| /* | |
| * usbmidi.c - ALSA USB MIDI driver | |
| * | |
| * Copyright (c) 2002-2005 Clemens Ladisch | |
| * All rights reserved. | |
| * | |
| * Based on the OSS usb-midi driver by NAGANO Daisuke, | |
| * NetBSD's umidi driver by Takuya SHIOZAKI, | |
| * the "USB Device Class Definition for MIDI Devices" by Roland | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions, and the following disclaimer, | |
| * without modification. | |
| * 2. The name of the author may not be used to endorse or promote products | |
| * derived from this software without specific prior written permission. | |
| * | |
| * Alternatively, this software may be distributed and/or modified under the | |
| * terms of the GNU General Public License as published by the Free Software | |
| * Foundation; either version 2 of the License, or (at your option) any later | |
| * version. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND | |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR | |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | |
| * SUCH DAMAGE. | |
| */ | |
| #include <sound/driver.h> | |
| #include <linux/kernel.h> | |
| #include <linux/types.h> | |
| #include <linux/bitops.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/string.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/timer.h> | |
| #include <linux/usb.h> | |
| #include <sound/core.h> | |
| #include <sound/rawmidi.h> | |
| #include <sound/asequencer.h> | |
| #include "usbaudio.h" | |
| /* | |
| * define this to log all USB packets | |
| */ | |
| /* #define DUMP_PACKETS */ | |
| /* | |
| * how long to wait after some USB errors, so that khubd can disconnect() us | |
| * without too many spurious errors | |
| */ | |
| #define ERROR_DELAY_JIFFIES (HZ / 10) | |
| MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>"); | |
| MODULE_DESCRIPTION("USB Audio/MIDI helper module"); | |
| MODULE_LICENSE("Dual BSD/GPL"); | |
| struct usb_ms_header_descriptor { | |
| __u8 bLength; | |
| __u8 bDescriptorType; | |
| __u8 bDescriptorSubtype; | |
| __u8 bcdMSC[2]; | |
| __le16 wTotalLength; | |
| } __attribute__ ((packed)); | |
| struct usb_ms_endpoint_descriptor { | |
| __u8 bLength; | |
| __u8 bDescriptorType; | |
| __u8 bDescriptorSubtype; | |
| __u8 bNumEmbMIDIJack; | |
| __u8 baAssocJackID[0]; | |
| } __attribute__ ((packed)); | |
| struct snd_usb_midi_in_endpoint; | |
| struct snd_usb_midi_out_endpoint; | |
| struct snd_usb_midi_endpoint; | |
| struct usb_protocol_ops { | |
| void (*input)(struct snd_usb_midi_in_endpoint*, uint8_t*, int); | |
| void (*output)(struct snd_usb_midi_out_endpoint*); | |
| void (*output_packet)(struct urb*, uint8_t, uint8_t, uint8_t, uint8_t); | |
| void (*init_out_endpoint)(struct snd_usb_midi_out_endpoint*); | |
| void (*finish_out_endpoint)(struct snd_usb_midi_out_endpoint*); | |
| }; | |
| struct snd_usb_midi { | |
| struct snd_usb_audio *chip; | |
| struct usb_interface *iface; | |
| const struct snd_usb_audio_quirk *quirk; | |
| struct snd_rawmidi *rmidi; | |
| struct usb_protocol_ops* usb_protocol_ops; | |
| struct list_head list; | |
| struct timer_list error_timer; | |
| struct snd_usb_midi_endpoint { | |
| struct snd_usb_midi_out_endpoint *out; | |
| struct snd_usb_midi_in_endpoint *in; | |
| } endpoints[MIDI_MAX_ENDPOINTS]; | |
| unsigned long input_triggered; | |
| }; | |
| struct snd_usb_midi_out_endpoint { | |
| struct snd_usb_midi* umidi; | |
| struct urb* urb; | |
| int urb_active; | |
| int max_transfer; /* size of urb buffer */ | |
| struct tasklet_struct tasklet; | |
| spinlock_t buffer_lock; | |
| struct usbmidi_out_port { | |
| struct snd_usb_midi_out_endpoint* ep; | |
| struct snd_rawmidi_substream *substream; | |
| int active; | |
| uint8_t cable; /* cable number << 4 */ | |
| uint8_t state; | |
| #define STATE_UNKNOWN 0 | |
| #define STATE_1PARAM 1 | |
| #define STATE_2PARAM_1 2 | |
| #define STATE_2PARAM_2 3 | |
| #define STATE_SYSEX_0 4 | |
| #define STATE_SYSEX_1 5 | |
| #define STATE_SYSEX_2 6 | |
| uint8_t data[2]; | |
| } ports[0x10]; | |
| int current_port; | |
| }; | |
| struct snd_usb_midi_in_endpoint { | |
| struct snd_usb_midi* umidi; | |
| struct urb* urb; | |
| struct usbmidi_in_port { | |
| struct snd_rawmidi_substream *substream; | |
| } ports[0x10]; | |
| u8 seen_f5; | |
| u8 error_resubmit; | |
| int current_port; | |
| }; | |
| static void snd_usbmidi_do_output(struct snd_usb_midi_out_endpoint* ep); | |
| static const uint8_t snd_usbmidi_cin_length[] = { | |
| 0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1 | |
| }; | |
| /* | |
| * Submits the URB, with error handling. | |
| */ | |
| static int snd_usbmidi_submit_urb(struct urb* urb, gfp_t flags) | |
| { | |
| int err = usb_submit_urb(urb, flags); | |
| if (err < 0 && err != -ENODEV) | |
| snd_printk(KERN_ERR "usb_submit_urb: %d\n", err); | |
| return err; | |
| } | |
| /* | |
| * Error handling for URB completion functions. | |
| */ | |
| static int snd_usbmidi_urb_error(int status) | |
| { | |
| switch (status) { | |
| /* manually unlinked, or device gone */ | |
| case -ENOENT: | |
| case -ECONNRESET: | |
| case -ESHUTDOWN: | |
| case -ENODEV: | |
| return -ENODEV; | |
| /* errors that might occur during unplugging */ | |
| case -EPROTO: | |
| case -ETIME: | |
| case -EILSEQ: | |
| return -EIO; | |
| default: | |
| snd_printk(KERN_ERR "urb status %d\n", status); | |
| return 0; /* continue */ | |
| } | |
| } | |
| /* | |
| * Receives a chunk of MIDI data. | |
| */ | |
| static void snd_usbmidi_input_data(struct snd_usb_midi_in_endpoint* ep, int portidx, | |
| uint8_t* data, int length) | |
| { | |
| struct usbmidi_in_port* port = &ep->ports[portidx]; | |
| if (!port->substream) { | |
| snd_printd("unexpected port %d!\n", portidx); | |
| return; | |
| } | |
| if (!test_bit(port->substream->number, &ep->umidi->input_triggered)) | |
| return; | |
| snd_rawmidi_receive(port->substream, data, length); | |
| } | |
| #ifdef DUMP_PACKETS | |
| static void dump_urb(const char *type, const u8 *data, int length) | |
| { | |
| snd_printk(KERN_DEBUG "%s packet: [", type); | |
| for (; length > 0; ++data, --length) | |
| printk(" %02x", *data); | |
| printk(" ]\n"); | |
| } | |
| #else | |
| #define dump_urb(type, data, length) /* nothing */ | |
| #endif | |
| /* | |
| * Processes the data read from the device. | |
| */ | |
| static void snd_usbmidi_in_urb_complete(struct urb* urb) | |
| { | |
| struct snd_usb_midi_in_endpoint* ep = urb->context; | |
| if (urb->status == 0) { | |
| dump_urb("received", urb->transfer_buffer, urb->actual_length); | |
| ep->umidi->usb_protocol_ops->input(ep, urb->transfer_buffer, | |
| urb->actual_length); | |
| } else { | |
| int err = snd_usbmidi_urb_error(urb->status); | |
| if (err < 0) { | |
