| /* | |
| * Support for the Maxtor OneTouch USB hard drive's button | |
| * | |
| * Current development and maintenance by: | |
| * Copyright (c) 2005 Nick Sillik <n.sillik@temple.edu> | |
| * | |
| * Initial work by: | |
| * Copyright (c) 2003 Erik Thyren <erth7411@student.uu.se> | |
| * | |
| * Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann) | |
| * | |
| */ | |
| /* | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/input.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #include <linux/usb_ch9.h> | |
| #include <linux/usb/input.h> | |
| #include "usb.h" | |
| #include "onetouch.h" | |
| #include "debug.h" | |
| void onetouch_release_input(void *onetouch_); | |
| struct usb_onetouch { | |
| char name[128]; | |
| char phys[64]; | |
| struct input_dev *dev; /* input device interface */ | |
| struct usb_device *udev; /* usb device */ | |
| struct urb *irq; /* urb for interrupt in report */ | |
| unsigned char *data; /* input data */ | |
| dma_addr_t data_dma; | |
| unsigned int is_open:1; | |
| }; | |
| static void usb_onetouch_irq(struct urb *urb) | |
| { | |
| struct usb_onetouch *onetouch = urb->context; | |
| signed char *data = onetouch->data; | |
| struct input_dev *dev = onetouch->dev; | |
| int status; | |
| switch (urb->status) { | |
| case 0: /* success */ | |
| break; | |
| case -ECONNRESET: /* unlink */ | |
| case -ENOENT: | |
| case -ESHUTDOWN: | |
| return; | |
| /* -EPIPE: should clear the halt */ | |
| default: /* error */ | |
| goto resubmit; | |
| } | |
| input_report_key(dev, ONETOUCH_BUTTON, data[0] & 0x02); | |
| input_sync(dev); | |
| resubmit: | |
| status = usb_submit_urb (urb, SLAB_ATOMIC); | |
| if (status) | |
| err ("can't resubmit intr, %s-%s/input0, status %d", | |
| onetouch->udev->bus->bus_name, | |
| onetouch->udev->devpath, status); | |
| } | |
| static int usb_onetouch_open(struct input_dev *dev) | |
| { | |
| struct usb_onetouch *onetouch = dev->private; | |
| onetouch->is_open = 1; | |
| onetouch->irq->dev = onetouch->udev; | |
| if (usb_submit_urb(onetouch->irq, GFP_KERNEL)) { | |
| err("usb_submit_urb failed"); | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| static void usb_onetouch_close(struct input_dev *dev) | |
| { | |
| struct usb_onetouch *onetouch = dev->private; | |
| usb_kill_urb(onetouch->irq); | |
| onetouch->is_open = 0; | |
| } | |
| #ifdef CONFIG_PM | |
| static void usb_onetouch_pm_hook(struct us_data *us, int action) | |
| { | |
| struct usb_onetouch *onetouch = (struct usb_onetouch *) us->extra; | |
| if (onetouch->is_open) { | |
| switch (action) { | |
| case US_SUSPEND: | |
| usb_kill_urb(onetouch->irq); | |
| break; | |
| case US_RESUME: | |
| if (usb_submit_urb(onetouch->irq, GFP_KERNEL) != 0) | |
| err("usb_submit_urb failed"); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| } | |
| #endif /* CONFIG_PM */ | |
| int onetouch_connect_input(struct us_data *ss) | |
| { | |
| struct usb_device *udev = ss->pusb_dev; | |
| struct usb_host_interface *interface; | |
| struct usb_endpoint_descriptor *endpoint; | |
| struct usb_onetouch *onetouch; | |
| struct input_dev *input_dev; | |
| int pipe, maxp; | |
| int error = -ENOMEM; | |
| interface = ss->pusb_intf->cur_altsetting; | |
| if (interface->desc.bNumEndpoints != 3) | |
| return -ENODEV; | |
| endpoint = &interface->endpoint[2].desc; | |
| if (!(endpoint->bEndpointAddress & USB_DIR_IN)) | |
| return -ENODEV; | |
| if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) | |
| != USB_ENDPOINT_XFER_INT) | |
| return -ENODEV; | |
| pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); | |
| maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); | |
| onetouch = kzalloc(sizeof(struct usb_onetouch), GFP_KERNEL); | |
| input_dev = input_allocate_device(); | |
| if (!onetouch || !input_dev) | |
| goto fail1; | |
| onetouch->data = usb_buffer_alloc(udev, ONETOUCH_PKT_LEN, | |
| SLAB_ATOMIC, &onetouch->data_dma); | |
| if (!onetouch->data) | |
| goto fail1; | |
| onetouch->irq = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!onetouch->irq) | |
| goto fail2; | |
| onetouch->udev = udev; | |
| onetouch->dev = input_dev; | |
| if (udev->manufacturer) | |
| strlcpy(onetouch->name, udev->manufacturer, | |
| sizeof(onetouch->name)); | |
| if (udev->product) { | |
| if (udev->manufacturer) | |
| strlcat(onetouch->name, " ", sizeof(onetouch->name)); | |
| strlcat(onetouch->name, udev->product, sizeof(onetouch->name)); | |
| } | |
| if (!strlen(onetouch->name)) | |
| snprintf(onetouch->name, sizeof(onetouch->name), | |
| "Maxtor Onetouch %04x:%04x", | |
| le16_to_cpu(udev->descriptor.idVendor), | |
| le16_to_cpu(udev->descriptor.idProduct)); | |
| usb_make_path(udev, onetouch->phys, sizeof(onetouch->phys)); | |
| strlcat(onetouch->phys, "/input0", sizeof(onetouch->phys)); | |
| input_dev->name = onetouch->name; | |
| input_dev->phys = onetouch->phys; | |
| usb_to_input_id(udev, &input_dev->id); | |
| input_dev->cdev.dev = &udev->dev; | |
| set_bit(EV_KEY, input_dev->evbit); | |
| set_bit(ONETOUCH_BUTTON, input_dev->keybit); | |
| clear_bit(0, input_dev->keybit); | |
| input_dev->private = onetouch; | |
| input_dev->open = usb_onetouch_open; | |
| input_dev->close = usb_onetouch_close; | |
| usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data, | |
| (maxp > 8 ? 8 : maxp), | |
| usb_onetouch_irq, onetouch, endpoint->bInterval); | |
| onetouch->irq->transfer_dma = onetouch->data_dma; | |
| onetouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | |
| ss->extra_destructor = onetouch_release_input; | |
| ss->extra = onetouch; | |
| #ifdef CONFIG_PM | |
| ss->suspend_resume_hook = usb_onetouch_pm_hook; | |
| #endif | |
| error = input_register_device(onetouch->dev); | |
| if (error) | |
| goto fail3; | |
| return 0; | |
| fail3: usb_free_urb(onetouch->irq); | |
| fail2: usb_buffer_free(udev, ONETOUCH_PKT_LEN, | |
| onetouch->data, onetouch->data_dma); | |
| fail1: kfree(onetouch); | |
| input_free_device(input_dev); | |
| return error; | |
| } | |
| void onetouch_release_input(void *onetouch_) | |
| { | |
| struct usb_onetouch *onetouch = (struct usb_onetouch *) onetouch_; | |
| if (onetouch) { | |
| usb_kill_urb(onetouch->irq); | |
| input_unregister_device(onetouch->dev); | |
| usb_free_urb(onetouch->irq); | |
| usb_buffer_free(onetouch->udev, ONETOUCH_PKT_LEN, | |
| onetouch->data, onetouch->data_dma); | |
| } | |
| } |