| /* | |
| * linux/include/asm-arm/arch-omap/mux.h | |
| * | |
| * Table of the Omap register configurations for the FUNC_MUX and | |
| * PULL_DWN combinations. | |
| * | |
| * Copyright (C) 2003 - 2005 Nokia Corporation | |
| * | |
| * Written by Tony Lindgren <tony.lindgren@nokia.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| * | |
| * NOTE: Please use the following naming style for new pin entries. | |
| * For example, W8_1610_MMC2_DAT0, where: | |
| * - W8 = ball | |
| * - 1610 = 1510 or 1610, none if common for both 1510 and 1610 | |
| * - MMC2_DAT0 = function | |
| * | |
| * Change log: | |
| * Added entry for the I2C interface. (02Feb 2004) | |
| * Copyright (C) 2004 Texas Instruments | |
| * | |
| * Added entry for the keypad and uwire CS1. (09Mar 2004) | |
| * Copyright (C) 2004 Texas Instruments | |
| * | |
| */ | |
| #ifndef __ASM_ARCH_MUX_H | |
| #define __ASM_ARCH_MUX_H | |
| #define PU_PD_SEL_NA 0 /* No pu_pd reg available */ | |
| #define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */ | |
| #ifdef CONFIG_OMAP_MUX_DEBUG | |
| #define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \ | |
| .mux_reg = FUNC_MUX_CTRL_##reg, \ | |
| .mask_offset = mode_offset, \ | |
| .mask = mode, | |
| #define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \ | |
| .pull_reg = PULL_DWN_CTRL_##reg, \ | |
| .pull_bit = bit, \ | |
| .pull_val = status, | |
| #define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \ | |
| .pu_pd_reg = PU_PD_SEL_##reg, \ | |
| .pu_pd_val = status, | |
| #define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \ | |
| .mux_reg = OMAP730_IO_CONF_##reg, \ | |
| .mask_offset = mode_offset, \ | |
| .mask = mode, | |
| #define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \ | |
| .pull_reg = OMAP730_IO_CONF_##reg, \ | |
| .pull_bit = bit, \ | |
| .pull_val = status, | |
| #else | |
| #define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ | |
| .mask_offset = mode_offset, \ | |
| .mask = mode, | |
| #define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \ | |
| .pull_bit = bit, \ | |
| .pull_val = status, | |
| #define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ | |
| .pu_pd_val = status, | |
| #define MUX_REG_730(reg, mode_offset, mode) \ | |
| .mux_reg = OMAP730_IO_CONF_##reg, \ | |
| .mask_offset = mode_offset, \ | |
| .mask = mode, | |
| #define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \ | |
| .pull_bit = bit, \ | |
| .pull_val = status, | |
| #endif /* CONFIG_OMAP_MUX_DEBUG */ | |
| #define MUX_CFG(desc, mux_reg, mode_offset, mode, \ | |
| pull_reg, pull_bit, pull_status, \ | |
| pu_pd_reg, pu_pd_status, debug_status) \ | |
| { \ | |
| .name = desc, \ | |
| .debug = debug_status, \ | |
| MUX_REG(mux_reg, mode_offset, mode) \ | |
| PULL_REG(pull_reg, pull_bit, pull_status) \ | |
| PU_PD_REG(pu_pd_reg, pu_pd_status) \ | |
| }, | |
| /* | |
| * OMAP730 has a slightly different config for the pin mux. | |
| * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and | |
| * not the FUNC_MUX_CTRL_x regs from hardware.h | |
| * - for pull-up/down, only has one enable bit which is is in the same register | |
| * as mux config | |
| */ | |
| #define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \ | |
| pull_bit, pull_status, debug_status)\ | |
| { \ | |
| .name = desc, \ | |
| .debug = debug_status, \ | |
| MUX_REG_730(mux_reg, mode_offset, mode) \ | |
| PULL_REG_730(mux_reg, pull_bit, pull_status) \ | |
| PU_PD_REG(NA, 0) \ | |
| }, | |
| #define MUX_CFG_24XX(desc, reg_offset, mode, \ | |
| pull_en, pull_mode, dbg) \ | |
| { \ | |
| .name = desc, \ | |
| .debug = dbg, \ | |
| .mux_reg = reg_offset, \ | |
| .mask = mode, \ | |
| .pull_val = pull_en, \ | |
| .pu_pd_val = pull_mode, \ | |
| }, | |
| #define PULL_DISABLED 0 | |
| #define PULL_ENABLED 1 | |
| #define PULL_DOWN 0 | |
| #define PULL_UP 1 | |
| struct pin_config { | |
| char *name; | |
| unsigned char busy; | |
| unsigned char debug; | |
| const char *mux_reg_name; | |
| const unsigned int mux_reg; | |
| const unsigned char mask_offset; | |
| const unsigned char mask; | |
| const char *pull_name; | |
| const unsigned int pull_reg; | |
| const unsigned char pull_val; | |
| const unsigned char pull_bit; | |
| const char *pu_pd_name; | |
| const unsigned int pu_pd_reg; | |
| const unsigned char pu_pd_val; | |
| }; | |
| enum omap730_index { | |
| /* OMAP 730 keyboard */ | |
| E2_730_KBR0, | |
| J7_730_KBR1, | |
| E1_730_KBR2, | |
| F3_730_KBR3, | |
| D2_730_KBR4, | |
| C2_730_KBC0, | |
| D3_730_KBC1, | |
| E4_730_KBC2, | |
| F4_730_KBC3, | |
| E3_730_KBC4, | |
| /* USB */ | |
| AA17_730_USB_DM, | |
| W16_730_USB_PU_EN, | |
| W17_730_USB_VBUSI, | |
| }; | |
| enum omap1xxx_index { | |
| /* UART1 (BT_UART_GATING)*/ | |
| UART1_TX = 0, | |
| UART1_RTS, | |
| /* UART2 (COM_UART_GATING)*/ | |
| UART2_TX, | |
| UART2_RX, | |
| UART2_CTS, | |
| UART2_RTS, | |
| /* UART3 (GIGA_UART_GATING) */ | |
| UART3_TX, | |
| UART3_RX, | |
| UART3_CTS, | |
| UART3_RTS, | |
| UART3_CLKREQ, | |
| UART3_BCLK, /* 12MHz clock out */ | |
| Y15_1610_UART3_RTS, | |
| /* PWT & PWL */ | |
| PWT, | |
| PWL, | |
| /* USB master generic */ | |
| R18_USB_VBUS, | |
| R18_1510_USB_GPIO0, | |
| W4_USB_PUEN, | |
| W4_USB_CLKO, | |
| W4_USB_HIGHZ, | |
| W4_GPIO58, | |
| /* USB1 master */ | |
| USB1_SUSP, | |
| USB1_SEO, | |
| W13_1610_USB1_SE0, | |
| USB1_TXEN, | |
| USB1_TXD, | |
| USB1_VP, | |
| USB1_VM, | |
| USB1_RCV, | |
| USB1_SPEED, | |
| R13_1610_USB1_SPEED, | |
| R13_1710_USB1_SE0, | |
| /* USB2 master */ | |
| USB2_SUSP, | |
| USB2_VP, | |
| USB2_TXEN, | |
| USB2_VM, | |
| USB2_RCV, | |
| USB2_SEO, | |
| USB2_TXD, | |
| /* OMAP-1510 GPIO */ | |
| R18_1510_GPIO0, | |
| R19_1510_GPIO1, | |
| M14_1510_GPIO2, | |
| /* OMAP1610 GPIO */ | |
| P18_1610_GPIO3, | |
| Y15_1610_GPIO17, | |
| /* OMAP-1710 GPIO */ | |
| R18_1710_GPIO0, | |
| V2_1710_GPIO10, | |
| N21_1710_GPIO14, | |
