| /* | |
| * dec_esp.c: Driver for SCSI chips on IOASIC based TURBOchannel DECstations | |
| * and TURBOchannel PMAZ-A cards | |
| * | |
| * TURBOchannel changes by Harald Koerfgen | |
| * PMAZ-A support by David Airlie | |
| * | |
| * based on jazz_esp.c: | |
| * Copyright (C) 1997 Thomas Bogendoerfer (tsbogend@alpha.franken.de) | |
| * | |
| * jazz_esp is based on David S. Miller's ESP driver and cyber_esp | |
| * | |
| * 20000819 - Small PMAZ-AA fixes by Florian Lohoff <flo@rfc822.org> | |
| * Be warned the PMAZ-AA works currently as a single card. | |
| * Dont try to put multiple cards in one machine - They are | |
| * both detected but it may crash under high load garbling your | |
| * data. | |
| * 20001005 - Initialization fixes for 2.4.0-test9 | |
| * Florian Lohoff <flo@rfc822.org> | |
| * | |
| * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/delay.h> | |
| #include <linux/types.h> | |
| #include <linux/string.h> | |
| #include <linux/slab.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/stat.h> | |
| #include <asm/dma.h> | |
| #include <asm/irq.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/system.h> | |
| #include <asm/dec/interrupts.h> | |
| #include <asm/dec/ioasic.h> | |
| #include <asm/dec/ioasic_addrs.h> | |
| #include <asm/dec/ioasic_ints.h> | |
| #include <asm/dec/machtype.h> | |
| #include <asm/dec/system.h> | |
| #include <asm/dec/tc.h> | |
| #define DEC_SCSI_SREG 0 | |
| #define DEC_SCSI_DMAREG 0x40000 | |
| #define DEC_SCSI_SRAM 0x80000 | |
| #define DEC_SCSI_DIAG 0xC0000 | |
| #include "scsi.h" | |
| #include <scsi/scsi_host.h> | |
| #include "NCR53C9x.h" | |
| static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); | |
| static void dma_drain(struct NCR_ESP *esp); | |
| static int dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd *sp); | |
| static void dma_dump_state(struct NCR_ESP *esp); | |
| static void dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length); | |
| static void dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length); | |
| static void dma_ints_off(struct NCR_ESP *esp); | |
| static void dma_ints_on(struct NCR_ESP *esp); | |
| static int dma_irq_p(struct NCR_ESP *esp); | |
| static int dma_ports_p(struct NCR_ESP *esp); | |
| static void dma_setup(struct NCR_ESP *esp, u32 addr, int count, int write); | |
| static void dma_mmu_get_scsi_one(struct NCR_ESP *esp, struct scsi_cmnd * sp); | |
| static void dma_mmu_get_scsi_sgl(struct NCR_ESP *esp, struct scsi_cmnd * sp); | |
| static void dma_advance_sg(struct scsi_cmnd * sp); | |
| static void pmaz_dma_drain(struct NCR_ESP *esp); | |
| static void pmaz_dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length); | |
| static void pmaz_dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length); | |
| static void pmaz_dma_ints_off(struct NCR_ESP *esp); | |
