| /********************************************************************* | |
| * | |
| * Filename: irlmp_event.c | |
| * Version: 0.8 | |
| * Description: An IrDA LMP event driver for Linux | |
| * Status: Experimental. | |
| * Author: Dag Brattli <dagb@cs.uit.no> | |
| * Created at: Mon Aug 4 20:40:53 1997 | |
| * Modified at: Tue Dec 14 23:04:16 1999 | |
| * Modified by: Dag Brattli <dagb@cs.uit.no> | |
| * | |
| * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, | |
| * All Rights Reserved. | |
| * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * Neither Dag Brattli nor University of Tromsø admit liability nor | |
| * provide warranty for any of this software. This material is | |
| * provided "AS-IS" and at no charge. | |
| * | |
| ********************************************************************/ | |
| #include <linux/kernel.h> | |
| #include <net/irda/irda.h> | |
| #include <net/irda/timer.h> | |
| #include <net/irda/irlap.h> | |
| #include <net/irda/irlmp.h> | |
| #include <net/irda/irlmp_frame.h> | |
| #include <net/irda/irlmp_event.h> | |
| const char *irlmp_state[] = { | |
| "LAP_STANDBY", | |
| "LAP_U_CONNECT", | |
| "LAP_ACTIVE", | |
| }; | |
| const char *irlsap_state[] = { | |
| "LSAP_DISCONNECTED", | |
| "LSAP_CONNECT", | |
| "LSAP_CONNECT_PEND", | |
| "LSAP_DATA_TRANSFER_READY", | |
| "LSAP_SETUP", | |
| "LSAP_SETUP_PEND", | |
| }; | |
| #ifdef CONFIG_IRDA_DEBUG | |
| static const char *irlmp_event[] = { | |
| "LM_CONNECT_REQUEST", | |
| "LM_CONNECT_CONFIRM", | |
| "LM_CONNECT_RESPONSE", | |
| "LM_CONNECT_INDICATION", | |
| "LM_DISCONNECT_INDICATION", | |
| "LM_DISCONNECT_REQUEST", | |
| "LM_DATA_REQUEST", | |
| "LM_UDATA_REQUEST", | |
| "LM_DATA_INDICATION", | |
| "LM_UDATA_INDICATION", | |
| "LM_WATCHDOG_TIMEOUT", | |
| /* IrLAP events */ | |
| "LM_LAP_CONNECT_REQUEST", | |
| "LM_LAP_CONNECT_INDICATION", | |
| "LM_LAP_CONNECT_CONFIRM", | |
| "LM_LAP_DISCONNECT_INDICATION", | |
| "LM_LAP_DISCONNECT_REQUEST", | |
| "LM_LAP_DISCOVERY_REQUEST", | |
| "LM_LAP_DISCOVERY_CONFIRM", | |
| "LM_LAP_IDLE_TIMEOUT", | |
| }; | |
| #endif /* CONFIG_IRDA_DEBUG */ | |
| /* LAP Connection control proto declarations */ | |
| static void irlmp_state_standby (struct lap_cb *, IRLMP_EVENT, | |
| struct sk_buff *); | |
| static void irlmp_state_u_connect(struct lap_cb *, IRLMP_EVENT, | |
| struct sk_buff *); | |
| static void irlmp_state_active (struct lap_cb *, IRLMP_EVENT, | |
| struct sk_buff *); | |
| /* LSAP Connection control proto declarations */ | |
| static int irlmp_state_disconnected(struct lsap_cb *, IRLMP_EVENT, | |
| struct sk_buff *); | |
| static int irlmp_state_connect (struct lsap_cb *, IRLMP_EVENT, | |
| struct sk_buff *); | |
| static int irlmp_state_connect_pend(struct lsap_cb *, IRLMP_EVENT, | |
| struct sk_buff *); | |
| static int irlmp_state_dtr (struct lsap_cb *, IRLMP_EVENT, | |
| struct sk_buff *); | |
| static int irlmp_state_setup (struct lsap_cb *, IRLMP_EVENT, | |
| struct sk_buff *); | |
| static int irlmp_state_setup_pend (struct lsap_cb *, IRLMP_EVENT, | |
| struct sk_buff *); | |
| static void (*lap_state[]) (struct lap_cb *, IRLMP_EVENT, struct sk_buff *) = | |
| { | |
| irlmp_state_standby, | |
| irlmp_state_u_connect, | |
| irlmp_state_active, | |
| }; | |
| static int (*lsap_state[])( struct lsap_cb *, IRLMP_EVENT, struct sk_buff *) = | |
| { | |
| irlmp_state_disconnected, | |
| irlmp_state_connect, | |
| irlmp_state_connect_pend, | |
| irlmp_state_dtr, | |
| irlmp_state_setup, | |
| irlmp_state_setup_pend | |
| }; | |
| static inline void irlmp_next_lap_state(struct lap_cb *self, | |
| IRLMP_STATE state) | |
| { | |
| /* | |
