| /* -*- mode: c; c-basic-offset: 8; -*- | |
| * vim: noexpandtab sw=8 ts=8 sts=0: | |
| * | |
| * super.c | |
| * | |
| * load/unload driver, mount/dismount volumes | |
| * | |
| * Copyright (C) 2002, 2004 Oracle. All rights reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public | |
| * License as published by the Free Software Foundation; either | |
| * version 2 of the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public | |
| * License along with this program; if not, write to the | |
| * Free Software Foundation, Inc., 59 Temple Place - Suite 330, | |
| * Boston, MA 021110-1307, USA. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/fs.h> | |
| #include <linux/types.h> | |
| #include <linux/slab.h> | |
| #include <linux/highmem.h> | |
| #include <linux/utsname.h> | |
| #include <linux/init.h> | |
| #include <linux/random.h> | |
| #include <linux/statfs.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/socket.h> | |
| #include <linux/inet.h> | |
| #include <linux/parser.h> | |
| #include <linux/crc32.h> | |
| #include <linux/debugfs.h> | |
| #include <cluster/nodemanager.h> | |
| #define MLOG_MASK_PREFIX ML_SUPER | |
| #include <cluster/masklog.h> | |
| #include "ocfs2.h" | |
| /* this should be the only file to include a version 1 header */ | |
| #include "ocfs1_fs_compat.h" | |
| #include "alloc.h" | |
| #include "dlmglue.h" | |
| #include "export.h" | |
| #include "extent_map.h" | |
| #include "heartbeat.h" | |
| #include "inode.h" | |
| #include "journal.h" | |
| #include "localalloc.h" | |
| #include "namei.h" | |
| #include "slot_map.h" | |
| #include "super.h" | |
| #include "sysfile.h" | |
| #include "uptodate.h" | |
| #include "ver.h" | |
| #include "vote.h" | |
| #include "buffer_head_io.h" | |
| static kmem_cache_t *ocfs2_inode_cachep = NULL; | |
| kmem_cache_t *ocfs2_lock_cache = NULL; | |
| /* OCFS2 needs to schedule several differnt types of work which | |
| * require cluster locking, disk I/O, recovery waits, etc. Since these | |
| * types of work tend to be heavy we avoid using the kernel events | |
| * workqueue and schedule on our own. */ | |
| struct workqueue_struct *ocfs2_wq = NULL; | |
| static struct dentry *ocfs2_debugfs_root = NULL; | |
| MODULE_AUTHOR("Oracle"); | |
| MODULE_LICENSE("GPL"); | |
| static int ocfs2_parse_options(struct super_block *sb, char *options, | |
| unsigned long *mount_opt, int is_remount); | |
| static void ocfs2_put_super(struct super_block *sb); | |
| static int ocfs2_mount_volume(struct super_block *sb); | |
| static int ocfs2_remount(struct super_block *sb, int *flags, char *data); | |
| static void ocfs2_dismount_volume(struct super_block *sb, int mnt_err); | |
| static int ocfs2_initialize_mem_caches(void); | |
| static void ocfs2_free_mem_caches(void); | |
| static void ocfs2_delete_osb(struct ocfs2_super *osb); | |
| static int ocfs2_statfs(struct dentry *dentry, struct kstatfs *buf); | |
| static int ocfs2_sync_fs(struct super_block *sb, int wait); | |
| static int ocfs2_init_global_system_inodes(struct ocfs2_super *osb); | |
| static int ocfs2_init_local_system_inodes(struct ocfs2_super *osb); | |
| static int ocfs2_release_system_inodes(struct ocfs2_super *osb); | |
| static int ocfs2_fill_local_node_info(struct ocfs2_super *osb); | |
| static int ocfs2_check_volume(struct ocfs2_super *osb); | |
| static int ocfs2_verify_volume(struct ocfs2_dinode *di, | |
| struct buffer_head *bh, | |
| u32 sectsize); | |
| static int ocfs2_initialize_super(struct super_block *sb, | |
| struct buffer_head *bh, | |
| int sector_size); | |
| static int ocfs2_get_sector(struct super_block *sb, | |
| struct buffer_head **bh, | |
| int block, | |
| int sect_size); | |
| static void ocfs2_write_super(struct super_block *sb); | |
| static struct inode *ocfs2_alloc_inode(struct super_block *sb); | |
| static void ocfs2_destroy_inode(struct inode *inode); | |
| static unsigned long long ocfs2_max_file_offset(unsigned int blockshift); | |
| static struct super_operations ocfs2_sops = { | |
| .statfs = ocfs2_statfs, | |
| .alloc_inode = ocfs2_alloc_inode, | |
| .destroy_inode = ocfs2_destroy_inode, | |
| .drop_inode = ocfs2_drop_inode, | |
| .clear_inode = ocfs2_clear_inode, | |
| .delete_inode = ocfs2_delete_inode, | |
| .sync_fs = ocfs2_sync_fs, | |
| .write_super = ocfs2_write_super, | |
| .put_super = ocfs2_put_super, | |
| .remount_fs = ocfs2_remount, | |
| }; | |
| enum { | |
| Opt_barrier, | |
| Opt_err_panic, | |
| Opt_err_ro, | |
| Opt_intr, | |
| Opt_nointr, | |
| Opt_hb_none, | |
| Opt_hb_local, | |
| Opt_data_ordered, | |
| Opt_data_writeback, | |
| Opt_err, | |
| }; | |
| static match_table_t tokens = { | |
| {Opt_barrier, "barrier=%u"}, | |
| {Opt_err_panic, "errors=panic"}, | |
| {Opt_err_ro, "errors=remount-ro"}, | |
| {Opt_intr, "intr"}, | |
| {Opt_nointr, "nointr"}, | |
| {Opt_hb_none, OCFS2_HB_NONE}, | |
| {Opt_hb_local, OCFS2_HB_LOCAL}, | |
| {Opt_data_ordered, "data=ordered"}, | |
| {Opt_data_writeback, "data=writeback"}, | |
| {Opt_err, NULL} | |
| }; | |
| /* | |
| * write_super and sync_fs ripped right out of ext3. | |
| */ | |
| static void ocfs2_write_super(struct super_block *sb) | |
| { | |
| if (mutex_trylock(&sb->s_lock) != 0) | |
| BUG(); | |
| sb->s_dirt = 0; | |
| } | |
| static int ocfs2_sync_fs(struct super_block *sb, int wait) | |
| { | |
| int status = 0; | |
| tid_t target; | |
| struct ocfs2_super *osb = OCFS2_SB(sb); | |
| sb->s_dirt = 0; | |
| if (ocfs2_is_hard_readonly(osb)) | |
| return -EROFS; | |
| if (wait) { | |
| status = ocfs2_flush_truncate_log(osb); | |
| if (status < 0) | |
| mlog_errno(status); | |
| } else { | |
| ocfs2_schedule_truncate_log_flush(osb, 0); | |
| } | |
| if (journal_start_commit(OCFS2_SB(sb)->journal->j_journal, &target)) { | |
| if (wait) | |
| log_wait_commit(OCFS2_SB(sb)->journal->j_journal, | |
| target); | |
| } | |
| return 0; | |
| } | |
| static int ocfs2_init_global_system_inodes(struct ocfs2_super *osb) | |
| { | |
| struct inode *new = NULL; | |
| int status = 0; | |
| int i; | |
| mlog_entry_void(); | |
