| /* |
| * Performance event support for the System z CPU-measurement Sampling Facility |
| * |
| * Copyright IBM Corp. 2013 |
| * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License (version 2 only) |
| * as published by the Free Software Foundation. |
| */ |
| #define KMSG_COMPONENT "cpum_sf" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/perf_event.h> |
| #include <linux/percpu.h> |
| #include <linux/notifier.h> |
| #include <linux/export.h> |
| #include <linux/slab.h> |
| #include <linux/mm.h> |
| #include <linux/moduleparam.h> |
| #include <asm/cpu_mf.h> |
| #include <asm/irq.h> |
| #include <asm/debug.h> |
| #include <asm/timex.h> |
| |
| /* Minimum number of sample-data-block-tables: |
| * At least one table is required for the sampling buffer structure. |
| * A single table contains up to 511 pointers to sample-data-blocks. |
| */ |
| #define CPUM_SF_MIN_SDBT 1 |
| |
| /* Number of sample-data-blocks per sample-data-block-table (SDBT): |
| * A table contains SDB pointers (8 bytes) and one table-link entry |
| * that points to the origin of the next SDBT. |
| */ |
| #define CPUM_SF_SDB_PER_TABLE ((PAGE_SIZE - 8) / 8) |
| |
| /* Maximum page offset for an SDBT table-link entry: |
| * If this page offset is reached, a table-link entry to the next SDBT |
| * must be added. |
| */ |
| #define CPUM_SF_SDBT_TL_OFFSET (CPUM_SF_SDB_PER_TABLE * 8) |
| static inline int require_table_link(const void *sdbt) |
| { |
| return ((unsigned long) sdbt & ~PAGE_MASK) == CPUM_SF_SDBT_TL_OFFSET; |
| } |
| |
| /* Minimum and maximum sampling buffer sizes: |
| * |
| * This number represents the maximum size of the sampling buffer taking |
| * the number of sample-data-block-tables into account. Note that these |
| * numbers apply to the basic-sampling function only. |
| * The maximum number of SDBs is increased by CPUM_SF_SDB_DIAG_FACTOR if |
| * the diagnostic-sampling function is active. |
| * |
| * Sampling buffer size Buffer characteristics |
| * --------------------------------------------------- |
| * 64KB == 16 pages (4KB per page) |
| * 1 page for SDB-tables |
| * 15 pages for SDBs |
| * |
| * 32MB == 8192 pages (4KB per page) |
| * 16 pages for SDB-tables |
| * 8176 pages for SDBs |
| */ |
| static unsigned long __read_mostly CPUM_SF_MIN_SDB = 15; |
| static unsigned long __read_mostly CPUM_SF_MAX_SDB = 8176; |
| static unsigned long __read_mostly CPUM_SF_SDB_DIAG_FACTOR = 1; |
| |
| struct sf_buffer { |
| unsigned long *sdbt; /* Sample-data-block-table origin */ |
| /* buffer characteristics (required for buffer increments) */ |
| unsigned long num_sdb; /* Number of sample-data-blocks */ |
| unsigned long num_sdbt; /* Number of sample-data-block-tables */ |
| unsigned long *tail; /* last sample-data-block-table */ |
| }; |
| |
| struct cpu_hw_sf { |
| /* CPU-measurement sampling information block */ |
| struct hws_qsi_info_block qsi; |
| /* CPU-measurement sampling control block */ |
| struct hws_lsctl_request_block lsctl; |
| struct sf_buffer sfb; /* Sampling buffer */ |
| unsigned int flags; /* Status flags */ |
| struct perf_event *event; /* Scheduled perf event */ |
| }; |
| static DEFINE_PER_CPU(struct cpu_hw_sf, cpu_hw_sf); |
| |
| /* Debug feature */ |
| static debug_info_t *sfdbg; |
| |
| /* |
| * sf_disable() - Switch off sampling facility |
| */ |
| static int sf_disable(void) |
| { |
| struct hws_lsctl_request_block sreq; |
| |
| memset(&sreq, 0, sizeof(sreq)); |
| return lsctl(&sreq); |
| } |
| |
| /* |
| * sf_buffer_available() - Check for an allocated sampling buffer |
| */ |
| static int sf_buffer_available(struct cpu_hw_sf *cpuhw) |
| { |
| return !!cpuhw->sfb.sdbt; |
| } |
| |
| /* |
| * deallocate sampling facility buffer |
| */ |
| static void free_sampling_buffer(struct sf_buffer *sfb) |
| { |
| unsigned long *sdbt, *curr; |
| |
| if (!sfb->sdbt) |
| return; |
| |
| sdbt = sfb->sdbt; |
| curr = sdbt; |
| |
| /* Free the SDBT after all SDBs are processed... */ |
| while (1) { |
| if (!*curr || !sdbt) |
| break; |
| |
| /* Process table-link entries */ |
| if (is_link_entry(curr)) { |
| curr = get_next_sdbt(curr); |
| if (sdbt) |
| free_page((unsigned long) sdbt); |
| |
| /* If the origin is reached, sampling buffer is freed */ |
| if (curr == sfb->sdbt) |
| break; |
| else |
| sdbt = curr; |
| } else { |
| /* Process SDB pointer */ |
| if (*curr) { |
| free_page(*curr); |
| curr++; |
| } |
| } |
| } |
| |
| debug_sprintf_event(sfdbg, 5, |
| "free_sampling_buffer: freed sdbt=%p\n", sfb->sdbt); |
| memset(sfb, 0, sizeof(*sfb)); |
| } |
| |
| static int alloc_sample_data_block(unsigned long *sdbt, gfp_t gfp_flags) |
| { |
| unsigned long sdb, *trailer; |
| |
| /* Allocate and initialize sample-data-block */ |
| sdb = get_zeroed_page(gfp_flags); |
| if (!sdb) |
| return -ENOMEM; |
| trailer = trailer_entry_ptr(sdb); |
| *trailer = SDB_TE_ALERT_REQ_MASK; |
| |
| /* Link SDB into the sample-data-block-table */ |
| *sdbt = sdb; |
| |
| return 0; |
| } |
| |
| /* |
| * realloc_sampling_buffer() - extend sampler memory |
| * |
| * Allocates new sample-data-blocks and adds them to the specified sampling |
| * buffer memory. |
| * |
| * Important: This modifies the sampling buffer and must be called when the |
| * sampling facility is disabled. |
| * |
| * Returns zero on success, non-zero otherwise. |
| */ |
| static int realloc_sampling_buffer(struct sf_buffer *sfb, |
| unsigned long num_sdb, gfp_t gfp_flags) |
| { |
| int i, rc; |
| unsigned long *new, *tail; |
| |
| if (!sfb->sdbt || !sfb->tail) |
| return -EINVAL; |
| |
| if (!is_link_entry(sfb->tail)) |
| return -EINVAL; |
| |
| /* Append to the existing sampling buffer, overwriting the table-link |
| * register. |
| * The tail variables always points to the "tail" (last and table-link) |
| * entry in an SDB-table. |
| */ |
| tail = sfb->tail; |
| |
| /* Do a sanity check whether the table-link entry points to |
| * the sampling buffer origin. |
| */ |
| if (sfb->sdbt != get_next_sdbt(tail)) { |
| debug_sprintf_event(sfdbg, 3, "realloc_sampling_buffer: " |
| "sampling buffer is not linked: origin=%p" |
| "tail=%p\n", |
| (void *) sfb->sdbt, (void *) tail); |
| return -EINVAL; |
| } |
| |
| /* Allocate remaining SDBs */ |
| rc = 0; |
| for (i = 0; i < num_sdb; i++) { |
| /* Allocate a new SDB-table if it is full. */ |
| if (require_table_link(tail)) { |
