| /* | |
| * dscore.c | |
| * | |
| * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> | |
| * | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mod_devicetable.h> | |
| #include <linux/usb.h> | |
| #include "../w1_int.h" | |
| #include "../w1.h" | |
| /* COMMAND TYPE CODES */ | |
| #define CONTROL_CMD 0x00 | |
| #define COMM_CMD 0x01 | |
| #define MODE_CMD 0x02 | |
| /* CONTROL COMMAND CODES */ | |
| #define CTL_RESET_DEVICE 0x0000 | |
| #define CTL_START_EXE 0x0001 | |
| #define CTL_RESUME_EXE 0x0002 | |
| #define CTL_HALT_EXE_IDLE 0x0003 | |
| #define CTL_HALT_EXE_DONE 0x0004 | |
| #define CTL_FLUSH_COMM_CMDS 0x0007 | |
| #define CTL_FLUSH_RCV_BUFFER 0x0008 | |
| #define CTL_FLUSH_XMT_BUFFER 0x0009 | |
| #define CTL_GET_COMM_CMDS 0x000A | |
| /* MODE COMMAND CODES */ | |
| #define MOD_PULSE_EN 0x0000 | |
| #define MOD_SPEED_CHANGE_EN 0x0001 | |
| #define MOD_1WIRE_SPEED 0x0002 | |
| #define MOD_STRONG_PU_DURATION 0x0003 | |
| #define MOD_PULLDOWN_SLEWRATE 0x0004 | |
| #define MOD_PROG_PULSE_DURATION 0x0005 | |
| #define MOD_WRITE1_LOWTIME 0x0006 | |
| #define MOD_DSOW0_TREC 0x0007 | |
| /* COMMUNICATION COMMAND CODES */ | |
| #define COMM_ERROR_ESCAPE 0x0601 | |
| #define COMM_SET_DURATION 0x0012 | |
| #define COMM_BIT_IO 0x0020 | |
| #define COMM_PULSE 0x0030 | |
| #define COMM_1_WIRE_RESET 0x0042 | |
| #define COMM_BYTE_IO 0x0052 | |
| #define COMM_MATCH_ACCESS 0x0064 | |
| #define COMM_BLOCK_IO 0x0074 | |
| #define COMM_READ_STRAIGHT 0x0080 | |
| #define COMM_DO_RELEASE 0x6092 | |
| #define COMM_SET_PATH 0x00A2 | |
| #define COMM_WRITE_SRAM_PAGE 0x00B2 | |
| #define COMM_WRITE_EPROM 0x00C4 | |
| #define COMM_READ_CRC_PROT_PAGE 0x00D4 | |
| #define COMM_READ_REDIRECT_PAGE_CRC 0x21E4 | |
| #define COMM_SEARCH_ACCESS 0x00F4 | |
| /* Communication command bits */ | |
| #define COMM_TYPE 0x0008 | |
| #define COMM_SE 0x0008 | |
| #define COMM_D 0x0008 | |
| #define COMM_Z 0x0008 | |
| #define COMM_CH 0x0008 | |
| #define COMM_SM 0x0008 | |
| #define COMM_R 0x0008 | |
| #define COMM_IM 0x0001 | |
| #define COMM_PS 0x4000 | |
| #define COMM_PST 0x4000 | |
| #define COMM_CIB 0x4000 | |
| #define COMM_RTS 0x4000 | |
| #define COMM_DT 0x2000 | |
| #define COMM_SPU 0x1000 | |
| #define COMM_F 0x0800 | |
| #define COMM_NTP 0x0400 | |
| #define COMM_ICP 0x0200 | |
| #define COMM_RST 0x0100 | |
| #define PULSE_PROG 0x01 | |
| #define PULSE_SPUE 0x02 | |
| #define BRANCH_MAIN 0xCC | |
| #define BRANCH_AUX 0x33 | |
| /* | |
| * Duration of the strong pull-up pulse in milliseconds. | |
| */ | |
| #define PULLUP_PULSE_DURATION 750 | |
| /* Status flags */ | |
| #define ST_SPUA 0x01 /* Strong Pull-up is active */ | |
| #define ST_PRGA 0x02 /* 12V programming pulse is being generated */ | |
| #define ST_12VP 0x04 /* external 12V programming voltage is present */ | |
| #define ST_PMOD 0x08 /* DS2490 powered from USB and external sources */ | |
| #define ST_HALT 0x10 /* DS2490 is currently halted */ | |
| #define ST_IDLE 0x20 /* DS2490 is currently idle */ | |
| #define ST_EPOF 0x80 | |
| #define SPEED_NORMAL 0x00 | |
| #define SPEED_FLEXIBLE 0x01 | |
| #define SPEED_OVERDRIVE 0x02 | |
| #define NUM_EP 4 | |
| #define EP_CONTROL 0 | |
| #define EP_STATUS 1 | |
| #define EP_DATA_OUT 2 | |
| #define EP_DATA_IN 3 | |
| struct ds_device | |
