| /* |
| * linux/drivers/video/mmp/hw/mmp_ctrl.c |
| * Marvell MMP series Display Controller support |
| * |
| * Copyright (C) 2012 Marvell Technology Group Ltd. |
| * Authors: Guoqing Li <ligq@marvell.com> |
| * Lisa Du <cldu@marvell.com> |
| * Zhou Zhu <zzhu3@marvell.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/vmalloc.h> |
| #include <linux/uaccess.h> |
| #include <linux/kthread.h> |
| #include <linux/io.h> |
| |
| #include "mmp_ctrl.h" |
| |
| static irqreturn_t ctrl_handle_irq(int irq, void *dev_id) |
| { |
| struct mmphw_ctrl *ctrl = (struct mmphw_ctrl *)dev_id; |
| u32 isr, imask, tmp; |
| |
| isr = readl_relaxed(ctrl->reg_base + SPU_IRQ_ISR); |
| imask = readl_relaxed(ctrl->reg_base + SPU_IRQ_ENA); |
| |
| do { |
| /* clear clock only */ |
| tmp = readl_relaxed(ctrl->reg_base + SPU_IRQ_ISR); |
| if (tmp & isr) |
| writel_relaxed(~isr, ctrl->reg_base + SPU_IRQ_ISR); |
| } while ((isr = readl_relaxed(ctrl->reg_base + SPU_IRQ_ISR)) & imask); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static u32 fmt_to_reg(struct mmp_overlay *overlay, int pix_fmt) |
| { |
| u32 rbswap = 0, uvswap = 0, yuvswap = 0, |
| csc_en = 0, val = 0, |
| vid = overlay_is_vid(overlay); |
| |
| switch (pix_fmt) { |
| case PIXFMT_RGB565: |
| case PIXFMT_RGB1555: |
| case PIXFMT_RGB888PACK: |
| case PIXFMT_RGB888UNPACK: |
| case PIXFMT_RGBA888: |
| rbswap = 1; |
| break; |
| case PIXFMT_VYUY: |
| case PIXFMT_YVU422P: |
| case PIXFMT_YVU420P: |
| uvswap = 1; |
| break; |
| case PIXFMT_YUYV: |
| yuvswap = 1; |
| break; |
| default: |
| break; |
| } |
| |
| switch (pix_fmt) { |
| case PIXFMT_RGB565: |
| case PIXFMT_BGR565: |
| break; |
| case PIXFMT_RGB1555: |
| case PIXFMT_BGR1555: |
| val = 0x1; |
| break; |
| case PIXFMT_RGB888PACK: |
| case PIXFMT_BGR888PACK: |
| val = 0x2; |
| break; |
| case PIXFMT_RGB888UNPACK: |
| case PIXFMT_BGR888UNPACK: |
| val = 0x3; |
| break; |
| case PIXFMT_RGBA888: |
| case PIXFMT_BGRA888: |
| val = 0x4; |
| break; |
| case PIXFMT_UYVY: |
| case PIXFMT_VYUY: |
| case PIXFMT_YUYV: |
| val = 0x5; |
| csc_en = 1; |
| break; |
| case PIXFMT_YUV422P: |
| case PIXFMT_YVU422P: |
| val = 0x6; |
| csc_en = 1; |
| break; |
| case PIXFMT_YUV420P: |
| case PIXFMT_YVU420P: |
| val = 0x7; |
| csc_en = 1; |
| break; |
| default: |
| break; |
| } |
| |
| return (dma_palette(0) | dma_fmt(vid, val) | |
| dma_swaprb(vid, rbswap) | dma_swapuv(vid, uvswap) | |
| dma_swapyuv(vid, yuvswap) | dma_csc(vid, csc_en)); |
| } |
| |
| static void dmafetch_set_fmt(struct mmp_overlay *overlay) |
| { |
| u32 tmp; |
| struct mmp_path *path = overlay->path; |
| tmp = readl_relaxed(ctrl_regs(path) + dma_ctrl(0, path->id)); |
| tmp &= ~dma_mask(overlay_is_vid(overlay)); |
| tmp |= fmt_to_reg(overlay, overlay->win.pix_fmt); |
| writel_relaxed(tmp, ctrl_regs(path) + dma_ctrl(0, path->id)); |
| } |
| |
| static void overlay_set_win(struct mmp_overlay *overlay, struct mmp_win *win) |
| { |
| struct lcd_regs *regs = path_regs(overlay->path); |
| |
| /* assert win supported */ |
| memcpy(&overlay->win, win, sizeof(struct mmp_win)); |
| |
| mutex_lock(&overlay->access_ok); |
| |
| if (overlay_is_vid(overlay)) { |
| writel_relaxed(win->pitch[0], ®s->v_pitch_yc); |
| writel_relaxed(win->pitch[2] << 16 | |