| new = (unsigned long *) get_zeroed_page(gfp_flags); |
| if (!new) { |
| rc = -ENOMEM; |
| break; |
| } |
| sfb->num_sdbt++; |
| /* Link current page to tail of chain */ |
| *tail = (unsigned long)(void *) new + 1; |
| tail = new; |
| } |
| |
| /* Allocate a new sample-data-block. |
| * If there is not enough memory, stop the realloc process |
| * and simply use what was allocated. If this is a temporary |
| * issue, a new realloc call (if required) might succeed. |
| */ |
| rc = alloc_sample_data_block(tail, gfp_flags); |
| if (rc) |
| break; |
| sfb->num_sdb++; |
| tail++; |
| } |
| |
| /* Link sampling buffer to its origin */ |
| *tail = (unsigned long) sfb->sdbt + 1; |
| sfb->tail = tail; |
| |
| debug_sprintf_event(sfdbg, 4, "realloc_sampling_buffer: new buffer" |
| " settings: sdbt=%lu sdb=%lu\n", |
| sfb->num_sdbt, sfb->num_sdb); |
| return rc; |
| } |
| |
| /* |
| * allocate_sampling_buffer() - allocate sampler memory |
| * |
| * Allocates and initializes a sampling buffer structure using the |
| * specified number of sample-data-blocks (SDB). For each allocation, |
| * a 4K page is used. The number of sample-data-block-tables (SDBT) |
| * are calculated from SDBs. |
| * Also set the ALERT_REQ mask in each SDBs trailer. |
| * |
| * Returns zero on success, non-zero otherwise. |
| */ |
| static int alloc_sampling_buffer(struct sf_buffer *sfb, unsigned long num_sdb) |
| { |
| int rc; |
| |
| if (sfb->sdbt) |
| return -EINVAL; |
| |
| /* Allocate the sample-data-block-table origin */ |
| sfb->sdbt = (unsigned long *) get_zeroed_page(GFP_KERNEL); |
| if (!sfb->sdbt) |
| return -ENOMEM; |
| sfb->num_sdb = 0; |
| sfb->num_sdbt = 1; |
| |
| /* Link the table origin to point to itself to prepare for |
| * realloc_sampling_buffer() invocation. |
| */ |
| sfb->tail = sfb->sdbt; |
| *sfb->tail = (unsigned long)(void *) sfb->sdbt + 1; |
| |
| /* Allocate requested number of sample-data-blocks */ |
| rc = realloc_sampling_buffer(sfb, num_sdb, GFP_KERNEL); |
| if (rc) { |
| free_sampling_buffer(sfb); |
| debug_sprintf_event(sfdbg, 4, "alloc_sampling_buffer: " |
| "realloc_sampling_buffer failed with rc=%i\n", rc); |
| } else |
| debug_sprintf_event(sfdbg, 4, |
| "alloc_sampling_buffer: tear=%p dear=%p\n", |
| sfb->sdbt, (void *) *sfb->sdbt); |
| return rc; |
| } |
| |
| static void sfb_set_limits(unsigned long min, unsigned long max) |
| { |
| struct hws_qsi_info_block si; |
| |
| CPUM_SF_MIN_SDB = min; |
| CPUM_SF_MAX_SDB = max; |
| |
| memset(&si, 0, sizeof(si)); |
| if (!qsi(&si)) |
| CPUM_SF_SDB_DIAG_FACTOR = DIV_ROUND_UP(si.dsdes, si.bsdes); |
| } |
| |
| static unsigned long sfb_max_limit(struct hw_perf_event *hwc) |
| { |
| return SAMPL_DIAG_MODE(hwc) ? CPUM_SF_MAX_SDB * CPUM_SF_SDB_DIAG_FACTOR |
| : CPUM_SF_MAX_SDB; |
| } |
| |
| static unsigned long sfb_pending_allocs(struct sf_buffer *sfb, |
| struct hw_perf_event *hwc) |
| { |
| if (!sfb->sdbt) |
| return SFB_ALLOC_REG(hwc); |
| if (SFB_ALLOC_REG(hwc) > sfb->num_sdb) |
| return SFB_ALLOC_REG(hwc) - sfb->num_sdb; |
| return 0; |
| } |
| |
| static int sfb_has_pending_allocs(struct sf_buffer *sfb, |
| struct hw_perf_event *hwc) |
| { |
| return sfb_pending_allocs(sfb, hwc) > 0; |
| } |
| |
| static void sfb_account_allocs(unsigned long num, struct hw_perf_event *hwc) |
| { |
| /* Limit the number of SDBs to not exceed the maximum */ |
| num = min_t(unsigned long, num, sfb_max_limit(hwc) - SFB_ALLOC_REG(hwc)); |
| if (num) |
| SFB_ALLOC_REG(hwc) += num; |
| } |
| |
| static void sfb_init_allocs(unsigned long num, struct hw_perf_event *hwc) |
| { |
| SFB_ALLOC_REG(hwc) = 0; |
| sfb_account_allocs(num, hwc); |
| } |
| |
| static size_t event_sample_size(struct hw_perf_event *hwc) |
| { |
| struct sf_raw_sample *sfr = (struct sf_raw_sample *) RAWSAMPLE_REG(hwc); |
| size_t sample_size; |
| |
| /* The sample size depends on the sampling function: The basic-sampling |
| * function must be always enabled, diagnostic-sampling function is |
| * optional. |
| */ |
| sample_size = sfr->bsdes; |
| if (SAMPL_DIAG_MODE(hwc)) |
| sample_size += sfr->dsdes; |
| |
| return sample_size; |
| } |
| |
| static void deallocate_buffers(struct cpu_hw_sf *cpuhw) |
| { |
| if (cpuhw->sfb.sdbt) |
| free_sampling_buffer(&cpuhw->sfb); |
| } |
| |
| static int allocate_buffers(struct cpu_hw_sf *cpuhw, struct hw_perf_event *hwc) |
| { |
| unsigned long n_sdb, freq, factor; |
| size_t sfr_size, sample_size; |
| struct sf_raw_sample *sfr; |
| |
| /* Allocate raw sample buffer |
| * |
| * The raw sample buffer is used to temporarily store sampling data |
| * entries for perf raw sample processing. The buffer size mainly |
| * depends on the size of diagnostic-sampling data entries which is |
| * machine-specific. The exact size calculation includes: |
| * 1. The first 4 bytes of diagnostic-sampling data entries are |
| * already reflected in the sf_raw_sample structure. Subtract |
| * these bytes. |
| * 2. The perf raw sample data must be 8-byte aligned (u64) and |
| * perf's internal data size must be considered too. So add |
| * an additional u32 for correct alignment and subtract before |
| * allocating the buffer. |
| * 3. Store the raw sample buffer pointer in the perf event |
| * hardware structure. |
| */ |
| sfr_size = ALIGN((sizeof(*sfr) - sizeof(sfr->diag) + cpuhw->qsi.dsdes) + |
| sizeof(u32), sizeof(u64)); |
| sfr_size -= sizeof(u32); |
| sfr = kzalloc(sfr_size, GFP_KERNEL); |
| if (!sfr) |
| return -ENOMEM; |
| sfr->size = sfr_size; |
| sfr->bsdes = cpuhw->qsi.bsdes; |
| sfr->dsdes = cpuhw->qsi.dsdes; |
| RAWSAMPLE_REG(hwc) = (unsigned long) sfr; |
| |
| /* Calculate sampling buffers using 4K pages |
| * |
| * 1. Determine the sample data size which depends on the used |
| * sampling functions, for example, basic-sampling or |
| * basic-sampling with diagnostic-sampling. |
| * |
| * 2. Use the sampling frequency as input. The sampling buffer is |
| * designed for almost one second. This can be adjusted through |
| * the "factor" variable. |
| * In any case, alloc_sampling_buffer() sets the Alert Request |
| * Control indicator to trigger a measurement-alert to harvest |
| * sample-data-blocks (sdb). |
| * |
| * 3. Compute the number of sample-data-blocks and ensure a minimum |
| * of CPUM_SF_MIN_SDB. Also ensure the upper limit does not |
