| /* | |
| * linux/include/asm-arm/arch-sa1100/dma.h | |
| * | |
| * Generic SA1100 DMA support | |
| * | |
| * Copyright (C) 2000 Nicolas Pitre | |
| * | |
| */ | |
| #ifndef __ASM_ARCH_DMA_H | |
| #define __ASM_ARCH_DMA_H | |
| #include "hardware.h" | |
| /* | |
| * The SA1100 has six internal DMA channels. | |
| */ | |
| #define SA1100_DMA_CHANNELS 6 | |
| /* | |
| * Maximum physical DMA buffer size | |
| */ | |
| #define MAX_DMA_SIZE 0x1fff | |
| #define CUT_DMA_SIZE 0x1000 | |
| /* | |
| * All possible SA1100 devices a DMA channel can be attached to. | |
| */ | |
| typedef enum { | |
| DMA_Ser0UDCWr = DDAR_Ser0UDCWr, /* Ser. port 0 UDC Write */ | |
| DMA_Ser0UDCRd = DDAR_Ser0UDCRd, /* Ser. port 0 UDC Read */ | |
| DMA_Ser1UARTWr = DDAR_Ser1UARTWr, /* Ser. port 1 UART Write */ | |
| DMA_Ser1UARTRd = DDAR_Ser1UARTRd, /* Ser. port 1 UART Read */ | |
| DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr, /* Ser. port 1 SDLC Write */ | |
| DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd, /* Ser. port 1 SDLC Read */ | |
| DMA_Ser2UARTWr = DDAR_Ser2UARTWr, /* Ser. port 2 UART Write */ | |
| DMA_Ser2UARTRd = DDAR_Ser2UARTRd, /* Ser. port 2 UART Read */ | |
| DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr, /* Ser. port 2 HSSP Write */ | |
| DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd, /* Ser. port 2 HSSP Read */ | |
| DMA_Ser3UARTWr = DDAR_Ser3UARTWr, /* Ser. port 3 UART Write */ | |
| DMA_Ser3UARTRd = DDAR_Ser3UARTRd, /* Ser. port 3 UART Read */ | |
| DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr, /* Ser. port 4 MCP 0 Write (audio) */ | |
| DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd, /* Ser. port 4 MCP 0 Read (audio) */ | |
| DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr, /* Ser. port 4 MCP 1 Write */ | |
| DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd, /* Ser. port 4 MCP 1 Read */ | |
| DMA_Ser4SSPWr = DDAR_Ser4SSPWr, /* Ser. port 4 SSP Write (16 bits) */ | |
| DMA_Ser4SSPRd = DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ | |
| } dma_device_t; | |
| typedef struct { | |
| volatile u_long DDAR; | |
| volatile u_long SetDCSR; | |
| volatile u_long ClrDCSR; | |
| volatile u_long RdDCSR; | |
| volatile dma_addr_t DBSA; | |
| volatile u_long DBTA; | |
| volatile dma_addr_t DBSB; | |
| volatile u_long DBTB; | |
| } dma_regs_t; | |
| typedef void (*dma_callback_t)(void *data); | |
| /* | |
| * DMA function prototypes | |
| */ | |
| extern int sa1100_request_dma( dma_device_t device, const char *device_id, | |
| dma_callback_t callback, void *data, | |
| dma_regs_t **regs ); | |
| extern void sa1100_free_dma( dma_regs_t *regs ); | |
| extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size ); | |
| extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs); | |
| extern void sa1100_reset_dma(dma_regs_t *regs); | |
| /** | |
| * sa1100_stop_dma - stop DMA in progress | |
| * @regs: identifier for the channel to use | |
| * | |
| * This stops DMA without clearing buffer pointers. Unlike | |
| * sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma() | |
| * or sa1100_get_dma_pos(). | |
| * | |
| * The @regs identifier is provided by a successful call to | |
| * sa1100_request_dma(). | |
| **/ | |
| #define sa1100_stop_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN) | |
| /** | |
| * sa1100_resume_dma - resume DMA on a stopped channel | |
| * @regs: identifier for the channel to use | |
| * | |
| * This resumes DMA on a channel previously stopped with | |
| * sa1100_stop_dma(). | |
| * | |
| * The @regs identifier is provided by a successful call to | |
| * sa1100_request_dma(). | |
| **/ | |
| #define sa1100_resume_dma(regs) ((regs)->SetDCSR = DCSR_IE|DCSR_RUN) | |
| /** | |
| * sa1100_clear_dma - clear DMA pointers | |
| * @regs: identifier for the channel to use | |
| * | |
| * This clear any DMA state so the DMA engine is ready to restart | |
| * with new buffers through sa1100_start_dma(). Any buffers in flight | |
| * are discarded. | |
| * | |
| * The @regs identifier is provided by a successful call to | |
| * sa1100_request_dma(). | |
| **/ | |
| #define sa1100_clear_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB) | |
| #endif /* _ASM_ARCH_DMA_H */ |