| if (err != -ENODEV) { | |
| ep->error_resubmit = 1; | |
| mod_timer(&ep->umidi->error_timer, | |
| jiffies + ERROR_DELAY_JIFFIES); | |
| } | |
| return; | |
| } | |
| } | |
| urb->dev = ep->umidi->chip->dev; | |
| snd_usbmidi_submit_urb(urb, GFP_ATOMIC); | |
| } | |
| static void snd_usbmidi_out_urb_complete(struct urb* urb) | |
| { | |
| struct snd_usb_midi_out_endpoint* ep = urb->context; | |
| spin_lock(&ep->buffer_lock); | |
| ep->urb_active = 0; | |
| spin_unlock(&ep->buffer_lock); | |
| if (urb->status < 0) { | |
| int err = snd_usbmidi_urb_error(urb->status); | |
| if (err < 0) { | |
| if (err != -ENODEV) | |
| mod_timer(&ep->umidi->error_timer, | |
| jiffies + ERROR_DELAY_JIFFIES); | |
| return; | |
| } | |
| } | |
| snd_usbmidi_do_output(ep); | |
| } | |
| /* | |
| * This is called when some data should be transferred to the device | |
| * (from one or more substreams). | |
| */ | |
| static void snd_usbmidi_do_output(struct snd_usb_midi_out_endpoint* ep) | |
| { | |
| struct urb* urb = ep->urb; | |
| unsigned long flags; | |
| spin_lock_irqsave(&ep->buffer_lock, flags); | |
| if (ep->urb_active || ep->umidi->chip->shutdown) { | |
| spin_unlock_irqrestore(&ep->buffer_lock, flags); | |
| return; | |
| } | |
| urb->transfer_buffer_length = 0; | |
| ep->umidi->usb_protocol_ops->output(ep); | |
| if (urb->transfer_buffer_length > 0) { | |
| dump_urb("sending", urb->transfer_buffer, | |
| urb->transfer_buffer_length); | |
| urb->dev = ep->umidi->chip->dev; | |
| ep->urb_active = snd_usbmidi_submit_urb(urb, GFP_ATOMIC) >= 0; | |
| } | |
| spin_unlock_irqrestore(&ep->buffer_lock, flags); | |
| } | |
| static void snd_usbmidi_out_tasklet(unsigned long data) | |
| { | |
| struct snd_usb_midi_out_endpoint* ep = (struct snd_usb_midi_out_endpoint *) data; | |
| snd_usbmidi_do_output(ep); | |
| } | |
| /* called after transfers had been interrupted due to some USB error */ | |
| static void snd_usbmidi_error_timer(unsigned long data) | |
| { | |
| struct snd_usb_midi *umidi = (struct snd_usb_midi *)data; | |
| int i; | |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { | |
| struct snd_usb_midi_in_endpoint *in = umidi->endpoints[i].in; | |
| if (in && in->error_resubmit) { | |
| in->error_resubmit = 0; | |
| in->urb->dev = umidi->chip->dev; | |
| snd_usbmidi_submit_urb(in->urb, GFP_ATOMIC); | |
| } | |
| if (umidi->endpoints[i].out) | |
| snd_usbmidi_do_output(umidi->endpoints[i].out); | |
| } | |
| } | |
| /* helper function to send static data that may not DMA-able */ | |
| static int send_bulk_static_data(struct snd_usb_midi_out_endpoint* ep, | |
| const void *data, int len) | |
| { | |
| int err; | |
| void *buf = kmemdup(data, len, GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| dump_urb("sending", buf, len); | |
| err = usb_bulk_msg(ep->umidi->chip->dev, ep->urb->pipe, buf, len, | |
| NULL, 250); | |
| kfree(buf); | |
| return err; | |
| } | |
| /* | |
| * Standard USB MIDI protocol: see the spec. | |
| * Midiman protocol: like the standard protocol, but the control byte is the | |
| * fourth byte in each packet, and uses length instead of CIN. | |
| */ | |
| static void snd_usbmidi_standard_input(struct snd_usb_midi_in_endpoint* ep, | |
| uint8_t* buffer, int buffer_length) | |
| { | |
| int i; | |
| for (i = 0; i + 3 < buffer_length; i += 4) | |
| if (buffer[i] != 0) { | |
| int cable = buffer[i] >> 4; | |
| int length = snd_usbmidi_cin_length[buffer[i] & 0x0f]; | |
| snd_usbmidi_input_data(ep, cable, &buffer[i + 1], length); | |
| } | |
| } | |
| static void snd_usbmidi_midiman_input(struct snd_usb_midi_in_endpoint* ep, | |
| uint8_t* buffer, int buffer_length) | |
| { | |
| int i; | |
| for (i = 0; i + 3 < buffer_length; i += 4) | |
| if (buffer[i + 3] != 0) { | |
| int port = buffer[i + 3] >> 4; | |
| int length = buffer[i + 3] & 3; | |
| snd_usbmidi_input_data(ep, port, &buffer[i], length); | |
| } | |
| } | |
| /* | |
| * Adds one USB MIDI packet to the output buffer. | |
| */ | |
| static void snd_usbmidi_output_standard_packet(struct urb* urb, uint8_t p0, | |
| uint8_t p1, uint8_t p2, uint8_t p3) | |
| { | |
| uint8_t* buf = (uint8_t*)urb->transfer_buffer + urb->transfer_buffer_length; | |
| buf[0] = p0; | |
| buf[1] = p1; | |
| buf[2] = p2; | |
| buf[3] = p3; | |
| urb->transfer_buffer_length += 4; | |
| } | |
| /* | |
| * Adds one Midiman packet to the output buffer. | |
| */ | |
| static void snd_usbmidi_output_midiman_packet(struct urb* urb, uint8_t p0, | |
| uint8_t p1, uint8_t p2, uint8_t p3) | |
| { | |
| uint8_t* buf = (uint8_t*)urb->transfer_buffer + urb->transfer_buffer_length; | |
| buf[0] = p1; | |
| buf[1] = p2; | |
| buf[2] = p3; | |
| buf[3] = (p0 & 0xf0) | snd_usbmidi_cin_length[p0 & 0x0f]; | |
| urb->transfer_buffer_length += 4; | |
| } | |
| /* | |
| * Converts MIDI commands to USB MIDI packets. | |
| */ | |
| static void snd_usbmidi_transmit_byte(struct usbmidi_out_port* port, | |
| uint8_t b, struct urb* urb) | |
| { | |
| uint8_t p0 = port->cable; | |
| void (*output_packet)(struct urb*, uint8_t, uint8_t, uint8_t, uint8_t) = | |
| port->ep->umidi->usb_protocol_ops->output_packet; | |
| if (b >= 0xf8) { | |
| output_packet(urb, p0 | 0x0f, b, 0, 0); | |
| } else if (b >= 0xf0) { | |
| switch (b) { | |
| case 0xf0: | |
| port->data[0] = b; | |
| port->state = STATE_SYSEX_1; | |
| break; | |
| case 0xf1: | |
| case 0xf3: | |
| port->data[0] = b; | |
| port->state = STATE_1PARAM; | |
| break; | |
| case 0xf2: | |
| port->data[0] = b; | |
| port->state = STATE_2PARAM_1; | |
| break; | |
| case 0xf4: | |
| case 0xf5: | |
| port->state = STATE_UNKNOWN; | |
| break; | |
| case 0xf6: | |
| output_packet(urb, p0 | 0x05, 0xf6, 0, 0); | |
| port->state = STATE_UNKNOWN; | |
| break; | |
| case 0xf7: | |
| switch (port->state) { | |
| case STATE_SYSEX_0: | |
| output_packet(urb, p0 | 0x05, 0xf7, 0, 0); | |
| break; | |
| case STATE_SYSEX_1: | |
| output_packet(urb, p0 | 0x06, port->data[0], 0xf7, 0); | |
| break; | |
| case STATE_SYSEX_2: | |
| output_packet(urb, p0 | 0x07, port->data[0], port->data[1], 0xf7); | |
| break; | |
| } | |
| port->state = STATE_UNKNOWN; | |
| break; | |
| } | |
| } else if (b >= 0x80) { | |
| port->data[0] = b; | |
| if (b >= 0xc0 && b <= 0xdf) | |
| port->state = STATE_1PARAM; | |
| else | |
| port->state = STATE_2PARAM_1; | |
| } else { /* b < 0x80 */ | |
| switch (port->state) { | |
| case STATE_1PARAM: | |
| if (port->data[0] < 0xf0) { | |
| p0 |= port->data[0] >> 4; | |
| } else { | |
| p0 |= 0x02; | |
| port->state = STATE_UNKNOWN; | |
| } | |
| output_packet(urb, p0, port->data[0], b, 0); | |
| break; | |
| case STATE_2PARAM_1: | |
| port->data[1] = b; | |
| port->state = STATE_2PARAM_2; | |
| break; | |
| case STATE_2PARAM_2: | |
| if (port->data[0] < 0xf0) { | |