| IRDA_DEBUG(4, "%s(), LMP LAP = %s\n", __FUNCTION__, irlmp_state[state]); | |
| */ | |
| self->lap_state = state; | |
| } | |
| static inline void irlmp_next_lsap_state(struct lsap_cb *self, | |
| LSAP_STATE state) | |
| { | |
| /* | |
| IRDA_ASSERT(self != NULL, return;); | |
| IRDA_DEBUG(4, "%s(), LMP LSAP = %s\n", __FUNCTION__, irlsap_state[state]); | |
| */ | |
| self->lsap_state = state; | |
| } | |
| /* Do connection control events */ | |
| int irlmp_do_lsap_event(struct lsap_cb *self, IRLMP_EVENT event, | |
| struct sk_buff *skb) | |
| { | |
| IRDA_ASSERT(self != NULL, return -1;); | |
| IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); | |
| IRDA_DEBUG(4, "%s(), EVENT = %s, STATE = %s\n", | |
| __FUNCTION__, irlmp_event[event], irlsap_state[ self->lsap_state]); | |
| return (*lsap_state[self->lsap_state]) (self, event, skb); | |
| } | |
| /* | |
| * Function do_lap_event (event, skb, info) | |
| * | |
| * Do IrLAP control events | |
| * | |
| */ | |
| void irlmp_do_lap_event(struct lap_cb *self, IRLMP_EVENT event, | |
| struct sk_buff *skb) | |
| { | |
| IRDA_ASSERT(self != NULL, return;); | |
| IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); | |
| IRDA_DEBUG(4, "%s(), EVENT = %s, STATE = %s\n", __FUNCTION__, | |
| irlmp_event[event], | |
| irlmp_state[self->lap_state]); | |
| (*lap_state[self->lap_state]) (self, event, skb); | |
| } | |
| void irlmp_discovery_timer_expired(void *data) | |
| { | |
| IRDA_DEBUG(4, "%s()\n", __FUNCTION__); | |
| /* We always cleanup the log (active & passive discovery) */ | |
| irlmp_do_expiry(); | |
| /* Active discovery is conditional */ | |
| if (sysctl_discovery) | |
| irlmp_do_discovery(sysctl_discovery_slots); | |
| /* Restart timer */ | |
| irlmp_start_discovery_timer(irlmp, sysctl_discovery_timeout * HZ); | |
| } | |
| void irlmp_watchdog_timer_expired(void *data) | |
| { | |
| struct lsap_cb *self = (struct lsap_cb *) data; | |
| IRDA_DEBUG(2, "%s()\n", __FUNCTION__); | |
| IRDA_ASSERT(self != NULL, return;); | |
| IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); | |
| irlmp_do_lsap_event(self, LM_WATCHDOG_TIMEOUT, NULL); | |
| } | |
| void irlmp_idle_timer_expired(void *data) | |
| { | |
| struct lap_cb *self = (struct lap_cb *) data; | |
| IRDA_DEBUG(2, "%s()\n", __FUNCTION__); | |
| IRDA_ASSERT(self != NULL, return;); | |
| IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); | |
| irlmp_do_lap_event(self, LM_LAP_IDLE_TIMEOUT, NULL); | |
| } | |
| /* | |
| * Send an event on all LSAPs attached to this LAP. | |
| */ | |
| static inline void | |
| irlmp_do_all_lsap_event(hashbin_t * lsap_hashbin, | |
| IRLMP_EVENT event) | |
| { | |
| struct lsap_cb *lsap; | |
| struct lsap_cb *lsap_next; | |
| /* Note : this function use the new hashbin_find_next() | |
| * function, instead of the old hashbin_get_next(). | |
| * This make sure that we are always pointing one lsap | |
| * ahead, so that if the current lsap is removed as the | |
| * result of sending the event, we don't care. | |
| * Also, as we store the context ourselves, if an enumeration | |
| * of the same lsap hashbin happens as the result of sending the | |
| * event, we don't care. | |
| * The only problem is if the next lsap is removed. In that case, | |
| * hashbin_find_next() will return NULL and we will abort the | |
| * enumeration. - Jean II */ | |
| /* Also : we don't accept any skb in input. We can *NOT* pass | |
| * the same skb to multiple clients safely, we would need to | |
| * skb_clone() it. - Jean II */ | |
| lsap = (struct lsap_cb *) hashbin_get_first(lsap_hashbin); | |
| while (NULL != hashbin_find_next(lsap_hashbin, | |
| (long) lsap, | |
| NULL, | |
| (void *) &lsap_next) ) { | |
