); | |
| if (le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY) | |
| fsa_dev_ptr[cid].ro = 1; | |
| } | |
| error: | |
| aac_fib_complete(fibptr); | |
| aac_fib_free(fibptr); | |
| return status; | |
| } | |
| /* Local Structure to set SCSI inquiry data strings */ | |
| struct scsi_inq { | |
| char vid[8]; /* Vendor ID */ | |
| char pid[16]; /* Product ID */ | |
| char prl[4]; /* Product Revision Level */ | |
| }; | |
| /** | |
| * InqStrCopy - string merge | |
| * @a: string to copy from | |
| * @b: string to copy to | |
| * | |
| * Copy a String from one location to another | |
| * without copying \0 | |
| */ | |
| static void inqstrcpy(char *a, char *b) | |
| { | |
| while(*a != (char)0) | |
| *b++ = *a++; | |
| } | |
| static char *container_types[] = { | |
| "None", | |
| "Volume", | |
| "Mirror", | |
| "Stripe", | |
| "RAID5", | |
| "SSRW", | |
| "SSRO", | |
| "Morph", | |
| "Legacy", | |
| "RAID4", | |
| "RAID10", | |
| "RAID00", | |
| "V-MIRRORS", | |
| "PSEUDO R4", | |
| "RAID50", | |
| "RAID5D", | |
| "RAID5D0", | |
| "RAID1E", | |
| "RAID6", | |
| "RAID60", | |
| "Unknown" | |
| }; | |
| /* Function: setinqstr | |
| * | |
| * Arguments: [1] pointer to void [1] int | |
| * | |
| * Purpose: Sets SCSI inquiry data strings for vendor, product | |
| * and revision level. Allows strings to be set in platform dependant | |
| * files instead of in OS dependant driver source. | |
| */ | |
| static void setinqstr(struct aac_dev *dev, void *data, int tindex) | |
| { | |
| struct scsi_inq *str; | |
| str = (struct scsi_inq *)(data); /* cast data to scsi inq block */ | |
| memset(str, ' ', sizeof(*str)); | |
| if (dev->supplement_adapter_info.AdapterTypeText[0]) { | |
| char * cp = dev->supplement_adapter_info.AdapterTypeText; | |
| int c = sizeof(str->vid); | |
| while (*cp && *cp != ' ' && --c) | |
| ++cp; | |
| c = *cp; | |
| *cp = '\0'; | |
| inqstrcpy (dev->supplement_adapter_info.AdapterTypeText, | |
| str->vid); | |
| *cp = c; | |
| while (*cp && *cp != ' ') | |
| ++cp; | |
| while (*cp == ' ') | |
| ++cp; | |
| /* last six chars reserved for vol type */ | |
| c = 0; | |
| if (strlen(cp) > sizeof(str->pid)) { | |
| c = cp[sizeof(str->pid)]; | |
| cp[sizeof(str->pid)] = '\0'; | |
| } | |
| inqstrcpy (cp, str->pid); | |
| if (c) | |
| cp[sizeof(str->pid)] = c; | |
| } else { | |
| struct aac_driver_ident *mp = aac_get_driver_ident(dev->cardtype); | |
| inqstrcpy (mp->vname, str->vid); | |
| /* last six chars reserved for vol type */ | |
| inqstrcpy (mp->model, str->pid); | |
| } | |
| if (tindex < ARRAY_SIZE(container_types)){ | |
| char *findit = str->pid; | |
| for ( ; *findit != ' '; findit++); /* walk till we find a space */ | |
| /* RAID is superfluous in the context of a RAID device */ | |
| if (memcmp(findit-4, "RAID", 4) == 0) | |
| *(findit -= 4) = ' '; | |
| if (((findit - str->pid) + strlen(container_types[tindex])) | |
| < (sizeof(str->pid) + sizeof(str->prl))) | |
| inqstrcpy (container_types[tindex], findit + 1); | |
| } | |
| inqstrcpy ("V1.0", str->prl); | |
| } | |
| static void set_sense(u8 *sense_buf, u8 sense_key, u8 sense_code, | |
| u8 a_sense_code, u8 incorrect_length, | |
| u8 bit_pointer, u16 field_pointer, | |
| u32 residue) | |
| { | |
| sense_buf[0] = 0xF0; /* Sense data valid, err code 70h (current error) */ | |
| sense_buf[1] = 0; /* Segment number, always zero */ | |
| if (incorrect_length) { | |
| sense_buf[2] = sense_key | 0x20;/* Set ILI bit | sense key */ | |
| sense_buf[3] = BYTE3(residue); | |
| sense_buf[4] = BYTE2(residue); | |
| sense_buf[5] = BYTE1(residue); | |
| sense_buf[6] = BYTE0(residue); | |
| } else | |
| sense_buf[2] = sense_key; /* Sense key */ | |
| if (sense_key == ILLEGAL_REQUEST) | |
| sense_buf[7] = 10; /* Additional sense length */ | |
| else | |
| sense_buf[7] = 6; /* Additional sense length */ | |
| sense_buf[12] = sense_code; /* Additional sense code */ | |
| sense_buf[13] = a_sense_code; /* Additional sense code qualifier */ | |
| if (sense_key == ILLEGAL_REQUEST) { | |
| sense_buf[15] = 0; | |
| if (sense_code == SENCODE_INVALID_PARAM_FIELD) | |
| sense_buf[15] = 0x80;/* Std sense key specific field */ | |
| /* Illegal parameter is in the parameter block */ | |
| if (sense_code == SENCODE_INVALID_CDB_FIELD) | |
| sense_buf[15] = 0xc0;/* Std sense key specific field */ | |
| /* Illegal parameter is in the CDB block */ | |
| sense_buf[15] |= bit_pointer; | |
| sense_buf[16] = field_pointer >> 8; /* MSB */ | |
| sense_buf[17] = field_pointer; /* LSB */ | |
| } | |
| } | |
| int aac_get_adapter_info(struct aac_dev* dev) | |
| { | |
| struct fib* fibptr; | |
| int rcode; | |
| u32 tmp; | |
| struct aac_adapter_info *info; | |
| struct aac_bus_info *command; | |
| struct aac_bus_info_response *bus_info; | |
| if (!(fibptr = aac_fib_alloc(dev))) | |
| return -ENOMEM; | |
| aac_fib_init(fibptr); | |
| info = (struct aac_adapter_info *) fib_data(fibptr); | |
| memset(info,0,sizeof(*info)); | |
| rcode = aac_fib_send(RequestAdapterInfo, | |
| fibptr, | |
| sizeof(*info), | |
| FsaNormal, | |
| -1, 1, /* First `interrupt' command uses special wait */ | |
| NULL, | |
| NULL); | |
| if (rcode < 0) { | |
| aac_fib_complete(fibptr); | |
| aac_fib_free(fibptr); | |
| return rcode; | |
| } | |
| memcpy(&dev->adapter_info, info, sizeof(*info)); | |
| if (dev->adapter_info.options & AAC_OPT_SUPPLEMENT_ADAPTER_INFO) { | |
| struct aac_supplement_adapter_info * info; | |
| aac_fib_init(fibptr); | |
| info = (struct aac_supplement_adapter_info *) fib_data(fibptr); | |
| memset(info,0,sizeof(*info)); | |
| rcode = aac_fib_send(RequestSupplementAdapterInfo, | |
| fibptr, | |
| sizeof(*info), | |
| FsaNormal, | |
| 1, 1, | |
| NULL, | |
| NULL); | |
| if (rcode >= 0) | |
| memcpy(&dev->supplement_adapter_info, info, sizeof(*info)); | |
| } | |
| /* | |
| * GetBusInfo | |
| */ | |
| aac_fib_init(fibptr); | |
| bus_info = (struct aac_bus_info_response *) fib_data(fibptr); | |
| memset(bus_info, 0, sizeof(*bus_info)); | |
| command = (struct aac_bus_info *)bus_info; | |
| command->Command = cpu_to_le32(VM_Ioctl); | |
| command->ObjType = cpu_to_le32(FT_DRIVE); | |
| command->MethodId = cpu_to_le32(1); | |
| command->CtlCmd = cpu_to_le32(GetBusInfo); | |
| rcode = aac_fib_send(ContainerCommand, | |
| fibptr, | |
| sizeof (*bus_info), | |
| FsaNormal, | |
| 1, 1, | |
| NULL, NULL); | |
| if (rcode >= 0 && le32_to_cpu(bus_info->Status) == ST_OK) { | |
| dev->maximum_num_physicals = le32_to_cpu(bus_info->TargetsPerBus); | |
| dev->maximum_num_channels = le32_to_cpu(bus_info->BusCount); | |
| } | |
| if (!dev->in_reset) { | |
| tmp = le32_to_cpu(dev->adapter_info.kernelrev); | |
| printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n", | |
| dev->name, | |
| dev->id, | |
| tmp>>24, | |
| (tmp>>16)&0xff, | |
| tmp&0xff, | |
| le32_to_cpu(dev->adapter_info.kernelbuild), | |
| (int)sizeof(dev->supplement_adapter_info.BuildDate), | |
| dev->supplement_adapter_info.BuildDate); | |
| tmp = le32_to_cpu(dev->adapter_info.monitorrev); | |
| printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n", | |
| dev->name, dev->id, | |
| tmp>>24,(tmp>>16)&0xff,tmp&0xff, | |
| le32_to_cpu(dev->adapter_info.monitorbuild)); | |
| tmp = le32_to_cpu(dev->adapter_info.biosrev); | |
| printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n", | |
| dev->name, dev->id, | |
| tmp>>24,(tmp>>16)&0xff,tmp&0xff, | |
| le32_to_cpu(dev->adapter_info.biosbuild)); | |
| if (le32_to_cpu(dev->adapter_info.serial[0]) != 0xBAD0) | |
| printk(KERN_INFO "%s%d: serial %x\n", | |
| dev->name, dev->id, | |
