| /* |
| * Driver for Microchip MRF24J40 802.15.4 Wireless-PAN Networking controller |
| * |
| * Copyright (C) 2012 Alan Ott <alan@signal11.us> |
| * Signal 11 Software |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/spi/spi.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regmap.h> |
| #include <linux/ieee802154.h> |
| #include <linux/irq.h> |
| #include <net/cfg802154.h> |
| #include <net/mac802154.h> |
| |
| /* MRF24J40 Short Address Registers */ |
| #define REG_RXMCR 0x00 /* Receive MAC control */ |
| #define BIT_PROMI BIT(0) |
| #define BIT_ERRPKT BIT(1) |
| #define BIT_NOACKRSP BIT(5) |
| #define BIT_PANCOORD BIT(3) |
| |
| #define REG_PANIDL 0x01 /* PAN ID (low) */ |
| #define REG_PANIDH 0x02 /* PAN ID (high) */ |
| #define REG_SADRL 0x03 /* Short address (low) */ |
| #define REG_SADRH 0x04 /* Short address (high) */ |
| #define REG_EADR0 0x05 /* Long address (low) (high is EADR7) */ |
| #define REG_EADR1 0x06 |
| #define REG_EADR2 0x07 |
| #define REG_EADR3 0x08 |
| #define REG_EADR4 0x09 |
| #define REG_EADR5 0x0A |
| #define REG_EADR6 0x0B |
| #define REG_EADR7 0x0C |
| #define REG_RXFLUSH 0x0D |
| #define REG_ORDER 0x10 |
| #define REG_TXMCR 0x11 /* Transmit MAC control */ |
| #define TXMCR_MIN_BE_SHIFT 3 |
| #define TXMCR_MIN_BE_MASK 0x18 |
| #define TXMCR_CSMA_RETRIES_SHIFT 0 |
| #define TXMCR_CSMA_RETRIES_MASK 0x07 |
| |
| #define REG_ACKTMOUT 0x12 |
| #define REG_ESLOTG1 0x13 |
| #define REG_SYMTICKL 0x14 |
| #define REG_SYMTICKH 0x15 |
| #define REG_PACON0 0x16 /* Power Amplifier Control */ |
| #define REG_PACON1 0x17 /* Power Amplifier Control */ |
| #define REG_PACON2 0x18 /* Power Amplifier Control */ |
| #define REG_TXBCON0 0x1A |
| #define REG_TXNCON 0x1B /* Transmit Normal FIFO Control */ |
| #define BIT_TXNTRIG BIT(0) |
| #define BIT_TXNSECEN BIT(1) |
| #define BIT_TXNACKREQ BIT(2) |
| |
| #define REG_TXG1CON 0x1C |
| #define REG_TXG2CON 0x1D |
| #define REG_ESLOTG23 0x1E |
| #define REG_ESLOTG45 0x1F |
| #define REG_ESLOTG67 0x20 |
| #define REG_TXPEND 0x21 |
| #define REG_WAKECON 0x22 |
| #define REG_FROMOFFSET 0x23 |
| #define REG_TXSTAT 0x24 /* TX MAC Status Register */ |
| #define REG_TXBCON1 0x25 |
| #define REG_GATECLK 0x26 |
| #define REG_TXTIME 0x27 |
| #define REG_HSYMTMRL 0x28 |
| #define REG_HSYMTMRH 0x29 |
| #define REG_SOFTRST 0x2A /* Soft Reset */ |
| #define REG_SECCON0 0x2C |
| #define REG_SECCON1 0x2D |
| #define REG_TXSTBL 0x2E /* TX Stabilization */ |
| #define REG_RXSR 0x30 |
| #define REG_INTSTAT 0x31 /* Interrupt Status */ |
| #define BIT_TXNIF BIT(0) |
| #define BIT_RXIF BIT(3) |
| #define BIT_SECIF BIT(4) |
| #define BIT_SECIGNORE BIT(7) |
| |
| #define REG_INTCON 0x32 /* Interrupt Control */ |
| #define BIT_TXNIE BIT(0) |
| #define BIT_RXIE BIT(3) |
| #define BIT_SECIE BIT(4) |
| |
| #define REG_GPIO 0x33 /* GPIO */ |
| #define REG_TRISGPIO 0x34 /* GPIO direction */ |
| #define REG_SLPACK 0x35 |
| #define REG_RFCTL 0x36 /* RF Control Mode Register */ |
| #define BIT_RFRST BIT(2) |
| |
| #define REG_SECCR2 0x37 |
| #define REG_BBREG0 0x38 |
| #define REG_BBREG1 0x39 /* Baseband Registers */ |
| #define BIT_RXDECINV BIT(2) |
| |
| #define REG_BBREG2 0x3A /* */ |
| #define BBREG2_CCA_MODE_SHIFT 6 |
| #define BBREG2_CCA_MODE_MASK 0xc0 |
| |
| #define REG_BBREG3 0x3B |
| #define REG_BBREG4 0x3C |
| #define REG_BBREG6 0x3E /* */ |
| #define REG_CCAEDTH 0x3F /* Energy Detection Threshold */ |
| |
| /* MRF24J40 Long Address Registers */ |
| #define REG_RFCON0 0x200 /* RF Control Registers */ |
| #define RFCON0_CH_SHIFT 4 |
| #define RFCON0_CH_MASK 0xf0 |
| #define RFOPT_RECOMMEND 3 |
| |
| #define REG_RFCON1 0x201 |
| #define REG_RFCON2 0x202 |
| #define REG_RFCON3 0x203 |
| |
| #define TXPWRL_MASK 0xc0 |
| #define TXPWRL_SHIFT 6 |
| #define TXPWRL_30 0x3 |
| #define TXPWRL_20 0x2 |
| #define TXPWRL_10 0x1 |
| #define TXPWRL_0 0x0 |
| |
| #define TXPWRS_MASK 0x38 |
| #define TXPWRS_SHIFT 3 |
| #define TXPWRS_6_3 0x7 |
| #define TXPWRS_4_9 0x6 |
| #define TXPWRS_3_7 0x5 |
| #define TXPWRS_2_8 0x4 |
| #define TXPWRS_1_9 0x3 |
| #define TXPWRS_1_2 0x2 |
| #define TXPWRS_0_5 0x1 |
| #define TXPWRS_0 0x0 |
| |
| #define REG_RFCON5 0x205 |
| #define REG_RFCON6 0x206 |
| #define REG_RFCON7 0x207 |
| #define REG_RFCON8 0x208 |
| #define REG_SLPCAL0 0x209 |
| #define REG_SLPCAL1 0x20A |
| #define REG_SLPCAL2 0x20B |
| #define REG_RFSTATE 0x20F |
| #define REG_RSSI 0x210 |
| #define REG_SLPCON0 0x211 /* Sleep Clock Control Registers */ |
| #define BIT_INTEDGE BIT(1) |
| |
| #define REG_SLPCON1 0x220 |
| #define REG_WAKETIMEL 0x222 /* Wake-up Time Match Value Low */ |
| #define REG_WAKETIMEH 0x223 /* Wake-up Time Match Value High */ |
| #define REG_REMCNTL 0x224 |
| #define REG_REMCNTH 0x225 |
| #define REG_MAINCNT0 0x226 |
| #define REG_MAINCNT1 0x227 |
| #define REG_MAINCNT2 0x228 |
| #define REG_MAINCNT3 0x229 |
| #define REG_TESTMODE 0x22F /* Test mode */ |
| #define REG_ASSOEAR0 0x230 |
| #define REG_ASSOEAR1 0x231 |
| #define REG_ASSOEAR2 0x232 |
| #define REG_ASSOEAR3 0x233 |