| new = ocfs2_iget(osb, osb->root_blkno, OCFS2_FI_FLAG_SYSFILE); | |
| if (IS_ERR(new)) { | |
| status = PTR_ERR(new); | |
| mlog_errno(status); | |
| goto bail; | |
| } | |
| osb->root_inode = new; | |
| new = ocfs2_iget(osb, osb->system_dir_blkno, OCFS2_FI_FLAG_SYSFILE); | |
| if (IS_ERR(new)) { | |
| status = PTR_ERR(new); | |
| mlog_errno(status); | |
| goto bail; | |
| } | |
| osb->sys_root_inode = new; | |
| for (i = OCFS2_FIRST_ONLINE_SYSTEM_INODE; | |
| i <= OCFS2_LAST_GLOBAL_SYSTEM_INODE; i++) { | |
| new = ocfs2_get_system_file_inode(osb, i, osb->slot_num); | |
| if (!new) { | |
| ocfs2_release_system_inodes(osb); | |
| status = -EINVAL; | |
| mlog_errno(status); | |
| /* FIXME: Should ERROR_RO_FS */ | |
| mlog(ML_ERROR, "Unable to load system inode %d, " | |
| "possibly corrupt fs?", i); | |
| goto bail; | |
| } | |
| // the array now has one ref, so drop this one | |
| iput(new); | |
| } | |
| bail: | |
| mlog_exit(status); | |
| return status; | |
| } | |
| static int ocfs2_init_local_system_inodes(struct ocfs2_super *osb) | |
| { | |
| struct inode *new = NULL; | |
| int status = 0; | |
| int i; | |
| mlog_entry_void(); | |
| for (i = OCFS2_LAST_GLOBAL_SYSTEM_INODE + 1; | |
| i < NUM_SYSTEM_INODES; | |
| i++) { | |
| new = ocfs2_get_system_file_inode(osb, i, osb->slot_num); | |
| if (!new) { | |
| ocfs2_release_system_inodes(osb); | |
| status = -EINVAL; | |
| mlog(ML_ERROR, "status=%d, sysfile=%d, slot=%d\n", | |
| status, i, osb->slot_num); | |
| goto bail; | |
| } | |
| /* the array now has one ref, so drop this one */ | |
| iput(new); | |
| } | |
| bail: | |
| mlog_exit(status); | |
| return status; | |
| } | |
| static int ocfs2_release_system_inodes(struct ocfs2_super *osb) | |
| { | |
| int status = 0, i; | |
| struct inode *inode; | |
| mlog_entry_void(); | |
| for (i = 0; i < NUM_SYSTEM_INODES; i++) { | |
| inode = osb->system_inodes[i]; | |
| if (inode) { | |
| iput(inode); | |
| osb->system_inodes[i] = NULL; | |
| } | |
| } | |
| inode = osb->sys_root_inode; | |
| if (inode) { | |
| iput(inode); | |
| osb->sys_root_inode = NULL; | |
| } | |
| inode = osb->root_inode; | |
| if (inode) { | |
| iput(inode); | |
| osb->root_inode = NULL; | |
| } | |
| mlog_exit(status); | |
| return status; | |
| } | |
| /* We're allocating fs objects, use GFP_NOFS */ | |
| static struct inode *ocfs2_alloc_inode(struct super_block *sb) | |
| { | |
| struct ocfs2_inode_info *oi; | |
| oi = kmem_cache_alloc(ocfs2_inode_cachep, SLAB_NOFS); | |
| if (!oi) | |
| return NULL; | |
| return &oi->vfs_inode; | |
| } | |
| static void ocfs2_destroy_inode(struct inode *inode) | |
| { | |
| kmem_cache_free(ocfs2_inode_cachep, OCFS2_I(inode)); | |
| } | |
| /* From xfs_super.c:xfs_max_file_offset | |
| * Copyright (c) 2000-2004 Silicon Graphics, Inc. | |
| */ | |
| static unsigned long long ocfs2_max_file_offset(unsigned int blockshift) | |
| { | |
| unsigned int pagefactor = 1; | |
| unsigned int bitshift = BITS_PER_LONG - 1; | |
| /* Figure out maximum filesize, on Linux this can depend on | |
| * the filesystem blocksize (on 32 bit platforms). | |
| * __block_prepare_write does this in an [unsigned] long... | |
| * page->index << (PAGE_CACHE_SHIFT - bbits) | |
| * So, for page sized blocks (4K on 32 bit platforms), | |
| * this wraps at around 8Tb (hence MAX_LFS_FILESIZE which is | |
| * (((u64)PAGE_CACHE_SIZE << (BITS_PER_LONG-1))-1) | |
| * but for smaller blocksizes it is less (bbits = log2 bsize). | |
| * Note1: get_block_t takes a long (implicit cast from above) | |
| * Note2: The Large Block Device (LBD and HAVE_SECTOR_T) patch | |
| * can optionally convert the [unsigned] long from above into | |
| * an [unsigned] long long. | |
| */ | |
| #if BITS_PER_LONG == 32 | |
| # if defined(CONFIG_LBD) | |
| BUILD_BUG_ON(sizeof(sector_t) != 8); | |
| pagefactor = PAGE_CACHE_SIZE; | |
| bitshift = BITS_PER_LONG; | |
| # else | |
| pagefactor = PAGE_CACHE_SIZE >> (PAGE_CACHE_SHIFT - blockshift); | |
| # endif | |
| #endif | |
| return (((unsigned long long)pagefactor) << bitshift) - 1; | |
| } | |
| static int ocfs2_remount(struct super_block *sb, int *flags, char *data) | |
| { | |
| int incompat_features; | |
| int ret = 0; | |
| unsigned long parsed_options; | |
| struct ocfs2_super *osb = OCFS2_SB(sb); | |
| if (!ocfs2_parse_options(sb, data, &parsed_options, 1)) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| if ((osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL) != | |
| (parsed_options & OCFS2_MOUNT_HB_LOCAL)) { | |
| ret = -EINVAL; | |
| mlog(ML_ERROR, "Cannot change heartbeat mode on remount\n"); | |
| goto out; | |
| } | |
| if ((osb->s_mount_opt & OCFS2_MOUNT_DATA_WRITEBACK) != | |
| (parsed_options & OCFS2_MOUNT_DATA_WRITEBACK)) { | |
| ret = -EINVAL; | |
| mlog(ML_ERROR, "Cannot change data mode on remount\n"); | |
| goto out; | |
| } | |
| /* We're going to/from readonly mode. */ | |
| if ((*flags & MS_RDONLY) != (sb->s_flags & MS_RDONLY)) { | |
| /* Lock here so the check of HARD_RO and the potential | |
| * setting of SOFT_RO is atomic. */ | |
| spin_lock(&osb->osb_lock); | |
| if (osb->osb_flags & OCFS2_OSB_HARD_RO) { | |
| mlog(ML_ERROR, "Remount on readonly device is forbidden.\n"); | |
| ret = -EROFS; | |
| goto unlock_osb; | |
| } | |
| if (*flags & MS_RDONLY) { | |
| mlog(0, "Going to ro mode.\n"); | |
| sb->s_flags |= MS_RDONLY; | |
| osb->osb_flags |= OCFS2_OSB_SOFT_RO; | |
| } else { | |
| mlog(0, "Making ro filesystem writeable.\n"); | |
| if (osb->osb_flags & OCFS2_OSB_ERROR_FS) { | |
| mlog(ML_ERROR, "Cannot remount RDWR " | |
| "filesystem due to previous errors.\n"); | |
| ret = -EROFS; | |
| goto unlock_osb; | |
| } | |
| incompat_features = OCFS2_HAS_RO_COMPAT_FEATURE(sb, ~OCFS2_FEATURE_RO_COMPAT_SUPP); | |
| if (incompat_features) { | |
| mlog(ML_ERROR, "Cannot remount RDWR because " | |
| "of unsupported optional features " | |
| "(%x).\n", incompat_features); | |
| ret = -EINVAL; | |
| goto unlock_osb; | |
| } | |
| sb->s_flags &= ~MS_RDONLY; | |
| osb->osb_flags &= ~OCFS2_OSB_SOFT_RO; | |