| le32_to_cpu(dev->adapter_info.serial[0])); | |
| } | |
| dev->nondasd_support = 0; | |
| dev->raid_scsi_mode = 0; | |
| if(dev->adapter_info.options & AAC_OPT_NONDASD){ | |
| dev->nondasd_support = 1; | |
| } | |
| /* | |
| * If the firmware supports ROMB RAID/SCSI mode and we are currently | |
| * in RAID/SCSI mode, set the flag. For now if in this mode we will | |
| * force nondasd support on. If we decide to allow the non-dasd flag | |
| * additional changes changes will have to be made to support | |
| * RAID/SCSI. the function aac_scsi_cmd in this module will have to be | |
| * changed to support the new dev->raid_scsi_mode flag instead of | |
| * leaching off of the dev->nondasd_support flag. Also in linit.c the | |
| * function aac_detect will have to be modified where it sets up the | |
| * max number of channels based on the aac->nondasd_support flag only. | |
| */ | |
| if ((dev->adapter_info.options & AAC_OPT_SCSI_MANAGED) && | |
| (dev->adapter_info.options & AAC_OPT_RAID_SCSI_MODE)) { | |
| dev->nondasd_support = 1; | |
| dev->raid_scsi_mode = 1; | |
| } | |
| if (dev->raid_scsi_mode != 0) | |
| printk(KERN_INFO "%s%d: ROMB RAID/SCSI mode enabled\n", | |
| dev->name, dev->id); | |
| if(nondasd != -1) { | |
| dev->nondasd_support = (nondasd!=0); | |
| } | |
| if(dev->nondasd_support != 0){ | |
| printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id); | |
| } | |
| dev->dac_support = 0; | |
| if( (sizeof(dma_addr_t) > 4) && (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64)){ | |
| printk(KERN_INFO "%s%d: 64bit support enabled.\n", dev->name, dev->id); | |
| dev->dac_support = 1; | |
| } | |
| if(dacmode != -1) { | |
| dev->dac_support = (dacmode!=0); | |
| } | |
| if(dev->dac_support != 0) { | |
| if (!pci_set_dma_mask(dev->pdev, DMA_64BIT_MASK) && | |
| !pci_set_consistent_dma_mask(dev->pdev, DMA_64BIT_MASK)) { | |
| printk(KERN_INFO"%s%d: 64 Bit DAC enabled\n", | |
| dev->name, dev->id); | |
| } else if (!pci_set_dma_mask(dev->pdev, DMA_32BIT_MASK) && | |
| !pci_set_consistent_dma_mask(dev->pdev, DMA_32BIT_MASK)) { | |
| printk(KERN_INFO"%s%d: DMA mask set failed, 64 Bit DAC disabled\n", | |
| dev->name, dev->id); | |
| dev->dac_support = 0; | |
| } else { | |
| printk(KERN_WARNING"%s%d: No suitable DMA available.\n", | |
| dev->name, dev->id); | |
| rcode = -ENOMEM; | |
| } | |
| } | |
| /* | |
| * 57 scatter gather elements | |
| */ | |
| if (!(dev->raw_io_interface)) { | |
| dev->scsi_host_ptr->sg_tablesize = (dev->max_fib_size - | |
| sizeof(struct aac_fibhdr) - | |
| sizeof(struct aac_write) + sizeof(struct sgentry)) / | |
| sizeof(struct sgentry); | |
| if (dev->dac_support) { | |
| /* | |
| * 38 scatter gather elements | |
| */ | |
| dev->scsi_host_ptr->sg_tablesize = | |
| (dev->max_fib_size - | |
| sizeof(struct aac_fibhdr) - | |
| sizeof(struct aac_write64) + | |
| sizeof(struct sgentry64)) / | |
| sizeof(struct sgentry64); | |
| } | |
| dev->scsi_host_ptr->max_sectors = AAC_MAX_32BIT_SGBCOUNT; | |
| if(!(dev->adapter_info.options & AAC_OPT_NEW_COMM)) { | |
| /* | |
| * Worst case size that could cause sg overflow when | |
| * we break up SG elements that are larger than 64KB. | |
| * Would be nice if we could tell the SCSI layer what | |
| * the maximum SG element size can be. Worst case is | |
| * (sg_tablesize-1) 4KB elements with one 64KB | |
| * element. | |
| * 32bit -> 468 or 238KB 64bit -> 424 or 212KB | |
| */ | |
| dev->scsi_host_ptr->max_sectors = | |
| (dev->scsi_host_ptr->sg_tablesize * 8) + 112; | |
| } | |
| } | |
| aac_fib_complete(fibptr); | |
| aac_fib_free(fibptr); | |
| return rcode; | |
| } | |
| static void io_callback(void *context, struct fib * fibptr) | |
| { | |
| struct aac_dev *dev; | |
| struct aac_read_reply *readreply; | |
| struct scsi_cmnd *scsicmd; | |
| u32 cid; | |
| scsicmd = (struct scsi_cmnd *) context; | |
| scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL; | |
| dev = (struct aac_dev *)scsicmd->device->host->hostdata; | |
| cid = scmd_id(scsicmd); | |
| if (nblank(dprintk(x))) { | |
| u64 lba; | |
| switch (scsicmd->cmnd[0]) { | |
| case WRITE_6: | |
| case READ_6: | |
| lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | | |
| (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3]; | |
| break; | |
| case WRITE_16: | |
| case READ_16: | |
| lba = ((u64)scsicmd->cmnd[2] << 56) | | |
| ((u64)scsicmd->cmnd[3] << 48) | | |
| ((u64)scsicmd->cmnd[4] << 40) | | |
| ((u64)scsicmd->cmnd[5] << 32) | | |
| ((u64)scsicmd->cmnd[6] << 24) | | |
| (scsicmd->cmnd[7] << 16) | | |
| (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; | |
| break; | |
| case WRITE_12: | |
| case READ_12: | |
| lba = ((u64)scsicmd->cmnd[2] << 24) | | |
| (scsicmd->cmnd[3] << 16) | | |
| (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | |
| break; | |
| default: | |
| lba = ((u64)scsicmd->cmnd[2] << 24) | | |
| (scsicmd->cmnd[3] << 16) | | |
| (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | |
| break; | |
| } | |
| printk(KERN_DEBUG | |
| "io_callback[cpu %d]: lba = %llu, t = %ld.\n", | |
| smp_processor_id(), (unsigned long long)lba, jiffies); | |
| } | |
| BUG_ON(fibptr == NULL); | |
| if(scsicmd->use_sg) | |
| pci_unmap_sg(dev->pdev, | |
| (struct scatterlist *)scsicmd->request_buffer, | |
| scsicmd->use_sg, | |
| scsicmd->sc_data_direction); | |
| else if(scsicmd->request_bufflen) | |
| pci_unmap_single(dev->pdev, scsicmd->SCp.dma_handle, | |
| scsicmd->request_bufflen, | |
| scsicmd->sc_data_direction); | |
| readreply = (struct aac_read_reply *)fib_data(fibptr); | |
| if (le32_to_cpu(readreply->status) == ST_OK) | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | |
| else { | |
| #ifdef AAC_DETAILED_STATUS_INFO | |
| printk(KERN_WARNING "io_callback: io failed, status = %d\n", | |
| le32_to_cpu(readreply->status)); | |
| #endif | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; | |
| set_sense((u8 *) &dev->fsa_dev[cid].sense_data, | |
| HARDWARE_ERROR, | |
| SENCODE_INTERNAL_TARGET_FAILURE, | |
| ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, | |
| 0, 0); | |
| memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | |
| (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer)) | |
| ? sizeof(scsicmd->sense_buffer) | |
| : sizeof(dev->fsa_dev[cid].sense_data)); | |
| } | |
| aac_fib_complete(fibptr); | |
| aac_fib_free(fibptr); | |
| scsicmd->scsi_done(scsicmd); | |
| } | |
| static int aac_read(struct scsi_cmnd * scsicmd, int cid) | |
| { | |
| u64 lba; | |
| u32 count; | |
| int status; | |
| u16 fibsize; | |
| struct aac_dev *dev; | |
| struct fib * cmd_fibcontext; | |
| dev = (struct aac_dev *)scsicmd->device->host->hostdata; | |
| /* | |
| * Get block address and transfer length | |
| */ | |
| switch (scsicmd->cmnd[0]) { | |
| case READ_6: | |
| dprintk((KERN_DEBUG "aachba: received a read(6) command on id %d.\n", cid)); | |
| lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | | |
| (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3]; | |
| count = scsicmd->cmnd[4]; | |
| if (count == 0) | |
| count = 256; | |
| break; | |
| case READ_16: | |
| dprintk((KERN_DEBUG "aachba: received a read(16) command on id %d.\n", cid)); | |
| lba = ((u64)scsicmd->cmnd[2] << 56) | | |
| ((u64)scsicmd->cmnd[3] << 48) | | |
| ((u64)scsicmd->cmnd[4] << 40) | | |
| ((u64)scsicmd->cmnd[5] << 32) | | |
| ((u64)scsicmd->cmnd[6] << 24) | | |
| (scsicmd->cmnd[7] << 16) | | |
| (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; | |
| count = (scsicmd->cmnd[10] << 24) | | |
| (scsicmd->cmnd[11] << 16) | | |
