| /* | |
| * Lowlevel hardware stuff for the MIPS based Cobalt microservers. | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| * | |
| * Copyright (C) 1997 Cobalt Microserver | |
| * Copyright (C) 1997, 2003 Ralf Baechle | |
| * Copyright (C) 2001, 2002, 2003 Liam Davies (ldavies@agile.tv) | |
| */ | |
| #ifndef __ASM_COBALT_H | |
| #define __ASM_COBALT_H | |
| /* | |
| * i8259 legacy interrupts used on Cobalt: | |
| * | |
| * 8 - RTC | |
| * 9 - PCI | |
| * 14 - IDE0 | |
| * 15 - IDE1 | |
| */ | |
| #define COBALT_QUBE_SLOT_IRQ 9 | |
| /* | |
| * CPU IRQs are 16 ... 23 | |
| */ | |
| #define COBALT_CPU_IRQ 16 | |
| #define COBALT_GALILEO_IRQ (COBALT_CPU_IRQ + 2) | |
| #define COBALT_SCC_IRQ (COBALT_CPU_IRQ + 3) /* pre-production has 85C30 */ | |
| #define COBALT_RAQ_SCSI_IRQ (COBALT_CPU_IRQ + 3) | |
| #define COBALT_ETH0_IRQ (COBALT_CPU_IRQ + 3) | |
| #define COBALT_QUBE1_ETH0_IRQ (COBALT_CPU_IRQ + 4) | |
| #define COBALT_ETH1_IRQ (COBALT_CPU_IRQ + 4) | |
| #define COBALT_SERIAL_IRQ (COBALT_CPU_IRQ + 5) | |
| #define COBALT_SCSI_IRQ (COBALT_CPU_IRQ + 5) | |
| #define COBALT_VIA_IRQ (COBALT_CPU_IRQ + 6) /* Chained to VIA ISA bridge */ | |
| /* | |
| * PCI configuration space manifest constants. These are wired into | |
| * the board layout according to the PCI spec to enable the software | |
| * to probe the hardware configuration space in a well defined manner. | |
| * | |
| * The PCI_DEVSHFT() macro transforms these values into numbers | |
| * suitable for passing as the dev parameter to the various | |
| * pcibios_read/write_config routines. | |
| */ | |
| #define COBALT_PCICONF_CPU 0x06 | |
| #define COBALT_PCICONF_ETH0 0x07 | |
| #define COBALT_PCICONF_RAQSCSI 0x08 | |
| #define COBALT_PCICONF_VIA 0x09 | |
| #define COBALT_PCICONF_PCISLOT 0x0A | |
| #define COBALT_PCICONF_ETH1 0x0C | |
| /* | |
| * The Cobalt board id information. The boards have an ID number wired | |
| * into the VIA that is available in the high nibble of register 94. | |
| * This register is available in the VIA configuration space through the | |
| * interface routines qube_pcibios_read/write_config. See cobalt/pci.c | |
| */ | |
| #define VIA_COBALT_BRD_ID_REG 0x94 | |
| #define VIA_COBALT_BRD_REG_to_ID(reg) ((unsigned char) (reg) >> 4) | |
| #define COBALT_BRD_ID_QUBE1 0x3 | |
| #define COBALT_BRD_ID_RAQ1 0x4 | |
| #define COBALT_BRD_ID_QUBE2 0x5 | |
| #define COBALT_BRD_ID_RAQ2 0x6 | |
| /* | |
| * Galileo chipset access macros for the Cobalt. The base address for | |
| * the GT64111 chip is 0x14000000 | |
| * | |
| * Most of this really should go into a separate GT64111 header file. | |
| */ | |
| #define GT64111_IO_BASE 0x10000000UL | |
| #define GT64111_IO_END 0x11ffffffUL | |
| #define GT64111_MEM_BASE 0x12000000UL | |
| #define GT64111_MEM_END 0x13ffffffUL | |
| #define GT64111_BASE 0x14000000UL | |
| #define GALILEO_REG(ofs) CKSEG1ADDR(GT64111_BASE + (unsigned long)(ofs)) | |
| #define GALILEO_INL(port) (*(volatile unsigned int *) GALILEO_REG(port)) | |
| #define GALILEO_OUTL(val, port) \ | |
| do { \ | |
| *(volatile unsigned int *) GALILEO_REG(port) = (val); \ | |
| } while (0) | |
| #define GALILEO_INTR_T0EXP (1 << 8) | |
| #define GALILEO_INTR_RETRY_CTR (1 << 20) | |
| #define GALILEO_ENTC0 0x01 | |
| #define GALILEO_SELTC0 0x02 | |
| #define PCI_CFG_SET(devfn,where) \ | |
| GALILEO_OUTL((0x80000000 | (PCI_SLOT (devfn) << 11) | \ | |
| (PCI_FUNC (devfn) << 8) | (where)), GT_PCI0_CFGADDR_OFS) | |
| #define COBALT_LED_PORT (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000)) | |
| # define COBALT_LED_BAR_LEFT (1 << 0) /* Qube */ | |
| # define COBALT_LED_BAR_RIGHT (1 << 1) /* Qube */ | |
| # define COBALT_LED_WEB (1 << 2) /* RaQ */ | |
| # define COBALT_LED_POWER_OFF (1 << 3) /* RaQ */ | |
| # define COBALT_LED_RESET 0x0f | |
| #define COBALT_KEY_PORT ((~*(volatile unsigned int *) CKSEG1ADDR(0x1d000000) >> 24) & COBALT_KEY_MASK) | |
| # define COBALT_KEY_CLEAR (1 << 1) | |
| # define COBALT_KEY_LEFT (1 << 2) | |
| # define COBALT_KEY_UP (1 << 3) | |
| # define COBALT_KEY_DOWN (1 << 4) | |
| # define COBALT_KEY_RIGHT (1 << 5) | |
| # define COBALT_KEY_ENTER (1 << 6) | |
| # define COBALT_KEY_SELECT (1 << 7) | |
| # define COBALT_KEY_MASK 0xfe | |
| #define COBALT_UART ((volatile unsigned char *) CKSEG1ADDR(0x1c800000)) | |
| #endif /* __ASM_COBALT_H */ |