| { | |
| struct list_head ds_entry; | |
| struct usb_device *udev; | |
| struct usb_interface *intf; | |
| int ep[NUM_EP]; | |
| struct w1_bus_master master; | |
| }; | |
| struct ds_status | |
| { | |
| u8 enable; | |
| u8 speed; | |
| u8 pullup_dur; | |
| u8 ppuls_dur; | |
| u8 pulldown_slew; | |
| u8 write1_time; | |
| u8 write0_time; | |
| u8 reserved0; | |
| u8 status; | |
| u8 command0; | |
| u8 command1; | |
| u8 command_buffer_status; | |
| u8 data_out_buffer_status; | |
| u8 data_in_buffer_status; | |
| u8 reserved1; | |
| u8 reserved2; | |
| }; | |
| static struct usb_device_id ds_id_table [] = { | |
| { USB_DEVICE(0x04fa, 0x2490) }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(usb, ds_id_table); | |
| static int ds_probe(struct usb_interface *, const struct usb_device_id *); | |
| static void ds_disconnect(struct usb_interface *); | |
| static inline void ds_dump_status(unsigned char *, unsigned char *, int); | |
| static int ds_send_control(struct ds_device *, u16, u16); | |
| static int ds_send_control_cmd(struct ds_device *, u16, u16); | |
| static LIST_HEAD(ds_devices); | |
| static DEFINE_MUTEX(ds_mutex); | |
| static struct usb_driver ds_driver = { | |
| .name = "DS9490R", | |
| .probe = ds_probe, | |
| .disconnect = ds_disconnect, | |
| .id_table = ds_id_table, | |
| }; | |
| static int ds_send_control_cmd(struct ds_device *dev, u16 value, u16 index) | |
| { | |
| int err; | |
| err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), | |
| CONTROL_CMD, 0x40, value, index, NULL, 0, 1000); | |
| if (err < 0) { | |
| printk(KERN_ERR "Failed to send command control message %x.%x: err=%d.\n", | |
| value, index, err); | |
| return err; | |
| } | |
| return err; | |
| } | |
| #if 0 | |
| static int ds_send_control_mode(struct ds_device *dev, u16 value, u16 index) | |
| { | |
| int err; | |
| err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), | |
| MODE_CMD, 0x40, value, index, NULL, 0, 1000); | |
| if (err < 0) { | |
| printk(KERN_ERR "Failed to send mode control message %x.%x: err=%d.\n", | |
| value, index, err); | |
| return err; | |
| } | |
| return err; | |
| } | |
| #endif | |
| static int ds_send_control(struct ds_device *dev, u16 value, u16 index) | |
| { | |
| int err; | |
| err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), | |
| COMM_CMD, 0x40, value, index, NULL, 0, 1000); | |
| if (err < 0) { | |
| printk(KERN_ERR "Failed to send control message %x.%x: err=%d.\n", | |
| value, index, err); | |
| return err; | |
| } | |
| return err; | |
| } | |
| static inline void ds_dump_status(unsigned char *buf, unsigned char *str, int off) | |
| { | |
| printk("%45s: %8x\n", str, buf[off]); | |
| } | |
| static int ds_recv_status_nodump(struct ds_device *dev, struct ds_status *st, | |
| unsigned char *buf, int size) | |
| { | |
| int count, err; | |
| memset(st, 0, sizeof(st)); | |
| count = 0; | |
| err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_STATUS]), buf, size, &count, 100); | |
| if (err < 0) { | |
| printk(KERN_ERR "Failed to read 1-wire data from 0x%x: err=%d.\n", dev->ep[EP_STATUS], err); | |
| return err; | |
| } | |
| if (count >= sizeof(*st)) | |
| memcpy(st, buf, sizeof(*st)); | |
| return count; | |
| } | |
