| /* |
| * Internal Thunderbolt Connection Manager. This is a firmware running on |
| * the Thunderbolt host controller performing most of the low-level |
| * handling. |
| * |
| * Copyright (C) 2017, Intel Corporation |
| * Authors: Michael Jamet <michael.jamet@intel.com> |
| * Mika Westerberg <mika.westerberg@linux.intel.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/mutex.h> |
| #include <linux/pci.h> |
| #include <linux/platform_data/x86/apple.h> |
| #include <linux/sizes.h> |
| #include <linux/slab.h> |
| #include <linux/workqueue.h> |
| |
| #include "ctl.h" |
| #include "nhi_regs.h" |
| #include "tb.h" |
| |
| #define PCIE2CIO_CMD 0x30 |
| #define PCIE2CIO_CMD_TIMEOUT BIT(31) |
| #define PCIE2CIO_CMD_START BIT(30) |
| #define PCIE2CIO_CMD_WRITE BIT(21) |
| #define PCIE2CIO_CMD_CS_MASK GENMASK(20, 19) |
| #define PCIE2CIO_CMD_CS_SHIFT 19 |
| #define PCIE2CIO_CMD_PORT_MASK GENMASK(18, 13) |
| #define PCIE2CIO_CMD_PORT_SHIFT 13 |
| |
| #define PCIE2CIO_WRDATA 0x34 |
| #define PCIE2CIO_RDDATA 0x38 |
| |
| #define PHY_PORT_CS1 0x37 |
| #define PHY_PORT_CS1_LINK_DISABLE BIT(14) |
| #define PHY_PORT_CS1_LINK_STATE_MASK GENMASK(29, 26) |
| #define PHY_PORT_CS1_LINK_STATE_SHIFT 26 |
| |
| #define ICM_TIMEOUT 5000 /* ms */ |
| #define ICM_MAX_LINK 4 |
| #define ICM_MAX_DEPTH 6 |
| |
| /** |
| * struct icm - Internal connection manager private data |
| * @request_lock: Makes sure only one message is send to ICM at time |
| * @rescan_work: Work used to rescan the surviving switches after resume |
| * @upstream_port: Pointer to the PCIe upstream port this host |
| * controller is connected. This is only set for systems |
| * where ICM needs to be started manually |
| * @vnd_cap: Vendor defined capability where PCIe2CIO mailbox resides |
| * (only set when @upstream_port is not %NULL) |
| * @safe_mode: ICM is in safe mode |
| * @is_supported: Checks if we can support ICM on this controller |
| * @get_mode: Read and return the ICM firmware mode (optional) |
| * @get_route: Find a route string for given switch |
| * @device_connected: Handle device connected ICM message |
| * @device_disconnected: Handle device disconnected ICM message |
| */ |
| struct icm { |
| struct mutex request_lock; |
| struct delayed_work rescan_work; |
| struct pci_dev *upstream_port; |
| int vnd_cap; |
| bool safe_mode; |
| bool (*is_supported)(struct tb *tb); |
| int (*get_mode)(struct tb *tb); |
| int (*get_route)(struct tb *tb, u8 link, u8 depth, u64 *route); |
| void (*device_connected)(struct tb *tb, |
| const struct icm_pkg_header *hdr); |
| void (*device_disconnected)(struct tb *tb, |
| const struct icm_pkg_header *hdr); |
| }; |
| |
| struct icm_notification { |
| struct work_struct work; |
| struct icm_pkg_header *pkg; |
| struct tb *tb; |
| }; |
| |
| static inline struct tb *icm_to_tb(struct icm *icm) |
| { |
| return ((void *)icm - sizeof(struct tb)); |
| } |
| |
| static inline u8 phy_port_from_route(u64 route, u8 depth) |
| { |
| return tb_switch_phy_port_from_link(route >> ((depth - 1) * 8)); |
| } |
| |
| static inline u8 dual_link_from_link(u8 link) |
| { |
| return link ? ((link - 1) ^ 0x01) + 1 : 0; |
| } |
| |
| static inline u64 get_route(u32 route_hi, u32 route_lo) |
| { |
| return (u64)route_hi << 32 | route_lo; |
| } |
| |
| static bool icm_match(const struct tb_cfg_request *req, |
| const struct ctl_pkg *pkg) |
| { |
| const struct icm_pkg_header *res_hdr = pkg->buffer; |
| const struct icm_pkg_header *req_hdr = req->request; |
| |
| if (pkg->frame.eof != req->response_type) |
| return false; |
| if (res_hdr->code != req_hdr->code) |
| return false; |
| |
| return true; |
| } |
| |
| static bool icm_copy(struct tb_cfg_request *req, const struct ctl_pkg *pkg) |
| { |
| const struct icm_pkg_header *hdr = pkg->buffer; |
