| /* | |
| * NetChip 2280 high/full speed USB device controller. | |
| * Unlike many such controllers, this one talks PCI. | |
| */ | |
| /* | |
| * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) | |
| * Copyright (C) 2003 David Brownell | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/usb/net2280.h> | |
| /*-------------------------------------------------------------------------*/ | |
| #ifdef __KERNEL__ | |
| /* indexed registers [11.10] are accessed indirectly | |
| * caller must own the device lock. | |
| */ | |
| static inline u32 | |
| get_idx_reg (struct net2280_regs __iomem *regs, u32 index) | |
| { | |
| writel (index, ®s->idxaddr); | |
| /* NOTE: synchs device/cpu memory views */ | |
| return readl (®s->idxdata); | |
| } | |
| static inline void | |
| set_idx_reg (struct net2280_regs __iomem *regs, u32 index, u32 value) | |
| { | |
| writel (index, ®s->idxaddr); | |
| writel (value, ®s->idxdata); | |
| /* posted, may not be visible yet */ | |
| } | |
| #endif /* __KERNEL__ */ | |
| #define REG_DIAG 0x0 | |
| #define RETRY_COUNTER 16 | |
| #define FORCE_PCI_SERR 11 | |
| #define FORCE_PCI_INTERRUPT 10 | |
| #define FORCE_USB_INTERRUPT 9 | |
| #define FORCE_CPU_INTERRUPT 8 | |
| #define ILLEGAL_BYTE_ENABLES 5 | |
| #define FAST_TIMES 4 | |
| #define FORCE_RECEIVE_ERROR 2 | |
| #define FORCE_TRANSMIT_CRC_ERROR 0 | |
| #define REG_FRAME 0x02 /* from last sof */ | |
| #define REG_CHIPREV 0x03 /* in bcd */ | |
| #define REG_HS_NAK_RATE 0x0a /* NAK per N uframes */ | |
| #define CHIPREV_1 0x0100 | |
| #define CHIPREV_1A 0x0110 | |
| #ifdef __KERNEL__ | |
| /* ep a-f highspeed and fullspeed maxpacket, addresses | |
| * computed from ep->num | |
| */ | |
| #define REG_EP_MAXPKT(dev,num) (((num) + 1) * 0x10 + \ | |
| (((dev)->gadget.speed == USB_SPEED_HIGH) ? 0 : 1)) | |
| /*-------------------------------------------------------------------------*/ | |
| /* [8.3] for scatter/gather i/o | |
| * use struct net2280_dma_regs bitfields | |
| */ | |
| struct net2280_dma { | |
| __le32 dmacount; | |
| __le32 dmaaddr; /* the buffer */ | |
| __le32 dmadesc; /* next dma descriptor */ | |
| __le32 _reserved; | |
| } __attribute__ ((aligned (16))); | |
| /*-------------------------------------------------------------------------*/ | |
| /* DRIVER DATA STRUCTURES and UTILITIES */ | |
| struct net2280_ep { | |
| struct usb_ep ep; | |
| struct net2280_ep_regs __iomem *regs; | |
| struct net2280_dma_regs __iomem *dma; | |
| struct net2280_dma *dummy; | |
| dma_addr_t td_dma; /* of dummy */ | |
| struct net2280 *dev; | |
| unsigned long irqs; | |
| /* analogous to a host-side qh */ | |
| struct list_head queue; | |
| const struct usb_endpoint_descriptor *desc; | |
| unsigned num : 8, | |
| fifo_size : 12, | |
| in_fifo_validate : 1, | |
| out_overflow : 1, | |
| stopped : 1, | |
| is_in : 1, | |
| is_iso : 1; | |
| }; | |
| static inline void allow_status (struct net2280_ep *ep) | |
| { | |
| /* ep0 only */ | |
| writel ( (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) | |
| | (1 << CLEAR_NAK_OUT_PACKETS) | |
| | (1 << CLEAR_NAK_OUT_PACKETS_MODE) | |
| , &ep->regs->ep_rsp); | |
| ep->stopped = 1; | |
| } | |
| /* count (<= 4) bytes in the next fifo write will be valid */ | |
| static inline void set_fifo_bytecount (struct net2280_ep *ep, unsigned count) | |
| { | |
| writeb (count, 2 + (u8 __iomem *) &ep->regs->ep_cfg); | |
| } | |
| struct net2280_request { | |
| struct usb_request req; | |
| struct net2280_dma *td; | |
| dma_addr_t td_dma; | |
| struct list_head queue; | |
| unsigned mapped : 1, | |
| valid : 1; | |
| }; | |
| struct net2280 { | |
| /* each pci device provides one gadget, several endpoints */ | |
| struct usb_gadget gadget; | |
| spinlock_t lock; | |
| struct net2280_ep ep [7]; | |
| struct usb_gadget_driver *driver; | |
| unsigned enabled : 1, | |
| protocol_stall : 1, | |
| softconnect : 1, | |
| got_irq : 1, | |
| region : 1; | |
| u16 chiprev; | |
| /* pci state used to access those endpoints */ | |
| struct pci_dev *pdev; | |
| struct net2280_regs __iomem *regs; | |
| struct net2280_usb_regs __iomem *usb; | |
| struct net2280_pci_regs __iomem *pci; | |
| struct net2280_dma_regs __iomem *dma; | |
| struct net2280_dep_regs __iomem *dep; | |
| struct net2280_ep_regs __iomem *epregs; | |
| struct pci_pool *requests; | |
| // statistics... | |
| }; | |
| static inline void set_halt (struct net2280_ep *ep) | |
| { | |
| /* ep0 and bulk/intr endpoints */ | |