| p0 |= port->data[0] >> 4; | |
| port->state = STATE_2PARAM_1; | |
| } else { | |
| p0 |= 0x03; | |
| port->state = STATE_UNKNOWN; | |
| } | |
| output_packet(urb, p0, port->data[0], port->data[1], b); | |
| break; | |
| case STATE_SYSEX_0: | |
| port->data[0] = b; | |
| port->state = STATE_SYSEX_1; | |
| break; | |
| case STATE_SYSEX_1: | |
| port->data[1] = b; | |
| port->state = STATE_SYSEX_2; | |
| break; | |
| case STATE_SYSEX_2: | |
| output_packet(urb, p0 | 0x04, port->data[0], port->data[1], b); | |
| port->state = STATE_SYSEX_0; | |
| break; | |
| } | |
| } | |
| } | |
| static void snd_usbmidi_standard_output(struct snd_usb_midi_out_endpoint* ep) | |
| { | |
| struct urb* urb = ep->urb; | |
| int p; | |
| /* FIXME: lower-numbered ports can starve higher-numbered ports */ | |
| for (p = 0; p < 0x10; ++p) { | |
| struct usbmidi_out_port* port = &ep->ports[p]; | |
| if (!port->active) | |
| continue; | |
| while (urb->transfer_buffer_length + 3 < ep->max_transfer) { | |
| uint8_t b; | |
| if (snd_rawmidi_transmit(port->substream, &b, 1) != 1) { | |
| port->active = 0; | |
| break; | |
| } | |
| snd_usbmidi_transmit_byte(port, b, urb); | |
| } | |
| } | |
| } | |
| static struct usb_protocol_ops snd_usbmidi_standard_ops = { | |
| .input = snd_usbmidi_standard_input, | |
| .output = snd_usbmidi_standard_output, | |
| .output_packet = snd_usbmidi_output_standard_packet, | |
| }; | |
| static struct usb_protocol_ops snd_usbmidi_midiman_ops = { | |
| .input = snd_usbmidi_midiman_input, | |
| .output = snd_usbmidi_standard_output, | |
| .output_packet = snd_usbmidi_output_midiman_packet, | |
| }; | |
| /* | |
| * Novation USB MIDI protocol: number of data bytes is in the first byte | |
| * (when receiving) (+1!) or in the second byte (when sending); data begins | |
| * at the third byte. | |
| */ | |
| static void snd_usbmidi_novation_input(struct snd_usb_midi_in_endpoint* ep, | |
| uint8_t* buffer, int buffer_length) | |
| { | |
| if (buffer_length < 2 || !buffer[0] || buffer_length < buffer[0] + 1) | |
| return; | |
| snd_usbmidi_input_data(ep, 0, &buffer[2], buffer[0] - 1); | |
| } | |
| static void snd_usbmidi_novation_output(struct snd_usb_midi_out_endpoint* ep) | |
| { | |
| uint8_t* transfer_buffer; | |
| int count; | |
| if (!ep->ports[0].active) | |
| return; | |
| transfer_buffer = ep->urb->transfer_buffer; | |
| count = snd_rawmidi_transmit(ep->ports[0].substream, | |
| &transfer_buffer[2], | |
| ep->max_transfer - 2); | |
| if (count < 1) { | |
| ep->ports[0].active = 0; | |
| return; | |
| } | |
| transfer_buffer[0] = 0; | |
| transfer_buffer[1] = count; | |
| ep->urb->transfer_buffer_length = 2 + count; | |
| } | |
| static struct usb_protocol_ops snd_usbmidi_novation_ops = { | |
| .input = snd_usbmidi_novation_input, | |
| .output = snd_usbmidi_novation_output, | |
| }; | |
| /* | |
| * "raw" protocol: used by the MOTU FastLane. | |
| */ | |
| static void snd_usbmidi_raw_input(struct snd_usb_midi_in_endpoint* ep, | |
| uint8_t* buffer, int buffer_length) | |
| { | |
| snd_usbmidi_input_data(ep, 0, buffer, buffer_length); | |
| } | |
| static void snd_usbmidi_raw_output(struct snd_usb_midi_out_endpoint* ep) | |
| { | |
| int count; | |
| if (!ep->ports[0].active) | |
| return; | |
| count = snd_rawmidi_transmit(ep->ports[0].substream, | |
| ep->urb->transfer_buffer, | |
| ep->max_transfer); | |
| if (count < 1) { | |
| ep->ports[0].active = 0; | |
| return; | |
| } | |
| ep->urb->transfer_buffer_length = count; | |
| } | |
| static struct usb_protocol_ops snd_usbmidi_raw_ops = { | |
| .input = snd_usbmidi_raw_input, | |
| .output = snd_usbmidi_raw_output, | |
| }; | |
| /* | |
| * Emagic USB MIDI protocol: raw MIDI with "F5 xx" port switching. | |
| */ | |
| static void snd_usbmidi_emagic_init_out(struct snd_usb_midi_out_endpoint* ep) | |
| { | |
| static const u8 init_data[] = { | |
| /* initialization magic: "get version" */ | |
| 0xf0, | |
| 0x00, 0x20, 0x31, /* Emagic */ | |
| 0x64, /* Unitor8 */ | |
| 0x0b, /* version number request */ | |
| 0x00, /* command version */ | |
| 0x00, /* EEPROM, box 0 */ | |
| 0xf7 | |
| }; | |
| send_bulk_static_data(ep, init_data, sizeof(init_data)); | |
| /* while we're at it, pour on more magic */ | |
| send_bulk_static_data(ep, init_data, sizeof(init_data)); | |
| } | |
| static void snd_usbmidi_emagic_finish_out(struct snd_usb_midi_out_endpoint* ep) | |
| { | |
| static const u8 finish_data[] = { | |
| /* switch to patch mode with last preset */ | |
| 0xf0, | |
| 0x00, 0x20, 0x31, /* Emagic */ | |
| 0x64, /* Unitor8 */ | |
| 0x10, /* patch switch command */ | |
| 0x00, /* command version */ | |
| 0x7f, /* to all boxes */ | |
| 0x40, /* last preset in EEPROM */ | |
| 0xf7 | |
| }; | |
| send_bulk_static_data(ep, finish_data, sizeof(finish_data)); | |
| } | |
| static void snd_usbmidi_emagic_input(struct snd_usb_midi_in_endpoint* ep, | |
| uint8_t* buffer, int buffer_length) | |
| { | |
| int i; | |
| /* FF indicates end of valid data */ | |
| for (i = 0; i < buffer_length; ++i) | |
| if (buffer[i] == 0xff) { | |
| buffer_length = i; | |
| break; | |
| } | |
| /* handle F5 at end of last buffer */ | |
| if (ep->seen_f5) | |
| goto switch_port; | |
| while (buffer_length > 0) { | |
| /* determine size of data until next F5 */ | |
| for (i = 0; i < buffer_length; ++i) | |
| if (buffer[i] == 0xf5) | |
| break; | |
| snd_usbmidi_input_data(ep, ep->current_port, buffer, i); | |
| buffer += i; | |
| buffer_length -= i; | |
| if (buffer_length <= 0) | |
| break; | |
| /* assert(buffer[0] == 0xf5); */ | |
| ep->seen_f5 = 1; | |
| ++buffer; | |
| --buffer_length; | |
| switch_port: | |
| if (buffer_length <= 0) | |
| break; | |
| if (buffer[0] < 0x80) { | |
| ep->current_port = (buffer[0] - 1) & 15; | |
| ++buffer; | |
| --buffer_length; | |
| } | |
| ep->seen_f5 = 0; | |
| } | |
| } | |
| static void snd_usbmidi_emagic_output(struct snd_usb_midi_out_endpoint* ep) | |
| { | |
| int port0 = ep->current_port; | |
| uint8_t* buf = ep->urb->transfer_buffer; | |
| int buf_free = ep->max_transfer; | |
| int length, i; | |
| for (i = 0; i < 0x10; ++i) { | |
| /* round-robin, starting at the last current port */ | |
| int portnum = (port0 + i) & 15; | |
| struct usbmidi_out_port* port = &ep->ports[portnum]; | |
| if (!port->active) | |
| continue; | |
| if (snd_rawmidi_transmit_peek(port->substream, buf, 1) != 1) { | |
| port->active = 0; | |
| continue; | |
| } | |
| if (portnum != ep->current_port) { | |
| if (buf_free < 2) | |
| break; | |
| ep->current_port = portnum; | |
| buf[0] = 0xf5; | |
| buf[1] = (portnum + 1) & 15; | |
| buf += 2; | |
| buf_free -= 2; | |
| } | |
| if (buf_free < 1) | |
| break; | |
| length = snd_rawmidi_transmit(port->substream, buf, buf_free); | |