| static void pmaz_dma_ints_on(struct NCR_ESP *esp); | |
| static void pmaz_dma_setup(struct NCR_ESP *esp, u32 addr, int count, int write); | |
| static void pmaz_dma_mmu_get_scsi_one(struct NCR_ESP *esp, struct scsi_cmnd * sp); | |
| #define TC_ESP_RAM_SIZE 0x20000 | |
| #define ESP_TGT_DMA_SIZE ((TC_ESP_RAM_SIZE/7) & ~(sizeof(int)-1)) | |
| #define ESP_NCMD 7 | |
| #define TC_ESP_DMAR_MASK 0x1ffff | |
| #define TC_ESP_DMAR_WRITE 0x80000000 | |
| #define TC_ESP_DMA_ADDR(x) ((unsigned)(x) & TC_ESP_DMAR_MASK) | |
| u32 esp_virt_buffer; | |
| int scsi_current_length; | |
| volatile unsigned char cmd_buffer[16]; | |
| volatile unsigned char pmaz_cmd_buffer[16]; | |
| /* This is where all commands are put | |
| * before they are trasfered to the ESP chip | |
| * via PIO. | |
| */ | |
| static irqreturn_t scsi_dma_merr_int(int, void *); | |
| static irqreturn_t scsi_dma_err_int(int, void *); | |
| static irqreturn_t scsi_dma_int(int, void *); | |
| static int dec_esp_detect(struct scsi_host_template * tpnt); | |
| static int dec_esp_release(struct Scsi_Host *shost) | |
| { | |
| if (shost->irq) | |
| free_irq(shost->irq, NULL); | |
| if (shost->io_port && shost->n_io_port) | |
| release_region(shost->io_port, shost->n_io_port); | |
| scsi_unregister(shost); | |
| return 0; | |
| } | |
| static struct scsi_host_template driver_template = { | |
| .proc_name = "dec_esp", | |
| .proc_info = esp_proc_info, | |
| .name = "NCR53C94", | |
| .detect = dec_esp_detect, | |
| .slave_alloc = esp_slave_alloc, | |
| .slave_destroy = esp_slave_destroy, | |
| .release = dec_esp_release, | |
| .info = esp_info, | |
| .queuecommand = esp_queue, | |
| .eh_abort_handler = esp_abort, | |
| .eh_bus_reset_handler = esp_reset, | |
| .can_queue = 7, | |
| .this_id = 7, | |
| .sg_tablesize = SG_ALL, | |
| .cmd_per_lun = 1, | |
| .use_clustering = DISABLE_CLUSTERING, | |
| }; | |
| #include "scsi_module.c" | |
| /***************************************************************** Detection */ | |
| static int dec_esp_detect(struct scsi_host_template * tpnt) | |
| { | |
| struct NCR_ESP *esp; | |
| struct ConfigDev *esp_dev; | |
| int slot; | |
| unsigned long mem_start; | |
| if (IOASIC) { | |
| esp_dev = 0; | |
| esp = esp_allocate(tpnt, (void *) esp_dev); | |
| /* Do command transfer with programmed I/O */ | |
| esp->do_pio_cmds = 1; | |
| /* Required functions */ | |
| esp->dma_bytes_sent = &dma_bytes_sent; | |
| esp->dma_can_transfer = &dma_can_transfer; | |
| esp->dma_dump_state = &dma_dump_state; | |
| esp->dma_init_read = &dma_init_read; | |
| esp->dma_init_write = &dma_init_write; | |
| esp->dma_ints_off = &dma_ints_off; | |
| esp->dma_ints_on = &dma_ints_on; | |
| esp->dma_irq_p = &dma_irq_p; | |
| esp->dma_ports_p = &dma_ports_p; | |
| esp->dma_setup = &dma_setup; | |
| /* Optional functions */ | |