| (scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13]; | |
| break; | |
| case READ_12: | |
| dprintk((KERN_DEBUG "aachba: received a read(12) command on id %d.\n", cid)); | |
| lba = ((u64)scsicmd->cmnd[2] << 24) | | |
| (scsicmd->cmnd[3] << 16) | | |
| (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | |
| count = (scsicmd->cmnd[6] << 24) | | |
| (scsicmd->cmnd[7] << 16) | | |
| (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; | |
| break; | |
| default: | |
| dprintk((KERN_DEBUG "aachba: received a read(10) command on id %d.\n", cid)); | |
| lba = ((u64)scsicmd->cmnd[2] << 24) | | |
| (scsicmd->cmnd[3] << 16) | | |
| (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | |
| count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8]; | |
| break; | |
| } | |
| dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %llu, t = %ld.\n", | |
| smp_processor_id(), (unsigned long long)lba, jiffies)); | |
| if ((!(dev->raw_io_interface) || !(dev->raw_io_64)) && | |
| (lba & 0xffffffff00000000LL)) { | |
| dprintk((KERN_DEBUG "aac_read: Illegal lba\n")); | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | | |
| SAM_STAT_CHECK_CONDITION; | |
| set_sense((u8 *) &dev->fsa_dev[cid].sense_data, | |
| HARDWARE_ERROR, | |
| SENCODE_INTERNAL_TARGET_FAILURE, | |
| ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, | |
| 0, 0); | |
| memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | |
| (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer)) | |
| ? sizeof(scsicmd->sense_buffer) | |
| : sizeof(dev->fsa_dev[cid].sense_data)); | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| } | |
| /* | |
| * Alocate and initialize a Fib | |
| */ | |
| if (!(cmd_fibcontext = aac_fib_alloc(dev))) { | |
| return -1; | |
| } | |
| aac_fib_init(cmd_fibcontext); | |
| if (dev->raw_io_interface) { | |
| struct aac_raw_io *readcmd; | |
| readcmd = (struct aac_raw_io *) fib_data(cmd_fibcontext); | |
| readcmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff)); | |
| readcmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32)); | |
| readcmd->count = cpu_to_le32(count<<9); | |
| readcmd->cid = cpu_to_le16(cid); | |
| readcmd->flags = cpu_to_le16(1); | |
| readcmd->bpTotal = 0; | |
| readcmd->bpComplete = 0; | |
| aac_build_sgraw(scsicmd, &readcmd->sg); | |
| fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(readcmd->sg.count) - 1) * sizeof (struct sgentryraw)); | |
| BUG_ON(fibsize > (dev->max_fib_size - sizeof(struct aac_fibhdr))); | |
| /* | |
| * Now send the Fib to the adapter | |
| */ | |
| status = aac_fib_send(ContainerRawIo, | |
| cmd_fibcontext, | |
| fibsize, | |
| FsaNormal, | |
| 0, 1, | |
| (fib_callback) io_callback, | |
| (void *) scsicmd); | |
| } else if (dev->dac_support == 1) { | |
| struct aac_read64 *readcmd; | |
| readcmd = (struct aac_read64 *) fib_data(cmd_fibcontext); | |
| readcmd->command = cpu_to_le32(VM_CtHostRead64); | |
| readcmd->cid = cpu_to_le16(cid); | |
| readcmd->sector_count = cpu_to_le16(count); | |
| readcmd->block = cpu_to_le32((u32)(lba&0xffffffff)); | |
| readcmd->pad = 0; | |
| readcmd->flags = 0; | |
| aac_build_sg64(scsicmd, &readcmd->sg); | |
| fibsize = sizeof(struct aac_read64) + | |
| ((le32_to_cpu(readcmd->sg.count) - 1) * | |
| sizeof (struct sgentry64)); | |
| BUG_ON (fibsize > (dev->max_fib_size - | |
| sizeof(struct aac_fibhdr))); | |
| /* | |
| * Now send the Fib to the adapter | |
| */ | |
| status = aac_fib_send(ContainerCommand64, | |
| cmd_fibcontext, | |
| fibsize, | |
| FsaNormal, | |
| 0, 1, | |
| (fib_callback) io_callback, | |
| (void *) scsicmd); | |
| } else { | |
| struct aac_read *readcmd; | |
| readcmd = (struct aac_read *) fib_data(cmd_fibcontext); | |
| readcmd->command = cpu_to_le32(VM_CtBlockRead); | |
| readcmd->cid = cpu_to_le32(cid); | |
| readcmd->block = cpu_to_le32((u32)(lba&0xffffffff)); | |
| readcmd->count = cpu_to_le32(count * 512); | |
| aac_build_sg(scsicmd, &readcmd->sg); | |
| fibsize = sizeof(struct aac_read) + | |
| ((le32_to_cpu(readcmd->sg.count) - 1) * | |
| sizeof (struct sgentry)); | |
| BUG_ON (fibsize > (dev->max_fib_size - | |
| sizeof(struct aac_fibhdr))); | |
| /* | |
| * Now send the Fib to the adapter | |
| */ | |
| status = aac_fib_send(ContainerCommand, | |
| cmd_fibcontext, | |
| fibsize, | |
| FsaNormal, | |
| 0, 1, | |
| (fib_callback) io_callback, | |
| (void *) scsicmd); | |
| } | |
| /* | |
| * Check that the command queued to the controller | |
| */ | |
| if (status == -EINPROGRESS) { | |
| scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | |
| return 0; | |
| } | |
| printk(KERN_WARNING "aac_read: aac_fib_send failed with status: %d.\n", status); | |
| /* | |
| * For some reason, the Fib didn't queue, return QUEUE_FULL | |
| */ | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL; | |
| scsicmd->scsi_done(scsicmd); | |
| aac_fib_complete(cmd_fibcontext); | |
| aac_fib_free(cmd_fibcontext); | |
| return 0; | |
| } | |
| static int aac_write(struct scsi_cmnd * scsicmd, int cid) | |
| { | |
| u64 lba; | |
| u32 count; | |
| int status; | |
| u16 fibsize; | |
| struct aac_dev *dev; | |
| struct fib * cmd_fibcontext; | |
| dev = (struct aac_dev *)scsicmd->device->host->hostdata; | |
| /* | |
| * Get block address and transfer length | |
| */ | |
| if (scsicmd->cmnd[0] == WRITE_6) /* 6 byte command */ | |
| { | |
| lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3]; | |
| count = scsicmd->cmnd[4]; | |
| if (count == 0) | |
| count = 256; | |
| } else if (scsicmd->cmnd[0] == WRITE_16) { /* 16 byte command */ | |
| dprintk((KERN_DEBUG "aachba: received a write(16) command on id %d.\n", cid)); | |
| lba = ((u64)scsicmd->cmnd[2] << 56) | | |
| ((u64)scsicmd->cmnd[3] << 48) | | |
| ((u64)scsicmd->cmnd[4] << 40) | | |
| ((u64)scsicmd->cmnd[5] << 32) | | |
| ((u64)scsicmd->cmnd[6] << 24) | | |
| (scsicmd->cmnd[7] << 16) | | |
| (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; | |
| count = (scsicmd->cmnd[10] << 24) | (scsicmd->cmnd[11] << 16) | | |
| (scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13]; | |
| } else if (scsicmd->cmnd[0] == WRITE_12) { /* 12 byte command */ | |
| dprintk((KERN_DEBUG "aachba: received a write(12) command on id %d.\n", cid)); | |
| lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | |
| | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | |
| count = (scsicmd->cmnd[6] << 24) | (scsicmd->cmnd[7] << 16) | |
| | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; | |
| } else { | |
| dprintk((KERN_DEBUG "aachba: received a write(10) command on id %d.\n", cid)); | |
| lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; | |
| count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8]; | |
| } | |
| dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %llu, t = %ld.\n", | |
| smp_processor_id(), (unsigned long long)lba, jiffies)); | |
| if ((!(dev->raw_io_interface) || !(dev->raw_io_64)) | |
| && (lba & 0xffffffff00000000LL)) { | |
| dprintk((KERN_DEBUG "aac_write: Illegal lba\n")); | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; | |
| set_sense((u8 *) &dev->fsa_dev[cid].sense_data, | |
| HARDWARE_ERROR, | |
| SENCODE_INTERNAL_TARGET_FAILURE, | |
| ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, | |
| 0, 0); | |
| memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | |
| (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer)) | |
| ? sizeof(scsicmd->sense_buffer) | |
| : sizeof(dev->fsa_dev[cid].sense_data)); | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| } | |
| /* | |
| * Allocate and initialize a Fib then setup a BlockWrite command | |