| if (length > 0) { | |
| buf += length; | |
| buf_free -= length; | |
| if (buf_free < 1) | |
| break; | |
| } | |
| } | |
| if (buf_free < ep->max_transfer && buf_free > 0) { | |
| *buf = 0xff; | |
| --buf_free; | |
| } | |
| ep->urb->transfer_buffer_length = ep->max_transfer - buf_free; | |
| } | |
| static struct usb_protocol_ops snd_usbmidi_emagic_ops = { | |
| .input = snd_usbmidi_emagic_input, | |
| .output = snd_usbmidi_emagic_output, | |
| .init_out_endpoint = snd_usbmidi_emagic_init_out, | |
| .finish_out_endpoint = snd_usbmidi_emagic_finish_out, | |
| }; | |
| static int snd_usbmidi_output_open(struct snd_rawmidi_substream *substream) | |
| { | |
| struct snd_usb_midi* umidi = substream->rmidi->private_data; | |
| struct usbmidi_out_port* port = NULL; | |
| int i, j; | |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) | |
| if (umidi->endpoints[i].out) | |
| for (j = 0; j < 0x10; ++j) | |
| if (umidi->endpoints[i].out->ports[j].substream == substream) { | |
| port = &umidi->endpoints[i].out->ports[j]; | |
| break; | |
| } | |
| if (!port) { | |
| snd_BUG(); | |
| return -ENXIO; | |
| } | |
| substream->runtime->private_data = port; | |
| port->state = STATE_UNKNOWN; | |
| return 0; | |
| } | |
| static int snd_usbmidi_output_close(struct snd_rawmidi_substream *substream) | |
| { | |
| return 0; | |
| } | |
| static void snd_usbmidi_output_trigger(struct snd_rawmidi_substream *substream, int up) | |
| { | |
| struct usbmidi_out_port* port = (struct usbmidi_out_port*)substream->runtime->private_data; | |
| port->active = up; | |
| if (up) { | |
| if (port->ep->umidi->chip->shutdown) { | |
| /* gobble up remaining bytes to prevent wait in | |
| * snd_rawmidi_drain_output */ | |
| while (!snd_rawmidi_transmit_empty(substream)) | |
| snd_rawmidi_transmit_ack(substream, 1); | |
| return; | |
| } | |
| tasklet_hi_schedule(&port->ep->tasklet); | |
| } | |
| } | |
| static int snd_usbmidi_input_open(struct snd_rawmidi_substream *substream) | |
| { | |
| return 0; | |
| } | |
| static int snd_usbmidi_input_close(struct snd_rawmidi_substream *substream) | |
| { | |
| return 0; | |
| } | |
| static void snd_usbmidi_input_trigger(struct snd_rawmidi_substream *substream, int up) | |
| { | |
| struct snd_usb_midi* umidi = substream->rmidi->private_data; | |
| if (up) | |
| set_bit(substream->number, &umidi->input_triggered); | |
| else | |
| clear_bit(substream->number, &umidi->input_triggered); | |
| } | |
| static struct snd_rawmidi_ops snd_usbmidi_output_ops = { | |
| .open = snd_usbmidi_output_open, | |
| .close = snd_usbmidi_output_close, | |
| .trigger = snd_usbmidi_output_trigger, | |
| }; | |
| static struct snd_rawmidi_ops snd_usbmidi_input_ops = { | |
| .open = snd_usbmidi_input_open, | |
| .close = snd_usbmidi_input_close, | |
| .trigger = snd_usbmidi_input_trigger | |
| }; | |
| /* | |
| * Frees an input endpoint. | |
| * May be called when ep hasn't been initialized completely. | |
| */ | |
| static void snd_usbmidi_in_endpoint_delete(struct snd_usb_midi_in_endpoint* ep) | |
| { | |
| if (ep->urb) { | |
| usb_buffer_free(ep->umidi->chip->dev, | |
| ep->urb->transfer_buffer_length, | |
| ep->urb->transfer_buffer, | |
| ep->urb->transfer_dma); | |
| usb_free_urb(ep->urb); | |
| } | |
| kfree(ep); | |
| } | |
| /* | |
| * Creates an input endpoint. | |
| */ | |
| static int snd_usbmidi_in_endpoint_create(struct snd_usb_midi* umidi, | |
| struct snd_usb_midi_endpoint_info* ep_info, | |
| struct snd_usb_midi_endpoint* rep) | |
| { | |
| struct snd_usb_midi_in_endpoint* ep; | |
| void* buffer; | |
| unsigned int pipe; | |
| int length; | |
| rep->in = NULL; | |
| ep = kzalloc(sizeof(*ep), GFP_KERNEL); | |
| if (!ep) | |
| return -ENOMEM; | |
| ep->umidi = umidi; | |
| ep->urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!ep->urb) { | |
| snd_usbmidi_in_endpoint_delete(ep); | |
| return -ENOMEM; | |
| } | |
| if (ep_info->in_interval) | |
| pipe = usb_rcvintpipe(umidi->chip->dev, ep_info->in_ep); | |
| else | |
| pipe = usb_rcvbulkpipe(umidi->chip->dev, ep_info->in_ep); | |
| length = usb_maxpacket(umidi->chip->dev, pipe, 0); | |
| buffer = usb_buffer_alloc(umidi->chip->dev, length, GFP_KERNEL, | |
| &ep->urb->transfer_dma); | |
| if (!buffer) { | |
| snd_usbmidi_in_endpoint_delete(ep); | |
| return -ENOMEM; | |
| } | |
| if (ep_info->in_interval) | |
| usb_fill_int_urb(ep->urb, umidi->chip->dev, pipe, buffer, | |
| length, snd_usbmidi_in_urb_complete, ep, | |
| ep_info->in_interval); | |
| else | |
| usb_fill_bulk_urb(ep->urb, umidi->chip->dev, pipe, buffer, | |
| length, snd_usbmidi_in_urb_complete, ep); | |
| ep->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; | |
| rep->in = ep; | |
| return 0; | |
| } | |
| static unsigned int snd_usbmidi_count_bits(unsigned int x) | |
| { | |
| unsigned int bits; | |
| for (bits = 0; x; ++bits) | |
| x &= x - 1; | |
| return bits; | |
| } | |
| /* | |
| * Frees an output endpoint. | |
| * May be called when ep hasn't been initialized completely. | |
| */ | |
| static void snd_usbmidi_out_endpoint_delete(struct snd_usb_midi_out_endpoint* ep) | |
| { | |
| if (ep->urb) { | |
| usb_buffer_free(ep->umidi->chip->dev, ep->max_transfer, | |
| ep->urb->transfer_buffer, | |
| ep->urb->transfer_dma); | |
| usb_free_urb(ep->urb); | |
| } | |
| kfree(ep); | |
| } | |
| /* | |
| * Creates an output endpoint, and initializes output ports. | |
| */ | |
| static int snd_usbmidi_out_endpoint_create(struct snd_usb_midi* umidi, | |
| struct snd_usb_midi_endpoint_info* ep_info, | |
| struct snd_usb_midi_endpoint* rep) | |
| { | |
| struct snd_usb_midi_out_endpoint* ep; | |
| int i; | |
| unsigned int pipe; | |
| void* buffer; | |
| rep->out = NULL; | |
| ep = kzalloc(sizeof(*ep), GFP_KERNEL); | |
| if (!ep) | |
| return -ENOMEM; | |
| ep->umidi = umidi; | |
| ep->urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!ep->urb) { | |
| snd_usbmidi_out_endpoint_delete(ep); | |
| return -ENOMEM; | |
| } | |
| /* we never use interrupt output pipes */ | |
| pipe = usb_sndbulkpipe(umidi->chip->dev, ep_info->out_ep); | |
| ep->max_transfer = usb_maxpacket(umidi->chip->dev, pipe, 1); | |
| buffer = usb_buffer_alloc(umidi->chip->dev, ep->max_transfer, | |
| GFP_KERNEL, &ep->urb->transfer_dma); | |
| if (!buffer) { | |
| snd_usbmidi_out_endpoint_delete(ep); | |
| return -ENOMEM; | |
| } | |
| usb_fill_bulk_urb(ep->urb, umidi->chip->dev, pipe, buffer, | |
| ep->max_transfer, snd_usbmidi_out_urb_complete, ep); | |
| ep->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; | |
| spin_lock_init(&ep->buffer_lock); | |
| tasklet_init(&ep->tasklet, snd_usbmidi_out_tasklet, (unsigned long)ep); | |
| for (i = 0; i < 0x10; ++i) | |
| if (ep_info->out_cables & (1 << i)) { | |