| win->pitch[1], ®s->v_pitch_uv); |
| |
| writel_relaxed((win->ysrc << 16) | win->xsrc, ®s->v_size); |
| writel_relaxed((win->ydst << 16) | win->xdst, ®s->v_size_z); |
| writel_relaxed(win->ypos << 16 | win->xpos, ®s->v_start); |
| } else { |
| writel_relaxed(win->pitch[0], ®s->g_pitch); |
| |
| writel_relaxed((win->ysrc << 16) | win->xsrc, ®s->g_size); |
| writel_relaxed((win->ydst << 16) | win->xdst, ®s->g_size_z); |
| writel_relaxed(win->ypos << 16 | win->xpos, ®s->g_start); |
| } |
| |
| dmafetch_set_fmt(overlay); |
| mutex_unlock(&overlay->access_ok); |
| } |
| |
| static void dmafetch_onoff(struct mmp_overlay *overlay, int on) |
| { |
| u32 mask = overlay_is_vid(overlay) ? CFG_DMA_ENA_MASK : |
| CFG_GRA_ENA_MASK; |
| u32 enable = overlay_is_vid(overlay) ? CFG_DMA_ENA(1) : CFG_GRA_ENA(1); |
| u32 tmp; |
| struct mmp_path *path = overlay->path; |
| |
| mutex_lock(&overlay->access_ok); |
| tmp = readl_relaxed(ctrl_regs(path) + dma_ctrl(0, path->id)); |
| tmp &= ~mask; |
| tmp |= (on ? enable : 0); |
| writel(tmp, ctrl_regs(path) + dma_ctrl(0, path->id)); |
| mutex_unlock(&overlay->access_ok); |
| } |
| |
| static void path_enabledisable(struct mmp_path *path, int on) |
| { |
| u32 tmp; |
| mutex_lock(&path->access_ok); |
| tmp = readl_relaxed(ctrl_regs(path) + LCD_SCLK(path)); |
| if (on) |
| tmp &= ~SCLK_DISABLE; |
| else |
| tmp |= SCLK_DISABLE; |
| writel_relaxed(tmp, ctrl_regs(path) + LCD_SCLK(path)); |
| mutex_unlock(&path->access_ok); |
| } |
| |
| static void path_onoff(struct mmp_path *path, int on) |
| { |
| if (path->status == on) { |
| dev_info(path->dev, "path %s is already %s\n", |
| path->name, stat_name(path->status)); |
| return; |
| } |
| |
| if (on) { |
| path_enabledisable(path, 1); |
| |
| if (path->panel && path->panel->set_onoff) |
| path->panel->set_onoff(path->panel, 1); |
| } else { |
| if (path->panel && path->panel->set_onoff) |
| path->panel->set_onoff(path->panel, 0); |
| |
| path_enabledisable(path, 0); |
| } |
| path->status = on; |
| } |
| |
| static void overlay_set_onoff(struct mmp_overlay *overlay, int on) |
| { |
| if (overlay->status == on) { |
| dev_info(overlay_to_ctrl(overlay)->dev, "overlay %s is already %s\n", |
| overlay->path->name, stat_name(overlay->status)); |
| return; |
| } |
| overlay->status = on; |
| dmafetch_onoff(overlay, on); |
| if (overlay->path->ops.check_status(overlay->path) |
| != overlay->path->status) |
| path_onoff(overlay->path, on); |
| } |
| |
| static void overlay_set_fetch(struct mmp_overlay *overlay, int fetch_id) |
| { |
| overlay->dmafetch_id = fetch_id; |
| } |
| |
| static int overlay_set_addr(struct mmp_overlay *overlay, struct mmp_addr *addr) |
| { |
| struct lcd_regs *regs = path_regs(overlay->path); |
| |
| /* FIXME: assert addr supported */ |
| memcpy(&overlay->addr, addr, sizeof(struct mmp_addr)); |
| |
| if (overlay_is_vid(overlay)) { |
| writel_relaxed(addr->phys[0], ®s->v_y0); |
| writel_relaxed(addr->phys[1], ®s->v_u0); |
| writel_relaxed(addr->phys[2], ®s->v_v0); |
| } else |
| writel_relaxed(addr->phys[0], ®s->g_0); |
| |
| return overlay->addr.phys[0]; |
| } |
| |
| static void path_set_mode(struct mmp_path *path, struct mmp_mode *mode) |
| { |
| struct lcd_regs *regs = path_regs(path); |