| #define REG_ASSOEAR4 0x234 |
| #define REG_ASSOEAR5 0x235 |
| #define REG_ASSOEAR6 0x236 |
| #define REG_ASSOEAR7 0x237 |
| #define REG_ASSOSAR0 0x238 |
| #define REG_ASSOSAR1 0x239 |
| #define REG_UNONCE0 0x240 |
| #define REG_UNONCE1 0x241 |
| #define REG_UNONCE2 0x242 |
| #define REG_UNONCE3 0x243 |
| #define REG_UNONCE4 0x244 |
| #define REG_UNONCE5 0x245 |
| #define REG_UNONCE6 0x246 |
| #define REG_UNONCE7 0x247 |
| #define REG_UNONCE8 0x248 |
| #define REG_UNONCE9 0x249 |
| #define REG_UNONCE10 0x24A |
| #define REG_UNONCE11 0x24B |
| #define REG_UNONCE12 0x24C |
| #define REG_RX_FIFO 0x300 /* Receive FIFO */ |
| |
| /* Device configuration: Only channels 11-26 on page 0 are supported. */ |
| #define MRF24J40_CHAN_MIN 11 |
| #define MRF24J40_CHAN_MAX 26 |
| #define CHANNEL_MASK (((u32)1 << (MRF24J40_CHAN_MAX + 1)) \ |
| - ((u32)1 << MRF24J40_CHAN_MIN)) |
| |
| #define TX_FIFO_SIZE 128 /* From datasheet */ |
| #define RX_FIFO_SIZE 144 /* From datasheet */ |
| #define SET_CHANNEL_DELAY_US 192 /* From datasheet */ |
| |
| enum mrf24j40_modules { MRF24J40, MRF24J40MA, MRF24J40MC }; |
| |
| /* Device Private Data */ |
| struct mrf24j40 { |
| struct spi_device *spi; |
| struct ieee802154_hw *hw; |
| |
| struct regmap *regmap_short; |
| struct regmap *regmap_long; |
| |
| /* for writing txfifo */ |
| struct spi_message tx_msg; |
| u8 tx_hdr_buf[2]; |
| struct spi_transfer tx_hdr_trx; |
| u8 tx_len_buf[2]; |
| struct spi_transfer tx_len_trx; |
| struct spi_transfer tx_buf_trx; |
| struct sk_buff *tx_skb; |
| |
| /* post transmit message to send frame out */ |
| struct spi_message tx_post_msg; |
| u8 tx_post_buf[2]; |
| struct spi_transfer tx_post_trx; |
| |
| /* for protect/unprotect/read length rxfifo */ |
| struct spi_message rx_msg; |
| u8 rx_buf[3]; |
| struct spi_transfer rx_trx; |
| |
| /* receive handling */ |
| struct spi_message rx_buf_msg; |
| u8 rx_addr_buf[2]; |
| struct spi_transfer rx_addr_trx; |
| u8 rx_lqi_buf[2]; |
| struct spi_transfer rx_lqi_trx; |
| u8 rx_fifo_buf[RX_FIFO_SIZE]; |
| struct spi_transfer rx_fifo_buf_trx; |
| |
| /* isr handling for reading intstat */ |
| struct spi_message irq_msg; |
| u8 irq_buf[2]; |
| struct spi_transfer irq_trx; |
| }; |
| |
| /* regmap information for short address register access */ |
| #define MRF24J40_SHORT_WRITE 0x01 |
| #define MRF24J40_SHORT_READ 0x00 |
| #define MRF24J40_SHORT_NUMREGS 0x3F |
| |
| /* regmap information for long address register access */ |
| #define MRF24J40_LONG_ACCESS 0x80 |
| #define MRF24J40_LONG_NUMREGS 0x38F |
| |
| /* Read/Write SPI Commands for Short and Long Address registers. */ |
| #define MRF24J40_READSHORT(reg) ((reg) << 1) |
| #define MRF24J40_WRITESHORT(reg) ((reg) << 1 | 1) |
| #define MRF24J40_READLONG(reg) (1 << 15 | (reg) << 5) |
| #define MRF24J40_WRITELONG(reg) (1 << 15 | (reg) << 5 | 1 << 4) |
| |
| /* The datasheet indicates the theoretical maximum for SCK to be 10MHz */ |
| #define MAX_SPI_SPEED_HZ 10000000 |
| |
| #define printdev(X) (&X->spi->dev) |
| |
| static bool |
| mrf24j40_short_reg_writeable(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case REG_RXMCR: |
| case REG_PANIDL: |
| case REG_PANIDH: |
| case REG_SADRL: |
| case REG_SADRH: |
| case REG_EADR0: |
| case REG_EADR1: |
| case REG_EADR2: |
| case REG_EADR3: |
| case REG_EADR4: |
| case REG_EADR5: |
| case REG_EADR6: |
| case REG_EADR7: |
| case REG_RXFLUSH: |
| case REG_ORDER: |
| case REG_TXMCR: |
| case REG_ACKTMOUT: |
| case REG_ESLOTG1: |
| case REG_SYMTICKL: |
| case REG_SYMTICKH: |
| case REG_PACON0: |
| case REG_PACON1: |
| case REG_PACON2: |
| case REG_TXBCON0: |
| case REG_TXNCON: |
| case REG_TXG1CON: |
| case REG_TXG2CON: |
| case REG_ESLOTG23: |
| case REG_ESLOTG45: |
| case REG_ESLOTG67: |
| case REG_TXPEND: |
| case REG_WAKECON: |
| case REG_FROMOFFSET: |
| case REG_TXBCON1: |
| case REG_GATECLK: |
| case REG_TXTIME: |
| case REG_HSYMTMRL: |
| case REG_HSYMTMRH: |
| case REG_SOFTRST: |
| case REG_SECCON0: |
| case REG_SECCON1: |
| case REG_TXSTBL: |
| case REG_RXSR: |
| case REG_INTCON: |
| case REG_TRISGPIO: |
| case REG_GPIO: |
| case REG_RFCTL: |
| case REG_SECCR2: |
| case REG_SLPACK: |
| case REG_BBREG0: |
| case REG_BBREG1: |
| case REG_BBREG2: |
| case REG_BBREG3: |
| case REG_BBREG4: |
| case REG_BBREG6: |
| case REG_CCAEDTH: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool |
| mrf24j40_short_reg_readable(struct device *dev, unsigned int reg) |
| { |
| bool rc; |
| |
| /* all writeable are also readable */ |
| rc = mrf24j40_short_reg_writeable(dev, reg); |
| if (rc) |
| return rc; |
| |
| /* readonly regs */ |
| switch (reg) { |
| case REG_TXSTAT: |
| case REG_INTSTAT: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool |
| mrf24j40_short_reg_volatile(struct device *dev, unsigned int reg) |
| { |
| /* can be changed during runtime */ |
| switch (reg) { |
| case REG_TXSTAT: |
| case REG_INTSTAT: |
| case REG_RXFLUSH: |
| case REG_TXNCON: |
| case REG_SOFTRST: |
| case REG_RFCTL: |
| case REG_TXBCON0: |
| case REG_TXG1CON: |
