| /* | |
| * | |
| * tdfxfb.c | |
| * | |
| * Author: Hannu Mallat <hmallat@cc.hut.fi> | |
| * | |
| * Copyright © 1999 Hannu Mallat | |
| * All rights reserved | |
| * | |
| * Created : Thu Sep 23 18:17:43 1999, hmallat | |
| * Last modified: Tue Nov 2 21:19:47 1999, hmallat | |
| * | |
| * Lots of the information here comes from the Daryll Strauss' Banshee | |
| * patches to the XF86 server, and the rest comes from the 3dfx | |
| * Banshee specification. I'm very much indebted to Daryll for his | |
| * work on the X server. | |
| * | |
| * Voodoo3 support was contributed Harold Oga. Lots of additions | |
| * (proper acceleration, 24 bpp, hardware cursor) and bug fixes by Attila | |
| * Kesmarki. Thanks guys! | |
| * | |
| * Voodoo1 and Voodoo2 support aren't relevant to this driver as they | |
| * behave very differently from the Voodoo3/4/5. For anyone wanting to | |
| * use frame buffer on the Voodoo1/2, see the sstfb driver (which is | |
| * located at http://www.sourceforge.net/projects/sstfb). | |
| * | |
| * While I _am_ grateful to 3Dfx for releasing the specs for Banshee, | |
| * I do wish the next version is a bit more complete. Without the XF86 | |
| * patches I couldn't have gotten even this far... for instance, the | |
| * extensions to the VGA register set go completely unmentioned in the | |
| * spec! Also, lots of references are made to the 'SST core', but no | |
| * spec is publicly available, AFAIK. | |
| * | |
| * The structure of this driver comes pretty much from the Permedia | |
| * driver by Ilario Nardinocchi, which in turn is based on skeletonfb. | |
| * | |
| * TODO: | |
| * - support for 16/32 bpp needs fixing (funky bootup penguin) | |
| * - multihead support (basically need to support an array of fb_infos) | |
| * - support other architectures (PPC, Alpha); does the fact that the VGA | |
| * core can be accessed only thru I/O (not memory mapped) complicate | |
| * things? | |
| * | |
| * Version history: | |
| * | |
| * 0.1.4 (released 2002-05-28) ported over to new fbdev api by James Simmons | |
| * | |
| * 0.1.3 (released 1999-11-02) added Attila's panning support, code | |
| * reorg, hwcursor address page size alignment | |
| * (for mmaping both frame buffer and regs), | |
| * and my changes to get rid of hardcoded | |
| * VGA i/o register locations (uses PCI | |
| * configuration info now) | |
| * 0.1.2 (released 1999-10-19) added Attila Kesmarki's bug fixes and | |
| * improvements | |
| * 0.1.1 (released 1999-10-07) added Voodoo3 support by Harold Oga. | |
| * 0.1.0 (released 1999-10-06) initial version | |
| * | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/string.h> | |
| #include <linux/mm.h> | |
| #include <linux/slab.h> | |
| #include <linux/delay.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/fb.h> | |
| #include <linux/init.h> | |
| #include <linux/pci.h> | |
| #include <linux/nvram.h> | |
| #include <asm/io.h> | |
| #include <linux/timer.h> | |
| #include <linux/spinlock.h> | |
| #include <video/tdfx.h> | |
| #undef TDFXFB_DEBUG | |
| #ifdef TDFXFB_DEBUG | |
| #define DPRINTK(a,b...) printk(KERN_DEBUG "fb: %s: " a, __FUNCTION__ , ## b) | |
| #else | |
| #define DPRINTK(a,b...) | |
| #endif | |
| #define BANSHEE_MAX_PIXCLOCK 270000 | |
| #define VOODOO3_MAX_PIXCLOCK 300000 | |
| #define VOODOO5_MAX_PIXCLOCK 350000 | |
| static struct fb_fix_screeninfo tdfx_fix __devinitdata = { | |
| .id = "3Dfx", | |
| .type = FB_TYPE_PACKED_PIXELS, | |
| .visual = FB_VISUAL_PSEUDOCOLOR, | |
| .ypanstep = 1, | |
| .ywrapstep = 1, | |
| .accel = FB_ACCEL_3DFX_BANSHEE | |
| }; | |
| static struct fb_var_screeninfo tdfx_var __devinitdata = { | |
| /* "640x480, 8 bpp @ 60 Hz */ | |
| .xres = 640, | |
| .yres = 480, | |
| .xres_virtual = 640, | |
| .yres_virtual = 1024, | |
| .bits_per_pixel =8, | |
| .red = {0, 8, 0}, | |
| .blue = {0, 8, 0}, | |
| .green = {0, 8, 0}, | |
| .activate = FB_ACTIVATE_NOW, | |
| .height = -1, | |
| .width = -1, | |
| .accel_flags = FB_ACCELF_TEXT, | |
| .pixclock = 39722, | |
| .left_margin = 40, | |
| .right_margin = 24, | |
| .upper_margin = 32, | |
| .lower_margin = 11, | |
| .hsync_len = 96, | |
| .vsync_len = 2, | |
| .vmode = FB_VMODE_NONINTERLACED | |
| }; | |
| /* | |
| * PCI driver prototypes | |
| */ | |
| static int __devinit tdfxfb_probe(struct pci_dev *pdev, | |
| const struct pci_device_id *id); | |
| static void __devexit tdfxfb_remove(struct pci_dev *pdev); | |
| static struct pci_device_id tdfxfb_id_table[] = { | |
| { PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_BANSHEE, | |
| PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16, | |
| 0xff0000, 0 }, | |
| { PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO3, | |
| PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16, | |
| 0xff0000, 0 }, | |
| { PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO5, | |
| PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16, | |
| 0xff0000, 0 }, | |
| { 0, } | |
| }; | |
| static struct pci_driver tdfxfb_driver = { | |
| .name = "tdfxfb", | |
| .id_table = tdfxfb_id_table, | |
| .probe = tdfxfb_probe, | |
| .remove = __devexit_p(tdfxfb_remove), | |
| }; | |
| MODULE_DEVICE_TABLE(pci, tdfxfb_id_table); | |
| /* | |
| * Frame buffer device API | |
| */ | |
| static int tdfxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fb); | |
| static int tdfxfb_set_par(struct fb_info *info); | |