| |
| if (hdr->packet_id < req->npackets) { |
| size_t offset = hdr->packet_id * req->response_size; |
| |
| memcpy(req->response + offset, pkg->buffer, req->response_size); |
| } |
| |
| return hdr->packet_id == hdr->total_packets - 1; |
| } |
| |
| static int icm_request(struct tb *tb, const void *request, size_t request_size, |
| void *response, size_t response_size, size_t npackets, |
| unsigned int timeout_msec) |
| { |
| struct icm *icm = tb_priv(tb); |
| int retries = 3; |
| |
| do { |
| struct tb_cfg_request *req; |
| struct tb_cfg_result res; |
| |
| req = tb_cfg_request_alloc(); |
| if (!req) |
| return -ENOMEM; |
| |
| req->match = icm_match; |
| req->copy = icm_copy; |
| req->request = request; |
| req->request_size = request_size; |
| req->request_type = TB_CFG_PKG_ICM_CMD; |
| req->response = response; |
| req->npackets = npackets; |
| req->response_size = response_size; |
| req->response_type = TB_CFG_PKG_ICM_RESP; |
| |
| mutex_lock(&icm->request_lock); |
| res = tb_cfg_request_sync(tb->ctl, req, timeout_msec); |
| mutex_unlock(&icm->request_lock); |
| |
| tb_cfg_request_put(req); |
| |
| if (res.err != -ETIMEDOUT) |
| return res.err == 1 ? -EIO : res.err; |
| |
| usleep_range(20, 50); |
| } while (retries--); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static bool icm_fr_is_supported(struct tb *tb) |
| { |
| return !x86_apple_machine; |
| } |
| |
| static inline int icm_fr_get_switch_index(u32 port) |
| { |
| int index; |
| |
| if ((port & ICM_PORT_TYPE_MASK) != TB_TYPE_PORT) |
| return 0; |
| |
| index = port >> ICM_PORT_INDEX_SHIFT; |
| return index != 0xff ? index : 0; |
| } |
| |
| static int icm_fr_get_route(struct tb *tb, u8 link, u8 depth, u64 *route) |
| { |
| struct icm_fr_pkg_get_topology_response *switches, *sw; |
| struct icm_fr_pkg_get_topology request = { |
| .hdr = { .code = ICM_GET_TOPOLOGY }, |
| }; |
| size_t npackets = ICM_GET_TOPOLOGY_PACKETS; |
| int ret, index; |
| u8 i; |
| |
| switches = kcalloc(npackets, sizeof(*switches), GFP_KERNEL); |
| if (!switches) |
| return -ENOMEM; |
| |
| ret = icm_request(tb, &request, sizeof(request), switches, |
| sizeof(*switches), npackets, ICM_TIMEOUT); |
| if (ret) |
| goto err_free; |
| |
| sw = &switches[0]; |
| index = icm_fr_get_switch_index(sw->ports[link]); |
| if (!index) { |
| ret = -ENODEV; |
| goto err_free; |
| } |
| |
| sw = &switches[index]; |
| for (i = 1; i < depth; i++) { |
| unsigned int j; |
| |
| if (!(sw->first_data & ICM_SWITCH_USED)) { |
| ret = -ENODEV; |
| goto err_free; |
| } |
| |
| for (j = 0; j < ARRAY_SIZE(sw->ports); j++) { |
| index = icm_fr_get_switch_index(sw->ports[j]); |
| if (index > sw->switch_index) { |
| sw = &switches[index]; |
| break; |
| } |
| } |
| } |
| |
| *route = get_route(sw->route_hi, sw->route_lo); |
| |
| err_free: |
| kfree(switches); |
| return ret; |
| } |
| |
| static int icm_fr_approve_switch(struct tb *tb, struct tb_switch *sw) |
| { |
| struct icm_fr_pkg_approve_device request; |
| struct icm_fr_pkg_approve_device reply; |
| int ret; |
| |
| memset(&request, 0, sizeof(request)); |
| memcpy(&request.ep_uuid, sw->uuid, sizeof(request.ep_uuid)); |
| request.hdr.code = ICM_APPROVE_DEVICE; |
| request.connection_id = sw->connection_id; |
| request.connection_key = sw->connection_key; |
| |
| memset(&reply, 0, sizeof(reply)); |
| /* Use larger timeout as establishing tunnels can take some time */ |
| ret = icm_request(tb, &request, sizeof(request), &reply, sizeof(reply), |
| 1, 10000); |
| if (ret) |
| return ret; |
| |
| if (reply.hdr.flags & ICM_FLAGS_ERROR) { |
| tb_warn(tb, "PCIe tunnel creation failed\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int icm_fr_add_switch_key(struct tb *tb, struct tb_switch *sw) |
| { |
