| /* | |
| * Copyright (C) 2001-2004 by David Brownell | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY | |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
| * for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software Foundation, | |
| * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| /* this file is part of ehci-hcd.c */ | |
| /*-------------------------------------------------------------------------*/ | |
| /* | |
| * EHCI Root Hub ... the nonsharable stuff | |
| * | |
| * Registers don't need cpu_to_le32, that happens transparently | |
| */ | |
| /*-------------------------------------------------------------------------*/ | |
| #ifdef CONFIG_PM | |
| static int ehci_bus_suspend (struct usb_hcd *hcd) | |
| { | |
| struct ehci_hcd *ehci = hcd_to_ehci (hcd); | |
| int port; | |
| if (time_before (jiffies, ehci->next_statechange)) | |
| msleep(5); | |
| port = HCS_N_PORTS (ehci->hcs_params); | |
| spin_lock_irq (&ehci->lock); | |
| /* stop schedules, clean any completed work */ | |
| if (HC_IS_RUNNING(hcd->state)) { | |
| ehci_quiesce (ehci); | |
| hcd->state = HC_STATE_QUIESCING; | |
| } | |
| ehci->command = readl (&ehci->regs->command); | |
| if (ehci->reclaim) | |
| ehci->reclaim_ready = 1; | |
| ehci_work(ehci); | |
| /* suspend any active/unsuspended ports, maybe allow wakeup */ | |
| while (port--) { | |
| u32 __iomem *reg = &ehci->regs->port_status [port]; | |
| u32 t1 = readl (reg) & ~PORT_RWC_BITS; | |
| u32 t2 = t1; | |
| if ((t1 & PORT_PE) && !(t1 & PORT_OWNER)) | |
| t2 |= PORT_SUSPEND; | |
| if (device_may_wakeup(&hcd->self.root_hub->dev)) | |
| t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E; | |
| else | |
| t2 &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E); | |
| if (t1 != t2) { | |
| ehci_vdbg (ehci, "port %d, %08x -> %08x\n", | |
| port + 1, t1, t2); | |
| writel (t2, reg); | |
| } | |
| } | |
| /* turn off now-idle HC */ | |
| del_timer_sync (&ehci->watchdog); | |
| ehci_halt (ehci); | |
| hcd->state = HC_STATE_SUSPENDED; | |
| ehci->next_statechange = jiffies + msecs_to_jiffies(10); | |
| spin_unlock_irq (&ehci->lock); | |
| return 0; | |
| } | |
| /* caller has locked the root hub, and should reset/reinit on error */ | |
| static int ehci_bus_resume (struct usb_hcd *hcd) | |
| { | |
| struct ehci_hcd *ehci = hcd_to_ehci (hcd); | |
| u32 temp; | |
| int i; | |
| int intr_enable; | |
| if (time_before (jiffies, ehci->next_statechange)) | |
| msleep(5); | |
| spin_lock_irq (&ehci->lock); | |
| /* Ideally and we've got a real resume here, and no port's power | |
| * was lost. (For PCI, that means Vaux was maintained.) But we | |
| * could instead be restoring a swsusp snapshot -- so that BIOS was | |
| * the last user of the controller, not reset/pm hardware keeping | |
| * state we gave to it. | |
| */ | |
| /* re-init operational registers in case we lost power */ | |
| if (readl (&ehci->regs->intr_enable) == 0) { | |
| /* at least some APM implementations will try to deliver | |
| * IRQs right away, so delay them until we're ready. | |
| */ | |
| intr_enable = 1; | |
| writel (0, &ehci->regs->segment); | |
| writel (ehci->periodic_dma, &ehci->regs->frame_list); | |
| writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next); | |
| } else | |
| intr_enable = 0; | |
| ehci_dbg(ehci, "resume root hub%s\n", | |
| intr_enable ? " after power loss" : ""); | |