| } | |
| unlock_osb: | |
| spin_unlock(&osb->osb_lock); | |
| } | |
| if (!ret) { | |
| if (!ocfs2_is_hard_readonly(osb)) | |
| ocfs2_set_journal_params(osb); | |
| /* Only save off the new mount options in case of a successful | |
| * remount. */ | |
| osb->s_mount_opt = parsed_options; | |
| } | |
| out: | |
| return ret; | |
| } | |
| static int ocfs2_sb_probe(struct super_block *sb, | |
| struct buffer_head **bh, | |
| int *sector_size) | |
| { | |
| int status = 0, tmpstat; | |
| struct ocfs1_vol_disk_hdr *hdr; | |
| struct ocfs2_dinode *di; | |
| int blksize; | |
| *bh = NULL; | |
| /* may be > 512 */ | |
| *sector_size = bdev_hardsect_size(sb->s_bdev); | |
| if (*sector_size > OCFS2_MAX_BLOCKSIZE) { | |
| mlog(ML_ERROR, "Hardware sector size too large: %d (max=%d)\n", | |
| *sector_size, OCFS2_MAX_BLOCKSIZE); | |
| status = -EINVAL; | |
| goto bail; | |
| } | |
| /* Can this really happen? */ | |
| if (*sector_size < OCFS2_MIN_BLOCKSIZE) | |
| *sector_size = OCFS2_MIN_BLOCKSIZE; | |
| /* check block zero for old format */ | |
| status = ocfs2_get_sector(sb, bh, 0, *sector_size); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto bail; | |
| } | |
| hdr = (struct ocfs1_vol_disk_hdr *) (*bh)->b_data; | |
| if (hdr->major_version == OCFS1_MAJOR_VERSION) { | |
| mlog(ML_ERROR, "incompatible version: %u.%u\n", | |
| hdr->major_version, hdr->minor_version); | |
| status = -EINVAL; | |
| } | |
| if (memcmp(hdr->signature, OCFS1_VOLUME_SIGNATURE, | |
| strlen(OCFS1_VOLUME_SIGNATURE)) == 0) { | |
| mlog(ML_ERROR, "incompatible volume signature: %8s\n", | |
| hdr->signature); | |
| status = -EINVAL; | |
| } | |
| brelse(*bh); | |
| *bh = NULL; | |
| if (status < 0) { | |
| mlog(ML_ERROR, "This is an ocfs v1 filesystem which must be " | |
| "upgraded before mounting with ocfs v2\n"); | |
| goto bail; | |
| } | |
| /* | |
| * Now check at magic offset for 512, 1024, 2048, 4096 | |
| * blocksizes. 4096 is the maximum blocksize because it is | |
| * the minimum clustersize. | |
| */ | |
| status = -EINVAL; | |
| for (blksize = *sector_size; | |
| blksize <= OCFS2_MAX_BLOCKSIZE; | |
| blksize <<= 1) { | |
| tmpstat = ocfs2_get_sector(sb, bh, | |
| OCFS2_SUPER_BLOCK_BLKNO, | |
| blksize); | |
| if (tmpstat < 0) { | |
| status = tmpstat; | |
| mlog_errno(status); | |
| goto bail; | |
| } | |
| di = (struct ocfs2_dinode *) (*bh)->b_data; | |
| status = ocfs2_verify_volume(di, *bh, blksize); | |
| if (status >= 0) | |
| goto bail; | |
| brelse(*bh); | |
| *bh = NULL; | |
| if (status != -EAGAIN) | |
| break; | |
| } | |
| bail: | |
| return status; | |
| } | |
| static int ocfs2_fill_super(struct super_block *sb, void *data, int silent) | |
| { | |
| struct dentry *root; | |
| int status, sector_size; | |
| unsigned long parsed_opt; | |
| struct inode *inode = NULL; | |
| struct ocfs2_super *osb = NULL; | |
| struct buffer_head *bh = NULL; | |
| mlog_entry("%p, %p, %i", sb, data, silent); | |
| /* for now we only have one cluster/node, make sure we see it | |
| * in the heartbeat universe */ | |
| if (!o2hb_check_local_node_heartbeating()) { | |
| status = -EINVAL; | |
| goto read_super_error; | |
| } | |
| /* probe for superblock */ | |
| status = ocfs2_sb_probe(sb, &bh, §or_size); | |
| if (status < 0) { | |
| mlog(ML_ERROR, "superblock probe failed!\n"); | |
| goto read_super_error; | |
| } | |
| status = ocfs2_initialize_super(sb, bh, sector_size); | |
| osb = OCFS2_SB(sb); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto read_super_error; | |
| } | |
| brelse(bh); | |
| bh = NULL; | |
| if (!ocfs2_parse_options(sb, data, &parsed_opt, 0)) { | |
| status = -EINVAL; | |
| goto read_super_error; | |
| } | |
| osb->s_mount_opt = parsed_opt; | |
| sb->s_magic = OCFS2_SUPER_MAGIC; | |
| /* Hard readonly mode only if: bdev_read_only, MS_RDONLY, | |
| * heartbeat=none */ | |
| if (bdev_read_only(sb->s_bdev)) { | |
| if (!(sb->s_flags & MS_RDONLY)) { | |
| status = -EACCES; | |
| mlog(ML_ERROR, "Readonly device detected but readonly " | |
| "mount was not specified.\n"); | |
| goto read_super_error; | |
| } | |
| /* You should not be able to start a local heartbeat | |
| * on a readonly device. */ | |
| if (osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL) { | |
| status = -EROFS; | |
| mlog(ML_ERROR, "Local heartbeat specified on readonly " | |
| "device.\n"); | |
| goto read_super_error; | |
| } | |
| status = ocfs2_check_journals_nolocks(osb); | |
| if (status < 0) { | |
| if (status == -EROFS) | |
| mlog(ML_ERROR, "Recovery required on readonly " | |
| "file system, but write access is " | |
| "unavailable.\n"); | |
| else | |
| mlog_errno(status); | |
| goto read_super_error; | |
| } | |
| ocfs2_set_ro_flag(osb, 1); | |
| printk(KERN_NOTICE "Readonly device detected. No cluster " | |
| "services will be utilized for this mount. Recovery " | |
| "will be skipped.\n"); | |
| } | |
| if (!ocfs2_is_hard_readonly(osb)) { | |
| /* If this isn't a hard readonly mount, then we need | |
| * to make sure that heartbeat is in a valid state, | |
| * and that we mark ourselves soft readonly is -oro | |
| * was specified. */ | |
| if (!(osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL)) { | |
| mlog(ML_ERROR, "No heartbeat for device (%s)\n", | |
| sb->s_id); | |
| status = -EINVAL; | |
| goto read_super_error; | |
| } | |
| if (sb->s_flags & MS_RDONLY) | |
| ocfs2_set_ro_flag(osb, 0); | |
| } | |
| osb->osb_debug_root = debugfs_create_dir(osb->uuid_str, | |
| ocfs2_debugfs_root); | |
| if (!osb->osb_debug_root) { | |
| status = -EINVAL; | |
| mlog(ML_ERROR, "Unable to create per-mount debugfs root.\n"); | |
| goto read_super_error; | |
| } | |
| status = ocfs2_mount_volume(sb); | |
| if (osb->root_inode) | |
| inode = igrab(osb->root_inode); | |
| if (status < 0) | |
| goto read_super_error; | |
| if (!inode) { | |
| status = -EIO; | |
| mlog_errno(status); | |
| goto read_super_error; | |
| } | |
| root = d_alloc_root(inode); | |
| if (!root) { | |
| status = -ENOMEM; | |
| mlog_errno(status); | |
| goto read_super_error; | |