| struct icm_fr_pkg_add_device_key request; |
| struct icm_fr_pkg_add_device_key_response reply; |
| int ret; |
| |
| memset(&request, 0, sizeof(request)); |
| memcpy(&request.ep_uuid, sw->uuid, sizeof(request.ep_uuid)); |
| request.hdr.code = ICM_ADD_DEVICE_KEY; |
| request.connection_id = sw->connection_id; |
| request.connection_key = sw->connection_key; |
| memcpy(request.key, sw->key, TB_SWITCH_KEY_SIZE); |
| |
| memset(&reply, 0, sizeof(reply)); |
| ret = icm_request(tb, &request, sizeof(request), &reply, sizeof(reply), |
| 1, ICM_TIMEOUT); |
| if (ret) |
| return ret; |
| |
| if (reply.hdr.flags & ICM_FLAGS_ERROR) { |
| tb_warn(tb, "Adding key to switch failed\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int icm_fr_challenge_switch_key(struct tb *tb, struct tb_switch *sw, |
| const u8 *challenge, u8 *response) |
| { |
| struct icm_fr_pkg_challenge_device request; |
| struct icm_fr_pkg_challenge_device_response reply; |
| int ret; |
| |
| memset(&request, 0, sizeof(request)); |
| memcpy(&request.ep_uuid, sw->uuid, sizeof(request.ep_uuid)); |
| request.hdr.code = ICM_CHALLENGE_DEVICE; |
| request.connection_id = sw->connection_id; |
| request.connection_key = sw->connection_key; |
| memcpy(request.challenge, challenge, TB_SWITCH_KEY_SIZE); |
| |
| memset(&reply, 0, sizeof(reply)); |
| ret = icm_request(tb, &request, sizeof(request), &reply, sizeof(reply), |
| 1, ICM_TIMEOUT); |
| if (ret) |
| return ret; |
| |
| if (reply.hdr.flags & ICM_FLAGS_ERROR) |
| return -EKEYREJECTED; |
| if (reply.hdr.flags & ICM_FLAGS_NO_KEY) |
| return -ENOKEY; |
| |
| memcpy(response, reply.response, TB_SWITCH_KEY_SIZE); |
| |
| return 0; |
| } |
| |
| static void remove_switch(struct tb_switch *sw) |
| { |
| struct tb_switch *parent_sw; |
| |
| parent_sw = tb_to_switch(sw->dev.parent); |
| tb_port_at(tb_route(sw), parent_sw)->remote = NULL; |
| tb_switch_remove(sw); |
| } |
| |
| static void |
| icm_fr_device_connected(struct tb *tb, const struct icm_pkg_header *hdr) |
| { |
| const struct icm_fr_event_device_connected *pkg = |
| (const struct icm_fr_event_device_connected *)hdr; |
| struct tb_switch *sw, *parent_sw; |
| struct icm *icm = tb_priv(tb); |
| bool authorized = false; |
| u8 link, depth; |
| u64 route; |
| int ret; |
| |
| link = pkg->link_info & ICM_LINK_INFO_LINK_MASK; |
| depth = (pkg->link_info & ICM_LINK_INFO_DEPTH_MASK) >> |
| ICM_LINK_INFO_DEPTH_SHIFT; |
| authorized = pkg->link_info & ICM_LINK_INFO_APPROVED; |
| |
| ret = icm->get_route(tb, link, depth, &route); |
| if (ret) { |
| tb_err(tb, "failed to find route string for switch at %u.%u\n", |
| link, depth); |
| return; |
| } |
| |
| sw = tb_switch_find_by_uuid(tb, &pkg->ep_uuid); |
| if (sw) { |
| u8 phy_port, sw_phy_port; |
| |
| parent_sw = tb_to_switch(sw->dev.parent); |
| sw_phy_port = phy_port_from_route(tb_route(sw), sw->depth); |
| phy_port = phy_port_from_route(route, depth); |
| |
| /* |
| * On resume ICM will send us connected events for the |
| * devices that still are present. However, that |
| * information might have changed for example by the |
| * fact that a switch on a dual-link connection might |
| * have been enumerated using the other link now. Make |
| * sure our book keeping matches that. |
| */ |
| if (sw->depth == depth && sw_phy_port == phy_port && |
| !!sw->authorized == authorized) { |
| tb_port_at(tb_route(sw), parent_sw)->remote = NULL; |
| tb_port_at(route, parent_sw)->remote = |
| tb_upstream_port(sw); |
| sw->config.route_hi = upper_32_bits(route); |
| sw->config.route_lo = lower_32_bits(route); |
| sw->connection_id = pkg->connection_id; |
| sw->connection_key = pkg->connection_key; |
| sw->link = link; |
| sw->depth = depth; |
| sw->is_unplugged = false; |
| tb_switch_put(sw); |
| return; |
| } |
| |
| /* |