| /* restore CMD_RUN, framelist size, and irq threshold */ | |
| writel (ehci->command, &ehci->regs->command); | |
| /* take ports out of suspend */ | |
| i = HCS_N_PORTS (ehci->hcs_params); | |
| while (i--) { | |
| temp = readl (&ehci->regs->port_status [i]); | |
| temp &= ~(PORT_RWC_BITS | |
| | PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E); | |
| if (temp & PORT_SUSPEND) { | |
| ehci->reset_done [i] = jiffies + msecs_to_jiffies (20); | |
| temp |= PORT_RESUME; | |
| } | |
| writel (temp, &ehci->regs->port_status [i]); | |
| } | |
| i = HCS_N_PORTS (ehci->hcs_params); | |
| mdelay (20); | |
| while (i--) { | |
| temp = readl (&ehci->regs->port_status [i]); | |
| if ((temp & PORT_SUSPEND) == 0) | |
| continue; | |
| temp &= ~(PORT_RWC_BITS | PORT_RESUME); | |
| writel (temp, &ehci->regs->port_status [i]); | |
| ehci_vdbg (ehci, "resumed port %d\n", i + 1); | |
| } | |
| (void) readl (&ehci->regs->command); | |
| /* maybe re-activate the schedule(s) */ | |
| temp = 0; | |
| if (ehci->async->qh_next.qh) | |
| temp |= CMD_ASE; | |
| if (ehci->periodic_sched) | |
| temp |= CMD_PSE; | |
| if (temp) { | |
| ehci->command |= temp; | |
| writel (ehci->command, &ehci->regs->command); | |
| } | |
| ehci->next_statechange = jiffies + msecs_to_jiffies(5); | |
| hcd->state = HC_STATE_RUNNING; | |
| /* Now we can safely re-enable irqs */ | |
| if (intr_enable) | |
| writel (INTR_MASK, &ehci->regs->intr_enable); | |
| spin_unlock_irq (&ehci->lock); | |
| return 0; | |
| } | |
| #else | |
| #define ehci_bus_suspend NULL | |
| #define ehci_bus_resume NULL | |
| #endif /* CONFIG_PM */ | |
| /*-------------------------------------------------------------------------*/ | |
| static int check_reset_complete ( | |
| struct ehci_hcd *ehci, | |
| int index, | |
| int port_status | |
| ) { | |
| if (!(port_status & PORT_CONNECT)) { | |
| ehci->reset_done [index] = 0; | |
| return port_status; | |
| } | |
| /* if reset finished and it's still not enabled -- handoff */ | |
| if (!(port_status & PORT_PE)) { | |
| /* with integrated TT, there's nobody to hand it to! */ | |
| if (ehci_is_TDI(ehci)) { | |
| ehci_dbg (ehci, | |
| "Failed to enable port %d on root hub TT\n", | |
| index+1); | |
| return port_status; | |
| } | |
| ehci_dbg (ehci, "port %d full speed --> companion\n", | |
| index + 1); | |
| // what happens if HCS_N_CC(params) == 0 ? | |
| port_status |= PORT_OWNER; | |
| port_status &= ~PORT_RWC_BITS; | |
| writel (port_status, &ehci->regs->port_status [index]); | |
| } else | |
| ehci_dbg (ehci, "port %d high speed\n", index + 1); | |
| return port_status; | |
| } | |
| /*-------------------------------------------------------------------------*/ | |
| /* build "status change" packet (one or two bytes) from HC registers */ | |
| static int | |
| ehci_hub_status_data (struct usb_hcd *hcd, char *buf) | |
| { | |
| struct ehci_hcd *ehci = hcd_to_ehci (hcd); | |
| u32 temp, status = 0; | |
| int ports, i, retval = 1; | |
| unsigned long flags; | |
| /* if !USB_SUSPEND, root hub timers won't get shut down ... */ | |
| if (!HC_IS_RUNNING(hcd->state)) | |
| return 0; | |
| /* init status to no-changes */ | |
| buf [0] = 0; | |
| ports = HCS_N_PORTS (ehci->hcs_params); | |
| if (ports > 7) { | |
| buf [1] = 0; | |
| retval++; | |
| } | |
| /* no hub change reports (bit 0) for now (power, ...) */ | |
| /* port N changes (bit N)? */ | |