| ep->ports[i].ep = ep; | |
| ep->ports[i].cable = i << 4; | |
| } | |
| if (umidi->usb_protocol_ops->init_out_endpoint) | |
| umidi->usb_protocol_ops->init_out_endpoint(ep); | |
| rep->out = ep; | |
| return 0; | |
| } | |
| /* | |
| * Frees everything. | |
| */ | |
| static void snd_usbmidi_free(struct snd_usb_midi* umidi) | |
| { | |
| int i; | |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { | |
| struct snd_usb_midi_endpoint* ep = &umidi->endpoints[i]; | |
| if (ep->out) | |
| snd_usbmidi_out_endpoint_delete(ep->out); | |
| if (ep->in) | |
| snd_usbmidi_in_endpoint_delete(ep->in); | |
| } | |
| kfree(umidi); | |
| } | |
| /* | |
| * Unlinks all URBs (must be done before the usb_device is deleted). | |
| */ | |
| void snd_usbmidi_disconnect(struct list_head* p) | |
| { | |
| struct snd_usb_midi* umidi; | |
| int i; | |
| umidi = list_entry(p, struct snd_usb_midi, list); | |
| del_timer_sync(&umidi->error_timer); | |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { | |
| struct snd_usb_midi_endpoint* ep = &umidi->endpoints[i]; | |
| if (ep->out) | |
| tasklet_kill(&ep->out->tasklet); | |
| if (ep->out && ep->out->urb) { | |
| usb_kill_urb(ep->out->urb); | |
| if (umidi->usb_protocol_ops->finish_out_endpoint) | |
| umidi->usb_protocol_ops->finish_out_endpoint(ep->out); | |
| } | |
| if (ep->in && ep->in->urb) | |
| usb_kill_urb(ep->in->urb); | |
| } | |
| } | |
| static void snd_usbmidi_rawmidi_free(struct snd_rawmidi *rmidi) | |
| { | |
| struct snd_usb_midi* umidi = rmidi->private_data; | |
| snd_usbmidi_free(umidi); | |
| } | |
| static struct snd_rawmidi_substream *snd_usbmidi_find_substream(struct snd_usb_midi* umidi, | |
| int stream, int number) | |
| { | |
| struct list_head* list; | |
| list_for_each(list, &umidi->rmidi->streams[stream].substreams) { | |
| struct snd_rawmidi_substream *substream = list_entry(list, struct snd_rawmidi_substream, list); | |
| if (substream->number == number) | |
| return substream; | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * This list specifies names for ports that do not fit into the standard | |
| * "(product) MIDI (n)" schema because they aren't external MIDI ports, | |
| * such as internal control or synthesizer ports. | |
| */ | |
| static struct port_info { | |
| u32 id; | |
| short int port; | |
| short int voices; | |
| const char *name; | |
| unsigned int seq_flags; | |
| } snd_usbmidi_port_info[] = { | |
| #define PORT_INFO(vendor, product, num, name_, voices_, flags) \ | |
| { .id = USB_ID(vendor, product), \ | |
| .port = num, .voices = voices_, \ | |
| .name = name_, .seq_flags = flags } | |
| #define EXTERNAL_PORT(vendor, product, num, name) \ | |
| PORT_INFO(vendor, product, num, name, 0, \ | |
| SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \ | |
| SNDRV_SEQ_PORT_TYPE_HARDWARE | \ | |
| SNDRV_SEQ_PORT_TYPE_PORT) | |
| #define CONTROL_PORT(vendor, product, num, name) \ | |
| PORT_INFO(vendor, product, num, name, 0, \ | |
| SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \ | |
| SNDRV_SEQ_PORT_TYPE_HARDWARE) | |
| #define ROLAND_SYNTH_PORT(vendor, product, num, name, voices) \ | |
| PORT_INFO(vendor, product, num, name, voices, \ | |
| SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \ | |
| SNDRV_SEQ_PORT_TYPE_MIDI_GM | \ | |
| SNDRV_SEQ_PORT_TYPE_MIDI_GM2 | \ | |
| SNDRV_SEQ_PORT_TYPE_MIDI_GS | \ | |
| SNDRV_SEQ_PORT_TYPE_MIDI_XG | \ | |
| SNDRV_SEQ_PORT_TYPE_HARDWARE | \ | |
| SNDRV_SEQ_PORT_TYPE_SYNTHESIZER) | |
| #define SOUNDCANVAS_PORT(vendor, product, num, name, voices) \ | |
| PORT_INFO(vendor, product, num, name, voices, \ | |
| SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | \ | |
| SNDRV_SEQ_PORT_TYPE_MIDI_GM | \ | |
| SNDRV_SEQ_PORT_TYPE_MIDI_GM2 | \ | |
| SNDRV_SEQ_PORT_TYPE_MIDI_GS | \ | |
| SNDRV_SEQ_PORT_TYPE_MIDI_XG | \ | |
| SNDRV_SEQ_PORT_TYPE_MIDI_MT32 | \ | |
| SNDRV_SEQ_PORT_TYPE_HARDWARE | \ | |
| SNDRV_SEQ_PORT_TYPE_SYNTHESIZER) | |
| /* Roland UA-100 */ | |
| CONTROL_PORT(0x0582, 0x0000, 2, "%s Control"), | |
| /* Roland SC-8850 */ | |
| SOUNDCANVAS_PORT(0x0582, 0x0003, 0, "%s Part A", 128), | |
| SOUNDCANVAS_PORT(0x0582, 0x0003, 1, "%s Part B", 128), | |
| SOUNDCANVAS_PORT(0x0582, 0x0003, 2, "%s Part C", 128), | |
| SOUNDCANVAS_PORT(0x0582, 0x0003, 3, "%s Part D", 128), | |
| EXTERNAL_PORT(0x0582, 0x0003, 4, "%s MIDI 1"), | |
| EXTERNAL_PORT(0x0582, 0x0003, 5, "%s MIDI 2"), | |
| /* Roland U-8 */ | |
| EXTERNAL_PORT(0x0582, 0x0004, 0, "%s MIDI"), | |
| CONTROL_PORT(0x0582, 0x0004, 1, "%s Control"), | |
| /* Roland SC-8820 */ | |
| SOUNDCANVAS_PORT(0x0582, 0x0007, 0, "%s Part A", 64), | |
| SOUNDCANVAS_PORT(0x0582, 0x0007, 1, "%s Part B", 64), | |
| EXTERNAL_PORT(0x0582, 0x0007, 2, "%s MIDI"), | |
| /* Roland SK-500 */ | |
| SOUNDCANVAS_PORT(0x0582, 0x000b, 0, "%s Part A", 64), | |
| SOUNDCANVAS_PORT(0x0582, 0x000b, 1, "%s Part B", 64), | |
| EXTERNAL_PORT(0x0582, 0x000b, 2, "%s MIDI"), | |
| /* Roland SC-D70 */ | |
| SOUNDCANVAS_PORT(0x0582, 0x000c, 0, "%s Part A", 64), | |
| SOUNDCANVAS_PORT(0x0582, 0x000c, 1, "%s Part B", 64), | |
| EXTERNAL_PORT(0x0582, 0x000c, 2, "%s MIDI"), | |
| /* Edirol UM-880 */ | |
| CONTROL_PORT(0x0582, 0x0014, 8, "%s Control"), | |
| /* Edirol SD-90 */ | |
| ROLAND_SYNTH_PORT(0x0582, 0x0016, 0, "%s Part A", 128), | |
| ROLAND_SYNTH_PORT(0x0582, 0x0016, 1, "%s Part B", 128), | |
| EXTERNAL_PORT(0x0582, 0x0016, 2, "%s MIDI 1"), | |
| EXTERNAL_PORT(0x0582, 0x0016, 3, "%s MIDI 2"), | |
| /* Edirol UM-550 */ | |
| CONTROL_PORT(0x0582, 0x0023, 5, "%s Control"), | |
| /* Edirol SD-20 */ | |
| ROLAND_SYNTH_PORT(0x0582, 0x0027, 0, "%s Part A", 64), | |
| ROLAND_SYNTH_PORT(0x0582, 0x0027, 1, "%s Part B", 64), | |
| EXTERNAL_PORT(0x0582, 0x0027, 2, "%s MIDI"), | |
| /* Edirol SD-80 */ | |
| ROLAND_SYNTH_PORT(0x0582, 0x0029, 0, "%s Part A", 128), | |
| ROLAND_SYNTH_PORT(0x0582, 0x0029, 1, "%s Part B", 128), | |
| EXTERNAL_PORT(0x0582, 0x0029, 2, "%s MIDI 1"), | |
| EXTERNAL_PORT(0x0582, 0x0029, 3, "%s MIDI 2"), | |
| /* Edirol UA-700 */ | |
| EXTERNAL_PORT(0x0582, 0x002b, 0, "%s MIDI"), | |
| CONTROL_PORT(0x0582, 0x002b, 1, "%s Control"), | |
| /* Roland VariOS */ | |
| EXTERNAL_PORT(0x0582, 0x002f, 0, "%s MIDI"), | |
| EXTERNAL_PORT(0x0582, 0x002f, 1, "%s External MIDI"), | |
| EXTERNAL_PORT(0x0582, 0x002f, 2, "%s Sync"), | |
| /* Edirol PCR */ | |
| EXTERNAL_PORT(0x0582, 0x0033, 0, "%s MIDI"), | |
| EXTERNAL_PORT(0x0582, 0x0033, 1, "%s 1"), | |
| EXTERNAL_PORT(0x0582, 0x0033, 2, "%s 2"), | |
| /* BOSS GS-10 */ | |
| EXTERNAL_PORT(0x0582, 0x003b, 0, "%s MIDI"), | |
| CONTROL_PORT(0x0582, 0x003b, 1, "%s Control"), | |
| /* Edirol UA-1000 */ | |
| EXTERNAL_PORT(0x0582, 0x0044, 0, "%s MIDI"), | |
| CONTROL_PORT(0x0582, 0x0044, 1, "%s Control"), | |
| /* Edirol UR-80 */ | |
