| /*: | |
| * Hibernate support specific for ARM64 | |
| * | |
| * Derived from work on ARM hibernation support by: | |
| * | |
| * Ubuntu project, hibernation support for mach-dove | |
| * Copyright (C) 2010 Nokia Corporation (Hiroshi Doyu) | |
| * Copyright (C) 2010 Texas Instruments, Inc. (Teerth Reddy et al.) | |
| * https://lkml.org/lkml/2010/6/18/4 | |
| * https://lists.linux-foundation.org/pipermail/linux-pm/2010-June/027422.html | |
| * https://patchwork.kernel.org/patch/96442/ | |
| * | |
| * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl> | |
| * | |
| * License terms: GNU General Public License (GPL) version 2 | |
| */ | |
| #define pr_fmt(x) "hibernate: " x | |
| #include <linux/cpu.h> | |
| #include <linux/kvm_host.h> | |
| #include <linux/mm.h> | |
| #include <linux/pm.h> | |
| #include <linux/sched.h> | |
| #include <linux/suspend.h> | |
| #include <linux/utsname.h> | |
| #include <linux/version.h> | |
| #include <asm/barrier.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/cputype.h> | |
| #include <asm/irqflags.h> | |
| #include <asm/kexec.h> | |
| #include <asm/memory.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/pgalloc.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/pgtable-hwdef.h> | |
| #include <asm/sections.h> | |
| #include <asm/smp.h> | |
| #include <asm/smp_plat.h> | |
| #include <asm/suspend.h> | |
| #include <asm/sysreg.h> | |
| #include <asm/virt.h> | |
| /* | |
| * Hibernate core relies on this value being 0 on resume, and marks it | |
| * __nosavedata assuming it will keep the resume kernel's '0' value. This | |
| * doesn't happen with either KASLR. | |
| * | |
| * defined as "__visible int in_suspend __nosavedata" in | |
| * kernel/power/hibernate.c | |
| */ | |
| extern int in_suspend; | |
| /* Do we need to reset el2? */ | |
| #define el2_reset_needed() (is_hyp_mode_available() && !is_kernel_in_hyp_mode()) | |
| /* temporary el2 vectors in the __hibernate_exit_text section. */ | |
| extern char hibernate_el2_vectors[]; | |
| /* hyp-stub vectors, used to restore el2 during resume from hibernate. */ | |
| extern char __hyp_stub_vectors[]; | |
| /* | |
| * The logical cpu number we should resume on, initialised to a non-cpu | |
| * number. | |
| */ | |
| static int sleep_cpu = -EINVAL; | |
| /* | |
| * Values that may not change over hibernate/resume. We put the build number | |
| * and date in here so that we guarantee not to resume with a different | |
| * kernel. | |
| */ | |
| struct arch_hibernate_hdr_invariants { | |
| char uts_version[__NEW_UTS_LEN + 1]; | |
| }; | |
| /* These values need to be know across a hibernate/restore. */ | |
| static struct arch_hibernate_hdr { | |
| struct arch_hibernate_hdr_invariants invariants; | |
| /* These are needed to find the relocated kernel if built with kaslr */ | |
| phys_addr_t ttbr1_el1; | |
| void (*reenter_kernel)(void); | |
| /* | |
| * We need to know where the __hyp_stub_vectors are after restore to | |
| * re-configure el2. | |
| */ | |
| phys_addr_t __hyp_stub_vectors; | |
| u64 sleep_cpu_mpidr; | |
| } resume_hdr; | |
| static inline void arch_hdr_invariants(struct arch_hibernate_hdr_invariants *i) | |
| { | |
| memset(i, 0, sizeof(*i)); | |
| memcpy(i->uts_version, init_utsname()->version, sizeof(i->uts_version)); | |
| } | |
| int pfn_is_nosave(unsigned long pfn) | |
