| /* | |
| * NetLabel CIPSO/IPv4 Support | |
| * | |
| * This file defines the CIPSO/IPv4 functions for the NetLabel system. The | |
| * NetLabel system manages static and dynamic label mappings for network | |
| * protocols such as CIPSO and RIPSO. | |
| * | |
| * Author: Paul Moore <paul.moore@hp.com> | |
| * | |
| */ | |
| /* | |
| * (c) Copyright Hewlett-Packard Development Company, L.P., 2006 | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See | |
| * the GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| * | |
| */ | |
| #ifndef _NETLABEL_CIPSO_V4 | |
| #define _NETLABEL_CIPSO_V4 | |
| #include <net/netlabel.h> | |
| /* | |
| * The following NetLabel payloads are supported by the CIPSO subsystem. | |
| * | |
| * o ADD: | |
| * Sent by an application to add a new DOI mapping table. | |
| * | |
| * Required attributes: | |
| * | |
| * NLBL_CIPSOV4_A_DOI | |
| * NLBL_CIPSOV4_A_MTYPE | |
| * NLBL_CIPSOV4_A_TAGLST | |
| * | |
| * If using CIPSO_V4_MAP_STD the following attributes are required: | |
| * | |
| * NLBL_CIPSOV4_A_MLSLVLLST | |
| * NLBL_CIPSOV4_A_MLSCATLST | |
| * | |
| * If using CIPSO_V4_MAP_PASS no additional attributes are required. | |
| * | |
| * o REMOVE: | |
| * Sent by an application to remove a specific DOI mapping table from the | |
| * CIPSO V4 system. | |
| * | |
| * Required attributes: | |
| * | |
| * NLBL_CIPSOV4_A_DOI | |
| * | |
| * o LIST: | |
| * Sent by an application to list the details of a DOI definition. On | |
| * success the kernel should send a response using the following format. | |
| * | |
| * Required attributes: | |
| * | |
| * NLBL_CIPSOV4_A_DOI | |
| * | |
| * The valid response message format depends on the type of the DOI mapping, | |
| * the defined formats are shown below. | |
| * | |
| * Required attributes: | |
| * | |
| * NLBL_CIPSOV4_A_MTYPE | |
| * NLBL_CIPSOV4_A_TAGLST | |
| * | |
| * If using CIPSO_V4_MAP_STD the following attributes are required: | |
| * | |
| * NLBL_CIPSOV4_A_MLSLVLLST | |
| * NLBL_CIPSOV4_A_MLSCATLST | |
| * | |
| * If using CIPSO_V4_MAP_PASS no additional attributes are required. | |
| * | |
| * o LISTALL: | |
| * This message is sent by an application to list the valid DOIs on the | |
| * system. When sent by an application there is no payload and the | |
| * NLM_F_DUMP flag should be set. The kernel should respond with a series of | |
| * the following messages. | |
| * | |
| * Required attributes: | |
| * | |
| * NLBL_CIPSOV4_A_DOI | |
| * NLBL_CIPSOV4_A_MTYPE | |
| * | |
| */ | |
| /* NetLabel CIPSOv4 commands */ | |
| enum { | |
| NLBL_CIPSOV4_C_UNSPEC, | |
| NLBL_CIPSOV4_C_ADD, | |
| NLBL_CIPSOV4_C_REMOVE, | |
| NLBL_CIPSOV4_C_LIST, | |
| NLBL_CIPSOV4_C_LISTALL, | |
| __NLBL_CIPSOV4_C_MAX, | |
| }; | |
| #define NLBL_CIPSOV4_C_MAX (__NLBL_CIPSOV4_C_MAX - 1) | |
| /* NetLabel CIPSOv4 attributes */ | |
| enum { | |
| NLBL_CIPSOV4_A_UNSPEC, | |
| NLBL_CIPSOV4_A_DOI, | |
| /* (NLA_U32) | |
| * the DOI value */ | |
| NLBL_CIPSOV4_A_MTYPE, | |
| /* (NLA_U32) | |
| * the mapping table type (defined in the cipso_ipv4.h header as | |
| * CIPSO_V4_MAP_*) */ | |
| NLBL_CIPSOV4_A_TAG, | |
| /* (NLA_U8) | |
| * a CIPSO tag type, meant to be used within a NLBL_CIPSOV4_A_TAGLST | |
| * attribute */ | |
| NLBL_CIPSOV4_A_TAGLST, | |
| /* (NLA_NESTED) | |
| * the CIPSO tag list for the DOI, there must be at least one | |
| * NLBL_CIPSOV4_A_TAG attribute, tags listed first are given higher | |
| * priorirty when sending packets */ | |
| NLBL_CIPSOV4_A_MLSLVLLOC, | |
| /* (NLA_U32) | |
| * the local MLS sensitivity level */ | |
| NLBL_CIPSOV4_A_MLSLVLREM, | |
| /* (NLA_U32) | |
| * the remote MLS sensitivity level */ | |
| NLBL_CIPSOV4_A_MLSLVL, | |
| /* (NLA_NESTED) | |
| * a MLS sensitivity level mapping, must contain only one attribute of | |
| * each of the following types: NLBL_CIPSOV4_A_MLSLVLLOC and | |
| * NLBL_CIPSOV4_A_MLSLVLREM */ | |
| NLBL_CIPSOV4_A_MLSLVLLST, | |
| /* (NLA_NESTED) | |
| * the CIPSO level mappings, there must be at least one | |
| * NLBL_CIPSOV4_A_MLSLVL attribute */ | |
| NLBL_CIPSOV4_A_MLSCATLOC, | |
| /* (NLA_U32) | |
| * the local MLS category */ | |
| NLBL_CIPSOV4_A_MLSCATREM, | |
| /* (NLA_U32) | |
| * the remote MLS category */ | |
| NLBL_CIPSOV4_A_MLSCAT, | |
| /* (NLA_NESTED) | |
| * a MLS category mapping, must contain only one attribute of each of | |
| * the following types: NLBL_CIPSOV4_A_MLSCATLOC and | |
| * NLBL_CIPSOV4_A_MLSCATREM */ | |
| NLBL_CIPSOV4_A_MLSCATLST, | |
| /* (NLA_NESTED) | |
| * the CIPSO category mappings, there must be at least one | |
| * NLBL_CIPSOV4_A_MLSCAT attribute */ | |
| __NLBL_CIPSOV4_A_MAX, | |
| }; | |
| #define NLBL_CIPSOV4_A_MAX (__NLBL_CIPSOV4_A_MAX - 1) | |
| /* NetLabel protocol functions */ | |
| int netlbl_cipsov4_genl_init(void); | |
| #endif |