| irlmp_do_lsap_event(lsap, event, NULL); | |
| lsap = lsap_next; | |
| } | |
| } | |
| /********************************************************************* | |
| * | |
| * LAP connection control states | |
| * | |
| ********************************************************************/ | |
| /* | |
| * Function irlmp_state_standby (event, skb, info) | |
| * | |
| * STANDBY, The IrLAP connection does not exist. | |
| * | |
| */ | |
| static void irlmp_state_standby(struct lap_cb *self, IRLMP_EVENT event, | |
| struct sk_buff *skb) | |
| { | |
| IRDA_DEBUG(4, "%s()\n", __FUNCTION__); | |
| IRDA_ASSERT(self->irlap != NULL, return;); | |
| switch (event) { | |
| case LM_LAP_DISCOVERY_REQUEST: | |
| /* irlmp_next_station_state( LMP_DISCOVER); */ | |
| irlap_discovery_request(self->irlap, &irlmp->discovery_cmd); | |
| break; | |
| case LM_LAP_CONNECT_INDICATION: | |
| /* It's important to switch state first, to avoid IrLMP to | |
| * think that the link is free since IrLMP may then start | |
| * discovery before the connection is properly set up. DB. | |
| */ | |
| irlmp_next_lap_state(self, LAP_ACTIVE); | |
| /* Just accept connection TODO, this should be fixed */ | |
| irlap_connect_response(self->irlap, skb); | |
| break; | |
| case LM_LAP_CONNECT_REQUEST: | |
| IRDA_DEBUG(4, "%s() LS_CONNECT_REQUEST\n", __FUNCTION__); | |
| irlmp_next_lap_state(self, LAP_U_CONNECT); | |
| /* FIXME: need to set users requested QoS */ | |
| irlap_connect_request(self->irlap, self->daddr, NULL, 0); | |
| break; | |
| case LM_LAP_DISCONNECT_INDICATION: | |
| IRDA_DEBUG(4, "%s(), Error LM_LAP_DISCONNECT_INDICATION\n", | |
| __FUNCTION__); | |
| irlmp_next_lap_state(self, LAP_STANDBY); | |
| break; | |
| default: | |
| IRDA_DEBUG(0, "%s(), Unknown event %s\n", | |
| __FUNCTION__, irlmp_event[event]); | |
| break; | |
| } | |
| } | |
| /* | |
| * Function irlmp_state_u_connect (event, skb, info) | |
| * | |
| * U_CONNECT, The layer above has tried to open an LSAP connection but | |
| * since the IrLAP connection does not exist, we must first start an | |
| * IrLAP connection. We are now waiting response from IrLAP. | |
| * */ | |
| static void irlmp_state_u_connect(struct lap_cb *self, IRLMP_EVENT event, | |
| struct sk_buff *skb) | |
| { | |
| IRDA_DEBUG(2, "%s(), event=%s\n", __FUNCTION__, irlmp_event[event]); | |
| switch (event) { | |
| case LM_LAP_CONNECT_INDICATION: | |
| /* It's important to switch state first, to avoid IrLMP to | |
| * think that the link is free since IrLMP may then start | |
| * discovery before the connection is properly set up. DB. | |
| */ | |
| irlmp_next_lap_state(self, LAP_ACTIVE); | |
| /* Just accept connection TODO, this should be fixed */ | |
| irlap_connect_response(self->irlap, skb); | |
| /* Tell LSAPs that they can start sending data */ | |
| irlmp_do_all_lsap_event(self->lsaps, LM_LAP_CONNECT_CONFIRM); | |
| /* Note : by the time we get there (LAP retries and co), | |
| * the lsaps may already have gone. This avoid getting stuck | |
| * forever in LAP_ACTIVE state - Jean II */ | |
| if (HASHBIN_GET_SIZE(self->lsaps) == 0) { | |
| IRDA_DEBUG(0, "%s() NO LSAPs !\n", __FUNCTION__); | |
| irlmp_start_idle_timer(self, LM_IDLE_TIMEOUT); | |
| } | |
| break; | |
| case LM_LAP_CONNECT_REQUEST: | |
| /* Already trying to connect */ | |
| break; | |
| case LM_LAP_CONNECT_CONFIRM: | |
| /* For all lsap_ce E Associated do LS_Connect_confirm */ | |
| irlmp_next_lap_state(self, LAP_ACTIVE); | |
| /* Tell LSAPs that they can start sending data */ | |
| irlmp_do_all_lsap_event(self->lsaps, LM_LAP_CONNECT_CONFIRM); | |
| /* Note : by the time we get there (LAP retries and co), | |
| * the lsaps may already have gone. This avoid getting stuck | |