| * exceed a "calculated" maximum. The symbolic maximum is |
| * designed for basic-sampling only and needs to be increased if |
| * diagnostic-sampling is active. |
| * See also the remarks for these symbolic constants. |
| * |
| * 4. Compute the number of sample-data-block-tables (SDBT) and |
| * ensure a minimum of CPUM_SF_MIN_SDBT (one table can manage up |
| * to 511 SDBs). |
| */ |
| sample_size = event_sample_size(hwc); |
| freq = sample_rate_to_freq(&cpuhw->qsi, SAMPL_RATE(hwc)); |
| factor = 1; |
| n_sdb = DIV_ROUND_UP(freq, factor * ((PAGE_SIZE-64) / sample_size)); |
| if (n_sdb < CPUM_SF_MIN_SDB) |
| n_sdb = CPUM_SF_MIN_SDB; |
| |
| /* If there is already a sampling buffer allocated, it is very likely |
| * that the sampling facility is enabled too. If the event to be |
| * initialized requires a greater sampling buffer, the allocation must |
| * be postponed. Changing the sampling buffer requires the sampling |
| * facility to be in the disabled state. So, account the number of |
| * required SDBs and let cpumsf_pmu_enable() resize the buffer just |
| * before the event is started. |
| */ |
| sfb_init_allocs(n_sdb, hwc); |
| if (sf_buffer_available(cpuhw)) |
| return 0; |
| |
| debug_sprintf_event(sfdbg, 3, |
| "allocate_buffers: rate=%lu f=%lu sdb=%lu/%lu" |
| " sample_size=%lu cpuhw=%p\n", |
| SAMPL_RATE(hwc), freq, n_sdb, sfb_max_limit(hwc), |
| sample_size, cpuhw); |
| |
| return alloc_sampling_buffer(&cpuhw->sfb, |
| sfb_pending_allocs(&cpuhw->sfb, hwc)); |
| } |
| |
| static unsigned long min_percent(unsigned int percent, unsigned long base, |
| unsigned long min) |
| { |
| return min_t(unsigned long, min, DIV_ROUND_UP(percent * base, 100)); |
| } |
| |
| static unsigned long compute_sfb_extent(unsigned long ratio, unsigned long base) |
| { |
| /* Use a percentage-based approach to extend the sampling facility |
| * buffer. Accept up to 5% sample data loss. |
| * Vary the extents between 1% to 5% of the current number of |
| * sample-data-blocks. |
| */ |
| if (ratio <= 5) |
| return 0; |
| if (ratio <= 25) |
| return min_percent(1, base, 1); |
| if (ratio <= 50) |
| return min_percent(1, base, 1); |
| if (ratio <= 75) |
| return min_percent(2, base, 2); |
| if (ratio <= 100) |
| return min_percent(3, base, 3); |
| if (ratio <= 250) |
| return min_percent(4, base, 4); |
| |
| return min_percent(5, base, 8); |
| } |
| |
| static void sfb_account_overflows(struct cpu_hw_sf *cpuhw, |
| struct hw_perf_event *hwc) |
| { |
| unsigned long ratio, num; |
| |
| if (!OVERFLOW_REG(hwc)) |
| return; |
| |
| /* The sample_overflow contains the average number of sample data |
| * that has been lost because sample-data-blocks were full. |
| * |
| * Calculate the total number of sample data entries that has been |
| * discarded. Then calculate the ratio of lost samples to total samples |
| * per second in percent. |
| */ |
| ratio = DIV_ROUND_UP(100 * OVERFLOW_REG(hwc) * cpuhw->sfb.num_sdb, |
| sample_rate_to_freq(&cpuhw->qsi, SAMPL_RATE(hwc))); |
| |
| /* Compute number of sample-data-blocks */ |
| num = compute_sfb_extent(ratio, cpuhw->sfb.num_sdb); |
| if (num) |
| sfb_account_allocs(num, hwc); |
| |
| debug_sprintf_event(sfdbg, 5, "sfb: overflow: overflow=%llu ratio=%lu" |
| " num=%lu\n", OVERFLOW_REG(hwc), ratio, num); |
| OVERFLOW_REG(hwc) = 0; |
| } |
| |
| /* extend_sampling_buffer() - Extend sampling buffer |
| * @sfb: Sampling buffer structure (for local CPU) |
| * @hwc: Perf event hardware structure |
| * |
| * Use this function to extend the sampling buffer based on the overflow counter |
| * and postponed allocation extents stored in the specified Perf event hardware. |
| * |
| * Important: This function disables the sampling facility in order to safely |
| * change the sampling buffer structure. Do not call this function |
| * when the PMU is active. |
| */ |
| static void extend_sampling_buffer(struct sf_buffer *sfb, |
| struct hw_perf_event *hwc) |
| { |
| unsigned long num, num_old; |
| int rc; |
| |
| num = sfb_pending_allocs(sfb, hwc); |
| if (!num) |
| return; |
| num_old = sfb->num_sdb; |
| |
| /* Disable the sampling facility to reset any states and also |
| * clear pending measurement alerts. |
| */ |
| sf_disable(); |
| |
| /* Extend the sampling buffer. |
| * This memory allocation typically happens in an atomic context when |
| * called by perf. Because this is a reallocation, it is fine if the |
| * new SDB-request cannot be satisfied immediately. |
| */ |
| rc = realloc_sampling_buffer(sfb, num, GFP_ATOMIC); |
| if (rc) |
| debug_sprintf_event(sfdbg, 5, "sfb: extend: realloc " |
| "failed with rc=%i\n", rc); |
| |
| if (sfb_has_pending_allocs(sfb, hwc)) |
| debug_sprintf_event(sfdbg, 5, "sfb: extend: " |
| "req=%lu alloc=%lu remaining=%lu\n", |
| num, sfb->num_sdb - num_old, |
| sfb_pending_allocs(sfb, hwc)); |
| } |
| |
| |
| /* Number of perf events counting hardware events */ |
| static atomic_t num_events; |
| /* Used to avoid races in calling reserve/release_cpumf_hardware */ |
| static DEFINE_MUTEX(pmc_reserve_mutex); |
| |
| #define PMC_INIT 0 |
| #define PMC_RELEASE 1 |
| #define PMC_FAILURE 2 |
| static void setup_pmc_cpu(void *flags) |
| { |
| int err; |
| struct cpu_hw_sf *cpusf = this_cpu_ptr(&cpu_hw_sf); |
| |
| err = 0; |
| switch (*((int *) flags)) { |
| case PMC_INIT: |
| memset(cpusf, 0, sizeof(*cpusf)); |
| err = qsi(&cpusf->qsi); |
| if (err) |
| break; |
| cpusf->flags |= PMU_F_RESERVED; |
| err = sf_disable(); |
| if (err) |
| pr_err("Switching off the sampling facility failed " |
| "with rc=%i\n", err); |
| debug_sprintf_event(sfdbg, 5, |
| "setup_pmc_cpu: initialized: cpuhw=%p\n", cpusf); |
| break; |
| case PMC_RELEASE: |
| cpusf->flags &= ~PMU_F_RESERVED; |
| err = sf_disable(); |
| if (err) { |
| pr_err("Switching off the sampling facility failed " |
| "with rc=%i\n", err); |
| } else |
| deallocate_buffers(cpusf); |
| debug_sprintf_event(sfdbg, 5, |
| "setup_pmc_cpu: released: cpuhw=%p\n", cpusf); |
| break; |
| } |
| if (err) |
| *((int *) flags) |= PMC_FAILURE; |
| } |
| |
| static void release_pmc_hardware(void) |
| { |
| int flags = PMC_RELEASE; |
| |
| irq_subclass_unregister(IRQ_SUBCLASS_MEASUREMENT_ALERT); |
| on_each_cpu(setup_pmc_cpu, &flags, 1); |
| } |
| |
| static int reserve_pmc_hardware(void) |
| { |
| int flags = PMC_INIT; |
| |
| on_each_cpu(setup_pmc_cpu, &flags, 1); |
