| #ifndef _ASM_ARCH_IRQ_H | |
| #define _ASM_ARCH_IRQ_H | |
| #include "hwregs/intr_vect.h" | |
| /* Number of non-cpu interrupts. */ | |
| #define NR_IRQS 0x50 /* Exceptions + IRQs */ | |
| #define NR_REAL_IRQS 0x20 /* IRQs */ | |
| #define FIRST_IRQ 0x31 /* Exception number for first IRQ */ | |
| #ifndef __ASSEMBLY__ | |
| /* Global IRQ vector. */ | |
| typedef void (*irqvectptr)(void); | |
| struct etrax_interrupt_vector { | |
| irqvectptr v[256]; | |
| }; | |
| extern struct etrax_interrupt_vector *etrax_irv; /* head.S */ | |
| void mask_irq(int irq); | |
| void unmask_irq(int irq); | |
| void set_exception_vector(int n, irqvectptr addr); | |
| /* Save registers so that they match pt_regs. */ | |
| #define SAVE_ALL \ | |
| "subq 12,$sp\n\t" \ | |
| "move $erp,[$sp]\n\t" \ | |
| "subq 4,$sp\n\t" \ | |
| "move $srp,[$sp]\n\t" \ | |
| "subq 4,$sp\n\t" \ | |
| "move $ccs,[$sp]\n\t" \ | |
| "subq 4,$sp\n\t" \ | |
| "move $spc,[$sp]\n\t" \ | |
| "subq 4,$sp\n\t" \ | |
| "move $mof,[$sp]\n\t" \ | |
| "subq 4,$sp\n\t" \ | |
| "move $srs,[$sp]\n\t" \ | |
| "subq 4,$sp\n\t" \ | |
| "move.d $acr,[$sp]\n\t" \ | |
| "subq 14*4,$sp\n\t" \ | |
| "movem $r13,[$sp]\n\t" \ | |
| "subq 4,$sp\n\t" \ | |
| "move.d $r10,[$sp]\n" | |
| #define STR2(x) #x | |
| #define STR(x) STR2(x) | |
| #define IRQ_NAME2(nr) nr##_interrupt(void) | |
| #define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) | |
| /* | |
| * The reason for setting the S-bit when debugging the kernel is that we want | |
| * hardware breakpoints to remain active while we are in an exception handler. | |
| * Note that we cannot simply copy S1, since we may come here from user-space, | |
| * or any context where the S-bit wasn't set. | |
| */ | |
| #ifdef CONFIG_ETRAX_KGDB | |
| #define KGDB_FIXUP \ | |
| "move $ccs, $r10\n\t" \ | |
| "or.d (1<<9), $r10\n\t" \ | |
| "move $r10, $ccs\n\t" | |
| #else | |
| #define KGDB_FIXUP "" | |
| #endif | |
| /* | |
| * Make sure the causing IRQ is blocked, then call do_IRQ. After that, unblock | |
| * and jump to ret_from_intr which is found in entry.S. | |
| * | |
| * The reason for blocking the IRQ is to allow an sti() before the handler, | |
| * which will acknowledge the interrupt, is run. The actual blocking is made | |
| * by crisv32_do_IRQ. | |
| */ | |
| #define BUILD_IRQ(nr, mask) \ | |
| void IRQ_NAME(nr); \ | |
| __asm__ ( \ | |
| ".text\n\t" \ | |
| "IRQ" #nr "_interrupt:\n\t" \ | |
| SAVE_ALL \ | |
| KGDB_FIXUP \ | |
| "move.d "#nr",$r10\n\t" \ | |
| "move.d $sp,$r12\n\t" \ | |
| "jsr crisv32_do_IRQ\n\t" \ | |
| "moveq 1, $r11\n\t" \ | |
| "jump ret_from_intr\n\t" \ | |
| "nop\n\t"); | |
| /* | |
| * This is subtle. The timer interrupt is crucial and it should not be disabled | |
| * for too long. However, if it had been a normal interrupt as per BUILD_IRQ, it | |
| * would have been BLOCK'ed, and then softirq's are run before we return here to | |
| * UNBLOCK. If the softirq's take too much time to run, the timer irq won't run | |
| * and the watchdog will kill us. | |
| * | |
| * Furthermore, if a lot of other irq's occur before we return here, the | |
| * multiple_irq handler is run and it prioritizes the timer interrupt. However | |
| * if we had BLOCK'edit here, we would not get the multiple_irq at all. | |
| * | |
| * The non-blocking here is based on the knowledge that the timer interrupt is | |
| * registred as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not | |
| * be an sti() before the timer irq handler is run to acknowledge the interrupt. | |
| */ | |
| #define BUILD_TIMER_IRQ(nr, mask) \ | |
| void IRQ_NAME(nr); \ | |
| __asm__ ( \ | |
| ".text\n\t" \ | |
| "IRQ" #nr "_interrupt:\n\t" \ | |
| SAVE_ALL \ | |
| KGDB_FIXUP \ | |
| "move.d "#nr",$r10\n\t" \ | |
| "move.d $sp,$r12\n\t" \ | |
| "jsr crisv32_do_IRQ\n\t" \ | |
| "moveq 0,$r11\n\t" \ | |
| "jump ret_from_intr\n\t" \ | |
| "nop\n\t"); | |
| #endif /* __ASSEMBLY__ */ | |
| #endif /* _ASM_ARCH_IRQ_H */ |