| /******************************************************************* | |
| * This file is part of the Emulex Linux Device Driver for * | |
| * Fibre Channel Host Bus Adapters. * | |
| * Copyright (C) 2004-2006 Emulex. All rights reserved. * | |
| * EMULEX and SLI are trademarks of Emulex. * | |
| * www.emulex.com * | |
| * * | |
| * This program is free software; you can redistribute it and/or * | |
| * modify it under the terms of version 2 of the GNU General * | |
| * Public License as published by the Free Software Foundation. * | |
| * This program is distributed in the hope that it will be useful. * | |
| * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * | |
| * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * | |
| * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * | |
| * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * | |
| * TO BE LEGALLY INVALID. See the GNU General Public License for * | |
| * more details, a copy of which can be found in the file COPYING * | |
| * included with this package. * | |
| *******************************************************************/ | |
| #define FC_MAX_HOLD_RSCN 32 /* max number of deferred RSCNs */ | |
| #define FC_MAX_NS_RSP 65536 /* max size NameServer rsp */ | |
| #define FC_MAXLOOP 126 /* max devices supported on a fc loop */ | |
| #define LPFC_DISC_FLOGI_TMO 10 /* Discovery FLOGI ratov */ | |
| /* This is the protocol dependent definition for a Node List Entry. | |
| * This is used by Fibre Channel protocol to support FCP. | |
| */ | |
| /* worker thread events */ | |
| enum lpfc_work_type { | |
| LPFC_EVT_ONLINE, | |
| LPFC_EVT_OFFLINE, | |
| LPFC_EVT_WARM_START, | |
| LPFC_EVT_KILL, | |
| LPFC_EVT_ELS_RETRY, | |
| }; | |
| /* structure used to queue event to the discovery tasklet */ | |
| struct lpfc_work_evt { | |
| struct list_head evt_listp; | |
| void * evt_arg1; | |
| void * evt_arg2; | |
| enum lpfc_work_type evt; | |
| }; | |
| struct lpfc_nodelist { | |
| struct list_head nlp_listp; | |
| struct lpfc_name nlp_portname; /* port name */ | |
| struct lpfc_name nlp_nodename; /* node name */ | |
| uint32_t nlp_flag; /* entry flags */ | |
| uint32_t nlp_DID; /* FC D_ID of entry */ | |
| uint32_t nlp_last_elscmd; /* Last ELS cmd sent */ | |
| uint16_t nlp_type; | |
| #define NLP_FC_NODE 0x1 /* entry is an FC node */ | |
| #define NLP_FABRIC 0x4 /* entry rep a Fabric entity */ | |
| #define NLP_FCP_TARGET 0x8 /* entry is an FCP target */ | |
| #define NLP_FCP_INITIATOR 0x10 /* entry is an FCP Initiator */ | |
| uint16_t nlp_rpi; | |
| uint16_t nlp_state; /* state transition indicator */ | |
| uint16_t nlp_prev_state; /* state transition indicator */ | |
| uint16_t nlp_xri; /* output exchange id for RPI */ | |
| uint16_t nlp_sid; /* scsi id */ | |
| #define NLP_NO_SID 0xffff | |
| uint16_t nlp_maxframe; /* Max RCV frame size */ | |
| uint8_t nlp_class_sup; /* Supported Classes */ | |
| uint8_t nlp_retry; /* used for ELS retries */ | |
| uint8_t nlp_disc_refcnt; /* used for DSM */ | |
| uint8_t nlp_fcp_info; /* class info, bits 0-3 */ | |
| #define NLP_FCP_2_DEVICE 0x10 /* FCP-2 device */ | |
| struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */ | |
| struct fc_rport *rport; /* Corresponding FC transport | |
| port structure */ | |
| struct lpfc_hba *nlp_phba; | |
| struct lpfc_work_evt els_retry_evt; | |
| unsigned long last_ramp_up_time; /* jiffy of last ramp up */ | |
| unsigned long last_q_full_time; /* jiffy of last queue full */ | |
| }; | |
| /* Defines for nlp_flag (uint32) */ | |
| #define NLP_NO_LIST 0x0 /* Indicates immediately free node */ | |
| #define NLP_UNUSED_LIST 0x1 /* Flg to indicate node will be freed */ | |
| #define NLP_PLOGI_LIST 0x2 /* Flg to indicate sent PLOGI */ | |
