| /* |
| * FSI core driver |
| * |
| * Copyright (C) IBM Corporation 2016 |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/crc4.h> |
| #include <linux/device.h> |
| #include <linux/fsi.h> |
| #include <linux/idr.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/bitops.h> |
| |
| #include "fsi-master.h" |
| |
| #define CREATE_TRACE_POINTS |
| #include <trace/events/fsi.h> |
| |
| #define FSI_SLAVE_CONF_NEXT_MASK GENMASK(31, 31) |
| #define FSI_SLAVE_CONF_SLOTS_MASK GENMASK(23, 16) |
| #define FSI_SLAVE_CONF_SLOTS_SHIFT 16 |
| #define FSI_SLAVE_CONF_VERSION_MASK GENMASK(15, 12) |
| #define FSI_SLAVE_CONF_VERSION_SHIFT 12 |
| #define FSI_SLAVE_CONF_TYPE_MASK GENMASK(11, 4) |
| #define FSI_SLAVE_CONF_TYPE_SHIFT 4 |
| #define FSI_SLAVE_CONF_CRC_SHIFT 4 |
| #define FSI_SLAVE_CONF_CRC_MASK GENMASK(3, 0) |
| #define FSI_SLAVE_CONF_DATA_BITS 28 |
| |
| #define FSI_PEEK_BASE 0x410 |
| |
| static const int engine_page_size = 0x400; |
| |
| #define FSI_SLAVE_BASE 0x800 |
| |
| /* |
| * FSI slave engine control register offsets |
| */ |
| #define FSI_SMODE 0x0 /* R/W: Mode register */ |
| #define FSI_SISC 0x8 /* R/W: Interrupt condition */ |
| #define FSI_SSTAT 0x14 /* R : Slave status */ |
| #define FSI_LLMODE 0x100 /* R/W: Link layer mode register */ |
| |
| /* |
| * SMODE fields |
| */ |
| #define FSI_SMODE_WSC 0x80000000 /* Warm start done */ |
| #define FSI_SMODE_ECRC 0x20000000 /* Hw CRC check */ |
| #define FSI_SMODE_SID_SHIFT 24 /* ID shift */ |
| #define FSI_SMODE_SID_MASK 3 /* ID Mask */ |
| #define FSI_SMODE_ED_SHIFT 20 /* Echo delay shift */ |
| #define FSI_SMODE_ED_MASK 0xf /* Echo delay mask */ |
| #define FSI_SMODE_SD_SHIFT 16 /* Send delay shift */ |
| #define FSI_SMODE_SD_MASK 0xf /* Send delay mask */ |
| #define FSI_SMODE_LBCRR_SHIFT 8 /* Clk ratio shift */ |
| #define FSI_SMODE_LBCRR_MASK 0xf /* Clk ratio mask */ |
| |
| /* |
| * LLMODE fields |
| */ |
| #define FSI_LLMODE_ASYNC 0x1 |
| |
| #define FSI_SLAVE_SIZE_23b 0x800000 |
| |
| static DEFINE_IDA(master_ida); |
| |
| struct fsi_slave { |
| struct device dev; |
| struct fsi_master *master; |
| int id; |
| int link; |
| uint32_t size; /* size of slave address space */ |
| }; |
| |
| #define to_fsi_master(d) container_of(d, struct fsi_master, dev) |
| #define to_fsi_slave(d) container_of(d, struct fsi_slave, dev) |
| |
| static const int slave_retries = 2; |
| static int discard_errors; |
| |
| static int fsi_master_read(struct fsi_master *master, int link, |
| uint8_t slave_id, uint32_t addr, void *val, size_t size); |
| static int fsi_master_write(struct fsi_master *master, int link, |
| uint8_t slave_id, uint32_t addr, const void *val, size_t size); |
| static int fsi_master_break(struct fsi_master *master, int link); |
| |
| /* |
| * fsi_device_read() / fsi_device_write() / fsi_device_peek() |
| * |
| * FSI endpoint-device support |
| * |
| * Read / write / peek accessors for a client |
| * |
| * Parameters: |
| * dev: Structure passed to FSI client device drivers on probe(). |
| * addr: FSI address of given device. Client should pass in its base address |
| * plus desired offset to access its register space. |
| * val: For read/peek this is the value read at the specified address. For |
| * write this is value to write to the specified address. |
| * The data in val must be FSI bus endian (big endian). |