| * User connected the same switch to another physical |
| * port or to another part of the topology. Remove the |
| * existing switch now before adding the new one. |
| */ |
| remove_switch(sw); |
| tb_switch_put(sw); |
| } |
| |
| /* |
| * If the switch was not found by UUID, look for a switch on |
| * same physical port (taking possible link aggregation into |
| * account) and depth. If we found one it is definitely a stale |
| * one so remove it first. |
| */ |
| sw = tb_switch_find_by_link_depth(tb, link, depth); |
| if (!sw) { |
| u8 dual_link; |
| |
| dual_link = dual_link_from_link(link); |
| if (dual_link) |
| sw = tb_switch_find_by_link_depth(tb, dual_link, depth); |
| } |
| if (sw) { |
| remove_switch(sw); |
| tb_switch_put(sw); |
| } |
| |
| parent_sw = tb_switch_find_by_link_depth(tb, link, depth - 1); |
| if (!parent_sw) { |
| tb_err(tb, "failed to find parent switch for %u.%u\n", |
| link, depth); |
| return; |
| } |
| |
| sw = tb_switch_alloc(tb, &parent_sw->dev, route); |
| if (!sw) { |
| tb_switch_put(parent_sw); |
| return; |
| } |
| |
| sw->uuid = kmemdup(&pkg->ep_uuid, sizeof(pkg->ep_uuid), GFP_KERNEL); |
| sw->connection_id = pkg->connection_id; |
| sw->connection_key = pkg->connection_key; |
| sw->link = link; |
| sw->depth = depth; |
| sw->authorized = authorized; |
| sw->security_level = (pkg->hdr.flags & ICM_FLAGS_SLEVEL_MASK) >> |
| ICM_FLAGS_SLEVEL_SHIFT; |
| |
| /* Link the two switches now */ |
| tb_port_at(route, parent_sw)->remote = tb_upstream_port(sw); |
| tb_upstream_port(sw)->remote = tb_port_at(route, parent_sw); |
| |
| ret = tb_switch_add(sw); |
| if (ret) { |
| tb_port_at(tb_route(sw), parent_sw)->remote = NULL; |
| tb_switch_put(sw); |
| } |
| tb_switch_put(parent_sw); |
| } |
| |
| static void |
| icm_fr_device_disconnected(struct tb *tb, const struct icm_pkg_header *hdr) |
| { |
| const struct icm_fr_event_device_disconnected *pkg = |
| (const struct icm_fr_event_device_disconnected *)hdr; |
| struct tb_switch *sw; |
| u8 link, depth; |
| |
| link = pkg->link_info & ICM_LINK_INFO_LINK_MASK; |
| depth = (pkg->link_info & ICM_LINK_INFO_DEPTH_MASK) >> |
| ICM_LINK_INFO_DEPTH_SHIFT; |
| |
| if (link > ICM_MAX_LINK || depth > ICM_MAX_DEPTH) { |
| tb_warn(tb, "invalid topology %u.%u, ignoring\n", link, depth); |
| return; |
| } |
| |
| sw = tb_switch_find_by_link_depth(tb, link, depth); |
| if (!sw) { |
| tb_warn(tb, "no switch exists at %u.%u, ignoring\n", link, |
| depth); |
| return; |
| } |
| |
| remove_switch(sw); |
| tb_switch_put(sw); |
| } |
| |
| static struct pci_dev *get_upstream_port(struct pci_dev *pdev) |
| { |
| struct pci_dev *parent; |
| |
| parent = pci_upstream_bridge(pdev); |
| while (parent) { |
| if (!pci_is_pcie(parent)) |
| return NULL; |
| if (pci_pcie_type(parent) == PCI_EXP_TYPE_UPSTREAM) |
| break; |
| parent = pci_upstream_bridge(parent); |
| } |
| |
| if (!parent) |
| return NULL; |
| |
| switch (parent->device) { |
| case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_BRIDGE: |
| case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_BRIDGE: |
| case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_BRIDGE: |
| case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_BRIDGE: |
| case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_BRIDGE: |
| return parent; |
| } |
| |
| return NULL; |
| } |
| |
| static bool icm_ar_is_supported(struct tb *tb) |
| { |
| struct pci_dev *upstream_port; |
| struct icm *icm = tb_priv(tb); |
| |
| /* |
| * Starting from Alpine Ridge we can use ICM on Apple machines |
| * as well. We just need to reset and re-enable it first. |
| */ |
| if (!x86_apple_machine) |
| return true; |
| |
| /* |
| * Find the upstream PCIe port in case we need to do reset |
| * through its vendor specific registers. |
