| /******************************************************************* | |
| * This file is part of the Emulex Linux Device Driver for * | |
| * Fibre Channel Host Bus Adapters. * | |
| * Copyright (C) 2004-2005 Emulex. All rights reserved. * | |
| * EMULEX and SLI are trademarks of Emulex. * | |
| * www.emulex.com * | |
| * * | |
| * This program is free software; you can redistribute it and/or * | |
| * modify it under the terms of version 2 of the GNU General * | |
| * Public License as published by the Free Software Foundation. * | |
| * This program is distributed in the hope that it will be useful. * | |
| * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * | |
| * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * | |
| * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * | |
| * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * | |
| * TO BE LEGALLY INVALID. See the GNU General Public License for * | |
| * more details, a copy of which can be found in the file COPYING * | |
| * included with this package. * | |
| *******************************************************************/ | |
| #include <asm/byteorder.h> | |
| struct lpfc_hba; | |
| #define list_remove_head(list, entry, type, member) \ | |
| do { \ | |
| entry = NULL; \ | |
| if (!list_empty(list)) { \ | |
| entry = list_entry((list)->next, type, member); \ | |
| list_del_init(&entry->member); \ | |
| } \ | |
| } while(0) | |
| #define list_get_first(list, type, member) \ | |
| (list_empty(list)) ? NULL : \ | |
| list_entry((list)->next, type, member) | |
| /* per-port data that is allocated in the FC transport for us */ | |
| struct lpfc_rport_data { | |
| struct lpfc_nodelist *pnode; /* Pointer to the node structure. */ | |
| }; | |
| struct fcp_rsp { | |
| uint32_t rspRsvd1; /* FC Word 0, byte 0:3 */ | |
| uint32_t rspRsvd2; /* FC Word 1, byte 0:3 */ | |
| uint8_t rspStatus0; /* FCP_STATUS byte 0 (reserved) */ | |
| uint8_t rspStatus1; /* FCP_STATUS byte 1 (reserved) */ | |
| uint8_t rspStatus2; /* FCP_STATUS byte 2 field validity */ | |
| #define RSP_LEN_VALID 0x01 /* bit 0 */ | |
| #define SNS_LEN_VALID 0x02 /* bit 1 */ | |
| #define RESID_OVER 0x04 /* bit 2 */ | |
| #define RESID_UNDER 0x08 /* bit 3 */ | |
| uint8_t rspStatus3; /* FCP_STATUS byte 3 SCSI status byte */ | |
| uint32_t rspResId; /* Residual xfer if residual count field set in | |
| fcpStatus2 */ | |
| /* Received in Big Endian format */ | |
| uint32_t rspSnsLen; /* Length of sense data in fcpSnsInfo */ | |
| /* Received in Big Endian format */ | |
| uint32_t rspRspLen; /* Length of FCP response data in fcpRspInfo */ | |
| /* Received in Big Endian format */ | |
| uint8_t rspInfo0; /* FCP_RSP_INFO byte 0 (reserved) */ | |
| uint8_t rspInfo1; /* FCP_RSP_INFO byte 1 (reserved) */ | |
| uint8_t rspInfo2; /* FCP_RSP_INFO byte 2 (reserved) */ | |
| uint8_t rspInfo3; /* FCP_RSP_INFO RSP_CODE byte 3 */ | |
| #define RSP_NO_FAILURE 0x00 | |
| #define RSP_DATA_BURST_ERR 0x01 | |
| #define RSP_CMD_FIELD_ERR 0x02 | |
| #define RSP_RO_MISMATCH_ERR 0x03 | |
| #define RSP_TM_NOT_SUPPORTED 0x04 /* Task mgmt function not supported */ | |
| #define RSP_TM_NOT_COMPLETED 0x05 /* Task mgmt function not performed */ | |
| uint32_t rspInfoRsvd; /* FCP_RSP_INFO bytes 4-7 (reserved) */ | |
| uint8_t rspSnsInfo[128]; | |
| #define SNS_ILLEGAL_REQ 0x05 /* sense key is byte 3 ([2]) */ | |
| #define SNSCOD_BADCMD 0x20 /* sense code is byte 13 ([12]) */ | |
| }; | |
| struct fcp_cmnd { | |
| struct scsi_lun fcp_lun; | |
| uint8_t fcpCntl0; /* FCP_CNTL byte 0 (reserved) */ | |
| uint8_t fcpCntl1; /* FCP_CNTL byte 1 task codes */ | |
| #define SIMPLE_Q 0x00 | |
| #define HEAD_OF_Q 0x01 | |
| #define ORDERED_Q 0x02 | |
| #define ACA_Q 0x04 | |
| #define UNTAGGED 0x05 | |
| uint8_t fcpCntl2; /* FCP_CTL byte 2 task management codes */ | |
| #define FCP_ABORT_TASK_SET 0x02 /* Bit 1 */ | |
| #define FCP_CLEAR_TASK_SET 0x04 /* bit 2 */ | |
| #define FCP_BUS_RESET 0x08 /* bit 3 */ | |
| #define FCP_LUN_RESET 0x10 /* bit 4 */ | |
| #define FCP_TARGET_RESET 0x20 /* bit 5 */ | |
| #define FCP_CLEAR_ACA 0x40 /* bit 6 */ | |
| #define FCP_TERMINATE_TASK 0x80 /* bit 7 */ | |
| uint8_t fcpCntl3; | |
| #define WRITE_DATA 0x01 /* Bit 0 */ | |
| #define READ_DATA 0x02 /* Bit 1 */ | |
| uint8_t fcpCdb[16]; /* SRB cdb field is copied here */ | |
| uint32_t fcpDl; /* Total transfer length */ | |
| }; | |
| struct lpfc_scsi_buf { | |
| struct list_head list; | |
| struct scsi_cmnd *pCmd; | |
| struct lpfc_hba *scsi_hba; | |
| struct lpfc_rport_data *rdata; | |
| uint32_t timeout; | |
| uint16_t status; /* From IOCB Word 7- ulpStatus */ | |
| uint32_t result; /* From IOCB Word 4. */ | |
| uint32_t seg_cnt; /* Number of scatter-gather segments returned by | |
| * dma_map_sg. The driver needs this for calls | |
| * to dma_unmap_sg. */ | |
| dma_addr_t nonsg_phys; /* Non scatter-gather physical address. */ | |
| /* | |
| * data and dma_handle are the kernel virutal and bus address of the | |
| * dma-able buffer containing the fcp_cmd, fcp_rsp and a scatter | |
| * gather bde list that supports the sg_tablesize value. | |
| */ | |
| void *data; | |
| dma_addr_t dma_handle; | |
| struct fcp_cmnd *fcp_cmnd; | |
| struct fcp_rsp *fcp_rsp; | |
| struct ulp_bde64 *fcp_bpl; | |
| /* cur_iocbq has phys of the dma-able buffer. | |
| * Iotag is in here | |
| */ | |
| struct lpfc_iocbq cur_iocbq; | |
| }; | |
| #define LPFC_SCSI_DMA_EXT_SIZE 264 | |
| #define LPFC_BPL_SIZE 1024 | |
| #define MDAC_DIRECT_CMD 0x22 |