| * size: Size in bytes of the operation. Sizes supported are 1, 2 and 4 bytes. |
| * Addresses must be aligned on size boundaries or an error will result. |
| */ |
| int fsi_device_read(struct fsi_device *dev, uint32_t addr, void *val, |
| size_t size) |
| { |
| if (addr > dev->size || size > dev->size || addr > dev->size - size) |
| return -EINVAL; |
| |
| return fsi_slave_read(dev->slave, dev->addr + addr, val, size); |
| } |
| EXPORT_SYMBOL_GPL(fsi_device_read); |
| |
| int fsi_device_write(struct fsi_device *dev, uint32_t addr, const void *val, |
| size_t size) |
| { |
| if (addr > dev->size || size > dev->size || addr > dev->size - size) |
| return -EINVAL; |
| |
| return fsi_slave_write(dev->slave, dev->addr + addr, val, size); |
| } |
| EXPORT_SYMBOL_GPL(fsi_device_write); |
| |
| int fsi_device_peek(struct fsi_device *dev, void *val) |
| { |
| uint32_t addr = FSI_PEEK_BASE + ((dev->unit - 2) * sizeof(uint32_t)); |
| |
| return fsi_slave_read(dev->slave, addr, val, sizeof(uint32_t)); |
| } |
| |
| static void fsi_device_release(struct device *_device) |
| { |
| struct fsi_device *device = to_fsi_dev(_device); |
| |
| kfree(device); |
| } |
| |
| static struct fsi_device *fsi_create_device(struct fsi_slave *slave) |
| { |
| struct fsi_device *dev; |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) |
| return NULL; |
| |
| dev->dev.parent = &slave->dev; |
| dev->dev.bus = &fsi_bus_type; |
| dev->dev.release = fsi_device_release; |
| |
| return dev; |
| } |
| |
| /* FSI slave support */ |
| static int fsi_slave_calc_addr(struct fsi_slave *slave, uint32_t *addrp, |
| uint8_t *idp) |
| { |
| uint32_t addr = *addrp; |
| uint8_t id = *idp; |
| |
| if (addr > slave->size) |
| return -EINVAL; |
| |
| /* For 23 bit addressing, we encode the extra two bits in the slave |
| * id (and the slave's actual ID needs to be 0). |
| */ |
| if (addr > 0x1fffff) { |
| if (slave->id != 0) |
| return -EINVAL; |
| id = (addr >> 21) & 0x3; |
| addr &= 0x1fffff; |
| } |
| |
| *addrp = addr; |
| *idp = id; |
| return 0; |
| } |
| |
| int fsi_slave_report_and_clear_errors(struct fsi_slave *slave) |
| { |
| struct fsi_master *master = slave->master; |
| uint32_t irq, stat; |
| int rc, link; |
| uint8_t id; |
| |
| link = slave->link; |
| id = slave->id; |
| |
| rc = fsi_master_read(master, link, id, FSI_SLAVE_BASE + FSI_SISC, |
| &irq, sizeof(irq)); |
| if (rc) |
| return rc; |
| |
| rc = fsi_master_read(master, link, id, FSI_SLAVE_BASE + FSI_SSTAT, |
| &stat, sizeof(stat)); |
| if (rc) |
| return rc; |
| |
| dev_info(&slave->dev, "status: 0x%08x, sisc: 0x%08x\n", |
| be32_to_cpu(stat), be32_to_cpu(irq)); |
| |
| /* clear interrupts */ |
| return fsi_master_write(master, link, id, FSI_SLAVE_BASE + FSI_SISC, |
| &irq, sizeof(irq)); |
| } |
| |
| static int fsi_slave_set_smode(struct fsi_master *master, int link, int id); |
| |
| int fsi_slave_handle_error(struct fsi_slave *slave, bool write, uint32_t addr, |
| size_t size) |
| { |
| struct fsi_master *master = slave->master; |
| int rc, link; |
| uint32_t reg; |
| uint8_t id; |
| |
| if (discard_errors) |
| return -1; |
| |
| link = slave->link; |
| id = slave->id; |
| |
| dev_dbg(&slave->dev, "handling error on %s to 0x%08x[%zd]", |
| write ? "write" : "read", addr, size); |
| |