| if (flags & PMC_FAILURE) { |
| release_pmc_hardware(); |
| return -ENODEV; |
| } |
| irq_subclass_register(IRQ_SUBCLASS_MEASUREMENT_ALERT); |
| |
| return 0; |
| } |
| |
| static void hw_perf_event_destroy(struct perf_event *event) |
| { |
| /* Free raw sample buffer */ |
| if (RAWSAMPLE_REG(&event->hw)) |
| kfree((void *) RAWSAMPLE_REG(&event->hw)); |
| |
| /* Release PMC if this is the last perf event */ |
| if (!atomic_add_unless(&num_events, -1, 1)) { |
| mutex_lock(&pmc_reserve_mutex); |
| if (atomic_dec_return(&num_events) == 0) |
| release_pmc_hardware(); |
| mutex_unlock(&pmc_reserve_mutex); |
| } |
| } |
| |
| static void hw_init_period(struct hw_perf_event *hwc, u64 period) |
| { |
| hwc->sample_period = period; |
| hwc->last_period = hwc->sample_period; |
| local64_set(&hwc->period_left, hwc->sample_period); |
| } |
| |
| static void hw_reset_registers(struct hw_perf_event *hwc, |
| unsigned long *sdbt_origin) |
| { |
| struct sf_raw_sample *sfr; |
| |
| /* (Re)set to first sample-data-block-table */ |
| TEAR_REG(hwc) = (unsigned long) sdbt_origin; |
| |
| /* (Re)set raw sampling buffer register */ |
| sfr = (struct sf_raw_sample *) RAWSAMPLE_REG(hwc); |
| memset(&sfr->basic, 0, sizeof(sfr->basic)); |
| memset(&sfr->diag, 0, sfr->dsdes); |
| } |
| |
| static unsigned long hw_limit_rate(const struct hws_qsi_info_block *si, |
| unsigned long rate) |
| { |
| return clamp_t(unsigned long, rate, |
| si->min_sampl_rate, si->max_sampl_rate); |
| } |
| |
| static int __hw_perf_event_init(struct perf_event *event) |
| { |
| struct cpu_hw_sf *cpuhw; |
| struct hws_qsi_info_block si; |
| struct perf_event_attr *attr = &event->attr; |
| struct hw_perf_event *hwc = &event->hw; |
| unsigned long rate; |
| int cpu, err; |
| |
| /* Reserve CPU-measurement sampling facility */ |
| err = 0; |
| if (!atomic_inc_not_zero(&num_events)) { |
| mutex_lock(&pmc_reserve_mutex); |
| if (atomic_read(&num_events) == 0 && reserve_pmc_hardware()) |
| err = -EBUSY; |
| else |
| atomic_inc(&num_events); |
| mutex_unlock(&pmc_reserve_mutex); |
| } |
| event->destroy = hw_perf_event_destroy; |
| |
| if (err) |
| goto out; |
| |
| /* Access per-CPU sampling information (query sampling info) */ |
| /* |
| * The event->cpu value can be -1 to count on every CPU, for example, |
| * when attaching to a task. If this is specified, use the query |
| * sampling info from the current CPU, otherwise use event->cpu to |
| * retrieve the per-CPU information. |
| * Later, cpuhw indicates whether to allocate sampling buffers for a |
| * particular CPU (cpuhw!=NULL) or each online CPU (cpuw==NULL). |
| */ |
| memset(&si, 0, sizeof(si)); |
| cpuhw = NULL; |
| if (event->cpu == -1) |
| qsi(&si); |
| else { |
| /* Event is pinned to a particular CPU, retrieve the per-CPU |
| * sampling structure for accessing the CPU-specific QSI. |
| */ |
| cpuhw = &per_cpu(cpu_hw_sf, event->cpu); |
| si = cpuhw->qsi; |
| } |
| |
| /* Check sampling facility authorization and, if not authorized, |
| * fall back to other PMUs. It is safe to check any CPU because |
| * the authorization is identical for all configured CPUs. |
| */ |
| if (!si.as) { |
| err = -ENOENT; |
| goto out; |
| } |
| |
| /* Always enable basic sampling */ |
| SAMPL_FLAGS(hwc) = PERF_CPUM_SF_BASIC_MODE; |
| |
| /* Check if diagnostic sampling is requested. Deny if the required |
| * sampling authorization is missing. |
| */ |
| if (attr->config == PERF_EVENT_CPUM_SF_DIAG) { |
| if (!si.ad) { |
| err = -EPERM; |
| goto out; |
| } |
| SAMPL_FLAGS(hwc) |= PERF_CPUM_SF_DIAG_MODE; |
| } |
| |
| /* Check and set other sampling flags */ |
| if (attr->config1 & PERF_CPUM_SF_FULL_BLOCKS) |
| SAMPL_FLAGS(hwc) |= PERF_CPUM_SF_FULL_BLOCKS; |
| |
| /* The sampling information (si) contains information about the |
| * min/max sampling intervals and the CPU speed. So calculate the |
| * correct sampling interval and avoid the whole period adjust |
| * feedback loop. |
| */ |
| rate = 0; |
| if (attr->freq) { |
| rate = freq_to_sample_rate(&si, attr->sample_freq); |
| rate = hw_limit_rate(&si, rate); |
| attr->freq = 0; |
| attr->sample_period = rate; |
| } else { |
| /* The min/max sampling rates specifies the valid range |
| * of sample periods. If the specified sample period is |
| * out of range, limit the period to the range boundary. |
| */ |
| rate = hw_limit_rate(&si, hwc->sample_period); |
| |
| /* The perf core maintains a maximum sample rate that is |
| * configurable through the sysctl interface. Ensure the |
| * sampling rate does not exceed this value. This also helps |
| * to avoid throttling when pushing samples with |
| * perf_event_overflow(). |
| */ |
| if (sample_rate_to_freq(&si, rate) > |
| sysctl_perf_event_sample_rate) { |
| err = -EINVAL; |
| debug_sprintf_event(sfdbg, 1, "Sampling rate exceeds maximum perf sample rate\n"); |
| goto out; |
| } |
| } |
| SAMPL_RATE(hwc) = rate; |
| hw_init_period(hwc, SAMPL_RATE(hwc)); |
| |
| /* Initialize sample data overflow accounting */ |
| hwc->extra_reg.reg = REG_OVERFLOW; |
| OVERFLOW_REG(hwc) = 0; |
| |
| /* Allocate the per-CPU sampling buffer using the CPU information |
| * from the event. If the event is not pinned to a particular |
| * CPU (event->cpu == -1; or cpuhw == NULL), allocate sampling |
| * buffers for each online CPU. |
| */ |
| if (cpuhw) |
| /* Event is pinned to a particular CPU */ |
| err = allocate_buffers(cpuhw, hwc); |
| else { |
| /* Event is not pinned, allocate sampling buffer on |
| * each online CPU |
| */ |
| for_each_online_cpu(cpu) { |
| cpuhw = &per_cpu(cpu_hw_sf, cpu); |
| err = allocate_buffers(cpuhw, hwc); |
| if (err) |
| break; |
| } |
| } |
| out: |
| return err; |
| } |
| |
| static int cpumsf_pmu_event_init(struct perf_event *event) |
| { |
| int err; |
| |
| /* No support for taken branch sampling */ |
| if (has_branch_stack(event)) |
| return -EOPNOTSUPP; |
| |
| switch (event->attr.type) { |
| case PERF_TYPE_RAW: |
| if ((event->attr.config != PERF_EVENT_CPUM_SF) && |
| (event->attr.config != PERF_EVENT_CPUM_SF_DIAG)) |
| return -ENOENT; |
| break; |
| case PERF_TYPE_HARDWARE: |
| /* Support sampling of CPU cycles in addition to the |
| * counter facility. However, the counter facility |
| * is more precise and, hence, restrict this PMU to |
| * sampling events only. |
| */ |