| } | |
| sb->s_root = root; | |
| ocfs2_complete_mount_recovery(osb); | |
| printk(KERN_INFO "ocfs2: Mounting device (%s) on (node %d, slot %d) " | |
| "with %s data mode.\n", | |
| osb->dev_str, osb->node_num, osb->slot_num, | |
| osb->s_mount_opt & OCFS2_MOUNT_DATA_WRITEBACK ? "writeback" : | |
| "ordered"); | |
| atomic_set(&osb->vol_state, VOLUME_MOUNTED); | |
| wake_up(&osb->osb_mount_event); | |
| mlog_exit(status); | |
| return status; | |
| read_super_error: | |
| if (bh != NULL) | |
| brelse(bh); | |
| if (inode) | |
| iput(inode); | |
| if (osb) { | |
| atomic_set(&osb->vol_state, VOLUME_DISABLED); | |
| wake_up(&osb->osb_mount_event); | |
| ocfs2_dismount_volume(sb, 1); | |
| } | |
| mlog_exit(status); | |
| return status; | |
| } | |
| static int ocfs2_get_sb(struct file_system_type *fs_type, | |
| int flags, | |
| const char *dev_name, | |
| void *data, | |
| struct vfsmount *mnt) | |
| { | |
| return get_sb_bdev(fs_type, flags, dev_name, data, ocfs2_fill_super, | |
| mnt); | |
| } | |
| static struct file_system_type ocfs2_fs_type = { | |
| .owner = THIS_MODULE, | |
| .name = "ocfs2", | |
| .get_sb = ocfs2_get_sb, /* is this called when we mount | |
| * the fs? */ | |
| .kill_sb = kill_block_super, /* set to the generic one | |
| * right now, but do we | |
| * need to change that? */ | |
| .fs_flags = FS_REQUIRES_DEV|FS_RENAME_DOES_D_MOVE, | |
| .next = NULL | |
| }; | |
| static int ocfs2_parse_options(struct super_block *sb, | |
| char *options, | |
| unsigned long *mount_opt, | |
| int is_remount) | |
| { | |
| int status; | |
| char *p; | |
| mlog_entry("remount: %d, options: \"%s\"\n", is_remount, | |
| options ? options : "(none)"); | |
| *mount_opt = 0; | |
| if (!options) { | |
| status = 1; | |
| goto bail; | |
| } | |
| while ((p = strsep(&options, ",")) != NULL) { | |
| int token, option; | |
| substring_t args[MAX_OPT_ARGS]; | |
| if (!*p) | |
| continue; | |
| token = match_token(p, tokens, args); | |
| switch (token) { | |
| case Opt_hb_local: | |
| *mount_opt |= OCFS2_MOUNT_HB_LOCAL; | |
| break; | |
| case Opt_hb_none: | |
| *mount_opt &= ~OCFS2_MOUNT_HB_LOCAL; | |
| break; | |
| case Opt_barrier: | |
| if (match_int(&args[0], &option)) { | |
| status = 0; | |
| goto bail; | |
| } | |
| if (option) | |
| *mount_opt |= OCFS2_MOUNT_BARRIER; | |
| else | |
| *mount_opt &= ~OCFS2_MOUNT_BARRIER; | |
| break; | |
| case Opt_intr: | |
| *mount_opt &= ~OCFS2_MOUNT_NOINTR; | |
| break; | |
| case Opt_nointr: | |
| *mount_opt |= OCFS2_MOUNT_NOINTR; | |
| break; | |
| case Opt_err_panic: | |
| *mount_opt |= OCFS2_MOUNT_ERRORS_PANIC; | |
| break; | |
| case Opt_err_ro: | |
| *mount_opt &= ~OCFS2_MOUNT_ERRORS_PANIC; | |
| break; | |
| case Opt_data_ordered: | |
| *mount_opt &= ~OCFS2_MOUNT_DATA_WRITEBACK; | |
| break; | |
| case Opt_data_writeback: | |
| *mount_opt |= OCFS2_MOUNT_DATA_WRITEBACK; | |
| break; | |
| default: | |
| mlog(ML_ERROR, | |
| "Unrecognized mount option \"%s\" " | |
| "or missing value\n", p); | |
| status = 0; | |
| goto bail; | |
| } | |
| } | |
| status = 1; | |
| bail: | |
| mlog_exit(status); | |
| return status; | |
| } | |
| static int __init ocfs2_init(void) | |
| { | |
| int status; | |
| mlog_entry_void(); | |
| ocfs2_print_version(); | |
| if (init_ocfs2_extent_maps()) | |
| return -ENOMEM; | |
| status = init_ocfs2_uptodate_cache(); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto leave; | |
| } | |
| status = ocfs2_initialize_mem_caches(); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto leave; | |
| } | |
| ocfs2_wq = create_singlethread_workqueue("ocfs2_wq"); | |
| if (!ocfs2_wq) { | |
| status = -ENOMEM; | |
| goto leave; | |
| } | |
| ocfs2_debugfs_root = debugfs_create_dir("ocfs2", NULL); | |
| if (!ocfs2_debugfs_root) { | |
| status = -EFAULT; | |
| mlog(ML_ERROR, "Unable to create ocfs2 debugfs root.\n"); | |
| } | |
| leave: | |
| if (status < 0) { | |
| ocfs2_free_mem_caches(); | |
| exit_ocfs2_uptodate_cache(); | |
| exit_ocfs2_extent_maps(); | |
| } | |
| mlog_exit(status); | |
| if (status >= 0) { | |
| return register_filesystem(&ocfs2_fs_type); | |
| } else | |
| return -1; | |
| } | |
| static void __exit ocfs2_exit(void) | |
| { | |
| mlog_entry_void(); | |
| if (ocfs2_wq) { | |
| flush_workqueue(ocfs2_wq); | |
| destroy_workqueue(ocfs2_wq); | |
| } | |
| debugfs_remove(ocfs2_debugfs_root); | |
| ocfs2_free_mem_caches(); | |
| unregister_filesystem(&ocfs2_fs_type); | |
| exit_ocfs2_extent_maps(); | |
| exit_ocfs2_uptodate_cache(); | |
| mlog_exit_void(); | |
| } | |
| static void ocfs2_put_super(struct super_block *sb) | |
| { | |
| mlog_entry("(0x%p)\n", sb); | |
| ocfs2_sync_blockdev(sb); | |
| ocfs2_dismount_volume(sb, 0); | |
| mlog_exit_void(); | |
| } | |
| static int ocfs2_statfs(struct dentry *dentry, struct kstatfs *buf) | |
| { | |
| struct ocfs2_super *osb; | |
| u32 numbits, freebits; | |
| int status; | |
| struct ocfs2_dinode *bm_lock; | |
| struct buffer_head *bh = NULL; | |
| struct inode *inode = NULL; | |
| mlog_entry("(%p, %p)\n", dentry->d_sb, buf); | |
| osb = OCFS2_SB(dentry->d_sb); | |
| inode = ocfs2_get_system_file_inode(osb, | |
| GLOBAL_BITMAP_SYSTEM_INODE, | |
| OCFS2_INVALID_SLOT); | |
| if (!inode) { | |
| mlog(ML_ERROR, "failed to get bitmap inode\n"); | |
| status = -EIO; | |
| goto bail; | |
| } | |
| status = ocfs2_meta_lock(inode, NULL, &bh, 0); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto bail; | |
| } | |
| bm_lock = (struct ocfs2_dinode *) bh->b_data; | |
| numbits = le32_to_cpu(bm_lock->id1.bitmap1.i_total); | |
| freebits = numbits - le32_to_cpu(bm_lock->id1.bitmap1.i_used); | |
| buf->f_type = OCFS2_SUPER_MAGIC; | |
| buf->f_bsize = dentry->d_sb->s_blocksize; | |
| buf->f_namelen = OCFS2_MAX_FILENAME_LEN; | |
| buf->f_blocks = ((sector_t) numbits) * | |
| (osb->s_clustersize >> osb->sb->s_blocksize_bits); | |
| buf->f_bfree = ((sector_t) freebits) * | |
| (osb->s_clustersize >> osb->sb->s_blocksize_bits); | |
| buf->f_bavail = buf->f_bfree; | |
| buf->f_files = numbits; | |
| buf->f_ffree = freebits; | |