| static int tdfxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | |
| u_int transp, struct fb_info *info); | |
| static int tdfxfb_blank(int blank, struct fb_info *info); | |
| static int tdfxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info); | |
| static int banshee_wait_idle(struct fb_info *info); | |
| #ifdef CONFIG_FB_3DFX_ACCEL | |
| static void tdfxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect); | |
| static void tdfxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area); | |
| static void tdfxfb_imageblit(struct fb_info *info, const struct fb_image *image); | |
| #endif /* CONFIG_FB_3DFX_ACCEL */ | |
| static struct fb_ops tdfxfb_ops = { | |
| .owner = THIS_MODULE, | |
| .fb_check_var = tdfxfb_check_var, | |
| .fb_set_par = tdfxfb_set_par, | |
| .fb_setcolreg = tdfxfb_setcolreg, | |
| .fb_blank = tdfxfb_blank, | |
| .fb_pan_display = tdfxfb_pan_display, | |
| .fb_sync = banshee_wait_idle, | |
| #ifdef CONFIG_FB_3DFX_ACCEL | |
| .fb_fillrect = tdfxfb_fillrect, | |
| .fb_copyarea = tdfxfb_copyarea, | |
| .fb_imageblit = tdfxfb_imageblit, | |
| #else | |
| .fb_fillrect = cfb_fillrect, | |
| .fb_copyarea = cfb_copyarea, | |
| .fb_imageblit = cfb_imageblit, | |
| #endif | |
| }; | |
| /* | |
| * do_xxx: Hardware-specific functions | |
| */ | |
| static u32 do_calc_pll(int freq, int *freq_out); | |
| static void do_write_regs(struct fb_info *info, struct banshee_reg *reg); | |
| static unsigned long do_lfb_size(struct tdfx_par *par, unsigned short); | |
| /* | |
| * Driver data | |
| */ | |
| static int nopan = 0; | |
| static int nowrap = 1; // not implemented (yet) | |
| static char *mode_option __devinitdata = NULL; | |
| /* ------------------------------------------------------------------------- | |
| * Hardware-specific funcions | |
| * ------------------------------------------------------------------------- */ | |
| #ifdef VGA_REG_IO | |
| static inline u8 vga_inb(struct tdfx_par *par, u32 reg) { return inb(reg); } | |
| static inline void vga_outb(struct tdfx_par *par, u32 reg, u8 val) { outb(val, reg); } | |
| #else | |
| static inline u8 vga_inb(struct tdfx_par *par, u32 reg) { | |
| return inb(par->iobase + reg - 0x300); | |
| } | |
| static inline void vga_outb(struct tdfx_par *par, u32 reg, u8 val) { | |
| outb(val, par->iobase + reg - 0x300); | |
| } | |
| #endif | |
| static inline void gra_outb(struct tdfx_par *par, u32 idx, u8 val) { | |
| vga_outb(par, GRA_I, idx); vga_outb(par, GRA_D, val); | |
| } | |
| static inline void seq_outb(struct tdfx_par *par, u32 idx, u8 val) { | |
| vga_outb(par, SEQ_I, idx); vga_outb(par, SEQ_D, val); | |
| } | |
| static inline u8 seq_inb(struct tdfx_par *par, u32 idx) { | |
| vga_outb(par, SEQ_I, idx); return vga_inb(par, SEQ_D); | |
| } | |
| static inline void crt_outb(struct tdfx_par *par, u32 idx, u8 val) { | |
| vga_outb(par, CRT_I, idx); vga_outb(par, CRT_D, val); | |
| } | |
| static inline u8 crt_inb(struct tdfx_par *par, u32 idx) { | |
| vga_outb(par, CRT_I, idx); return vga_inb(par, CRT_D); | |
| } | |
| static inline void att_outb(struct tdfx_par *par, u32 idx, u8 val) | |
| { | |
| unsigned char tmp; | |
| tmp = vga_inb(par, IS1_R); | |
| vga_outb(par, ATT_IW, idx); | |
| vga_outb(par, ATT_IW, val); | |
| } | |
| static inline void vga_disable_video(struct tdfx_par *par) | |
| { | |
| unsigned char s; | |
| s = seq_inb(par, 0x01) | 0x20; | |
| seq_outb(par, 0x00, 0x01); | |
| seq_outb(par, 0x01, s); | |
| seq_outb(par, 0x00, 0x03); | |
| } | |
| static inline void vga_enable_video(struct tdfx_par *par) | |
| { | |
| unsigned char s; | |
| s = seq_inb(par, 0x01) & 0xdf; | |
| seq_outb(par, 0x00, 0x01); | |
| seq_outb(par, 0x01, s); | |
| seq_outb(par, 0x00, 0x03); | |
| } | |
| static inline void vga_enable_palette(struct tdfx_par *par) | |
| { | |
| vga_inb(par, IS1_R); | |
| vga_outb(par, ATT_IW, 0x20); | |
| } | |
| static inline u32 tdfx_inl(struct tdfx_par *par, unsigned int reg) | |
| { | |
| return readl(par->regbase_virt + reg); | |
| } | |
| static inline void tdfx_outl(struct tdfx_par *par, unsigned int reg, u32 val) | |
| { | |
| writel(val, par->regbase_virt + reg); | |
| } | |
| static inline void banshee_make_room(struct tdfx_par *par, int size) | |
| { | |
| /* Note: The Voodoo3's onboard FIFO has 32 slots. This loop | |
| * won't quit if you ask for more. */ | |
| while((tdfx_inl(par, STATUS) & 0x1f) < size-1); | |
| } | |
| static int banshee_wait_idle(struct fb_info *info) | |
| { | |
| struct tdfx_par *par = info->par; | |
| int i = 0; | |
| banshee_make_room(par, 1); | |
| tdfx_outl(par, COMMAND_3D, COMMAND_3D_NOP); | |
| while(1) { | |
| i = (tdfx_inl(par, STATUS) & STATUS_BUSY) ? 0 : i + 1; | |
| if(i == 3) break; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Set the color of a palette entry in 8bpp mode | |
| */ | |
| static inline void do_setpalentry(struct tdfx_par *par, unsigned regno, u32 c) | |
| { | |
| banshee_make_room(par, 2); | |
| tdfx_outl(par, DACADDR, regno); | |
| tdfx_outl(par, DACDATA, c); | |
| } | |
| static u32 do_calc_pll(int freq, int* freq_out) | |
| { | |
| int m, n, k, best_m, best_n, best_k, best_error; | |
| int fref = 14318; | |
| best_error = freq; | |
| best_n = best_m = best_k = 0; | |
| for (k = 3; k >= 0; k--) { | |
| for (m = 63; m >= 0; m--) { | |
| /* | |
| * Estimate value of n that produces target frequency | |
| * with current m and k | |
| */ | |