| if (event->attr.config != PERF_COUNT_HW_CPU_CYCLES) |
| return -ENOENT; |
| if (!is_sampling_event(event)) |
| return -ENOENT; |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| /* Check online status of the CPU to which the event is pinned */ |
| if (event->cpu >= 0) { |
| if ((unsigned int)event->cpu >= nr_cpumask_bits) |
| return -ENODEV; |
| if (!cpu_online(event->cpu)) |
| return -ENODEV; |
| } |
| |
| /* Force reset of idle/hv excludes regardless of what the |
| * user requested. |
| */ |
| if (event->attr.exclude_hv) |
| event->attr.exclude_hv = 0; |
| if (event->attr.exclude_idle) |
| event->attr.exclude_idle = 0; |
| |
| err = __hw_perf_event_init(event); |
| if (unlikely(err)) |
| if (event->destroy) |
| event->destroy(event); |
| return err; |
| } |
| |
| static void cpumsf_pmu_enable(struct pmu *pmu) |
| { |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); |
| struct hw_perf_event *hwc; |
| int err; |
| |
| if (cpuhw->flags & PMU_F_ENABLED) |
| return; |
| |
| if (cpuhw->flags & PMU_F_ERR_MASK) |
| return; |
| |
| /* Check whether to extent the sampling buffer. |
| * |
| * Two conditions trigger an increase of the sampling buffer for a |
| * perf event: |
| * 1. Postponed buffer allocations from the event initialization. |
| * 2. Sampling overflows that contribute to pending allocations. |
| * |
| * Note that the extend_sampling_buffer() function disables the sampling |
| * facility, but it can be fully re-enabled using sampling controls that |
| * have been saved in cpumsf_pmu_disable(). |
| */ |
| if (cpuhw->event) { |
| hwc = &cpuhw->event->hw; |
| /* Account number of overflow-designated buffer extents */ |
| sfb_account_overflows(cpuhw, hwc); |
| if (sfb_has_pending_allocs(&cpuhw->sfb, hwc)) |
| extend_sampling_buffer(&cpuhw->sfb, hwc); |
| } |
| |
| /* (Re)enable the PMU and sampling facility */ |
| cpuhw->flags |= PMU_F_ENABLED; |
| barrier(); |
| |
| err = lsctl(&cpuhw->lsctl); |
| if (err) { |
| cpuhw->flags &= ~PMU_F_ENABLED; |
| pr_err("Loading sampling controls failed: op=%i err=%i\n", |
| 1, err); |
| return; |
| } |
| |
| debug_sprintf_event(sfdbg, 6, "pmu_enable: es=%i cs=%i ed=%i cd=%i " |
| "tear=%p dear=%p\n", cpuhw->lsctl.es, cpuhw->lsctl.cs, |
| cpuhw->lsctl.ed, cpuhw->lsctl.cd, |
| (void *) cpuhw->lsctl.tear, (void *) cpuhw->lsctl.dear); |
| } |
| |
| static void cpumsf_pmu_disable(struct pmu *pmu) |
| { |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); |
| struct hws_lsctl_request_block inactive; |
| struct hws_qsi_info_block si; |
| int err; |
| |
| if (!(cpuhw->flags & PMU_F_ENABLED)) |
| return; |
| |
| if (cpuhw->flags & PMU_F_ERR_MASK) |
| return; |
| |
| /* Switch off sampling activation control */ |
| inactive = cpuhw->lsctl; |
| inactive.cs = 0; |
| inactive.cd = 0; |
| |
| err = lsctl(&inactive); |
| if (err) { |
| pr_err("Loading sampling controls failed: op=%i err=%i\n", |
| 2, err); |
| return; |
| } |
| |
| /* Save state of TEAR and DEAR register contents */ |
| if (!qsi(&si)) { |
| /* TEAR/DEAR values are valid only if the sampling facility is |
| * enabled. Note that cpumsf_pmu_disable() might be called even |
| * for a disabled sampling facility because cpumsf_pmu_enable() |
| * controls the enable/disable state. |
| */ |
| if (si.es) { |
| cpuhw->lsctl.tear = si.tear; |
| cpuhw->lsctl.dear = si.dear; |
| } |
| } else |
| debug_sprintf_event(sfdbg, 3, "cpumsf_pmu_disable: " |
| "qsi() failed with err=%i\n", err); |
| |
| cpuhw->flags &= ~PMU_F_ENABLED; |
| } |
| |
| /* perf_exclude_event() - Filter event |
| * @event: The perf event |
| * @regs: pt_regs structure |
| * @sde_regs: Sample-data-entry (sde) regs structure |
| * |
| * Filter perf events according to their exclude specification. |
| * |
| * Return non-zero if the event shall be excluded. |
| */ |
| static int perf_exclude_event(struct perf_event *event, struct pt_regs *regs, |
| struct perf_sf_sde_regs *sde_regs) |
| { |
| if (event->attr.exclude_user && user_mode(regs)) |
| return 1; |
| if (event->attr.exclude_kernel && !user_mode(regs)) |
| return 1; |
| if (event->attr.exclude_guest && sde_regs->in_guest) |
| return 1; |
| if (event->attr.exclude_host && !sde_regs->in_guest) |
| return 1; |
| return 0; |
| } |
| |
| /* perf_push_sample() - Push samples to perf |
| * @event: The perf event |
| * @sample: Hardware sample data |
| * |
| * Use the hardware sample data to create perf event sample. The sample |
| * is the pushed to the event subsystem and the function checks for |
| * possible event overflows. If an event overflow occurs, the PMU is |
| * stopped. |
| * |
| * Return non-zero if an event overflow occurred. |
| */ |
| static int perf_push_sample(struct perf_event *event, struct sf_raw_sample *sfr) |
| { |
| int overflow; |
| struct pt_regs regs; |
| struct perf_sf_sde_regs *sde_regs; |
| struct perf_sample_data data; |
| struct perf_raw_record raw = { |
| .frag = { |
| .size = sfr->size, |
| .data = sfr, |
| }, |
| }; |
| |
| /* Setup perf sample */ |
| perf_sample_data_init(&data, 0, event->hw.last_period); |
| data.raw = &raw; |
| |
| /* Setup pt_regs to look like an CPU-measurement external interrupt |
| * using the Program Request Alert code. The regs.int_parm_long |
| * field which is unused contains additional sample-data-entry related |
| * indicators. |
| */ |
| memset(®s, 0, sizeof(regs)); |
| regs.int_code = 0x1407; |
| regs.int_parm = CPU_MF_INT_SF_PRA; |
| sde_regs = (struct perf_sf_sde_regs *) ®s.int_parm_long; |
| |
| psw_bits(regs.psw).ia = sfr->basic.ia; |
| psw_bits(regs.psw).dat = sfr->basic.T; |
| psw_bits(regs.psw).wait = sfr->basic.W; |
| psw_bits(regs.psw).pstate = sfr->basic.P; |
| psw_bits(regs.psw).as = sfr->basic.AS; |
| |
| /* |
| * Use the hardware provided configuration level to decide if the |
| * sample belongs to a guest or host. If that is not available, |
| * fall back to the following heuristics: |
| * A non-zero guest program parameter always indicates a guest |
| * sample. Some early samples or samples from guests without |
| * lpp usage would be misaccounted to the host. We use the asn |
| * value as an addon heuristic to detect most of these guest samples. |
| * If the value differs from 0xffff (the host value), we assume to |
| * be a KVM guest. |
| */ |
| switch (sfr->basic.CL) { |
| case 1: /* logical partition */ |
| sde_regs->in_guest = 0; |
