| /* |
| * Copyright (C) 2014-2017 Linaro Ltd. <ard.biesheuvel@linaro.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/elf.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/sort.h> |
| |
| struct plt_entry { |
| /* |
| * A program that conforms to the AArch64 Procedure Call Standard |
| * (AAPCS64) must assume that a veneer that alters IP0 (x16) and/or |
| * IP1 (x17) may be inserted at any branch instruction that is |
| * exposed to a relocation that supports long branches. Since that |
| * is exactly what we are dealing with here, we are free to use x16 |
| * as a scratch register in the PLT veneers. |
| */ |
| __le32 mov0; /* movn x16, #0x.... */ |
| __le32 mov1; /* movk x16, #0x...., lsl #16 */ |
| __le32 mov2; /* movk x16, #0x...., lsl #32 */ |
| __le32 br; /* br x16 */ |
| }; |
| |
| static bool in_init(const struct module *mod, void *loc) |
| { |
| return (u64)loc - (u64)mod->init_layout.base < mod->init_layout.size; |
| } |
| |
| u64 module_emit_plt_entry(struct module *mod, void *loc, const Elf64_Rela *rela, |
| Elf64_Sym *sym) |
| { |
| struct mod_plt_sec *pltsec = !in_init(mod, loc) ? &mod->arch.core : |
| &mod->arch.init; |
| struct plt_entry *plt = (struct plt_entry *)pltsec->plt->sh_addr; |
| int i = pltsec->plt_num_entries; |
| u64 val = sym->st_value + rela->r_addend; |
| |
| /* |
| * MOVK/MOVN/MOVZ opcode: |
| * +--------+------------+--------+-----------+-------------+---------+ |
| * | sf[31] | opc[30:29] | 100101 | hw[22:21] | imm16[20:5] | Rd[4:0] | |
| * +--------+------------+--------+-----------+-------------+---------+ |
| * |
| * Rd := 0x10 (x16) |
| * hw := 0b00 (no shift), 0b01 (lsl #16), 0b10 (lsl #32) |
| * opc := 0b11 (MOVK), 0b00 (MOVN), 0b10 (MOVZ) |
| * sf := 1 (64-bit variant) |
| */ |
| plt[i] = (struct plt_entry){ |
| cpu_to_le32(0x92800010 | (((~val ) & 0xffff)) << 5), |
| cpu_to_le32(0xf2a00010 | ((( val >> 16) & 0xffff)) << 5), |
| cpu_to_le32(0xf2c00010 | ((( val >> 32) & 0xffff)) << 5), |
| cpu_to_le32(0xd61f0200) |
| }; |
| |
| /* |
| * Check if the entry we just created is a duplicate. Given that the |
| * relocations are sorted, this will be the last entry we allocated. |
| * (if one exists). |
| */ |
| if (i > 0 && |
| plt[i].mov0 == plt[i - 1].mov0 && |
| plt[i].mov1 == plt[i - 1].mov1 && |
| plt[i].mov2 == plt[i - 1].mov2) |
| return (u64)&plt[i - 1]; |
| |
| pltsec->plt_num_entries++; |
| BUG_ON(pltsec->plt_num_entries > pltsec->plt_max_entries); |
| |
| return (u64)&plt[i]; |
| } |
| |
| #define cmp_3way(a,b) ((a) < (b) ? -1 : (a) > (b)) |
| |
| static int cmp_rela(const void *a, const void *b) |
| { |
| const Elf64_Rela *x = a, *y = b; |
| int i; |
| |
| /* sort by type, symbol index and addend */ |
| i = cmp_3way(ELF64_R_TYPE(x->r_info), ELF64_R_TYPE(y->r_info)); |
| if (i == 0) |
| i = cmp_3way(ELF64_R_SYM(x->r_info), ELF64_R_SYM(y->r_info)); |
| if (i == 0) |
| i = cmp_3way(x->r_addend, y->r_addend); |
| return i; |
| } |
| |
| static bool duplicate_rel(const Elf64_Rela *rela, int num) |
| { |
| /* |
| * Entries are sorted by type, symbol index and addend. That means |
| * that, if a duplicate entry exists, it must be in the preceding |
| * slot. |
| */ |
| return num > 0 && cmp_rela(rela + num, rela + num - 1) == 0; |
| } |
| |
| static unsigned int count_plts(Elf64_Sym *syms, Elf64_Rela *rela, int num, |
| Elf64_Word dstidx) |
| { |
| unsigned int ret = 0; |
| Elf64_Sym *s; |
| int i; |
| |
| for (i = 0; i < num; i++) { |
| switch (ELF64_R_TYPE(rela[i].r_info)) { |
| case R_AARCH64_JUMP26: |
| case R_AARCH64_CALL26: |
| /* |
| * We only have to consider branch targets that resolve |