| brelse(bh); | |
| ocfs2_meta_unlock(inode, 0); | |
| status = 0; | |
| bail: | |
| if (inode) | |
| iput(inode); | |
| mlog_exit(status); | |
| return status; | |
| } | |
| static void ocfs2_inode_init_once(void *data, | |
| kmem_cache_t *cachep, | |
| unsigned long flags) | |
| { | |
| struct ocfs2_inode_info *oi = data; | |
| if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) == | |
| SLAB_CTOR_CONSTRUCTOR) { | |
| oi->ip_flags = 0; | |
| oi->ip_open_count = 0; | |
| spin_lock_init(&oi->ip_lock); | |
| ocfs2_extent_map_init(&oi->vfs_inode); | |
| INIT_LIST_HEAD(&oi->ip_handle_list); | |
| INIT_LIST_HEAD(&oi->ip_io_markers); | |
| oi->ip_handle = NULL; | |
| oi->ip_created_trans = 0; | |
| oi->ip_last_trans = 0; | |
| oi->ip_dir_start_lookup = 0; | |
| init_rwsem(&oi->ip_alloc_sem); | |
| mutex_init(&oi->ip_io_mutex); | |
| oi->ip_blkno = 0ULL; | |
| oi->ip_clusters = 0; | |
| ocfs2_lock_res_init_once(&oi->ip_rw_lockres); | |
| ocfs2_lock_res_init_once(&oi->ip_meta_lockres); | |
| ocfs2_lock_res_init_once(&oi->ip_data_lockres); | |
| ocfs2_metadata_cache_init(&oi->vfs_inode); | |
| inode_init_once(&oi->vfs_inode); | |
| } | |
| } | |
| static int ocfs2_initialize_mem_caches(void) | |
| { | |
| ocfs2_inode_cachep = kmem_cache_create("ocfs2_inode_cache", | |
| sizeof(struct ocfs2_inode_info), | |
| 0, | |
| (SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT| | |
| SLAB_MEM_SPREAD), | |
| ocfs2_inode_init_once, NULL); | |
| if (!ocfs2_inode_cachep) | |
| return -ENOMEM; | |
| ocfs2_lock_cache = kmem_cache_create("ocfs2_lock", | |
| sizeof(struct ocfs2_journal_lock), | |
| 0, | |
| SLAB_HWCACHE_ALIGN, | |
| NULL, NULL); | |
| if (!ocfs2_lock_cache) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| static void ocfs2_free_mem_caches(void) | |
| { | |
| if (ocfs2_inode_cachep) | |
| kmem_cache_destroy(ocfs2_inode_cachep); | |
| if (ocfs2_lock_cache) | |
| kmem_cache_destroy(ocfs2_lock_cache); | |
| ocfs2_inode_cachep = NULL; | |
| ocfs2_lock_cache = NULL; | |
| } | |
| static int ocfs2_get_sector(struct super_block *sb, | |
| struct buffer_head **bh, | |
| int block, | |
| int sect_size) | |
| { | |
| if (!sb_set_blocksize(sb, sect_size)) { | |
| mlog(ML_ERROR, "unable to set blocksize\n"); | |
| return -EIO; | |
| } | |
| *bh = sb_getblk(sb, block); | |
| if (!*bh) { | |
| mlog_errno(-EIO); | |
| return -EIO; | |
| } | |
| lock_buffer(*bh); | |
| if (!buffer_dirty(*bh)) | |
| clear_buffer_uptodate(*bh); | |
| unlock_buffer(*bh); | |
| ll_rw_block(READ, 1, bh); | |
| wait_on_buffer(*bh); | |
| return 0; | |
| } | |
| /* ocfs2 1.0 only allows one cluster and node identity per kernel image. */ | |
| static int ocfs2_fill_local_node_info(struct ocfs2_super *osb) | |
| { | |
| int status; | |
| /* XXX hold a ref on the node while mounte? easy enough, if | |
| * desirable. */ | |
| osb->node_num = o2nm_this_node(); | |
| if (osb->node_num == O2NM_MAX_NODES) { | |
| mlog(ML_ERROR, "could not find this host's node number\n"); | |
| status = -ENOENT; | |
| goto bail; | |
| } | |
| mlog(0, "I am node %d\n", osb->node_num); | |
| status = 0; | |
| bail: | |
| return status; | |
| } | |
| static int ocfs2_mount_volume(struct super_block *sb) | |
| { | |
| int status = 0; | |
| int unlock_super = 0; | |
| struct ocfs2_super *osb = OCFS2_SB(sb); | |
| mlog_entry_void(); | |
| if (ocfs2_is_hard_readonly(osb)) | |
| goto leave; | |
| status = ocfs2_fill_local_node_info(osb); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto leave; | |
| } | |
| status = ocfs2_register_hb_callbacks(osb); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto leave; | |
| } | |
| status = ocfs2_dlm_init(osb); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto leave; | |
| } | |
| /* requires vote_thread to be running. */ | |
| status = ocfs2_register_net_handlers(osb); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto leave; | |
| } | |
| status = ocfs2_super_lock(osb, 1); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto leave; | |
| } | |
| unlock_super = 1; | |
| /* This will load up the node map and add ourselves to it. */ | |
| status = ocfs2_find_slot(osb); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto leave; | |
| } | |
| ocfs2_populate_mounted_map(osb); | |
| /* load all node-local system inodes */ | |
| status = ocfs2_init_local_system_inodes(osb); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto leave; | |
| } | |
| status = ocfs2_check_volume(osb); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto leave; | |
| } | |
| status = ocfs2_truncate_log_init(osb); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto leave; | |
| } | |
| /* This should be sent *after* we recovered our journal as it | |
| * will cause other nodes to unmark us as needing | |
| * recovery. However, we need to send it *before* dropping the | |
| * super block lock as otherwise their recovery threads might | |
| * try to clean us up while we're live! */ | |
| status = ocfs2_request_mount_vote(osb); | |
| if (status < 0) | |
| mlog_errno(status); | |
| leave: | |
| if (unlock_super) | |
| ocfs2_super_unlock(osb, 1); | |
| mlog_exit(status); | |
| return status; | |
| } | |
| /* we can't grab the goofy sem lock from inside wait_event, so we use | |
| * memory barriers to make sure that we'll see the null task before | |
| * being woken up */ | |
| static int ocfs2_recovery_thread_running(struct ocfs2_super *osb) | |
| { | |
| mb(); | |
| return osb->recovery_thread_task != NULL; | |
| } | |
| static void ocfs2_dismount_volume(struct super_block *sb, int mnt_err) | |
| { | |
| int tmp; | |
| struct ocfs2_super *osb = NULL; | |
| mlog_entry("(0x%p)\n", sb); | |
| BUG_ON(!sb); | |
| osb = OCFS2_SB(sb); | |
| BUG_ON(!osb); | |
| ocfs2_shutdown_local_alloc(osb); | |
| ocfs2_truncate_log_shutdown(osb); | |
| /* disable any new recovery threads and wait for any currently | |
| * running ones to exit. Do this before setting the vol_state. */ | |
| mutex_lock(&osb->recovery_lock); | |
| osb->disable_recovery = 1; | |
