| /* | |
| * sound/oss/sscape.c | |
| * | |
| * Low level driver for Ensoniq SoundScape | |
| * | |
| * | |
| * Copyright (C) by Hannu Savolainen 1993-1997 | |
| * | |
| * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) | |
| * Version 2 (June 1991). See the "COPYING" file distributed with this software | |
| * for more info. | |
| * | |
| * | |
| * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) | |
| * Sergey Smitienko : ensoniq p'n'p support | |
| * Christoph Hellwig : adapted to module_init/module_exit | |
| * Bartlomiej Zolnierkiewicz : added __init to attach_sscape() | |
| * Chris Rankin : Specify that this module owns the coprocessor | |
| * Arnaldo C. de Melo : added missing restore_flags in sscape_pnp_upload_file | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include "sound_config.h" | |
| #include "sound_firmware.h" | |
| #include <linux/types.h> | |
| #include <linux/errno.h> | |
| #include <linux/signal.h> | |
| #include <linux/fcntl.h> | |
| #include <linux/ctype.h> | |
| #include <linux/stddef.h> | |
| #include <linux/kmod.h> | |
| #include <asm/dma.h> | |
| #include <asm/io.h> | |
| #include <linux/wait.h> | |
| #include <linux/slab.h> | |
| #include <linux/ioport.h> | |
| #include <linux/delay.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/spinlock.h> | |
| #include "coproc.h" | |
| #include "ad1848.h" | |
| #include "mpu401.h" | |
| /* | |
| * I/O ports | |
| */ | |
| #define MIDI_DATA 0 | |
| #define MIDI_CTRL 1 | |
| #define HOST_CTRL 2 | |
| #define TX_READY 0x02 | |
| #define RX_READY 0x01 | |
| #define HOST_DATA 3 | |
| #define ODIE_ADDR 4 | |
| #define ODIE_DATA 5 | |
| /* | |
| * Indirect registers | |
| */ | |
| #define GA_INTSTAT_REG 0 | |
| #define GA_INTENA_REG 1 | |
| #define GA_DMAA_REG 2 | |
| #define GA_DMAB_REG 3 | |
| #define GA_INTCFG_REG 4 | |
| #define GA_DMACFG_REG 5 | |
| #define GA_CDCFG_REG 6 | |
| #define GA_SMCFGA_REG 7 | |
| #define GA_SMCFGB_REG 8 | |
| #define GA_HMCTL_REG 9 | |
| /* | |
| * DMA channel identifiers (A and B) | |
| */ | |
| #define SSCAPE_DMA_A 0 | |
| #define SSCAPE_DMA_B 1 | |
| #define PORT(name) (devc->base+name) | |
| /* | |
| * Host commands recognized by the OBP microcode | |
| */ | |
| #define CMD_GEN_HOST_ACK 0x80 | |
| #define CMD_GEN_MPU_ACK 0x81 | |
| #define CMD_GET_BOARD_TYPE 0x82 | |
| #define CMD_SET_CONTROL 0x88 /* Old firmware only */ | |
| #define CMD_GET_CONTROL 0x89 /* Old firmware only */ | |
| #define CTL_MASTER_VOL 0 | |
| #define CTL_MIC_MODE 2 | |
| #define CTL_SYNTH_VOL 4 | |
| #define CTL_WAVE_VOL 7 | |
| #define CMD_SET_EXTMIDI 0x8a | |
| #define CMD_GET_EXTMIDI 0x8b | |
| #define CMD_SET_MT32 0x8c | |
| #define CMD_GET_MT32 0x8d | |
| #define CMD_ACK 0x80 | |
| #define IC_ODIE 1 | |
| #define IC_OPUS 2 | |
| typedef struct sscape_info | |
| { | |
| int base, irq, dma; | |
| int codec, codec_irq; /* required to setup pnp cards*/ | |
| int codec_type; | |
| int ic_type; | |
| char* raw_buf; | |
| unsigned long raw_buf_phys; | |
| int buffsize; /* -------------------------- */ | |
| spinlock_t lock; | |
| int ok; /* Properly detected */ | |
| int failed; | |
| int dma_allocated; | |
| int codec_audiodev; | |
| int opened; | |
| int *osp; | |
| int my_audiodev; | |
| } sscape_info; | |
| static struct sscape_info adev_info = { | |
| 0 | |
| }; | |
| static struct sscape_info *devc = &adev_info; | |
| static int sscape_mididev = -1; | |
| /* Some older cards have assigned interrupt bits differently than new ones */ | |
| static char valid_interrupts_old[] = { | |
| 9, 7, 5, 15 | |
| }; | |
| static char valid_interrupts_new[] = { | |
| 9, 5, 7, 10 | |
| }; | |
| static char *valid_interrupts = valid_interrupts_new; | |
| /* | |
| * See the bottom of the driver. This can be set by spea =0/1. | |
| */ | |
| #ifdef REVEAL_SPEA | |
| static char old_hardware = 1; | |
| #else | |
| static char old_hardware; | |
| #endif | |
| static void sleep(unsigned howlong) | |
| { | |
| current->state = TASK_INTERRUPTIBLE; | |
| schedule_timeout(howlong); | |
| } | |
| static unsigned char sscape_read(struct sscape_info *devc, int reg) | |
| { | |
| unsigned long flags; | |
| unsigned char val; | |
| spin_lock_irqsave(&devc->lock,flags); | |
| outb(reg, PORT(ODIE_ADDR)); | |
| val = inb(PORT(ODIE_DATA)); | |
| spin_unlock_irqrestore(&devc->lock,flags); | |
| return val; | |
| } | |
| static void __sscape_write(int reg, int data) | |
| { | |
| outb(reg, PORT(ODIE_ADDR)); | |
| outb(data, PORT(ODIE_DATA)); | |
| } | |
| static void sscape_write(struct sscape_info *devc, int reg, int data) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&devc->lock,flags); | |
| __sscape_write(reg, data); | |
| spin_unlock_irqrestore(&devc->lock,flags); | |
| } | |
| static unsigned char sscape_pnp_read_codec(sscape_info* devc, unsigned char reg) | |
| { | |
| unsigned char res; | |
| unsigned long flags; | |
| spin_lock_irqsave(&devc->lock,flags); | |
| outb( reg, devc -> codec); | |
| res = inb (devc -> codec + 1); | |
| spin_unlock_irqrestore(&devc->lock,flags); | |
| return res; | |
| } | |