| EXTERNAL_PORT(0x0582, 0x0048, 0, "%s MIDI"), | |
| EXTERNAL_PORT(0x0582, 0x0048, 1, "%s 1"), | |
| EXTERNAL_PORT(0x0582, 0x0048, 2, "%s 2"), | |
| /* Edirol PCR-A */ | |
| EXTERNAL_PORT(0x0582, 0x004d, 0, "%s MIDI"), | |
| EXTERNAL_PORT(0x0582, 0x004d, 1, "%s 1"), | |
| EXTERNAL_PORT(0x0582, 0x004d, 2, "%s 2"), | |
| /* Edirol UM-3EX */ | |
| CONTROL_PORT(0x0582, 0x009a, 3, "%s Control"), | |
| /* M-Audio MidiSport 8x8 */ | |
| CONTROL_PORT(0x0763, 0x1031, 8, "%s Control"), | |
| CONTROL_PORT(0x0763, 0x1033, 8, "%s Control"), | |
| /* MOTU Fastlane */ | |
| EXTERNAL_PORT(0x07fd, 0x0001, 0, "%s MIDI A"), | |
| EXTERNAL_PORT(0x07fd, 0x0001, 1, "%s MIDI B"), | |
| /* Emagic Unitor8/AMT8/MT4 */ | |
| EXTERNAL_PORT(0x086a, 0x0001, 8, "%s Broadcast"), | |
| EXTERNAL_PORT(0x086a, 0x0002, 8, "%s Broadcast"), | |
| EXTERNAL_PORT(0x086a, 0x0003, 4, "%s Broadcast"), | |
| }; | |
| static struct port_info *find_port_info(struct snd_usb_midi* umidi, int number) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(snd_usbmidi_port_info); ++i) { | |
| if (snd_usbmidi_port_info[i].id == umidi->chip->usb_id && | |
| snd_usbmidi_port_info[i].port == number) | |
| return &snd_usbmidi_port_info[i]; | |
| } | |
| return NULL; | |
| } | |
| static void snd_usbmidi_get_port_info(struct snd_rawmidi *rmidi, int number, | |
| struct snd_seq_port_info *seq_port_info) | |
| { | |
| struct snd_usb_midi *umidi = rmidi->private_data; | |
| struct port_info *port_info; | |
| /* TODO: read port flags from descriptors */ | |
| port_info = find_port_info(umidi, number); | |
| if (port_info) { | |
| seq_port_info->type = port_info->seq_flags; | |
| seq_port_info->midi_voices = port_info->voices; | |
| } | |
| } | |
| static void snd_usbmidi_init_substream(struct snd_usb_midi* umidi, | |
| int stream, int number, | |
| struct snd_rawmidi_substream ** rsubstream) | |
| { | |
| struct port_info *port_info; | |
| const char *name_format; | |
| struct snd_rawmidi_substream *substream = snd_usbmidi_find_substream(umidi, stream, number); | |
| if (!substream) { | |
| snd_printd(KERN_ERR "substream %d:%d not found\n", stream, number); | |
| return; | |
| } | |
| /* TODO: read port name from jack descriptor */ | |
| port_info = find_port_info(umidi, number); | |
| name_format = port_info ? port_info->name : "%s MIDI %d"; | |
| snprintf(substream->name, sizeof(substream->name), | |
| name_format, umidi->chip->card->shortname, number + 1); | |
| *rsubstream = substream; | |
| } | |
| /* | |
| * Creates the endpoints and their ports. | |
| */ | |
| static int snd_usbmidi_create_endpoints(struct snd_usb_midi* umidi, | |
| struct snd_usb_midi_endpoint_info* endpoints) | |
| { | |
| int i, j, err; | |
| int out_ports = 0, in_ports = 0; | |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { | |
| if (endpoints[i].out_cables) { | |
| err = snd_usbmidi_out_endpoint_create(umidi, &endpoints[i], | |
| &umidi->endpoints[i]); | |
| if (err < 0) | |
| return err; | |
| } | |
| if (endpoints[i].in_cables) { | |
| err = snd_usbmidi_in_endpoint_create(umidi, &endpoints[i], | |
| &umidi->endpoints[i]); | |
| if (err < 0) | |
| return err; | |
| } | |
| for (j = 0; j < 0x10; ++j) { | |
| if (endpoints[i].out_cables & (1 << j)) { | |
| snd_usbmidi_init_substream(umidi, SNDRV_RAWMIDI_STREAM_OUTPUT, out_ports, | |
| &umidi->endpoints[i].out->ports[j].substream); | |
| ++out_ports; | |
| } | |
| if (endpoints[i].in_cables & (1 << j)) { | |
| snd_usbmidi_init_substream(umidi, SNDRV_RAWMIDI_STREAM_INPUT, in_ports, | |
| &umidi->endpoints[i].in->ports[j].substream); | |
| ++in_ports; | |
| } | |
| } | |
| } | |
| snd_printdd(KERN_INFO "created %d output and %d input ports\n", | |
| out_ports, in_ports); | |
| return 0; | |
| } | |
| /* | |
| * Returns MIDIStreaming device capabilities. | |
| */ | |
| static int snd_usbmidi_get_ms_info(struct snd_usb_midi* umidi, | |
| struct snd_usb_midi_endpoint_info* endpoints) | |
| { | |
| struct usb_interface* intf; | |
| struct usb_host_interface *hostif; | |
| struct usb_interface_descriptor* intfd; | |
| struct usb_ms_header_descriptor* ms_header; | |
| struct usb_host_endpoint *hostep; | |
| struct usb_endpoint_descriptor* ep; | |
| struct usb_ms_endpoint_descriptor* ms_ep; | |
| int i, epidx; | |
| intf = umidi->iface; | |
| if (!intf) | |
| return -ENXIO; | |
| hostif = &intf->altsetting[0]; | |
| intfd = get_iface_desc(hostif); | |
| ms_header = (struct usb_ms_header_descriptor*)hostif->extra; | |
| if (hostif->extralen >= 7 && | |
| ms_header->bLength >= 7 && | |
| ms_header->bDescriptorType == USB_DT_CS_INTERFACE && | |
| ms_header->bDescriptorSubtype == HEADER) | |
| snd_printdd(KERN_INFO "MIDIStreaming version %02x.%02x\n", | |
| ms_header->bcdMSC[1], ms_header->bcdMSC[0]); | |
| else | |
| snd_printk(KERN_WARNING "MIDIStreaming interface descriptor not found\n"); | |
| epidx = 0; | |
| for (i = 0; i < intfd->bNumEndpoints; ++i) { | |
| hostep = &hostif->endpoint[i]; | |
| ep = get_ep_desc(hostep); | |
| if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK && | |
| (ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) | |
| continue; | |
| ms_ep = (struct usb_ms_endpoint_descriptor*)hostep->extra; | |
| if (hostep->extralen < 4 || | |
| ms_ep->bLength < 4 || | |
| ms_ep->bDescriptorType != USB_DT_CS_ENDPOINT || | |
| ms_ep->bDescriptorSubtype != MS_GENERAL) | |
| continue; | |
| if ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { | |
| if (endpoints[epidx].out_ep) { | |
| if (++epidx >= MIDI_MAX_ENDPOINTS) { | |
| snd_printk(KERN_WARNING "too many endpoints\n"); | |
| break; | |
| } | |
| } | |
| endpoints[epidx].out_ep = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; | |
| if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) | |
| endpoints[epidx].out_interval = ep->bInterval; | |
| endpoints[epidx].out_cables = (1 << ms_ep->bNumEmbMIDIJack) - 1; | |
| snd_printdd(KERN_INFO "EP %02X: %d jack(s)\n", | |
| ep->bEndpointAddress, ms_ep->bNumEmbMIDIJack); | |
| } else { | |
| if (endpoints[epidx].in_ep) { | |
| if (++epidx >= MIDI_MAX_ENDPOINTS) { | |
| snd_printk(KERN_WARNING "too many endpoints\n"); | |
| break; | |
| } | |
| } | |
| endpoints[epidx].in_ep = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; | |
| if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) | |
| endpoints[epidx].in_interval = ep->bInterval; | |
| endpoints[epidx].in_cables = (1 << ms_ep->bNumEmbMIDIJack) - 1; | |
| snd_printdd(KERN_INFO "EP %02X: %d jack(s)\n", | |
| ep->bEndpointAddress, ms_ep->bNumEmbMIDIJack); | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * On Roland devices, use the second alternate setting to be able to use | |
| * the interrupt input endpoint. | |
| */ | |