| esp->dma_barrier = 0; | |
| esp->dma_drain = &dma_drain; | |
| esp->dma_invalidate = 0; | |
| esp->dma_irq_entry = 0; | |
| esp->dma_irq_exit = 0; | |
| esp->dma_poll = 0; | |
| esp->dma_reset = 0; | |
| esp->dma_led_off = 0; | |
| esp->dma_led_on = 0; | |
| /* virtual DMA functions */ | |
| esp->dma_mmu_get_scsi_one = &dma_mmu_get_scsi_one; | |
| esp->dma_mmu_get_scsi_sgl = &dma_mmu_get_scsi_sgl; | |
| esp->dma_mmu_release_scsi_one = 0; | |
| esp->dma_mmu_release_scsi_sgl = 0; | |
| esp->dma_advance_sg = &dma_advance_sg; | |
| /* SCSI chip speed */ | |
| esp->cfreq = 25000000; | |
| esp->dregs = 0; | |
| /* ESP register base */ | |
| esp->eregs = (void *)CKSEG1ADDR(dec_kn_slot_base + | |
| IOASIC_SCSI); | |
| /* Set the command buffer */ | |
| esp->esp_command = (volatile unsigned char *) cmd_buffer; | |
| /* get virtual dma address for command buffer */ | |
| esp->esp_command_dvma = virt_to_phys(cmd_buffer); | |
| esp->irq = dec_interrupt[DEC_IRQ_ASC]; | |
| esp->scsi_id = 7; | |
| /* Check for differential SCSI-bus */ | |
| esp->diff = 0; | |
| esp_initialize(esp); | |
| if (request_irq(esp->irq, esp_intr, IRQF_DISABLED, | |
| "ncr53c94", esp->ehost)) | |
| goto err_dealloc; | |
| if (request_irq(dec_interrupt[DEC_IRQ_ASC_MERR], | |
| scsi_dma_merr_int, IRQF_DISABLED, | |
| "ncr53c94 error", esp->ehost)) | |
| goto err_free_irq; | |
| if (request_irq(dec_interrupt[DEC_IRQ_ASC_ERR], | |
| scsi_dma_err_int, IRQF_DISABLED, | |
| "ncr53c94 overrun", esp->ehost)) | |
| goto err_free_irq_merr; | |
| if (request_irq(dec_interrupt[DEC_IRQ_ASC_DMA], | |
| scsi_dma_int, IRQF_DISABLED, | |
| "ncr53c94 dma", esp->ehost)) | |
| goto err_free_irq_err; | |
| } | |
| if (TURBOCHANNEL) { | |
| while ((slot = search_tc_card("PMAZ-AA")) >= 0) { | |
| claim_tc_card(slot); | |
| esp_dev = 0; | |
| esp = esp_allocate(tpnt, (void *) esp_dev); | |
| mem_start = get_tc_base_addr(slot); | |
| /* Store base addr into esp struct */ | |
| esp->slot = CPHYSADDR(mem_start); | |
| esp->dregs = 0; | |
| esp->eregs = (void *)CKSEG1ADDR(mem_start + | |
| DEC_SCSI_SREG); | |
| esp->do_pio_cmds = 1; | |
| /* Set the command buffer */ | |
| esp->esp_command = (volatile unsigned char *) pmaz_cmd_buffer; | |
| /* get virtual dma address for command buffer */ | |
| esp->esp_command_dvma = virt_to_phys(pmaz_cmd_buffer); | |
| esp->cfreq = get_tc_speed(); | |
| esp->irq = get_tc_irq_nr(slot); | |
| /* Required functions */ | |
| esp->dma_bytes_sent = &dma_bytes_sent; | |
| esp->dma_can_transfer = &dma_can_transfer; | |
| esp->dma_dump_state = &dma_dump_state; | |
| esp->dma_init_read = &pmaz_dma_init_read; | |
| esp->dma_init_write = &pmaz_dma_init_write; | |
| esp->dma_ints_off = &pmaz_dma_ints_off; | |
| esp->dma_ints_on = &pmaz_dma_ints_on; | |
| esp->dma_irq_p = &dma_irq_p; | |
| esp->dma_ports_p = &dma_ports_p; | |