| static int ds_recv_status(struct ds_device *dev, struct ds_status *st) | |
| { | |
| unsigned char buf[64]; | |
| int count, err = 0, i; | |
| memcpy(st, buf, sizeof(*st)); | |
| count = ds_recv_status_nodump(dev, st, buf, sizeof(buf)); | |
| if (count < 0) | |
| return err; | |
| printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], count); | |
| for (i=0; i<count; ++i) | |
| printk("%02x ", buf[i]); | |
| printk("\n"); | |
| if (count >= 16) { | |
| ds_dump_status(buf, "enable flag", 0); | |
| ds_dump_status(buf, "1-wire speed", 1); | |
| ds_dump_status(buf, "strong pullup duration", 2); | |
| ds_dump_status(buf, "programming pulse duration", 3); | |
| ds_dump_status(buf, "pulldown slew rate control", 4); | |
| ds_dump_status(buf, "write-1 low time", 5); | |
| ds_dump_status(buf, "data sample offset/write-0 recovery time", 6); | |
| ds_dump_status(buf, "reserved (test register)", 7); | |
| ds_dump_status(buf, "device status flags", 8); | |
| ds_dump_status(buf, "communication command byte 1", 9); | |
| ds_dump_status(buf, "communication command byte 2", 10); | |
| ds_dump_status(buf, "communication command buffer status", 11); | |
| ds_dump_status(buf, "1-wire data output buffer status", 12); | |
| ds_dump_status(buf, "1-wire data input buffer status", 13); | |
| ds_dump_status(buf, "reserved", 14); | |
| ds_dump_status(buf, "reserved", 15); | |
| } | |
| memcpy(st, buf, sizeof(*st)); | |
| if (st->status & ST_EPOF) { | |
| printk(KERN_INFO "Resetting device after ST_EPOF.\n"); | |
| err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0); | |
| if (err) | |
| return err; | |
| count = ds_recv_status_nodump(dev, st, buf, sizeof(buf)); | |
| if (count < 0) | |
| return err; | |
| } | |
| #if 0 | |
| if (st->status & ST_IDLE) { | |
| printk(KERN_INFO "Resetting pulse after ST_IDLE.\n"); | |
| err = ds_start_pulse(dev, PULLUP_PULSE_DURATION); | |
| if (err) | |
| return err; | |
| } | |
| #endif | |
| return err; | |
| } | |
| static int ds_recv_data(struct ds_device *dev, unsigned char *buf, int size) | |
| { | |
| int count, err; | |
| struct ds_status st; | |
| count = 0; | |
| err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]), | |
| buf, size, &count, 1000); | |
| if (err < 0) { | |
| printk(KERN_INFO "Clearing ep0x%x.\n", dev->ep[EP_DATA_IN]); | |
| usb_clear_halt(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN])); | |
| ds_recv_status(dev, &st); | |
| return err; | |
| } | |
| #if 0 | |
| { | |
| int i; | |
| printk("%s: count=%d: ", __func__, count); | |
| for (i=0; i<count; ++i) | |
| printk("%02x ", buf[i]); | |
| printk("\n"); | |
| } | |
| #endif | |
| return count; | |
| } | |
| static int ds_send_data(struct ds_device *dev, unsigned char *buf, int len) | |
| { | |
| int count, err; | |
| count = 0; | |
| err = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, dev->ep[EP_DATA_OUT]), buf, len, &count, 1000); | |
| if (err < 0) { | |
| printk(KERN_ERR "Failed to read 1-wire data from 0x02: err=%d.\n", err); | |
| return err; | |
| } | |
| return err; | |
| } | |
| #if 0 | |
| int ds_stop_pulse(struct ds_device *dev, int limit) | |
| { | |
| struct ds_status st; | |
| int count = 0, err = 0; | |
| u8 buf[0x20]; | |
| do { | |
| err = ds_send_control(dev, CTL_HALT_EXE_IDLE, 0); | |
| if (err) | |
| break; | |
