| /* | |
| * OHCI HCD (Host Controller Driver) for USB. | |
| * | |
| * Copyright (C) 2004 SAN People (Pty) Ltd. | |
| * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> | |
| * | |
| * AT91 Bus Glue | |
| * | |
| * Based on fragments of 2.4 driver by Rick Bronson. | |
| * Based on ohci-omap.c | |
| * | |
| * This file is licenced under the GPL. | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/platform_device.h> | |
| #include <asm/mach-types.h> | |
| #include <asm/hardware.h> | |
| #include <asm/arch/board.h> | |
| #ifndef CONFIG_ARCH_AT91 | |
| #error "CONFIG_ARCH_AT91 must be defined." | |
| #endif | |
| /* interface and function clocks */ | |
| static struct clk *iclk, *fclk; | |
| static int clocked; | |
| extern int usb_disabled(void); | |
| /*-------------------------------------------------------------------------*/ | |
| static void at91_start_hc(struct platform_device *pdev) | |
| { | |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); | |
| struct ohci_regs __iomem *regs = hcd->regs; | |
| dev_dbg(&pdev->dev, "start\n"); | |
| /* | |
| * Start the USB clocks. | |
| */ | |
| clk_enable(iclk); | |
| clk_enable(fclk); | |
| clocked = 1; | |
| /* | |
| * The USB host controller must remain in reset. | |
| */ | |
| writel(0, ®s->control); | |
| } | |
| static void at91_stop_hc(struct platform_device *pdev) | |
| { | |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); | |
| struct ohci_regs __iomem *regs = hcd->regs; | |
| dev_dbg(&pdev->dev, "stop\n"); | |
| /* | |
| * Put the USB host controller into reset. | |
| */ | |
| writel(0, ®s->control); | |
| /* | |
| * Stop the USB clocks. | |
| */ | |
| clk_disable(fclk); | |
| clk_disable(iclk); | |
| clocked = 0; | |
| } | |
| /*-------------------------------------------------------------------------*/ | |
| static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); | |
| /* configure so an HC device and id are always provided */ | |
| /* always called with process context; sleeping is OK */ | |
| /** | |
| * usb_hcd_at91_probe - initialize AT91-based HCDs | |
| * Context: !in_interrupt() | |
| * | |
| * Allocates basic resources for this USB host controller, and | |
| * then invokes the start() method for the HCD associated with it | |
| * through the hotplug entry's driver_data. | |
| */ | |
| static int usb_hcd_at91_probe(const struct hc_driver *driver, | |
| struct platform_device *pdev) | |
| { | |
| int retval; | |
| struct usb_hcd *hcd = NULL; | |
| if (pdev->num_resources != 2) { | |
| pr_debug("hcd probe: invalid num_resources"); | |
| return -ENODEV; | |
| } | |
| if ((pdev->resource[0].flags != IORESOURCE_MEM) | |
| || (pdev->resource[1].flags != IORESOURCE_IRQ)) { | |
| pr_debug("hcd probe: invalid resource type\n"); | |
| return -ENODEV; | |
| } | |
| hcd = usb_create_hcd(driver, &pdev->dev, "at91"); | |
| if (!hcd) | |
| return -ENOMEM; | |
| hcd->rsrc_start = pdev->resource[0].start; | |
| hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; | |
| if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { | |
| pr_debug("request_mem_region failed\n"); | |
| retval = -EBUSY; | |
| goto err1; | |
| } | |
| hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); | |
| if (!hcd->regs) { | |
| pr_debug("ioremap failed\n"); | |
| retval = -EIO; | |
| goto err2; | |
| } | |
| iclk = clk_get(&pdev->dev, "ohci_clk"); | |
| fclk = clk_get(&pdev->dev, "uhpck"); | |
| at91_start_hc(pdev); | |
| ohci_hcd_init(hcd_to_ohci(hcd)); | |
| retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED); | |
| if (retval == 0) | |
| return retval; | |
| /* Error handling */ | |
| at91_stop_hc(pdev); | |
| clk_put(fclk); | |
| clk_put(iclk); | |
| iounmap(hcd->regs); | |
| err2: | |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); | |
| err1: | |
| usb_put_hcd(hcd); | |
| return retval; | |
| } | |
| /* may be called with controller, bus, and devices active */ | |
| /** | |
| * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs | |
| * @dev: USB Host Controller being removed | |
| * Context: !in_interrupt() | |
| * | |
| * Reverses the effect of usb_hcd_at91_probe(), first invoking | |
| * the HCD's stop() method. It is always called from a thread | |
| * context, "rmmod" or something similar. | |
| * | |
| */ | |
| static int usb_hcd_at91_remove(struct usb_hcd *hcd, | |
| struct platform_device *pdev) | |
| { | |
| usb_remove_hcd(hcd); | |
