| /* MN10300 spinlock support |
| * |
| * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. |
| * Written by David Howells (dhowells@redhat.com) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public Licence |
| * as published by the Free Software Foundation; either version |
| * 2 of the Licence, or (at your option) any later version. |
| */ |
| #ifndef _ASM_SPINLOCK_H |
| #define _ASM_SPINLOCK_H |
| |
| #include <linux/atomic.h> |
| #include <asm/barrier.h> |
| #include <asm/processor.h> |
| #include <asm/rwlock.h> |
| #include <asm/page.h> |
| |
| /* |
| * Simple spin lock operations. There are two variants, one clears IRQ's |
| * on the local processor, one does not. |
| * |
| * We make no fairness assumptions. They have a cost. |
| */ |
| |
| #define arch_spin_is_locked(x) (*(volatile signed char *)(&(x)->slock) != 0) |
| |
| static inline void arch_spin_unlock(arch_spinlock_t *lock) |
| { |
| asm volatile( |
| " bclr 1,(0,%0) \n" |
| : |
| : "a"(&lock->slock) |
| : "memory", "cc"); |
| } |
| |
| static inline int arch_spin_trylock(arch_spinlock_t *lock) |
| { |
| int ret; |
| |
| asm volatile( |
| " mov 1,%0 \n" |
| " bset %0,(%1) \n" |
| " bne 1f \n" |
| " clr %0 \n" |
| "1: xor 1,%0 \n" |
| : "=d"(ret) |
| : "a"(&lock->slock) |
| : "memory", "cc"); |
| |
| return ret; |
| } |
| |
| static inline void arch_spin_lock(arch_spinlock_t *lock) |
| { |
| asm volatile( |
| "1: bset 1,(0,%0) \n" |
| " bne 1b \n" |
| : |
| : "a"(&lock->slock) |
| : "memory", "cc"); |
| } |
| |
| static inline void arch_spin_lock_flags(arch_spinlock_t *lock, |
| unsigned long flags) |
| { |
| int temp; |
| |
| asm volatile( |
| "1: bset 1,(0,%2) \n" |
| " beq 3f \n" |
| " mov %1,epsw \n" |
| "2: mov (0,%2),%0 \n" |
| " or %0,%0 \n" |
| " bne 2b \n" |
| " mov %3,%0 \n" |
| " mov %0,epsw \n" |
| " nop \n" |
| " nop \n" |
| " bra 1b\n" |
| "3: \n" |
| : "=&d" (temp) |
| : "d" (flags), "a"(&lock->slock), "i"(EPSW_IE | MN10300_CLI_LEVEL) |
| : "memory", "cc"); |
| } |
| |
| #ifdef __KERNEL__ |
| |
| /* |
| * Read-write spinlocks, allowing multiple readers |
| * but only one writer. |
| * |
| * NOTE! it is quite common to have readers in interrupts |
| * but no interrupt writers. For those circumstances we |
| * can "mix" irq-safe locks - any writer needs to get a |
| * irq-safe write-lock, but readers can get non-irqsafe |
| * read-locks. |
| */ |
| |
| /** |
| * read_can_lock - would read_trylock() succeed? |
| * @lock: the rwlock in question. |
| */ |
| #define arch_read_can_lock(x) ((int)(x)->lock > 0) |
| |
| /** |
| * write_can_lock - would write_trylock() succeed? |
| * @lock: the rwlock in question. |
| */ |
| #define arch_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS) |
| |
| /* |
| * On mn10300, we implement read-write locks as a 32-bit counter |
| * with the high bit (sign) being the "contended" bit. |
| */ |
| static inline void arch_read_lock(arch_rwlock_t *rw) |
| { |
| #if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT |
| __build_read_lock(rw, "__read_lock_failed"); |
| #else |
| { |
| atomic_t *count = (atomic_t *)rw; |
| while (atomic_dec_return(count) < 0) |
| atomic_inc(count); |
| } |
| #endif |
| } |
| |
| static inline void arch_write_lock(arch_rwlock_t *rw) |
| { |
| #if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT |
| __build_write_lock(rw, "__write_lock_failed"); |
| #else |
| { |
| atomic_t *count = (atomic_t *)rw; |
| while (!atomic_sub_and_test(RW_LOCK_BIAS, count)) |
| atomic_add(RW_LOCK_BIAS, count); |
| } |
| #endif |
| } |
| |
| static inline void arch_read_unlock(arch_rwlock_t *rw) |
| { |
| #if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT |
| __build_read_unlock(rw); |
| #else |
| { |
| atomic_t *count = (atomic_t *)rw; |
| atomic_inc(count); |
| } |
| #endif |
| } |
| |
| static inline void arch_write_unlock(arch_rwlock_t *rw) |
| { |
| #if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT |
| __build_write_unlock(rw); |
| #else |
| { |
| atomic_t *count = (atomic_t *)rw; |
| atomic_add(RW_LOCK_BIAS, count); |
| } |
| #endif |
| } |
| |
| static inline int arch_read_trylock(arch_rwlock_t *lock) |
| { |
| atomic_t *count = (atomic_t *)lock; |
| atomic_dec(count); |
| if (atomic_read(count) >= 0) |
| return 1; |
| atomic_inc(count); |
| return 0; |
| } |
| |
| static inline int arch_write_trylock(arch_rwlock_t *lock) |
| { |
| atomic_t *count = (atomic_t *)lock; |
| if (atomic_sub_and_test(RW_LOCK_BIAS, count)) |
| return 1; |
| atomic_add(RW_LOCK_BIAS, count); |
| return 0; |
| } |
| |
| #define arch_read_lock_flags(lock, flags) arch_read_lock(lock) |
| #define arch_write_lock_flags(lock, flags) arch_write_lock(lock) |
| |
| #define _raw_spin_relax(lock) cpu_relax() |
| #define _raw_read_relax(lock) cpu_relax() |
| #define _raw_write_relax(lock) cpu_relax() |
| |
| #endif /* __KERNEL__ */ |
| #endif /* _ASM_SPINLOCK_H */ |