| int n_estimated = (freq * (m + 2) * (1 << k) / fref) - 2; | |
| /* Search neighborhood of estimated n */ | |
| for (n = max(0, n_estimated - 1); | |
| n <= min(255, n_estimated + 1); n++) { | |
| /* | |
| * Calculate PLL freqency with current m, k and | |
| * estimated n | |
| */ | |
| int f = fref * (n + 2) / (m + 2) / (1 << k); | |
| int error = abs (f - freq); | |
| /* | |
| * If this is the closest we've come to the | |
| * target frequency then remember n, m and k | |
| */ | |
| if (error < best_error) { | |
| best_error = error; | |
| best_n = n; | |
| best_m = m; | |
| best_k = k; | |
| } | |
| } | |
| } | |
| } | |
| n = best_n; | |
| m = best_m; | |
| k = best_k; | |
| *freq_out = fref*(n + 2)/(m + 2)/(1 << k); | |
| return (n << 8) | (m << 2) | k; | |
| } | |
| static void do_write_regs(struct fb_info *info, struct banshee_reg* reg) | |
| { | |
| struct tdfx_par *par = info->par; | |
| int i; | |
| banshee_wait_idle(info); | |
| tdfx_outl(par, MISCINIT1, tdfx_inl(par, MISCINIT1) | 0x01); | |
| crt_outb(par, 0x11, crt_inb(par, 0x11) & 0x7f); /* CRT unprotect */ | |
| banshee_make_room(par, 3); | |
| tdfx_outl(par, VGAINIT1, reg->vgainit1 & 0x001FFFFF); | |
| tdfx_outl(par, VIDPROCCFG, reg->vidcfg & ~0x00000001); | |
| #if 0 | |
| tdfx_outl(par, PLLCTRL1, reg->mempll); | |
| tdfx_outl(par, PLLCTRL2, reg->gfxpll); | |
| #endif | |
| tdfx_outl(par, PLLCTRL0, reg->vidpll); | |
| vga_outb(par, MISC_W, reg->misc[0x00] | 0x01); | |
| for (i = 0; i < 5; i++) | |
| seq_outb(par, i, reg->seq[i]); | |
| for (i = 0; i < 25; i++) | |
| crt_outb(par, i, reg->crt[i]); | |
| for (i = 0; i < 9; i++) | |
| gra_outb(par, i, reg->gra[i]); | |
| for (i = 0; i < 21; i++) | |
| att_outb(par, i, reg->att[i]); | |
| crt_outb(par, 0x1a, reg->ext[0]); | |
| crt_outb(par, 0x1b, reg->ext[1]); | |
| vga_enable_palette(par); | |
| vga_enable_video(par); | |
| banshee_make_room(par, 11); | |
| tdfx_outl(par, VGAINIT0, reg->vgainit0); | |
| tdfx_outl(par, DACMODE, reg->dacmode); | |
| tdfx_outl(par, VIDDESKSTRIDE, reg->stride); | |
| tdfx_outl(par, HWCURPATADDR, 0); | |
| tdfx_outl(par, VIDSCREENSIZE,reg->screensize); | |
| tdfx_outl(par, VIDDESKSTART, reg->startaddr); | |
| tdfx_outl(par, VIDPROCCFG, reg->vidcfg); | |
| tdfx_outl(par, VGAINIT1, reg->vgainit1); | |
| tdfx_outl(par, MISCINIT0, reg->miscinit0); | |
| banshee_make_room(par, 8); | |
| tdfx_outl(par, SRCBASE, reg->srcbase); | |
| tdfx_outl(par, DSTBASE, reg->dstbase); | |
| tdfx_outl(par, COMMANDEXTRA_2D, 0); | |
| tdfx_outl(par, CLIP0MIN, 0); | |
| tdfx_outl(par, CLIP0MAX, 0x0fff0fff); | |
| tdfx_outl(par, CLIP1MIN, 0); | |
| tdfx_outl(par, CLIP1MAX, 0x0fff0fff); | |
| tdfx_outl(par, SRCXY, 0); | |
| banshee_wait_idle(info); | |
| } | |
| static unsigned long do_lfb_size(struct tdfx_par *par, unsigned short dev_id) | |
| { | |
| u32 draminit0; | |
| u32 draminit1; | |
| u32 miscinit1; | |
| int num_chips; | |
| int chip_size; /* in MB */ | |
| u32 lfbsize; | |
| int has_sgram; | |
| draminit0 = tdfx_inl(par, DRAMINIT0); | |
| draminit1 = tdfx_inl(par, DRAMINIT1); | |
| num_chips = (draminit0 & DRAMINIT0_SGRAM_NUM) ? 8 : 4; | |
| if (dev_id < PCI_DEVICE_ID_3DFX_VOODOO5) { | |
| /* Banshee/Voodoo3 */ | |
| has_sgram = draminit1 & DRAMINIT1_MEM_SDRAM; | |
| chip_size = has_sgram ? ((draminit0 & DRAMINIT0_SGRAM_TYPE) ? 2 : 1) | |
| : 2; | |
| } else { | |
| /* Voodoo4/5 */ | |
| has_sgram = 0; | |
| chip_size = 1 << ((draminit0 & DRAMINIT0_SGRAM_TYPE_MASK) >> DRAMINIT0_SGRAM_TYPE_SHIFT); | |
| } | |
| lfbsize = num_chips * chip_size * 1024 * 1024; | |
| /* disable block writes for SDRAM */ | |
| miscinit1 = tdfx_inl(par, MISCINIT1); | |
| miscinit1 |= has_sgram ? 0 : MISCINIT1_2DBLOCK_DIS; | |
| miscinit1 |= MISCINIT1_CLUT_INV; | |
| banshee_make_room(par, 1); | |
| tdfx_outl(par, MISCINIT1, miscinit1); | |
| return lfbsize; | |
| } | |
| /* ------------------------------------------------------------------------- */ | |
| static int tdfxfb_check_var(struct fb_var_screeninfo *var,struct fb_info *info) | |
| { | |
| struct tdfx_par *par = info->par; | |
| u32 lpitch; | |
| if (var->bits_per_pixel != 8 && var->bits_per_pixel != 16 && | |
| var->bits_per_pixel != 24 && var->bits_per_pixel != 32) { | |
| DPRINTK("depth not supported: %u\n", var->bits_per_pixel); | |
| return -EINVAL; | |
| } | |
| if (var->xres != var->xres_virtual) | |
| var->xres_virtual = var->xres; | |
| if (var->yres > var->yres_virtual) | |
| var->yres_virtual = var->yres; | |
| if (var->xoffset) { | |
| DPRINTK("xoffset not supported\n"); | |
| return -EINVAL; | |
| } | |
| /* Banshee doesn't support interlace, but Voodoo4/5 and probably Voodoo3 do. */ | |
| /* no direct information about device id now? use max_pixclock for this... */ | |
| if (((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) && | |
| (par->max_pixclock < VOODOO3_MAX_PIXCLOCK)) { | |
| DPRINTK("interlace not supported\n"); | |
| return -EINVAL; | |
| } | |
| var->xres = (var->xres + 15) & ~15; /* could sometimes be 8 */ | |
| lpitch = var->xres * ((var->bits_per_pixel + 7)>>3); | |
| if (var->xres < 320 || var->xres > 2048) { | |
| DPRINTK("width not supported: %u\n", var->xres); | |
| return -EINVAL; | |
| } | |
| if (var->yres < 200 || var->yres > 2048) { | |
| DPRINTK("height not supported: %u\n", var->yres); | |
| return -EINVAL; | |
| } | |
| if (lpitch * var->yres_virtual > info->fix.smem_len) { | |
| var->yres_virtual = info->fix.smem_len/lpitch; | |