| spin_lock_irqsave (&ehci->lock, flags); | |
| for (i = 0; i < ports; i++) { | |
| temp = readl (&ehci->regs->port_status [i]); | |
| if (temp & PORT_OWNER) { | |
| /* don't report this in GetPortStatus */ | |
| if (temp & PORT_CSC) { | |
| temp &= ~PORT_RWC_BITS; | |
| temp |= PORT_CSC; | |
| writel (temp, &ehci->regs->port_status [i]); | |
| } | |
| continue; | |
| } | |
| if (!(temp & PORT_CONNECT)) | |
| ehci->reset_done [i] = 0; | |
| if ((temp & (PORT_CSC | PORT_PEC | PORT_OCC)) != 0 | |
| // PORT_STAT_C_SUSPEND? | |
| || ((temp & PORT_RESUME) != 0 | |
| && time_after (jiffies, | |
| ehci->reset_done [i]))) { | |
| if (i < 7) | |
| buf [0] |= 1 << (i + 1); | |
| else | |
| buf [1] |= 1 << (i - 7); | |
| status = STS_PCD; | |
| } | |
| } | |
| /* FIXME autosuspend idle root hubs */ | |
| spin_unlock_irqrestore (&ehci->lock, flags); | |
| return status ? retval : 0; | |
| } | |
| /*-------------------------------------------------------------------------*/ | |
| static void | |
| ehci_hub_descriptor ( | |
| struct ehci_hcd *ehci, | |
| struct usb_hub_descriptor *desc | |
| ) { | |
| int ports = HCS_N_PORTS (ehci->hcs_params); | |
| u16 temp; | |
| desc->bDescriptorType = 0x29; | |
| desc->bPwrOn2PwrGood = 10; /* ehci 1.0, 2.3.9 says 20ms max */ | |
| desc->bHubContrCurrent = 0; | |
| desc->bNbrPorts = ports; | |
| temp = 1 + (ports / 8); | |
| desc->bDescLength = 7 + 2 * temp; | |
| /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ | |
| memset (&desc->bitmap [0], 0, temp); | |
| memset (&desc->bitmap [temp], 0xff, temp); | |
| temp = 0x0008; /* per-port overcurrent reporting */ | |
| if (HCS_PPC (ehci->hcs_params)) | |
| temp |= 0x0001; /* per-port power control */ | |
| else | |
| temp |= 0x0002; /* no power switching */ | |
| #if 0 | |
| // re-enable when we support USB_PORT_FEAT_INDICATOR below. | |
| if (HCS_INDICATOR (ehci->hcs_params)) | |
| temp |= 0x0080; /* per-port indicators (LEDs) */ | |
| #endif | |
| desc->wHubCharacteristics = (__force __u16)cpu_to_le16 (temp); | |
| } | |
| /*-------------------------------------------------------------------------*/ | |
| #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E) | |
| static int ehci_hub_control ( | |
| struct usb_hcd *hcd, | |
| u16 typeReq, | |
| u16 wValue, | |
| u16 wIndex, | |
| char *buf, | |
| u16 wLength | |
| ) { | |
| struct ehci_hcd *ehci = hcd_to_ehci (hcd); | |
| int ports = HCS_N_PORTS (ehci->hcs_params); | |
| u32 temp, status; | |
| unsigned long flags; | |
| int retval = 0; | |
| /* | |
| * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR. | |
| * HCS_INDICATOR may say we can change LEDs to off/amber/green. | |
| * (track current state ourselves) ... blink for diagnostics, | |
| * power, "this is the one", etc. EHCI spec supports this. | |
| */ | |
| spin_lock_irqsave (&ehci->lock, flags); | |
| switch (typeReq) { | |
| case ClearHubFeature: | |
| switch (wValue) { | |
| case C_HUB_LOCAL_POWER: | |
| case C_HUB_OVER_CURRENT: | |
| /* no hub-wide feature/status flags */ | |
| break; | |
| default: | |
| goto error; | |
| } | |
| break; | |
| case ClearPortFeature: | |
| if (!wIndex || wIndex > ports) | |
| goto error; | |
| wIndex--; | |
| temp = readl (&ehci->regs->port_status [wIndex]); | |
| if (temp & PORT_OWNER) | |
| break; | |
| switch (wValue) { | |
| case USB_PORT_FEAT_ENABLE: | |
| writel (temp & ~PORT_PE, | |
| &ehci->regs->port_status [wIndex]); | |