| */ | |
| if (!(cmd_fibcontext = aac_fib_alloc(dev))) { | |
| scsicmd->result = DID_ERROR << 16; | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| } | |
| aac_fib_init(cmd_fibcontext); | |
| if (dev->raw_io_interface) { | |
| struct aac_raw_io *writecmd; | |
| writecmd = (struct aac_raw_io *) fib_data(cmd_fibcontext); | |
| writecmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff)); | |
| writecmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32)); | |
| writecmd->count = cpu_to_le32(count<<9); | |
| writecmd->cid = cpu_to_le16(cid); | |
| writecmd->flags = 0; | |
| writecmd->bpTotal = 0; | |
| writecmd->bpComplete = 0; | |
| aac_build_sgraw(scsicmd, &writecmd->sg); | |
| fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(writecmd->sg.count) - 1) * sizeof (struct sgentryraw)); | |
| BUG_ON(fibsize > (dev->max_fib_size - sizeof(struct aac_fibhdr))); | |
| /* | |
| * Now send the Fib to the adapter | |
| */ | |
| status = aac_fib_send(ContainerRawIo, | |
| cmd_fibcontext, | |
| fibsize, | |
| FsaNormal, | |
| 0, 1, | |
| (fib_callback) io_callback, | |
| (void *) scsicmd); | |
| } else if (dev->dac_support == 1) { | |
| struct aac_write64 *writecmd; | |
| writecmd = (struct aac_write64 *) fib_data(cmd_fibcontext); | |
| writecmd->command = cpu_to_le32(VM_CtHostWrite64); | |
| writecmd->cid = cpu_to_le16(cid); | |
| writecmd->sector_count = cpu_to_le16(count); | |
| writecmd->block = cpu_to_le32((u32)(lba&0xffffffff)); | |
| writecmd->pad = 0; | |
| writecmd->flags = 0; | |
| aac_build_sg64(scsicmd, &writecmd->sg); | |
| fibsize = sizeof(struct aac_write64) + | |
| ((le32_to_cpu(writecmd->sg.count) - 1) * | |
| sizeof (struct sgentry64)); | |
| BUG_ON (fibsize > (dev->max_fib_size - | |
| sizeof(struct aac_fibhdr))); | |
| /* | |
| * Now send the Fib to the adapter | |
| */ | |
| status = aac_fib_send(ContainerCommand64, | |
| cmd_fibcontext, | |
| fibsize, | |
| FsaNormal, | |
| 0, 1, | |
| (fib_callback) io_callback, | |
| (void *) scsicmd); | |
| } else { | |
| struct aac_write *writecmd; | |
| writecmd = (struct aac_write *) fib_data(cmd_fibcontext); | |
| writecmd->command = cpu_to_le32(VM_CtBlockWrite); | |
| writecmd->cid = cpu_to_le32(cid); | |
| writecmd->block = cpu_to_le32((u32)(lba&0xffffffff)); | |
| writecmd->count = cpu_to_le32(count * 512); | |
| writecmd->sg.count = cpu_to_le32(1); | |
| /* ->stable is not used - it did mean which type of write */ | |
| aac_build_sg(scsicmd, &writecmd->sg); | |
| fibsize = sizeof(struct aac_write) + | |
| ((le32_to_cpu(writecmd->sg.count) - 1) * | |
| sizeof (struct sgentry)); | |
| BUG_ON (fibsize > (dev->max_fib_size - | |
| sizeof(struct aac_fibhdr))); | |
| /* | |
| * Now send the Fib to the adapter | |
| */ | |
| status = aac_fib_send(ContainerCommand, | |
| cmd_fibcontext, | |
| fibsize, | |
| FsaNormal, | |
| 0, 1, | |
| (fib_callback) io_callback, | |
| (void *) scsicmd); | |
| } | |
| /* | |
| * Check that the command queued to the controller | |
| */ | |
| if (status == -EINPROGRESS) { | |
| scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | |
| return 0; | |
| } | |
| printk(KERN_WARNING "aac_write: aac_fib_send failed with status: %d\n", status); | |
| /* | |
| * For some reason, the Fib didn't queue, return QUEUE_FULL | |
| */ | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL; | |
| scsicmd->scsi_done(scsicmd); | |
| aac_fib_complete(cmd_fibcontext); | |
| aac_fib_free(cmd_fibcontext); | |
| return 0; | |
| } | |
| static void synchronize_callback(void *context, struct fib *fibptr) | |
| { | |
| struct aac_synchronize_reply *synchronizereply; | |
| struct scsi_cmnd *cmd; | |
| cmd = context; | |
| cmd->SCp.phase = AAC_OWNER_MIDLEVEL; | |
| dprintk((KERN_DEBUG "synchronize_callback[cpu %d]: t = %ld.\n", | |
| smp_processor_id(), jiffies)); | |
| BUG_ON(fibptr == NULL); | |
| synchronizereply = fib_data(fibptr); | |
| if (le32_to_cpu(synchronizereply->status) == CT_OK) | |
| cmd->result = DID_OK << 16 | | |
| COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | |
| else { | |
| struct scsi_device *sdev = cmd->device; | |
| struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata; | |
| u32 cid = sdev_id(sdev); | |
| printk(KERN_WARNING | |
| "synchronize_callback: synchronize failed, status = %d\n", | |
| le32_to_cpu(synchronizereply->status)); | |
| cmd->result = DID_OK << 16 | | |
| COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; | |
| set_sense((u8 *)&dev->fsa_dev[cid].sense_data, | |
| HARDWARE_ERROR, | |
| SENCODE_INTERNAL_TARGET_FAILURE, | |
| ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, | |
| 0, 0); | |
| memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | |
| min(sizeof(dev->fsa_dev[cid].sense_data), | |
| sizeof(cmd->sense_buffer))); | |
| } | |
| aac_fib_complete(fibptr); | |
| aac_fib_free(fibptr); | |
| cmd->scsi_done(cmd); | |
| } | |
| static int aac_synchronize(struct scsi_cmnd *scsicmd, int cid) | |
| { | |
| int status; | |
| struct fib *cmd_fibcontext; | |
| struct aac_synchronize *synchronizecmd; | |
| struct scsi_cmnd *cmd; | |
| struct scsi_device *sdev = scsicmd->device; | |
| int active = 0; | |
| struct aac_dev *aac; | |
| unsigned long flags; | |
| /* | |
| * Wait for all outstanding queued commands to complete to this | |
| * specific target (block). | |
| */ | |
| spin_lock_irqsave(&sdev->list_lock, flags); | |
| list_for_each_entry(cmd, &sdev->cmd_list, list) | |
| if (cmd != scsicmd && cmd->SCp.phase == AAC_OWNER_FIRMWARE) { | |
| ++active; | |
| break; | |
| } | |
| spin_unlock_irqrestore(&sdev->list_lock, flags); | |
| /* | |
| * Yield the processor (requeue for later) | |
| */ | |
| if (active) | |
| return SCSI_MLQUEUE_DEVICE_BUSY; | |
| aac = (struct aac_dev *)scsicmd->device->host->hostdata; | |
| if (aac->in_reset) | |
| return SCSI_MLQUEUE_HOST_BUSY; | |
| /* | |
| * Allocate and initialize a Fib | |
| */ | |
| if (!(cmd_fibcontext = aac_fib_alloc(aac))) | |
| return SCSI_MLQUEUE_HOST_BUSY; | |
| aac_fib_init(cmd_fibcontext); | |
| synchronizecmd = fib_data(cmd_fibcontext); | |
| synchronizecmd->command = cpu_to_le32(VM_ContainerConfig); | |
| synchronizecmd->type = cpu_to_le32(CT_FLUSH_CACHE); | |
| synchronizecmd->cid = cpu_to_le32(cid); | |
| synchronizecmd->count = | |
| cpu_to_le32(sizeof(((struct aac_synchronize_reply *)NULL)->data)); | |
| /* | |
| * Now send the Fib to the adapter | |
| */ | |
| status = aac_fib_send(ContainerCommand, | |
| cmd_fibcontext, | |
| sizeof(struct aac_synchronize), | |
| FsaNormal, | |
| 0, 1, | |
| (fib_callback)synchronize_callback, | |
| (void *)scsicmd); | |
| /* | |
| * Check that the command queued to the controller | |
| */ | |
| if (status == -EINPROGRESS) { | |
| scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | |
| return 0; | |
| } | |
| printk(KERN_WARNING | |
| "aac_synchronize: aac_fib_send failed with status: %d.\n", status); | |
| aac_fib_complete(cmd_fibcontext); | |
| aac_fib_free(cmd_fibcontext); | |
| return SCSI_MLQUEUE_HOST_BUSY; | |
| } | |
| /** | |
| * aac_scsi_cmd() - Process SCSI command | |
| * @scsicmd: SCSI command block | |
| * | |
| * Emulate a SCSI command and queue the required request for the | |
| * aacraid firmware. | |
| */ | |
| int aac_scsi_cmd(struct scsi_cmnd * scsicmd) | |
| { | |
| u32 cid = 0; | |
| struct Scsi_Host *host = scsicmd->device->host; | |
| struct aac_dev *dev = (struct aac_dev *)host->hostdata; | |
| struct fsa_dev_info *fsa_dev_ptr = dev->fsa_dev; | |
| if (fsa_dev_ptr == NULL) | |
| return -1; | |
| /* | |
| * If the bus, id or lun is out of range, return fail | |