| break; |
| case 2: /* virtual machine */ |
| sde_regs->in_guest = 1; |
| break; |
| default: /* old machine, use heuristics */ |
| if (sfr->basic.gpp || sfr->basic.prim_asn != 0xffff) |
| sde_regs->in_guest = 1; |
| break; |
| } |
| |
| overflow = 0; |
| if (perf_exclude_event(event, ®s, sde_regs)) |
| goto out; |
| if (perf_event_overflow(event, &data, ®s)) { |
| overflow = 1; |
| event->pmu->stop(event, 0); |
| } |
| perf_event_update_userpage(event); |
| out: |
| return overflow; |
| } |
| |
| static void perf_event_count_update(struct perf_event *event, u64 count) |
| { |
| local64_add(count, &event->count); |
| } |
| |
| static int sample_format_is_valid(struct hws_combined_entry *sample, |
| unsigned int flags) |
| { |
| if (likely(flags & PERF_CPUM_SF_BASIC_MODE)) |
| /* Only basic-sampling data entries with data-entry-format |
| * version of 0x0001 can be processed. |
| */ |
| if (sample->basic.def != 0x0001) |
| return 0; |
| if (flags & PERF_CPUM_SF_DIAG_MODE) |
| /* The data-entry-format number of diagnostic-sampling data |
| * entries can vary. Because diagnostic data is just passed |
| * through, do only a sanity check on the DEF. |
| */ |
| if (sample->diag.def < 0x8001) |
| return 0; |
| return 1; |
| } |
| |
| static int sample_is_consistent(struct hws_combined_entry *sample, |
| unsigned long flags) |
| { |
| /* This check applies only to basic-sampling data entries of potentially |
| * combined-sampling data entries. Invalid entries cannot be processed |
| * by the PMU and, thus, do not deliver an associated |
| * diagnostic-sampling data entry. |
| */ |
| if (unlikely(!(flags & PERF_CPUM_SF_BASIC_MODE))) |
| return 0; |
| /* |
| * Samples are skipped, if they are invalid or for which the |
| * instruction address is not predictable, i.e., the wait-state bit is |
| * set. |
| */ |
| if (sample->basic.I || sample->basic.W) |
| return 0; |
| return 1; |
| } |
| |
| static void reset_sample_slot(struct hws_combined_entry *sample, |
| unsigned long flags) |
| { |
| if (likely(flags & PERF_CPUM_SF_BASIC_MODE)) |
| sample->basic.def = 0; |
| if (flags & PERF_CPUM_SF_DIAG_MODE) |
| sample->diag.def = 0; |
| } |
| |
| static void sfr_store_sample(struct sf_raw_sample *sfr, |
| struct hws_combined_entry *sample) |
| { |
| if (likely(sfr->format & PERF_CPUM_SF_BASIC_MODE)) |
| sfr->basic = sample->basic; |
| if (sfr->format & PERF_CPUM_SF_DIAG_MODE) |
| memcpy(&sfr->diag, &sample->diag, sfr->dsdes); |
| } |
| |
| static void debug_sample_entry(struct hws_combined_entry *sample, |
| struct hws_trailer_entry *te, |
| unsigned long flags) |
| { |
| debug_sprintf_event(sfdbg, 4, "hw_collect_samples: Found unknown " |
| "sampling data entry: te->f=%i basic.def=%04x (%p)" |
| " diag.def=%04x (%p)\n", te->f, |
| sample->basic.def, &sample->basic, |
| (flags & PERF_CPUM_SF_DIAG_MODE) |
| ? sample->diag.def : 0xFFFF, |
| (flags & PERF_CPUM_SF_DIAG_MODE) |
| ? &sample->diag : NULL); |
| } |
| |
| /* hw_collect_samples() - Walk through a sample-data-block and collect samples |
| * @event: The perf event |
| * @sdbt: Sample-data-block table |
| * @overflow: Event overflow counter |
| * |
| * Walks through a sample-data-block and collects sampling data entries that are |
| * then pushed to the perf event subsystem. Depending on the sampling function, |
| * there can be either basic-sampling or combined-sampling data entries. A |
| * combined-sampling data entry consists of a basic- and a diagnostic-sampling |
| * data entry. The sampling function is determined by the flags in the perf |
| * event hardware structure. The function always works with a combined-sampling |
| * data entry but ignores the the diagnostic portion if it is not available. |
| * |
| * Note that the implementation focuses on basic-sampling data entries and, if |
| * such an entry is not valid, the entire combined-sampling data entry is |
| * ignored. |
| * |
| * The overflow variables counts the number of samples that has been discarded |
| * due to a perf event overflow. |
| */ |
| static void hw_collect_samples(struct perf_event *event, unsigned long *sdbt, |
| unsigned long long *overflow) |
| { |
| unsigned long flags = SAMPL_FLAGS(&event->hw); |
| struct hws_combined_entry *sample; |
| struct hws_trailer_entry *te; |
| struct sf_raw_sample *sfr; |
| size_t sample_size; |
| |
| /* Prepare and initialize raw sample data */ |
| sfr = (struct sf_raw_sample *) RAWSAMPLE_REG(&event->hw); |
| sfr->format = flags & PERF_CPUM_SF_MODE_MASK; |
| |
| sample_size = event_sample_size(&event->hw); |
| te = (struct hws_trailer_entry *) trailer_entry_ptr(*sdbt); |
| sample = (struct hws_combined_entry *) *sdbt; |
| while ((unsigned long *) sample < (unsigned long *) te) { |
| /* Check for an empty sample */ |
| if (!sample->basic.def) |
| break; |
| |
| /* Update perf event period */ |
| perf_event_count_update(event, SAMPL_RATE(&event->hw)); |
| |
| /* Check sampling data entry */ |
| if (sample_format_is_valid(sample, flags)) { |
| /* If an event overflow occurred, the PMU is stopped to |
| * throttle event delivery. Remaining sample data is |
| * discarded. |
| */ |
| if (!*overflow) { |
| if (sample_is_consistent(sample, flags)) { |
| /* Deliver sample data to perf */ |
| sfr_store_sample(sfr, sample); |
| *overflow = perf_push_sample(event, sfr); |
| } |
| } else |
| /* Count discarded samples */ |
| *overflow += 1; |
| } else { |
| debug_sample_entry(sample, te, flags); |
| /* Sample slot is not yet written or other record. |
| * |
| * This condition can occur if the buffer was reused |
| * from a combined basic- and diagnostic-sampling. |
| * If only basic-sampling is then active, entries are |
| * written into the larger diagnostic entries. |
| * This is typically the case for sample-data-blocks |
| * that are not full. Stop processing if the first |
| * invalid format was detected. |
| */ |
| if (!te->f) |
| break; |
| } |
| |
| /* Reset sample slot and advance to next sample */ |
| reset_sample_slot(sample, flags); |
| sample += sample_size; |
| } |
| } |
| |
| /* hw_perf_event_update() - Process sampling buffer |
| * @event: The perf event |
| * @flush_all: Flag to also flush partially filled sample-data-blocks |
| * |
| * Processes the sampling buffer and create perf event samples. |
| * The sampling buffer position are retrieved and saved in the TEAR_REG |