| break; | |
| case USB_PORT_FEAT_C_ENABLE: | |
| writel((temp & ~PORT_RWC_BITS) | PORT_PEC, | |
| &ehci->regs->port_status [wIndex]); | |
| break; | |
| case USB_PORT_FEAT_SUSPEND: | |
| if (temp & PORT_RESET) | |
| goto error; | |
| if (ehci->no_selective_suspend) | |
| break; | |
| if (temp & PORT_SUSPEND) { | |
| if ((temp & PORT_PE) == 0) | |
| goto error; | |
| /* resume signaling for 20 msec */ | |
| temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); | |
| writel (temp | PORT_RESUME, | |
| &ehci->regs->port_status [wIndex]); | |
| ehci->reset_done [wIndex] = jiffies | |
| + msecs_to_jiffies (20); | |
| } | |
| break; | |
| case USB_PORT_FEAT_C_SUSPEND: | |
| /* we auto-clear this feature */ | |
| break; | |
| case USB_PORT_FEAT_POWER: | |
| if (HCS_PPC (ehci->hcs_params)) | |
| writel (temp & ~(PORT_RWC_BITS | PORT_POWER), | |
| &ehci->regs->port_status [wIndex]); | |
| break; | |
| case USB_PORT_FEAT_C_CONNECTION: | |
| writel((temp & ~PORT_RWC_BITS) | PORT_CSC, | |
| &ehci->regs->port_status [wIndex]); | |
| break; | |
| case USB_PORT_FEAT_C_OVER_CURRENT: | |
| writel((temp & ~PORT_RWC_BITS) | PORT_OCC, | |
| &ehci->regs->port_status [wIndex]); | |
| break; | |
| case USB_PORT_FEAT_C_RESET: | |
| /* GetPortStatus clears reset */ | |
| break; | |
| default: | |
| goto error; | |
| } | |
| readl (&ehci->regs->command); /* unblock posted write */ | |
| break; | |
| case GetHubDescriptor: | |
| ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *) | |
| buf); | |
| break; | |
| case GetHubStatus: | |
| /* no hub-wide feature/status flags */ | |
| memset (buf, 0, 4); | |
| //cpu_to_le32s ((u32 *) buf); | |
| break; | |
| case GetPortStatus: | |
| if (!wIndex || wIndex > ports) | |
| goto error; | |
| wIndex--; | |
| status = 0; | |
| temp = readl (&ehci->regs->port_status [wIndex]); | |
| // wPortChange bits | |
| if (temp & PORT_CSC) | |
| status |= 1 << USB_PORT_FEAT_C_CONNECTION; | |
| if (temp & PORT_PEC) | |
| status |= 1 << USB_PORT_FEAT_C_ENABLE; | |
| if (temp & PORT_OCC) | |
| status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT; | |
| /* whoever resumes must GetPortStatus to complete it!! */ | |
| if ((temp & PORT_RESUME) | |
| && time_after (jiffies, | |
| ehci->reset_done [wIndex])) { | |
| status |= 1 << USB_PORT_FEAT_C_SUSPEND; | |
| ehci->reset_done [wIndex] = 0; | |
| /* stop resume signaling */ | |
| temp = readl (&ehci->regs->port_status [wIndex]); | |
| writel (temp & ~(PORT_RWC_BITS | PORT_RESUME), | |
| &ehci->regs->port_status [wIndex]); | |
| retval = handshake ( | |
| &ehci->regs->port_status [wIndex], | |
| PORT_RESUME, 0, 2000 /* 2msec */); | |
| if (retval != 0) { | |
| ehci_err (ehci, "port %d resume error %d\n", | |
| wIndex + 1, retval); | |
| goto error; | |
| } | |
| temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10)); | |
| } | |
| /* whoever resets must GetPortStatus to complete it!! */ | |
| if ((temp & PORT_RESET) | |
| && time_after (jiffies, | |
| ehci->reset_done [wIndex])) { | |
| status |= 1 << USB_PORT_FEAT_C_RESET; | |
| ehci->reset_done [wIndex] = 0; | |
| /* force reset to complete */ | |
| writel (temp & ~(PORT_RWC_BITS | PORT_RESET), | |
| &ehci->regs->port_status [wIndex]); | |
| /* REVISIT: some hardware needs 550+ usec to clear | |
| * this bit; seems too long to spin routinely... | |
| */ | |
| retval = handshake ( | |