| * forever in LAP_ACTIVE state - Jean II */ | |
| if (HASHBIN_GET_SIZE(self->lsaps) == 0) { | |
| IRDA_DEBUG(0, "%s() NO LSAPs !\n", __FUNCTION__); | |
| irlmp_start_idle_timer(self, LM_IDLE_TIMEOUT); | |
| } | |
| break; | |
| case LM_LAP_DISCONNECT_INDICATION: | |
| IRDA_DEBUG(4, "%s(), LM_LAP_DISCONNECT_INDICATION\n", __FUNCTION__); | |
| irlmp_next_lap_state(self, LAP_STANDBY); | |
| /* Send disconnect event to all LSAPs using this link */ | |
| irlmp_do_all_lsap_event(self->lsaps, | |
| LM_LAP_DISCONNECT_INDICATION); | |
| break; | |
| case LM_LAP_DISCONNECT_REQUEST: | |
| IRDA_DEBUG(4, "%s(), LM_LAP_DISCONNECT_REQUEST\n", __FUNCTION__); | |
| /* One of the LSAP did timeout or was closed, if it was | |
| * the last one, try to get out of here - Jean II */ | |
| if (HASHBIN_GET_SIZE(self->lsaps) <= 1) { | |
| irlap_disconnect_request(self->irlap); | |
| } | |
| break; | |
| default: | |
| IRDA_DEBUG(0, "%s(), Unknown event %s\n", | |
| __FUNCTION__, irlmp_event[event]); | |
| break; | |
| } | |
| } | |
| /* | |
| * Function irlmp_state_active (event, skb, info) | |
| * | |
| * ACTIVE, IrLAP connection is active | |
| * | |
| */ | |
| static void irlmp_state_active(struct lap_cb *self, IRLMP_EVENT event, | |
| struct sk_buff *skb) | |
| { | |
| IRDA_DEBUG(4, "%s()\n", __FUNCTION__); | |
| switch (event) { | |
| case LM_LAP_CONNECT_REQUEST: | |
| IRDA_DEBUG(4, "%s(), LS_CONNECT_REQUEST\n", __FUNCTION__); | |
| /* | |
| * IrLAP may have a pending disconnect. We tried to close | |
| * IrLAP, but it was postponed because the link was | |
| * busy or we were still sending packets. As we now | |
| * need it, make sure it stays on. Jean II | |
| */ | |
| irlap_clear_disconnect(self->irlap); | |
| /* | |
| * LAP connection already active, just bounce back! Since we | |
| * don't know which LSAP that tried to do this, we have to | |
| * notify all LSAPs using this LAP, but that should be safe to | |
| * do anyway. | |
| */ | |
| irlmp_do_all_lsap_event(self->lsaps, LM_LAP_CONNECT_CONFIRM); | |
| /* Needed by connect indication */ | |
| irlmp_do_all_lsap_event(irlmp->unconnected_lsaps, | |
| LM_LAP_CONNECT_CONFIRM); | |
| /* Keep state */ | |
| break; | |
| case LM_LAP_DISCONNECT_REQUEST: | |
| /* | |
| * Need to find out if we should close IrLAP or not. If there | |
| * is only one LSAP connection left on this link, that LSAP | |
| * must be the one that tries to close IrLAP. It will be | |
| * removed later and moved to the list of unconnected LSAPs | |
| */ | |
| if (HASHBIN_GET_SIZE(self->lsaps) > 0) { | |
| /* Timer value is checked in irsysctl - Jean II */ | |
| irlmp_start_idle_timer(self, sysctl_lap_keepalive_time * HZ / 1000); | |
| } else { | |
| /* No more connections, so close IrLAP */ | |
| /* We don't want to change state just yet, because | |
| * we want to reflect accurately the real state of | |
| * the LAP, not the state we wish it was in, | |
| * so that we don't lose LM_LAP_CONNECT_REQUEST. | |
| * In some cases, IrLAP won't close the LAP | |
| * immediately. For example, it might still be | |
| * retrying packets or waiting for the pf bit. | |
| * As the LAP always send a DISCONNECT_INDICATION | |
| * in PCLOSE or SCLOSE, just change state on that. | |
| * Jean II */ | |
| irlap_disconnect_request(self->irlap); | |
| } | |
| break; | |
| case LM_LAP_IDLE_TIMEOUT: | |
| if (HASHBIN_GET_SIZE(self->lsaps) == 0) { | |
| /* Same reasoning as above - keep state */ | |
| irlap_disconnect_request(self->irlap); | |
| } | |
| break; | |
| case LM_LAP_DISCONNECT_INDICATION: | |
| irlmp_next_lap_state(self, LAP_STANDBY); | |
| /* In some case, at this point our side has already closed | |