| static void snd_usbmidi_switch_roland_altsetting(struct snd_usb_midi* umidi) | |
| { | |
| struct usb_interface* intf; | |
| struct usb_host_interface *hostif; | |
| struct usb_interface_descriptor* intfd; | |
| intf = umidi->iface; | |
| if (!intf || intf->num_altsetting != 2) | |
| return; | |
| hostif = &intf->altsetting[1]; | |
| intfd = get_iface_desc(hostif); | |
| if (intfd->bNumEndpoints != 2 || | |
| (get_endpoint(hostif, 0)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK || | |
| (get_endpoint(hostif, 1)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) | |
| return; | |
| snd_printdd(KERN_INFO "switching to altsetting %d with int ep\n", | |
| intfd->bAlternateSetting); | |
| usb_set_interface(umidi->chip->dev, intfd->bInterfaceNumber, | |
| intfd->bAlternateSetting); | |
| } | |
| /* | |
| * Try to find any usable endpoints in the interface. | |
| */ | |
| static int snd_usbmidi_detect_endpoints(struct snd_usb_midi* umidi, | |
| struct snd_usb_midi_endpoint_info* endpoint, | |
| int max_endpoints) | |
| { | |
| struct usb_interface* intf; | |
| struct usb_host_interface *hostif; | |
| struct usb_interface_descriptor* intfd; | |
| struct usb_endpoint_descriptor* epd; | |
| int i, out_eps = 0, in_eps = 0; | |
| if (USB_ID_VENDOR(umidi->chip->usb_id) == 0x0582) | |
| snd_usbmidi_switch_roland_altsetting(umidi); | |
| if (endpoint[0].out_ep || endpoint[0].in_ep) | |
| return 0; | |
| intf = umidi->iface; | |
| if (!intf || intf->num_altsetting < 1) | |
| return -ENOENT; | |
| hostif = intf->cur_altsetting; | |
| intfd = get_iface_desc(hostif); | |
| for (i = 0; i < intfd->bNumEndpoints; ++i) { | |
| epd = get_endpoint(hostif, i); | |
| if ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK && | |
| (epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) | |
| continue; | |
| if (out_eps < max_endpoints && | |
| (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { | |
| endpoint[out_eps].out_ep = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; | |
| if ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) | |
| endpoint[out_eps].out_interval = epd->bInterval; | |
| ++out_eps; | |
| } | |
| if (in_eps < max_endpoints && | |
| (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { | |
| endpoint[in_eps].in_ep = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; | |
| if ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) | |
| endpoint[in_eps].in_interval = epd->bInterval; | |
| ++in_eps; | |
| } | |
| } | |
| return (out_eps || in_eps) ? 0 : -ENOENT; | |
| } | |
| /* | |
| * Detects the endpoints for one-port-per-endpoint protocols. | |
| */ | |
| static int snd_usbmidi_detect_per_port_endpoints(struct snd_usb_midi* umidi, | |
| struct snd_usb_midi_endpoint_info* endpoints) | |
| { | |
| int err, i; | |
| err = snd_usbmidi_detect_endpoints(umidi, endpoints, MIDI_MAX_ENDPOINTS); | |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { | |
| if (endpoints[i].out_ep) | |
| endpoints[i].out_cables = 0x0001; | |
| if (endpoints[i].in_ep) | |
| endpoints[i].in_cables = 0x0001; | |
| } | |
| return err; | |
| } | |
| /* | |
| * Detects the endpoints and ports of Yamaha devices. | |
| */ | |
| static int snd_usbmidi_detect_yamaha(struct snd_usb_midi* umidi, | |
| struct snd_usb_midi_endpoint_info* endpoint) | |
| { | |
| struct usb_interface* intf; | |
| struct usb_host_interface *hostif; | |
| struct usb_interface_descriptor* intfd; | |
| uint8_t* cs_desc; | |
| intf = umidi->iface; | |
| if (!intf) | |
| return -ENOENT; | |
| hostif = intf->altsetting; | |
| intfd = get_iface_desc(hostif); | |
| if (intfd->bNumEndpoints < 1) | |
| return -ENOENT; | |
| /* | |
| * For each port there is one MIDI_IN/OUT_JACK descriptor, not | |
| * necessarily with any useful contents. So simply count 'em. | |
| */ | |
| for (cs_desc = hostif->extra; | |
| cs_desc < hostif->extra + hostif->extralen && cs_desc[0] >= 2; | |
| cs_desc += cs_desc[0]) { | |
| if (cs_desc[1] == USB_DT_CS_INTERFACE) { | |
| if (cs_desc[2] == MIDI_IN_JACK) | |
| endpoint->in_cables = (endpoint->in_cables << 1) | 1; | |
| else if (cs_desc[2] == MIDI_OUT_JACK) | |
| endpoint->out_cables = (endpoint->out_cables << 1) | 1; | |
| } | |
| } | |
| if (!endpoint->in_cables && !endpoint->out_cables) | |
| return -ENOENT; | |
| return snd_usbmidi_detect_endpoints(umidi, endpoint, 1); | |
| } | |
| /* | |
| * Creates the endpoints and their ports for Midiman devices. | |
| */ | |
| static int snd_usbmidi_create_endpoints_midiman(struct snd_usb_midi* umidi, | |
| struct snd_usb_midi_endpoint_info* endpoint) | |
| { | |
| struct snd_usb_midi_endpoint_info ep_info; | |
| struct usb_interface* intf; | |
| struct usb_host_interface *hostif; | |
| struct usb_interface_descriptor* intfd; | |
| struct usb_endpoint_descriptor* epd; | |
| int cable, err; | |
| intf = umidi->iface; | |
| if (!intf) | |
| return -ENOENT; | |
| hostif = intf->altsetting; | |
| intfd = get_iface_desc(hostif); | |
| /* | |
| * The various MidiSport devices have more or less random endpoint | |
| * numbers, so we have to identify the endpoints by their index in | |
| * the descriptor array, like the driver for that other OS does. | |
| * | |
| * There is one interrupt input endpoint for all input ports, one | |
| * bulk output endpoint for even-numbered ports, and one for odd- | |
| * numbered ports. Both bulk output endpoints have corresponding | |
| * input bulk endpoints (at indices 1 and 3) which aren't used. | |
| */ | |
| if (intfd->bNumEndpoints < (endpoint->out_cables > 0x0001 ? 5 : 3)) { | |
| snd_printdd(KERN_ERR "not enough endpoints\n"); | |
| return -ENOENT; | |
| } | |
| epd = get_endpoint(hostif, 0); | |
| if ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) != USB_DIR_IN || | |
| (epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) { | |
| snd_printdd(KERN_ERR "endpoint[0] isn't interrupt\n"); | |
| return -ENXIO; | |
| } | |
| epd = get_endpoint(hostif, 2); | |
| if ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) != USB_DIR_OUT || | |
| (epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) { | |
| snd_printdd(KERN_ERR "endpoint[2] isn't bulk output\n"); | |
| return -ENXIO; | |
| } | |
| if (endpoint->out_cables > 0x0001) { | |
| epd = get_endpoint(hostif, 4); | |
| if ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) != USB_DIR_OUT || | |
| (epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) { | |
| snd_printdd(KERN_ERR "endpoint[4] isn't bulk output\n"); | |
| return -ENXIO; | |
| } | |
| } | |
| ep_info.out_ep = get_endpoint(hostif, 2)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; | |
| ep_info.out_cables = endpoint->out_cables & 0x5555; | |
| err = snd_usbmidi_out_endpoint_create(umidi, &ep_info, &umidi->endpoints[0]); | |
| if (err < 0) | |