| */ |
| upstream_port = get_upstream_port(tb->nhi->pdev); |
| if (upstream_port) { |
| int cap; |
| |
| cap = pci_find_ext_capability(upstream_port, |
| PCI_EXT_CAP_ID_VNDR); |
| if (cap > 0) { |
| icm->upstream_port = upstream_port; |
| icm->vnd_cap = cap; |
| |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| static int icm_ar_get_mode(struct tb *tb) |
| { |
| struct tb_nhi *nhi = tb->nhi; |
| int retries = 5; |
| u32 val; |
| |
| do { |
| val = ioread32(nhi->iobase + REG_FW_STS); |
| if (val & REG_FW_STS_NVM_AUTH_DONE) |
| break; |
| msleep(30); |
| } while (--retries); |
| |
| if (!retries) { |
| dev_err(&nhi->pdev->dev, "ICM firmware not authenticated\n"); |
| return -ENODEV; |
| } |
| |
| return nhi_mailbox_mode(nhi); |
| } |
| |
| static int icm_ar_get_route(struct tb *tb, u8 link, u8 depth, u64 *route) |
| { |
| struct icm_ar_pkg_get_route_response reply; |
| struct icm_ar_pkg_get_route request = { |
| .hdr = { .code = ICM_GET_ROUTE }, |
| .link_info = depth << ICM_LINK_INFO_DEPTH_SHIFT | link, |
| }; |
| int ret; |
| |
| memset(&reply, 0, sizeof(reply)); |
| ret = icm_request(tb, &request, sizeof(request), &reply, sizeof(reply), |
| 1, ICM_TIMEOUT); |
| if (ret) |
| return ret; |
| |
| if (reply.hdr.flags & ICM_FLAGS_ERROR) |
| return -EIO; |
| |
| *route = get_route(reply.route_hi, reply.route_lo); |
| return 0; |
| } |
| |
| static void icm_handle_notification(struct work_struct *work) |
| { |
| struct icm_notification *n = container_of(work, typeof(*n), work); |
| struct tb *tb = n->tb; |
| struct icm *icm = tb_priv(tb); |
| |
| mutex_lock(&tb->lock); |
| |
| switch (n->pkg->code) { |
| case ICM_EVENT_DEVICE_CONNECTED: |
| icm->device_connected(tb, n->pkg); |
| break; |
| case ICM_EVENT_DEVICE_DISCONNECTED: |
| icm->device_disconnected(tb, n->pkg); |
| break; |
| } |
| |
| mutex_unlock(&tb->lock); |
| |
| kfree(n->pkg); |
| kfree(n); |
| } |
| |
| static void icm_handle_event(struct tb *tb, enum tb_cfg_pkg_type type, |
| const void *buf, size_t size) |
| { |
| struct icm_notification *n; |
| |
| n = kmalloc(sizeof(*n), GFP_KERNEL); |
| if (!n) |
| return; |
| |
| INIT_WORK(&n->work, icm_handle_notification); |
| n->pkg = kmemdup(buf, size, GFP_KERNEL); |
| n->tb = tb; |
| |
| queue_work(tb->wq, &n->work); |
| } |
| |
| static int |
| __icm_driver_ready(struct tb *tb, enum tb_security_level *security_level) |
| { |
| struct icm_pkg_driver_ready_response reply; |
| struct icm_pkg_driver_ready request = { |
| .hdr.code = ICM_DRIVER_READY, |
| }; |
| unsigned int retries = 10; |
| int ret; |
| |
| memset(&reply, 0, sizeof(reply)); |
| ret = icm_request(tb, &request, sizeof(request), &reply, sizeof(reply), |
| 1, ICM_TIMEOUT); |
| if (ret) |
| return ret; |
| |
| if (security_level) |
| *security_level = reply.security_level & 0xf; |
| |
| /* |
| * Hold on here until the switch config space is accessible so |
| * that we can read root switch config successfully. |
| */ |
| do { |
| struct tb_cfg_result res; |
| u32 tmp; |
| |
| res = tb_cfg_read_raw(tb->ctl, &tmp, 0, 0, TB_CFG_SWITCH, |
| 0, 1, 100); |
| if (!res.err) |
| return 0; |
| |
| msleep(50); |
| } while (--retries); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int pci2cio_wait_completion(struct icm *icm, unsigned long timeout_msec) |
| { |
| unsigned long end = jiffies + msecs_to_jiffies(timeout_msec); |
| u32 cmd; |
| |
| do { |
| pci_read_config_dword(icm->upstream_port, |
| icm->vnd_cap + PCIE2CIO_CMD, &cmd); |
| if (!(cmd & PCIE2CIO_CMD_START)) { |
| if (cmd & PCIE2CIO_CMD_TIMEOUT) |
| break; |
| return 0; |
| } |
| |
| msleep(50); |
| } while (time_before(jiffies, end)); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int pcie2cio_read(struct icm *icm, enum tb_cfg_space cs, |
| unsigned int port, unsigned int index, u32 *data) |