| case REG_TXG2CON: |
| case REG_TXBCON1: |
| case REG_SECCON0: |
| case REG_RXSR: |
| case REG_SLPACK: |
| case REG_SECCR2: |
| case REG_BBREG6: |
| /* use them in spi_async and regmap so it's volatile */ |
| case REG_BBREG1: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool |
| mrf24j40_short_reg_precious(struct device *dev, unsigned int reg) |
| { |
| /* don't clear irq line on read */ |
| switch (reg) { |
| case REG_INTSTAT: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_config mrf24j40_short_regmap = { |
| .name = "mrf24j40_short", |
| .reg_bits = 7, |
| .val_bits = 8, |
| .pad_bits = 1, |
| .write_flag_mask = MRF24J40_SHORT_WRITE, |
| .read_flag_mask = MRF24J40_SHORT_READ, |
| .cache_type = REGCACHE_RBTREE, |
| .max_register = MRF24J40_SHORT_NUMREGS, |
| .writeable_reg = mrf24j40_short_reg_writeable, |
| .readable_reg = mrf24j40_short_reg_readable, |
| .volatile_reg = mrf24j40_short_reg_volatile, |
| .precious_reg = mrf24j40_short_reg_precious, |
| }; |
| |
| static bool |
| mrf24j40_long_reg_writeable(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case REG_RFCON0: |
| case REG_RFCON1: |
| case REG_RFCON2: |
| case REG_RFCON3: |
| case REG_RFCON5: |
| case REG_RFCON6: |
| case REG_RFCON7: |
| case REG_RFCON8: |
| case REG_SLPCAL2: |
| case REG_SLPCON0: |
| case REG_SLPCON1: |
| case REG_WAKETIMEL: |
| case REG_WAKETIMEH: |
| case REG_REMCNTL: |
| case REG_REMCNTH: |
| case REG_MAINCNT0: |
| case REG_MAINCNT1: |
| case REG_MAINCNT2: |
| case REG_MAINCNT3: |
| case REG_TESTMODE: |
| case REG_ASSOEAR0: |
| case REG_ASSOEAR1: |
| case REG_ASSOEAR2: |
| case REG_ASSOEAR3: |
| case REG_ASSOEAR4: |
| case REG_ASSOEAR5: |
| case REG_ASSOEAR6: |
| case REG_ASSOEAR7: |
| case REG_ASSOSAR0: |
| case REG_ASSOSAR1: |
| case REG_UNONCE0: |
| case REG_UNONCE1: |
| case REG_UNONCE2: |
| case REG_UNONCE3: |
| case REG_UNONCE4: |
| case REG_UNONCE5: |
| case REG_UNONCE6: |
| case REG_UNONCE7: |
| case REG_UNONCE8: |
| case REG_UNONCE9: |
| case REG_UNONCE10: |
| case REG_UNONCE11: |
| case REG_UNONCE12: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool |
| mrf24j40_long_reg_readable(struct device *dev, unsigned int reg) |
| { |
| bool rc; |
| |
| /* all writeable are also readable */ |
| rc = mrf24j40_long_reg_writeable(dev, reg); |
| if (rc) |
| return rc; |
| |
| /* readonly regs */ |
| switch (reg) { |
| case REG_SLPCAL0: |
| case REG_SLPCAL1: |
| case REG_RFSTATE: |
| case REG_RSSI: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool |
| mrf24j40_long_reg_volatile(struct device *dev, unsigned int reg) |
| { |
| /* can be changed during runtime */ |
| switch (reg) { |
| case REG_SLPCAL0: |
| case REG_SLPCAL1: |
| case REG_SLPCAL2: |
| case REG_RFSTATE: |
| case REG_RSSI: |
| case REG_MAINCNT3: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_config mrf24j40_long_regmap = { |
| .name = "mrf24j40_long", |
| .reg_bits = 11, |
| .val_bits = 8, |
| .pad_bits = 5, |
| .write_flag_mask = MRF24J40_LONG_ACCESS, |
| .read_flag_mask = MRF24J40_LONG_ACCESS, |
| .cache_type = REGCACHE_RBTREE, |
| .max_register = MRF24J40_LONG_NUMREGS, |
| .writeable_reg = mrf24j40_long_reg_writeable, |
| .readable_reg = mrf24j40_long_reg_readable, |
| .volatile_reg = mrf24j40_long_reg_volatile, |
| }; |
| |
| static int mrf24j40_long_regmap_write(void *context, const void *data, |
| size_t count) |
| { |
| struct spi_device *spi = context; |
| u8 buf[3]; |
| |
| if (count > 3) |
| return -EINVAL; |
| |
| /* regmap supports read/write mask only in frist byte |
| * long write access need to set the 12th bit, so we |
| * make special handling for write. |
| */ |
| memcpy(buf, data, count); |
| buf[1] |= (1 << 4); |
| |
| return spi_write(spi, buf, count); |
| } |
| |
| static int |
| mrf24j40_long_regmap_read(void *context, const void *reg, size_t reg_size, |
| void *val, size_t val_size) |
| { |
| struct spi_device *spi = context; |
| |
| return spi_write_then_read(spi, reg, reg_size, val, val_size); |
| } |
| |
| static const struct regmap_bus mrf24j40_long_regmap_bus = { |
| .write = mrf24j40_long_regmap_write, |
| .read = mrf24j40_long_regmap_read, |
| .reg_format_endian_default = REGMAP_ENDIAN_BIG, |
| .val_format_endian_default = REGMAP_ENDIAN_BIG, |
| }; |
| |
| static void write_tx_buf_complete(void *context) |
| { |
| struct mrf24j40 *devrec = context; |
| __le16 fc = ieee802154_get_fc_from_skb(devrec->tx_skb); |
| u8 val = BIT_TXNTRIG; |
| int ret; |
| |
| if (ieee802154_is_secen(fc)) |
| val |= BIT_TXNSECEN; |
| |
| if (ieee802154_is_ackreq(fc)) |
| val |= BIT_TXNACKREQ; |
| |
| devrec->tx_post_msg.complete = NULL; |
| devrec->tx_post_buf[0] = MRF24J40_WRITESHORT(REG_TXNCON); |
| devrec->tx_post_buf[1] = val; |
| |
| ret = spi_async(devrec->spi, &devrec->tx_post_msg); |
| if (ret) |
| dev_err(printdev(devrec), "SPI write Failed for transmit buf\n"); |
| } |
| |
| /* This function relies on an undocumented write method. Once a write command |
| and address is set, as many bytes of data as desired can be clocked into |