| * Test does not apply to ID 16, the pseudo id for the controller | |
| * itself. | |
| */ | |
| if (scmd_id(scsicmd) != host->this_id) { | |
| if ((scmd_channel(scsicmd) == CONTAINER_CHANNEL)) { | |
| if((scmd_id(scsicmd) >= dev->maximum_num_containers) || | |
| (scsicmd->device->lun != 0)) { | |
| scsicmd->result = DID_NO_CONNECT << 16; | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| } | |
| cid = scmd_id(scsicmd); | |
| /* | |
| * If the target container doesn't exist, it may have | |
| * been newly created | |
| */ | |
| if ((fsa_dev_ptr[cid].valid & 1) == 0) { | |
| switch (scsicmd->cmnd[0]) { | |
| case SERVICE_ACTION_IN: | |
| if (!(dev->raw_io_interface) || | |
| !(dev->raw_io_64) || | |
| ((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16)) | |
| break; | |
| case INQUIRY: | |
| case READ_CAPACITY: | |
| case TEST_UNIT_READY: | |
| if (dev->in_reset) | |
| return -1; | |
| spin_unlock_irq(host->host_lock); | |
| aac_probe_container(dev, cid); | |
| if ((fsa_dev_ptr[cid].valid & 1) == 0) | |
| fsa_dev_ptr[cid].valid = 0; | |
| spin_lock_irq(host->host_lock); | |
| if (fsa_dev_ptr[cid].valid == 0) { | |
| scsicmd->result = DID_NO_CONNECT << 16; | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| } | |
| default: | |
| break; | |
| } | |
| } | |
| /* | |
| * If the target container still doesn't exist, | |
| * return failure | |
| */ | |
| if (fsa_dev_ptr[cid].valid == 0) { | |
| scsicmd->result = DID_BAD_TARGET << 16; | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| } | |
| } else { /* check for physical non-dasd devices */ | |
| if ((dev->nondasd_support == 1) || expose_physicals) { | |
| if (dev->in_reset) | |
| return -1; | |
| return aac_send_srb_fib(scsicmd); | |
| } else { | |
| scsicmd->result = DID_NO_CONNECT << 16; | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| } | |
| } | |
| } | |
| /* | |
| * else Command for the controller itself | |
| */ | |
| else if ((scsicmd->cmnd[0] != INQUIRY) && /* only INQUIRY & TUR cmnd supported for controller */ | |
| (scsicmd->cmnd[0] != TEST_UNIT_READY)) | |
| { | |
| dprintk((KERN_WARNING "Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd->cmnd[0])); | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; | |
| set_sense((u8 *) &dev->fsa_dev[cid].sense_data, | |
| ILLEGAL_REQUEST, | |
| SENCODE_INVALID_COMMAND, | |
| ASENCODE_INVALID_COMMAND, 0, 0, 0, 0); | |
| memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | |
| (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer)) | |
| ? sizeof(scsicmd->sense_buffer) | |
| : sizeof(dev->fsa_dev[cid].sense_data)); | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| } | |
| /* Handle commands here that don't really require going out to the adapter */ | |
| switch (scsicmd->cmnd[0]) { | |
| case INQUIRY: | |
| { | |
| struct inquiry_data inq_data; | |
| dprintk((KERN_DEBUG "INQUIRY command, ID: %d.\n", scmd_id(scsicmd))); | |
| memset(&inq_data, 0, sizeof (struct inquiry_data)); | |
| inq_data.inqd_ver = 2; /* claim compliance to SCSI-2 */ | |
| inq_data.inqd_rdf = 2; /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */ | |
| inq_data.inqd_len = 31; | |
| /*Format for "pad2" is RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */ | |
| inq_data.inqd_pad2= 0x32 ; /*WBus16|Sync|CmdQue */ | |
| /* | |
| * Set the Vendor, Product, and Revision Level | |
| * see: <vendor>.c i.e. aac.c | |
| */ | |
| if (scmd_id(scsicmd) == host->this_id) { | |
| setinqstr(dev, (void *) (inq_data.inqd_vid), ARRAY_SIZE(container_types)); | |
| inq_data.inqd_pdt = INQD_PDT_PROC; /* Processor device */ | |
| aac_internal_transfer(scsicmd, &inq_data, 0, sizeof(inq_data)); | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| } | |
| if (dev->in_reset) | |
| return -1; | |
| setinqstr(dev, (void *) (inq_data.inqd_vid), fsa_dev_ptr[cid].type); | |
| inq_data.inqd_pdt = INQD_PDT_DA; /* Direct/random access device */ | |
| aac_internal_transfer(scsicmd, &inq_data, 0, sizeof(inq_data)); | |
| return aac_get_container_name(scsicmd, cid); | |
| } | |
| case SERVICE_ACTION_IN: | |
| if (!(dev->raw_io_interface) || | |
| !(dev->raw_io_64) || | |
| ((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16)) | |
| break; | |
| { | |
| u64 capacity; | |
| char cp[13]; | |
| dprintk((KERN_DEBUG "READ CAPACITY_16 command.\n")); | |
| capacity = fsa_dev_ptr[cid].size - 1; | |
| cp[0] = (capacity >> 56) & 0xff; | |
| cp[1] = (capacity >> 48) & 0xff; | |
| cp[2] = (capacity >> 40) & 0xff; | |
| cp[3] = (capacity >> 32) & 0xff; | |
| cp[4] = (capacity >> 24) & 0xff; | |
| cp[5] = (capacity >> 16) & 0xff; | |
| cp[6] = (capacity >> 8) & 0xff; | |
| cp[7] = (capacity >> 0) & 0xff; | |
| cp[8] = 0; | |
| cp[9] = 0; | |
| cp[10] = 2; | |
| cp[11] = 0; | |
| cp[12] = 0; | |
| aac_internal_transfer(scsicmd, cp, 0, | |
| min_t(size_t, scsicmd->cmnd[13], sizeof(cp))); | |
| if (sizeof(cp) < scsicmd->cmnd[13]) { | |
| unsigned int len, offset = sizeof(cp); | |
| memset(cp, 0, offset); | |
| do { | |
| len = min_t(size_t, scsicmd->cmnd[13] - offset, | |
| sizeof(cp)); | |
| aac_internal_transfer(scsicmd, cp, offset, len); | |
| } while ((offset += len) < scsicmd->cmnd[13]); | |
| } | |
| /* Do not cache partition table for arrays */ | |
| scsicmd->device->removable = 1; | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| } | |
| case READ_CAPACITY: | |
| { | |
| u32 capacity; | |
| char cp[8]; | |
| dprintk((KERN_DEBUG "READ CAPACITY command.\n")); | |
| if (fsa_dev_ptr[cid].size <= 0x100000000ULL) | |
| capacity = fsa_dev_ptr[cid].size - 1; | |
| else | |
| capacity = (u32)-1; | |
| cp[0] = (capacity >> 24) & 0xff; | |
| cp[1] = (capacity >> 16) & 0xff; | |
| cp[2] = (capacity >> 8) & 0xff; | |
| cp[3] = (capacity >> 0) & 0xff; | |
| cp[4] = 0; | |
| cp[5] = 0; | |
| cp[6] = 2; | |
| cp[7] = 0; | |
| aac_internal_transfer(scsicmd, cp, 0, sizeof(cp)); | |
| /* Do not cache partition table for arrays */ | |
| scsicmd->device->removable = 1; | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| } | |
| case MODE_SENSE: | |
| { | |
| char mode_buf[4]; | |
| dprintk((KERN_DEBUG "MODE SENSE command.\n")); | |
| mode_buf[0] = 3; /* Mode data length */ | |
| mode_buf[1] = 0; /* Medium type - default */ | |
| mode_buf[2] = 0; /* Device-specific param, bit 8: 0/1 = write enabled/protected */ | |
| mode_buf[3] = 0; /* Block descriptor length */ | |
| aac_internal_transfer(scsicmd, mode_buf, 0, sizeof(mode_buf)); | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| } | |
| case MODE_SENSE_10: | |
| { | |
| char mode_buf[8]; | |
| dprintk((KERN_DEBUG "MODE SENSE 10 byte command.\n")); | |
| mode_buf[0] = 0; /* Mode data length (MSB) */ | |
| mode_buf[1] = 6; /* Mode data length (LSB) */ | |
| mode_buf[2] = 0; /* Medium type - default */ | |
| mode_buf[3] = 0; /* Device-specific param, bit 8: 0/1 = write enabled/protected */ | |
| mode_buf[4] = 0; /* reserved */ | |
| mode_buf[5] = 0; /* reserved */ | |
| mode_buf[6] = 0; /* Block descriptor length (MSB) */ | |
| mode_buf[7] = 0; /* Block descriptor length (LSB) */ | |
| aac_internal_transfer(scsicmd, mode_buf, 0, sizeof(mode_buf)); | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| } | |
| case REQUEST_SENSE: | |
| dprintk((KERN_DEBUG "REQUEST SENSE command.\n")); | |
| memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, sizeof (struct sense_data)); | |
| memset(&dev->fsa_dev[cid].sense_data, 0, sizeof (struct sense_data)); | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| case ALLOW_MEDIUM_REMOVAL: | |
| dprintk((KERN_DEBUG "LOCK command.\n")); | |