| static void sscape_pnp_write_codec(sscape_info* devc, unsigned char reg, unsigned char data) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&devc->lock,flags); | |
| outb( reg, devc -> codec); | |
| outb( data, devc -> codec + 1); | |
| spin_unlock_irqrestore(&devc->lock,flags); | |
| } | |
| static void host_open(struct sscape_info *devc) | |
| { | |
| outb((0x00), PORT(HOST_CTRL)); /* Put the board to the host mode */ | |
| } | |
| static void host_close(struct sscape_info *devc) | |
| { | |
| outb((0x03), PORT(HOST_CTRL)); /* Put the board to the MIDI mode */ | |
| } | |
| static int host_write(struct sscape_info *devc, unsigned char *data, int count) | |
| { | |
| unsigned long flags; | |
| int i, timeout_val; | |
| spin_lock_irqsave(&devc->lock,flags); | |
| /* | |
| * Send the command and data bytes | |
| */ | |
| for (i = 0; i < count; i++) | |
| { | |
| for (timeout_val = 10000; timeout_val > 0; timeout_val--) | |
| if (inb(PORT(HOST_CTRL)) & TX_READY) | |
| break; | |
| if (timeout_val <= 0) | |
| { | |
| spin_unlock_irqrestore(&devc->lock,flags); | |
| return 0; | |
| } | |
| outb(data[i], PORT(HOST_DATA)); | |
| } | |
| spin_unlock_irqrestore(&devc->lock,flags); | |
| return 1; | |
| } | |
| static int host_read(struct sscape_info *devc) | |
| { | |
| unsigned long flags; | |
| int timeout_val; | |
| unsigned char data; | |
| spin_lock_irqsave(&devc->lock,flags); | |
| /* | |
| * Read a byte | |
| */ | |
| for (timeout_val = 10000; timeout_val > 0; timeout_val--) | |
| if (inb(PORT(HOST_CTRL)) & RX_READY) | |
| break; | |
| if (timeout_val <= 0) | |
| { | |
| spin_unlock_irqrestore(&devc->lock,flags); | |
| return -1; | |
| } | |
| data = inb(PORT(HOST_DATA)); | |
| spin_unlock_irqrestore(&devc->lock,flags); | |
| return data; | |
| } | |
| #if 0 /* unused */ | |
| static int host_command1(struct sscape_info *devc, int cmd) | |
| { | |
| unsigned char buf[10]; | |
| buf[0] = (unsigned char) (cmd & 0xff); | |
| return host_write(devc, buf, 1); | |
| } | |
| #endif /* unused */ | |
| static int host_command2(struct sscape_info *devc, int cmd, int parm1) | |
| { | |
| unsigned char buf[10]; | |
| buf[0] = (unsigned char) (cmd & 0xff); | |
| buf[1] = (unsigned char) (parm1 & 0xff); | |
| return host_write(devc, buf, 2); | |
| } | |
| static int host_command3(struct sscape_info *devc, int cmd, int parm1, int parm2) | |
| { | |
| unsigned char buf[10]; | |
| buf[0] = (unsigned char) (cmd & 0xff); | |
| buf[1] = (unsigned char) (parm1 & 0xff); | |
| buf[2] = (unsigned char) (parm2 & 0xff); | |
| return host_write(devc, buf, 3); | |
| } | |
| static void set_mt32(struct sscape_info *devc, int value) | |
| { | |
| host_open(devc); | |
| host_command2(devc, CMD_SET_MT32, value ? 1 : 0); | |
| if (host_read(devc) != CMD_ACK) | |
| { | |
| /* printk( "SNDSCAPE: Setting MT32 mode failed\n"); */ | |
| } | |
| host_close(devc); | |
| } | |
| static void set_control(struct sscape_info *devc, int ctrl, int value) | |
| { | |
| host_open(devc); | |
| host_command3(devc, CMD_SET_CONTROL, ctrl, value); | |
| if (host_read(devc) != CMD_ACK) | |
| { | |
| /* printk( "SNDSCAPE: Setting control (%d) failed\n", ctrl); */ | |
| } | |
| host_close(devc); | |
| } | |
| static void do_dma(struct sscape_info *devc, int dma_chan, unsigned long buf, int blk_size, int mode) | |
| { | |
| unsigned char temp; | |
| if (dma_chan != SSCAPE_DMA_A) | |
| { | |
| printk(KERN_WARNING "soundscape: Tried to use DMA channel != A. Why?\n"); | |
| return; | |
| } | |
| audio_devs[devc->codec_audiodev]->flags &= ~DMA_AUTOMODE; | |
| DMAbuf_start_dma(devc->codec_audiodev, buf, blk_size, mode); | |
| audio_devs[devc->codec_audiodev]->flags |= DMA_AUTOMODE; | |
| temp = devc->dma << 4; /* Setup DMA channel select bits */ | |
| if (devc->dma <= 3) | |
| temp |= 0x80; /* 8 bit DMA channel */ | |
| temp |= 1; /* Trigger DMA */ | |
| sscape_write(devc, GA_DMAA_REG, temp); | |
| temp &= 0xfe; /* Clear DMA trigger */ | |
| sscape_write(devc, GA_DMAA_REG, temp); | |
| } | |
| static int verify_mpu(struct sscape_info *devc) | |
| { | |
| /* | |
| * The SoundScape board could be in three modes (MPU, 8250 and host). | |
| * If the card is not in the MPU mode, enabling the MPU driver will | |
| * cause infinite loop (the driver believes that there is always some | |
| * received data in the buffer. | |
| * | |
| * Detect this by looking if there are more than 10 received MIDI bytes | |
| * (0x00) in the buffer. | |
| */ | |
| int i; | |
| for (i = 0; i < 10; i++) | |
| { | |
| if (inb(devc->base + HOST_CTRL) & 0x80) | |
| return 1; | |
| if (inb(devc->base) != 0x00) | |
| return 1; | |
| } | |
| printk(KERN_WARNING "SoundScape: The device is not in the MPU-401 mode\n"); | |
| return 0; | |
| } | |
| static int sscape_coproc_open(void *dev_info, int sub_device) | |
| { | |
| if (sub_device == COPR_MIDI) | |
| { | |
| set_mt32(devc, 0); | |
| if (!verify_mpu(devc)) | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| static void sscape_coproc_close(void *dev_info, int sub_device) | |
| { | |
| struct sscape_info *devc = dev_info; | |
| unsigned long flags; | |
| spin_lock_irqsave(&devc->lock,flags); | |