| at91_stop_hc(pdev); | |
| iounmap(hcd->regs); | |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); | |
| disable_irq_wake(hcd->irq); | |
| clk_put(fclk); | |
| clk_put(iclk); | |
| fclk = iclk = NULL; | |
| dev_set_drvdata(&pdev->dev, NULL); | |
| return 0; | |
| } | |
| /*-------------------------------------------------------------------------*/ | |
| static int __devinit | |
| ohci_at91_start (struct usb_hcd *hcd) | |
| { | |
| struct at91_usbh_data *board = hcd->self.controller->platform_data; | |
| struct ohci_hcd *ohci = hcd_to_ohci (hcd); | |
| struct usb_device *root = hcd->self.root_hub; | |
| int ret; | |
| if ((ret = ohci_init(ohci)) < 0) | |
| return ret; | |
| ohci->num_ports = board->ports; | |
| if ((ret = ohci_run(ohci)) < 0) { | |
| err("can't start %s", hcd->self.bus_name); | |
| ohci_stop(hcd); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| /*-------------------------------------------------------------------------*/ | |
| static const struct hc_driver ohci_at91_hc_driver = { | |
| .description = hcd_name, | |
| .product_desc = "AT91 OHCI", | |
| .hcd_priv_size = sizeof(struct ohci_hcd), | |
| /* | |
| * generic hardware linkage | |
| */ | |
| .irq = ohci_irq, | |
| .flags = HCD_USB11 | HCD_MEMORY, | |
| /* | |
| * basic lifecycle operations | |
| */ | |
| .start = ohci_at91_start, | |
| .stop = ohci_stop, | |
| .shutdown = ohci_shutdown, | |
| /* | |
| * managing i/o requests and associated device resources | |
| */ | |
| .urb_enqueue = ohci_urb_enqueue, | |
| .urb_dequeue = ohci_urb_dequeue, | |
| .endpoint_disable = ohci_endpoint_disable, | |
| /* | |
| * scheduling support | |
| */ | |
| .get_frame_number = ohci_get_frame, | |
| /* | |
| * root hub support | |
| */ | |
| .hub_status_data = ohci_hub_status_data, | |
| .hub_control = ohci_hub_control, | |
| .hub_irq_enable = ohci_rhsc_enable, | |
| #ifdef CONFIG_PM | |
| .bus_suspend = ohci_bus_suspend, | |
| .bus_resume = ohci_bus_resume, | |
| #endif | |
| .start_port_reset = ohci_start_port_reset, | |
| }; | |
| /*-------------------------------------------------------------------------*/ | |
| static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) | |
| { | |
| device_init_wakeup(&pdev->dev, 1); | |
| return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev); | |
| } | |
| static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) | |
| { | |
| device_init_wakeup(&pdev->dev, 0); | |
| return usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev); | |
| } | |
| #ifdef CONFIG_PM | |
| static int | |
| ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg) | |
| { | |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); | |
| struct ohci_hcd *ohci = hcd_to_ohci(hcd); | |
| if (device_may_wakeup(&pdev->dev)) | |
| enable_irq_wake(hcd->irq); | |
| else | |
| disable_irq_wake(hcd->irq); | |
| /* | |
| * The integrated transceivers seem unable to notice disconnect, | |
| * reconnect, or wakeup without the 48 MHz clock active. so for | |
| * correctness, always discard connection state (using reset). | |
| * | |
| * REVISIT: some boards will be able to turn VBUS off... | |
| */ | |
| if (at91_suspend_entering_slow_clock()) { | |
| ohci_usb_reset (ohci); | |
| clk_disable(fclk); | |
| clk_disable(iclk); | |
| clocked = 0; | |
| } | |
| return 0; | |
| } | |
| static int ohci_hcd_at91_drv_resume(struct platform_device *pdev) | |
| { | |
| if (!clocked) { | |
| clk_enable(iclk); | |
| clk_enable(fclk); | |
| clocked = 1; | |
| } | |
| return 0; | |
| } | |
| #else | |
| #define ohci_hcd_at91_drv_suspend NULL | |
| #define ohci_hcd_at91_drv_resume NULL | |
| #endif | |
| MODULE_ALIAS("at91_ohci"); | |
| static struct platform_driver ohci_hcd_at91_driver = { | |
| .probe = ohci_hcd_at91_drv_probe, | |
| .remove = ohci_hcd_at91_drv_remove, | |
| .shutdown = usb_hcd_platform_shutdown, | |
| .suspend = ohci_hcd_at91_drv_suspend, | |
| .resume = ohci_hcd_at91_drv_resume, | |
| .driver = { | |
| .name = "at91_ohci", | |
| .owner = THIS_MODULE, | |
| }, | |
| }; | |
| static int __init ohci_hcd_at91_init (void) | |
| { | |
| if (usb_disabled()) | |
| return -ENODEV; | |
| return platform_driver_register(&ohci_hcd_at91_driver); | |
| } | |
| static void __exit ohci_hcd_at91_cleanup (void) | |
| { | |
| platform_driver_unregister(&ohci_hcd_at91_driver); | |
| } | |
| module_init (ohci_hcd_at91_init); | |
| module_exit (ohci_hcd_at91_cleanup); |