| { |
| struct pci_dev *pdev = icm->upstream_port; |
| int ret, vnd_cap = icm->vnd_cap; |
| u32 cmd; |
| |
| cmd = index; |
| cmd |= (port << PCIE2CIO_CMD_PORT_SHIFT) & PCIE2CIO_CMD_PORT_MASK; |
| cmd |= (cs << PCIE2CIO_CMD_CS_SHIFT) & PCIE2CIO_CMD_CS_MASK; |
| cmd |= PCIE2CIO_CMD_START; |
| pci_write_config_dword(pdev, vnd_cap + PCIE2CIO_CMD, cmd); |
| |
| ret = pci2cio_wait_completion(icm, 5000); |
| if (ret) |
| return ret; |
| |
| pci_read_config_dword(pdev, vnd_cap + PCIE2CIO_RDDATA, data); |
| return 0; |
| } |
| |
| static int pcie2cio_write(struct icm *icm, enum tb_cfg_space cs, |
| unsigned int port, unsigned int index, u32 data) |
| { |
| struct pci_dev *pdev = icm->upstream_port; |
| int vnd_cap = icm->vnd_cap; |
| u32 cmd; |
| |
| pci_write_config_dword(pdev, vnd_cap + PCIE2CIO_WRDATA, data); |
| |
| cmd = index; |
| cmd |= (port << PCIE2CIO_CMD_PORT_SHIFT) & PCIE2CIO_CMD_PORT_MASK; |
| cmd |= (cs << PCIE2CIO_CMD_CS_SHIFT) & PCIE2CIO_CMD_CS_MASK; |
| cmd |= PCIE2CIO_CMD_WRITE | PCIE2CIO_CMD_START; |
| pci_write_config_dword(pdev, vnd_cap + PCIE2CIO_CMD, cmd); |
| |
| return pci2cio_wait_completion(icm, 5000); |
| } |
| |
| static int icm_firmware_reset(struct tb *tb, struct tb_nhi *nhi) |
| { |
| struct icm *icm = tb_priv(tb); |
| u32 val; |
| |
| /* Put ARC to wait for CIO reset event to happen */ |
| val = ioread32(nhi->iobase + REG_FW_STS); |
| val |= REG_FW_STS_CIO_RESET_REQ; |
| iowrite32(val, nhi->iobase + REG_FW_STS); |
| |
| /* Re-start ARC */ |
| val = ioread32(nhi->iobase + REG_FW_STS); |
| val |= REG_FW_STS_ICM_EN_INVERT; |
| val |= REG_FW_STS_ICM_EN_CPU; |
| iowrite32(val, nhi->iobase + REG_FW_STS); |
| |
| /* Trigger CIO reset now */ |
| return pcie2cio_write(icm, TB_CFG_SWITCH, 0, 0x50, BIT(9)); |
| } |
| |
| static int icm_firmware_start(struct tb *tb, struct tb_nhi *nhi) |
| { |
| unsigned int retries = 10; |
| int ret; |
| u32 val; |
| |
| /* Check if the ICM firmware is already running */ |
| val = ioread32(nhi->iobase + REG_FW_STS); |
| if (val & REG_FW_STS_ICM_EN) |
| return 0; |
| |
| dev_info(&nhi->pdev->dev, "starting ICM firmware\n"); |
| |
| ret = icm_firmware_reset(tb, nhi); |
| if (ret) |
| return ret; |
| |
| /* Wait until the ICM firmware tells us it is up and running */ |
| do { |
| /* Check that the ICM firmware is running */ |
| val = ioread32(nhi->iobase + REG_FW_STS); |
| if (val & REG_FW_STS_NVM_AUTH_DONE) |
| return 0; |
| |
| msleep(300); |
| } while (--retries); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int icm_reset_phy_port(struct tb *tb, int phy_port) |
| { |
| struct icm *icm = tb_priv(tb); |
| u32 state0, state1; |
| int port0, port1; |
| u32 val0, val1; |
| int ret; |
| |
| if (!icm->upstream_port) |
| return 0; |
| |
| if (phy_port) { |
| port0 = 3; |
| port1 = 4; |
| } else { |
| port0 = 1; |
| port1 = 2; |
| } |
| |
| /* |
| * Read link status of both null ports belonging to a single |
| * physical port. |
| */ |
| ret = pcie2cio_read(icm, TB_CFG_PORT, port0, PHY_PORT_CS1, &val0); |
| if (ret) |
| return ret; |
| ret = pcie2cio_read(icm, TB_CFG_PORT, port1, PHY_PORT_CS1, &val1); |
| if (ret) |
| return ret; |
| |
| state0 = val0 & PHY_PORT_CS1_LINK_STATE_MASK; |
| state0 >>= PHY_PORT_CS1_LINK_STATE_SHIFT; |
| state1 = val1 & PHY_PORT_CS1_LINK_STATE_MASK; |
| state1 >>= PHY_PORT_CS1_LINK_STATE_SHIFT; |
| |
| /* If they are both up we need to reset them now */ |
| if (state0 != TB_PORT_UP || state1 != TB_PORT_UP) |
| return 0; |
| |
| val0 |= PHY_PORT_CS1_LINK_DISABLE; |
| ret = pcie2cio_write(icm, TB_CFG_PORT, port0, PHY_PORT_CS1, val0); |
| if (ret) |
| return ret; |
| |
| val1 |= PHY_PORT_CS1_LINK_DISABLE; |
| ret = pcie2cio_write(icm, TB_CFG_PORT, port1, PHY_PORT_CS1, val1); |
| if (ret) |
| return ret; |
| |