| * register of the specified perf event. |
| * |
| * Only full sample-data-blocks are processed. Specify the flash_all flag |
| * to also walk through partially filled sample-data-blocks. It is ignored |
| * if PERF_CPUM_SF_FULL_BLOCKS is set. The PERF_CPUM_SF_FULL_BLOCKS flag |
| * enforces the processing of full sample-data-blocks only (trailer entries |
| * with the block-full-indicator bit set). |
| */ |
| static void hw_perf_event_update(struct perf_event *event, int flush_all) |
| { |
| struct hw_perf_event *hwc = &event->hw; |
| struct hws_trailer_entry *te; |
| unsigned long *sdbt; |
| unsigned long long event_overflow, sampl_overflow, num_sdb, te_flags; |
| int done; |
| |
| if (flush_all && SDB_FULL_BLOCKS(hwc)) |
| flush_all = 0; |
| |
| sdbt = (unsigned long *) TEAR_REG(hwc); |
| done = event_overflow = sampl_overflow = num_sdb = 0; |
| while (!done) { |
| /* Get the trailer entry of the sample-data-block */ |
| te = (struct hws_trailer_entry *) trailer_entry_ptr(*sdbt); |
| |
| /* Leave loop if no more work to do (block full indicator) */ |
| if (!te->f) { |
| done = 1; |
| if (!flush_all) |
| break; |
| } |
| |
| /* Check the sample overflow count */ |
| if (te->overflow) |
| /* Account sample overflows and, if a particular limit |
| * is reached, extend the sampling buffer. |
| * For details, see sfb_account_overflows(). |
| */ |
| sampl_overflow += te->overflow; |
| |
| /* Timestamps are valid for full sample-data-blocks only */ |
| debug_sprintf_event(sfdbg, 6, "hw_perf_event_update: sdbt=%p " |
| "overflow=%llu timestamp=0x%llx\n", |
| sdbt, te->overflow, |
| (te->f) ? trailer_timestamp(te) : 0ULL); |
| |
| /* Collect all samples from a single sample-data-block and |
| * flag if an (perf) event overflow happened. If so, the PMU |
| * is stopped and remaining samples will be discarded. |
| */ |
| hw_collect_samples(event, sdbt, &event_overflow); |
| num_sdb++; |
| |
| /* Reset trailer (using compare-double-and-swap) */ |
| do { |
| te_flags = te->flags & ~SDB_TE_BUFFER_FULL_MASK; |
| te_flags |= SDB_TE_ALERT_REQ_MASK; |
| } while (!cmpxchg_double(&te->flags, &te->overflow, |
| te->flags, te->overflow, |
| te_flags, 0ULL)); |
| |
| /* Advance to next sample-data-block */ |
| sdbt++; |
| if (is_link_entry(sdbt)) |
| sdbt = get_next_sdbt(sdbt); |
| |
| /* Update event hardware registers */ |
| TEAR_REG(hwc) = (unsigned long) sdbt; |
| |
| /* Stop processing sample-data if all samples of the current |
| * sample-data-block were flushed even if it was not full. |
| */ |
| if (flush_all && done) |
| break; |
| |
| /* If an event overflow happened, discard samples by |
| * processing any remaining sample-data-blocks. |
| */ |
| if (event_overflow) |
| flush_all = 1; |
| } |
| |
| /* Account sample overflows in the event hardware structure */ |
| if (sampl_overflow) |
| OVERFLOW_REG(hwc) = DIV_ROUND_UP(OVERFLOW_REG(hwc) + |
| sampl_overflow, 1 + num_sdb); |
| if (sampl_overflow || event_overflow) |
| debug_sprintf_event(sfdbg, 4, "hw_perf_event_update: " |
| "overflow stats: sample=%llu event=%llu\n", |
| sampl_overflow, event_overflow); |
| } |
| |
| static void cpumsf_pmu_read(struct perf_event *event) |
| { |
| /* Nothing to do ... updates are interrupt-driven */ |
| } |
| |
| /* Activate sampling control. |
| * Next call of pmu_enable() starts sampling. |
| */ |
| static void cpumsf_pmu_start(struct perf_event *event, int flags) |
| { |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); |
| |
| if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED))) |
| return; |
| |
| if (flags & PERF_EF_RELOAD) |
| WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE)); |
| |
| perf_pmu_disable(event->pmu); |
| event->hw.state = 0; |
| cpuhw->lsctl.cs = 1; |
| if (SAMPL_DIAG_MODE(&event->hw)) |
| cpuhw->lsctl.cd = 1; |
| perf_pmu_enable(event->pmu); |
| } |
| |
| /* Deactivate sampling control. |
| * Next call of pmu_enable() stops sampling. |
| */ |
| static void cpumsf_pmu_stop(struct perf_event *event, int flags) |
| { |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); |
| |
| if (event->hw.state & PERF_HES_STOPPED) |
| return; |
| |
| perf_pmu_disable(event->pmu); |
| cpuhw->lsctl.cs = 0; |
| cpuhw->lsctl.cd = 0; |
| event->hw.state |= PERF_HES_STOPPED; |
| |
| if ((flags & PERF_EF_UPDATE) && !(event->hw.state & PERF_HES_UPTODATE)) { |
| hw_perf_event_update(event, 1); |
| event->hw.state |= PERF_HES_UPTODATE; |
| } |
| perf_pmu_enable(event->pmu); |
| } |
| |
| static int cpumsf_pmu_add(struct perf_event *event, int flags) |
| { |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); |
| int err; |
| |
| if (cpuhw->flags & PMU_F_IN_USE) |
| return -EAGAIN; |
| |
| if (!cpuhw->sfb.sdbt) |
| return -EINVAL; |
| |
| err = 0; |
| perf_pmu_disable(event->pmu); |
| |
| event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED; |
| |
| /* Set up sampling controls. Always program the sampling register |
| * using the SDB-table start. Reset TEAR_REG event hardware register |
| * that is used by hw_perf_event_update() to store the sampling buffer |
| * position after samples have been flushed. |
| */ |
| cpuhw->lsctl.s = 0; |
| cpuhw->lsctl.h = 1; |
| cpuhw->lsctl.tear = (unsigned long) cpuhw->sfb.sdbt; |
| cpuhw->lsctl.dear = *(unsigned long *) cpuhw->sfb.sdbt; |
| cpuhw->lsctl.interval = SAMPL_RATE(&event->hw); |
| hw_reset_registers(&event->hw, cpuhw->sfb.sdbt); |
| |
| /* Ensure sampling functions are in the disabled state. If disabled, |
| * switch on sampling enable control. */ |
| if (WARN_ON_ONCE(cpuhw->lsctl.es == 1 || cpuhw->lsctl.ed == 1)) { |
| err = -EAGAIN; |
| goto out; |
| } |
| cpuhw->lsctl.es = 1; |
| if (SAMPL_DIAG_MODE(&event->hw)) |
| cpuhw->lsctl.ed = 1; |
| |
| /* Set in_use flag and store event */ |
| cpuhw->event = event; |
| cpuhw->flags |= PMU_F_IN_USE; |
| |
| if (flags & PERF_EF_START) |
| cpumsf_pmu_start(event, PERF_EF_RELOAD); |
| out: |
| perf_event_update_userpage(event); |
| perf_pmu_enable(event->pmu); |
| return err; |
| } |
| |
| static void cpumsf_pmu_del(struct perf_event *event, int flags) |
| { |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); |
| |
| perf_pmu_disable(event->pmu); |
| cpumsf_pmu_stop(event, PERF_EF_UPDATE); |
| |
| cpuhw->lsctl.es = 0; |
| cpuhw->lsctl.ed = 0; |
| cpuhw->flags &= ~PMU_F_IN_USE; |
| cpuhw->event = NULL; |