| * all lsaps, and we are waiting for the idle_timer to | |
| * expire. If another device reconnect immediately, the | |
| * idle timer will expire in the midle of the connection | |
| * initialisation, screwing up things a lot... | |
| * Therefore, we must stop the timer... */ | |
| irlmp_stop_idle_timer(self); | |
| /* | |
| * Inform all connected LSAP's using this link | |
| */ | |
| irlmp_do_all_lsap_event(self->lsaps, | |
| LM_LAP_DISCONNECT_INDICATION); | |
| /* Force an expiry of the discovery log. | |
| * Now that the LAP is free, the system may attempt to | |
| * connect to another device. Unfortunately, our entries | |
| * are stale. There is a small window (<3s) before the | |
| * normal discovery will run and where irlmp_connect_request() | |
| * can get the wrong info, so make sure things get | |
| * cleaned *NOW* ;-) - Jean II */ | |
| irlmp_do_expiry(); | |
| break; | |
| default: | |
| IRDA_DEBUG(0, "%s(), Unknown event %s\n", | |
| __FUNCTION__, irlmp_event[event]); | |
| break; | |
| } | |
| } | |
| /********************************************************************* | |
| * | |
| * LSAP connection control states | |
| * | |
| ********************************************************************/ | |
| /* | |
| * Function irlmp_state_disconnected (event, skb, info) | |
| * | |
| * DISCONNECTED | |
| * | |
| */ | |
| static int irlmp_state_disconnected(struct lsap_cb *self, IRLMP_EVENT event, | |
| struct sk_buff *skb) | |
| { | |
| int ret = 0; | |
| IRDA_DEBUG(4, "%s()\n", __FUNCTION__); | |
| IRDA_ASSERT(self != NULL, return -1;); | |
| IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); | |
| switch (event) { | |
| #ifdef CONFIG_IRDA_ULTRA | |
| case LM_UDATA_INDICATION: | |
| /* This is most bizzare. Those packets are aka unreliable | |
| * connected, aka IrLPT or SOCK_DGRAM/IRDAPROTO_UNITDATA. | |
| * Why do we pass them as Ultra ??? Jean II */ | |
| irlmp_connless_data_indication(self, skb); | |
| break; | |
| #endif /* CONFIG_IRDA_ULTRA */ | |
| case LM_CONNECT_REQUEST: | |
| IRDA_DEBUG(4, "%s(), LM_CONNECT_REQUEST\n", __FUNCTION__); | |
| if (self->conn_skb) { | |
| IRDA_WARNING("%s: busy with another request!\n", | |
| __FUNCTION__); | |
| return -EBUSY; | |
| } | |
| /* Don't forget to refcount it (see irlmp_connect_request()) */ | |
| skb_get(skb); | |
| self->conn_skb = skb; | |
| irlmp_next_lsap_state(self, LSAP_SETUP_PEND); | |
| /* Start watchdog timer (5 secs for now) */ | |
| irlmp_start_watchdog_timer(self, 5*HZ); | |
| irlmp_do_lap_event(self->lap, LM_LAP_CONNECT_REQUEST, NULL); | |
| break; | |
| case LM_CONNECT_INDICATION: | |
| if (self->conn_skb) { | |
| IRDA_WARNING("%s: busy with another request!\n", | |
| __FUNCTION__); | |
| return -EBUSY; | |
| } | |
| /* Don't forget to refcount it (see irlap_driver_rcv()) */ | |
| skb_get(skb); | |
| self->conn_skb = skb; | |
| irlmp_next_lsap_state(self, LSAP_CONNECT_PEND); | |
| /* Start watchdog timer | |
| * This is not mentionned in the spec, but there is a rare | |
| * race condition that can get the socket stuck. | |
| * If we receive this event while our LAP is closing down, | |
| * the LM_LAP_CONNECT_REQUEST get lost and we get stuck in | |
| * CONNECT_PEND state forever. | |
| * The other cause of getting stuck down there is if the | |
| * higher layer never reply to the CONNECT_INDICATION. | |
| * Anyway, it make sense to make sure that we always have | |
| * a backup plan. 1 second is plenty (should be immediate). | |
| * Jean II */ | |
| irlmp_start_watchdog_timer(self, 1*HZ); | |
| irlmp_do_lap_event(self->lap, LM_LAP_CONNECT_REQUEST, NULL); | |
| break; | |
| default: | |
| IRDA_DEBUG(1, "%s(), Unknown event %s on LSAP %#02x\n", | |