| * to symbols that are defined in a different section. |
| * This is not simply a heuristic, it is a fundamental |
| * limitation, since there is no guaranteed way to emit |
| * PLT entries sufficiently close to the branch if the |
| * section size exceeds the range of a branch |
| * instruction. So ignore relocations against defined |
| * symbols if they live in the same section as the |
| * relocation target. |
| */ |
| s = syms + ELF64_R_SYM(rela[i].r_info); |
| if (s->st_shndx == dstidx) |
| break; |
| |
| /* |
| * Jump relocations with non-zero addends against |
| * undefined symbols are supported by the ELF spec, but |
| * do not occur in practice (e.g., 'jump n bytes past |
| * the entry point of undefined function symbol f'). |
| * So we need to support them, but there is no need to |
| * take them into consideration when trying to optimize |
| * this code. So let's only check for duplicates when |
| * the addend is zero: this allows us to record the PLT |
| * entry address in the symbol table itself, rather than |
| * having to search the list for duplicates each time we |
| * emit one. |
| */ |
| if (rela[i].r_addend != 0 || !duplicate_rel(rela, i)) |
| ret++; |
| break; |
| } |
| } |
| return ret; |
| } |
| |
| int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs, |
| char *secstrings, struct module *mod) |
| { |
| unsigned long core_plts = 0; |
| unsigned long init_plts = 0; |
| Elf64_Sym *syms = NULL; |
| int i; |
| |
| /* |
| * Find the empty .plt section so we can expand it to store the PLT |
| * entries. Record the symtab address as well. |
| */ |
| for (i = 0; i < ehdr->e_shnum; i++) { |
| if (!strcmp(secstrings + sechdrs[i].sh_name, ".plt")) |
| mod->arch.core.plt = sechdrs + i; |
| else if (!strcmp(secstrings + sechdrs[i].sh_name, ".init.plt")) |
| mod->arch.init.plt = sechdrs + i; |
| else if (sechdrs[i].sh_type == SHT_SYMTAB) |
| syms = (Elf64_Sym *)sechdrs[i].sh_addr; |
| } |
| |
| if (!mod->arch.core.plt || !mod->arch.init.plt) { |
| pr_err("%s: module PLT section(s) missing\n", mod->name); |
| return -ENOEXEC; |
| } |
| if (!syms) { |
| pr_err("%s: module symtab section missing\n", mod->name); |
| return -ENOEXEC; |
| } |
| |
| for (i = 0; i < ehdr->e_shnum; i++) { |
| Elf64_Rela *rels = (void *)ehdr + sechdrs[i].sh_offset; |
| int numrels = sechdrs[i].sh_size / sizeof(Elf64_Rela); |
| Elf64_Shdr *dstsec = sechdrs + sechdrs[i].sh_info; |
| |
| if (sechdrs[i].sh_type != SHT_RELA) |
| continue; |
| |
| /* ignore relocations that operate on non-exec sections */ |
| if (!(dstsec->sh_flags & SHF_EXECINSTR)) |
| continue; |
| |
| /* sort by type, symbol index and addend */ |
| sort(rels, numrels, sizeof(Elf64_Rela), cmp_rela, NULL); |
| |
| if (strncmp(secstrings + dstsec->sh_name, ".init", 5) != 0) |
| core_plts += count_plts(syms, rels, numrels, |
| sechdrs[i].sh_info); |
| else |
| init_plts += count_plts(syms, rels, numrels, |
| sechdrs[i].sh_info); |
| } |
| |
| mod->arch.core.plt->sh_type = SHT_NOBITS; |
| mod->arch.core.plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC; |
| mod->arch.core.plt->sh_addralign = L1_CACHE_BYTES; |
| mod->arch.core.plt->sh_size = (core_plts + 1) * sizeof(struct plt_entry); |
| mod->arch.core.plt_num_entries = 0; |
| mod->arch.core.plt_max_entries = core_plts; |
| |
| mod->arch.init.plt->sh_type = SHT_NOBITS; |
| mod->arch.init.plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC; |
| mod->arch.init.plt->sh_addralign = L1_CACHE_BYTES; |
| mod->arch.init.plt->sh_size = (init_plts + 1) * sizeof(struct plt_entry); |
| mod->arch.init.plt_num_entries = 0; |
| mod->arch.init.plt_max_entries = init_plts; |
| |
| return 0; |
| } |