| esp->dma_setup = &pmaz_dma_setup; | |
| /* Optional functions */ | |
| esp->dma_barrier = 0; | |
| esp->dma_drain = &pmaz_dma_drain; | |
| esp->dma_invalidate = 0; | |
| esp->dma_irq_entry = 0; | |
| esp->dma_irq_exit = 0; | |
| esp->dma_poll = 0; | |
| esp->dma_reset = 0; | |
| esp->dma_led_off = 0; | |
| esp->dma_led_on = 0; | |
| esp->dma_mmu_get_scsi_one = pmaz_dma_mmu_get_scsi_one; | |
| esp->dma_mmu_get_scsi_sgl = 0; | |
| esp->dma_mmu_release_scsi_one = 0; | |
| esp->dma_mmu_release_scsi_sgl = 0; | |
| esp->dma_advance_sg = 0; | |
| if (request_irq(esp->irq, esp_intr, IRQF_DISABLED, | |
| "PMAZ_AA", esp->ehost)) { | |
| esp_deallocate(esp); | |
| release_tc_card(slot); | |
| continue; | |
| } | |
| esp->scsi_id = 7; | |
| esp->diff = 0; | |
| esp_initialize(esp); | |
| } | |
| } | |
| if(nesps) { | |
| printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use); | |
| esps_running = esps_in_use; | |
| return esps_in_use; | |
| } | |
| return 0; | |
| err_free_irq_err: | |
| free_irq(dec_interrupt[DEC_IRQ_ASC_ERR], scsi_dma_err_int); | |
| err_free_irq_merr: | |
| free_irq(dec_interrupt[DEC_IRQ_ASC_MERR], scsi_dma_merr_int); | |
| err_free_irq: | |
| free_irq(esp->irq, esp_intr); | |
| err_dealloc: | |
| esp_deallocate(esp); | |
| return 0; | |
| } | |
| /************************************************************* DMA Functions */ | |
| static irqreturn_t scsi_dma_merr_int(int irq, void *dev_id) | |
| { | |
| printk("Got unexpected SCSI DMA Interrupt! < "); | |
| printk("SCSI_DMA_MEMRDERR "); | |
| printk(">\n"); | |
| return IRQ_HANDLED; | |
| } | |
| static irqreturn_t scsi_dma_err_int(int irq, void *dev_id) | |
| { | |
| /* empty */ | |
| return IRQ_HANDLED; | |
| } | |
| static irqreturn_t scsi_dma_int(int irq, void *dev_id) | |
| { | |
| u32 scsi_next_ptr; | |
| scsi_next_ptr = ioasic_read(IO_REG_SCSI_DMA_P); | |
| /* next page */ | |
| scsi_next_ptr = (((scsi_next_ptr >> 3) + PAGE_SIZE) & PAGE_MASK) << 3; | |
| ioasic_write(IO_REG_SCSI_DMA_BP, scsi_next_ptr); | |
| fast_iob(); | |
| return IRQ_HANDLED; | |
| } | |
| static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) | |
| { | |
| return fifo_count; | |
| } | |
| static void dma_drain(struct NCR_ESP *esp) | |
| { | |
| u32 nw, data0, data1, scsi_data_ptr; | |
| u16 *p; | |
| nw = ioasic_read(IO_REG_SCSI_SCR); | |
| /* | |
| * Is there something in the dma buffers left? | |
| */ | |
| if (nw) { | |
| scsi_data_ptr = ioasic_read(IO_REG_SCSI_DMA_P) >> 3; | |
| p = phys_to_virt(scsi_data_ptr); | |
| switch (nw) { | |
| case 1: | |
| data0 = ioasic_read(IO_REG_SCSI_SDR0); | |
| p[0] = data0 & 0xffff; | |
| break; | |
| case 2: | |
| data0 = ioasic_read(IO_REG_SCSI_SDR0); | |
| p[0] = data0 & 0xffff; | |
| p[1] = (data0 >> 16) & 0xffff; | |
| break; | |
| case 3: | |
| data0 = ioasic_read(IO_REG_SCSI_SDR0); | |