| if (devc->dma_allocated) | |
| { | |
| __sscape_write(GA_DMAA_REG, 0x20); /* DMA channel disabled */ | |
| devc->dma_allocated = 0; | |
| } | |
| spin_unlock_irqrestore(&devc->lock,flags); | |
| return; | |
| } | |
| static void sscape_coproc_reset(void *dev_info) | |
| { | |
| } | |
| static int sscape_download_boot(struct sscape_info *devc, unsigned char *block, int size, int flag) | |
| { | |
| unsigned long flags; | |
| unsigned char temp; | |
| volatile int done, timeout_val; | |
| static unsigned char codec_dma_bits; | |
| if (flag & CPF_FIRST) | |
| { | |
| /* | |
| * First block. Have to allocate DMA and to reset the board | |
| * before continuing. | |
| */ | |
| spin_lock_irqsave(&devc->lock,flags); | |
| codec_dma_bits = sscape_read(devc, GA_CDCFG_REG); | |
| if (devc->dma_allocated == 0) | |
| devc->dma_allocated = 1; | |
| spin_unlock_irqrestore(&devc->lock,flags); | |
| sscape_write(devc, GA_HMCTL_REG, | |
| (temp = sscape_read(devc, GA_HMCTL_REG)) & 0x3f); /*Reset */ | |
| for (timeout_val = 10000; timeout_val > 0; timeout_val--) | |
| sscape_read(devc, GA_HMCTL_REG); /* Delay */ | |
| /* Take board out of reset */ | |
| sscape_write(devc, GA_HMCTL_REG, | |
| (temp = sscape_read(devc, GA_HMCTL_REG)) | 0x80); | |
| } | |
| /* | |
| * Transfer one code block using DMA | |
| */ | |
| if (audio_devs[devc->codec_audiodev]->dmap_out->raw_buf == NULL) | |
| { | |
| printk(KERN_WARNING "soundscape: DMA buffer not available\n"); | |
| return 0; | |
| } | |
| memcpy(audio_devs[devc->codec_audiodev]->dmap_out->raw_buf, block, size); | |
| spin_lock_irqsave(&devc->lock,flags); | |
| /******** INTERRUPTS DISABLED NOW ********/ | |
| do_dma(devc, SSCAPE_DMA_A, | |
| audio_devs[devc->codec_audiodev]->dmap_out->raw_buf_phys, | |
| size, DMA_MODE_WRITE); | |
| /* | |
| * Wait until transfer completes. | |
| */ | |
| done = 0; | |
| timeout_val = 30; | |
| while (!done && timeout_val-- > 0) | |
| { | |
| int resid; | |
| if (HZ / 50) | |
| sleep(HZ / 50); | |
| clear_dma_ff(devc->dma); | |
| if ((resid = get_dma_residue(devc->dma)) == 0) | |
| done = 1; | |
| } | |
| spin_unlock_irqrestore(&devc->lock,flags); | |
| if (!done) | |
| return 0; | |
| if (flag & CPF_LAST) | |
| { | |
| /* | |
| * Take the board out of reset | |
| */ | |
| outb((0x00), PORT(HOST_CTRL)); | |
| outb((0x00), PORT(MIDI_CTRL)); | |
| temp = sscape_read(devc, GA_HMCTL_REG); | |
| temp |= 0x40; | |
| sscape_write(devc, GA_HMCTL_REG, temp); /* Kickstart the board */ | |
| /* | |
| * Wait until the ODB wakes up | |
| */ | |
| spin_lock_irqsave(&devc->lock,flags); | |
| done = 0; | |
| timeout_val = 5 * HZ; | |
| while (!done && timeout_val-- > 0) | |
| { | |
| unsigned char x; | |
| sleep(1); | |
| x = inb(PORT(HOST_DATA)); | |
| if (x == 0xff || x == 0xfe) /* OBP startup acknowledge */ | |
| { | |
| DDB(printk("Soundscape: Acknowledge = %x\n", x)); | |
| done = 1; | |
| } | |
| } | |
| sscape_write(devc, GA_CDCFG_REG, codec_dma_bits); | |
| spin_unlock_irqrestore(&devc->lock,flags); | |
| if (!done) | |
| { | |
| printk(KERN_ERR "soundscape: The OBP didn't respond after code download\n"); | |
| return 0; | |
| } | |
| spin_lock_irqsave(&devc->lock,flags); | |
| done = 0; | |
| timeout_val = 5 * HZ; | |
| while (!done && timeout_val-- > 0) | |
| { | |
| sleep(1); | |
| if (inb(PORT(HOST_DATA)) == 0xfe) /* Host startup acknowledge */ | |
| done = 1; | |
| } | |
| spin_unlock_irqrestore(&devc->lock,flags); | |
| if (!done) | |
| { | |
| printk(KERN_ERR "soundscape: OBP Initialization failed.\n"); | |
| return 0; | |
| } | |
| printk(KERN_INFO "SoundScape board initialized OK\n"); | |
| set_control(devc, CTL_MASTER_VOL, 100); | |
| set_control(devc, CTL_SYNTH_VOL, 100); | |
| #ifdef SSCAPE_DEBUG3 | |
| /* | |
| * Temporary debugging aid. Print contents of the registers after | |
| * downloading the code. | |
| */ | |
| { | |
| int i; | |
| for (i = 0; i < 13; i++) | |
| printk("I%d = %02x (new value)\n", i, sscape_read(devc, i)); | |
| } | |
| #endif | |
| } | |
| return 1; | |
| } | |
| static int download_boot_block(void *dev_info, copr_buffer * buf) | |
| { | |
| if (buf->len <= 0 || buf->len > sizeof(buf->data)) | |
| return -EINVAL; | |
| if (!sscape_download_boot(devc, buf->data, buf->len, buf->flags)) | |
| { | |
| printk(KERN_ERR "soundscape: Unable to load microcode block to the OBP.\n"); | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| static int sscape_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, int local) | |
| { | |
| copr_buffer *buf; | |
| int err; | |
| switch (cmd) | |
| { | |
| case SNDCTL_COPR_RESET: | |
| sscape_coproc_reset(dev_info); | |
| return 0; | |
| case SNDCTL_COPR_LOAD: | |
| buf = (copr_buffer *) vmalloc(sizeof(copr_buffer)); | |
| if (buf == NULL) | |
| return -ENOSPC; | |
| if (copy_from_user(buf, arg, sizeof(copr_buffer))) | |
| { | |
| vfree(buf); | |
| return -EFAULT; | |
| } | |
| err = download_boot_block(dev_info, buf); | |
| vfree(buf); | |
| return err; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static coproc_operations sscape_coproc_operations = | |
| { | |