| /* Wait a bit and then re-enable both ports */ |
| usleep_range(10, 100); |
| |
| ret = pcie2cio_read(icm, TB_CFG_PORT, port0, PHY_PORT_CS1, &val0); |
| if (ret) |
| return ret; |
| ret = pcie2cio_read(icm, TB_CFG_PORT, port1, PHY_PORT_CS1, &val1); |
| if (ret) |
| return ret; |
| |
| val0 &= ~PHY_PORT_CS1_LINK_DISABLE; |
| ret = pcie2cio_write(icm, TB_CFG_PORT, port0, PHY_PORT_CS1, val0); |
| if (ret) |
| return ret; |
| |
| val1 &= ~PHY_PORT_CS1_LINK_DISABLE; |
| return pcie2cio_write(icm, TB_CFG_PORT, port1, PHY_PORT_CS1, val1); |
| } |
| |
| static int icm_firmware_init(struct tb *tb) |
| { |
| struct icm *icm = tb_priv(tb); |
| struct tb_nhi *nhi = tb->nhi; |
| int ret; |
| |
| ret = icm_firmware_start(tb, nhi); |
| if (ret) { |
| dev_err(&nhi->pdev->dev, "could not start ICM firmware\n"); |
| return ret; |
| } |
| |
| if (icm->get_mode) { |
| ret = icm->get_mode(tb); |
| |
| switch (ret) { |
| case NHI_FW_SAFE_MODE: |
| icm->safe_mode = true; |
| break; |
| |
| case NHI_FW_CM_MODE: |
| /* Ask ICM to accept all Thunderbolt devices */ |
| nhi_mailbox_cmd(nhi, NHI_MAILBOX_ALLOW_ALL_DEVS, 0); |
| break; |
| |
| default: |
| tb_err(tb, "ICM firmware is in wrong mode: %u\n", ret); |
| return -ENODEV; |
| } |
| } |
| |
| /* |
| * Reset both physical ports if there is anything connected to |
| * them already. |
| */ |
| ret = icm_reset_phy_port(tb, 0); |
| if (ret) |
| dev_warn(&nhi->pdev->dev, "failed to reset links on port0\n"); |
| ret = icm_reset_phy_port(tb, 1); |
| if (ret) |
| dev_warn(&nhi->pdev->dev, "failed to reset links on port1\n"); |
| |
| return 0; |
| } |
| |
| static int icm_driver_ready(struct tb *tb) |
| { |
| struct icm *icm = tb_priv(tb); |
| int ret; |
| |
| ret = icm_firmware_init(tb); |
| if (ret) |
| return ret; |
| |
| if (icm->safe_mode) { |
| tb_info(tb, "Thunderbolt host controller is in safe mode.\n"); |
| tb_info(tb, "You need to update NVM firmware of the controller before it can be used.\n"); |
| tb_info(tb, "For latest updates check https://thunderbolttechnology.net/updates.\n"); |
| return 0; |
| } |
| |
| return __icm_driver_ready(tb, &tb->security_level); |
| } |
| |
| static int icm_suspend(struct tb *tb) |
| { |
| int ret; |
| |
| ret = nhi_mailbox_cmd(tb->nhi, NHI_MAILBOX_SAVE_DEVS, 0); |
| if (ret) |
| tb_info(tb, "Ignoring mailbox command error (%d) in %s\n", |
| ret, __func__); |
| |
| return 0; |
| } |
| |
| /* |
| * Mark all switches (except root switch) below this one unplugged. ICM |
| * firmware will send us an updated list of switches after we have send |
| * it driver ready command. If a switch is not in that list it will be |
| * removed when we perform rescan. |
| */ |
| static void icm_unplug_children(struct tb_switch *sw) |
| { |
| unsigned int i; |
| |
| if (tb_route(sw)) |
| sw->is_unplugged = true; |
| |
| for (i = 1; i <= sw->config.max_port_number; i++) { |
| struct tb_port *port = &sw->ports[i]; |
| |
| if (tb_is_upstream_port(port)) |
| continue; |
| if (!port->remote) |
| continue; |
| |
| icm_unplug_children(port->remote->sw); |
| } |
| } |
| |
| static void icm_free_unplugged_children(struct tb_switch *sw) |
| { |
| unsigned int i; |
| |
| for (i = 1; i <= sw->config.max_port_number; i++) { |
| struct tb_port *port = &sw->ports[i]; |
| |
| if (tb_is_upstream_port(port)) |
| continue; |
| if (!port->remote) |
| continue; |
| |
| if (port->remote->sw->is_unplugged) { |
| tb_switch_remove(port->remote->sw); |
| port->remote = NULL; |
| } else { |
| icm_free_unplugged_children(port->remote->sw); |
| } |
| } |
| } |
| |
| static void icm_rescan_work(struct work_struct *work) |
| { |
| struct icm *icm = container_of(work, struct icm, rescan_work.work); |
| struct tb *tb = icm_to_tb(icm); |
| |
| mutex_lock(&tb->lock); |
| if (tb->root_switch) |