| __FUNCTION__, irlmp_event[event], self->slsap_sel); | |
| break; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Function irlmp_state_connect (self, event, skb) | |
| * | |
| * CONNECT | |
| * | |
| */ | |
| static int irlmp_state_connect(struct lsap_cb *self, IRLMP_EVENT event, | |
| struct sk_buff *skb) | |
| { | |
| struct lsap_cb *lsap; | |
| int ret = 0; | |
| IRDA_DEBUG(4, "%s()\n", __FUNCTION__); | |
| IRDA_ASSERT(self != NULL, return -1;); | |
| IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); | |
| switch (event) { | |
| case LM_CONNECT_RESPONSE: | |
| /* | |
| * Bind this LSAP to the IrLAP link where the connect was | |
| * received | |
| */ | |
| lsap = hashbin_remove(irlmp->unconnected_lsaps, (long) self, | |
| NULL); | |
| IRDA_ASSERT(lsap == self, return -1;); | |
| IRDA_ASSERT(self->lap != NULL, return -1;); | |
| IRDA_ASSERT(self->lap->lsaps != NULL, return -1;); | |
| hashbin_insert(self->lap->lsaps, (irda_queue_t *) self, | |
| (long) self, NULL); | |
| set_bit(0, &self->connected); /* TRUE */ | |
| irlmp_send_lcf_pdu(self->lap, self->dlsap_sel, | |
| self->slsap_sel, CONNECT_CNF, skb); | |
| del_timer(&self->watchdog_timer); | |
| irlmp_next_lsap_state(self, LSAP_DATA_TRANSFER_READY); | |
| break; | |
| case LM_WATCHDOG_TIMEOUT: | |
| /* May happen, who knows... | |
| * Jean II */ | |
| IRDA_DEBUG(0, "%s() WATCHDOG_TIMEOUT!\n", __FUNCTION__); | |
| /* Disconnect, get out... - Jean II */ | |
| self->lap = NULL; | |
| self->dlsap_sel = LSAP_ANY; | |
| irlmp_next_lsap_state(self, LSAP_DISCONNECTED); | |
| break; | |
| default: | |
| /* LM_LAP_DISCONNECT_INDICATION : Should never happen, we | |
| * are *not* yet bound to the IrLAP link. Jean II */ | |
| IRDA_DEBUG(0, "%s(), Unknown event %s on LSAP %#02x\n", | |
| __FUNCTION__, irlmp_event[event], self->slsap_sel); | |
| break; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Function irlmp_state_connect_pend (event, skb, info) | |
| * | |
| * CONNECT_PEND | |
| * | |
| */ | |
| static int irlmp_state_connect_pend(struct lsap_cb *self, IRLMP_EVENT event, | |
| struct sk_buff *skb) | |
| { | |
| struct sk_buff *tx_skb; | |
| int ret = 0; | |
| IRDA_DEBUG(4, "%s()\n", __FUNCTION__); | |
| IRDA_ASSERT(self != NULL, return -1;); | |
| IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); | |
| switch (event) { | |
| case LM_CONNECT_REQUEST: | |
| /* Keep state */ | |
| break; | |
| case LM_CONNECT_RESPONSE: | |
| IRDA_DEBUG(0, "%s(), LM_CONNECT_RESPONSE, " | |
| "no indication issued yet\n", __FUNCTION__); | |
| /* Keep state */ | |
| break; | |
| case LM_DISCONNECT_REQUEST: | |
| IRDA_DEBUG(0, "%s(), LM_DISCONNECT_REQUEST, " | |
| "not yet bound to IrLAP connection\n", __FUNCTION__); | |
| /* Keep state */ | |
| break; | |
| case LM_LAP_CONNECT_CONFIRM: | |
| IRDA_DEBUG(4, "%s(), LS_CONNECT_CONFIRM\n", __FUNCTION__); | |
| irlmp_next_lsap_state(self, LSAP_CONNECT); | |
| tx_skb = self->conn_skb; | |
| self->conn_skb = NULL; | |
| irlmp_connect_indication(self, tx_skb); | |
| /* Drop reference count - see irlmp_connect_indication(). */ | |
| dev_kfree_skb(tx_skb); | |
| break; | |
| case LM_WATCHDOG_TIMEOUT: | |
| /* Will happen in some rare cases because of a race condition. | |
| * Just make sure we don't stay there forever... | |
| * Jean II */ | |
| IRDA_DEBUG(0, "%s() WATCHDOG_TIMEOUT!\n", __FUNCTION__); | |
| /* Go back to disconnected mode, keep the socket waiting */ | |
| self->lap = NULL; | |
| self->dlsap_sel = LSAP_ANY; | |
| if(self->conn_skb) | |
| dev_kfree_skb(self->conn_skb); | |
| self->conn_skb = NULL; | |
| irlmp_next_lsap_state(self, LSAP_DISCONNECTED); | |
| break; | |
| default: | |