| u32 total_x, total_y, vsync_ctrl, tmp, sclk_src, sclk_div, |
| link_config = path_to_path_plat(path)->link_config, |
| dsi_rbswap = path_to_path_plat(path)->link_config; |
| |
| /* FIXME: assert videomode supported */ |
| memcpy(&path->mode, mode, sizeof(struct mmp_mode)); |
| |
| mutex_lock(&path->access_ok); |
| |
| /* polarity of timing signals */ |
| tmp = readl_relaxed(ctrl_regs(path) + intf_ctrl(path->id)) & 0x1; |
| tmp |= mode->vsync_invert ? 0 : 0x8; |
| tmp |= mode->hsync_invert ? 0 : 0x4; |
| tmp |= link_config & CFG_DUMBMODE_MASK; |
| tmp |= CFG_DUMB_ENA(1); |
| writel_relaxed(tmp, ctrl_regs(path) + intf_ctrl(path->id)); |
| |
| /* interface rb_swap setting */ |
| tmp = readl_relaxed(ctrl_regs(path) + intf_rbswap_ctrl(path->id)) & |
| (~(CFG_INTFRBSWAP_MASK)); |
| tmp |= dsi_rbswap & CFG_INTFRBSWAP_MASK; |
| writel_relaxed(tmp, ctrl_regs(path) + intf_rbswap_ctrl(path->id)); |
| |
| writel_relaxed((mode->yres << 16) | mode->xres, ®s->screen_active); |
| writel_relaxed((mode->left_margin << 16) | mode->right_margin, |
| ®s->screen_h_porch); |
| writel_relaxed((mode->upper_margin << 16) | mode->lower_margin, |
| ®s->screen_v_porch); |
| total_x = mode->xres + mode->left_margin + mode->right_margin + |
| mode->hsync_len; |
| total_y = mode->yres + mode->upper_margin + mode->lower_margin + |
| mode->vsync_len; |
| writel_relaxed((total_y << 16) | total_x, ®s->screen_size); |
| |
| /* vsync ctrl */ |
| if (path->output_type == PATH_OUT_DSI) |
| vsync_ctrl = 0x01330133; |
| else |
| vsync_ctrl = ((mode->xres + mode->right_margin) << 16) |
| | (mode->xres + mode->right_margin); |
| writel_relaxed(vsync_ctrl, ®s->vsync_ctrl); |
| |
| /* set pixclock div */ |
| sclk_src = clk_get_rate(path_to_ctrl(path)->clk); |
| sclk_div = sclk_src / mode->pixclock_freq; |
| if (sclk_div * mode->pixclock_freq < sclk_src) |
| sclk_div++; |
| |
| dev_info(path->dev, "%s sclk_src %d sclk_div 0x%x pclk %d\n", |
| __func__, sclk_src, sclk_div, mode->pixclock_freq); |
| |
| tmp = readl_relaxed(ctrl_regs(path) + LCD_SCLK(path)); |
| tmp &= ~CLK_INT_DIV_MASK; |
| tmp |= sclk_div; |
| writel_relaxed(tmp, ctrl_regs(path) + LCD_SCLK(path)); |
| |
| mutex_unlock(&path->access_ok); |
| } |
| |
| static struct mmp_overlay_ops mmphw_overlay_ops = { |
| .set_fetch = overlay_set_fetch, |
| .set_onoff = overlay_set_onoff, |
| .set_win = overlay_set_win, |
| .set_addr = overlay_set_addr, |
| }; |
| |
| static void ctrl_set_default(struct mmphw_ctrl *ctrl) |
| { |
| u32 tmp, irq_mask; |
| |
| /* |
| * LCD Global control(LCD_TOP_CTRL) should be configed before |
| * any other LCD registers read/write, or there maybe issues. |
| */ |
| tmp = readl_relaxed(ctrl->reg_base + LCD_TOP_CTRL); |
| tmp |= 0xfff0; |
| writel_relaxed(tmp, ctrl->reg_base + LCD_TOP_CTRL); |
| |
| |
| /* disable all interrupts */ |
| irq_mask = path_imasks(0) | err_imask(0) | |
| path_imasks(1) | err_imask(1); |
| tmp = readl_relaxed(ctrl->reg_base + SPU_IRQ_ENA); |
| tmp &= ~irq_mask; |
| tmp |= irq_mask; |
| writel_relaxed(tmp, ctrl->reg_base + SPU_IRQ_ENA); |
| } |
| |
| static void path_set_default(struct mmp_path *path) |
| { |
| struct lcd_regs *regs = path_regs(path); |
| u32 dma_ctrl1, mask, tmp, path_config; |