| err = ds_send_control(dev, CTL_RESUME_EXE, 0); | |
| if (err) | |
| break; | |
| err = ds_recv_status_nodump(dev, &st, buf, sizeof(buf)); | |
| if (err) | |
| break; | |
| if ((st.status & ST_SPUA) == 0) { | |
| err = ds_send_control_mode(dev, MOD_PULSE_EN, 0); | |
| if (err) | |
| break; | |
| } | |
| } while(++count < limit); | |
| return err; | |
| } | |
| int ds_detect(struct ds_device *dev, struct ds_status *st) | |
| { | |
| int err; | |
| err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0); | |
| if (err) | |
| return err; | |
| err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, 0); | |
| if (err) | |
| return err; | |
| err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM | COMM_TYPE, 0x40); | |
| if (err) | |
| return err; | |
| err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_PROG); | |
| if (err) | |
| return err; | |
| err = ds_recv_status(dev, st); | |
| return err; | |
| } | |
| #endif /* 0 */ | |
| static int ds_wait_status(struct ds_device *dev, struct ds_status *st) | |
| { | |
| u8 buf[0x20]; | |
| int err, count = 0; | |
| do { | |
| err = ds_recv_status_nodump(dev, st, buf, sizeof(buf)); | |
| #if 0 | |
| if (err >= 0) { | |
| int i; | |
| printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], err); | |
| for (i=0; i<err; ++i) | |
| printk("%02x ", buf[i]); | |
| printk("\n"); | |
| } | |
| #endif | |
| } while(!(buf[0x08] & 0x20) && !(err < 0) && ++count < 100); | |
| if (((err > 16) && (buf[0x10] & 0x01)) || count >= 100 || err < 0) { | |
| ds_recv_status(dev, st); | |
| return -1; | |
| } else | |
| return 0; | |
| } | |
| static int ds_reset(struct ds_device *dev, struct ds_status *st) | |
| { | |
| int err; | |
| //err = ds_send_control(dev, COMM_1_WIRE_RESET | COMM_F | COMM_IM | COMM_SE, SPEED_FLEXIBLE); | |
| err = ds_send_control(dev, 0x43, SPEED_NORMAL); | |
| if (err) | |
| return err; | |
| ds_wait_status(dev, st); | |
| #if 0 | |
| if (st->command_buffer_status) { | |
| printk(KERN_INFO "Short circuit.\n"); | |
| return -EIO; | |
| } | |
| #endif | |
| return 0; | |
| } | |
| #if 0 | |
| static int ds_set_speed(struct ds_device *dev, int speed) | |
| { | |
| int err; | |
| if (speed != SPEED_NORMAL && speed != SPEED_FLEXIBLE && speed != SPEED_OVERDRIVE) | |
| return -EINVAL; | |
| if (speed != SPEED_OVERDRIVE) | |
| speed = SPEED_FLEXIBLE; | |
| speed &= 0xff; | |
| err = ds_send_control_mode(dev, MOD_1WIRE_SPEED, speed); | |
| if (err) | |
| return err; | |
| return err; | |
| } | |
| #endif /* 0 */ | |
| static int ds_start_pulse(struct ds_device *dev, int delay) | |
| { | |
| int err; | |
| u8 del = 1 + (u8)(delay >> 4); | |
| struct ds_status st; | |
| #if 0 | |
| err = ds_stop_pulse(dev, 10); | |
| if (err) | |
| return err; | |
| err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_SPUE); | |
| if (err) | |
| return err; | |
| #endif | |
| err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, del); | |
| if (err) | |
| return err; | |
| err = ds_send_control(dev, COMM_PULSE | COMM_IM | COMM_F, 0); | |
| if (err) | |
| return err; | |
| mdelay(delay); | |
| ds_wait_status(dev, &st); | |
| return err; | |
| } | |
| static int ds_touch_bit(struct ds_device *dev, u8 bit, u8 *tbit) | |
| { | |
| int err, count; | |
| struct ds_status st; | |
