| /* | |
| * AMD Alchemy DB1200 Referrence Board | |
| * Board Registers defines. | |
| * | |
| * ######################################################################## | |
| * | |
| * This program is free software; you can distribute it and/or modify it | |
| * under the terms of the GNU General Public License (Version 2) as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
| * for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. | |
| * | |
| * ######################################################################## | |
| * | |
| * | |
| */ | |
| #ifndef __ASM_DB1200_H | |
| #define __ASM_DB1200_H | |
| #include <linux/types.h> | |
| // This is defined in au1000.h with bogus value | |
| #undef AU1X00_EXTERNAL_INT | |
| #define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX | |
| #define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX | |
| #define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX | |
| #define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX | |
| /* SPI and SMB are muxed on the Pb1200 board. | |
| Refer to board documentation. | |
| */ | |
| #define SPI_PSC_BASE PSC0_BASE_ADDR | |
| #define SMBUS_PSC_BASE PSC0_BASE_ADDR | |
| /* AC97 and I2S are muxed on the Pb1200 board. | |
| Refer to board documentation. | |
| */ | |
| #define AC97_PSC_BASE PSC1_BASE_ADDR | |
| #define I2S_PSC_BASE PSC1_BASE_ADDR | |
| #define BCSR_KSEG1_ADDR 0xB9800000 | |
| typedef volatile struct | |
| { | |
| /*00*/ u16 whoami; | |
| u16 reserved0; | |
| /*04*/ u16 status; | |
| u16 reserved1; | |
| /*08*/ u16 switches; | |
| u16 reserved2; | |
| /*0C*/ u16 resets; | |
| u16 reserved3; | |
| /*10*/ u16 pcmcia; | |
| u16 reserved4; | |
| /*14*/ u16 board; | |
| u16 reserved5; | |
| /*18*/ u16 disk_leds; | |
| u16 reserved6; | |
| /*1C*/ u16 system; | |
| u16 reserved7; | |
| /*20*/ u16 intclr; | |
| u16 reserved8; | |
| /*24*/ u16 intset; | |
| u16 reserved9; | |
| /*28*/ u16 intclr_mask; | |
| u16 reserved10; | |
| /*2C*/ u16 intset_mask; | |
| u16 reserved11; | |
| /*30*/ u16 sig_status; | |
| u16 reserved12; | |
| /*34*/ u16 int_status; | |
| u16 reserved13; | |
| /*38*/ u16 reserved14; | |
| u16 reserved15; | |
| /*3C*/ u16 reserved16; | |
| u16 reserved17; | |
| } BCSR; | |
| static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; | |
| /* | |
| * Register bit definitions for the BCSRs | |
| */ | |
| #define BCSR_WHOAMI_DCID 0x000F | |
| #define BCSR_WHOAMI_CPLD 0x00F0 | |
| #define BCSR_WHOAMI_BOARD 0x0F00 | |
| #define BCSR_STATUS_PCMCIA0VS 0x0003 | |
| #define BCSR_STATUS_PCMCIA1VS 0x000C | |
| #define BCSR_STATUS_SWAPBOOT 0x0040 | |
| #define BCSR_STATUS_FLASHBUSY 0x0100 | |
| #define BCSR_STATUS_IDECBLID 0x0200 | |
| #define BCSR_STATUS_SD0WP 0x0400 | |
| #define BCSR_STATUS_U0RXD 0x1000 | |
| #define BCSR_STATUS_U1RXD 0x2000 | |
| #define BCSR_SWITCHES_OCTAL 0x00FF | |
| #define BCSR_SWITCHES_DIP_1 0x0080 | |
| #define BCSR_SWITCHES_DIP_2 0x0040 | |
| #define BCSR_SWITCHES_DIP_3 0x0020 | |
| #define BCSR_SWITCHES_DIP_4 0x0010 | |
| #define BCSR_SWITCHES_DIP_5 0x0008 | |
| #define BCSR_SWITCHES_DIP_6 0x0004 | |
| #define BCSR_SWITCHES_DIP_7 0x0002 | |
| #define BCSR_SWITCHES_DIP_8 0x0001 | |
| #define BCSR_SWITCHES_ROTARY 0x0F00 | |
| #define BCSR_RESETS_ETH 0x0001 | |
| #define BCSR_RESETS_CAMERA 0x0002 | |
| #define BCSR_RESETS_DC 0x0004 | |
| #define BCSR_RESETS_IDE 0x0008 | |
| #define BCSR_RESETS_TV 0x0010 | |
| /* not resets but in the same register */ | |
| #define BCSR_RESETS_PWMR1mUX 0x0800 | |
| #define BCSR_RESETS_PCS0MUX 0x1000 | |
| #define BCSR_RESETS_PCS1MUX 0x2000 | |