| if (scsicmd->cmnd[4]) | |
| fsa_dev_ptr[cid].locked = 1; | |
| else | |
| fsa_dev_ptr[cid].locked = 0; | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| /* | |
| * These commands are all No-Ops | |
| */ | |
| case TEST_UNIT_READY: | |
| case RESERVE: | |
| case RELEASE: | |
| case REZERO_UNIT: | |
| case REASSIGN_BLOCKS: | |
| case SEEK_10: | |
| case START_STOP: | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| } | |
| switch (scsicmd->cmnd[0]) | |
| { | |
| case READ_6: | |
| case READ_10: | |
| case READ_12: | |
| case READ_16: | |
| if (dev->in_reset) | |
| return -1; | |
| /* | |
| * Hack to keep track of ordinal number of the device that | |
| * corresponds to a container. Needed to convert | |
| * containers to /dev/sd device names | |
| */ | |
| if (scsicmd->request->rq_disk) | |
| strlcpy(fsa_dev_ptr[cid].devname, | |
| scsicmd->request->rq_disk->disk_name, | |
| min(sizeof(fsa_dev_ptr[cid].devname), | |
| sizeof(scsicmd->request->rq_disk->disk_name) + 1)); | |
| return aac_read(scsicmd, cid); | |
| case WRITE_6: | |
| case WRITE_10: | |
| case WRITE_12: | |
| case WRITE_16: | |
| if (dev->in_reset) | |
| return -1; | |
| return aac_write(scsicmd, cid); | |
| case SYNCHRONIZE_CACHE: | |
| /* Issue FIB to tell Firmware to flush it's cache */ | |
| return aac_synchronize(scsicmd, cid); | |
| default: | |
| /* | |
| * Unhandled commands | |
| */ | |
| dprintk((KERN_WARNING "Unhandled SCSI Command: 0x%x.\n", scsicmd->cmnd[0])); | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; | |
| set_sense((u8 *) &dev->fsa_dev[cid].sense_data, | |
| ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND, | |
| ASENCODE_INVALID_COMMAND, 0, 0, 0, 0); | |
| memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, | |
| (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer)) | |
| ? sizeof(scsicmd->sense_buffer) | |
| : sizeof(dev->fsa_dev[cid].sense_data)); | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| } | |
| } | |
| static int query_disk(struct aac_dev *dev, void __user *arg) | |
| { | |
| struct aac_query_disk qd; | |
| struct fsa_dev_info *fsa_dev_ptr; | |
| fsa_dev_ptr = dev->fsa_dev; | |
| if (!fsa_dev_ptr) | |
| return -EBUSY; | |
| if (copy_from_user(&qd, arg, sizeof (struct aac_query_disk))) | |
| return -EFAULT; | |
| if (qd.cnum == -1) | |
| qd.cnum = qd.id; | |
| else if ((qd.bus == -1) && (qd.id == -1) && (qd.lun == -1)) | |
| { | |
| if (qd.cnum < 0 || qd.cnum >= dev->maximum_num_containers) | |
| return -EINVAL; | |
| qd.instance = dev->scsi_host_ptr->host_no; | |
| qd.bus = 0; | |
| qd.id = CONTAINER_TO_ID(qd.cnum); | |
| qd.lun = CONTAINER_TO_LUN(qd.cnum); | |
| } | |
| else return -EINVAL; | |
| qd.valid = fsa_dev_ptr[qd.cnum].valid; | |
| qd.locked = fsa_dev_ptr[qd.cnum].locked; | |
| qd.deleted = fsa_dev_ptr[qd.cnum].deleted; | |
| if (fsa_dev_ptr[qd.cnum].devname[0] == '\0') | |
| qd.unmapped = 1; | |
| else | |
| qd.unmapped = 0; | |
| strlcpy(qd.name, fsa_dev_ptr[qd.cnum].devname, | |
| min(sizeof(qd.name), sizeof(fsa_dev_ptr[qd.cnum].devname) + 1)); | |
| if (copy_to_user(arg, &qd, sizeof (struct aac_query_disk))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| static int force_delete_disk(struct aac_dev *dev, void __user *arg) | |
| { | |
| struct aac_delete_disk dd; | |
| struct fsa_dev_info *fsa_dev_ptr; | |
| fsa_dev_ptr = dev->fsa_dev; | |
| if (!fsa_dev_ptr) | |
| return -EBUSY; | |
| if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk))) | |
| return -EFAULT; | |
| if (dd.cnum >= dev->maximum_num_containers) | |
| return -EINVAL; | |
| /* | |
| * Mark this container as being deleted. | |
| */ | |
| fsa_dev_ptr[dd.cnum].deleted = 1; | |
| /* | |
| * Mark the container as no longer valid | |
| */ | |
| fsa_dev_ptr[dd.cnum].valid = 0; | |
| return 0; | |
| } | |
| static int delete_disk(struct aac_dev *dev, void __user *arg) | |
| { | |
| struct aac_delete_disk dd; | |
| struct fsa_dev_info *fsa_dev_ptr; | |
| fsa_dev_ptr = dev->fsa_dev; | |
| if (!fsa_dev_ptr) | |
| return -EBUSY; | |
| if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk))) | |
| return -EFAULT; | |
| if (dd.cnum >= dev->maximum_num_containers) | |
| return -EINVAL; | |
| /* | |
| * If the container is locked, it can not be deleted by the API. | |
| */ | |
| if (fsa_dev_ptr[dd.cnum].locked) | |
| return -EBUSY; | |
| else { | |
| /* | |
| * Mark the container as no longer being valid. | |
| */ | |
| fsa_dev_ptr[dd.cnum].valid = 0; | |
| fsa_dev_ptr[dd.cnum].devname[0] = '\0'; | |
| return 0; | |
| } | |
| } | |
| int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg) | |
| { | |
| switch (cmd) { | |
| case FSACTL_QUERY_DISK: | |
| return query_disk(dev, arg); | |
| case FSACTL_DELETE_DISK: | |
| return delete_disk(dev, arg); | |
| case FSACTL_FORCE_DELETE_DISK: | |
| return force_delete_disk(dev, arg); | |
| case FSACTL_GET_CONTAINERS: | |
| return aac_get_containers(dev); | |
| default: | |
| return -ENOTTY; | |
| } | |
| } | |
| /** | |
| * | |
| * aac_srb_callback | |
| * @context: the context set in the fib - here it is scsi cmd | |
| * @fibptr: pointer to the fib | |
| * | |
| * Handles the completion of a scsi command to a non dasd device | |
| * | |
| */ | |
| static void aac_srb_callback(void *context, struct fib * fibptr) | |
| { | |
| struct aac_dev *dev; | |
| struct aac_srb_reply *srbreply; | |
| struct scsi_cmnd *scsicmd; | |
| scsicmd = (struct scsi_cmnd *) context; | |
| scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL; | |
| dev = (struct aac_dev *)scsicmd->device->host->hostdata; | |
| BUG_ON(fibptr == NULL); | |
| srbreply = (struct aac_srb_reply *) fib_data(fibptr); | |
| scsicmd->sense_buffer[0] = '\0'; /* Initialize sense valid flag to false */ | |
| /* | |
| * Calculate resid for sg | |
| */ | |
| scsicmd->resid = scsicmd->request_bufflen - | |
| le32_to_cpu(srbreply->data_xfer_length); | |
| if(scsicmd->use_sg) | |
| pci_unmap_sg(dev->pdev, | |
| (struct scatterlist *)scsicmd->request_buffer, | |
| scsicmd->use_sg, | |
| scsicmd->sc_data_direction); | |
| else if(scsicmd->request_bufflen) | |
| pci_unmap_single(dev->pdev, scsicmd->SCp.dma_handle, scsicmd->request_bufflen, | |
| scsicmd->sc_data_direction); | |
| /* | |
| * First check the fib status | |
| */ | |
| if (le32_to_cpu(srbreply->status) != ST_OK){ | |
| int len; | |
| printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status)); | |
| len = (le32_to_cpu(srbreply->sense_data_size) > | |
| sizeof(scsicmd->sense_buffer)) ? | |
| sizeof(scsicmd->sense_buffer) : | |
| le32_to_cpu(srbreply->sense_data_size); | |
| scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; | |
| memcpy(scsicmd->sense_buffer, srbreply->sense_data, len); | |
| } | |
| /* | |
| * Next check the srb status | |
| */ | |
| switch( (le32_to_cpu(srbreply->srb_status))&0x3f){ | |
| case SRB_STATUS_ERROR_RECOVERY: | |
| case SRB_STATUS_PENDING: | |
| case SRB_STATUS_SUCCESS: | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8; | |
| break; | |
| case SRB_STATUS_DATA_OVERRUN: | |
| switch(scsicmd->cmnd[0]){ | |
| case READ_6: | |
| case WRITE_6: | |
| case READ_10: | |
| case WRITE_10: | |
| case READ_12: | |
| case WRITE_12: | |
| case READ_16: | |
| case WRITE_16: | |
| if(le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow ) { | |
| printk(KERN_WARNING"aacraid: SCSI CMD underflow\n"); | |
| } else { | |
| printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n"); | |
| } | |
| scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8; | |
| break; | |