| /* try a simple clear of error conditions, which may fail if we've lost |
| * communication with the slave |
| */ |
| rc = fsi_slave_report_and_clear_errors(slave); |
| if (!rc) |
| return 0; |
| |
| /* send a TERM and retry */ |
| if (master->term) { |
| rc = master->term(master, link, id); |
| if (!rc) { |
| rc = fsi_master_read(master, link, id, 0, |
| ®, sizeof(reg)); |
| if (!rc) |
| rc = fsi_slave_report_and_clear_errors(slave); |
| if (!rc) |
| return 0; |
| } |
| } |
| |
| /* getting serious, reset the slave via BREAK */ |
| rc = fsi_master_break(master, link); |
| if (rc) |
| return rc; |
| |
| rc = fsi_slave_set_smode(master, link, id); |
| if (rc) |
| return rc; |
| |
| return fsi_slave_report_and_clear_errors(slave); |
| } |
| |
| int fsi_slave_read(struct fsi_slave *slave, uint32_t addr, |
| void *val, size_t size) |
| { |
| uint8_t id = slave->id; |
| int rc, err_rc, i; |
| |
| rc = fsi_slave_calc_addr(slave, &addr, &id); |
| if (rc) |
| return rc; |
| |
| for (i = 0; i < slave_retries; i++) { |
| rc = fsi_master_read(slave->master, slave->link, |
| id, addr, val, size); |
| if (!rc) |
| break; |
| |
| err_rc = fsi_slave_handle_error(slave, false, addr, size); |
| if (err_rc) |
| break; |
| } |
| |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(fsi_slave_read); |
| |
| int fsi_slave_write(struct fsi_slave *slave, uint32_t addr, |
| const void *val, size_t size) |
| { |
| uint8_t id = slave->id; |
| int rc, err_rc, i; |
| |
| rc = fsi_slave_calc_addr(slave, &addr, &id); |
| if (rc) |
| return rc; |
| |
| for (i = 0; i < slave_retries; i++) { |
| rc = fsi_master_write(slave->master, slave->link, |
| id, addr, val, size); |
| if (!rc) |
| break; |
| |
| err_rc = fsi_slave_handle_error(slave, true, addr, size); |
| if (err_rc) |
| break; |
| } |
| |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(fsi_slave_write); |
| |
| extern int fsi_slave_claim_range(struct fsi_slave *slave, |
| uint32_t addr, uint32_t size) |
| { |
| if (addr + size < addr) |
| return -EINVAL; |
| |
| if (addr + size > slave->size) |
| return -EINVAL; |
| |
| /* todo: check for overlapping claims */ |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(fsi_slave_claim_range); |
| |
| extern void fsi_slave_release_range(struct fsi_slave *slave, |
| uint32_t addr, uint32_t size) |
| { |
| } |
| EXPORT_SYMBOL_GPL(fsi_slave_release_range); |
| |
| static int fsi_slave_scan(struct fsi_slave *slave) |
| { |
| uint32_t engine_addr; |
| uint32_t conf; |
| int rc, i; |
| |
| /* |
| * scan engines |
| * |
| * We keep the peek mode and slave engines for the core; so start |
| * at the third slot in the configuration table. We also need to |
| * skip the chip ID entry at the start of the address space. |
| */ |
| engine_addr = engine_page_size * 3; |
| for (i = 2; i < engine_page_size / sizeof(uint32_t); i++) { |
| uint8_t slots, version, type, crc; |
| struct fsi_device *dev; |
| |
| rc = fsi_slave_read(slave, (i + 1) * sizeof(conf), |
| &conf, sizeof(conf)); |
| if (rc) { |
| dev_warn(&slave->dev, |
| "error reading slave registers\n"); |
| return -1; |
| } |
| conf = be32_to_cpu(conf); |
| |
| crc = crc4(0, conf, 32); |
| if (crc) { |
| dev_warn(&slave->dev, |
| "crc error in slave register at 0x%04x\n", |
| i); |
| return -1; |
| } |
| |
| slots = (conf & FSI_SLAVE_CONF_SLOTS_MASK) |