| /* LM_LAP_DISCONNECT_INDICATION : Should never happen, we | |
| * are *not* yet bound to the IrLAP link. Jean II */ | |
| IRDA_DEBUG(0, "%s(), Unknown event %s on LSAP %#02x\n", | |
| __FUNCTION__, irlmp_event[event], self->slsap_sel); | |
| break; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Function irlmp_state_dtr (self, event, skb) | |
| * | |
| * DATA_TRANSFER_READY | |
| * | |
| */ | |
| static int irlmp_state_dtr(struct lsap_cb *self, IRLMP_EVENT event, | |
| struct sk_buff *skb) | |
| { | |
| LM_REASON reason; | |
| int ret = 0; | |
| IRDA_DEBUG(4, "%s()\n", __FUNCTION__); | |
| IRDA_ASSERT(self != NULL, return -1;); | |
| IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); | |
| IRDA_ASSERT(self->lap != NULL, return -1;); | |
| switch (event) { | |
| case LM_DATA_REQUEST: /* Optimize for the common case */ | |
| irlmp_send_data_pdu(self->lap, self->dlsap_sel, | |
| self->slsap_sel, FALSE, skb); | |
| break; | |
| case LM_DATA_INDICATION: /* Optimize for the common case */ | |
| irlmp_data_indication(self, skb); | |
| break; | |
| case LM_UDATA_REQUEST: | |
| IRDA_ASSERT(skb != NULL, return -1;); | |
| irlmp_send_data_pdu(self->lap, self->dlsap_sel, | |
| self->slsap_sel, TRUE, skb); | |
| break; | |
| case LM_UDATA_INDICATION: | |
| irlmp_udata_indication(self, skb); | |
| break; | |
| case LM_CONNECT_REQUEST: | |
| IRDA_DEBUG(0, "%s(), LM_CONNECT_REQUEST, " | |
| "error, LSAP already connected\n", __FUNCTION__); | |
| /* Keep state */ | |
| break; | |
| case LM_CONNECT_RESPONSE: | |
| IRDA_DEBUG(0, "%s(), LM_CONNECT_RESPONSE, " | |
| "error, LSAP already connected\n", __FUNCTION__); | |
| /* Keep state */ | |
| break; | |
| case LM_DISCONNECT_REQUEST: | |
| irlmp_send_lcf_pdu(self->lap, self->dlsap_sel, self->slsap_sel, | |
| DISCONNECT, skb); | |
| irlmp_next_lsap_state(self, LSAP_DISCONNECTED); | |
| /* Called only from irlmp_disconnect_request(), will | |
| * unbind from LAP over there. Jean II */ | |
| /* Try to close the LAP connection if its still there */ | |
| if (self->lap) { | |
| IRDA_DEBUG(4, "%s(), trying to close IrLAP\n", | |
| __FUNCTION__); | |
| irlmp_do_lap_event(self->lap, | |
| LM_LAP_DISCONNECT_REQUEST, | |
| NULL); | |
| } | |
| break; | |
| case LM_LAP_DISCONNECT_INDICATION: | |
| irlmp_next_lsap_state(self, LSAP_DISCONNECTED); | |
| reason = irlmp_convert_lap_reason(self->lap->reason); | |
| irlmp_disconnect_indication(self, reason, NULL); | |
| break; | |
| case LM_DISCONNECT_INDICATION: | |
| irlmp_next_lsap_state(self, LSAP_DISCONNECTED); | |
| IRDA_ASSERT(self->lap != NULL, return -1;); | |
| IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;); | |
| IRDA_ASSERT(skb != NULL, return -1;); | |
| IRDA_ASSERT(skb->len > 3, return -1;); | |
| reason = skb->data[3]; | |
| /* Try to close the LAP connection */ | |
| IRDA_DEBUG(4, "%s(), trying to close IrLAP\n", __FUNCTION__); | |
| irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL); | |
| irlmp_disconnect_indication(self, reason, skb); | |
| break; | |
| default: | |
| IRDA_DEBUG(0, "%s(), Unknown event %s on LSAP %#02x\n", | |
| __FUNCTION__, irlmp_event[event], self->slsap_sel); | |
| break; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Function irlmp_state_setup (event, skb, info) | |
| * | |
| * SETUP, Station Control has set up the underlying IrLAP connection. | |
| * An LSAP connection request has been transmitted to the peer | |
| * LSAP-Connection Control FSM and we are awaiting reply. | |
| */ | |
| static int irlmp_state_setup(struct lsap_cb *self, IRLMP_EVENT event, | |
| struct sk_buff *skb) | |
| { | |
| LM_REASON reason; | |
| int ret = 0; | |
| IRDA_ASSERT(self != NULL, return -1;); | |
| IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); | |
| IRDA_DEBUG(4, "%s()\n", __FUNCTION__); | |
| switch (event) { | |
| case LM_CONNECT_CONFIRM: | |
| irlmp_next_lsap_state(self, LSAP_DATA_TRANSFER_READY); | |
| del_timer(&self->watchdog_timer); | |
| irlmp_connect_confirm(self, skb); | |
| break; | |
| case LM_DISCONNECT_INDICATION: | |
| irlmp_next_lsap_state(self, LSAP_DISCONNECTED); | |
| IRDA_ASSERT(self->lap != NULL, return -1;); | |
| IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;); | |
| IRDA_ASSERT(skb != NULL, return -1;); | |
| IRDA_ASSERT(skb->len > 3, return -1;); | |
| reason = skb->data[3]; | |
| /* Try to close the LAP connection */ | |
| IRDA_DEBUG(4, "%s(), trying to close IrLAP\n", __FUNCTION__); | |
| irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL); | |
| irlmp_disconnect_indication(self, reason, skb); | |
| break; | |
| case LM_LAP_DISCONNECT_INDICATION: | |
| irlmp_next_lsap_state(self, LSAP_DISCONNECTED); | |
| del_timer(&self->watchdog_timer); | |
| IRDA_ASSERT(self->lap != NULL, return -1;); | |
| IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;); | |
| reason = irlmp_convert_lap_reason(self->lap->reason); | |
| irlmp_disconnect_indication(self, reason, skb); | |
| break; | |
| case LM_WATCHDOG_TIMEOUT: | |
| IRDA_DEBUG(0, "%s() WATCHDOG_TIMEOUT!\n", __FUNCTION__); | |
| IRDA_ASSERT(self->lap != NULL, return -1;); | |
| irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL); | |
| irlmp_next_lsap_state(self, LSAP_DISCONNECTED); | |
| irlmp_disconnect_indication(self, LM_CONNECT_FAILURE, NULL); | |
| break; | |
| default: | |
| IRDA_DEBUG(0, "%s(), Unknown event %s on LSAP %#02x\n", | |
| __FUNCTION__, irlmp_event[event], self->slsap_sel); | |
| break; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Function irlmp_state_setup_pend (event, skb, info) | |
| * | |
| * SETUP_PEND, An LM_CONNECT_REQUEST has been received from the service | |
| * user to set up an LSAP connection. A request has been sent to the | |
| * LAP FSM to set up the underlying IrLAP connection, and we | |
| * are awaiting confirm. | |
| */ | |
| static int irlmp_state_setup_pend(struct lsap_cb *self, IRLMP_EVENT event, | |
| struct sk_buff *skb) | |
| { | |
| struct sk_buff *tx_skb; | |
| LM_REASON reason; | |
| int ret = 0; | |
| IRDA_DEBUG(4, "%s()\n", __FUNCTION__); | |
| IRDA_ASSERT(self != NULL, return -1;); | |
| IRDA_ASSERT(irlmp != NULL, return -1;); | |
| switch (event) { | |
| case LM_LAP_CONNECT_CONFIRM: | |
| IRDA_ASSERT(self->conn_skb != NULL, return -1;); | |
| tx_skb = self->conn_skb; | |
| self->conn_skb = NULL; | |
| irlmp_send_lcf_pdu(self->lap, self->dlsap_sel, | |
| self->slsap_sel, CONNECT_CMD, tx_skb); | |
| /* Drop reference count - see irlap_data_request(). */ | |
| dev_kfree_skb(tx_skb); | |
| irlmp_next_lsap_state(self, LSAP_SETUP); | |
| break; | |
| case LM_WATCHDOG_TIMEOUT: | |
| IRDA_DEBUG(0, "%s() : WATCHDOG_TIMEOUT !\n", __FUNCTION__); | |
| IRDA_ASSERT(self->lap != NULL, return -1;); | |
| irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL); | |
| irlmp_next_lsap_state(self, LSAP_DISCONNECTED); | |
| irlmp_disconnect_indication(self, LM_CONNECT_FAILURE, NULL); | |
| break; | |
| case LM_LAP_DISCONNECT_INDICATION: /* LS_Disconnect.indication */ | |
| del_timer( &self->watchdog_timer); | |
| irlmp_next_lsap_state(self, LSAP_DISCONNECTED); | |
| reason = irlmp_convert_lap_reason(self->lap->reason); | |
| irlmp_disconnect_indication(self, reason, NULL); | |
| break; | |
| default: | |
| IRDA_DEBUG(0, "%s(), Unknown event %s on LSAP %#02x\n", | |
| __FUNCTION__, irlmp_event[event], self->slsap_sel); | |
| break; | |
| } | |
| return ret; | |
| } |