| #ifndef _I386_HPET_H | |
| #define _I386_HPET_H | |
| #ifdef CONFIG_HPET_TIMER | |
| #include <linux/errno.h> | |
| #include <linux/module.h> | |
| #include <linux/sched.h> | |
| #include <linux/kernel.h> | |
| #include <linux/param.h> | |
| #include <linux/string.h> | |
| #include <linux/mm.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/time.h> | |
| #include <linux/delay.h> | |
| #include <linux/init.h> | |
| #include <linux/smp.h> | |
| #include <asm/io.h> | |
| #include <asm/smp.h> | |
| #include <asm/irq.h> | |
| #include <asm/msr.h> | |
| #include <asm/delay.h> | |
| #include <asm/mpspec.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/processor.h> | |
| #include <linux/timex.h> | |
| #include <asm/fixmap.h> | |
| /* | |
| * Documentation on HPET can be found at: | |
| * http://www.intel.com/ial/home/sp/pcmmspec.htm | |
| * ftp://download.intel.com/ial/home/sp/mmts098.pdf | |
| */ | |
| #define HPET_MMAP_SIZE 1024 | |
| #define HPET_ID 0x000 | |
| #define HPET_PERIOD 0x004 | |
| #define HPET_CFG 0x010 | |
| #define HPET_STATUS 0x020 | |
| #define HPET_COUNTER 0x0f0 | |
| #define HPET_T0_CFG 0x100 | |
| #define HPET_T0_CMP 0x108 | |
| #define HPET_T0_ROUTE 0x110 | |
| #define HPET_T1_CFG 0x120 | |
| #define HPET_T1_CMP 0x128 | |
| #define HPET_T1_ROUTE 0x130 | |
| #define HPET_T2_CFG 0x140 | |
| #define HPET_T2_CMP 0x148 | |
| #define HPET_T2_ROUTE 0x150 | |
| #define HPET_ID_LEGSUP 0x00008000 | |
| #define HPET_ID_NUMBER 0x00001f00 | |
| #define HPET_ID_REV 0x000000ff | |
| #define HPET_ID_NUMBER_SHIFT 8 | |
| #define HPET_CFG_ENABLE 0x001 | |
| #define HPET_CFG_LEGACY 0x002 | |
| #define HPET_LEGACY_8254 2 | |
| #define HPET_LEGACY_RTC 8 | |
| #define HPET_TN_ENABLE 0x004 | |
| #define HPET_TN_PERIODIC 0x008 | |
| #define HPET_TN_PERIODIC_CAP 0x010 | |
| #define HPET_TN_SETVAL 0x040 | |
| #define HPET_TN_32BIT 0x100 | |
| /* Use our own asm for 64 bit multiply/divide */ | |
| #define ASM_MUL64_REG(eax_out,edx_out,reg_in,eax_in) \ | |
| __asm__ __volatile__("mull %2" \ | |
| :"=a" (eax_out), "=d" (edx_out) \ | |
| :"r" (reg_in), "0" (eax_in)) | |
| #define ASM_DIV64_REG(eax_out,edx_out,reg_in,eax_in,edx_in) \ | |
| __asm__ __volatile__("divl %2" \ | |
| :"=a" (eax_out), "=d" (edx_out) \ | |
| :"r" (reg_in), "0" (eax_in), "1" (edx_in)) | |
| #define KERNEL_TICK_USEC (1000000UL/HZ) /* tick value in microsec */ | |
| /* Max HPET Period is 10^8 femto sec as in HPET spec */ | |
| #define HPET_MAX_PERIOD (100000000UL) | |
| /* | |
| * Min HPET period is 10^5 femto sec just for safety. If it is less than this, | |
| * then 32 bit HPET counter wrapsaround in less than 0.5 sec. | |
| */ | |
| #define HPET_MIN_PERIOD (100000UL) | |
| #define HPET_TICK_RATE (HZ * 100000UL) | |
| extern unsigned long hpet_tick; /* hpet clks count per tick */ | |
| extern unsigned long hpet_address; /* hpet memory map physical address */ | |
| extern int hpet_use_timer; | |
| extern int hpet_rtc_timer_init(void); | |
| extern int hpet_enable(void); | |
| extern int hpet_reenable(void); | |
| extern int is_hpet_enabled(void); | |
| extern int is_hpet_capable(void); | |
| extern int hpet_readl(unsigned long a); | |
| #ifdef CONFIG_HPET_EMULATE_RTC | |
| extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask); | |
| extern int hpet_set_rtc_irq_bit(unsigned long bit_mask); | |
| extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec); | |
| extern int hpet_set_periodic_freq(unsigned long freq); | |
| extern int hpet_rtc_dropped_irq(void); | |
| extern int hpet_rtc_timer_init(void); | |
| extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id); | |
| #endif /* CONFIG_HPET_EMULATE_RTC */ | |
| #endif /* CONFIG_HPET_TIMER */ | |
| #endif /* _I386_HPET_H */ |