| writel ( (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) | |
| /* set NAK_OUT for erratum 0114 */ | |
| | ((ep->dev->chiprev == CHIPREV_1) << SET_NAK_OUT_PACKETS) | |
| | (1 << SET_ENDPOINT_HALT) | |
| , &ep->regs->ep_rsp); | |
| } | |
| static inline void clear_halt (struct net2280_ep *ep) | |
| { | |
| /* ep0 and bulk/intr endpoints */ | |
| writel ( (1 << CLEAR_ENDPOINT_HALT) | |
| | (1 << CLEAR_ENDPOINT_TOGGLE) | |
| /* unless the gadget driver left a short packet in the | |
| * fifo, this reverses the erratum 0114 workaround. | |
| */ | |
| | ((ep->dev->chiprev == CHIPREV_1) << CLEAR_NAK_OUT_PACKETS) | |
| , &ep->regs->ep_rsp); | |
| } | |
| #ifdef USE_RDK_LEDS | |
| static inline void net2280_led_init (struct net2280 *dev) | |
| { | |
| /* LED3 (green) is on during USB activity. note erratum 0113. */ | |
| writel ((1 << GPIO3_LED_SELECT) | |
| | (1 << GPIO3_OUTPUT_ENABLE) | |
| | (1 << GPIO2_OUTPUT_ENABLE) | |
| | (1 << GPIO1_OUTPUT_ENABLE) | |
| | (1 << GPIO0_OUTPUT_ENABLE) | |
| , &dev->regs->gpioctl); | |
| } | |
| /* indicate speed with bi-color LED 0/1 */ | |
| static inline | |
| void net2280_led_speed (struct net2280 *dev, enum usb_device_speed speed) | |
| { | |
| u32 val = readl (&dev->regs->gpioctl); | |
| switch (speed) { | |
| case USB_SPEED_HIGH: /* green */ | |
| val &= ~(1 << GPIO0_DATA); | |
| val |= (1 << GPIO1_DATA); | |
| break; | |
| case USB_SPEED_FULL: /* red */ | |
| val &= ~(1 << GPIO1_DATA); | |
| val |= (1 << GPIO0_DATA); | |
| break; | |
| default: /* (off/black) */ | |
| val &= ~((1 << GPIO1_DATA) | (1 << GPIO0_DATA)); | |
| break; | |
| } | |
| writel (val, &dev->regs->gpioctl); | |
| } | |
| /* indicate power with LED 2 */ | |
| static inline void net2280_led_active (struct net2280 *dev, int is_active) | |
| { | |
| u32 val = readl (&dev->regs->gpioctl); | |
| // FIXME this LED never seems to turn on. | |
| if (is_active) | |
| val |= GPIO2_DATA; | |
| else | |
| val &= ~GPIO2_DATA; | |
| writel (val, &dev->regs->gpioctl); | |
| } | |
| static inline void net2280_led_shutdown (struct net2280 *dev) | |
| { | |
| /* turn off all four GPIO*_DATA bits */ | |
| writel (readl (&dev->regs->gpioctl) & ~0x0f, | |
| &dev->regs->gpioctl); | |
| } | |
| #else | |
| #define net2280_led_init(dev) do { } while (0) | |
| #define net2280_led_speed(dev, speed) do { } while (0) | |
| #define net2280_led_shutdown(dev) do { } while (0) | |
| #endif | |
| /*-------------------------------------------------------------------------*/ | |
| #define xprintk(dev,level,fmt,args...) \ | |
| printk(level "%s %s: " fmt , driver_name , \ | |
| pci_name(dev->pdev) , ## args) | |
| #ifdef DEBUG | |
| #undef DEBUG | |
| #define DEBUG(dev,fmt,args...) \ | |
| xprintk(dev , KERN_DEBUG , fmt , ## args) | |
| #else | |
| #define DEBUG(dev,fmt,args...) \ | |
| do { } while (0) | |
| #endif /* DEBUG */ | |
| #ifdef VERBOSE | |
| #define VDEBUG DEBUG | |
| #else | |
| #define VDEBUG(dev,fmt,args...) \ | |
| do { } while (0) | |
| #endif /* VERBOSE */ | |
| #define ERROR(dev,fmt,args...) \ | |
| xprintk(dev , KERN_ERR , fmt , ## args) | |
| #define WARN(dev,fmt,args...) \ | |
| xprintk(dev , KERN_WARNING , fmt , ## args) | |
| #define INFO(dev,fmt,args...) \ | |
| xprintk(dev , KERN_INFO , fmt , ## args) | |
| /*-------------------------------------------------------------------------*/ | |
| static inline void start_out_naking (struct net2280_ep *ep) | |
| { | |
| /* NOTE: hardware races lurk here, and PING protocol issues */ | |
| writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); | |
| /* synch with device */ | |
| readl (&ep->regs->ep_rsp); | |
| } | |
| #ifdef DEBUG | |
| static inline void assert_out_naking (struct net2280_ep *ep, const char *where) | |
| { | |
| u32 tmp = readl (&ep->regs->ep_stat); | |
| if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) { | |
| DEBUG (ep->dev, "%s %s %08x !NAK\n", | |
| ep->ep.name, where, tmp); | |
| writel ((1 << SET_NAK_OUT_PACKETS), | |
| &ep->regs->ep_rsp); | |
| } | |
| } | |
| #define ASSERT_OUT_NAKING(ep) assert_out_naking(ep,__FUNCTION__) | |
| #else | |
| #define ASSERT_OUT_NAKING(ep) do {} while (0) | |
| #endif | |
| static inline void stop_out_naking (struct net2280_ep *ep) | |
| { | |
| u32 tmp; | |
| tmp = readl (&ep->regs->ep_stat); | |
| if ((tmp & (1 << NAK_OUT_PACKETS)) != 0) | |
| writel ((1 << CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp); | |
| } | |
| #endif /* __KERNEL__ */ |