| return err; | |
| ep_info.in_ep = get_endpoint(hostif, 0)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; | |
| ep_info.in_interval = get_endpoint(hostif, 0)->bInterval; | |
| ep_info.in_cables = endpoint->in_cables; | |
| err = snd_usbmidi_in_endpoint_create(umidi, &ep_info, &umidi->endpoints[0]); | |
| if (err < 0) | |
| return err; | |
| if (endpoint->out_cables > 0x0001) { | |
| ep_info.out_ep = get_endpoint(hostif, 4)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; | |
| ep_info.out_cables = endpoint->out_cables & 0xaaaa; | |
| err = snd_usbmidi_out_endpoint_create(umidi, &ep_info, &umidi->endpoints[1]); | |
| if (err < 0) | |
| return err; | |
| } | |
| for (cable = 0; cable < 0x10; ++cable) { | |
| if (endpoint->out_cables & (1 << cable)) | |
| snd_usbmidi_init_substream(umidi, SNDRV_RAWMIDI_STREAM_OUTPUT, cable, | |
| &umidi->endpoints[cable & 1].out->ports[cable].substream); | |
| if (endpoint->in_cables & (1 << cable)) | |
| snd_usbmidi_init_substream(umidi, SNDRV_RAWMIDI_STREAM_INPUT, cable, | |
| &umidi->endpoints[0].in->ports[cable].substream); | |
| } | |
| return 0; | |
| } | |
| static struct snd_rawmidi_global_ops snd_usbmidi_ops = { | |
| .get_port_info = snd_usbmidi_get_port_info, | |
| }; | |
| static int snd_usbmidi_create_rawmidi(struct snd_usb_midi* umidi, | |
| int out_ports, int in_ports) | |
| { | |
| struct snd_rawmidi *rmidi; | |
| int err; | |
| err = snd_rawmidi_new(umidi->chip->card, "USB MIDI", | |
| umidi->chip->next_midi_device++, | |
| out_ports, in_ports, &rmidi); | |
| if (err < 0) | |
| return err; | |
| strcpy(rmidi->name, umidi->chip->card->shortname); | |
| rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT | | |
| SNDRV_RAWMIDI_INFO_INPUT | | |
| SNDRV_RAWMIDI_INFO_DUPLEX; | |
| rmidi->ops = &snd_usbmidi_ops; | |
| rmidi->private_data = umidi; | |
| rmidi->private_free = snd_usbmidi_rawmidi_free; | |
| snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &snd_usbmidi_output_ops); | |
| snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &snd_usbmidi_input_ops); | |
| umidi->rmidi = rmidi; | |
| return 0; | |
| } | |
| /* | |
| * Temporarily stop input. | |
| */ | |
| void snd_usbmidi_input_stop(struct list_head* p) | |
| { | |
| struct snd_usb_midi* umidi; | |
| int i; | |
| umidi = list_entry(p, struct snd_usb_midi, list); | |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { | |
| struct snd_usb_midi_endpoint* ep = &umidi->endpoints[i]; | |
| if (ep->in) | |
| usb_kill_urb(ep->in->urb); | |
| } | |
| } | |
| static void snd_usbmidi_input_start_ep(struct snd_usb_midi_in_endpoint* ep) | |
| { | |
| if (ep) { | |
| struct urb* urb = ep->urb; | |
| urb->dev = ep->umidi->chip->dev; | |
| snd_usbmidi_submit_urb(urb, GFP_KERNEL); | |
| } | |
| } | |
| /* | |
| * Resume input after a call to snd_usbmidi_input_stop(). | |
| */ | |
| void snd_usbmidi_input_start(struct list_head* p) | |
| { | |
| struct snd_usb_midi* umidi; | |
| int i; | |
| umidi = list_entry(p, struct snd_usb_midi, list); | |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) | |
| snd_usbmidi_input_start_ep(umidi->endpoints[i].in); | |
| } | |
| /* | |
| * Creates and registers everything needed for a MIDI streaming interface. | |
| */ | |
| int snd_usb_create_midi_interface(struct snd_usb_audio* chip, | |
| struct usb_interface* iface, | |
| const struct snd_usb_audio_quirk* quirk) | |
| { | |
| struct snd_usb_midi* umidi; | |
| struct snd_usb_midi_endpoint_info endpoints[MIDI_MAX_ENDPOINTS]; | |
| int out_ports, in_ports; | |
| int i, err; | |
| umidi = kzalloc(sizeof(*umidi), GFP_KERNEL); | |
| if (!umidi) | |
| return -ENOMEM; | |
| umidi->chip = chip; | |
| umidi->iface = iface; | |
| umidi->quirk = quirk; | |
| umidi->usb_protocol_ops = &snd_usbmidi_standard_ops; | |
| init_timer(&umidi->error_timer); | |
| umidi->error_timer.function = snd_usbmidi_error_timer; | |
| umidi->error_timer.data = (unsigned long)umidi; | |
| /* detect the endpoint(s) to use */ | |
| memset(endpoints, 0, sizeof(endpoints)); | |
| switch (quirk ? quirk->type : QUIRK_MIDI_STANDARD_INTERFACE) { | |
| case QUIRK_MIDI_STANDARD_INTERFACE: | |
| err = snd_usbmidi_get_ms_info(umidi, endpoints); | |
| break; | |
| case QUIRK_MIDI_FIXED_ENDPOINT: | |
| memcpy(&endpoints[0], quirk->data, | |
| sizeof(struct snd_usb_midi_endpoint_info)); | |
| err = snd_usbmidi_detect_endpoints(umidi, &endpoints[0], 1); | |
| break; | |
| case QUIRK_MIDI_YAMAHA: | |
| err = snd_usbmidi_detect_yamaha(umidi, &endpoints[0]); | |
| break; | |
| case QUIRK_MIDI_MIDIMAN: | |
| umidi->usb_protocol_ops = &snd_usbmidi_midiman_ops; | |
| memcpy(&endpoints[0], quirk->data, | |
| sizeof(struct snd_usb_midi_endpoint_info)); | |
| err = 0; | |
| break; | |
| case QUIRK_MIDI_NOVATION: | |
| umidi->usb_protocol_ops = &snd_usbmidi_novation_ops; | |
| err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints); | |
| break; | |
| case QUIRK_MIDI_RAW: | |
| umidi->usb_protocol_ops = &snd_usbmidi_raw_ops; | |
| err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints); | |
| break; | |
| case QUIRK_MIDI_EMAGIC: | |
| umidi->usb_protocol_ops = &snd_usbmidi_emagic_ops; | |
| memcpy(&endpoints[0], quirk->data, | |
| sizeof(struct snd_usb_midi_endpoint_info)); | |
| err = snd_usbmidi_detect_endpoints(umidi, &endpoints[0], 1); | |
| break; | |
| case QUIRK_MIDI_CME: | |
| err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints); | |
| break; | |
| default: | |
| snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type); | |
| err = -ENXIO; | |
| break; | |
| } | |
| if (err < 0) { | |
| kfree(umidi); | |
| return err; | |
| } | |
| /* create rawmidi device */ | |
| out_ports = 0; | |
| in_ports = 0; | |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { | |
| out_ports += snd_usbmidi_count_bits(endpoints[i].out_cables); | |
| in_ports += snd_usbmidi_count_bits(endpoints[i].in_cables); | |
| } | |
| err = snd_usbmidi_create_rawmidi(umidi, out_ports, in_ports); | |
| if (err < 0) { | |
| kfree(umidi); | |
| return err; | |
| } | |
| /* create endpoint/port structures */ | |
| if (quirk && quirk->type == QUIRK_MIDI_MIDIMAN) | |
| err = snd_usbmidi_create_endpoints_midiman(umidi, &endpoints[0]); | |
| else | |
| err = snd_usbmidi_create_endpoints(umidi, endpoints); | |
| if (err < 0) { | |
| snd_usbmidi_free(umidi); | |
| return err; | |
| } | |
| list_add(&umidi->list, &umidi->chip->midi_list); | |
| for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) | |
| snd_usbmidi_input_start_ep(umidi->endpoints[i].in); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(snd_usb_create_midi_interface); | |
| EXPORT_SYMBOL(snd_usbmidi_input_stop); | |
| EXPORT_SYMBOL(snd_usbmidi_input_start); | |
| EXPORT_SYMBOL(snd_usbmidi_disconnect); |