| /* linux/include/asm-arm/arch-s3c2410/hardware.h | |
| * | |
| * (c) 2003 Simtec Electronics | |
| * Ben Dooks <ben@simtec.co.uk> | |
| * | |
| * S3C2410 - hardware | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #ifndef __ASM_ARCH_HARDWARE_H | |
| #define __ASM_ARCH_HARDWARE_H | |
| #ifndef __ASSEMBLY__ | |
| /* external functions for GPIO support | |
| * | |
| * These allow various different clients to access the same GPIO | |
| * registers without conflicting. If your driver only owns the entire | |
| * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. | |
| */ | |
| /* s3c2410_gpio_cfgpin | |
| * | |
| * set the configuration of the given pin to the value passed. | |
| * | |
| * eg: | |
| * s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0); | |
| * s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1); | |
| */ | |
| extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function); | |
| extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); | |
| /* s3c2410_gpio_getirq | |
| * | |
| * turn the given pin number into the corresponding IRQ number | |
| * | |
| * returns: | |
| * < 0 = no interrupt for this pin | |
| * >=0 = interrupt number for the pin | |
| */ | |
| extern int s3c2410_gpio_getirq(unsigned int pin); | |
| #ifdef CONFIG_CPU_S3C2400 | |
| extern int s3c2400_gpio_getirq(unsigned int pin); | |
| #endif /* CONFIG_CPU_S3C2400 */ | |
| /* s3c2410_gpio_irqfilter | |
| * | |
| * set the irq filtering on the given pin | |
| * | |
| * on = 0 => disable filtering | |
| * 1 => enable filtering | |
| * | |
| * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with | |
| * width of filter (0 through 63) | |
| * | |
| * | |
| */ | |
| extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, | |
| unsigned int config); | |
| /* s3c2410_gpio_pullup | |
| * | |
| * configure the pull-up control on the given pin | |
| * | |
| * to = 1 => disable the pull-up | |
| * 0 => enable the pull-up | |
| * | |
| * eg; | |
| * | |
| * s3c2410_gpio_pullup(S3C2410_GPB0, 0); | |
| * s3c2410_gpio_pullup(S3C2410_GPE8, 0); | |
| */ | |
| extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); | |
| extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); | |
| extern unsigned int s3c2410_gpio_getpin(unsigned int pin); | |
| extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg); | |
| #ifdef CONFIG_CPU_S3C2440 | |
| extern int s3c2440_set_dsc(unsigned int pin, unsigned int value); | |
| #endif /* CONFIG_CPU_S3C2440 */ | |
| #endif /* __ASSEMBLY__ */ | |
| #include <asm/sizes.h> | |
| #include <asm/arch/map.h> | |
| /* machine specific hardware definitions should go after this */ | |
| /* currently here until moved into config (todo) */ | |
| #define CONFIG_NO_MULTIWORD_IO | |
| #endif /* __ASM_ARCH_HARDWARE_H */ |