| { | |
| unsigned long nosave_begin_pfn = sym_to_pfn(&__nosave_begin); | |
| unsigned long nosave_end_pfn = sym_to_pfn(&__nosave_end - 1); | |
| return ((pfn >= nosave_begin_pfn) && (pfn <= nosave_end_pfn)) || | |
| crash_is_nosave(pfn); | |
| } | |
| void notrace save_processor_state(void) | |
| { | |
| WARN_ON(num_online_cpus() != 1); | |
| } | |
| void notrace restore_processor_state(void) | |
| { | |
| } | |
| int arch_hibernation_header_save(void *addr, unsigned int max_size) | |
| { | |
| struct arch_hibernate_hdr *hdr = addr; | |
| if (max_size < sizeof(*hdr)) | |
| return -EOVERFLOW; | |
| arch_hdr_invariants(&hdr->invariants); | |
| hdr->ttbr1_el1 = __pa_symbol(swapper_pg_dir); | |
| hdr->reenter_kernel = _cpu_resume; | |
| /* We can't use __hyp_get_vectors() because kvm may still be loaded */ | |
| if (el2_reset_needed()) | |
| hdr->__hyp_stub_vectors = __pa_symbol(__hyp_stub_vectors); | |
| else | |
| hdr->__hyp_stub_vectors = 0; | |
| /* Save the mpidr of the cpu we called cpu_suspend() on... */ | |
| if (sleep_cpu < 0) { | |
| pr_err("Failing to hibernate on an unknown CPU.\n"); | |
| return -ENODEV; | |
| } | |
| hdr->sleep_cpu_mpidr = cpu_logical_map(sleep_cpu); | |
| pr_info("Hibernating on CPU %d [mpidr:0x%llx]\n", sleep_cpu, | |
| hdr->sleep_cpu_mpidr); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(arch_hibernation_header_save); | |
| int arch_hibernation_header_restore(void *addr) | |
| { | |
| int ret; | |
| struct arch_hibernate_hdr_invariants invariants; | |
| struct arch_hibernate_hdr *hdr = addr; | |
| arch_hdr_invariants(&invariants); | |
| if (memcmp(&hdr->invariants, &invariants, sizeof(invariants))) { | |
| pr_crit("Hibernate image not generated by this kernel!\n"); | |
| return -EINVAL; | |
| } | |
| sleep_cpu = get_logical_index(hdr->sleep_cpu_mpidr); | |
| pr_info("Hibernated on CPU %d [mpidr:0x%llx]\n", sleep_cpu, | |
| hdr->sleep_cpu_mpidr); | |
| if (sleep_cpu < 0) { | |
| pr_crit("Hibernated on a CPU not known to this kernel!\n"); | |
| sleep_cpu = -EINVAL; | |
| return -EINVAL; | |
| } | |
| if (!cpu_online(sleep_cpu)) { | |
| pr_info("Hibernated on a CPU that is offline! Bringing CPU up.\n"); | |
| ret = cpu_up(sleep_cpu); | |
| if (ret) { | |
| pr_err("Failed to bring hibernate-CPU up!\n"); | |
| sleep_cpu = -EINVAL; | |
| return ret; | |
| } | |
| } | |
| resume_hdr = *hdr; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(arch_hibernation_header_restore); | |
| /* | |
| * Copies length bytes, starting at src_start into an new page, | |
| * perform cache maintentance, then maps it at the specified address low | |
| * address as executable. | |
| * | |
| * This is used by hibernate to copy the code it needs to execute when | |
| * overwriting the kernel text. This function generates a new set of page | |
| * tables, which it loads into ttbr0. | |
| * | |
| * Length is provided as we probably only want 4K of data, even on a 64K | |
| * page system. | |
| */ | |
| static int create_safe_exec_page(void *src_start, size_t length, | |
| unsigned long dst_addr, | |
| phys_addr_t *phys_dst_addr, | |
| void *(*allocator)(gfp_t mask), | |
| gfp_t mask) | |
| { | |
| int rc = 0; | |
| pgd_t *pgd; | |
| pud_t *pud; | |
| pmd_t *pmd; | |
| pte_t *pte; | |
| unsigned long dst = (unsigned long)allocator(mask); | |