| mutex_unlock(&osb->recovery_lock); | |
| wait_event(osb->recovery_event, !ocfs2_recovery_thread_running(osb)); | |
| /* At this point, we know that no more recovery threads can be | |
| * launched, so wait for any recovery completion work to | |
| * complete. */ | |
| flush_workqueue(ocfs2_wq); | |
| ocfs2_journal_shutdown(osb); | |
| ocfs2_sync_blockdev(sb); | |
| /* No dlm means we've failed during mount, so skip all the | |
| * steps which depended on that to complete. */ | |
| if (osb->dlm) { | |
| tmp = ocfs2_super_lock(osb, 1); | |
| if (tmp < 0) { | |
| mlog_errno(tmp); | |
| return; | |
| } | |
| tmp = ocfs2_request_umount_vote(osb); | |
| if (tmp < 0) | |
| mlog_errno(tmp); | |
| if (osb->slot_num != OCFS2_INVALID_SLOT) | |
| ocfs2_put_slot(osb); | |
| ocfs2_super_unlock(osb, 1); | |
| } | |
| ocfs2_release_system_inodes(osb); | |
| if (osb->dlm) { | |
| ocfs2_unregister_net_handlers(osb); | |
| ocfs2_dlm_shutdown(osb); | |
| } | |
| ocfs2_clear_hb_callbacks(osb); | |
| debugfs_remove(osb->osb_debug_root); | |
| if (!mnt_err) | |
| ocfs2_stop_heartbeat(osb); | |
| atomic_set(&osb->vol_state, VOLUME_DISMOUNTED); | |
| printk(KERN_INFO "ocfs2: Unmounting device (%s) on (node %d)\n", | |
| osb->dev_str, osb->node_num); | |
| ocfs2_delete_osb(osb); | |
| kfree(osb); | |
| sb->s_dev = 0; | |
| sb->s_fs_info = NULL; | |
| } | |
| static int ocfs2_setup_osb_uuid(struct ocfs2_super *osb, const unsigned char *uuid, | |
| unsigned uuid_bytes) | |
| { | |
| int i, ret; | |
| char *ptr; | |
| BUG_ON(uuid_bytes != OCFS2_VOL_UUID_LEN); | |
| osb->uuid_str = kcalloc(1, OCFS2_VOL_UUID_LEN * 2 + 1, GFP_KERNEL); | |
| if (osb->uuid_str == NULL) | |
| return -ENOMEM; | |
| for (i = 0, ptr = osb->uuid_str; i < OCFS2_VOL_UUID_LEN; i++) { | |
| /* print with null */ | |
| ret = snprintf(ptr, 3, "%02X", uuid[i]); | |
| if (ret != 2) /* drop super cleans up */ | |
| return -EINVAL; | |
| /* then only advance past the last char */ | |
| ptr += 2; | |
| } | |
| return 0; | |
| } | |
| static int ocfs2_initialize_super(struct super_block *sb, | |
| struct buffer_head *bh, | |
| int sector_size) | |
| { | |
| int status = 0; | |
| int i; | |
| struct ocfs2_dinode *di = NULL; | |
| struct inode *inode = NULL; | |
| struct buffer_head *bitmap_bh = NULL; | |
| struct ocfs2_journal *journal; | |
| __le32 uuid_net_key; | |
| struct ocfs2_super *osb; | |
| mlog_entry_void(); | |
| osb = kcalloc(1, sizeof(struct ocfs2_super), GFP_KERNEL); | |
| if (!osb) { | |
| status = -ENOMEM; | |
| mlog_errno(status); | |
| goto bail; | |
| } | |
| sb->s_fs_info = osb; | |
| sb->s_op = &ocfs2_sops; | |
| sb->s_export_op = &ocfs2_export_ops; | |
| sb->s_flags |= MS_NOATIME; | |
| /* this is needed to support O_LARGEFILE */ | |
| sb->s_maxbytes = ocfs2_max_file_offset(sb->s_blocksize_bits); | |
| osb->sb = sb; | |
| /* Save off for ocfs2_rw_direct */ | |
| osb->s_sectsize_bits = blksize_bits(sector_size); | |
| BUG_ON(!osb->s_sectsize_bits); | |
| osb->net_response_ids = 0; | |
| spin_lock_init(&osb->net_response_lock); | |
| INIT_LIST_HEAD(&osb->net_response_list); | |
| INIT_LIST_HEAD(&osb->osb_net_handlers); | |
| init_waitqueue_head(&osb->recovery_event); | |
| spin_lock_init(&osb->vote_task_lock); | |
| init_waitqueue_head(&osb->vote_event); | |
| osb->vote_work_sequence = 0; | |
| osb->vote_wake_sequence = 0; | |
| INIT_LIST_HEAD(&osb->blocked_lock_list); | |
| osb->blocked_lock_count = 0; | |
| INIT_LIST_HEAD(&osb->vote_list); | |
| spin_lock_init(&osb->osb_lock); | |
| atomic_set(&osb->alloc_stats.moves, 0); | |
| atomic_set(&osb->alloc_stats.local_data, 0); | |
| atomic_set(&osb->alloc_stats.bitmap_data, 0); | |
| atomic_set(&osb->alloc_stats.bg_allocs, 0); | |
| atomic_set(&osb->alloc_stats.bg_extends, 0); | |
| ocfs2_init_node_maps(osb); | |
| snprintf(osb->dev_str, sizeof(osb->dev_str), "%u,%u", | |
| MAJOR(osb->sb->s_dev), MINOR(osb->sb->s_dev)); | |
| mutex_init(&osb->recovery_lock); | |
| osb->disable_recovery = 0; | |
| osb->recovery_thread_task = NULL; | |
| init_waitqueue_head(&osb->checkpoint_event); | |
| atomic_set(&osb->needs_checkpoint, 0); | |
| osb->node_num = O2NM_INVALID_NODE_NUM; | |
| osb->slot_num = OCFS2_INVALID_SLOT; | |
| osb->local_alloc_state = OCFS2_LA_UNUSED; | |
| osb->local_alloc_bh = NULL; | |
| ocfs2_setup_hb_callbacks(osb); | |
| init_waitqueue_head(&osb->osb_mount_event); | |
| osb->vol_label = kmalloc(OCFS2_MAX_VOL_LABEL_LEN, GFP_KERNEL); | |
| if (!osb->vol_label) { | |
| mlog(ML_ERROR, "unable to alloc vol label\n"); | |
| status = -ENOMEM; | |
| goto bail; | |
| } | |
| di = (struct ocfs2_dinode *)bh->b_data; | |
| osb->max_slots = le16_to_cpu(di->id2.i_super.s_max_slots); | |
| if (osb->max_slots > OCFS2_MAX_SLOTS || osb->max_slots == 0) { | |
| mlog(ML_ERROR, "Invalid number of node slots (%u)\n", | |
| osb->max_slots); | |
| status = -EINVAL; | |
| goto bail; | |
| } | |
| mlog(0, "max_slots for this device: %u\n", osb->max_slots); | |
| init_waitqueue_head(&osb->osb_wipe_event); | |
| osb->osb_orphan_wipes = kcalloc(osb->max_slots, | |
| sizeof(*osb->osb_orphan_wipes), | |
| GFP_KERNEL); | |
| if (!osb->osb_orphan_wipes) { | |
| status = -ENOMEM; | |
| mlog_errno(status); | |
| goto bail; | |
| } | |
| osb->s_feature_compat = | |
| le32_to_cpu(OCFS2_RAW_SB(di)->s_feature_compat); | |
| osb->s_feature_ro_compat = | |
| le32_to_cpu(OCFS2_RAW_SB(di)->s_feature_ro_compat); | |
| osb->s_feature_incompat = | |
| le32_to_cpu(OCFS2_RAW_SB(di)->s_feature_incompat); | |
| if ((i = OCFS2_HAS_INCOMPAT_FEATURE(osb->sb, ~OCFS2_FEATURE_INCOMPAT_SUPP))) { | |
| mlog(ML_ERROR, "couldn't mount because of unsupported " | |
| "optional features (%x).\n", i); | |
| status = -EINVAL; | |
| goto bail; | |
| } | |
| if (!(osb->sb->s_flags & MS_RDONLY) && | |
| (i = OCFS2_HAS_RO_COMPAT_FEATURE(osb->sb, ~OCFS2_FEATURE_RO_COMPAT_SUPP))) { | |
| mlog(ML_ERROR, "couldn't mount RDWR because of " | |
| "unsupported optional features (%x).\n", i); | |
| status = -EINVAL; | |
| goto bail; | |
| } | |
| get_random_bytes(&osb->s_next_generation, sizeof(u32)); | |