| #define NLP_ADISC_LIST 0x3 /* Flg to indicate sent ADISC */ | |
| #define NLP_REGLOGIN_LIST 0x4 /* Flg to indicate sent REG_LOGIN */ | |
| #define NLP_PRLI_LIST 0x5 /* Flg to indicate sent PRLI */ | |
| #define NLP_UNMAPPED_LIST 0x6 /* Node is now unmapped */ | |
| #define NLP_MAPPED_LIST 0x7 /* Node is now mapped */ | |
| #define NLP_NPR_LIST 0x8 /* Node is in NPort Recovery state */ | |
| #define NLP_JUST_DQ 0x9 /* just deque ndlp in lpfc_nlp_list */ | |
| #define NLP_LIST_MASK 0xf /* mask to see what list node is on */ | |
| #define NLP_PLOGI_SND 0x20 /* sent PLOGI request for this entry */ | |
| #define NLP_PRLI_SND 0x40 /* sent PRLI request for this entry */ | |
| #define NLP_ADISC_SND 0x80 /* sent ADISC request for this entry */ | |
| #define NLP_LOGO_SND 0x100 /* sent LOGO request for this entry */ | |
| #define NLP_RNID_SND 0x400 /* sent RNID request for this entry */ | |
| #define NLP_ELS_SND_MASK 0x7e0 /* sent ELS request for this entry */ | |
| #define NLP_DELAY_TMO 0x20000 /* delay timeout is running for node */ | |
| #define NLP_NPR_2B_DISC 0x40000 /* node is included in num_disc_nodes */ | |
| #define NLP_RCV_PLOGI 0x80000 /* Rcv'ed PLOGI from remote system */ | |
| #define NLP_LOGO_ACC 0x100000 /* Process LOGO after ACC completes */ | |
| #define NLP_TGT_NO_SCSIID 0x200000 /* good PRLI but no binding for scsid */ | |
| #define NLP_ACC_REGLOGIN 0x1000000 /* Issue Reg Login after successful | |
| ACC */ | |
| #define NLP_NPR_ADISC 0x2000000 /* Issue ADISC when dq'ed from | |
| NPR list */ | |
| #define NLP_DELAY_REMOVE 0x4000000 /* Defer removal till end of DSM */ | |
| #define NLP_NODEV_REMOVE 0x8000000 /* Defer removal till discovery ends */ | |
| /* Defines for list searchs */ | |
| #define NLP_SEARCH_MAPPED 0x1 /* search mapped */ | |
| #define NLP_SEARCH_UNMAPPED 0x2 /* search unmapped */ | |
| #define NLP_SEARCH_PLOGI 0x4 /* search plogi */ | |
| #define NLP_SEARCH_ADISC 0x8 /* search adisc */ | |
| #define NLP_SEARCH_REGLOGIN 0x10 /* search reglogin */ | |
| #define NLP_SEARCH_PRLI 0x20 /* search prli */ | |
| #define NLP_SEARCH_NPR 0x40 /* search npr */ | |
| #define NLP_SEARCH_UNUSED 0x80 /* search mapped */ | |
| #define NLP_SEARCH_ALL 0xff /* search all lists */ | |
| /* There are 4 different double linked lists nodelist entries can reside on. | |
| * The Port Login (PLOGI) list and Address Discovery (ADISC) list are used | |
| * when Link Up discovery or Registered State Change Notification (RSCN) | |
| * processing is needed. Each list holds the nodes that require a PLOGI or | |
| * ADISC Extended Link Service (ELS) request. These lists keep track of the | |
| * nodes affected by an RSCN, or a Link Up (Typically, all nodes are effected | |
| * by Link Up) event. The unmapped_list contains all nodes that have | |
| * successfully logged into at the Fibre Channel level. The | |
| * mapped_list will contain all nodes that are mapped FCP targets. | |
| * | |
| * The bind list is a list of undiscovered (potentially non-existent) nodes | |
| * that we have saved binding information on. This information is used when | |
| * nodes transition from the unmapped to the mapped list. | |
| */ | |
| /* Defines for nlp_state */ | |
| #define NLP_STE_UNUSED_NODE 0x0 /* node is just allocated */ | |
| #define NLP_STE_PLOGI_ISSUE 0x1 /* PLOGI was sent to NL_PORT */ | |
| #define NLP_STE_ADISC_ISSUE 0x2 /* ADISC was sent to NL_PORT */ | |
| #define NLP_STE_REG_LOGIN_ISSUE 0x3 /* REG_LOGIN was issued for NL_PORT */ | |
| #define NLP_STE_PRLI_ISSUE 0x4 /* PRLI was sent to NL_PORT */ | |
| #define NLP_STE_UNMAPPED_NODE 0x5 /* PRLI completed from NL_PORT */ | |
| #define NLP_STE_MAPPED_NODE 0x6 /* Identified as a FCP Target */ | |
| #define NLP_STE_NPR_NODE 0x7 /* NPort disappeared */ | |
| #define NLP_STE_MAX_STATE 0x8 | |