| |
| perf_event_update_userpage(event); |
| perf_pmu_enable(event->pmu); |
| } |
| |
| CPUMF_EVENT_ATTR(SF, SF_CYCLES_BASIC, PERF_EVENT_CPUM_SF); |
| CPUMF_EVENT_ATTR(SF, SF_CYCLES_BASIC_DIAG, PERF_EVENT_CPUM_SF_DIAG); |
| |
| static struct attribute *cpumsf_pmu_events_attr[] = { |
| CPUMF_EVENT_PTR(SF, SF_CYCLES_BASIC), |
| NULL, |
| NULL, |
| }; |
| |
| PMU_FORMAT_ATTR(event, "config:0-63"); |
| |
| static struct attribute *cpumsf_pmu_format_attr[] = { |
| &format_attr_event.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group cpumsf_pmu_events_group = { |
| .name = "events", |
| .attrs = cpumsf_pmu_events_attr, |
| }; |
| static struct attribute_group cpumsf_pmu_format_group = { |
| .name = "format", |
| .attrs = cpumsf_pmu_format_attr, |
| }; |
| static const struct attribute_group *cpumsf_pmu_attr_groups[] = { |
| &cpumsf_pmu_events_group, |
| &cpumsf_pmu_format_group, |
| NULL, |
| }; |
| |
| static struct pmu cpumf_sampling = { |
| .pmu_enable = cpumsf_pmu_enable, |
| .pmu_disable = cpumsf_pmu_disable, |
| |
| .event_init = cpumsf_pmu_event_init, |
| .add = cpumsf_pmu_add, |
| .del = cpumsf_pmu_del, |
| |
| .start = cpumsf_pmu_start, |
| .stop = cpumsf_pmu_stop, |
| .read = cpumsf_pmu_read, |
| |
| .attr_groups = cpumsf_pmu_attr_groups, |
| }; |
| |
| static void cpumf_measurement_alert(struct ext_code ext_code, |
| unsigned int alert, unsigned long unused) |
| { |
| struct cpu_hw_sf *cpuhw; |
| |
| if (!(alert & CPU_MF_INT_SF_MASK)) |
| return; |
| inc_irq_stat(IRQEXT_CMS); |
| cpuhw = this_cpu_ptr(&cpu_hw_sf); |
| |
| /* Measurement alerts are shared and might happen when the PMU |
| * is not reserved. Ignore these alerts in this case. */ |
| if (!(cpuhw->flags & PMU_F_RESERVED)) |
| return; |
| |
| /* The processing below must take care of multiple alert events that |
| * might be indicated concurrently. */ |
| |
| /* Program alert request */ |
| if (alert & CPU_MF_INT_SF_PRA) { |
| if (cpuhw->flags & PMU_F_IN_USE) |
| hw_perf_event_update(cpuhw->event, 0); |
| else |
| WARN_ON_ONCE(!(cpuhw->flags & PMU_F_IN_USE)); |
| } |
| |
| /* Report measurement alerts only for non-PRA codes */ |
| if (alert != CPU_MF_INT_SF_PRA) |
| debug_sprintf_event(sfdbg, 6, "measurement alert: 0x%x\n", alert); |
| |
| /* Sampling authorization change request */ |
| if (alert & CPU_MF_INT_SF_SACA) |
| qsi(&cpuhw->qsi); |
| |
| /* Loss of sample data due to high-priority machine activities */ |
| if (alert & CPU_MF_INT_SF_LSDA) { |
| pr_err("Sample data was lost\n"); |
| cpuhw->flags |= PMU_F_ERR_LSDA; |
| sf_disable(); |
| } |
| |
| /* Invalid sampling buffer entry */ |
| if (alert & (CPU_MF_INT_SF_IAE|CPU_MF_INT_SF_ISE)) { |
| pr_err("A sampling buffer entry is incorrect (alert=0x%x)\n", |
| alert); |
| cpuhw->flags |= PMU_F_ERR_IBE; |
| sf_disable(); |
| } |
| } |
| static int cpusf_pmu_setup(unsigned int cpu, int flags) |
| { |
| /* Ignore the notification if no events are scheduled on the PMU. |
| * This might be racy... |
| */ |
| if (!atomic_read(&num_events)) |
| return 0; |
| |
| local_irq_disable(); |
| setup_pmc_cpu(&flags); |
| local_irq_enable(); |
| return 0; |
| } |
| |
| static int s390_pmu_sf_online_cpu(unsigned int cpu) |
| { |
| return cpusf_pmu_setup(cpu, PMC_INIT); |
| } |
| |
| static int s390_pmu_sf_offline_cpu(unsigned int cpu) |
| { |
| return cpusf_pmu_setup(cpu, PMC_RELEASE); |
| } |
| |
| static int param_get_sfb_size(char *buffer, const struct kernel_param *kp) |
| { |
| if (!cpum_sf_avail()) |
| return -ENODEV; |
| return sprintf(buffer, "%lu,%lu", CPUM_SF_MIN_SDB, CPUM_SF_MAX_SDB); |
| } |
| |
| static int param_set_sfb_size(const char *val, const struct kernel_param *kp) |
| { |
| int rc; |
| unsigned long min, max; |
| |
| if (!cpum_sf_avail()) |
| return -ENODEV; |
| if (!val || !strlen(val)) |
| return -EINVAL; |
| |
| /* Valid parameter values: "min,max" or "max" */ |
| min = CPUM_SF_MIN_SDB; |
| max = CPUM_SF_MAX_SDB; |
| if (strchr(val, ',')) |
| rc = (sscanf(val, "%lu,%lu", &min, &max) == 2) ? 0 : -EINVAL; |
| else |
| rc = kstrtoul(val, 10, &max); |
| |
| if (min < 2 || min >= max || max > get_num_physpages()) |
| rc = -EINVAL; |
| if (rc) |
| return rc; |
| |
| sfb_set_limits(min, max); |
| pr_info("The sampling buffer limits have changed to: " |
| "min=%lu max=%lu (diag=x%lu)\n", |
| CPUM_SF_MIN_SDB, CPUM_SF_MAX_SDB, CPUM_SF_SDB_DIAG_FACTOR); |
| return 0; |
| } |
| |
| #define param_check_sfb_size(name, p) __param_check(name, p, void) |
| static const struct kernel_param_ops param_ops_sfb_size = { |
| .set = param_set_sfb_size, |
| .get = param_get_sfb_size, |
| }; |
| |
| #define RS_INIT_FAILURE_QSI 0x0001 |
| #define RS_INIT_FAILURE_BSDES 0x0002 |
| #define RS_INIT_FAILURE_ALRT 0x0003 |
| #define RS_INIT_FAILURE_PERF 0x0004 |
| static void __init pr_cpumsf_err(unsigned int reason) |
| { |
| pr_err("Sampling facility support for perf is not available: " |
| "reason=%04x\n", reason); |
| } |
| |
| static int __init init_cpum_sampling_pmu(void) |
| { |
| struct hws_qsi_info_block si; |
| int err; |
| |
| if (!cpum_sf_avail()) |
| return -ENODEV; |
| |
| memset(&si, 0, sizeof(si)); |
| if (qsi(&si)) { |
| pr_cpumsf_err(RS_INIT_FAILURE_QSI); |
| return -ENODEV; |
| } |
| |
| if (si.bsdes != sizeof(struct hws_basic_entry)) { |
| pr_cpumsf_err(RS_INIT_FAILURE_BSDES); |
| return -EINVAL; |
| } |
| |
| if (si.ad) { |
| sfb_set_limits(CPUM_SF_MIN_SDB, CPUM_SF_MAX_SDB); |
| cpumsf_pmu_events_attr[1] = |
| CPUMF_EVENT_PTR(SF, SF_CYCLES_BASIC_DIAG); |
| } |
| |
| sfdbg = debug_register(KMSG_COMPONENT, 2, 1, 80); |
| if (!sfdbg) |
| pr_err("Registering for s390dbf failed\n"); |
| debug_register_view(sfdbg, &debug_sprintf_view); |
| |
| err = register_external_irq(EXT_IRQ_MEASURE_ALERT, |
| cpumf_measurement_alert); |
| if (err) { |
| pr_cpumsf_err(RS_INIT_FAILURE_ALRT); |
| goto out; |
| } |
| |
| err = perf_pmu_register(&cpumf_sampling, "cpum_sf", PERF_TYPE_RAW); |
| if (err) { |
| pr_cpumsf_err(RS_INIT_FAILURE_PERF); |
| unregister_external_irq(EXT_IRQ_MEASURE_ALERT, |
| cpumf_measurement_alert); |
| goto out; |
| } |
| |
| cpuhp_setup_state(CPUHP_AP_PERF_S390_SF_ONLINE, "perf/s390/sf:online", |
| s390_pmu_sf_online_cpu, s390_pmu_sf_offline_cpu); |
| out: |
| return err; |
| } |
| arch_initcall(init_cpum_sampling_pmu); |
| core_param(cpum_sfb_size, CPUM_SF_MAX_SDB, sfb_size, 0640); |