| W15_1710_GPIO40, | |
| /* MPUIO */ | |
| MPUIO2, | |
| N15_1610_MPUIO2, | |
| MPUIO4, | |
| MPUIO5, | |
| T20_1610_MPUIO5, | |
| W11_1610_MPUIO6, | |
| V10_1610_MPUIO7, | |
| W11_1610_MPUIO9, | |
| V10_1610_MPUIO10, | |
| W10_1610_MPUIO11, | |
| E20_1610_MPUIO13, | |
| U20_1610_MPUIO14, | |
| E19_1610_MPUIO15, | |
| /* MCBSP2 */ | |
| MCBSP2_CLKR, | |
| MCBSP2_CLKX, | |
| MCBSP2_DR, | |
| MCBSP2_DX, | |
| MCBSP2_FSR, | |
| MCBSP2_FSX, | |
| /* MCBSP3 */ | |
| MCBSP3_CLKX, | |
| /* Misc ballouts */ | |
| BALLOUT_V8_ARMIO3, | |
| N20_HDQ, | |
| /* OMAP-1610 MMC2 */ | |
| W8_1610_MMC2_DAT0, | |
| V8_1610_MMC2_DAT1, | |
| W15_1610_MMC2_DAT2, | |
| R10_1610_MMC2_DAT3, | |
| Y10_1610_MMC2_CLK, | |
| Y8_1610_MMC2_CMD, | |
| V9_1610_MMC2_CMDDIR, | |
| V5_1610_MMC2_DATDIR0, | |
| W19_1610_MMC2_DATDIR1, | |
| R18_1610_MMC2_CLKIN, | |
| /* OMAP-1610 External Trace Interface */ | |
| M19_1610_ETM_PSTAT0, | |
| L15_1610_ETM_PSTAT1, | |
| L18_1610_ETM_PSTAT2, | |
| L19_1610_ETM_D0, | |
| J19_1610_ETM_D6, | |
| J18_1610_ETM_D7, | |
| /* OMAP16XX GPIO */ | |
| P20_1610_GPIO4, | |
| V9_1610_GPIO7, | |
| W8_1610_GPIO9, | |
| N20_1610_GPIO11, | |
| N19_1610_GPIO13, | |
| P10_1610_GPIO22, | |
| V5_1610_GPIO24, | |
| AA20_1610_GPIO_41, | |
| W19_1610_GPIO48, | |
| M7_1610_GPIO62, | |
| V14_16XX_GPIO37, | |
| R9_16XX_GPIO18, | |
| L14_16XX_GPIO49, | |
| /* OMAP-1610 uWire */ | |
| V19_1610_UWIRE_SCLK, | |
| U18_1610_UWIRE_SDI, | |
| W21_1610_UWIRE_SDO, | |
| N14_1610_UWIRE_CS0, | |
| P15_1610_UWIRE_CS3, | |
| N15_1610_UWIRE_CS1, | |
| /* OMAP-1610 SPI */ | |
| U19_1610_SPIF_SCK, | |
| U18_1610_SPIF_DIN, | |
| P20_1610_SPIF_DIN, | |
| W21_1610_SPIF_DOUT, | |
| R18_1610_SPIF_DOUT, | |
| N14_1610_SPIF_CS0, | |
| N15_1610_SPIF_CS1, | |
| T19_1610_SPIF_CS2, | |
| P15_1610_SPIF_CS3, | |
| /* OMAP-1610 Flash */ | |
| L3_1610_FLASH_CS2B_OE, | |
| M8_1610_FLASH_CS2B_WE, | |
| /* First MMC */ | |
| MMC_CMD, | |
| MMC_DAT1, | |
| MMC_DAT2, | |
| MMC_DAT0, | |
| MMC_CLK, | |
| MMC_DAT3, | |
| /* OMAP-1710 MMC CMDDIR and DATDIR0 */ | |
| M15_1710_MMC_CLKI, | |
| P19_1710_MMC_CMDDIR, | |
| P20_1710_MMC_DATDIR0, | |
| /* OMAP-1610 USB0 alternate pin configuration */ | |
| W9_USB0_TXEN, | |
| AA9_USB0_VP, | |
| Y5_USB0_RCV, | |
| R9_USB0_VM, | |
| V6_USB0_TXD, | |
| W5_USB0_SE0, | |
| V9_USB0_SPEED, | |
| V9_USB0_SUSP, | |
| /* USB2 */ | |
| W9_USB2_TXEN, | |
| AA9_USB2_VP, | |
| Y5_USB2_RCV, | |
| R9_USB2_VM, | |
| V6_USB2_TXD, | |
| W5_USB2_SE0, | |
| /* 16XX UART */ | |
| R13_1610_UART1_TX, | |
| V14_16XX_UART1_RX, | |
| R14_1610_UART1_CTS, | |
| AA15_1610_UART1_RTS, | |
| R9_16XX_UART2_RX, | |
| L14_16XX_UART3_RX, | |
| /* I2C OMAP-1610 */ | |
| I2C_SCL, | |
| I2C_SDA, | |
| /* Keypad */ | |
| F18_1610_KBC0, | |
| D20_1610_KBC1, | |
| D19_1610_KBC2, | |
| E18_1610_KBC3, | |
| C21_1610_KBC4, | |
| G18_1610_KBR0, | |
| F19_1610_KBR1, | |
| H14_1610_KBR2, | |
| E20_1610_KBR3, | |
| E19_1610_KBR4, | |
| N19_1610_KBR5, | |