| /* FIXME | |
| * This should be done in ocfs2_journal_init(), but unknown | |
| * ordering issues will cause the filesystem to crash. | |
| * If anyone wants to figure out what part of the code | |
| * refers to osb->journal before ocfs2_journal_init() is run, | |
| * be my guest. | |
| */ | |
| /* initialize our journal structure */ | |
| journal = kcalloc(1, sizeof(struct ocfs2_journal), GFP_KERNEL); | |
| if (!journal) { | |
| mlog(ML_ERROR, "unable to alloc journal\n"); | |
| status = -ENOMEM; | |
| goto bail; | |
| } | |
| osb->journal = journal; | |
| journal->j_osb = osb; | |
| atomic_set(&journal->j_num_trans, 0); | |
| init_rwsem(&journal->j_trans_barrier); | |
| init_waitqueue_head(&journal->j_checkpointed); | |
| spin_lock_init(&journal->j_lock); | |
| journal->j_trans_id = (unsigned long) 1; | |
| INIT_LIST_HEAD(&journal->j_la_cleanups); | |
| INIT_WORK(&journal->j_recovery_work, ocfs2_complete_recovery, osb); | |
| journal->j_state = OCFS2_JOURNAL_FREE; | |
| /* get some pseudo constants for clustersize bits */ | |
| osb->s_clustersize_bits = | |
| le32_to_cpu(di->id2.i_super.s_clustersize_bits); | |
| osb->s_clustersize = 1 << osb->s_clustersize_bits; | |
| mlog(0, "clusterbits=%d\n", osb->s_clustersize_bits); | |
| if (osb->s_clustersize < OCFS2_MIN_CLUSTERSIZE || | |
| osb->s_clustersize > OCFS2_MAX_CLUSTERSIZE) { | |
| mlog(ML_ERROR, "Volume has invalid cluster size (%d)\n", | |
| osb->s_clustersize); | |
| status = -EINVAL; | |
| goto bail; | |
| } | |
| if (ocfs2_clusters_to_blocks(osb->sb, le32_to_cpu(di->i_clusters) - 1) | |
| > (u32)~0UL) { | |
| mlog(ML_ERROR, "Volume might try to write to blocks beyond " | |
| "what jbd can address in 32 bits.\n"); | |
| status = -EINVAL; | |
| goto bail; | |
| } | |
| if (ocfs2_setup_osb_uuid(osb, di->id2.i_super.s_uuid, | |
| sizeof(di->id2.i_super.s_uuid))) { | |
| mlog(ML_ERROR, "Out of memory trying to setup our uuid.\n"); | |
| status = -ENOMEM; | |
| goto bail; | |
| } | |
| memcpy(&uuid_net_key, di->id2.i_super.s_uuid, sizeof(uuid_net_key)); | |
| osb->net_key = le32_to_cpu(uuid_net_key); | |
| strncpy(osb->vol_label, di->id2.i_super.s_label, 63); | |
| osb->vol_label[63] = '\0'; | |
| osb->root_blkno = le64_to_cpu(di->id2.i_super.s_root_blkno); | |
| osb->system_dir_blkno = le64_to_cpu(di->id2.i_super.s_system_dir_blkno); | |
| osb->first_cluster_group_blkno = | |
| le64_to_cpu(di->id2.i_super.s_first_cluster_group); | |
| osb->fs_generation = le32_to_cpu(di->i_fs_generation); | |
| mlog(0, "vol_label: %s\n", osb->vol_label); | |
| mlog(0, "uuid: %s\n", osb->uuid_str); | |
| mlog(0, "root_blkno=%llu, system_dir_blkno=%llu\n", | |
| (unsigned long long)osb->root_blkno, | |
| (unsigned long long)osb->system_dir_blkno); | |
| osb->osb_dlm_debug = ocfs2_new_dlm_debug(); | |
| if (!osb->osb_dlm_debug) { | |
| status = -ENOMEM; | |
| mlog_errno(status); | |
| goto bail; | |
| } | |
| atomic_set(&osb->vol_state, VOLUME_INIT); | |
| /* load root, system_dir, and all global system inodes */ | |
| status = ocfs2_init_global_system_inodes(osb); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto bail; | |
| } | |
| /* | |
| * global bitmap | |
| */ | |
| inode = ocfs2_get_system_file_inode(osb, GLOBAL_BITMAP_SYSTEM_INODE, | |
| OCFS2_INVALID_SLOT); | |
| if (!inode) { | |
| status = -EINVAL; | |
| mlog_errno(status); | |
| goto bail; | |
| } | |
| osb->bitmap_blkno = OCFS2_I(inode)->ip_blkno; | |
| /* We don't have a cluster lock on the bitmap here because | |
| * we're only interested in static information and the extra | |
| * complexity at mount time isn't worht it. Don't pass the | |
| * inode in to the read function though as we don't want it to | |
| * be put in the cache. */ | |
| status = ocfs2_read_block(osb, osb->bitmap_blkno, &bitmap_bh, 0, | |
| NULL); | |
| iput(inode); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto bail; | |
| } | |
| di = (struct ocfs2_dinode *) bitmap_bh->b_data; | |
| osb->bitmap_cpg = le16_to_cpu(di->id2.i_chain.cl_cpg); | |
| brelse(bitmap_bh); | |
| mlog(0, "cluster bitmap inode: %llu, clusters per group: %u\n", | |
| (unsigned long long)osb->bitmap_blkno, osb->bitmap_cpg); | |
| status = ocfs2_init_slot_info(osb); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto bail; | |
| } | |
| bail: | |
| mlog_exit(status); | |
| return status; | |
| } | |
| /* | |
| * will return: -EAGAIN if it is ok to keep searching for superblocks | |
| * -EINVAL if there is a bad superblock | |
| * 0 on success | |
| */ | |
| static int ocfs2_verify_volume(struct ocfs2_dinode *di, | |
| struct buffer_head *bh, | |
| u32 blksz) | |
| { | |
| int status = -EAGAIN; | |
| mlog_entry_void(); | |
| if (memcmp(di->i_signature, OCFS2_SUPER_BLOCK_SIGNATURE, | |
| strlen(OCFS2_SUPER_BLOCK_SIGNATURE)) == 0) { | |
| status = -EINVAL; | |
| if ((1 << le32_to_cpu(di->id2.i_super.s_blocksize_bits)) != blksz) { | |
| mlog(ML_ERROR, "found superblock with incorrect block " | |
| "size: found %u, should be %u\n", | |
| 1 << le32_to_cpu(di->id2.i_super.s_blocksize_bits), | |
| blksz); | |
| } else if (le16_to_cpu(di->id2.i_super.s_major_rev_level) != | |
| OCFS2_MAJOR_REV_LEVEL || | |
| le16_to_cpu(di->id2.i_super.s_minor_rev_level) != | |
| OCFS2_MINOR_REV_LEVEL) { | |
| mlog(ML_ERROR, "found superblock with bad version: " | |
| "found %u.%u, should be %u.%u\n", | |
| le16_to_cpu(di->id2.i_super.s_major_rev_level), | |
| le16_to_cpu(di->id2.i_super.s_minor_rev_level), | |
| OCFS2_MAJOR_REV_LEVEL, | |
| OCFS2_MINOR_REV_LEVEL); | |
| } else if (bh->b_blocknr != le64_to_cpu(di->i_blkno)) { | |
| mlog(ML_ERROR, "bad block number on superblock: " | |
| "found %llu, should be %llu\n", | |
| (unsigned long long)di->i_blkno, | |
| (unsigned long long)bh->b_blocknr); | |
| } else if (le32_to_cpu(di->id2.i_super.s_clustersize_bits) < 12 || | |
| le32_to_cpu(di->id2.i_super.s_clustersize_bits) > 20) { | |
| mlog(ML_ERROR, "bad cluster size found: %u\n", | |
| 1 << le32_to_cpu(di->id2.i_super.s_clustersize_bits)); | |
| } else if (!le64_to_cpu(di->id2.i_super.s_root_blkno)) { | |