| if (!dst) { | |
| rc = -ENOMEM; | |
| goto out; | |
| } | |
| memcpy((void *)dst, src_start, length); | |
| flush_icache_range(dst, dst + length); | |
| pgd = pgd_offset_raw(allocator(mask), dst_addr); | |
| if (pgd_none(*pgd)) { | |
| pud = allocator(mask); | |
| if (!pud) { | |
| rc = -ENOMEM; | |
| goto out; | |
| } | |
| pgd_populate(&init_mm, pgd, pud); | |
| } | |
| pud = pud_offset(pgd, dst_addr); | |
| if (pud_none(*pud)) { | |
| pmd = allocator(mask); | |
| if (!pmd) { | |
| rc = -ENOMEM; | |
| goto out; | |
| } | |
| pud_populate(&init_mm, pud, pmd); | |
| } | |
| pmd = pmd_offset(pud, dst_addr); | |
| if (pmd_none(*pmd)) { | |
| pte = allocator(mask); | |
| if (!pte) { | |
| rc = -ENOMEM; | |
| goto out; | |
| } | |
| pmd_populate_kernel(&init_mm, pmd, pte); | |
| } | |
| pte = pte_offset_kernel(pmd, dst_addr); | |
| set_pte(pte, __pte(virt_to_phys((void *)dst) | | |
| pgprot_val(PAGE_KERNEL_EXEC))); | |
| /* | |
| * Load our new page tables. A strict BBM approach requires that we | |
| * ensure that TLBs are free of any entries that may overlap with the | |
| * global mappings we are about to install. | |
| * | |
| * For a real hibernate/resume cycle TTBR0 currently points to a zero | |
| * page, but TLBs may contain stale ASID-tagged entries (e.g. for EFI | |
| * runtime services), while for a userspace-driven test_resume cycle it | |
| * points to userspace page tables (and we must point it at a zero page | |
| * ourselves). Elsewhere we only (un)install the idmap with preemption | |
| * disabled, so T0SZ should be as required regardless. | |
| */ | |
| cpu_set_reserved_ttbr0(); | |
| local_flush_tlb_all(); | |
| write_sysreg(virt_to_phys(pgd), ttbr0_el1); | |
| isb(); | |
| *phys_dst_addr = virt_to_phys((void *)dst); | |
| out: | |
| return rc; | |
| } | |
| #define dcache_clean_range(start, end) __flush_dcache_area(start, (end - start)) | |
| int swsusp_arch_suspend(void) | |
| { | |
| int ret = 0; | |
| unsigned long flags; | |
| struct sleep_stack_data state; | |
| if (cpus_are_stuck_in_kernel()) { | |
| pr_err("Can't hibernate: no mechanism to offline secondary CPUs.\n"); | |
| return -EBUSY; | |
| } | |
| local_dbg_save(flags); | |
| if (__cpu_suspend_enter(&state)) { | |
| /* make the crash dump kernel image visible/saveable */ | |
| crash_prepare_suspend(); | |
| sleep_cpu = smp_processor_id(); | |
| ret = swsusp_save(); | |
| } else { | |
| /* Clean kernel core startup/idle code to PoC*/ | |
| dcache_clean_range(__mmuoff_data_start, __mmuoff_data_end); | |
| dcache_clean_range(__idmap_text_start, __idmap_text_end); | |
| /* Clean kvm setup code to PoC? */ | |
| if (el2_reset_needed()) | |
| dcache_clean_range(__hyp_idmap_text_start, __hyp_idmap_text_end); | |
| /* make the crash dump kernel image protected again */ | |
| crash_post_resume(); | |
| /* | |
| * Tell the hibernation core that we've just restored | |
| * the memory | |
| */ | |
| in_suspend = 0; | |
| sleep_cpu = -EINVAL; | |
| __cpu_suspend_exit(); | |
| } | |
| local_dbg_restore(flags); | |
| return ret; | |
| } | |
| static void _copy_pte(pte_t *dst_pte, pte_t *src_pte, unsigned long addr) | |
| { | |
| pte_t pte = *src_pte; | |
| if (pte_valid(pte)) { | |
| /* | |
| * Resume will overwrite areas that may be marked | |
| * read only (code, rodata). Clear the RDONLY bit from | |