| if (var->yres_virtual < var->yres) { | |
| DPRINTK("no memory for screen (%ux%ux%u)\n", | |
| var->xres, var->yres_virtual, var->bits_per_pixel); | |
| return -EINVAL; | |
| } | |
| } | |
| if (PICOS2KHZ(var->pixclock) > par->max_pixclock) { | |
| DPRINTK("pixclock too high (%ldKHz)\n",PICOS2KHZ(var->pixclock)); | |
| return -EINVAL; | |
| } | |
| switch(var->bits_per_pixel) { | |
| case 8: | |
| var->red.length = var->green.length = var->blue.length = 8; | |
| break; | |
| case 16: | |
| var->red.offset = 11; | |
| var->red.length = 5; | |
| var->green.offset = 5; | |
| var->green.length = 6; | |
| var->blue.offset = 0; | |
| var->blue.length = 5; | |
| break; | |
| case 24: | |
| var->red.offset=16; | |
| var->green.offset=8; | |
| var->blue.offset=0; | |
| var->red.length = var->green.length = var->blue.length = 8; | |
| case 32: | |
| var->red.offset = 16; | |
| var->green.offset = 8; | |
| var->blue.offset = 0; | |
| var->red.length = var->green.length = var->blue.length = 8; | |
| break; | |
| } | |
| var->height = var->width = -1; | |
| var->accel_flags = FB_ACCELF_TEXT; | |
| DPRINTK("Checking graphics mode at %dx%d depth %d\n", var->xres, var->yres, var->bits_per_pixel); | |
| return 0; | |
| } | |
| static int tdfxfb_set_par(struct fb_info *info) | |
| { | |
| struct tdfx_par *par = info->par; | |
| u32 hdispend, hsyncsta, hsyncend, htotal; | |
| u32 hd, hs, he, ht, hbs, hbe; | |
| u32 vd, vs, ve, vt, vbs, vbe; | |
| struct banshee_reg reg; | |
| int fout, freq; | |
| u32 wd, cpp; | |
| par->baseline = 0; | |
| memset(®, 0, sizeof(reg)); | |
| cpp = (info->var.bits_per_pixel + 7)/8; | |
| reg.vidcfg = VIDCFG_VIDPROC_ENABLE | VIDCFG_DESK_ENABLE | VIDCFG_CURS_X11 | ((cpp - 1) << VIDCFG_PIXFMT_SHIFT) | (cpp != 1 ? VIDCFG_CLUT_BYPASS : 0); | |
| /* PLL settings */ | |
| freq = PICOS2KHZ(info->var.pixclock); | |
| reg.dacmode = 0; | |
| reg.vidcfg &= ~VIDCFG_2X; | |
| hdispend = info->var.xres; | |
| hsyncsta = hdispend + info->var.right_margin; | |
| hsyncend = hsyncsta + info->var.hsync_len; | |
| htotal = hsyncend + info->var.left_margin; | |
| if (freq > par->max_pixclock/2) { | |
| freq = freq > par->max_pixclock ? par->max_pixclock : freq; | |
| reg.dacmode |= DACMODE_2X; | |
| reg.vidcfg |= VIDCFG_2X; | |
| hdispend >>= 1; | |
| hsyncsta >>= 1; | |
| hsyncend >>= 1; | |
| htotal >>= 1; | |
| } | |
| hd = wd = (hdispend >> 3) - 1; | |
| hs = (hsyncsta >> 3) - 1; | |
| he = (hsyncend >> 3) - 1; | |
| ht = (htotal >> 3) - 1; | |
| hbs = hd; | |
| hbe = ht; | |
| if ((info->var.vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE) { | |
| vbs = vd = (info->var.yres << 1) - 1; | |
| vs = vd + (info->var.lower_margin << 1); | |
| ve = vs + (info->var.vsync_len << 1); | |
| vbe = vt = ve + (info->var.upper_margin << 1) - 1; | |
| } else { | |
| vbs = vd = info->var.yres - 1; | |
| vs = vd + info->var.lower_margin; | |
| ve = vs + info->var.vsync_len; | |
| vbe = vt = ve + info->var.upper_margin - 1; | |
| } | |
| /* this is all pretty standard VGA register stuffing */ | |
| reg.misc[0x00] = 0x0f | | |
| (info->var.xres < 400 ? 0xa0 : | |
| info->var.xres < 480 ? 0x60 : | |
| info->var.xres < 768 ? 0xe0 : 0x20); | |
| reg.gra[0x00] = 0x00; | |
| reg.gra[0x01] = 0x00; | |
| reg.gra[0x02] = 0x00; | |
| reg.gra[0x03] = 0x00; | |
| reg.gra[0x04] = 0x00; | |
| reg.gra[0x05] = 0x40; | |
| reg.gra[0x06] = 0x05; | |
| reg.gra[0x07] = 0x0f; | |
| reg.gra[0x08] = 0xff; | |
| reg.att[0x00] = 0x00; | |
| reg.att[0x01] = 0x01; | |
| reg.att[0x02] = 0x02; | |
| reg.att[0x03] = 0x03; | |
| reg.att[0x04] = 0x04; | |
| reg.att[0x05] = 0x05; | |
| reg.att[0x06] = 0x06; | |
| reg.att[0x07] = 0x07; | |
| reg.att[0x08] = 0x08; | |
| reg.att[0x09] = 0x09; | |
| reg.att[0x0a] = 0x0a; | |
| reg.att[0x0b] = 0x0b; | |
| reg.att[0x0c] = 0x0c; | |
| reg.att[0x0d] = 0x0d; | |
| reg.att[0x0e] = 0x0e; | |
| reg.att[0x0f] = 0x0f; | |
| reg.att[0x10] = 0x41; | |
| reg.att[0x11] = 0x00; | |
| reg.att[0x12] = 0x0f; | |
| reg.att[0x13] = 0x00; | |
| reg.att[0x14] = 0x00; | |
| reg.seq[0x00] = 0x03; | |
| reg.seq[0x01] = 0x01; /* fixme: clkdiv2? */ | |
| reg.seq[0x02] = 0x0f; | |
| reg.seq[0x03] = 0x00; | |
| reg.seq[0x04] = 0x0e; | |
| reg.crt[0x00] = ht - 4; | |
| reg.crt[0x01] = hd; | |
| reg.crt[0x02] = hbs; | |
| reg.crt[0x03] = 0x80 | (hbe & 0x1f); | |
| reg.crt[0x04] = hs; | |
| reg.crt[0x05] = ((hbe & 0x20) << 2) | (he & 0x1f); | |
| reg.crt[0x06] = vt; | |
| reg.crt[0x07] = ((vs & 0x200) >> 2) | | |
| ((vd & 0x200) >> 3) | | |
| ((vt & 0x200) >> 4) | 0x10 | | |
| ((vbs & 0x100) >> 5) | | |
| ((vs & 0x100) >> 6) | | |
| ((vd & 0x100) >> 7) | | |
| ((vt & 0x100) >> 8); | |
| reg.crt[0x08] = 0x00; | |
| reg.crt[0x09] = 0x40 | ((vbs & 0x200) >> 4); | |
| reg.crt[0x0a] = 0x00; | |
| reg.crt[0x0b] = 0x00; | |
| reg.crt[0x0c] = 0x00; | |
| reg.crt[0x0d] = 0x00; | |
| reg.crt[0x0e] = 0x00; | |
| reg.crt[0x0f] = 0x00; | |
| reg.crt[0x10] = vs; | |
| reg.crt[0x11] = (ve & 0x0f) | 0x20; | |
| reg.crt[0x12] = vd; | |
| reg.crt[0x13] = wd; | |
| reg.crt[0x14] = 0x00; | |
| reg.crt[0x15] = vbs; | |
| reg.crt[0x16] = vbe + 1; | |
| reg.crt[0x17] = 0xc3; | |
| reg.crt[0x18] = 0xff; | |
| /* Banshee's nonvga stuff */ | |
| reg.ext[0x00] = (((ht & 0x100) >> 8) | | |
| ((hd & 0x100) >> 6) | | |
| ((hbs & 0x100) >> 4) | | |
| ((hbe & 0x40) >> 1) | | |
| ((hs & 0x100) >> 2) | | |
| ((he & 0x20) << 2)); | |
| reg.ext[0x01] = (((vt & 0x400) >> 10) | | |