| #define NLP_STE_FREED_NODE 0xff /* node entry was freed to MEM_NLP */ | |
| /* For UNUSED_NODE state, the node has just been allocated. | |
| * For PLOGI_ISSUE and REG_LOGIN_ISSUE, the node is on | |
| * the PLOGI list. For REG_LOGIN_COMPL, the node is taken off the PLOGI list | |
| * and put on the unmapped list. For ADISC processing, the node is taken off | |
| * the ADISC list and placed on either the mapped or unmapped list (depending | |
| * on its previous state). Once on the unmapped list, a PRLI is issued and the | |
| * state changed to PRLI_ISSUE. When the PRLI completion occurs, the state is | |
| * changed to PRLI_COMPL. If the completion indicates a mapped | |
| * node, the node is taken off the unmapped list. The binding list is checked | |
| * for a valid binding, or a binding is automatically assigned. If binding | |
| * assignment is unsuccessful, the node is left on the unmapped list. If | |
| * binding assignment is successful, the associated binding list entry (if | |
| * any) is removed, and the node is placed on the mapped list. | |
| */ | |
| /* | |
| * For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped | |
| * lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers | |
| * expire, all effected nodes will receive a DEVICE_RM event. | |
| */ | |
| /* | |
| * For a Link Up or RSCN, all nodes will move from the mapped / unmapped lists | |
| * to either the ADISC or PLOGI list. After a Nameserver query or ALPA loopmap | |
| * check, additional nodes may be added (DEVICE_ADD) or removed (DEVICE_RM) to / | |
| * from the PLOGI or ADISC lists. Once the PLOGI and ADISC lists are populated, | |
| * we will first process the ADISC list. 32 entries are processed initially and | |
| * ADISC is initited for each one. Completions / Events for each node are | |
| * funnelled thru the state machine. As each node finishes ADISC processing, it | |
| * starts ADISC for any nodes waiting for ADISC processing. If no nodes are | |
| * waiting, and the ADISC list count is identically 0, then we are done. For | |
| * Link Up discovery, since all nodes on the PLOGI list are UNREG_LOGIN'ed, we | |
| * can issue a CLEAR_LA and reenable Link Events. Next we will process the PLOGI | |
| * list. 32 entries are processed initially and PLOGI is initited for each one. | |
| * Completions / Events for each node are funnelled thru the state machine. As | |
| * each node finishes PLOGI processing, it starts PLOGI for any nodes waiting | |
| * for PLOGI processing. If no nodes are waiting, and the PLOGI list count is | |
| * identically 0, then we are done. We have now completed discovery / RSCN | |
| * handling. Upon completion, ALL nodes should be on either the mapped or | |
| * unmapped lists. | |
| */ | |
| /* Defines for Node List Entry Events that could happen */ | |
| #define NLP_EVT_RCV_PLOGI 0x0 /* Rcv'd an ELS PLOGI command */ | |
| #define NLP_EVT_RCV_PRLI 0x1 /* Rcv'd an ELS PRLI command */ | |
| #define NLP_EVT_RCV_LOGO 0x2 /* Rcv'd an ELS LOGO command */ | |
| #define NLP_EVT_RCV_ADISC 0x3 /* Rcv'd an ELS ADISC command */ | |
| #define NLP_EVT_RCV_PDISC 0x4 /* Rcv'd an ELS PDISC command */ | |
| #define NLP_EVT_RCV_PRLO 0x5 /* Rcv'd an ELS PRLO command */ | |
| #define NLP_EVT_CMPL_PLOGI 0x6 /* Sent an ELS PLOGI command */ | |
| #define NLP_EVT_CMPL_PRLI 0x7 /* Sent an ELS PRLI command */ | |
| #define NLP_EVT_CMPL_LOGO 0x8 /* Sent an ELS LOGO command */ | |
| #define NLP_EVT_CMPL_ADISC 0x9 /* Sent an ELS ADISC command */ | |
| #define NLP_EVT_CMPL_REG_LOGIN 0xa /* REG_LOGIN mbox cmd completed */ | |
| #define NLP_EVT_DEVICE_RM 0xb /* Device not found in NS / ALPAmap */ | |
| #define NLP_EVT_DEVICE_RECOVERY 0xc /* Device existence unknown */ | |
| #define NLP_EVT_MAX_EVENT 0xd | |