| * the temporary mappings we use during restore. | |
| */ | |
| set_pte(dst_pte, pte_clear_rdonly(pte)); | |
| } else if (debug_pagealloc_enabled() && !pte_none(pte)) { | |
| /* | |
| * debug_pagealloc will removed the PTE_VALID bit if | |
| * the page isn't in use by the resume kernel. It may have | |
| * been in use by the original kernel, in which case we need | |
| * to put it back in our copy to do the restore. | |
| * | |
| * Before marking this entry valid, check the pfn should | |
| * be mapped. | |
| */ | |
| BUG_ON(!pfn_valid(pte_pfn(pte))); | |
| set_pte(dst_pte, pte_mkpresent(pte_clear_rdonly(pte))); | |
| } | |
| } | |
| static int copy_pte(pmd_t *dst_pmd, pmd_t *src_pmd, unsigned long start, | |
| unsigned long end) | |
| { | |
| pte_t *src_pte; | |
| pte_t *dst_pte; | |
| unsigned long addr = start; | |
| dst_pte = (pte_t *)get_safe_page(GFP_ATOMIC); | |
| if (!dst_pte) | |
| return -ENOMEM; | |
| pmd_populate_kernel(&init_mm, dst_pmd, dst_pte); | |
| dst_pte = pte_offset_kernel(dst_pmd, start); | |
| src_pte = pte_offset_kernel(src_pmd, start); | |
| do { | |
| _copy_pte(dst_pte, src_pte, addr); | |
| } while (dst_pte++, src_pte++, addr += PAGE_SIZE, addr != end); | |
| return 0; | |
| } | |
| static int copy_pmd(pud_t *dst_pud, pud_t *src_pud, unsigned long start, | |
| unsigned long end) | |
| { | |
| pmd_t *src_pmd; | |
| pmd_t *dst_pmd; | |
| unsigned long next; | |
| unsigned long addr = start; | |
| if (pud_none(*dst_pud)) { | |
| dst_pmd = (pmd_t *)get_safe_page(GFP_ATOMIC); | |
| if (!dst_pmd) | |
| return -ENOMEM; | |
| pud_populate(&init_mm, dst_pud, dst_pmd); | |
| } | |
| dst_pmd = pmd_offset(dst_pud, start); | |
| src_pmd = pmd_offset(src_pud, start); | |
| do { | |
| next = pmd_addr_end(addr, end); | |
| if (pmd_none(*src_pmd)) | |
| continue; | |
| if (pmd_table(*src_pmd)) { | |
| if (copy_pte(dst_pmd, src_pmd, addr, next)) | |
| return -ENOMEM; | |
| } else { | |
| set_pmd(dst_pmd, | |
| __pmd(pmd_val(*src_pmd) & ~PMD_SECT_RDONLY)); | |
| } | |
| } while (dst_pmd++, src_pmd++, addr = next, addr != end); | |
| return 0; | |
| } | |
| static int copy_pud(pgd_t *dst_pgd, pgd_t *src_pgd, unsigned long start, | |
| unsigned long end) | |
| { | |
| pud_t *dst_pud; | |
| pud_t *src_pud; | |
| unsigned long next; | |
| unsigned long addr = start; | |
| if (pgd_none(*dst_pgd)) { | |
| dst_pud = (pud_t *)get_safe_page(GFP_ATOMIC); | |
| if (!dst_pud) | |
| return -ENOMEM; | |
| pgd_populate(&init_mm, dst_pgd, dst_pud); | |
| } | |
| dst_pud = pud_offset(dst_pgd, start); | |
| src_pud = pud_offset(src_pgd, start); | |
| do { | |
| next = pud_addr_end(addr, end); | |
| if (pud_none(*src_pud)) | |
| continue; | |
| if (pud_table(*(src_pud))) { | |
| if (copy_pmd(dst_pud, src_pud, addr, next)) | |
| return -ENOMEM; | |
| } else { | |
| set_pud(dst_pud, | |
| __pud(pud_val(*src_pud) & ~PMD_SECT_RDONLY)); | |
| } | |
| } while (dst_pud++, src_pud++, addr = next, addr != end); | |
| return 0; | |
| } | |
| static int copy_page_tables(pgd_t *dst_pgd, unsigned long start, | |
| unsigned long end) | |
| { | |
| unsigned long next; | |
| unsigned long addr = start; | |
| pgd_t *src_pgd = pgd_offset_k(start); | |
| dst_pgd = pgd_offset_raw(dst_pgd, start); | |
| do { | |
| next = pgd_addr_end(addr, end); | |
| if (pgd_none(*src_pgd)) | |