| data1 = ioasic_read(IO_REG_SCSI_SDR1); | |
| p[0] = data0 & 0xffff; | |
| p[1] = (data0 >> 16) & 0xffff; | |
| p[2] = data1 & 0xffff; | |
| break; | |
| default: | |
| printk("Strange: %d words in dma buffer left\n", nw); | |
| break; | |
| } | |
| } | |
| } | |
| static int dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd * sp) | |
| { | |
| return sp->SCp.this_residual; | |
| } | |
| static void dma_dump_state(struct NCR_ESP *esp) | |
| { | |
| } | |
| static void dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length) | |
| { | |
| u32 scsi_next_ptr, ioasic_ssr; | |
| unsigned long flags; | |
| if (vaddress & 3) | |
| panic("dec_esp.c: unable to handle partial word transfers, yet..."); | |
| dma_cache_wback_inv((unsigned long) phys_to_virt(vaddress), length); | |
| spin_lock_irqsave(&ioasic_ssr_lock, flags); | |
| fast_mb(); | |
| ioasic_ssr = ioasic_read(IO_REG_SSR); | |
| ioasic_ssr &= ~IO_SSR_SCSI_DMA_EN; | |
| ioasic_write(IO_REG_SSR, ioasic_ssr); | |
| fast_wmb(); | |
| ioasic_write(IO_REG_SCSI_SCR, 0); | |
| ioasic_write(IO_REG_SCSI_DMA_P, vaddress << 3); | |
| /* prepare for next page */ | |
| scsi_next_ptr = ((vaddress + PAGE_SIZE) & PAGE_MASK) << 3; | |
| ioasic_write(IO_REG_SCSI_DMA_BP, scsi_next_ptr); | |
| ioasic_ssr |= (IO_SSR_SCSI_DMA_DIR | IO_SSR_SCSI_DMA_EN); | |
| fast_wmb(); | |
| ioasic_write(IO_REG_SSR, ioasic_ssr); | |
| fast_iob(); | |
| spin_unlock_irqrestore(&ioasic_ssr_lock, flags); | |
| } | |
| static void dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length) | |
| { | |
| u32 scsi_next_ptr, ioasic_ssr; | |
| unsigned long flags; | |
| if (vaddress & 3) | |
| panic("dec_esp.c: unable to handle partial word transfers, yet..."); | |
| dma_cache_wback_inv((unsigned long) phys_to_virt(vaddress), length); | |
| spin_lock_irqsave(&ioasic_ssr_lock, flags); | |
| fast_mb(); | |
| ioasic_ssr = ioasic_read(IO_REG_SSR); | |
| ioasic_ssr &= ~(IO_SSR_SCSI_DMA_DIR | IO_SSR_SCSI_DMA_EN); | |
| ioasic_write(IO_REG_SSR, ioasic_ssr); | |
| fast_wmb(); | |
| ioasic_write(IO_REG_SCSI_SCR, 0); | |
| ioasic_write(IO_REG_SCSI_DMA_P, vaddress << 3); | |
| /* prepare for next page */ | |
| scsi_next_ptr = ((vaddress + PAGE_SIZE) & PAGE_MASK) << 3; | |
| ioasic_write(IO_REG_SCSI_DMA_BP, scsi_next_ptr); | |
| ioasic_ssr |= IO_SSR_SCSI_DMA_EN; | |
| fast_wmb(); | |
| ioasic_write(IO_REG_SSR, ioasic_ssr); | |
| fast_iob(); | |
| spin_unlock_irqrestore(&ioasic_ssr_lock, flags); | |
| } | |
| static void dma_ints_off(struct NCR_ESP *esp) | |
| { | |
| disable_irq(dec_interrupt[DEC_IRQ_ASC_DMA]); | |
| } | |
| static void dma_ints_on(struct NCR_ESP *esp) | |
| { | |
| enable_irq(dec_interrupt[DEC_IRQ_ASC_DMA]); | |
| } | |
| static int dma_irq_p(struct NCR_ESP *esp) | |
| { | |
| return (esp->eregs->esp_status & ESP_STAT_INTR); | |