| >> FSI_SLAVE_CONF_SLOTS_SHIFT; |
| version = (conf & FSI_SLAVE_CONF_VERSION_MASK) |
| >> FSI_SLAVE_CONF_VERSION_SHIFT; |
| type = (conf & FSI_SLAVE_CONF_TYPE_MASK) |
| >> FSI_SLAVE_CONF_TYPE_SHIFT; |
| |
| /* |
| * Unused address areas are marked by a zero type value; this |
| * skips the defined address areas |
| */ |
| if (type != 0 && slots != 0) { |
| |
| /* create device */ |
| dev = fsi_create_device(slave); |
| if (!dev) |
| return -ENOMEM; |
| |
| dev->slave = slave; |
| dev->engine_type = type; |
| dev->version = version; |
| dev->unit = i; |
| dev->addr = engine_addr; |
| dev->size = slots * engine_page_size; |
| |
| dev_dbg(&slave->dev, |
| "engine[%i]: type %x, version %x, addr %x size %x\n", |
| dev->unit, dev->engine_type, version, |
| dev->addr, dev->size); |
| |
| dev_set_name(&dev->dev, "%02x:%02x:%02x:%02x", |
| slave->master->idx, slave->link, |
| slave->id, i - 2); |
| |
| rc = device_register(&dev->dev); |
| if (rc) { |
| dev_warn(&slave->dev, "add failed: %d\n", rc); |
| put_device(&dev->dev); |
| } |
| } |
| |
| engine_addr += slots * engine_page_size; |
| |
| if (!(conf & FSI_SLAVE_CONF_NEXT_MASK)) |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static ssize_t fsi_slave_sysfs_raw_read(struct file *file, |
| struct kobject *kobj, struct bin_attribute *attr, char *buf, |
| loff_t off, size_t count) |
| { |
| struct fsi_slave *slave = to_fsi_slave(kobj_to_dev(kobj)); |
| size_t total_len, read_len; |
| int rc; |
| |
| if (off < 0) |
| return -EINVAL; |
| |
| if (off > 0xffffffff || count > 0xffffffff || off + count > 0xffffffff) |
| return -EINVAL; |
| |
| for (total_len = 0; total_len < count; total_len += read_len) { |
| read_len = min_t(size_t, count, 4); |
| read_len -= off & 0x3; |
| |
| rc = fsi_slave_read(slave, off, buf + total_len, read_len); |
| if (rc) |
| return rc; |
| |
| off += read_len; |
| } |
| |
| return count; |
| } |
| |
| static ssize_t fsi_slave_sysfs_raw_write(struct file *file, |
| struct kobject *kobj, struct bin_attribute *attr, |
| char *buf, loff_t off, size_t count) |
| { |
| struct fsi_slave *slave = to_fsi_slave(kobj_to_dev(kobj)); |
| size_t total_len, write_len; |
| int rc; |
| |
| if (off < 0) |
| return -EINVAL; |
| |
| if (off > 0xffffffff || count > 0xffffffff || off + count > 0xffffffff) |
| return -EINVAL; |
| |
| for (total_len = 0; total_len < count; total_len += write_len) { |
| write_len = min_t(size_t, count, 4); |
| write_len -= off & 0x3; |
| |
| rc = fsi_slave_write(slave, off, buf + total_len, write_len); |
| if (rc) |
| return rc; |
| |
| off += write_len; |
| } |
| |
| return count; |
| } |
| |
| static const struct bin_attribute fsi_slave_raw_attr = { |
| .attr = { |
| .name = "raw", |
| .mode = 0600, |
| }, |
| .size = 0, |
| .read = fsi_slave_sysfs_raw_read, |
| .write = fsi_slave_sysfs_raw_write, |
| }; |
| |
| static ssize_t fsi_slave_sysfs_term_write(struct file *file, |
| struct kobject *kobj, struct bin_attribute *attr, |
| char *buf, loff_t off, size_t count) |
| { |
| struct fsi_slave *slave = to_fsi_slave(kobj_to_dev(kobj)); |
| struct fsi_master *master = slave->master; |
| |
| if (!master->term) |
| return -ENODEV; |
| |
| master->term(master, slave->link, slave->id); |
| return count; |
| } |
| |
| static const struct bin_attribute fsi_slave_term_attr = { |