| /* Power management */ | |
| T20_1610_LOW_PWR, | |
| /* MCLK Settings */ | |
| V5_1710_MCLK_ON, | |
| V5_1710_MCLK_OFF, | |
| R10_1610_MCLK_ON, | |
| R10_1610_MCLK_OFF, | |
| /* CompactFlash controller */ | |
| P11_1610_CF_CD2, | |
| R11_1610_CF_IOIS16, | |
| V10_1610_CF_IREQ, | |
| W10_1610_CF_RESET, | |
| W11_1610_CF_CD1, | |
| }; | |
| enum omap24xx_index { | |
| /* 24xx I2C */ | |
| M19_24XX_I2C1_SCL, | |
| L15_24XX_I2C1_SDA, | |
| J15_24XX_I2C2_SCL, | |
| H19_24XX_I2C2_SDA, | |
| /* 24xx Menelaus interrupt */ | |
| W19_24XX_SYS_NIRQ, | |
| /* 24xx clock */ | |
| W14_24XX_SYS_CLKOUT, | |
| /* 24xx GPMC wait pin monitoring */ | |
| L3_GPMC_WAIT0, | |
| N7_GPMC_WAIT1, | |
| M1_GPMC_WAIT2, | |
| P1_GPMC_WAIT3, | |
| /* 242X McBSP */ | |
| Y15_24XX_MCBSP2_CLKX, | |
| R14_24XX_MCBSP2_FSX, | |
| W15_24XX_MCBSP2_DR, | |
| V15_24XX_MCBSP2_DX, | |
| /* 24xx GPIO */ | |
| M21_242X_GPIO11, | |
| AA10_242X_GPIO13, | |
| AA6_242X_GPIO14, | |
| AA4_242X_GPIO15, | |
| Y11_242X_GPIO16, | |
| AA12_242X_GPIO17, | |
| AA8_242X_GPIO58, | |
| Y20_24XX_GPIO60, | |
| W4__24XX_GPIO74, | |
| M15_24XX_GPIO92, | |
| V14_24XX_GPIO117, | |
| /* 242x DBG GPIO */ | |
| V4_242X_GPIO49, | |
| W2_242X_GPIO50, | |
| U4_242X_GPIO51, | |
| V3_242X_GPIO52, | |
| V2_242X_GPIO53, | |
| V6_242X_GPIO53, | |
| T4_242X_GPIO54, | |
| Y4_242X_GPIO54, | |
| T3_242X_GPIO55, | |
| U2_242X_GPIO56, | |
| /* 24xx external DMA requests */ | |
| AA10_242X_DMAREQ0, | |
| AA6_242X_DMAREQ1, | |
| E4_242X_DMAREQ2, | |
| G4_242X_DMAREQ3, | |
| D3_242X_DMAREQ4, | |
| E3_242X_DMAREQ5, | |
| P20_24XX_TSC_IRQ, | |
| /* UART3 */ | |
| K15_24XX_UART3_TX, | |
| K14_24XX_UART3_RX, | |
| /* MMC/SDIO */ | |
| G19_24XX_MMC_CLKO, | |
| H18_24XX_MMC_CMD, | |
| F20_24XX_MMC_DAT0, | |
| H14_24XX_MMC_DAT1, | |
| E19_24XX_MMC_DAT2, | |
| D19_24XX_MMC_DAT3, | |
| F19_24XX_MMC_DAT_DIR0, | |
| E20_24XX_MMC_DAT_DIR1, | |
| F18_24XX_MMC_DAT_DIR2, | |
| E18_24XX_MMC_DAT_DIR3, | |
| G18_24XX_MMC_CMD_DIR, | |
| H15_24XX_MMC_CLKI, | |
| /* Keypad GPIO*/ | |
| T19_24XX_KBR0, | |
| R19_24XX_KBR1, | |
| V18_24XX_KBR2, | |
| M21_24XX_KBR3, | |
| E5__24XX_KBR4, | |
| M18_24XX_KBR5, | |
| R20_24XX_KBC0, | |
| M14_24XX_KBC1, | |
| H19_24XX_KBC2, | |
| V17_24XX_KBC3, | |
| P21_24XX_KBC4, | |
| L14_24XX_KBC5, | |
| N19_24XX_KBC6, | |
| /* 24xx Menelaus Keypad GPIO */ | |
| B3__24XX_KBR5, | |
| AA4_24XX_KBC2, | |
| B13_24XX_KBC6, | |
| }; | |
| #ifdef CONFIG_OMAP_MUX | |
| /* setup pin muxing in Linux */ | |
| extern int omap1_mux_init(void); | |
| extern int omap2_mux_init(void); | |
| extern int omap_mux_register(struct pin_config * pins, unsigned long size); | |
| extern int omap_cfg_reg(unsigned long reg_cfg); | |
| #else | |
| /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ | |
| static inline int omap1_mux_init(void) { return 0; } | |
| static inline int omap2_mux_init(void) { return 0; } | |
| static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } | |
| #endif | |
| #endif |