| "SoundScape M68K", | |
| THIS_MODULE, | |
| sscape_coproc_open, | |
| sscape_coproc_close, | |
| sscape_coproc_ioctl, | |
| sscape_coproc_reset, | |
| &adev_info | |
| }; | |
| static struct resource *sscape_ports; | |
| static int sscape_is_pnp; | |
| static void __init attach_sscape(struct address_info *hw_config) | |
| { | |
| #ifndef SSCAPE_REGS | |
| /* | |
| * Config register values for Spea/V7 Media FX and Ensoniq S-2000. | |
| * These values are card | |
| * dependent. If you have another SoundScape based card, you have to | |
| * find the correct values. Do the following: | |
| * - Compile this driver with SSCAPE_DEBUG1 defined. | |
| * - Shut down and power off your machine. | |
| * - Boot with DOS so that the SSINIT.EXE program is run. | |
| * - Warm boot to {Linux|SYSV|BSD} and write down the lines displayed | |
| * when detecting the SoundScape. | |
| * - Modify the following list to use the values printed during boot. | |
| * Undefine the SSCAPE_DEBUG1 | |
| */ | |
| #define SSCAPE_REGS { \ | |
| /* I0 */ 0x00, \ | |
| /* I1 */ 0xf0, /* Note! Ignored. Set always to 0xf0 */ \ | |
| /* I2 */ 0x20, /* Note! Ignored. Set always to 0x20 */ \ | |
| /* I3 */ 0x20, /* Note! Ignored. Set always to 0x20 */ \ | |
| /* I4 */ 0xf5, /* Ignored */ \ | |
| /* I5 */ 0x10, \ | |
| /* I6 */ 0x00, \ | |
| /* I7 */ 0x2e, /* I7 MEM config A. Likely to vary between models */ \ | |
| /* I8 */ 0x00, /* I8 MEM config B. Likely to vary between models */ \ | |
| /* I9 */ 0x40 /* Ignored */ \ | |
| } | |
| #endif | |
| unsigned long flags; | |
| static unsigned char regs[10] = SSCAPE_REGS; | |
| int i, irq_bits = 0xff; | |
| if (old_hardware) | |
| { | |
| valid_interrupts = valid_interrupts_old; | |
| conf_printf("Ensoniq SoundScape (old)", hw_config); | |
| } | |
| else | |
| conf_printf("Ensoniq SoundScape", hw_config); | |
| for (i = 0; i < 4; i++) | |
| { | |
| if (hw_config->irq == valid_interrupts[i]) | |
| { | |
| irq_bits = i; | |
| break; | |
| } | |
| } | |
| if (hw_config->irq > 15 || (regs[4] = irq_bits == 0xff)) | |
| { | |
| printk(KERN_ERR "Invalid IRQ%d\n", hw_config->irq); | |
| release_region(devc->base, 2); | |
| release_region(devc->base + 2, 6); | |
| if (sscape_is_pnp) | |
| release_region(devc->codec, 2); | |
| return; | |
| } | |
| if (!sscape_is_pnp) { | |
| spin_lock_irqsave(&devc->lock,flags); | |
| /* Host interrupt enable */ | |
| sscape_write(devc, 1, 0xf0); /* All interrupts enabled */ | |
| /* DMA A status/trigger register */ | |
| sscape_write(devc, 2, 0x20); /* DMA channel disabled */ | |
| /* DMA B status/trigger register */ | |
| sscape_write(devc, 3, 0x20); /* DMA channel disabled */ | |
| /* Host interrupt config reg */ | |
| sscape_write(devc, 4, 0xf0 | (irq_bits << 2) | irq_bits); | |
| /* Don't destroy CD-ROM DMA config bits (0xc0) */ | |
| sscape_write(devc, 5, (regs[5] & 0x3f) | (sscape_read(devc, 5) & 0xc0)); | |
| /* CD-ROM config (WSS codec actually) */ | |
| sscape_write(devc, 6, regs[6]); | |
| sscape_write(devc, 7, regs[7]); | |
| sscape_write(devc, 8, regs[8]); | |
| /* Master control reg. Don't modify CR-ROM bits. Disable SB emul */ | |
| sscape_write(devc, 9, (sscape_read(devc, 9) & 0xf0) | 0x08); | |
| spin_unlock_irqrestore(&devc->lock,flags); | |
| } | |
| #ifdef SSCAPE_DEBUG2 | |
| /* | |
| * Temporary debugging aid. Print contents of the registers after | |
| * changing them. | |
| */ | |
| { | |
| int i; | |
| for (i = 0; i < 13; i++) | |
| printk("I%d = %02x (new value)\n", i, sscape_read(devc, i)); | |
| } | |
| #endif | |
| if (probe_mpu401(hw_config, sscape_ports)) | |
| hw_config->always_detect = 1; | |
| hw_config->name = "SoundScape"; | |
| hw_config->irq *= -1; /* Negative value signals IRQ sharing */ | |
| attach_mpu401(hw_config, THIS_MODULE); | |
| hw_config->irq *= -1; /* Restore it */ | |
| if (hw_config->slots[1] != -1) /* The MPU driver installed itself */ | |
| { | |
| sscape_mididev = hw_config->slots[1]; | |
| midi_devs[hw_config->slots[1]]->coproc = &sscape_coproc_operations; | |
| } | |
| sscape_write(devc, GA_INTENA_REG, 0x80); /* Master IRQ enable */ | |
| devc->ok = 1; | |
| devc->failed = 0; | |
| } | |
| static int detect_ga(sscape_info * devc) | |
| { | |
| unsigned char save; | |
| DDB(printk("Entered Soundscape detect_ga(%x)\n", devc->base)); | |
| /* | |
| * First check that the address register of "ODIE" is | |
| * there and that it has exactly 4 writable bits. | |
| * First 4 bits | |
| */ | |
| if ((save = inb(PORT(ODIE_ADDR))) & 0xf0) | |
| { | |
| DDB(printk("soundscape: Detect error A\n")); | |
| return 0; | |
| } | |
| outb((0x00), PORT(ODIE_ADDR)); | |
| if (inb(PORT(ODIE_ADDR)) != 0x00) | |
| { | |
| DDB(printk("soundscape: Detect error B\n")); | |
| return 0; | |
| } | |
| outb((0xff), PORT(ODIE_ADDR)); | |
| if (inb(PORT(ODIE_ADDR)) != 0x0f) | |
| { | |
| DDB(printk("soundscape: Detect error C\n")); | |
| return 0; | |
| } | |
| outb((save), PORT(ODIE_ADDR)); | |
| /* | |
| * Now verify that some indirect registers return zero on some bits. | |
| * This may break the driver with some future revisions of "ODIE" but... | |
| */ | |