| the device. The datasheet only shows setting one byte at a time. */ |
| static int write_tx_buf(struct mrf24j40 *devrec, u16 reg, |
| const u8 *data, size_t length) |
| { |
| u16 cmd; |
| int ret; |
| |
| /* Range check the length. 2 bytes are used for the length fields.*/ |
| if (length > TX_FIFO_SIZE-2) { |
| dev_err(printdev(devrec), "write_tx_buf() was passed too large a buffer. Performing short write.\n"); |
| length = TX_FIFO_SIZE-2; |
| } |
| |
| cmd = MRF24J40_WRITELONG(reg); |
| devrec->tx_hdr_buf[0] = cmd >> 8 & 0xff; |
| devrec->tx_hdr_buf[1] = cmd & 0xff; |
| devrec->tx_len_buf[0] = 0x0; /* Header Length. Set to 0 for now. TODO */ |
| devrec->tx_len_buf[1] = length; /* Total length */ |
| devrec->tx_buf_trx.tx_buf = data; |
| devrec->tx_buf_trx.len = length; |
| |
| ret = spi_async(devrec->spi, &devrec->tx_msg); |
| if (ret) |
| dev_err(printdev(devrec), "SPI write Failed for TX buf\n"); |
| |
| return ret; |
| } |
| |
| static int mrf24j40_tx(struct ieee802154_hw *hw, struct sk_buff *skb) |
| { |
| struct mrf24j40 *devrec = hw->priv; |
| |
| dev_dbg(printdev(devrec), "tx packet of %d bytes\n", skb->len); |
| devrec->tx_skb = skb; |
| |
| return write_tx_buf(devrec, 0x000, skb->data, skb->len); |
| } |
| |
| static int mrf24j40_ed(struct ieee802154_hw *hw, u8 *level) |
| { |
| /* TODO: */ |
| pr_warn("mrf24j40: ed not implemented\n"); |
| *level = 0; |
| return 0; |
| } |
| |
| static int mrf24j40_start(struct ieee802154_hw *hw) |
| { |
| struct mrf24j40 *devrec = hw->priv; |
| |
| dev_dbg(printdev(devrec), "start\n"); |
| |
| /* Clear TXNIE and RXIE. Enable interrupts */ |
| return regmap_update_bits(devrec->regmap_short, REG_INTCON, |
| BIT_TXNIE | BIT_RXIE | BIT_SECIE, 0); |
| } |
| |
| static void mrf24j40_stop(struct ieee802154_hw *hw) |
| { |
| struct mrf24j40 *devrec = hw->priv; |
| |
| dev_dbg(printdev(devrec), "stop\n"); |
| |
| /* Set TXNIE and RXIE. Disable Interrupts */ |
| regmap_update_bits(devrec->regmap_short, REG_INTCON, |
| BIT_TXNIE | BIT_TXNIE, BIT_TXNIE | BIT_TXNIE); |
| } |
| |
| static int mrf24j40_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel) |
| { |
| struct mrf24j40 *devrec = hw->priv; |
| u8 val; |
| int ret; |
| |
| dev_dbg(printdev(devrec), "Set Channel %d\n", channel); |
| |
| WARN_ON(page != 0); |
| WARN_ON(channel < MRF24J40_CHAN_MIN); |
| WARN_ON(channel > MRF24J40_CHAN_MAX); |
| |
| /* Set Channel TODO */ |
| val = (channel - 11) << RFCON0_CH_SHIFT | RFOPT_RECOMMEND; |
| ret = regmap_update_bits(devrec->regmap_long, REG_RFCON0, |
| RFCON0_CH_MASK, val); |
| if (ret) |
| return ret; |
| |
| /* RF Reset */ |
| ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, BIT_RFRST, |
| BIT_RFRST); |
| if (ret) |
| return ret; |
| |
| ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, BIT_RFRST, 0); |
| if (!ret) |
| udelay(SET_CHANNEL_DELAY_US); /* per datasheet */ |
| |
| return ret; |
| } |
| |
| static int mrf24j40_filter(struct ieee802154_hw *hw, |
| struct ieee802154_hw_addr_filt *filt, |
| unsigned long changed) |
| { |
| struct mrf24j40 *devrec = hw->priv; |
| |
| dev_dbg(printdev(devrec), "filter\n"); |
| |
| if (changed & IEEE802154_AFILT_SADDR_CHANGED) { |
| /* Short Addr */ |
| u8 addrh, addrl; |
| |
| addrh = le16_to_cpu(filt->short_addr) >> 8 & 0xff; |
| addrl = le16_to_cpu(filt->short_addr) & 0xff; |
| |
| regmap_write(devrec->regmap_short, REG_SADRH, addrh); |
| regmap_write(devrec->regmap_short, REG_SADRL, addrl); |
| dev_dbg(printdev(devrec), |
| "Set short addr to %04hx\n", filt->short_addr); |
| } |
| |
| if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) { |
| /* Device Address */ |
| u8 i, addr[8]; |
| |
| memcpy(addr, &filt->ieee_addr, 8); |
| for (i = 0; i < 8; i++) |
| regmap_write(devrec->regmap_short, REG_EADR0 + i, |
| addr[i]); |
| |
| #ifdef DEBUG |
| pr_debug("Set long addr to: "); |
| for (i = 0; i < 8; i++) |
| pr_debug("%02hhx ", addr[7 - i]); |
| pr_debug("\n"); |
| #endif |
| } |
| |
| if (changed & IEEE802154_AFILT_PANID_CHANGED) { |
| /* PAN ID */ |
| u8 panidl, panidh; |
| |
| panidh = le16_to_cpu(filt->pan_id) >> 8 & 0xff; |
| panidl = le16_to_cpu(filt->pan_id) & 0xff; |
| regmap_write(devrec->regmap_short, REG_PANIDH, panidh); |
| regmap_write(devrec->regmap_short, REG_PANIDL, panidl); |
| |
| dev_dbg(printdev(devrec), "Set PANID to %04hx\n", filt->pan_id); |
| } |
| |
| if (changed & IEEE802154_AFILT_PANC_CHANGED) { |
| /* Pan Coordinator */ |
| u8 val; |
| int ret; |
| |
| if (filt->pan_coord) |
| val = BIT_PANCOORD; |
| else |
| val = 0; |
| ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, |
| BIT_PANCOORD, val); |
| if (ret) |
| return ret; |
| |
| /* REG_SLOTTED is maintained as default (unslotted/CSMA-CA). |
| * REG_ORDER is maintained as default (no beacon/superframe). |
| */ |
| |
| dev_dbg(printdev(devrec), "Set Pan Coord to %s\n", |
| filt->pan_coord ? "on" : "off"); |
| } |
| |
| return 0; |
| } |
| |
| static void mrf24j40_handle_rx_read_buf_unlock(struct mrf24j40 *devrec) |
| { |
| int ret; |
| |