| |
| path_config = path_to_path_plat(path)->path_config; |
| |
| /* Configure IOPAD: should be parallel only */ |
| if (PATH_OUT_PARALLEL == path->output_type) { |
| mask = CFG_IOPADMODE_MASK | CFG_BURST_MASK | CFG_BOUNDARY_MASK; |
| tmp = readl_relaxed(ctrl_regs(path) + SPU_IOPAD_CONTROL); |
| tmp &= ~mask; |
| tmp |= path_config; |
| writel_relaxed(tmp, ctrl_regs(path) + SPU_IOPAD_CONTROL); |
| } |
| |
| /* Select path clock source */ |
| tmp = readl_relaxed(ctrl_regs(path) + LCD_SCLK(path)); |
| tmp &= ~SCLK_SRC_SEL_MASK; |
| tmp |= path_config; |
| writel_relaxed(tmp, ctrl_regs(path) + LCD_SCLK(path)); |
| |
| /* |
| * Configure default bits: vsync triggers DMA, |
| * power save enable, configure alpha registers to |
| * display 100% graphics, and set pixel command. |
| */ |
| dma_ctrl1 = 0x2032ff81; |
| |
| dma_ctrl1 |= CFG_VSYNC_INV_MASK; |
| writel_relaxed(dma_ctrl1, ctrl_regs(path) + dma_ctrl(1, path->id)); |
| |
| /* Configure default register values */ |
| writel_relaxed(0x00000000, ®s->blank_color); |
| writel_relaxed(0x00000000, ®s->g_1); |
| writel_relaxed(0x00000000, ®s->g_start); |
| |
| /* |
| * 1.enable multiple burst request in DMA AXI |
| * bus arbiter for faster read if not tv path; |
| * 2.enable horizontal smooth filter; |
| */ |
| mask = CFG_GRA_HSMOOTH_MASK | CFG_DMA_HSMOOTH_MASK | CFG_ARBFAST_ENA(1); |
| tmp = readl_relaxed(ctrl_regs(path) + dma_ctrl(0, path->id)); |
| tmp |= mask; |
| if (PATH_TV == path->id) |
| tmp &= ~CFG_ARBFAST_ENA(1); |
| writel_relaxed(tmp, ctrl_regs(path) + dma_ctrl(0, path->id)); |
| } |
| |
| static int path_init(struct mmphw_path_plat *path_plat, |
| struct mmp_mach_path_config *config) |
| { |
| struct mmphw_ctrl *ctrl = path_plat->ctrl; |
| struct mmp_path_info *path_info; |
| struct mmp_path *path = NULL; |
| |
| dev_info(ctrl->dev, "%s: %s\n", __func__, config->name); |
| |
| /* init driver data */ |
| path_info = kzalloc(sizeof(struct mmp_path_info), GFP_KERNEL); |
| if (!path_info) { |
| dev_err(ctrl->dev, "%s: unable to alloc path_info for %s\n", |
| __func__, config->name); |
| return 0; |
| } |
| path_info->name = config->name; |
| path_info->id = path_plat->id; |
| path_info->dev = ctrl->dev; |
| path_info->overlay_num = config->overlay_num; |
| path_info->overlay_ops = &mmphw_overlay_ops; |
| path_info->set_mode = path_set_mode; |
| path_info->plat_data = path_plat; |
| |
| /* create/register platform device */ |
| path = mmp_register_path(path_info); |
| if (!path) { |
| kfree(path_info); |
| return 0; |
| } |
| path_plat->path = path; |
| path_plat->path_config = config->path_config; |
| path_plat->link_config = config->link_config; |
| path_plat->dsi_rbswap = config->dsi_rbswap; |
| path_set_default(path); |
| |
| kfree(path_info); |
| return 1; |
| } |
| |
| static void path_deinit(struct mmphw_path_plat *path_plat) |
| { |
| if (!path_plat) |
| return; |
| |
| mmp_unregister_path(path_plat->path); |
| } |
| |
| static int mmphw_probe(struct platform_device *pdev) |
| { |
| struct mmp_mach_plat_info *mi; |
| struct resource *res; |
| int ret, i, size, irq; |
| struct mmphw_path_plat *path_plat; |
| struct mmphw_ctrl *ctrl = NULL; |
| |
| /* get resources from platform data */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (res == NULL) { |