| if (sscape_read(devc, 0) & 0x0c) | |
| { | |
| DDB(printk("soundscape: Detect error D (%x)\n", sscape_read(devc, 0))); | |
| return 0; | |
| } | |
| if (sscape_read(devc, 1) & 0x0f) | |
| { | |
| DDB(printk("soundscape: Detect error E\n")); | |
| return 0; | |
| } | |
| if (sscape_read(devc, 5) & 0x0f) | |
| { | |
| DDB(printk("soundscape: Detect error F\n")); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| static int sscape_read_host_ctrl(sscape_info* devc) | |
| { | |
| return host_read(devc); | |
| } | |
| static void sscape_write_host_ctrl2(sscape_info *devc, int a, int b) | |
| { | |
| host_command2(devc, a, b); | |
| } | |
| static int sscape_alloc_dma(sscape_info *devc) | |
| { | |
| char *start_addr, *end_addr; | |
| int dma_pagesize; | |
| int sz, size; | |
| struct page *page; | |
| if (devc->raw_buf != NULL) return 0; /* Already done */ | |
| dma_pagesize = (devc->dma < 4) ? (64 * 1024) : (128 * 1024); | |
| devc->raw_buf = NULL; | |
| devc->buffsize = 8192*4; | |
| if (devc->buffsize > dma_pagesize) devc->buffsize = dma_pagesize; | |
| start_addr = NULL; | |
| /* | |
| * Now loop until we get a free buffer. Try to get smaller buffer if | |
| * it fails. Don't accept smaller than 8k buffer for performance | |
| * reasons. | |
| */ | |
| while (start_addr == NULL && devc->buffsize > PAGE_SIZE) { | |
| for (sz = 0, size = PAGE_SIZE; size < devc->buffsize; sz++, size <<= 1); | |
| devc->buffsize = PAGE_SIZE * (1 << sz); | |
| start_addr = (char *) __get_free_pages(GFP_ATOMIC|GFP_DMA, sz); | |
| if (start_addr == NULL) devc->buffsize /= 2; | |
| } | |
| if (start_addr == NULL) { | |
| printk(KERN_ERR "sscape pnp init error: Couldn't allocate DMA buffer\n"); | |
| return 0; | |
| } else { | |
| /* make some checks */ | |
| end_addr = start_addr + devc->buffsize - 1; | |
| /* now check if it fits into the same dma-pagesize */ | |
| if (((long) start_addr & ~(dma_pagesize - 1)) != ((long) end_addr & ~(dma_pagesize - 1)) | |
| || end_addr >= (char *) (MAX_DMA_ADDRESS)) { | |
| printk(KERN_ERR "sscape pnp: Got invalid address 0x%lx for %db DMA-buffer\n", (long) start_addr, devc->buffsize); | |
| return 0; | |
| } | |
| } | |
| devc->raw_buf = start_addr; | |
| devc->raw_buf_phys = virt_to_bus(start_addr); | |
| for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++) | |
| SetPageReserved(page); | |
| return 1; | |
| } | |
| static void sscape_free_dma(sscape_info *devc) | |
| { | |
| int sz, size; | |
| unsigned long start_addr, end_addr; | |
| struct page *page; | |
| if (devc->raw_buf == NULL) return; | |
| for (sz = 0, size = PAGE_SIZE; size < devc->buffsize; sz++, size <<= 1); | |
| start_addr = (unsigned long) devc->raw_buf; | |
| end_addr = start_addr + devc->buffsize; | |
| for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++) | |
| ClearPageReserved(page); | |
| free_pages((unsigned long) devc->raw_buf, sz); | |
| devc->raw_buf = NULL; | |
| } | |
| /* Intel version !!!!!!!!! */ | |
| static int sscape_start_dma(int chan, unsigned long physaddr, int count, int dma_mode) | |
| { | |
| unsigned long flags; | |
| flags = claim_dma_lock(); | |
| disable_dma(chan); | |
| clear_dma_ff(chan); | |
| set_dma_mode(chan, dma_mode); | |
| set_dma_addr(chan, physaddr); | |
| set_dma_count(chan, count); | |
| enable_dma(chan); | |
| release_dma_lock(flags); | |
| return 0; | |
| } | |
| static void sscape_pnp_start_dma(sscape_info* devc, int arg ) | |
| { | |
| int reg; | |
| if (arg == 0) reg = 2; | |
| else reg = 3; | |
| sscape_write(devc, reg, sscape_read( devc, reg) | 0x01); | |
| sscape_write(devc, reg, sscape_read( devc, reg) & 0xFE); | |
| } | |
| static int sscape_pnp_wait_dma (sscape_info* devc, int arg ) | |
| { | |
| int reg; | |
| unsigned long i; | |
| unsigned char d; | |
| if (arg == 0) reg = 2; | |
| else reg = 3; | |
| sleep ( 1 ); | |
| i = 0; | |
| do { | |
| d = sscape_read(devc, reg) & 1; | |
| if ( d == 1) break; | |
| i++; | |
| } while (i < 500000); | |
| d = sscape_read(devc, reg) & 1; | |
| return d; | |
| } | |
| static int sscape_pnp_alloc_dma(sscape_info* devc) | |
| { | |
| /* printk(KERN_INFO "sscape: requesting dma\n"); */ | |
| if (request_dma(devc -> dma, "sscape")) return 0; | |
| /* printk(KERN_INFO "sscape: dma channel allocated\n"); */ | |
| if (!sscape_alloc_dma(devc)) { | |
| free_dma(devc -> dma); | |
| return 0; | |
| }; | |
| return 1; | |
| } | |
| static void sscape_pnp_free_dma(sscape_info* devc) | |
| { | |
| sscape_free_dma( devc); | |
| free_dma(devc -> dma ); | |
| /* printk(KERN_INFO "sscape: dma released\n"); */ | |
| } | |
| static int sscape_pnp_upload_file(sscape_info* devc, char* fn) | |
| { | |
| int done = 0; | |
| int timeout_val; | |
| char* data,*dt; | |
| int len,l; | |
| unsigned long flags; | |
| sscape_write( devc, 9, sscape_read(devc, 9 ) & 0x3F ); | |
| sscape_write( devc, 2, (devc -> dma << 4) | 0x80 ); | |
| sscape_write( devc, 3, 0x20 ); | |
| sscape_write( devc, 9, sscape_read( devc, 9 ) | 0x80 ); | |
| len = mod_firmware_load(fn, &data); | |
| if (len == 0) { | |
| printk(KERN_ERR "sscape: file not found: %s\n", fn); | |