| /* Turn back on reception of packets off the air. */ |
| devrec->rx_msg.complete = NULL; |
| devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1); |
| devrec->rx_buf[1] = 0x00; /* CLR RXDECINV */ |
| ret = spi_async(devrec->spi, &devrec->rx_msg); |
| if (ret) |
| dev_err(printdev(devrec), "failed to unlock rx buffer\n"); |
| } |
| |
| static void mrf24j40_handle_rx_read_buf_complete(void *context) |
| { |
| struct mrf24j40 *devrec = context; |
| u8 len = devrec->rx_buf[2]; |
| u8 rx_local_buf[RX_FIFO_SIZE]; |
| struct sk_buff *skb; |
| |
| memcpy(rx_local_buf, devrec->rx_fifo_buf, len); |
| mrf24j40_handle_rx_read_buf_unlock(devrec); |
| |
| skb = dev_alloc_skb(IEEE802154_MTU); |
| if (!skb) { |
| dev_err(printdev(devrec), "failed to allocate skb\n"); |
| return; |
| } |
| |
| memcpy(skb_put(skb, len), rx_local_buf, len); |
| ieee802154_rx_irqsafe(devrec->hw, skb, 0); |
| |
| #ifdef DEBUG |
| print_hex_dump(KERN_DEBUG, "mrf24j40 rx: ", DUMP_PREFIX_OFFSET, 16, 1, |
| rx_local_buf, len, 0); |
| pr_debug("mrf24j40 rx: lqi: %02hhx rssi: %02hhx\n", |
| devrec->rx_lqi_buf[0], devrec->rx_lqi_buf[1]); |
| #endif |
| } |
| |
| static void mrf24j40_handle_rx_read_buf(void *context) |
| { |
| struct mrf24j40 *devrec = context; |
| u16 cmd; |
| int ret; |
| |
| /* if length is invalid read the full MTU */ |
| if (!ieee802154_is_valid_psdu_len(devrec->rx_buf[2])) |
| devrec->rx_buf[2] = IEEE802154_MTU; |
| |
| cmd = MRF24J40_READLONG(REG_RX_FIFO + 1); |
| devrec->rx_addr_buf[0] = cmd >> 8 & 0xff; |
| devrec->rx_addr_buf[1] = cmd & 0xff; |
| devrec->rx_fifo_buf_trx.len = devrec->rx_buf[2]; |
| ret = spi_async(devrec->spi, &devrec->rx_buf_msg); |
| if (ret) { |
| dev_err(printdev(devrec), "failed to read rx buffer\n"); |
| mrf24j40_handle_rx_read_buf_unlock(devrec); |
| } |
| } |
| |
| static void mrf24j40_handle_rx_read_len(void *context) |
| { |
| struct mrf24j40 *devrec = context; |
| u16 cmd; |
| int ret; |
| |
| /* read the length of received frame */ |
| devrec->rx_msg.complete = mrf24j40_handle_rx_read_buf; |
| devrec->rx_trx.len = 3; |
| cmd = MRF24J40_READLONG(REG_RX_FIFO); |
| devrec->rx_buf[0] = cmd >> 8 & 0xff; |
| devrec->rx_buf[1] = cmd & 0xff; |
| |
| ret = spi_async(devrec->spi, &devrec->rx_msg); |
| if (ret) { |
| dev_err(printdev(devrec), "failed to read rx buffer length\n"); |
| mrf24j40_handle_rx_read_buf_unlock(devrec); |
| } |
| } |
| |
| static int mrf24j40_handle_rx(struct mrf24j40 *devrec) |
| { |
| /* Turn off reception of packets off the air. This prevents the |
| * device from overwriting the buffer while we're reading it. |
| */ |
| devrec->rx_msg.complete = mrf24j40_handle_rx_read_len; |
| devrec->rx_trx.len = 2; |
| devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1); |
| devrec->rx_buf[1] = BIT_RXDECINV; /* SET RXDECINV */ |
| |
| return spi_async(devrec->spi, &devrec->rx_msg); |
| } |
| |
| static int |
| mrf24j40_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be, |
| u8 retries) |
| { |
| struct mrf24j40 *devrec = hw->priv; |
| u8 val; |
| |
| /* min_be */ |
| val = min_be << TXMCR_MIN_BE_SHIFT; |
| /* csma backoffs */ |
| val |= retries << TXMCR_CSMA_RETRIES_SHIFT; |
| |
| return regmap_update_bits(devrec->regmap_short, REG_TXMCR, |
| TXMCR_MIN_BE_MASK | TXMCR_CSMA_RETRIES_MASK, |
| val); |
| } |
| |
| static int mrf24j40_set_cca_mode(struct ieee802154_hw *hw, |
| const struct wpan_phy_cca *cca) |
| { |
| struct mrf24j40 *devrec = hw->priv; |
| u8 val; |
| |
| /* mapping 802.15.4 to driver spec */ |
| switch (cca->mode) { |
| case NL802154_CCA_ENERGY: |
| val = 2; |
| break; |
| case NL802154_CCA_CARRIER: |
| val = 1; |
| break; |
| case NL802154_CCA_ENERGY_CARRIER: |
| switch (cca->opt) { |
| case NL802154_CCA_OPT_ENERGY_CARRIER_AND: |
| val = 3; |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return regmap_update_bits(devrec->regmap_short, REG_BBREG2, |
| BBREG2_CCA_MODE_MASK, |
| val << BBREG2_CCA_MODE_SHIFT); |
| } |
| |
| /* array for representing ed levels */ |
| static const s32 mrf24j40_ed_levels[] = { |
| -9000, -8900, -8800, -8700, -8600, -8500, -8400, -8300, -8200, -8100, |
| -8000, -7900, -7800, -7700, -7600, -7500, -7400, -7300, -7200, -7100, |
| -7000, -6900, -6800, -6700, -6600, -6500, -6400, -6300, -6200, -6100, |
| -6000, -5900, -5800, -5700, -5600, -5500, -5400, -5300, -5200, -5100, |
| -5000, -4900, -4800, -4700, -4600, -4500, -4400, -4300, -4200, -4100, |
| -4000, -3900, -3800, -3700, -3600, -3500 |
| }; |
| |
| /* map ed levels to register value */ |
| static const s32 mrf24j40_ed_levels_map[][2] = { |
| { -9000, 0 }, { -8900, 1 }, { -8800, 2 }, { -8700, 5 }, { -8600, 9 }, |
| { -8500, 13 }, { -8400, 18 }, { -8300, 23 }, { -8200, 27 }, |
| { -8100, 32 }, { -8000, 37 }, { -7900, 43 }, { -7800, 48 }, |
| { -7700, 53 }, { -7600, 58 }, { -7500, 63 }, { -7400, 68 }, |
| { -7300, 73 }, { -7200, 78 }, { -7100, 83 }, { -7000, 89 }, |
| { -6900, 95 }, { -6800, 100 }, { -6700, 107 }, { -6600, 111 }, |
| { -6500, 117 }, { -6400, 121 }, { -6300, 125 }, { -6200, 129 }, |