| dev_err(&pdev->dev, "%s: no IO memory defined\n", __func__); |
| ret = -ENOENT; |
| goto failed; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "%s: no IRQ defined\n", __func__); |
| ret = -ENOENT; |
| goto failed; |
| } |
| |
| /* get configs from platform data */ |
| mi = pdev->dev.platform_data; |
| if (mi == NULL || !mi->path_num || !mi->paths) { |
| dev_err(&pdev->dev, "%s: no platform data defined\n", __func__); |
| ret = -EINVAL; |
| goto failed; |
| } |
| |
| /* allocate */ |
| size = sizeof(struct mmphw_ctrl) + sizeof(struct mmphw_path_plat) * |
| mi->path_num; |
| ctrl = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); |
| if (!ctrl) { |
| ret = -ENOMEM; |
| goto failed; |
| } |
| |
| ctrl->name = mi->name; |
| ctrl->path_num = mi->path_num; |
| ctrl->dev = &pdev->dev; |
| ctrl->irq = irq; |
| platform_set_drvdata(pdev, ctrl); |
| mutex_init(&ctrl->access_ok); |
| |
| /* map registers.*/ |
| if (!devm_request_mem_region(ctrl->dev, res->start, |
| resource_size(res), ctrl->name)) { |
| dev_err(ctrl->dev, |
| "can't request region for resource %pR\n", res); |
| ret = -EINVAL; |
| goto failed; |
| } |
| |
| ctrl->reg_base = devm_ioremap_nocache(ctrl->dev, |
| res->start, resource_size(res)); |
| if (ctrl->reg_base == NULL) { |
| dev_err(ctrl->dev, "%s: res %pR map failed\n", __func__, res); |
| ret = -ENOMEM; |
| goto failed; |
| } |
| |
| /* request irq */ |
| ret = devm_request_irq(ctrl->dev, ctrl->irq, ctrl_handle_irq, |
| IRQF_SHARED, "lcd_controller", ctrl); |
| if (ret < 0) { |
| dev_err(ctrl->dev, "%s unable to request IRQ %d\n", |
| __func__, ctrl->irq); |
| ret = -ENXIO; |
| goto failed; |
| } |
| |
| /* get clock */ |
| ctrl->clk = devm_clk_get(ctrl->dev, mi->clk_name); |
| if (IS_ERR(ctrl->clk)) { |
| dev_err(ctrl->dev, "unable to get clk %s\n", mi->clk_name); |
| ret = -ENOENT; |
| goto failed; |
| } |
| clk_prepare_enable(ctrl->clk); |
| |
| /* init global regs */ |
| ctrl_set_default(ctrl); |
| |
| /* init pathes from machine info and register them */ |
| for (i = 0; i < ctrl->path_num; i++) { |
| /* get from config and machine info */ |
| path_plat = &ctrl->path_plats[i]; |
| path_plat->id = i; |
| path_plat->ctrl = ctrl; |
| |
| /* path init */ |
| if (!path_init(path_plat, &mi->paths[i])) { |
| ret = -EINVAL; |
| goto failed_path_init; |
| } |
| } |
| |
| #ifdef CONFIG_MMP_DISP_SPI |
| ret = lcd_spi_register(ctrl); |
| if (ret < 0) |
| goto failed_path_init; |
| #endif |
| |
| dev_info(ctrl->dev, "device init done\n"); |
| |
| return 0; |
| |
| failed_path_init: |
| for (i = 0; i < ctrl->path_num; i++) { |
| path_plat = &ctrl->path_plats[i]; |
| path_deinit(path_plat); |
| } |
| |
| clk_disable_unprepare(ctrl->clk); |
| failed: |
| dev_err(&pdev->dev, "device init failed\n"); |
| |
| return ret; |
| } |
| |
| static struct platform_driver mmphw_driver = { |
| .driver = { |
| .name = "mmp-disp", |
| }, |
| .probe = mmphw_probe, |
| }; |
| |
| static int mmphw_init(void) |
| { |
| return platform_driver_register(&mmphw_driver); |
| } |
| module_init(mmphw_init); |
| |
| MODULE_AUTHOR("Li Guoqing<ligq@marvell.com>"); |
| MODULE_DESCRIPTION("Framebuffer driver for mmp"); |
| MODULE_LICENSE("GPL"); |