| return 0; | |
| } | |
| dt = data; | |
| spin_lock_irqsave(&devc->lock,flags); | |
| while ( len > 0 ) { | |
| if (len > devc -> buffsize) l = devc->buffsize; | |
| else l = len; | |
| len -= l; | |
| memcpy(devc->raw_buf, dt, l); dt += l; | |
| sscape_start_dma(devc->dma, devc->raw_buf_phys, l, 0x48); | |
| sscape_pnp_start_dma ( devc, 0 ); | |
| if (sscape_pnp_wait_dma ( devc, 0 ) == 0) { | |
| spin_unlock_irqrestore(&devc->lock,flags); | |
| return 0; | |
| } | |
| } | |
| spin_unlock_irqrestore(&devc->lock,flags); | |
| vfree(data); | |
| outb(0, devc -> base + 2); | |
| outb(0, devc -> base); | |
| sscape_write ( devc, 9, sscape_read( devc, 9 ) | 0x40); | |
| timeout_val = 5 * HZ; | |
| while (!done && timeout_val-- > 0) | |
| { | |
| unsigned char x; | |
| sleep(1); | |
| x = inb( devc -> base + 3); | |
| if (x == 0xff || x == 0xfe) /* OBP startup acknowledge */ | |
| { | |
| //printk(KERN_ERR "Soundscape: Acknowledge = %x\n", x); | |
| done = 1; | |
| } | |
| } | |
| timeout_val = 5 * HZ; | |
| done = 0; | |
| while (!done && timeout_val-- > 0) | |
| { | |
| unsigned char x; | |
| sleep(1); | |
| x = inb( devc -> base + 3); | |
| if (x == 0xfe) /* OBP startup acknowledge */ | |
| { | |
| //printk(KERN_ERR "Soundscape: Acknowledge = %x\n", x); | |
| done = 1; | |
| } | |
| } | |
| if ( !done ) printk(KERN_ERR "soundscape: OBP Initialization failed.\n"); | |
| sscape_write( devc, 2, devc->ic_type == IC_ODIE ? 0x70 : 0x40); | |
| sscape_write( devc, 3, (devc -> dma << 4) + 0x80); | |
| return 1; | |
| } | |
| static void __init sscape_pnp_init_hw(sscape_info* devc) | |
| { | |
| unsigned char midi_irq = 0, sb_irq = 0; | |
| unsigned i; | |
| static char code_file_name[23] = "/sndscape/sndscape.cox"; | |
| int sscape_joystic_enable = 0x7f; | |
| int sscape_mic_enable = 0; | |
| int sscape_ext_midi = 0; | |
| if ( !sscape_pnp_alloc_dma(devc) ) { | |
| printk(KERN_ERR "sscape: faild to allocate dma\n"); | |
| return; | |
| } | |
| for (i = 0; i < 4; i++) { | |
| if ( devc -> irq == valid_interrupts[i] ) | |
| midi_irq = i; | |
| if ( devc -> codec_irq == valid_interrupts[i] ) | |
| sb_irq = i; | |
| } | |
| sscape_write( devc, 5, 0x50); | |
| sscape_write( devc, 7, 0x2e); | |
| sscape_write( devc, 8, 0x00); | |
| sscape_write( devc, 2, devc->ic_type == IC_ODIE ? 0x70 : 0x40); | |
| sscape_write( devc, 3, ( devc -> dma << 4) | 0x80); | |
| sscape_write (devc, 4, 0xF0 | (midi_irq<<2) | midi_irq); | |
| i = 0x10; //sscape_read(devc, 9) & (devc->ic_type == IC_ODIE ? 0xf0 : 0xc0); | |
| if (sscape_joystic_enable) i |= 8; | |
| sscape_write (devc, 9, i); | |
| sscape_write (devc, 6, 0x80); | |
| sscape_write (devc, 1, 0x80); | |
| if (devc -> codec_type == 2) { | |
| sscape_pnp_write_codec( devc, 0x0C, 0x50); | |
| sscape_pnp_write_codec( devc, 0x10, sscape_pnp_read_codec( devc, 0x10) & 0x3F); | |
| sscape_pnp_write_codec( devc, 0x11, sscape_pnp_read_codec( devc, 0x11) | 0xC0); | |
| sscape_pnp_write_codec( devc, 29, 0x20); | |
| } | |
| if (sscape_pnp_upload_file(devc, "/sndscape/scope.cod") == 0 ) { | |
| printk(KERN_ERR "sscape: faild to upload file /sndscape/scope.cod\n"); | |
| sscape_pnp_free_dma(devc); | |
| return; | |
| } | |
| i = sscape_read_host_ctrl( devc ); | |
| if ( (i & 0x0F) > 7 ) { | |
| printk(KERN_ERR "sscape: scope.cod faild\n"); | |
| sscape_pnp_free_dma(devc); | |
| return; | |
| } | |
| if ( i & 0x10 ) sscape_write( devc, 7, 0x2F); | |
| code_file_name[21] = (char) ( i & 0x0F) + 0x30; | |
| if (sscape_pnp_upload_file( devc, code_file_name) == 0) { | |
| printk(KERN_ERR "sscape: faild to upload file %s\n", code_file_name); | |
| sscape_pnp_free_dma(devc); | |
| return; | |
| } | |
| if (devc->ic_type != IC_ODIE) { | |
| sscape_pnp_write_codec( devc, 10, (sscape_pnp_read_codec(devc, 10) & 0x7f) | | |
| ( sscape_mic_enable == 0 ? 0x00 : 0x80) ); | |
| } | |
| sscape_write_host_ctrl2( devc, 0x84, 0x64 ); /* MIDI volume */ | |
| sscape_write_host_ctrl2( devc, 0x86, 0x64 ); /* MIDI volume?? */ | |
| sscape_write_host_ctrl2( devc, 0x8A, sscape_ext_midi); | |
| sscape_pnp_write_codec ( devc, 6, 0x3f ); //WAV_VOL | |
| sscape_pnp_write_codec ( devc, 7, 0x3f ); //WAV_VOL | |
| sscape_pnp_write_codec ( devc, 2, 0x1F ); //WD_CDXVOLL | |
| sscape_pnp_write_codec ( devc, 3, 0x1F ); //WD_CDXVOLR | |
| if (devc -> codec_type == 1) { | |
| sscape_pnp_write_codec ( devc, 4, 0x1F ); | |
| sscape_pnp_write_codec ( devc, 5, 0x1F ); | |
| sscape_write_host_ctrl2( devc, 0x88, sscape_mic_enable); | |
| } else { | |
| int t; | |
| sscape_pnp_write_codec ( devc, 0x10, 0x1F << 1); | |
| sscape_pnp_write_codec ( devc, 0x11, 0xC0 | (0x1F << 1)); | |
| t = sscape_pnp_read_codec( devc, 0x00) & 0xDF; | |
| if ( (sscape_mic_enable == 0)) t |= 0; | |
| else t |= 0x20; | |
| sscape_pnp_write_codec ( devc, 0x00, t); | |
| t = sscape_pnp_read_codec( devc, 0x01) & 0xDF; | |
| if ( (sscape_mic_enable == 0) ) t |= 0; | |
| else t |= 0x20; | |
| sscape_pnp_write_codec ( devc, 0x01, t); | |
| sscape_pnp_write_codec ( devc, 0x40 | 29 , 0x20); | |
| outb(0, devc -> codec); | |
| } | |
| if (devc -> ic_type == IC_OPUS ) { | |