| continue; | |
| if (copy_pud(dst_pgd, src_pgd, addr, next)) | |
| return -ENOMEM; | |
| } while (dst_pgd++, src_pgd++, addr = next, addr != end); | |
| return 0; | |
| } | |
| /* | |
| * Setup then Resume from the hibernate image using swsusp_arch_suspend_exit(). | |
| * | |
| * Memory allocated by get_safe_page() will be dealt with by the hibernate code, | |
| * we don't need to free it here. | |
| */ | |
| int swsusp_arch_resume(void) | |
| { | |
| int rc = 0; | |
| void *zero_page; | |
| size_t exit_size; | |
| pgd_t *tmp_pg_dir; | |
| phys_addr_t phys_hibernate_exit; | |
| void __noreturn (*hibernate_exit)(phys_addr_t, phys_addr_t, void *, | |
| void *, phys_addr_t, phys_addr_t); | |
| /* | |
| * Restoring the memory image will overwrite the ttbr1 page tables. | |
| * Create a second copy of just the linear map, and use this when | |
| * restoring. | |
| */ | |
| tmp_pg_dir = (pgd_t *)get_safe_page(GFP_ATOMIC); | |
| if (!tmp_pg_dir) { | |
| pr_err("Failed to allocate memory for temporary page tables.\n"); | |
| rc = -ENOMEM; | |
| goto out; | |
| } | |
| rc = copy_page_tables(tmp_pg_dir, PAGE_OFFSET, 0); | |
| if (rc) | |
| goto out; | |
| /* | |
| * We need a zero page that is zero before & after resume in order to | |
| * to break before make on the ttbr1 page tables. | |
| */ | |
| zero_page = (void *)get_safe_page(GFP_ATOMIC); | |
| if (!zero_page) { | |
| pr_err("Failed to allocate zero page.\n"); | |
| rc = -ENOMEM; | |
| goto out; | |
| } | |
| /* | |
| * Locate the exit code in the bottom-but-one page, so that *NULL | |
| * still has disastrous affects. | |
| */ | |
| hibernate_exit = (void *)PAGE_SIZE; | |
| exit_size = __hibernate_exit_text_end - __hibernate_exit_text_start; | |
| /* | |
| * Copy swsusp_arch_suspend_exit() to a safe page. This will generate | |
| * a new set of ttbr0 page tables and load them. | |
| */ | |
| rc = create_safe_exec_page(__hibernate_exit_text_start, exit_size, | |
| (unsigned long)hibernate_exit, | |
| &phys_hibernate_exit, | |
| (void *)get_safe_page, GFP_ATOMIC); | |
| if (rc) { | |
| pr_err("Failed to create safe executable page for hibernate_exit code.\n"); | |
| goto out; | |
| } | |
| /* | |
| * The hibernate exit text contains a set of el2 vectors, that will | |
| * be executed at el2 with the mmu off in order to reload hyp-stub. | |
| */ | |
| __flush_dcache_area(hibernate_exit, exit_size); | |
| /* | |
| * KASLR will cause the el2 vectors to be in a different location in | |
| * the resumed kernel. Load hibernate's temporary copy into el2. | |
| * | |
| * We can skip this step if we booted at EL1, or are running with VHE. | |
| */ | |
| if (el2_reset_needed()) { | |
| phys_addr_t el2_vectors = phys_hibernate_exit; /* base */ | |
| el2_vectors += hibernate_el2_vectors - | |
| __hibernate_exit_text_start; /* offset */ | |
| __hyp_set_vectors(el2_vectors); | |
| } | |
| hibernate_exit(virt_to_phys(tmp_pg_dir), resume_hdr.ttbr1_el1, | |
| resume_hdr.reenter_kernel, restore_pblist, | |
| resume_hdr.__hyp_stub_vectors, virt_to_phys(zero_page)); | |
| out: | |
| return rc; | |
| } | |
| int hibernate_resume_nonboot_cpu_disable(void) | |
| { | |
| if (sleep_cpu < 0) { | |
| pr_err("Failing to resume from hibernate on an unknown CPU.\n"); | |
| return -ENODEV; | |
| } | |
| return freeze_secondary_cpus(sleep_cpu); | |
| } |