| case INQUIRY: { | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8; | |
| break; | |
| } | |
| default: | |
| scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8; | |
| break; | |
| } | |
| break; | |
| case SRB_STATUS_ABORTED: | |
| scsicmd->result = DID_ABORT << 16 | ABORT << 8; | |
| break; | |
| case SRB_STATUS_ABORT_FAILED: | |
| // Not sure about this one - but assuming the hba was trying to abort for some reason | |
| scsicmd->result = DID_ERROR << 16 | ABORT << 8; | |
| break; | |
| case SRB_STATUS_PARITY_ERROR: | |
| scsicmd->result = DID_PARITY << 16 | MSG_PARITY_ERROR << 8; | |
| break; | |
| case SRB_STATUS_NO_DEVICE: | |
| case SRB_STATUS_INVALID_PATH_ID: | |
| case SRB_STATUS_INVALID_TARGET_ID: | |
| case SRB_STATUS_INVALID_LUN: | |
| case SRB_STATUS_SELECTION_TIMEOUT: | |
| scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8; | |
| break; | |
| case SRB_STATUS_COMMAND_TIMEOUT: | |
| case SRB_STATUS_TIMEOUT: | |
| scsicmd->result = DID_TIME_OUT << 16 | COMMAND_COMPLETE << 8; | |
| break; | |
| case SRB_STATUS_BUSY: | |
| scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8; | |
| break; | |
| case SRB_STATUS_BUS_RESET: | |
| scsicmd->result = DID_RESET << 16 | COMMAND_COMPLETE << 8; | |
| break; | |
| case SRB_STATUS_MESSAGE_REJECTED: | |
| scsicmd->result = DID_ERROR << 16 | MESSAGE_REJECT << 8; | |
| break; | |
| case SRB_STATUS_REQUEST_FLUSHED: | |
| case SRB_STATUS_ERROR: | |
| case SRB_STATUS_INVALID_REQUEST: | |
| case SRB_STATUS_REQUEST_SENSE_FAILED: | |
| case SRB_STATUS_NO_HBA: | |
| case SRB_STATUS_UNEXPECTED_BUS_FREE: | |
| case SRB_STATUS_PHASE_SEQUENCE_FAILURE: | |
| case SRB_STATUS_BAD_SRB_BLOCK_LENGTH: | |
| case SRB_STATUS_DELAYED_RETRY: | |
| case SRB_STATUS_BAD_FUNCTION: | |
| case SRB_STATUS_NOT_STARTED: | |
| case SRB_STATUS_NOT_IN_USE: | |
| case SRB_STATUS_FORCE_ABORT: | |
| case SRB_STATUS_DOMAIN_VALIDATION_FAIL: | |
| default: | |
| #ifdef AAC_DETAILED_STATUS_INFO | |
| printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n", | |
| le32_to_cpu(srbreply->srb_status) & 0x3F, | |
| aac_get_status_string( | |
| le32_to_cpu(srbreply->srb_status) & 0x3F), | |
| scsicmd->cmnd[0], | |
| le32_to_cpu(srbreply->scsi_status)); | |
| #endif | |
| scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8; | |
| break; | |
| } | |
| if (le32_to_cpu(srbreply->scsi_status) == 0x02 ){ // Check Condition | |
| int len; | |
| scsicmd->result |= SAM_STAT_CHECK_CONDITION; | |
| len = (le32_to_cpu(srbreply->sense_data_size) > | |
| sizeof(scsicmd->sense_buffer)) ? | |
| sizeof(scsicmd->sense_buffer) : | |
| le32_to_cpu(srbreply->sense_data_size); | |
| #ifdef AAC_DETAILED_STATUS_INFO | |
| printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n", | |
| le32_to_cpu(srbreply->status), len); | |
| #endif | |
| memcpy(scsicmd->sense_buffer, srbreply->sense_data, len); | |
| } | |
| /* | |
| * OR in the scsi status (already shifted up a bit) | |
| */ | |
| scsicmd->result |= le32_to_cpu(srbreply->scsi_status); | |
| aac_fib_complete(fibptr); | |
| aac_fib_free(fibptr); | |
| scsicmd->scsi_done(scsicmd); | |
| } | |
| /** | |
| * | |
| * aac_send_scb_fib | |
| * @scsicmd: the scsi command block | |
| * | |
| * This routine will form a FIB and fill in the aac_srb from the | |
| * scsicmd passed in. | |
| */ | |
| static int aac_send_srb_fib(struct scsi_cmnd* scsicmd) | |
| { | |
| struct fib* cmd_fibcontext; | |
| struct aac_dev* dev; | |
| int status; | |
| struct aac_srb *srbcmd; | |
| u16 fibsize; | |
| u32 flag; | |
| u32 timeout; | |
| dev = (struct aac_dev *)scsicmd->device->host->hostdata; | |
| if (scmd_id(scsicmd) >= dev->maximum_num_physicals || | |
| scsicmd->device->lun > 7) { | |
| scsicmd->result = DID_NO_CONNECT << 16; | |
| scsicmd->scsi_done(scsicmd); | |
| return 0; | |
| } | |
| switch(scsicmd->sc_data_direction){ | |
| case DMA_TO_DEVICE: | |
| flag = SRB_DataOut; | |
| break; | |
| case DMA_BIDIRECTIONAL: | |
| flag = SRB_DataIn | SRB_DataOut; | |
| break; | |
| case DMA_FROM_DEVICE: | |
| flag = SRB_DataIn; | |
| break; | |
| case DMA_NONE: | |
| default: /* shuts up some versions of gcc */ | |
| flag = SRB_NoDataXfer; | |
| break; | |
| } | |
| /* | |
| * Allocate and initialize a Fib then setup a BlockWrite command | |
| */ | |
| if (!(cmd_fibcontext = aac_fib_alloc(dev))) { | |
| return -1; | |
| } | |
| aac_fib_init(cmd_fibcontext); | |
| srbcmd = (struct aac_srb*) fib_data(cmd_fibcontext); | |
| srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi); | |
| srbcmd->channel = cpu_to_le32(aac_logical_to_phys(scmd_channel(scsicmd))); | |
| srbcmd->id = cpu_to_le32(scmd_id(scsicmd)); | |
| srbcmd->lun = cpu_to_le32(scsicmd->device->lun); | |
| srbcmd->flags = cpu_to_le32(flag); | |
| timeout = scsicmd->timeout_per_command/HZ; | |
| if(timeout == 0){ | |
| timeout = 1; | |
| } | |
| srbcmd->timeout = cpu_to_le32(timeout); // timeout in seconds | |
| srbcmd->retry_limit = 0; /* Obsolete parameter */ | |
| srbcmd->cdb_size = cpu_to_le32(scsicmd->cmd_len); | |
| if( dev->dac_support == 1 ) { | |
| aac_build_sg64(scsicmd, (struct sgmap64*) &srbcmd->sg); | |
| srbcmd->count = cpu_to_le32(scsicmd->request_bufflen); | |
| memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb)); | |
| memcpy(srbcmd->cdb, scsicmd->cmnd, scsicmd->cmd_len); | |
| /* | |
| * Build Scatter/Gather list | |
| */ | |
| fibsize = sizeof (struct aac_srb) - sizeof (struct sgentry) + | |
| ((le32_to_cpu(srbcmd->sg.count) & 0xff) * | |
| sizeof (struct sgentry64)); | |
| BUG_ON (fibsize > (dev->max_fib_size - | |
| sizeof(struct aac_fibhdr))); | |
| /* | |
| * Now send the Fib to the adapter | |
| */ | |
| status = aac_fib_send(ScsiPortCommand64, cmd_fibcontext, | |
| fibsize, FsaNormal, 0, 1, | |
| (fib_callback) aac_srb_callback, | |
| (void *) scsicmd); | |
| } else { | |
| aac_build_sg(scsicmd, (struct sgmap*)&srbcmd->sg); | |
| srbcmd->count = cpu_to_le32(scsicmd->request_bufflen); | |
| memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb)); | |
| memcpy(srbcmd->cdb, scsicmd->cmnd, scsicmd->cmd_len); | |
| /* | |
| * Build Scatter/Gather list | |
| */ | |
| fibsize = sizeof (struct aac_srb) + | |
| (((le32_to_cpu(srbcmd->sg.count) & 0xff) - 1) * | |
| sizeof (struct sgentry)); | |
| BUG_ON (fibsize > (dev->max_fib_size - | |
| sizeof(struct aac_fibhdr))); | |
| /* | |
| * Now send the Fib to the adapter | |
| */ | |
| status = aac_fib_send(ScsiPortCommand, cmd_fibcontext, fibsize, FsaNormal, 0, 1, | |
| (fib_callback) aac_srb_callback, (void *) scsicmd); | |
| } | |
| /* | |
| * Check that the command queued to the controller | |
| */ | |
| if (status == -EINPROGRESS) { | |
| scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; | |
| return 0; | |
| } | |
| printk(KERN_WARNING "aac_srb: aac_fib_send failed with status: %d\n", status); | |
| aac_fib_complete(cmd_fibcontext); | |
| aac_fib_free(cmd_fibcontext); | |
| return -1; | |
| } | |
| static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* psg) | |
| { | |
| struct aac_dev *dev; | |
| unsigned long byte_count = 0; | |
| dev = (struct aac_dev *)scsicmd->device->host->hostdata; | |
| // Get rid of old data | |
| psg->count = 0; | |
| psg->sg[0].addr = 0; | |
| psg->sg[0].count = 0; | |
| if (scsicmd->use_sg) { | |
| struct scatterlist *sg; | |
| int i; | |
| int sg_count; | |
| sg = (struct scatterlist *) scsicmd->request_buffer; | |
| sg_count = pci_map_sg(dev->pdev, sg, scsicmd->use_sg, | |
| scsicmd->sc_data_direction); | |
| psg->count = cpu_to_le32(sg_count); | |
| for (i = 0; i < sg_count; i++) { | |
| psg->sg[i].addr = cpu_to_le32(sg_dma_address(sg)); | |