| int i = sscape_read( devc, 9 ); | |
| sscape_write( devc, 9, i | 3 ); | |
| sscape_write( devc, 3, 0x40); | |
| if (request_region(0x228, 1, "sscape setup junk")) { | |
| outb(0, 0x228); | |
| release_region(0x228,1); | |
| } | |
| sscape_write( devc, 3, (devc -> dma << 4) | 0x80); | |
| sscape_write( devc, 9, i ); | |
| } | |
| host_close ( devc ); | |
| sscape_pnp_free_dma(devc); | |
| } | |
| static int __init detect_sscape_pnp(sscape_info* devc) | |
| { | |
| long i, irq_bits = 0xff; | |
| unsigned int d; | |
| DDB(printk("Entered detect_sscape_pnp(%x)\n", devc->base)); | |
| if (!request_region(devc->codec, 2, "sscape codec")) { | |
| printk(KERN_ERR "detect_sscape_pnp: port %x is not free\n", devc->codec); | |
| return 0; | |
| } | |
| if ((inb(devc->base + 2) & 0x78) != 0) | |
| goto fail; | |
| d = inb ( devc -> base + 4) & 0xF0; | |
| if (d & 0x80) | |
| goto fail; | |
| if (d == 0) { | |
| devc->codec_type = 1; | |
| devc->ic_type = IC_ODIE; | |
| } else if ( (d & 0x60) != 0) { | |
| devc->codec_type = 2; | |
| devc->ic_type = IC_OPUS; | |
| } else if ( (d & 0x40) != 0) { /* WTF? */ | |
| devc->codec_type = 2; | |
| devc->ic_type = IC_ODIE; | |
| } else | |
| goto fail; | |
| sscape_is_pnp = 1; | |
| outb(0xFA, devc -> base+4); | |
| if ((inb( devc -> base+4) & 0x9F) != 0x0A) | |
| goto fail; | |
| outb(0xFE, devc -> base+4); | |
| if ( (inb(devc -> base+4) & 0x9F) != 0x0E) | |
| goto fail; | |
| if ( (inb(devc -> base+5) & 0x9F) != 0x0E) | |
| goto fail; | |
| if (devc->codec_type == 2) { | |
| if (devc->codec != devc->base + 8) { | |
| printk("soundscape warning: incorrect codec port specified\n"); | |
| goto fail; | |
| } | |
| d = 0x10 | (sscape_read(devc, 9) & 0xCF); | |
| sscape_write(devc, 9, d); | |
| sscape_write(devc, 6, 0x80); | |
| } else { | |
| //todo: check codec is not base + 8 | |
| } | |
| d = (sscape_read(devc, 9) & 0x3F) | 0xC0; | |
| sscape_write(devc, 9, d); | |
| for (i = 0; i < 550000; i++) | |
| if ( !(inb(devc -> codec) & 0x80) ) break; | |
| d = inb(devc -> codec); | |
| if (d & 0x80) | |
| goto fail; | |
| if ( inb(devc -> codec + 2) == 0xFF) | |
| goto fail; | |
| sscape_write(devc, 9, sscape_read(devc, 9) & 0x3F ); | |
| d = inb(devc -> codec) & 0x80; | |
| if ( d == 0) { | |
| printk(KERN_INFO "soundscape: hardware detected\n"); | |
| valid_interrupts = valid_interrupts_new; | |
| } else { | |
| printk(KERN_INFO "soundscape: board looks like media fx\n"); | |
| valid_interrupts = valid_interrupts_old; | |
| old_hardware = 1; | |
| } | |
| sscape_write( devc, 9, 0xC0 | (sscape_read(devc, 9) & 0x3F) ); | |
| for (i = 0; i < 550000; i++) | |
| if ( !(inb(devc -> codec) & 0x80)) | |
| break; | |
| sscape_pnp_init_hw(devc); | |
| for (i = 0; i < 4; i++) | |
| { | |
| if (devc->codec_irq == valid_interrupts[i]) { | |
| irq_bits = i; | |
| break; | |
| } | |
| } | |
| sscape_write(devc, GA_INTENA_REG, 0x00); | |
| sscape_write(devc, GA_DMACFG_REG, 0x50); | |
| sscape_write(devc, GA_DMAA_REG, 0x70); | |
| sscape_write(devc, GA_DMAB_REG, 0x20); | |
| sscape_write(devc, GA_INTCFG_REG, 0xf0); | |
| sscape_write(devc, GA_CDCFG_REG, 0x89 | (devc->dma << 4) | (irq_bits << 1)); | |
| sscape_pnp_write_codec( devc, 0, sscape_pnp_read_codec( devc, 0) | 0x20); | |
| sscape_pnp_write_codec( devc, 0, sscape_pnp_read_codec( devc, 1) | 0x20); | |
| return 1; | |
| fail: | |
| release_region(devc->codec, 2); | |
| return 0; | |
| } | |
| static int __init probe_sscape(struct address_info *hw_config) | |
| { | |
| devc->base = hw_config->io_base; | |
| devc->irq = hw_config->irq; | |
| devc->dma = hw_config->dma; | |
| devc->osp = hw_config->osp; | |
| #ifdef SSCAPE_DEBUG1 | |
| /* | |
| * Temporary debugging aid. Print contents of the registers before | |
| * changing them. | |
| */ | |
| { | |
| int i; | |
| for (i = 0; i < 13; i++) | |
| printk("I%d = %02x (old value)\n", i, sscape_read(devc, i)); | |
| } | |
| #endif | |
| devc->failed = 1; | |
| sscape_ports = request_region(devc->base, 2, "mpu401"); | |
| if (!sscape_ports) | |
| return 0; | |
| if (!request_region(devc->base + 2, 6, "SoundScape")) { | |
| release_region(devc->base, 2); | |
| return 0; | |
| } | |
| if (!detect_ga(devc)) { | |
| if (detect_sscape_pnp(devc)) | |
| return 1; | |
| release_region(devc->base, 2); | |
| release_region(devc->base + 2, 6); | |
| return 0; | |
| } | |
| if (old_hardware) /* Check that it's really an old Spea/Reveal card. */ | |
| { | |
| unsigned char tmp; | |
| int cc; | |
| if (!((tmp = sscape_read(devc, GA_HMCTL_REG)) & 0xc0)) | |
| { | |
| sscape_write(devc, GA_HMCTL_REG, tmp | 0x80); | |
| for (cc = 0; cc < 200000; ++cc) | |
| inb(devc->base + ODIE_ADDR); | |
| } | |
| } | |
| return 1; | |
| } | |
| static int __init init_ss_ms_sound(struct address_info *hw_config) | |
| { | |
| int i, irq_bits = 0xff; | |
| int ad_flags = 0; | |
| struct resource *ports; | |
| if (devc->failed) | |
| { | |
| printk(KERN_ERR "soundscape: Card not detected\n"); | |
| return 0; | |
| } | |
| if (devc->ok == 0) | |
| { | |
| printk(KERN_ERR "soundscape: Invalid initialization order.\n"); | |
| return 0; | |
| } | |