| { -6100, 133 }, { -6000, 138 }, { -5900, 143 }, { -5800, 148 }, |
| { -5700, 153 }, { -5600, 159 }, { -5500, 165 }, { -5400, 170 }, |
| { -5300, 176 }, { -5200, 183 }, { -5100, 188 }, { -5000, 193 }, |
| { -4900, 198 }, { -4800, 203 }, { -4700, 207 }, { -4600, 212 }, |
| { -4500, 216 }, { -4400, 221 }, { -4300, 225 }, { -4200, 228 }, |
| { -4100, 233 }, { -4000, 239 }, { -3900, 245 }, { -3800, 250 }, |
| { -3700, 253 }, { -3600, 254 }, { -3500, 255 }, |
| }; |
| |
| static int mrf24j40_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm) |
| { |
| struct mrf24j40 *devrec = hw->priv; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(mrf24j40_ed_levels_map); i++) { |
| if (mrf24j40_ed_levels_map[i][0] == mbm) |
| return regmap_write(devrec->regmap_short, REG_CCAEDTH, |
| mrf24j40_ed_levels_map[i][1]); |
| } |
| |
| return -EINVAL; |
| } |
| |
| static const s32 mrf24j40ma_powers[] = { |
| 0, -50, -120, -190, -280, -370, -490, -630, -1000, -1050, -1120, -1190, |
| -1280, -1370, -1490, -1630, -2000, -2050, -2120, -2190, -2280, -2370, |
| -2490, -2630, -3000, -3050, -3120, -3190, -3280, -3370, -3490, -3630, |
| }; |
| |
| static int mrf24j40_set_txpower(struct ieee802154_hw *hw, s32 mbm) |
| { |
| struct mrf24j40 *devrec = hw->priv; |
| s32 small_scale; |
| u8 val; |
| |
| if (0 >= mbm && mbm > -1000) { |
| val = TXPWRL_0 << TXPWRL_SHIFT; |
| small_scale = mbm; |
| } else if (-1000 >= mbm && mbm > -2000) { |
| val = TXPWRL_10 << TXPWRL_SHIFT; |
| small_scale = mbm + 1000; |
| } else if (-2000 >= mbm && mbm > -3000) { |
| val = TXPWRL_20 << TXPWRL_SHIFT; |
| small_scale = mbm + 2000; |
| } else if (-3000 >= mbm && mbm > -4000) { |
| val = TXPWRL_30 << TXPWRL_SHIFT; |
| small_scale = mbm + 3000; |
| } else { |
| return -EINVAL; |
| } |
| |
| switch (small_scale) { |
| case 0: |
| val |= (TXPWRS_0 << TXPWRS_SHIFT); |
| break; |
| case -50: |
| val |= (TXPWRS_0_5 << TXPWRS_SHIFT); |
| break; |
| case -120: |
| val |= (TXPWRS_1_2 << TXPWRS_SHIFT); |
| break; |
| case -190: |
| val |= (TXPWRS_1_9 << TXPWRS_SHIFT); |
| break; |
| case -280: |
| val |= (TXPWRS_2_8 << TXPWRS_SHIFT); |
| break; |
| case -370: |
| val |= (TXPWRS_3_7 << TXPWRS_SHIFT); |
| break; |
| case -490: |
| val |= (TXPWRS_4_9 << TXPWRS_SHIFT); |
| break; |
| case -630: |
| val |= (TXPWRS_6_3 << TXPWRS_SHIFT); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return regmap_update_bits(devrec->regmap_long, REG_RFCON3, |
| TXPWRL_MASK | TXPWRS_MASK, val); |
| } |
| |
| static int mrf24j40_set_promiscuous_mode(struct ieee802154_hw *hw, bool on) |
| { |
| struct mrf24j40 *devrec = hw->priv; |
| int ret; |
| |
| if (on) { |
| /* set PROMI, ERRPKT and NOACKRSP */ |
| ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, |
| BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP, |
| BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP); |
| } else { |
| /* clear PROMI, ERRPKT and NOACKRSP */ |
| ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, |
| BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP, |
| 0); |
| } |
| |
| return ret; |
| } |
| |
| static const struct ieee802154_ops mrf24j40_ops = { |
| .owner = THIS_MODULE, |
| .xmit_async = mrf24j40_tx, |
| .ed = mrf24j40_ed, |
| .start = mrf24j40_start, |
| .stop = mrf24j40_stop, |
| .set_channel = mrf24j40_set_channel, |
| .set_hw_addr_filt = mrf24j40_filter, |
| .set_csma_params = mrf24j40_csma_params, |
| .set_cca_mode = mrf24j40_set_cca_mode, |
| .set_cca_ed_level = mrf24j40_set_cca_ed_level, |
| .set_txpower = mrf24j40_set_txpower, |
| .set_promiscuous_mode = mrf24j40_set_promiscuous_mode, |
| }; |
| |
| static void mrf24j40_intstat_complete(void *context) |
| { |
| struct mrf24j40 *devrec = context; |
| u8 intstat = devrec->irq_buf[1]; |
| |
| enable_irq(devrec->spi->irq); |
| |
| /* Ignore Rx security decryption */ |
| if (intstat & BIT_SECIF) |
| regmap_write_async(devrec->regmap_short, REG_SECCON0, |
| BIT_SECIGNORE); |
| |
| /* Check for TX complete */ |
| if (intstat & BIT_TXNIF) |
| ieee802154_xmit_complete(devrec->hw, devrec->tx_skb, false); |
| |
| /* Check for Rx */ |
| if (intstat & BIT_RXIF) |
| mrf24j40_handle_rx(devrec); |
| } |
| |
| static irqreturn_t mrf24j40_isr(int irq, void *data) |
| { |
| struct mrf24j40 *devrec = data; |
| int ret; |
| |
| disable_irq_nosync(irq); |
| |
| devrec->irq_buf[0] = MRF24J40_READSHORT(REG_INTSTAT); |
| devrec->irq_buf[1] = 0; |
| |
| /* Read the interrupt status */ |
| ret = spi_async(devrec->spi, &devrec->irq_msg); |
| if (ret) { |
| enable_irq(irq); |
| return IRQ_NONE; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int mrf24j40_hw_init(struct mrf24j40 *devrec) |
| { |
| u32 irq_type; |
| int ret; |
| |
| /* Initialize the device. |
| From datasheet section 3.2: Initialization. */ |
| ret = regmap_write(devrec->regmap_short, REG_SOFTRST, 0x07); |
| if (ret) |
| goto err_ret; |
| |
| ret = regmap_write(devrec->regmap_short, REG_PACON2, 0x98); |
| if (ret) |
| goto err_ret; |
| |
| ret = regmap_write(devrec->regmap_short, REG_TXSTBL, 0x95); |