| icm_free_unplugged_children(tb->root_switch); |
| mutex_unlock(&tb->lock); |
| } |
| |
| static void icm_complete(struct tb *tb) |
| { |
| struct icm *icm = tb_priv(tb); |
| |
| if (tb->nhi->going_away) |
| return; |
| |
| icm_unplug_children(tb->root_switch); |
| |
| /* |
| * Now all existing children should be resumed, start events |
| * from ICM to get updated status. |
| */ |
| __icm_driver_ready(tb, NULL); |
| |
| /* |
| * We do not get notifications of devices that have been |
| * unplugged during suspend so schedule rescan to clean them up |
| * if any. |
| */ |
| queue_delayed_work(tb->wq, &icm->rescan_work, msecs_to_jiffies(500)); |
| } |
| |
| static int icm_start(struct tb *tb) |
| { |
| struct icm *icm = tb_priv(tb); |
| int ret; |
| |
| if (icm->safe_mode) |
| tb->root_switch = tb_switch_alloc_safe_mode(tb, &tb->dev, 0); |
| else |
| tb->root_switch = tb_switch_alloc(tb, &tb->dev, 0); |
| if (!tb->root_switch) |
| return -ENODEV; |
| |
| /* |
| * NVM upgrade has not been tested on Apple systems and they |
| * don't provide images publicly either. To be on the safe side |
| * prevent root switch NVM upgrade on Macs for now. |
| */ |
| tb->root_switch->no_nvm_upgrade = x86_apple_machine; |
| |
| ret = tb_switch_add(tb->root_switch); |
| if (ret) |
| tb_switch_put(tb->root_switch); |
| |
| return ret; |
| } |
| |
| static void icm_stop(struct tb *tb) |
| { |
| struct icm *icm = tb_priv(tb); |
| |
| cancel_delayed_work(&icm->rescan_work); |
| tb_switch_remove(tb->root_switch); |
| tb->root_switch = NULL; |
| nhi_mailbox_cmd(tb->nhi, NHI_MAILBOX_DRV_UNLOADS, 0); |
| } |
| |
| static int icm_disconnect_pcie_paths(struct tb *tb) |
| { |
| return nhi_mailbox_cmd(tb->nhi, NHI_MAILBOX_DISCONNECT_PCIE_PATHS, 0); |
| } |
| |
| /* Falcon Ridge and Alpine Ridge */ |
| static const struct tb_cm_ops icm_fr_ops = { |
| .driver_ready = icm_driver_ready, |
| .start = icm_start, |
| .stop = icm_stop, |
| .suspend = icm_suspend, |
| .complete = icm_complete, |
| .handle_event = icm_handle_event, |
| .approve_switch = icm_fr_approve_switch, |
| .add_switch_key = icm_fr_add_switch_key, |
| .challenge_switch_key = icm_fr_challenge_switch_key, |
| .disconnect_pcie_paths = icm_disconnect_pcie_paths, |
| }; |
| |
| struct tb *icm_probe(struct tb_nhi *nhi) |
| { |
| struct icm *icm; |
| struct tb *tb; |
| |
| tb = tb_domain_alloc(nhi, sizeof(struct icm)); |
| if (!tb) |
| return NULL; |
| |
| icm = tb_priv(tb); |
| INIT_DELAYED_WORK(&icm->rescan_work, icm_rescan_work); |
| mutex_init(&icm->request_lock); |
| |
| switch (nhi->pdev->device) { |
| case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI: |
| case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI: |
| icm->is_supported = icm_fr_is_supported; |
| icm->get_route = icm_fr_get_route; |
| icm->device_connected = icm_fr_device_connected; |
| icm->device_disconnected = icm_fr_device_disconnected; |
| tb->cm_ops = &icm_fr_ops; |
| break; |
| |
| case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_NHI: |
| case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_NHI: |
| case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_NHI: |
| case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_NHI: |
| case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_NHI: |
| icm->is_supported = icm_ar_is_supported; |
| icm->get_mode = icm_ar_get_mode; |
| icm->get_route = icm_ar_get_route; |
| icm->device_connected = icm_fr_device_connected; |
| icm->device_disconnected = icm_fr_device_disconnected; |
| tb->cm_ops = &icm_fr_ops; |
| break; |
| } |
| |
| if (!icm->is_supported || !icm->is_supported(tb)) { |
| dev_dbg(&nhi->pdev->dev, "ICM not supported on this controller\n"); |
| tb_domain_put(tb); |
| return NULL; |
| } |
| |
| return tb; |
| } |