| .attr = { |
| .name = "term", |
| .mode = 0200, |
| }, |
| .size = 0, |
| .write = fsi_slave_sysfs_term_write, |
| }; |
| |
| /* Encode slave local bus echo delay */ |
| static inline uint32_t fsi_smode_echodly(int x) |
| { |
| return (x & FSI_SMODE_ED_MASK) << FSI_SMODE_ED_SHIFT; |
| } |
| |
| /* Encode slave local bus send delay */ |
| static inline uint32_t fsi_smode_senddly(int x) |
| { |
| return (x & FSI_SMODE_SD_MASK) << FSI_SMODE_SD_SHIFT; |
| } |
| |
| /* Encode slave local bus clock rate ratio */ |
| static inline uint32_t fsi_smode_lbcrr(int x) |
| { |
| return (x & FSI_SMODE_LBCRR_MASK) << FSI_SMODE_LBCRR_SHIFT; |
| } |
| |
| /* Encode slave ID */ |
| static inline uint32_t fsi_smode_sid(int x) |
| { |
| return (x & FSI_SMODE_SID_MASK) << FSI_SMODE_SID_SHIFT; |
| } |
| |
| static uint32_t fsi_slave_smode(int id) |
| { |
| return FSI_SMODE_WSC | FSI_SMODE_ECRC |
| | fsi_smode_sid(id) |
| | fsi_smode_echodly(0xf) | fsi_smode_senddly(0xf) |
| | fsi_smode_lbcrr(0x8); |
| } |
| |
| static int fsi_slave_set_smode(struct fsi_master *master, int link, int id) |
| { |
| uint32_t smode; |
| |
| /* set our smode register with the slave ID field to 0; this enables |
| * extended slave addressing |
| */ |
| smode = fsi_slave_smode(id); |
| smode = cpu_to_be32(smode); |
| |
| return fsi_master_write(master, link, id, FSI_SLAVE_BASE + FSI_SMODE, |
| &smode, sizeof(smode)); |
| } |
| |
| static void fsi_slave_release(struct device *dev) |
| { |
| struct fsi_slave *slave = to_fsi_slave(dev); |
| |
| kfree(slave); |
| } |
| |
| static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id) |
| { |
| uint32_t chip_id, llmode; |
| struct fsi_slave *slave; |
| uint8_t crc; |
| int rc; |
| |
| /* Currently, we only support single slaves on a link, and use the |
| * full 23-bit address range |
| */ |
| if (id != 0) |
| return -EINVAL; |
| |
| rc = fsi_master_read(master, link, id, 0, &chip_id, sizeof(chip_id)); |
| if (rc) { |
| dev_dbg(&master->dev, "can't read slave %02x:%02x %d\n", |
| link, id, rc); |
| return -ENODEV; |
| } |
| chip_id = be32_to_cpu(chip_id); |
| |
| crc = crc4(0, chip_id, 32); |
| if (crc) { |
| dev_warn(&master->dev, "slave %02x:%02x invalid chip id CRC!\n", |
| link, id); |
| return -EIO; |
| } |
| |
| dev_info(&master->dev, "fsi: found chip %08x at %02x:%02x:%02x\n", |
| chip_id, master->idx, link, id); |
| |
| rc = fsi_slave_set_smode(master, link, id); |
| if (rc) { |
| dev_warn(&master->dev, |
| "can't set smode on slave:%02x:%02x %d\n", |
| link, id, rc); |
| return -ENODEV; |
| } |
| |
| /* If we're behind a master that doesn't provide a self-running bus |
| * clock, put the slave into async mode |
| */ |
| if (master->flags & FSI_MASTER_FLAG_SWCLOCK) { |
| llmode = cpu_to_be32(FSI_LLMODE_ASYNC); |
| rc = fsi_master_write(master, link, id, |
| FSI_SLAVE_BASE + FSI_LLMODE, |
| &llmode, sizeof(llmode)); |
| if (rc) |
| dev_warn(&master->dev, |
| "can't set llmode on slave:%02x:%02x %d\n", |
| link, id, rc); |
| } |
| |
| /* We can communicate with a slave; create the slave device and |
| * register. |
| */ |
| slave = kzalloc(sizeof(*slave), GFP_KERNEL); |
| if (!slave) |
| return -ENOMEM; |
| |
| slave->master = master; |
| slave->dev.parent = &master->dev; |
| slave->dev.release = fsi_slave_release; |
| slave->link = link; |