| mlog(ML_ERROR, "bad root_blkno: 0\n"); | |
| } else if (!le64_to_cpu(di->id2.i_super.s_system_dir_blkno)) { | |
| mlog(ML_ERROR, "bad system_dir_blkno: 0\n"); | |
| } else if (le16_to_cpu(di->id2.i_super.s_max_slots) > OCFS2_MAX_SLOTS) { | |
| mlog(ML_ERROR, | |
| "Superblock slots found greater than file system " | |
| "maximum: found %u, max %u\n", | |
| le16_to_cpu(di->id2.i_super.s_max_slots), | |
| OCFS2_MAX_SLOTS); | |
| } else { | |
| /* found it! */ | |
| status = 0; | |
| } | |
| } | |
| mlog_exit(status); | |
| return status; | |
| } | |
| static int ocfs2_check_volume(struct ocfs2_super *osb) | |
| { | |
| int status = 0; | |
| int dirty; | |
| struct ocfs2_dinode *local_alloc = NULL; /* only used if we | |
| * recover | |
| * ourselves. */ | |
| mlog_entry_void(); | |
| /* Init our journal object. */ | |
| status = ocfs2_journal_init(osb->journal, &dirty); | |
| if (status < 0) { | |
| mlog(ML_ERROR, "Could not initialize journal!\n"); | |
| goto finally; | |
| } | |
| /* If the journal was unmounted cleanly then we don't want to | |
| * recover anything. Otherwise, journal_load will do that | |
| * dirty work for us :) */ | |
| if (!dirty) { | |
| status = ocfs2_journal_wipe(osb->journal, 0); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto finally; | |
| } | |
| } else { | |
| mlog(ML_NOTICE, "File system was not unmounted cleanly, " | |
| "recovering volume.\n"); | |
| } | |
| /* will play back anything left in the journal. */ | |
| ocfs2_journal_load(osb->journal); | |
| if (dirty) { | |
| /* recover my local alloc if we didn't unmount cleanly. */ | |
| status = ocfs2_begin_local_alloc_recovery(osb, | |
| osb->slot_num, | |
| &local_alloc); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto finally; | |
| } | |
| /* we complete the recovery process after we've marked | |
| * ourselves as mounted. */ | |
| } | |
| mlog(0, "Journal loaded.\n"); | |
| status = ocfs2_load_local_alloc(osb); | |
| if (status < 0) { | |
| mlog_errno(status); | |
| goto finally; | |
| } | |
| if (dirty) { | |
| /* Recovery will be completed after we've mounted the | |
| * rest of the volume. */ | |
| osb->dirty = 1; | |
| osb->local_alloc_copy = local_alloc; | |
| local_alloc = NULL; | |
| } | |
| /* go through each journal, trylock it and if you get the | |
| * lock, and it's marked as dirty, set the bit in the recover | |
| * map and launch a recovery thread for it. */ | |
| status = ocfs2_mark_dead_nodes(osb); | |
| if (status < 0) | |
| mlog_errno(status); | |
| finally: | |
| if (local_alloc) | |
| kfree(local_alloc); | |
| mlog_exit(status); | |
| return status; | |
| } | |
| /* | |
| * The routine gets called from dismount or close whenever a dismount on | |
| * volume is requested and the osb open count becomes 1. | |
| * It will remove the osb from the global list and also free up all the | |
| * initialized resources and fileobject. | |
| */ | |
| static void ocfs2_delete_osb(struct ocfs2_super *osb) | |
| { | |
| mlog_entry_void(); | |
| /* This function assumes that the caller has the main osb resource */ | |
| if (osb->slot_info) | |
| ocfs2_free_slot_info(osb->slot_info); | |
| kfree(osb->osb_orphan_wipes); | |
| /* FIXME | |
| * This belongs in journal shutdown, but because we have to | |
| * allocate osb->journal at the start of ocfs2_initalize_osb(), | |
| * we free it here. | |
| */ | |
| kfree(osb->journal); | |
| if (osb->local_alloc_copy) | |
| kfree(osb->local_alloc_copy); | |
| kfree(osb->uuid_str); | |
| ocfs2_put_dlm_debug(osb->osb_dlm_debug); | |
| memset(osb, 0, sizeof(struct ocfs2_super)); | |
| mlog_exit_void(); | |
| } | |
| /* Put OCFS2 into a readonly state, or (if the user specifies it), | |
| * panic(). We do not support continue-on-error operation. */ | |
| static void ocfs2_handle_error(struct super_block *sb) | |
| { | |
| struct ocfs2_super *osb = OCFS2_SB(sb); | |
| if (osb->s_mount_opt & OCFS2_MOUNT_ERRORS_PANIC) | |
| panic("OCFS2: (device %s): panic forced after error\n", | |
| sb->s_id); | |
| ocfs2_set_osb_flag(osb, OCFS2_OSB_ERROR_FS); | |
| if (sb->s_flags & MS_RDONLY && | |
| (ocfs2_is_soft_readonly(osb) || | |
| ocfs2_is_hard_readonly(osb))) | |
| return; | |
| printk(KERN_CRIT "File system is now read-only due to the potential " | |
| "of on-disk corruption. Please run fsck.ocfs2 once the file " | |
| "system is unmounted.\n"); | |
| sb->s_flags |= MS_RDONLY; | |
| ocfs2_set_ro_flag(osb, 0); | |
| } | |
| static char error_buf[1024]; | |
| void __ocfs2_error(struct super_block *sb, | |
| const char *function, | |
| const char *fmt, ...) | |
| { | |
| va_list args; | |
| va_start(args, fmt); | |
| vsprintf(error_buf, fmt, args); | |
| va_end(args); | |
| /* Not using mlog here because we want to show the actual | |
| * function the error came from. */ | |
| printk(KERN_CRIT "OCFS2: ERROR (device %s): %s: %s\n", | |
| sb->s_id, function, error_buf); | |
| ocfs2_handle_error(sb); | |
| } | |
| /* Handle critical errors. This is intentionally more drastic than | |
| * ocfs2_handle_error, so we only use for things like journal errors, | |
| * etc. */ | |
| void __ocfs2_abort(struct super_block* sb, | |
| const char *function, | |
| const char *fmt, ...) | |
| { | |
| va_list args; | |
| va_start(args, fmt); | |
| vsprintf(error_buf, fmt, args); | |
| va_end(args); | |
| printk(KERN_CRIT "OCFS2: abort (device %s): %s: %s\n", | |
| sb->s_id, function, error_buf); | |
| /* We don't have the cluster support yet to go straight to | |
| * hard readonly in here. Until then, we want to keep | |
| * ocfs2_abort() so that we can at least mark critical | |
| * errors. | |
| * | |
| * TODO: This should abort the journal and alert other nodes | |
| * that our slot needs recovery. */ | |
| /* Force a panic(). This stinks, but it's better than letting | |
| * things continue without having a proper hard readonly | |
| * here. */ | |
| OCFS2_SB(sb)->s_mount_opt |= OCFS2_MOUNT_ERRORS_PANIC; | |
| ocfs2_handle_error(sb); | |
| } | |
| module_init(ocfs2_init); | |
| module_exit(ocfs2_exit); |