| /****************************************************************************/ | |
| /* | |
| * linux/include/asm-arm/arch-l7200/pmu.h | |
| * | |
| * Registers and helper functions for the L7200 Link-Up Systems | |
| * Power Management Unit (PMU). | |
| * | |
| * (C) Copyright 2000, S A McConnell (samcconn@cotw.com) | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file COPYING in the main directory of this archive for | |
| * more details. | |
| */ | |
| /****************************************************************************/ | |
| #define PMU_OFF 0x00050000 /* Offset from IO_START to the PMU registers. */ | |
| /* IO_START and IO_BASE are defined in hardware.h */ | |
| #define PMU_START (IO_START + PMU_OFF) /* Physical addr. of the PMU reg. */ | |
| #define PMU_BASE (IO_BASE + PMU_OFF) /* Virtual addr. of the PMU reg. */ | |
| /* Define the PMU registers for use by device drivers and the kernel. */ | |
| typedef struct { | |
| unsigned int CURRENT; /* Current configuration register */ | |
| unsigned int NEXT; /* Next configuration register */ | |
| unsigned int reserved; | |
| unsigned int RUN; /* Run configuration register */ | |
| unsigned int COMM; /* Configuration command register */ | |
| unsigned int SDRAM; /* SDRAM configuration bypass register */ | |
| } pmu_interface; | |
| #define PMU ((volatile pmu_interface *)(PMU_BASE)) | |
| /* Macro's for reading the common register fields. */ | |
| #define GET_TRANSOP(reg) ((reg >> 25) & 0x03) /* Bits 26-25 */ | |
| #define GET_OSCEN(reg) ((reg >> 16) & 0x01) | |
| #define GET_OSCMUX(reg) ((reg >> 15) & 0x01) | |
| #define GET_PLLMUL(reg) ((reg >> 9) & 0x3f) /* Bits 14-9 */ | |
| #define GET_PLLEN(reg) ((reg >> 8) & 0x01) | |
| #define GET_PLLMUX(reg) ((reg >> 7) & 0x01) | |
| #define GET_BCLK_DIV(reg) ((reg >> 3) & 0x03) /* Bits 4-3 */ | |
| #define GET_SDRB_SEL(reg) ((reg >> 2) & 0x01) | |
| #define GET_SDRF_SEL(reg) ((reg >> 1) & 0x01) | |
| #define GET_FASTBUS(reg) (reg & 0x1) | |
| /* CFG_NEXT register */ | |
| #define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f) /* Bits 24-18 */ | |
| #define CFG_NEXT_INTRET ((PMU->NEXT >> 17) & 0x01) | |
| #define CFG_NEXT_SDR_STOP ((PMU->NEXT >> 6) & 0x01) | |
| #define CFG_NEXT_SYSCLKEN ((PMU->NEXT >> 5) & 0x01) | |
| /* Useful field values that can be used to construct the | |
| * CFG_NEXT and CFG_RUN registers. | |
| */ | |
| #define TRANSOP_NOP 0<<25 /* NOCHANGE_NOSTALL */ | |
| #define NOCHANGE_STALL 1<<25 | |
| #define CHANGE_NOSTALL 2<<25 | |
| #define CHANGE_STALL 3<<25 | |
| #define INTRET 1<<17 | |
| #define OSCEN 1<<16 | |
| #define OSCMUX 1<<15 | |
| /* PLL frequencies */ | |
| #define PLLMUL_0 0<<9 /* 3.6864 MHz */ | |
| #define PLLMUL_1 1<<9 /* ?????? MHz */ | |
| #define PLLMUL_5 5<<9 /* 18.432 MHz */ | |
| #define PLLMUL_10 10<<9 /* 36.864 MHz */ | |
| #define PLLMUL_18 18<<9 /* ?????? MHz */ | |
| #define PLLMUL_20 20<<9 /* 73.728 MHz */ | |
| #define PLLMUL_32 32<<9 /* ?????? MHz */ | |
| #define PLLMUL_35 35<<9 /* 129.024 MHz */ | |
| #define PLLMUL_36 36<<9 /* ?????? MHz */ | |
| #define PLLMUL_39 39<<9 /* ?????? MHz */ | |
| #define PLLMUL_40 40<<9 /* 147.456 MHz */ | |
| /* Clock recovery times */ | |
| #define CRCLOCK_1 1<<18 | |
| #define CRCLOCK_2 2<<18 | |
| #define CRCLOCK_4 4<<18 | |
| #define CRCLOCK_8 8<<18 | |
| #define CRCLOCK_16 16<<18 | |
| #define CRCLOCK_32 32<<18 | |
| #define CRCLOCK_63 63<<18 | |
| #define CRCLOCK_127 127<<18 | |
| #define PLLEN 1<<8 | |
| #define PLLMUX 1<<7 | |
| #define SDR_STOP 1<<6 | |
| #define SYSCLKEN 1<<5 | |
| #define BCLK_DIV_4 2<<3 | |
| #define BCLK_DIV_2 1<<3 | |
| #define BCLK_DIV_1 0<<3 | |
| #define SDRB_SEL 1<<2 | |
| #define SDRF_SEL 1<<1 | |
| #define FASTBUS 1<<0 | |
| /* CFG_SDRAM */ | |
| #define SDRREFFQ 1<<0 /* Only if SDRSTOPRQ is not set. */ | |
| #define SDRREFACK 1<<1 /* Read-only */ | |
| #define SDRSTOPRQ 1<<2 /* Only if SDRREFFQ is not set. */ | |
| #define SDRSTOPACK 1<<3 /* Read-only */ | |
| #define PICEN 1<<4 /* Enable Co-procesor */ | |
| #define PICTEST 1<<5 | |
| #define GET_SDRREFFQ ((PMU->SDRAM >> 0) & 0x01) | |
| #define GET_SDRREFACK ((PMU->SDRAM >> 1) & 0x01) /* Read-only */ | |
| #define GET_SDRSTOPRQ ((PMU->SDRAM >> 2) & 0x01) | |
| #define GET_SDRSTOPACK ((PMU->SDRAM >> 3) & 0x01) /* Read-only */ | |
| #define GET_PICEN ((PMU->SDRAM >> 4) & 0x01) | |
| #define GET_PICTEST ((PMU->SDRAM >> 5) & 0x01) |