| if (ret) |
| goto err_ret; |
| |
| ret = regmap_write(devrec->regmap_long, REG_RFCON0, 0x03); |
| if (ret) |
| goto err_ret; |
| |
| ret = regmap_write(devrec->regmap_long, REG_RFCON1, 0x01); |
| if (ret) |
| goto err_ret; |
| |
| ret = regmap_write(devrec->regmap_long, REG_RFCON2, 0x80); |
| if (ret) |
| goto err_ret; |
| |
| ret = regmap_write(devrec->regmap_long, REG_RFCON6, 0x90); |
| if (ret) |
| goto err_ret; |
| |
| ret = regmap_write(devrec->regmap_long, REG_RFCON7, 0x80); |
| if (ret) |
| goto err_ret; |
| |
| ret = regmap_write(devrec->regmap_long, REG_RFCON8, 0x10); |
| if (ret) |
| goto err_ret; |
| |
| ret = regmap_write(devrec->regmap_long, REG_SLPCON1, 0x21); |
| if (ret) |
| goto err_ret; |
| |
| ret = regmap_write(devrec->regmap_short, REG_BBREG2, 0x80); |
| if (ret) |
| goto err_ret; |
| |
| ret = regmap_write(devrec->regmap_short, REG_CCAEDTH, 0x60); |
| if (ret) |
| goto err_ret; |
| |
| ret = regmap_write(devrec->regmap_short, REG_BBREG6, 0x40); |
| if (ret) |
| goto err_ret; |
| |
| ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x04); |
| if (ret) |
| goto err_ret; |
| |
| ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x0); |
| if (ret) |
| goto err_ret; |
| |
| udelay(192); |
| |
| /* Set RX Mode. RXMCR<1:0>: 0x0 normal, 0x1 promisc, 0x2 error */ |
| ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 0x03, 0x00); |
| if (ret) |
| goto err_ret; |
| |
| if (spi_get_device_id(devrec->spi)->driver_data == MRF24J40MC) { |
| /* Enable external amplifier. |
| * From MRF24J40MC datasheet section 1.3: Operation. |
| */ |
| regmap_update_bits(devrec->regmap_long, REG_TESTMODE, 0x07, |
| 0x07); |
| |
| /* Set GPIO3 as output. */ |
| regmap_update_bits(devrec->regmap_short, REG_TRISGPIO, 0x08, |
| 0x08); |
| |
| /* Set GPIO3 HIGH to enable U5 voltage regulator */ |
| regmap_update_bits(devrec->regmap_short, REG_GPIO, 0x08, 0x08); |
| |
| /* Reduce TX pwr to meet FCC requirements. |
| * From MRF24J40MC datasheet section 3.1.1 |
| */ |
| regmap_write(devrec->regmap_long, REG_RFCON3, 0x28); |
| } |
| |
| irq_type = irq_get_trigger_type(devrec->spi->irq); |
| if (irq_type == IRQ_TYPE_EDGE_RISING || |
| irq_type == IRQ_TYPE_EDGE_FALLING) |
| dev_warn(&devrec->spi->dev, |
| "Using edge triggered irq's are not recommended, because it can cause races and result in a non-functional driver!\n"); |
| switch (irq_type) { |
| case IRQ_TYPE_EDGE_RISING: |
| case IRQ_TYPE_LEVEL_HIGH: |
| /* set interrupt polarity to rising */ |
| ret = regmap_update_bits(devrec->regmap_long, REG_SLPCON0, |
| BIT_INTEDGE, BIT_INTEDGE); |
| if (ret) |
| goto err_ret; |
| break; |
| default: |
| /* default is falling edge */ |
| break; |
| } |
| |
| return 0; |
| |
| err_ret: |
| return ret; |
| } |
| |
| static void |
| mrf24j40_setup_tx_spi_messages(struct mrf24j40 *devrec) |
| { |
| spi_message_init(&devrec->tx_msg); |
| devrec->tx_msg.context = devrec; |
| devrec->tx_msg.complete = write_tx_buf_complete; |
| devrec->tx_hdr_trx.len = 2; |
| devrec->tx_hdr_trx.tx_buf = devrec->tx_hdr_buf; |
| spi_message_add_tail(&devrec->tx_hdr_trx, &devrec->tx_msg); |
| devrec->tx_len_trx.len = 2; |
| devrec->tx_len_trx.tx_buf = devrec->tx_len_buf; |
| spi_message_add_tail(&devrec->tx_len_trx, &devrec->tx_msg); |
| spi_message_add_tail(&devrec->tx_buf_trx, &devrec->tx_msg); |
| |
| spi_message_init(&devrec->tx_post_msg); |
| devrec->tx_post_msg.context = devrec; |
| devrec->tx_post_trx.len = 2; |
| devrec->tx_post_trx.tx_buf = devrec->tx_post_buf; |
| spi_message_add_tail(&devrec->tx_post_trx, &devrec->tx_post_msg); |
| } |
| |
| static void |
| mrf24j40_setup_rx_spi_messages(struct mrf24j40 *devrec) |
| { |
| spi_message_init(&devrec->rx_msg); |
| devrec->rx_msg.context = devrec; |
| devrec->rx_trx.len = 2; |
| devrec->rx_trx.tx_buf = devrec->rx_buf; |
| devrec->rx_trx.rx_buf = devrec->rx_buf; |
| spi_message_add_tail(&devrec->rx_trx, &devrec->rx_msg); |
| |
| spi_message_init(&devrec->rx_buf_msg); |
| devrec->rx_buf_msg.context = devrec; |
| devrec->rx_buf_msg.complete = mrf24j40_handle_rx_read_buf_complete; |
| devrec->rx_addr_trx.len = 2; |
| devrec->rx_addr_trx.tx_buf = devrec->rx_addr_buf; |
| spi_message_add_tail(&devrec->rx_addr_trx, &devrec->rx_buf_msg); |
| devrec->rx_fifo_buf_trx.rx_buf = devrec->rx_fifo_buf; |
| spi_message_add_tail(&devrec->rx_fifo_buf_trx, &devrec->rx_buf_msg); |
| devrec->rx_lqi_trx.len = 2; |
| devrec->rx_lqi_trx.rx_buf = devrec->rx_lqi_buf; |
| spi_message_add_tail(&devrec->rx_lqi_trx, &devrec->rx_buf_msg); |
| } |
| |
| static void |
| mrf24j40_setup_irq_spi_messages(struct mrf24j40 *devrec) |
| { |
| spi_message_init(&devrec->irq_msg); |
| devrec->irq_msg.context = devrec; |
| devrec->irq_msg.complete = mrf24j40_intstat_complete; |
| devrec->irq_trx.len = 2; |
| devrec->irq_trx.tx_buf = devrec->irq_buf; |
| devrec->irq_trx.rx_buf = devrec->irq_buf; |
| spi_message_add_tail(&devrec->irq_trx, &devrec->irq_msg); |
| } |
| |
| static void mrf24j40_phy_setup(struct mrf24j40 *devrec) |
| { |