| for (i = 0; i < 4; i++) | |
| { | |
| if (hw_config->irq == valid_interrupts[i]) | |
| { | |
| irq_bits = i; | |
| break; | |
| } | |
| } | |
| if (irq_bits == 0xff) { | |
| printk(KERN_ERR "soundscape: Invalid MSS IRQ%d\n", hw_config->irq); | |
| return 0; | |
| } | |
| if (old_hardware) | |
| ad_flags = 0x12345677; /* Tell that we may have a CS4248 chip (Spea-V7 Media FX) */ | |
| else if (sscape_is_pnp) | |
| ad_flags = 0x87654321; /* Tell that we have a soundscape pnp with 1845 chip */ | |
| ports = request_region(hw_config->io_base, 4, "ad1848"); | |
| if (!ports) { | |
| printk(KERN_ERR "soundscape: ports busy\n"); | |
| return 0; | |
| } | |
| if (!ad1848_detect(ports, &ad_flags, hw_config->osp)) { | |
| release_region(hw_config->io_base, 4); | |
| return 0; | |
| } | |
| if (!sscape_is_pnp) /*pnp is already setup*/ | |
| { | |
| /* | |
| * Setup the DMA polarity. | |
| */ | |
| sscape_write(devc, GA_DMACFG_REG, 0x50); | |
| /* | |
| * Take the gate-array off of the DMA channel. | |
| */ | |
| sscape_write(devc, GA_DMAB_REG, 0x20); | |
| /* | |
| * Init the AD1848 (CD-ROM) config reg. | |
| */ | |
| sscape_write(devc, GA_CDCFG_REG, 0x89 | (hw_config->dma << 4) | (irq_bits << 1)); | |
| } | |
| if (hw_config->irq == devc->irq) | |
| printk(KERN_WARNING "soundscape: Warning! The WSS mode can't share IRQ with MIDI\n"); | |
| hw_config->slots[0] = ad1848_init( | |
| sscape_is_pnp ? "SoundScape" : "SoundScape PNP", | |
| ports, | |
| hw_config->irq, | |
| hw_config->dma, | |
| hw_config->dma, | |
| 0, | |
| devc->osp, | |
| THIS_MODULE); | |
| if (hw_config->slots[0] != -1) /* The AD1848 driver installed itself */ | |
| { | |
| audio_devs[hw_config->slots[0]]->coproc = &sscape_coproc_operations; | |
| devc->codec_audiodev = hw_config->slots[0]; | |
| devc->my_audiodev = hw_config->slots[0]; | |
| /* Set proper routings here (what are they) */ | |
| AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE); | |
| } | |
| #ifdef SSCAPE_DEBUG5 | |
| /* | |
| * Temporary debugging aid. Print contents of the registers | |
| * after the AD1848 device has been initialized. | |
| */ | |
| { | |
| int i; | |
| for (i = 0; i < 13; i++) | |
| printk("I%d = %02x\n", i, sscape_read(devc, i)); | |
| } | |
| #endif | |
| return 1; | |
| } | |
| static void __exit unload_sscape(struct address_info *hw_config) | |
| { | |
| release_region(devc->base + 2, 6); | |
| unload_mpu401(hw_config); | |
| if (sscape_is_pnp) | |
| release_region(devc->codec, 2); | |
| } | |
| static void __exit unload_ss_ms_sound(struct address_info *hw_config) | |
| { | |
| ad1848_unload(hw_config->io_base, | |
| hw_config->irq, | |
| devc->dma, | |
| devc->dma, | |
| 0); | |
| sound_unload_audiodev(hw_config->slots[0]); | |
| } | |
| static struct address_info cfg; | |
| static struct address_info cfg_mpu; | |
| static int __initdata spea = -1; | |
| static int mss = 0; | |
| static int __initdata dma = -1; | |
| static int __initdata irq = -1; | |
| static int __initdata io = -1; | |
| static int __initdata mpu_irq = -1; | |
| static int __initdata mpu_io = -1; | |
| module_param(dma, int, 0); | |
| module_param(irq, int, 0); | |
| module_param(io, int, 0); | |
| module_param(spea, int, 0); /* spea=0/1 set the old_hardware */ | |
| module_param(mpu_irq, int, 0); | |
| module_param(mpu_io, int, 0); | |
| module_param(mss, int, 0); | |
| static int __init init_sscape(void) | |
| { | |
| printk(KERN_INFO "Soundscape driver Copyright (C) by Hannu Savolainen 1993-1996\n"); | |
| cfg.irq = irq; | |
| cfg.dma = dma; | |
| cfg.io_base = io; | |
| cfg_mpu.irq = mpu_irq; | |
| cfg_mpu.io_base = mpu_io; | |
| /* WEH - Try to get right dma channel */ | |
| cfg_mpu.dma = dma; | |
| devc->codec = cfg.io_base; | |
| devc->codec_irq = cfg.irq; | |
| devc->codec_type = 0; | |
| devc->ic_type = 0; | |
| devc->raw_buf = NULL; | |
| spin_lock_init(&devc->lock); | |
| if (cfg.dma == -1 || cfg.irq == -1 || cfg.io_base == -1) { | |
| printk(KERN_ERR "DMA, IRQ, and IO port must be specified.\n"); | |
| return -EINVAL; | |
| } | |
| if (cfg_mpu.irq == -1 && cfg_mpu.io_base != -1) { | |
| printk(KERN_ERR "MPU_IRQ must be specified if MPU_IO is set.\n"); | |
| return -EINVAL; | |
| } | |
| if(spea != -1) { | |
| old_hardware = spea; | |
| printk(KERN_INFO "Forcing %s hardware support.\n", | |
| spea?"new":"old"); | |
| } | |
| if (probe_sscape(&cfg_mpu) == 0) | |
| return -ENODEV; | |
| attach_sscape(&cfg_mpu); | |
| mss = init_ss_ms_sound(&cfg); | |
| return 0; | |
| } | |
| static void __exit cleanup_sscape(void) | |
| { | |
| if (mss) | |
| unload_ss_ms_sound(&cfg); | |
| unload_sscape(&cfg_mpu); | |
| } | |
| module_init(init_sscape); | |
| module_exit(cleanup_sscape); | |
| #ifndef MODULE | |
| static int __init setup_sscape(char *str) | |
| { | |
| /* io, irq, dma, mpu_io, mpu_irq */ | |
| int ints[6]; | |
| str = get_options(str, ARRAY_SIZE(ints), ints); | |
| io = ints[1]; | |
| irq = ints[2]; | |
| dma = ints[3]; | |
| mpu_io = ints[4]; | |
| mpu_irq = ints[5]; | |
| return 1; | |
| } | |
| __setup("sscape=", setup_sscape); | |
| #endif | |
| MODULE_LICENSE("GPL"); |