| u16 value = (COMM_BIT_IO | COMM_IM) | ((bit) ? COMM_D : 0); | |
| u16 cmd; | |
| err = ds_send_control(dev, value, 0); | |
| if (err) | |
| return err; | |
| count = 0; | |
| do { | |
| err = ds_wait_status(dev, &st); | |
| if (err) | |
| return err; | |
| cmd = st.command0 | (st.command1 << 8); | |
| } while (cmd != value && ++count < 10); | |
| if (err < 0 || count >= 10) { | |
| printk(KERN_ERR "Failed to obtain status.\n"); | |
| return -EINVAL; | |
| } | |
| err = ds_recv_data(dev, tbit, sizeof(*tbit)); | |
| if (err < 0) | |
| return err; | |
| return 0; | |
| } | |
| static int ds_write_bit(struct ds_device *dev, u8 bit) | |
| { | |
| int err; | |
| struct ds_status st; | |
| err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | (bit) ? COMM_D : 0, 0); | |
| if (err) | |
| return err; | |
| ds_wait_status(dev, &st); | |
| return 0; | |
| } | |
| static int ds_write_byte(struct ds_device *dev, u8 byte) | |
| { | |
| int err; | |
| struct ds_status st; | |
| u8 rbyte; | |
| err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM | COMM_SPU, byte); | |
| if (err) | |
| return err; | |
| err = ds_wait_status(dev, &st); | |
| if (err) | |
| return err; | |
| err = ds_recv_data(dev, &rbyte, sizeof(rbyte)); | |
| if (err < 0) | |
| return err; | |
| ds_start_pulse(dev, PULLUP_PULSE_DURATION); | |
| return !(byte == rbyte); | |
| } | |
| static int ds_read_byte(struct ds_device *dev, u8 *byte) | |
| { | |
| int err; | |
| struct ds_status st; | |
| err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM , 0xff); | |
| if (err) | |
| return err; | |
| ds_wait_status(dev, &st); | |
| err = ds_recv_data(dev, byte, sizeof(*byte)); | |
| if (err < 0) | |
| return err; | |
| return 0; | |
| } | |
| static int ds_read_block(struct ds_device *dev, u8 *buf, int len) | |
| { | |
| struct ds_status st; | |
| int err; | |
| if (len > 64*1024) | |
| return -E2BIG; | |
| memset(buf, 0xFF, len); | |
| err = ds_send_data(dev, buf, len); | |
| if (err < 0) | |
| return err; | |
| err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len); | |
| if (err) | |
| return err; | |
| ds_wait_status(dev, &st); | |
| memset(buf, 0x00, len); | |
| err = ds_recv_data(dev, buf, len); | |
| return err; | |
| } | |
| static int ds_write_block(struct ds_device *dev, u8 *buf, int len) | |
| { | |
| int err; | |
| struct ds_status st; | |
| err = ds_send_data(dev, buf, len); | |
| if (err < 0) | |
| return err; | |
| ds_wait_status(dev, &st); | |
| err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len); | |
| if (err) | |
| return err; | |
| ds_wait_status(dev, &st); | |
| err = ds_recv_data(dev, buf, len); | |
| if (err < 0) | |
| return err; | |
| ds_start_pulse(dev, PULLUP_PULSE_DURATION); | |
| return !(err == len); | |
| } | |
| #if 0 | |
| static int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search) | |
| { | |
| int err; | |
| u16 value, index; | |
| struct ds_status st; | |
| memset(buf, 0, sizeof(buf)); | |
| err = ds_send_data(ds_dev, (unsigned char *)&init, 8); | |
| if (err) | |
| return err; | |
| ds_wait_status(ds_dev, &st); | |
| value = COMM_SEARCH_ACCESS | COMM_IM | COMM_SM | COMM_F | COMM_RTS; | |
| index = (conditional_search ? 0xEC : 0xF0) | (id_number << 8); | |
| err = ds_send_control(ds_dev, value, index); | |