| psg->sg[i].count = cpu_to_le32(sg_dma_len(sg)); | |
| byte_count += sg_dma_len(sg); | |
| sg++; | |
| } | |
| /* hba wants the size to be exact */ | |
| if(byte_count > scsicmd->request_bufflen){ | |
| u32 temp = le32_to_cpu(psg->sg[i-1].count) - | |
| (byte_count - scsicmd->request_bufflen); | |
| psg->sg[i-1].count = cpu_to_le32(temp); | |
| byte_count = scsicmd->request_bufflen; | |
| } | |
| /* Check for command underflow */ | |
| if(scsicmd->underflow && (byte_count < scsicmd->underflow)){ | |
| printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n", | |
| byte_count, scsicmd->underflow); | |
| } | |
| } | |
| else if(scsicmd->request_bufflen) { | |
| u32 addr; | |
| scsicmd->SCp.dma_handle = pci_map_single(dev->pdev, | |
| scsicmd->request_buffer, | |
| scsicmd->request_bufflen, | |
| scsicmd->sc_data_direction); | |
| addr = scsicmd->SCp.dma_handle; | |
| psg->count = cpu_to_le32(1); | |
| psg->sg[0].addr = cpu_to_le32(addr); | |
| psg->sg[0].count = cpu_to_le32(scsicmd->request_bufflen); | |
| byte_count = scsicmd->request_bufflen; | |
| } | |
| return byte_count; | |
| } | |
| static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg) | |
| { | |
| struct aac_dev *dev; | |
| unsigned long byte_count = 0; | |
| u64 addr; | |
| dev = (struct aac_dev *)scsicmd->device->host->hostdata; | |
| // Get rid of old data | |
| psg->count = 0; | |
| psg->sg[0].addr[0] = 0; | |
| psg->sg[0].addr[1] = 0; | |
| psg->sg[0].count = 0; | |
| if (scsicmd->use_sg) { | |
| struct scatterlist *sg; | |
| int i; | |
| int sg_count; | |
| sg = (struct scatterlist *) scsicmd->request_buffer; | |
| sg_count = pci_map_sg(dev->pdev, sg, scsicmd->use_sg, | |
| scsicmd->sc_data_direction); | |
| for (i = 0; i < sg_count; i++) { | |
| int count = sg_dma_len(sg); | |
| addr = sg_dma_address(sg); | |
| psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff); | |
| psg->sg[i].addr[1] = cpu_to_le32(addr>>32); | |
| psg->sg[i].count = cpu_to_le32(count); | |
| byte_count += count; | |
| sg++; | |
| } | |
| psg->count = cpu_to_le32(sg_count); | |
| /* hba wants the size to be exact */ | |
| if(byte_count > scsicmd->request_bufflen){ | |
| u32 temp = le32_to_cpu(psg->sg[i-1].count) - | |
| (byte_count - scsicmd->request_bufflen); | |
| psg->sg[i-1].count = cpu_to_le32(temp); | |
| byte_count = scsicmd->request_bufflen; | |
| } | |
| /* Check for command underflow */ | |
| if(scsicmd->underflow && (byte_count < scsicmd->underflow)){ | |
| printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n", | |
| byte_count, scsicmd->underflow); | |
| } | |
| } | |
| else if(scsicmd->request_bufflen) { | |
| scsicmd->SCp.dma_handle = pci_map_single(dev->pdev, | |
| scsicmd->request_buffer, | |
| scsicmd->request_bufflen, | |
| scsicmd->sc_data_direction); | |
| addr = scsicmd->SCp.dma_handle; | |
| psg->count = cpu_to_le32(1); | |
| psg->sg[0].addr[0] = cpu_to_le32(addr & 0xffffffff); | |
| psg->sg[0].addr[1] = cpu_to_le32(addr >> 32); | |
| psg->sg[0].count = cpu_to_le32(scsicmd->request_bufflen); | |
| byte_count = scsicmd->request_bufflen; | |
| } | |
| return byte_count; | |
| } | |
| static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg) | |
| { | |
| struct Scsi_Host *host = scsicmd->device->host; | |
| struct aac_dev *dev = (struct aac_dev *)host->hostdata; | |
| unsigned long byte_count = 0; | |
| // Get rid of old data | |
| psg->count = 0; | |
| psg->sg[0].next = 0; | |
| psg->sg[0].prev = 0; | |
| psg->sg[0].addr[0] = 0; | |
| psg->sg[0].addr[1] = 0; | |
| psg->sg[0].count = 0; | |
| psg->sg[0].flags = 0; | |
| if (scsicmd->use_sg) { | |
| struct scatterlist *sg; | |
| int i; | |
| int sg_count; | |
| sg = (struct scatterlist *) scsicmd->request_buffer; | |
| sg_count = pci_map_sg(dev->pdev, sg, scsicmd->use_sg, | |
| scsicmd->sc_data_direction); | |
| for (i = 0; i < sg_count; i++) { | |
| int count = sg_dma_len(sg); | |
| u64 addr = sg_dma_address(sg); | |
| psg->sg[i].next = 0; | |
| psg->sg[i].prev = 0; | |
| psg->sg[i].addr[1] = cpu_to_le32((u32)(addr>>32)); | |
| psg->sg[i].addr[0] = cpu_to_le32((u32)(addr & 0xffffffff)); | |
| psg->sg[i].count = cpu_to_le32(count); | |
| psg->sg[i].flags = 0; | |
| byte_count += count; | |
| sg++; | |
| } | |
| psg->count = cpu_to_le32(sg_count); | |
| /* hba wants the size to be exact */ | |
| if(byte_count > scsicmd->request_bufflen){ | |
| u32 temp = le32_to_cpu(psg->sg[i-1].count) - | |
| (byte_count - scsicmd->request_bufflen); | |
| psg->sg[i-1].count = cpu_to_le32(temp); | |
| byte_count = scsicmd->request_bufflen; | |
| } | |
| /* Check for command underflow */ | |
| if(scsicmd->underflow && (byte_count < scsicmd->underflow)){ | |
| printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n", | |
| byte_count, scsicmd->underflow); | |
| } | |
| } | |
| else if(scsicmd->request_bufflen) { | |
| int count; | |
| u64 addr; | |
| scsicmd->SCp.dma_handle = pci_map_single(dev->pdev, | |
| scsicmd->request_buffer, | |
| scsicmd->request_bufflen, | |
| scsicmd->sc_data_direction); | |
| addr = scsicmd->SCp.dma_handle; | |
| count = scsicmd->request_bufflen; | |
| psg->count = cpu_to_le32(1); | |
| psg->sg[0].next = 0; | |
| psg->sg[0].prev = 0; | |
| psg->sg[0].addr[1] = cpu_to_le32((u32)(addr>>32)); | |
| psg->sg[0].addr[0] = cpu_to_le32((u32)(addr & 0xffffffff)); | |
| psg->sg[0].count = cpu_to_le32(count); | |
| psg->sg[0].flags = 0; | |
| byte_count = scsicmd->request_bufflen; | |
| } | |
| return byte_count; | |
| } | |
| #ifdef AAC_DETAILED_STATUS_INFO | |
| struct aac_srb_status_info { | |
| u32 status; | |
| char *str; | |
| }; | |
| static struct aac_srb_status_info srb_status_info[] = { | |
| { SRB_STATUS_PENDING, "Pending Status"}, | |
| { SRB_STATUS_SUCCESS, "Success"}, | |
| { SRB_STATUS_ABORTED, "Aborted Command"}, | |
| { SRB_STATUS_ABORT_FAILED, "Abort Failed"}, | |
| { SRB_STATUS_ERROR, "Error Event"}, | |
| { SRB_STATUS_BUSY, "Device Busy"}, | |
| { SRB_STATUS_INVALID_REQUEST, "Invalid Request"}, | |
| { SRB_STATUS_INVALID_PATH_ID, "Invalid Path ID"}, | |
| { SRB_STATUS_NO_DEVICE, "No Device"}, | |
| { SRB_STATUS_TIMEOUT, "Timeout"}, | |
| { SRB_STATUS_SELECTION_TIMEOUT, "Selection Timeout"}, | |
| { SRB_STATUS_COMMAND_TIMEOUT, "Command Timeout"}, | |
| { SRB_STATUS_MESSAGE_REJECTED, "Message Rejected"}, | |
| { SRB_STATUS_BUS_RESET, "Bus Reset"}, | |
| { SRB_STATUS_PARITY_ERROR, "Parity Error"}, | |
| { SRB_STATUS_REQUEST_SENSE_FAILED,"Request Sense Failed"}, | |
| { SRB_STATUS_NO_HBA, "No HBA"}, | |
| { SRB_STATUS_DATA_OVERRUN, "Data Overrun/Data Underrun"}, | |
| { SRB_STATUS_UNEXPECTED_BUS_FREE,"Unexpected Bus Free"}, | |
| { SRB_STATUS_PHASE_SEQUENCE_FAILURE,"Phase Error"}, | |
| { SRB_STATUS_BAD_SRB_BLOCK_LENGTH,"Bad Srb Block Length"}, | |
| { SRB_STATUS_REQUEST_FLUSHED, "Request Flushed"}, | |
| { SRB_STATUS_DELAYED_RETRY, "Delayed Retry"}, | |
| { SRB_STATUS_INVALID_LUN, "Invalid LUN"}, | |
| { SRB_STATUS_INVALID_TARGET_ID, "Invalid TARGET ID"}, | |
| { SRB_STATUS_BAD_FUNCTION, "Bad Function"}, | |
| { SRB_STATUS_ERROR_RECOVERY, "Error Recovery"}, | |
| { SRB_STATUS_NOT_STARTED, "Not Started"}, | |
| { SRB_STATUS_NOT_IN_USE, "Not In Use"}, | |
| { SRB_STATUS_FORCE_ABORT, "Force Abort"}, | |
| { SRB_STATUS_DOMAIN_VALIDATION_FAIL,"Domain Validation Failure"}, | |
| { 0xff, "Unknown Error"} | |
| }; | |
| char *aac_get_status_string(u32 status) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(srb_status_info); i++) | |
| if (srb_status_info[i].status == status) | |
| return srb_status_info[i].str; | |
| return "Bad Status Code"; | |
| } | |
| #endif |