| slave->id = id; |
| slave->size = FSI_SLAVE_SIZE_23b; |
| |
| dev_set_name(&slave->dev, "slave@%02x:%02x", link, id); |
| rc = device_register(&slave->dev); |
| if (rc < 0) { |
| dev_warn(&master->dev, "failed to create slave device: %d\n", |
| rc); |
| put_device(&slave->dev); |
| return rc; |
| } |
| |
| rc = device_create_bin_file(&slave->dev, &fsi_slave_raw_attr); |
| if (rc) |
| dev_warn(&slave->dev, "failed to create raw attr: %d\n", rc); |
| |
| rc = device_create_bin_file(&slave->dev, &fsi_slave_term_attr); |
| if (rc) |
| dev_warn(&slave->dev, "failed to create term attr: %d\n", rc); |
| |
| rc = fsi_slave_scan(slave); |
| if (rc) |
| dev_dbg(&master->dev, "failed during slave scan with: %d\n", |
| rc); |
| |
| return rc; |
| } |
| |
| /* FSI master support */ |
| static int fsi_check_access(uint32_t addr, size_t size) |
| { |
| if (size != 1 && size != 2 && size != 4) |
| return -EINVAL; |
| |
| if ((addr & 0x3) != (size & 0x3)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int fsi_master_read(struct fsi_master *master, int link, |
| uint8_t slave_id, uint32_t addr, void *val, size_t size) |
| { |
| int rc; |
| |
| trace_fsi_master_read(master, link, slave_id, addr, size); |
| |
| rc = fsi_check_access(addr, size); |
| if (!rc) |
| rc = master->read(master, link, slave_id, addr, val, size); |
| |
| trace_fsi_master_rw_result(master, link, slave_id, addr, size, |
| false, val, rc); |
| |
| return rc; |
| } |
| |
| static int fsi_master_write(struct fsi_master *master, int link, |
| uint8_t slave_id, uint32_t addr, const void *val, size_t size) |
| { |
| int rc; |
| |
| trace_fsi_master_write(master, link, slave_id, addr, size, val); |
| |
| rc = fsi_check_access(addr, size); |
| if (!rc) |
| rc = master->write(master, link, slave_id, addr, val, size); |
| |
| trace_fsi_master_rw_result(master, link, slave_id, addr, size, |
| true, val, rc); |
| |
| return rc; |
| } |
| |
| static int fsi_master_link_enable(struct fsi_master *master, int link) |
| { |
| if (master->link_enable) |
| return master->link_enable(master, link); |
| |
| return 0; |
| } |
| |
| /* |
| * Issue a break command on this link |
| */ |
| static int fsi_master_break(struct fsi_master *master, int link) |
| { |
| trace_fsi_master_break(master, link); |
| |
| if (master->send_break) |
| return master->send_break(master, link); |
| |
| return 0; |
| } |
| |
| static int fsi_master_scan(struct fsi_master *master) |
| { |
| int link, rc; |
| |
| for (link = 0; link < master->n_links; link++) { |
| rc = fsi_master_link_enable(master, link); |
| if (rc) { |
| dev_dbg(&master->dev, |
| "enable link %d failed: %d\n", link, rc); |
| continue; |
| } |
| rc = fsi_master_break(master, link); |
| if (rc) { |
| dev_dbg(&master->dev, |
| "break to link %d failed: %d\n", link, rc); |
| continue; |
| } |
| |
| fsi_slave_init(master, link, 0); |
| } |
| |
| return 0; |
| } |
| |
| static int fsi_slave_remove_device(struct device *dev, void *arg) |
| { |
| device_unregister(dev); |
| return 0; |
| } |
| |
| static int fsi_master_remove_slave(struct device *dev, void *arg) |
| { |
| device_for_each_child(dev, NULL, fsi_slave_remove_device); |
| device_unregister(dev); |
| return 0; |
| } |
| |
| static void fsi_master_unscan(struct fsi_master *master) |
| { |