| if (err) | |
| return err; | |
| ds_wait_status(ds_dev, &st); | |
| err = ds_recv_data(ds_dev, (unsigned char *)buf, 8*id_number); | |
| if (err < 0) | |
| return err; | |
| return err/8; | |
| } | |
| static int ds_match_access(struct ds_device *dev, u64 init) | |
| { | |
| int err; | |
| struct ds_status st; | |
| err = ds_send_data(dev, (unsigned char *)&init, sizeof(init)); | |
| if (err) | |
| return err; | |
| ds_wait_status(dev, &st); | |
| err = ds_send_control(dev, COMM_MATCH_ACCESS | COMM_IM | COMM_RST, 0x0055); | |
| if (err) | |
| return err; | |
| ds_wait_status(dev, &st); | |
| return 0; | |
| } | |
| static int ds_set_path(struct ds_device *dev, u64 init) | |
| { | |
| int err; | |
| struct ds_status st; | |
| u8 buf[9]; | |
| memcpy(buf, &init, 8); | |
| buf[8] = BRANCH_MAIN; | |
| err = ds_send_data(dev, buf, sizeof(buf)); | |
| if (err) | |
| return err; | |
| ds_wait_status(dev, &st); | |
| err = ds_send_control(dev, COMM_SET_PATH | COMM_IM | COMM_RST, 0); | |
| if (err) | |
| return err; | |
| ds_wait_status(dev, &st); | |
| return 0; | |
| } | |
| #endif /* 0 */ | |
| static u8 ds9490r_touch_bit(void *data, u8 bit) | |
| { | |
| u8 ret; | |
| struct ds_device *dev = data; | |
| if (ds_touch_bit(dev, bit, &ret)) | |
| return 0; | |
| return ret; | |
| } | |
| static void ds9490r_write_bit(void *data, u8 bit) | |
| { | |
| struct ds_device *dev = data; | |
| ds_write_bit(dev, bit); | |
| } | |
| static void ds9490r_write_byte(void *data, u8 byte) | |
| { | |
| struct ds_device *dev = data; | |
| ds_write_byte(dev, byte); | |
| } | |
| static u8 ds9490r_read_bit(void *data) | |
| { | |
| struct ds_device *dev = data; | |
| int err; | |
| u8 bit = 0; | |
| err = ds_touch_bit(dev, 1, &bit); | |
| if (err) | |
| return 0; | |
| return bit & 1; | |
| } | |
| static u8 ds9490r_read_byte(void *data) | |
| { | |
| struct ds_device *dev = data; | |
| int err; | |
| u8 byte = 0; | |
| err = ds_read_byte(dev, &byte); | |
| if (err) | |
| return 0; | |
| return byte; | |
| } | |
| static void ds9490r_write_block(void *data, const u8 *buf, int len) | |
| { | |
| struct ds_device *dev = data; | |
| ds_write_block(dev, (u8 *)buf, len); | |
| } | |
| static u8 ds9490r_read_block(void *data, u8 *buf, int len) | |
| { | |
| struct ds_device *dev = data; | |
| int err; | |
| err = ds_read_block(dev, buf, len); | |
| if (err < 0) | |
| return 0; | |
| return len; | |
| } | |
| static u8 ds9490r_reset(void *data) | |
| { | |
| struct ds_device *dev = data; | |
| struct ds_status st; | |
| int err; | |
| memset(&st, 0, sizeof(st)); | |
| err = ds_reset(dev, &st); | |
| if (err) | |
| return 1; | |
| return 0; | |
| } | |
| static int ds_w1_init(struct ds_device *dev) | |
| { | |
| memset(&dev->master, 0, sizeof(struct w1_bus_master)); | |
| dev->master.data = dev; | |
| dev->master.touch_bit = &ds9490r_touch_bit; | |
| dev->master.read_bit = &ds9490r_read_bit; | |
| dev->master.write_bit = &ds9490r_write_bit; | |
| dev->master.read_byte = &ds9490r_read_byte; | |
| dev->master.write_byte = &ds9490r_write_byte; | |
| dev->master.read_block = &ds9490r_read_block; | |
| dev->master.write_block = &ds9490r_write_block; | |
| dev->master.reset_bus = &ds9490r_reset; | |
| return w1_add_master_device(&dev->master); | |
| } | |
