| /* | |
| * Serial Attached SCSI (SAS) class internal header file | |
| * | |
| * Copyright (C) 2005 Adaptec, Inc. All rights reserved. | |
| * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> | |
| * | |
| * This file is licensed under GPLv2. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of the | |
| * License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 | |
| * USA | |
| * | |
| */ | |
| #ifndef _SAS_INTERNAL_H_ | |
| #define _SAS_INTERNAL_H_ | |
| #include <scsi/scsi.h> | |
| #include <scsi/scsi_host.h> | |
| #include <scsi/scsi_transport_sas.h> | |
| #include <scsi/libsas.h> | |
| #define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__) | |
| #ifdef SAS_DEBUG | |
| #define SAS_DPRINTK(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__) | |
| #else | |
| #define SAS_DPRINTK(fmt, ...) | |
| #endif | |
| void sas_scsi_recover_host(struct Scsi_Host *shost); | |
| int sas_show_class(enum sas_class class, char *buf); | |
| int sas_show_proto(enum sas_proto proto, char *buf); | |
| int sas_show_linkrate(enum sas_linkrate linkrate, char *buf); | |
| int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf); | |
| int sas_register_phys(struct sas_ha_struct *sas_ha); | |
| void sas_unregister_phys(struct sas_ha_struct *sas_ha); | |
| int sas_register_ports(struct sas_ha_struct *sas_ha); | |
| void sas_unregister_ports(struct sas_ha_struct *sas_ha); | |
| enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *); | |
| int sas_init_queue(struct sas_ha_struct *sas_ha); | |
| int sas_init_events(struct sas_ha_struct *sas_ha); | |
| void sas_shutdown_queue(struct sas_ha_struct *sas_ha); | |
| void sas_deform_port(struct asd_sas_phy *phy); | |
| void sas_porte_bytes_dmaed(void *); | |
| void sas_porte_broadcast_rcvd(void *); | |
| void sas_porte_link_reset_err(void *); | |
| void sas_porte_timer_event(void *); | |
| void sas_porte_hard_reset(void *); | |
| int sas_notify_lldd_dev_found(struct domain_device *); | |
| void sas_notify_lldd_dev_gone(struct domain_device *); | |
| int sas_smp_phy_control(struct domain_device *dev, int phy_id, | |
| enum phy_func phy_func, struct sas_phy_linkrates *); | |
| int sas_smp_get_phy_events(struct sas_phy *phy); | |
| struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy); | |
| void sas_hae_reset(void *); | |
| static inline void sas_queue_event(int event, spinlock_t *lock, | |
| unsigned long *pending, | |
| struct work_struct *work, | |
| struct Scsi_Host *shost) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(lock, flags); | |
| if (test_bit(event, pending)) { | |
| spin_unlock_irqrestore(lock, flags); | |
| return; | |
| } | |
| __set_bit(event, pending); | |
| spin_unlock_irqrestore(lock, flags); | |
| scsi_queue_work(shost, work); | |
| } | |
| static inline void sas_begin_event(int event, spinlock_t *lock, | |
| unsigned long *pending) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(lock, flags); | |
| __clear_bit(event, pending); | |
| spin_unlock_irqrestore(lock, flags); | |
| } | |
| static inline void sas_fill_in_rphy(struct domain_device *dev, | |
| struct sas_rphy *rphy) | |
| { | |
| rphy->identify.sas_address = SAS_ADDR(dev->sas_addr); | |
| rphy->identify.initiator_port_protocols = dev->iproto; | |
| rphy->identify.target_port_protocols = dev->tproto; | |
| switch (dev->dev_type) { | |
| case SATA_DEV: | |
| /* FIXME: need sata device type */ | |
| case SAS_END_DEV: | |
| rphy->identify.device_type = SAS_END_DEVICE; | |
| break; | |
| case EDGE_DEV: | |
| rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE; | |
| break; | |
| case FANOUT_DEV: | |
| rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE; | |
| break; | |
| default: | |
| rphy->identify.device_type = SAS_PHY_UNUSED; | |
| break; | |
| } | |
| } | |
| static inline void sas_add_parent_port(struct domain_device *dev, int phy_id) | |
| { | |
| struct expander_device *ex = &dev->ex_dev; | |
| struct ex_phy *ex_phy = &ex->ex_phy[phy_id]; | |
| if (!ex->parent_port) { | |
| ex->parent_port = sas_port_alloc(&dev->rphy->dev, phy_id); | |
| /* FIXME: error handling */ | |
| BUG_ON(!ex->parent_port); | |
| BUG_ON(sas_port_add(ex->parent_port)); | |
| sas_port_mark_backlink(ex->parent_port); | |
| } | |
| sas_port_add_phy(ex->parent_port, ex_phy->phy); | |
| } | |
| #endif /* _SAS_INTERNAL_H_ */ |