| ((vd & 0x400) >> 8) | | |
| ((vbs & 0x400) >> 6) | | |
| ((vbe & 0x400) >> 4)); | |
| reg.vgainit0 = VGAINIT0_8BIT_DAC | | |
| VGAINIT0_EXT_ENABLE | | |
| VGAINIT0_WAKEUP_3C3 | | |
| VGAINIT0_ALT_READBACK | | |
| VGAINIT0_EXTSHIFTOUT; | |
| reg.vgainit1 = tdfx_inl(par, VGAINIT1) & 0x1fffff; | |
| reg.cursloc = 0; | |
| reg.cursc0 = 0; | |
| reg.cursc1 = 0xffffff; | |
| reg.stride = info->var.xres * cpp; | |
| reg.startaddr = par->baseline * reg.stride; | |
| reg.srcbase = reg.startaddr; | |
| reg.dstbase = reg.startaddr; | |
| /* PLL settings */ | |
| freq = PICOS2KHZ(info->var.pixclock); | |
| reg.dacmode &= ~DACMODE_2X; | |
| reg.vidcfg &= ~VIDCFG_2X; | |
| if (freq > par->max_pixclock/2) { | |
| freq = freq > par->max_pixclock ? par->max_pixclock : freq; | |
| reg.dacmode |= DACMODE_2X; | |
| reg.vidcfg |= VIDCFG_2X; | |
| } | |
| reg.vidpll = do_calc_pll(freq, &fout); | |
| #if 0 | |
| reg.mempll = do_calc_pll(..., &fout); | |
| reg.gfxpll = do_calc_pll(..., &fout); | |
| #endif | |
| if ((info->var.vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE) { | |
| reg.screensize = info->var.xres | (info->var.yres << 13); | |
| reg.vidcfg |= VIDCFG_HALF_MODE; | |
| reg.crt[0x09] |= 0x80; | |
| } else { | |
| reg.screensize = info->var.xres | (info->var.yres << 12); | |
| reg.vidcfg &= ~VIDCFG_HALF_MODE; | |
| } | |
| if ((info->var.vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) | |
| reg.vidcfg |= VIDCFG_INTERLACE; | |
| reg.miscinit0 = tdfx_inl(par, MISCINIT0); | |
| #if defined(__BIG_ENDIAN) | |
| switch (info->var.bits_per_pixel) { | |
| case 8: | |
| case 24: | |
| reg.miscinit0 &= ~(1 << 30); | |
| reg.miscinit0 &= ~(1 << 31); | |
| break; | |
| case 16: | |
| reg.miscinit0 |= (1 << 30); | |
| reg.miscinit0 |= (1 << 31); | |
| break; | |
| case 32: | |
| reg.miscinit0 |= (1 << 30); | |
| reg.miscinit0 &= ~(1 << 31); | |
| break; | |
| } | |
| #endif | |
| do_write_regs(info, ®); | |
| /* Now change fb_fix_screeninfo according to changes in par */ | |
| info->fix.line_length = info->var.xres * ((info->var.bits_per_pixel + 7)>>3); | |
| info->fix.visual = (info->var.bits_per_pixel == 8) | |
| ? FB_VISUAL_PSEUDOCOLOR | |
| : FB_VISUAL_TRUECOLOR; | |
| DPRINTK("Graphics mode is now set at %dx%d depth %d\n", info->var.xres, info->var.yres, info->var.bits_per_pixel); | |
| return 0; | |
| } | |
| /* A handy macro shamelessly pinched from matroxfb */ | |
| #define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16) | |
| static int tdfxfb_setcolreg(unsigned regno, unsigned red, unsigned green, | |
| unsigned blue,unsigned transp,struct fb_info *info) | |
| { | |
| struct tdfx_par *par = info->par; | |
| u32 rgbcol; | |
| if (regno >= info->cmap.len || regno > 255) return 1; | |
| switch (info->fix.visual) { | |
| case FB_VISUAL_PSEUDOCOLOR: | |
| rgbcol =(((u32)red & 0xff00) << 8) | | |
| (((u32)green & 0xff00) << 0) | | |
| (((u32)blue & 0xff00) >> 8); | |
| do_setpalentry(par, regno, rgbcol); | |
| break; | |
| /* Truecolor has no hardware color palettes. */ | |
| case FB_VISUAL_TRUECOLOR: | |
| if (regno < 16) { | |
| rgbcol = (CNVT_TOHW( red, info->var.red.length) << | |
| info->var.red.offset) | | |
| (CNVT_TOHW( green, info->var.green.length) << | |
| info->var.green.offset) | | |
| (CNVT_TOHW( blue, info->var.blue.length) << | |
| info->var.blue.offset) | | |
| (CNVT_TOHW( transp, info->var.transp.length) << | |
| info->var.transp.offset); | |
| par->palette[regno] = rgbcol; | |
| } | |
| break; | |
| default: | |
| DPRINTK("bad depth %u\n", info->var.bits_per_pixel); | |
| break; | |
| } | |
| return 0; | |
| } | |
| /* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */ | |
| static int tdfxfb_blank(int blank, struct fb_info *info) | |
| { | |
| struct tdfx_par *par = info->par; | |
| u32 dacmode, state = 0, vgablank = 0; | |
| dacmode = tdfx_inl(par, DACMODE); | |
| switch (blank) { | |
| case FB_BLANK_UNBLANK: /* Screen: On; HSync: On, VSync: On */ | |
| state = 0; | |
| vgablank = 0; | |
| break; | |
| case FB_BLANK_NORMAL: /* Screen: Off; HSync: On, VSync: On */ | |
| state = 0; | |
| vgablank = 1; | |
| break; | |
| case FB_BLANK_VSYNC_SUSPEND: /* Screen: Off; HSync: On, VSync: Off */ | |
| state = BIT(3); | |
| vgablank = 1; | |
| break; | |
| case FB_BLANK_HSYNC_SUSPEND: /* Screen: Off; HSync: Off, VSync: On */ | |
| state = BIT(1); | |
| vgablank = 1; | |
| break; | |
| case FB_BLANK_POWERDOWN: /* Screen: Off; HSync: Off, VSync: Off */ | |
| state = BIT(1) | BIT(3); | |
| vgablank = 1; | |
| break; | |
| } | |
| dacmode &= ~(BIT(1) | BIT(3)); | |
| dacmode |= state; | |
| banshee_make_room(par, 1); | |
| tdfx_outl(par, DACMODE, dacmode); | |
| if (vgablank) | |
| vga_disable_video(par); | |
| else | |
| vga_enable_video(par); | |
| return 0; | |
| } | |
| /* | |
| * Set the starting position of the visible screen to var->yoffset | |
| */ | |
| static int tdfxfb_pan_display(struct fb_var_screeninfo *var, | |
| struct fb_info *info) | |
| { | |
| struct tdfx_par *par = info->par; | |
| u32 addr; | |
| if (nopan || var->xoffset || (var->yoffset > var->yres_virtual)) | |
| return -EINVAL; | |
| if ((var->yoffset + var->yres > var->yres_virtual && nowrap)) | |
| return -EINVAL; | |
| addr = var->yoffset * info->fix.line_length; | |
| banshee_make_room(par, 1); | |
| tdfx_outl(par, VIDDESKSTART, addr); | |
| info->var.xoffset = var->xoffset; | |
| info->var.yoffset = var->yoffset; | |