| } | |
| static int dma_ports_p(struct NCR_ESP *esp) | |
| { | |
| /* | |
| * FIXME: what's this good for? | |
| */ | |
| return 1; | |
| } | |
| static void dma_setup(struct NCR_ESP *esp, u32 addr, int count, int write) | |
| { | |
| /* | |
| * DMA_ST_WRITE means "move data from device to memory" | |
| * so when (write) is true, it actually means READ! | |
| */ | |
| if (write) | |
| dma_init_read(esp, addr, count); | |
| else | |
| dma_init_write(esp, addr, count); | |
| } | |
| static void dma_mmu_get_scsi_one(struct NCR_ESP *esp, struct scsi_cmnd * sp) | |
| { | |
| sp->SCp.ptr = (char *)virt_to_phys(sp->request_buffer); | |
| } | |
| static void dma_mmu_get_scsi_sgl(struct NCR_ESP *esp, struct scsi_cmnd * sp) | |
| { | |
| int sz = sp->SCp.buffers_residual; | |
| struct scatterlist *sg = sp->SCp.buffer; | |
| while (sz >= 0) { | |
| sg[sz].dma_address = page_to_phys(sg[sz].page) + sg[sz].offset; | |
| sz--; | |
| } | |
| sp->SCp.ptr = (char *)(sp->SCp.buffer->dma_address); | |
| } | |
| static void dma_advance_sg(struct scsi_cmnd * sp) | |
| { | |
| sp->SCp.ptr = (char *)(sp->SCp.buffer->dma_address); | |
| } | |
| static void pmaz_dma_drain(struct NCR_ESP *esp) | |
| { | |
| memcpy(phys_to_virt(esp_virt_buffer), | |
| (void *)CKSEG1ADDR(esp->slot + DEC_SCSI_SRAM + | |
| ESP_TGT_DMA_SIZE), | |
| scsi_current_length); | |
| } | |
| static void pmaz_dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length) | |
| { | |
| volatile u32 *dmareg = | |
| (volatile u32 *)CKSEG1ADDR(esp->slot + DEC_SCSI_DMAREG); | |
| if (length > ESP_TGT_DMA_SIZE) | |
| length = ESP_TGT_DMA_SIZE; | |
| *dmareg = TC_ESP_DMA_ADDR(ESP_TGT_DMA_SIZE); | |
| iob(); | |
| esp_virt_buffer = vaddress; | |
| scsi_current_length = length; | |
| } | |
| static void pmaz_dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length) | |
| { | |
| volatile u32 *dmareg = | |
| (volatile u32 *)CKSEG1ADDR(esp->slot + DEC_SCSI_DMAREG); | |
| memcpy((void *)CKSEG1ADDR(esp->slot + DEC_SCSI_SRAM + | |
| ESP_TGT_DMA_SIZE), | |
| phys_to_virt(vaddress), length); | |
| wmb(); | |
| *dmareg = TC_ESP_DMAR_WRITE | TC_ESP_DMA_ADDR(ESP_TGT_DMA_SIZE); | |
| iob(); | |
| } | |
| static void pmaz_dma_ints_off(struct NCR_ESP *esp) | |
| { | |
| } | |
| static void pmaz_dma_ints_on(struct NCR_ESP *esp) | |
| { | |
| } | |
| static void pmaz_dma_setup(struct NCR_ESP *esp, u32 addr, int count, int write) | |
| { | |
| /* | |
| * DMA_ST_WRITE means "move data from device to memory" | |
| * so when (write) is true, it actually means READ! | |
| */ | |
| if (write) | |
| pmaz_dma_init_read(esp, addr, count); | |
| else | |
| pmaz_dma_init_write(esp, addr, count); | |
| } | |
| static void pmaz_dma_mmu_get_scsi_one(struct NCR_ESP *esp, struct scsi_cmnd * sp) | |
| { | |
| sp->SCp.ptr = (char *)virt_to_phys(sp->request_buffer); | |
| } |