| static void ds_w1_fini(struct ds_device *dev) | |
| { | |
| w1_remove_master_device(&dev->master); | |
| } | |
| static int ds_probe(struct usb_interface *intf, | |
| const struct usb_device_id *udev_id) | |
| { | |
| struct usb_device *udev = interface_to_usbdev(intf); | |
| struct usb_endpoint_descriptor *endpoint; | |
| struct usb_host_interface *iface_desc; | |
| struct ds_device *dev; | |
| int i, err; | |
| dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL); | |
| if (!dev) { | |
| printk(KERN_INFO "Failed to allocate new DS9490R structure.\n"); | |
| return -ENOMEM; | |
| } | |
| dev->udev = usb_get_dev(udev); | |
| if (!dev->udev) { | |
| err = -ENOMEM; | |
| goto err_out_free; | |
| } | |
| memset(dev->ep, 0, sizeof(dev->ep)); | |
| usb_set_intfdata(intf, dev); | |
| err = usb_set_interface(dev->udev, intf->altsetting[0].desc.bInterfaceNumber, 3); | |
| if (err) { | |
| printk(KERN_ERR "Failed to set alternative setting 3 for %d interface: err=%d.\n", | |
| intf->altsetting[0].desc.bInterfaceNumber, err); | |
| goto err_out_clear; | |
| } | |
| err = usb_reset_configuration(dev->udev); | |
| if (err) { | |
| printk(KERN_ERR "Failed to reset configuration: err=%d.\n", err); | |
| goto err_out_clear; | |
| } | |
| iface_desc = &intf->altsetting[0]; | |
| if (iface_desc->desc.bNumEndpoints != NUM_EP-1) { | |
| printk(KERN_INFO "Num endpoints=%d. It is not DS9490R.\n", iface_desc->desc.bNumEndpoints); | |
| err = -EINVAL; | |
| goto err_out_clear; | |
| } | |
| /* | |
| * This loop doesn'd show control 0 endpoint, | |
| * so we will fill only 1-3 endpoints entry. | |
| */ | |
| for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { | |
| endpoint = &iface_desc->endpoint[i].desc; | |
| dev->ep[i+1] = endpoint->bEndpointAddress; | |
| #if 0 | |
| printk("%d: addr=%x, size=%d, dir=%s, type=%x\n", | |
| i, endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize), | |
| (endpoint->bEndpointAddress & USB_DIR_IN)?"IN":"OUT", | |
| endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); | |
| #endif | |
| } | |
| err = ds_w1_init(dev); | |
| if (err) | |
| goto err_out_clear; | |
| mutex_lock(&ds_mutex); | |
| list_add_tail(&dev->ds_entry, &ds_devices); | |
| mutex_unlock(&ds_mutex); | |
| return 0; | |
| err_out_clear: | |
| usb_set_intfdata(intf, NULL); | |
| usb_put_dev(dev->udev); | |
| err_out_free: | |
| kfree(dev); | |
| return err; | |
| } | |
| static void ds_disconnect(struct usb_interface *intf) | |
| { | |
| struct ds_device *dev; | |
| dev = usb_get_intfdata(intf); | |
| if (!dev) | |
| return; | |
| mutex_lock(&ds_mutex); | |
| list_del(&dev->ds_entry); | |
| mutex_unlock(&ds_mutex); | |
| ds_w1_fini(dev); | |
| usb_set_intfdata(intf, NULL); | |
| usb_put_dev(dev->udev); | |
| kfree(dev); | |
| } | |
| static int ds_init(void) | |
| { | |
| int err; | |
| err = usb_register(&ds_driver); | |
| if (err) { | |
| printk(KERN_INFO "Failed to register DS9490R USB device: err=%d.\n", err); | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static void ds_fini(void) | |
| { | |
| usb_deregister(&ds_driver); | |
| } | |
| module_init(ds_init); | |
| module_exit(ds_fini); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>"); | |
| MODULE_DESCRIPTION("DS2490 USB <-> W1 bus master driver (DS9490*)"); |