| device_for_each_child(&master->dev, NULL, fsi_master_remove_slave); |
| } |
| |
| static ssize_t master_rescan_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct fsi_master *master = to_fsi_master(dev); |
| int rc; |
| |
| fsi_master_unscan(master); |
| rc = fsi_master_scan(master); |
| if (rc < 0) |
| return rc; |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(rescan, 0200, NULL, master_rescan_store); |
| |
| static ssize_t master_break_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct fsi_master *master = to_fsi_master(dev); |
| |
| fsi_master_break(master, 0); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(break, 0200, NULL, master_break_store); |
| |
| int fsi_master_register(struct fsi_master *master) |
| { |
| int rc; |
| |
| if (!master) |
| return -EINVAL; |
| |
| master->idx = ida_simple_get(&master_ida, 0, INT_MAX, GFP_KERNEL); |
| dev_set_name(&master->dev, "fsi%d", master->idx); |
| |
| rc = device_register(&master->dev); |
| if (rc) { |
| ida_simple_remove(&master_ida, master->idx); |
| return rc; |
| } |
| |
| rc = device_create_file(&master->dev, &dev_attr_rescan); |
| if (rc) { |
| device_unregister(&master->dev); |
| ida_simple_remove(&master_ida, master->idx); |
| return rc; |
| } |
| |
| rc = device_create_file(&master->dev, &dev_attr_break); |
| if (rc) { |
| device_unregister(&master->dev); |
| ida_simple_remove(&master_ida, master->idx); |
| return rc; |
| } |
| |
| fsi_master_scan(master); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(fsi_master_register); |
| |
| void fsi_master_unregister(struct fsi_master *master) |
| { |
| if (master->idx >= 0) { |
| ida_simple_remove(&master_ida, master->idx); |
| master->idx = -1; |
| } |
| |
| fsi_master_unscan(master); |
| device_unregister(&master->dev); |
| } |
| EXPORT_SYMBOL_GPL(fsi_master_unregister); |
| |
| /* FSI core & Linux bus type definitions */ |
| |
| static int fsi_bus_match(struct device *dev, struct device_driver *drv) |
| { |
| struct fsi_device *fsi_dev = to_fsi_dev(dev); |
| struct fsi_driver *fsi_drv = to_fsi_drv(drv); |
| const struct fsi_device_id *id; |
| |
| if (!fsi_drv->id_table) |
| return 0; |
| |
| for (id = fsi_drv->id_table; id->engine_type; id++) { |
| if (id->engine_type != fsi_dev->engine_type) |
| continue; |
| if (id->version == FSI_VERSION_ANY || |
| id->version == fsi_dev->version) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| int fsi_driver_register(struct fsi_driver *fsi_drv) |
| { |
| if (!fsi_drv) |
| return -EINVAL; |
| if (!fsi_drv->id_table) |
| return -EINVAL; |
| |
| return driver_register(&fsi_drv->drv); |
| } |
| EXPORT_SYMBOL_GPL(fsi_driver_register); |
| |
| void fsi_driver_unregister(struct fsi_driver *fsi_drv) |
| { |
| driver_unregister(&fsi_drv->drv); |
| } |
| EXPORT_SYMBOL_GPL(fsi_driver_unregister); |
| |
| struct bus_type fsi_bus_type = { |
| .name = "fsi", |
| .match = fsi_bus_match, |
| }; |
| EXPORT_SYMBOL_GPL(fsi_bus_type); |
| |
| static int __init fsi_init(void) |
| { |
| return bus_register(&fsi_bus_type); |
| } |
| postcore_initcall(fsi_init); |
| |
| static void fsi_exit(void) |
| { |
| bus_unregister(&fsi_bus_type); |
| } |
| module_exit(fsi_exit); |
| module_param(discard_errors, int, 0664); |
| MODULE_LICENSE("GPL"); |
| MODULE_PARM_DESC(discard_errors, "Don't invoke error handling on bus accesses"); |