| Zevio GPIO controller | |
| Required properties: | |
| - compatible: Should be "lsi,zevio-gpio" | |
| - reg: Address and length of the register set for the device | |
| - #gpio-cells: Should be two. The first cell is the pin number and the | |
| second cell is used to specify optional parameters (currently unused). | |
| - gpio-controller: Marks the device node as a GPIO controller. | |
| Example: | |
| gpio: gpio@90000000 { | |
| compatible = "lsi,zevio-gpio"; | |
| reg = <0x90000000 0x1000>; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| }; |