| #define BCSR_RESETS_SPISEL 0x4000 | |
| #define BCSR_PCMCIA_PC0VPP 0x0003 | |
| #define BCSR_PCMCIA_PC0VCC 0x000C | |
| #define BCSR_PCMCIA_PC0DRVEN 0x0010 | |
| #define BCSR_PCMCIA_PC0RST 0x0080 | |
| #define BCSR_PCMCIA_PC1VPP 0x0300 | |
| #define BCSR_PCMCIA_PC1VCC 0x0C00 | |
| #define BCSR_PCMCIA_PC1DRVEN 0x1000 | |
| #define BCSR_PCMCIA_PC1RST 0x8000 | |
| #define BCSR_BOARD_LCDVEE 0x0001 | |
| #define BCSR_BOARD_LCDVDD 0x0002 | |
| #define BCSR_BOARD_LCDBL 0x0004 | |
| #define BCSR_BOARD_CAMSNAP 0x0010 | |
| #define BCSR_BOARD_CAMPWR 0x0020 | |
| #define BCSR_BOARD_SD0PWR 0x0040 | |
| #define BCSR_LEDS_DECIMALS 0x0003 | |
| #define BCSR_LEDS_LED0 0x0100 | |
| #define BCSR_LEDS_LED1 0x0200 | |
| #define BCSR_LEDS_LED2 0x0400 | |
| #define BCSR_LEDS_LED3 0x0800 | |
| #define BCSR_SYSTEM_POWEROFF 0x4000 | |
| #define BCSR_SYSTEM_RESET 0x8000 | |
| /* Bit positions for the different interrupt sources */ | |
| #define BCSR_INT_IDE 0x0001 | |
| #define BCSR_INT_ETH 0x0002 | |
| #define BCSR_INT_PC0 0x0004 | |
| #define BCSR_INT_PC0STSCHG 0x0008 | |
| #define BCSR_INT_PC1 0x0010 | |
| #define BCSR_INT_PC1STSCHG 0x0020 | |
| #define BCSR_INT_DC 0x0040 | |
| #define BCSR_INT_FLASHBUSY 0x0080 | |
| #define BCSR_INT_PC0INSERT 0x0100 | |
| #define BCSR_INT_PC0EJECT 0x0200 | |
| #define BCSR_INT_PC1INSERT 0x0400 | |
| #define BCSR_INT_PC1EJECT 0x0800 | |
| #define BCSR_INT_SD0INSERT 0x1000 | |
| #define BCSR_INT_SD0EJECT 0x2000 | |
| #define AU1XXX_SMC91111_PHYS_ADDR (0x19000300) | |
| #define AU1XXX_SMC91111_IRQ DB1200_ETH_INT | |
| #define AU1XXX_ATA_PHYS_ADDR (0x18800000) | |
| #define AU1XXX_ATA_PHYS_LEN (0x100) | |
| #define AU1XXX_ATA_REG_OFFSET (5) | |
| #define AU1XXX_ATA_INT DB1200_IDE_INT | |
| #define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1; | |
| #define AU1XXX_ATA_RQSIZE 128 | |
| #define NAND_PHYS_ADDR 0x20000000 | |
| /* | |
| * External Interrupts for Pb1200 as of 8/6/2004. | |
| * Bit positions in the CPLD registers can be calculated by taking | |
| * the interrupt define and subtracting the DB1200_INT_BEGIN value. | |
| * *example: IDE bis pos is = 64 - 64 | |
| ETH bit pos is = 65 - 64 | |
| */ | |
| #define DB1200_INT_BEGIN (AU1000_LAST_INTC1_INT + 1) | |
| #define DB1200_IDE_INT (DB1200_INT_BEGIN + 0) | |
| #define DB1200_ETH_INT (DB1200_INT_BEGIN + 1) | |
| #define DB1200_PC0_INT (DB1200_INT_BEGIN + 2) | |
| #define DB1200_PC0_STSCHG_INT (DB1200_INT_BEGIN + 3) | |
| #define DB1200_PC1_INT (DB1200_INT_BEGIN + 4) | |
| #define DB1200_PC1_STSCHG_INT (DB1200_INT_BEGIN + 5) | |
| #define DB1200_DC_INT (DB1200_INT_BEGIN + 6) | |
| #define DB1200_FLASHBUSY_INT (DB1200_INT_BEGIN + 7) | |
| #define DB1200_PC0_INSERT_INT (DB1200_INT_BEGIN + 8) | |
| #define DB1200_PC0_EJECT_INT (DB1200_INT_BEGIN + 9) | |
| #define DB1200_PC1_INSERT_INT (DB1200_INT_BEGIN + 10) | |
| #define DB1200_PC1_EJECT_INT (DB1200_INT_BEGIN + 11) | |
| #define DB1200_SD0_INSERT_INT (DB1200_INT_BEGIN + 12) | |
| #define DB1200_SD0_EJECT_INT (DB1200_INT_BEGIN + 13) | |
| #define DB1200_INT_END (DB1200_INT_BEGIN + 15) | |
| /* For drivers/pcmcia/au1000_db1x00.c */ | |
| /* PCMCIA Db1x00 specific defines */ | |
| #define PCMCIA_MAX_SOCK 1 | |
| #define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) | |
| /* VPP/VCC */ | |
| #define SET_VCC_VPP(VCC, VPP, SLOT)\ | |
| ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) | |
| #define BOARD_PC0_INT DB1200_PC0_INT | |
| #define BOARD_PC1_INT DB1200_PC1_INT | |
| #define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET))) | |
| /* Nand chip select */ | |
| #define NAND_CS 1 | |
| #endif /* __ASM_DB1200_H */ | |