| &ehci->regs->port_status [wIndex], | |
| PORT_RESET, 0, 750); | |
| if (retval != 0) { | |
| ehci_err (ehci, "port %d reset error %d\n", | |
| wIndex + 1, retval); | |
| goto error; | |
| } | |
| /* see what we found out */ | |
| temp = check_reset_complete (ehci, wIndex, | |
| readl (&ehci->regs->port_status [wIndex])); | |
| } | |
| // don't show wPortStatus if it's owned by a companion hc | |
| if (!(temp & PORT_OWNER)) { | |
| if (temp & PORT_CONNECT) { | |
| status |= 1 << USB_PORT_FEAT_CONNECTION; | |
| // status may be from integrated TT | |
| status |= ehci_port_speed(ehci, temp); | |
| } | |
| if (temp & PORT_PE) | |
| status |= 1 << USB_PORT_FEAT_ENABLE; | |
| if (temp & (PORT_SUSPEND|PORT_RESUME)) | |
| status |= 1 << USB_PORT_FEAT_SUSPEND; | |
| if (temp & PORT_OC) | |
| status |= 1 << USB_PORT_FEAT_OVER_CURRENT; | |
| if (temp & PORT_RESET) | |
| status |= 1 << USB_PORT_FEAT_RESET; | |
| if (temp & PORT_POWER) | |
| status |= 1 << USB_PORT_FEAT_POWER; | |
| } | |
| #ifndef EHCI_VERBOSE_DEBUG | |
| if (status & ~0xffff) /* only if wPortChange is interesting */ | |
| #endif | |
| dbg_port (ehci, "GetStatus", wIndex + 1, temp); | |
| // we "know" this alignment is good, caller used kmalloc()... | |
| *((__le32 *) buf) = cpu_to_le32 (status); | |
| break; | |
| case SetHubFeature: | |
| switch (wValue) { | |
| case C_HUB_LOCAL_POWER: | |
| case C_HUB_OVER_CURRENT: | |
| /* no hub-wide feature/status flags */ | |
| break; | |
| default: | |
| goto error; | |
| } | |
| break; | |
| case SetPortFeature: | |
| if (!wIndex || wIndex > ports) | |
| goto error; | |
| wIndex--; | |
| temp = readl (&ehci->regs->port_status [wIndex]); | |
| if (temp & PORT_OWNER) | |
| break; | |
| temp &= ~PORT_RWC_BITS; | |
| switch (wValue) { | |
| case USB_PORT_FEAT_SUSPEND: | |
| if (ehci->no_selective_suspend) | |
| break; | |
| if ((temp & PORT_PE) == 0 | |
| || (temp & PORT_RESET) != 0) | |
| goto error; | |
| if (device_may_wakeup(&hcd->self.root_hub->dev)) | |
| temp |= PORT_WAKE_BITS; | |
| writel (temp | PORT_SUSPEND, | |
| &ehci->regs->port_status [wIndex]); | |
| break; | |
| case USB_PORT_FEAT_POWER: | |
| if (HCS_PPC (ehci->hcs_params)) | |
| writel (temp | PORT_POWER, | |
| &ehci->regs->port_status [wIndex]); | |
| break; | |
| case USB_PORT_FEAT_RESET: | |
| if (temp & PORT_RESUME) | |
| goto error; | |
| /* line status bits may report this as low speed, | |
| * which can be fine if this root hub has a | |
| * transaction translator built in. | |
| */ | |
| if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT | |
| && !ehci_is_TDI(ehci) | |
| && PORT_USB11 (temp)) { | |
| ehci_dbg (ehci, | |
| "port %d low speed --> companion\n", | |
| wIndex + 1); | |
| temp |= PORT_OWNER; | |
| } else { | |
| ehci_vdbg (ehci, "port %d reset\n", wIndex + 1); | |
| temp |= PORT_RESET; | |
| temp &= ~PORT_PE; | |
| /* | |
| * caller must wait, then call GetPortStatus | |
| * usb 2.0 spec says 50 ms resets on root | |
| */ | |
| ehci->reset_done [wIndex] = jiffies | |
| + msecs_to_jiffies (50); | |
| } | |
| writel (temp, &ehci->regs->port_status [wIndex]); | |
| break; | |
| default: | |
| goto error; | |
| } | |
| readl (&ehci->regs->command); /* unblock posted writes */ | |
| break; | |
| default: | |
| error: | |
| /* "stall" on error */ | |
| retval = -EPIPE; | |
| } | |
| spin_unlock_irqrestore (&ehci->lock, flags); | |
| return retval; | |
| } |