| ieee802154_random_extended_addr(&devrec->hw->phy->perm_extended_addr); |
| devrec->hw->phy->current_channel = 11; |
| |
| /* mrf24j40 supports max_minbe 0 - 3 */ |
| devrec->hw->phy->supported.max_minbe = 3; |
| /* datasheet doesn't say anything about max_be, but we have min_be |
| * So we assume the max_be default. |
| */ |
| devrec->hw->phy->supported.min_maxbe = 5; |
| devrec->hw->phy->supported.max_maxbe = 5; |
| |
| devrec->hw->phy->cca.mode = NL802154_CCA_CARRIER; |
| devrec->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) | |
| BIT(NL802154_CCA_CARRIER) | |
| BIT(NL802154_CCA_ENERGY_CARRIER); |
| devrec->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND); |
| |
| devrec->hw->phy->cca_ed_level = -6900; |
| devrec->hw->phy->supported.cca_ed_levels = mrf24j40_ed_levels; |
| devrec->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(mrf24j40_ed_levels); |
| |
| switch (spi_get_device_id(devrec->spi)->driver_data) { |
| case MRF24J40: |
| case MRF24J40MA: |
| devrec->hw->phy->supported.tx_powers = mrf24j40ma_powers; |
| devrec->hw->phy->supported.tx_powers_size = ARRAY_SIZE(mrf24j40ma_powers); |
| devrec->hw->phy->flags |= WPAN_PHY_FLAG_TXPOWER; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static int mrf24j40_probe(struct spi_device *spi) |
| { |
| int ret = -ENOMEM, irq_type; |
| struct ieee802154_hw *hw; |
| struct mrf24j40 *devrec; |
| |
| dev_info(&spi->dev, "probe(). IRQ: %d\n", spi->irq); |
| |
| /* Register with the 802154 subsystem */ |
| |
| hw = ieee802154_alloc_hw(sizeof(*devrec), &mrf24j40_ops); |
| if (!hw) |
| goto err_ret; |
| |
| devrec = hw->priv; |
| devrec->spi = spi; |
| spi_set_drvdata(spi, devrec); |
| devrec->hw = hw; |
| devrec->hw->parent = &spi->dev; |
| devrec->hw->phy->supported.channels[0] = CHANNEL_MASK; |
| devrec->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT | |
| IEEE802154_HW_CSMA_PARAMS | |
| IEEE802154_HW_PROMISCUOUS; |
| |
| devrec->hw->phy->flags = WPAN_PHY_FLAG_CCA_MODE | |
| WPAN_PHY_FLAG_CCA_ED_LEVEL; |
| |
| mrf24j40_setup_tx_spi_messages(devrec); |
| mrf24j40_setup_rx_spi_messages(devrec); |
| mrf24j40_setup_irq_spi_messages(devrec); |
| |
| devrec->regmap_short = devm_regmap_init_spi(spi, |
| &mrf24j40_short_regmap); |
| if (IS_ERR(devrec->regmap_short)) { |
| ret = PTR_ERR(devrec->regmap_short); |
| dev_err(&spi->dev, "Failed to allocate short register map: %d\n", |
| ret); |
| goto err_register_device; |
| } |
| |
| devrec->regmap_long = devm_regmap_init(&spi->dev, |
| &mrf24j40_long_regmap_bus, |
| spi, &mrf24j40_long_regmap); |
| if (IS_ERR(devrec->regmap_long)) { |
| ret = PTR_ERR(devrec->regmap_long); |
| dev_err(&spi->dev, "Failed to allocate long register map: %d\n", |
| ret); |
| goto err_register_device; |
| } |
| |
| if (spi->max_speed_hz > MAX_SPI_SPEED_HZ) { |
| dev_warn(&spi->dev, "spi clock above possible maximum: %d", |
| MAX_SPI_SPEED_HZ); |
| return -EINVAL; |
| } |
| |
| ret = mrf24j40_hw_init(devrec); |
| if (ret) |
| goto err_register_device; |
| |
| mrf24j40_phy_setup(devrec); |
| |
| /* request IRQF_TRIGGER_LOW as fallback default */ |
| irq_type = irq_get_trigger_type(spi->irq); |
| if (!irq_type) |
| irq_type = IRQF_TRIGGER_LOW; |
| |
| ret = devm_request_irq(&spi->dev, spi->irq, mrf24j40_isr, |
| irq_type, dev_name(&spi->dev), devrec); |
| if (ret) { |
| dev_err(printdev(devrec), "Unable to get IRQ"); |
| goto err_register_device; |
| } |
| |
| dev_dbg(printdev(devrec), "registered mrf24j40\n"); |
| ret = ieee802154_register_hw(devrec->hw); |
| if (ret) |
| goto err_register_device; |
| |
| return 0; |
| |
| err_register_device: |
| ieee802154_free_hw(devrec->hw); |
| err_ret: |
| return ret; |
| } |
| |
| static int mrf24j40_remove(struct spi_device *spi) |
| { |
| struct mrf24j40 *devrec = spi_get_drvdata(spi); |
| |
| dev_dbg(printdev(devrec), "remove\n"); |
| |
| ieee802154_unregister_hw(devrec->hw); |
| ieee802154_free_hw(devrec->hw); |
| /* TODO: Will ieee802154_free_device() wait until ->xmit() is |
| * complete? */ |
| |
| return 0; |
| } |
| |
| static const struct of_device_id mrf24j40_of_match[] = { |
| { .compatible = "microchip,mrf24j40", .data = (void *)MRF24J40 }, |
| { .compatible = "microchip,mrf24j40ma", .data = (void *)MRF24J40MA }, |
| { .compatible = "microchip,mrf24j40mc", .data = (void *)MRF24J40MC }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, mrf24j40_of_match); |
| |
| static const struct spi_device_id mrf24j40_ids[] = { |
| { "mrf24j40", MRF24J40 }, |
| { "mrf24j40ma", MRF24J40MA }, |
| { "mrf24j40mc", MRF24J40MC }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(spi, mrf24j40_ids); |
| |
| static struct spi_driver mrf24j40_driver = { |
| .driver = { |
| .of_match_table = of_match_ptr(mrf24j40_of_match), |
| .name = "mrf24j40", |
| }, |
| .id_table = mrf24j40_ids, |
| .probe = mrf24j40_probe, |
| .remove = mrf24j40_remove, |
| }; |
| |
| module_spi_driver(mrf24j40_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Alan Ott"); |
| MODULE_DESCRIPTION("MRF24J40 SPI 802.15.4 Controller Driver"); |