| return 0; | |
| } | |
| #ifdef CONFIG_FB_3DFX_ACCEL | |
| /* | |
| * FillRect 2D command (solidfill or invert (via ROP_XOR)) | |
| */ | |
| static void tdfxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) | |
| { | |
| struct tdfx_par *par = info->par; | |
| u32 bpp = info->var.bits_per_pixel; | |
| u32 stride = info->fix.line_length; | |
| u32 fmt= stride | ((bpp+((bpp==8) ? 0 : 8)) << 13); | |
| int tdfx_rop; | |
| if (rect->rop == ROP_COPY) | |
| tdfx_rop = TDFX_ROP_COPY; | |
| else | |
| tdfx_rop = TDFX_ROP_XOR; | |
| banshee_make_room(par, 5); | |
| tdfx_outl(par, DSTFORMAT, fmt); | |
| if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR) { | |
| tdfx_outl(par, COLORFORE, rect->color); | |
| } else { /* FB_VISUAL_TRUECOLOR */ | |
| tdfx_outl(par, COLORFORE, par->palette[rect->color]); | |
| } | |
| tdfx_outl(par, COMMAND_2D, COMMAND_2D_FILLRECT | (tdfx_rop << 24)); | |
| tdfx_outl(par, DSTSIZE, rect->width | (rect->height << 16)); | |
| tdfx_outl(par, LAUNCH_2D, rect->dx | (rect->dy << 16)); | |
| } | |
| /* | |
| * Screen-to-Screen BitBlt 2D command (for the bmove fb op.) | |
| */ | |
| static void tdfxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) | |
| { | |
| struct tdfx_par *par = info->par; | |
| u32 sx = area->sx, sy = area->sy, dx = area->dx, dy = area->dy; | |
| u32 bpp = info->var.bits_per_pixel; | |
| u32 stride = info->fix.line_length; | |
| u32 blitcmd = COMMAND_2D_S2S_BITBLT | (TDFX_ROP_COPY << 24); | |
| u32 fmt = stride | ((bpp+((bpp==8) ? 0 : 8)) << 13); | |
| if (area->sx <= area->dx) { | |
| //-X | |
| blitcmd |= BIT(14); | |
| sx += area->width - 1; | |
| dx += area->width - 1; | |
| } | |
| if (area->sy <= area->dy) { | |
| //-Y | |
| blitcmd |= BIT(15); | |
| sy += area->height - 1; | |
| dy += area->height - 1; | |
| } | |
| banshee_make_room(par, 6); | |
| tdfx_outl(par, SRCFORMAT, fmt); | |
| tdfx_outl(par, DSTFORMAT, fmt); | |
| tdfx_outl(par, COMMAND_2D, blitcmd); | |
| tdfx_outl(par, DSTSIZE, area->width | (area->height << 16)); | |
| tdfx_outl(par, DSTXY, dx | (dy << 16)); | |
| tdfx_outl(par, LAUNCH_2D, sx | (sy << 16)); | |
| } | |
| static void tdfxfb_imageblit(struct fb_info *info, const struct fb_image *image) | |
| { | |
| struct tdfx_par *par = info->par; | |
| int size = image->height * ((image->width * image->depth + 7)>>3); | |
| int fifo_free; | |
| int i, stride = info->fix.line_length; | |
| u32 bpp = info->var.bits_per_pixel; | |
| u32 dstfmt = stride | ((bpp+((bpp==8) ? 0 : 8)) << 13); | |
| u8 *chardata = (u8 *) image->data; | |
| u32 srcfmt; | |
| if (image->depth != 1) { | |
| //banshee_make_room(par, 6 + ((size + 3) >> 2)); | |
| //srcfmt = stride | ((bpp+((bpp==8) ? 0 : 8)) << 13) | 0x400000; | |
| cfb_imageblit(info, image); | |
| return; | |
| } else { | |
| banshee_make_room(par, 8); | |
| switch (info->fix.visual) { | |
| case FB_VISUAL_PSEUDOCOLOR: | |
| tdfx_outl(par, COLORFORE, image->fg_color); | |
| tdfx_outl(par, COLORBACK, image->bg_color); | |
| break; | |
| case FB_VISUAL_TRUECOLOR: | |
| default: | |
| tdfx_outl(par, COLORFORE, | |
| par->palette[image->fg_color]); | |
| tdfx_outl(par, COLORBACK, | |
| par->palette[image->bg_color]); | |
| } | |
| #ifdef __BIG_ENDIAN | |
| srcfmt = 0x400000 | BIT(20); | |
| #else | |
| srcfmt = 0x400000; | |
| #endif | |
| } | |
| tdfx_outl(par, SRCXY, 0); | |
| tdfx_outl(par, DSTXY, image->dx | (image->dy << 16)); | |
| tdfx_outl(par, COMMAND_2D, COMMAND_2D_H2S_BITBLT | (TDFX_ROP_COPY << 24)); | |
| tdfx_outl(par, SRCFORMAT, srcfmt); | |
| tdfx_outl(par, DSTFORMAT, dstfmt); | |
| tdfx_outl(par, DSTSIZE, image->width | (image->height << 16)); | |
| /* A count of how many free FIFO entries we've requested. | |
| * When this goes negative, we need to request more. */ | |
| fifo_free = 0; | |
| /* Send four bytes at a time of data */ | |
| for (i = (size >> 2) ; i > 0; i--) { | |
| if(--fifo_free < 0) { | |
| fifo_free=31; | |
| banshee_make_room(par,fifo_free); | |
| } | |
| tdfx_outl(par, LAUNCH_2D,*(u32*)chardata); | |
| chardata += 4; | |
| } | |
| /* Send the leftovers now */ | |
| banshee_make_room(par,3); | |
| i = size%4; | |
| switch (i) { | |
| case 0: break; | |
| case 1: tdfx_outl(par, LAUNCH_2D,*chardata); break; | |
| case 2: tdfx_outl(par, LAUNCH_2D,*(u16*)chardata); break; | |
| case 3: tdfx_outl(par, LAUNCH_2D,*(u16*)chardata | ((chardata[3]) << 24)); break; | |
| } | |
| } | |
| #endif /* CONFIG_FB_3DFX_ACCEL */ | |
| #ifdef TDFX_HARDWARE_CURSOR | |
| static int tdfxfb_cursor(struct fb_info *info, struct fb_cursor *cursor) | |
| { | |
| struct tdfx_par *par = info->par; | |
| unsigned long flags; | |
| /* | |
| * If the cursor is not be changed this means either we want the | |
| * current cursor state (if enable is set) or we want to query what | |
| * we can do with the cursor (if enable is not set) | |
| */ | |
| if (!cursor->set) return 0; | |
| /* Too large of a cursor :-( */ | |
| if (cursor->image.width > 64 || cursor->image.height > 64) | |
| return -ENXIO; | |
| /* | |
| * If we are going to be changing things we should disable | |
| * the cursor first | |
| */ | |
| if (info->cursor.enable) { | |
| spin_lock_irqsave(&par->DAClock, flags); | |
| info->cursor.enable = 0; | |
| del_timer(&(par->hwcursor.timer)); | |
| tdfx_outl(par, VIDPROCCFG, par->hwcursor.disable); | |
| spin_unlock_irqrestore(&par->DAClock, flags); | |
| } | |
| /* Disable the Cursor */ | |
| if ((cursor->set && FB_CUR_SETCUR) && !cursor->enable) | |
| return 0; | |
| /* fix cursor color - XFree86 forgets to restore it properly */ | |
| if (cursor->set && FB_CUR_SETCMAP) { | |
| struct fb_cmap cmap = cursor->image.cmap; | |
| unsigned long bg_color, fg_color; | |
| cmap.len = 2; /* Voodoo 3+ only support 2 color cursors */ | |
| fg_color = ((cmap.red[cmap.start] << 16) | | |
| (cmap.green[cmap.start] << 8) | | |
| (cmap.blue[cmap.start])); | |
| bg_color = ((cmap.red[cmap.start+1] << 16) | | |
| (cmap.green[cmap.start+1] << 8) | | |
| (cmap.blue[cmap.start+1])); | |
| fb_copy_cmap(&cmap, &info->cursor.image.cmap); | |
| spin_lock_irqsave(&par->DAClock, flags); | |
| banshee_make_room(par, 2); | |
| tdfx_outl(par, HWCURC0, bg_color); | |
| tdfx_outl(par, HWCURC1, fg_color); | |
| spin_unlock_irqrestore(&par->DAClock, flags); | |
| } | |
| if (cursor->set && FB_CUR_SETPOS) { | |
| int x, y; | |
| x = cursor->image.dx; | |
| y = cursor->image.dy; | |
| y -= info->var.yoffset; | |
| info->cursor.image.dx = x; | |
| info->cursor.image.dy = y; | |
| x += 63; | |
| y += 63; | |
| spin_lock_irqsave(&par->DAClock, flags); | |
| banshee_make_room(par, 1); | |
| tdfx_outl(par, HWCURLOC, (y << 16) + x); | |
| spin_unlock_irqrestore(&par->DAClock, flags); | |
| } | |
| /* Not supported so we fake it */ | |
| if (cursor->set && FB_CUR_SETHOT) { | |
| info->cursor.hot.x = cursor->hot.x; | |
| info->cursor.hot.y = cursor->hot.y; | |
| } | |
| if (cursor->set && FB_CUR_SETSHAPE) { | |
| /* | |
| * Voodoo 3 and above cards use 2 monochrome cursor patterns. | |
| * The reason is so the card can fetch 8 words at a time | |
| * and are stored on chip for use for the next 8 scanlines. | |
| * This reduces the number of times for access to draw the | |
| * cursor for each screen refresh. | |
| * Each pattern is a bitmap of 64 bit wide and 64 bit high | |
| * (total of 8192 bits or 1024 Kbytes). The two patterns are | |
| * stored in such a way that pattern 0 always resides in the | |
| * lower half (least significant 64 bits) of a 128 bit word | |
| * and pattern 1 the upper half. If you examine the data of | |
| * the cursor image the graphics card uses then from the | |
| * begining you see line one of pattern 0, line one of | |
| * pattern 1, line two of pattern 0, line two of pattern 1, | |
| * etc etc. The linear stride for the cursor is always 16 bytes | |
| * (128 bits) which is the maximum cursor width times two for | |
| * the two monochrome patterns. | |
| */ | |
| u8 *cursorbase = (u8 *) info->cursor.image.data; | |
| char *bitmap = (char *)cursor->image.data; | |
| char *mask = (char *) cursor->mask; | |
| int i, j, k, h = 0; | |
| for (i = 0; i < 64; i++) { | |
| if (i < cursor->image.height) { | |
| j = (cursor->image.width + 7) >> 3; | |
| k = 8 - j; | |
| for (;j > 0; j--) { | |
| /* Pattern 0. Copy the cursor bitmap to it */ | |
| fb_writeb(*bitmap, cursorbase + h); | |
| bitmap++; | |
| /* Pattern 1. Copy the cursor mask to it */ | |
| fb_writeb(*mask, cursorbase + h + 8); | |
| mask++; | |
| h++; | |
| } | |
| for (;k > 0; k--) { | |
| fb_writeb(0, cursorbase + h); | |
| fb_writeb(~0, cursorbase + h + 8); | |
| h++; | |
| } | |
| } else { | |
| fb_writel(0, cursorbase + h); | |
| fb_writel(0, cursorbase + h + 4); | |
| fb_writel(~0, cursorbase + h + 8); | |
| fb_writel(~0, cursorbase + h + 12); | |
| h += 16; | |
| } | |
| } | |
| } | |
| /* Turn the cursor on */ | |
| cursor->enable = 1; | |
| info->cursor = *cursor; | |
| mod_timer(&par->hwcursor.timer, jiffies+HZ/2); | |
| spin_lock_irqsave(&par->DAClock, flags); | |
| banshee_make_room(par, 1); | |
| tdfx_outl(par, VIDPROCCFG, par->hwcursor.enable); | |
| spin_unlock_irqrestore(&par->DAClock, flags); | |
| return 0; | |
| } | |
| #endif | |
| /** | |
| * tdfxfb_probe - Device Initializiation | |
| * | |
| * @pdev: PCI Device to initialize | |
| * @id: PCI Device ID | |
| * | |
| * Initializes and allocates resources for PCI device @pdev. | |
| * | |
| */ | |
| static int __devinit tdfxfb_probe(struct pci_dev *pdev, | |
| const struct pci_device_id *id) | |
| { | |
| struct tdfx_par *default_par; | |
| struct fb_info *info; | |
| int err, lpitch; | |
| if ((err = pci_enable_device(pdev))) { | |
| printk(KERN_WARNING "tdfxfb: Can't enable pdev: %d\n", err); | |
| return err; | |
| } | |
| info = framebuffer_alloc(sizeof(struct tdfx_par), &pdev->dev); | |
| if (!info) | |
| return -ENOMEM; | |
| default_par = info->par; | |
| /* Configure the default fb_fix_screeninfo first */ | |
| switch (pdev->device) { | |
| case PCI_DEVICE_ID_3DFX_BANSHEE: | |
| strcat(tdfx_fix.id, " Banshee"); | |
| default_par->max_pixclock = BANSHEE_MAX_PIXCLOCK; | |
| break; | |
| case PCI_DEVICE_ID_3DFX_VOODOO3: | |
| strcat(tdfx_fix.id, " Voodoo3"); | |
| default_par->max_pixclock = VOODOO3_MAX_PIXCLOCK; | |
| break; | |
| case PCI_DEVICE_ID_3DFX_VOODOO5: | |
| strcat(tdfx_fix.id, " Voodoo5"); | |
| default_par->max_pixclock = VOODOO5_MAX_PIXCLOCK; | |
| break; | |
| } | |
| tdfx_fix.mmio_start = pci_resource_start(pdev, 0); | |
| tdfx_fix.mmio_len = pci_resource_len(pdev, 0); | |
| default_par->regbase_virt = ioremap_nocache(tdfx_fix.mmio_start, tdfx_fix.mmio_len); | |
| if (!default_par->regbase_virt) { | |
| printk("fb: Can't remap %s register area.\n", tdfx_fix.id); | |
| goto out_err; | |
| } | |
| if (!request_mem_region(pci_resource_start(pdev, 0), | |
| pci_resource_len(pdev, 0), "tdfx regbase")) { | |
| printk(KERN_WARNING "tdfxfb: Can't reserve regbase\n"); | |
| goto out_err; | |
| } | |
| tdfx_fix.smem_start = pci_resource_start(pdev, 1); | |
| if (!(tdfx_fix.smem_len = do_lfb_size(default_par, pdev->device))) { | |
| printk("fb: Can't count %s memory.\n", tdfx_fix.id); | |
| release_mem_region(pci_resource_start(pdev, 0), | |
| pci_resource_len(pdev, 0)); | |
| goto out_err; | |
| } | |
| if (!request_mem_region(pci_resource_start(pdev, 1), | |
| pci_resource_len(pdev, 1), "tdfx smem")) { | |
| printk(KERN_WARNING "tdfxfb: Can't reserve smem\n"); | |
| release_mem_region(pci_resource_start(pdev, 0), | |
| pci_resource_len(pdev, 0)); | |
| goto out_err; | |
| } | |
| info->screen_base = ioremap_nocache(tdfx_fix.smem_start, | |
| tdfx_fix.smem_len); | |
| if (!info->screen_base) { | |
| printk("fb: Can't remap %s framebuffer.\n", tdfx_fix.id); | |
| release_mem_region(pci_resource_start(pdev, 1), | |
| pci_resource_len(pdev, 1)); | |
| release_mem_region(pci_resource_start(pdev, 0), | |
| pci_resource_len(pdev, 0)); | |
| goto out_err; | |
| } | |
| default_par->iobase = pci_resource_start(pdev, 2); | |
| if (!request_region(pci_resource_start(pdev, 2), | |
| pci_resource_len(pdev, 2), "tdfx iobase")) { | |
| printk(KERN_WARNING "tdfxfb: Can't reserve iobase\n"); | |
| release_mem_region(pci_resource_start(pdev, 1), | |
| pci_resource_len(pdev, 1)); | |
| release_mem_region(pci_resource_start(pdev, 0), | |
| pci_resource_len(pdev, 0)); | |
| goto out_err; | |
| } | |
| printk("fb: %s memory = %dK\n", tdfx_fix.id, tdfx_fix.smem_len >> 10); | |
| tdfx_fix.ypanstep = nopan ? 0 : 1; | |
| tdfx_fix.ywrapstep = nowrap ? 0 : 1; | |
| info->fbops = &tdfxfb_ops; | |
| info->fix = tdfx_fix; | |
| info->pseudo_palette = default_par->palette; | |
| info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; | |
| #ifdef CONFIG_FB_3DFX_ACCEL | |
| info->flags |= FBINFO_HWACCEL_FILLRECT | | |
| FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_IMAGEBLIT; | |
| #endif | |
| if (!mode_option) | |
| mode_option = "640x480@60"; | |
| err = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 8); | |
| if (!err || err == 4) | |
| info->var = tdfx_var; | |
| /* maximize virtual vertical length */ | |
| lpitch = info->var.xres_virtual * ((info->var.bits_per_pixel + 7) >> 3); | |
| info->var.yres_virtual = info->fix.smem_len/lpitch; | |
| if (info->var.yres_virtual < info->var.yres) | |
| goto out_err; | |
| #ifdef CONFIG_FB_3DFX_ACCEL | |
| /* | |
| * FIXME: Limit var->yres_virtual to 4096 because of screen artifacts | |
| * during scrolling. This is only present if 2D acceleration is | |
| * enabled. | |
| */ | |
| if (info->var.yres_virtual > 4096) | |
| info->var.yres_virtual = 4096; | |
| #endif /* CONFIG_FB_3DFX_ACCEL */ | |
| if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { | |
| printk(KERN_WARNING "tdfxfb: Can't allocate color map\n"); | |
| goto out_err; | |
| } | |
| if (register_framebuffer(info) < 0) { | |
| printk("tdfxfb: can't register framebuffer\n"); | |
| fb_dealloc_cmap(&info->cmap); | |
| goto out_err; | |
| } | |
| /* | |
| * Our driver data | |
| */ | |
| pci_set_drvdata(pdev, info); | |
| return 0; | |
| out_err: | |
| /* | |
| * Cleanup after anything that was remapped/allocated. | |
| */ | |
| if (default_par->regbase_virt) | |
| iounmap(default_par->regbase_virt); | |
| if (info->screen_base) | |
| iounmap(info->screen_base); | |
| framebuffer_release(info); | |
| return -ENXIO; | |
| } | |
| #ifndef MODULE | |
| static void tdfxfb_setup(char *options) | |
| { | |
| char* this_opt; | |
| if (!options || !*options) | |
| return; | |
| while ((this_opt = strsep(&options, ",")) != NULL) { | |
| if (!*this_opt) | |
| continue; | |
| if(!strcmp(this_opt, "nopan")) { | |
| nopan = 1; | |
| } else if(!strcmp(this_opt, "nowrap")) { | |
| nowrap = 1; | |
| } else { | |
| mode_option = this_opt; | |
| } | |
| } | |
| } | |
| #endif | |
| /** | |
| * tdfxfb_remove - Device removal | |
| * | |
| * @pdev: PCI Device to cleanup | |
| * | |
| * Releases all resources allocated during the course of the driver's | |
| * lifetime for the PCI device @pdev. | |
| * | |
| */ | |
| static void __devexit tdfxfb_remove(struct pci_dev *pdev) | |
| { | |
| struct fb_info *info = pci_get_drvdata(pdev); | |
| struct tdfx_par *par = info->par; | |
| unregister_framebuffer(info); | |
| iounmap(par->regbase_virt); | |
| iounmap(info->screen_base); | |
| /* Clean up after reserved regions */ | |
| release_region(pci_resource_start(pdev, 2), | |
| pci_resource_len(pdev, 2)); | |
| release_mem_region(pci_resource_start(pdev, 1), | |
| pci_resource_len(pdev, 1)); | |
| release_mem_region(pci_resource_start(pdev, 0), | |
| pci_resource_len(pdev, 0)); | |
| pci_set_drvdata(pdev, NULL); | |
| framebuffer_release(info); | |
| } | |
| static int __init tdfxfb_init(void) | |
| { | |
| #ifndef MODULE | |
| char *option = NULL; | |
| if (fb_get_options("tdfxfb", &option)) | |
| return -ENODEV; | |
| tdfxfb_setup(option); | |
| #endif | |
| return pci_register_driver(&tdfxfb_driver); | |
| } | |
| static void __exit tdfxfb_exit(void) | |
| { | |
| pci_unregister_driver(&tdfxfb_driver); | |
| } | |
| MODULE_AUTHOR("Hannu Mallat <hmallat@cc.hut.fi>"); | |
| MODULE_DESCRIPTION("3Dfx framebuffer device driver"); | |
| MODULE_LICENSE("GPL"); | |
| module_init(tdfxfb_init); | |
| module_exit(tdfxfb_exit); |