| /* |
| * skl.c - Implementation of ASoC Intel SKL HD Audio driver |
| * |
| * Copyright (C) 2014-2015 Intel Corp |
| * Author: Jeeja KP <jeeja.kp@intel.com> |
| * |
| * Derived mostly from Intel HDA driver with following copyrights: |
| * Copyright (c) 2004 Takashi Iwai <tiwai@suse.de> |
| * PeiSen Hou <pshou@realtek.com.tw> |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/platform_device.h> |
| #include <linux/firmware.h> |
| #include <linux/delay.h> |
| #include <sound/pcm.h> |
| #include "../common/sst-acpi.h" |
| #include <sound/hda_register.h> |
| #include <sound/hdaudio.h> |
| #include <sound/hda_i915.h> |
| #include "skl.h" |
| #include "skl-sst-dsp.h" |
| #include "skl-sst-ipc.h" |
| |
| static struct skl_machine_pdata skl_dmic_data; |
| |
| /* |
| * initialize the PCI registers |
| */ |
| static void skl_update_pci_byte(struct pci_dev *pci, unsigned int reg, |
| unsigned char mask, unsigned char val) |
| { |
| unsigned char data; |
| |
| pci_read_config_byte(pci, reg, &data); |
| data &= ~mask; |
| data |= (val & mask); |
| pci_write_config_byte(pci, reg, data); |
| } |
| |
| static void skl_init_pci(struct skl *skl) |
| { |
| struct hdac_ext_bus *ebus = &skl->ebus; |
| |
| /* |
| * Clear bits 0-2 of PCI register TCSEL (at offset 0x44) |
| * TCSEL == Traffic Class Select Register, which sets PCI express QOS |
| * Ensuring these bits are 0 clears playback static on some HD Audio |
| * codecs. |
| * The PCI register TCSEL is defined in the Intel manuals. |
| */ |
| dev_dbg(ebus_to_hbus(ebus)->dev, "Clearing TCSEL\n"); |
| skl_update_pci_byte(skl->pci, AZX_PCIREG_TCSEL, 0x07, 0); |
| } |
| |
| static void update_pci_dword(struct pci_dev *pci, |
| unsigned int reg, u32 mask, u32 val) |
| { |
| u32 data = 0; |
| |
| pci_read_config_dword(pci, reg, &data); |
| data &= ~mask; |
| data |= (val & mask); |
| pci_write_config_dword(pci, reg, data); |
| } |
| |
| /* |
| * skl_enable_miscbdcge - enable/dsiable CGCTL.MISCBDCGE bits |
| * |
| * @dev: device pointer |
| * @enable: enable/disable flag |
| */ |
| static void skl_enable_miscbdcge(struct device *dev, bool enable) |
| { |
| struct pci_dev *pci = to_pci_dev(dev); |
| u32 val; |
| |
| val = enable ? AZX_CGCTL_MISCBDCGE_MASK : 0; |
| |
| update_pci_dword(pci, AZX_PCIREG_CGCTL, AZX_CGCTL_MISCBDCGE_MASK, val); |
| } |
| |
| /* |
| * While performing reset, controller may not come back properly causing |
| * issues, so recommendation is to set CGCTL.MISCBDCGE to 0 then do reset |
| * (init chip) and then again set CGCTL.MISCBDCGE to 1 |
| */ |
| static int skl_init_chip(struct hdac_bus *bus, bool full_reset) |
| { |
| int ret; |
| |
| skl_enable_miscbdcge(bus->dev, false); |
| ret = snd_hdac_bus_init_chip(bus, full_reset); |
| skl_enable_miscbdcge(bus->dev, true); |
| |
| return ret; |
| } |
| |
| void skl_update_d0i3c(struct device *dev, bool enable) |
| { |
| struct pci_dev *pci = to_pci_dev(dev); |
| struct hdac_ext_bus *ebus = pci_get_drvdata(pci); |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| u8 reg; |
| int timeout = 50; |
| |
| reg = snd_hdac_chip_readb(bus, VS_D0I3C); |
| /* Do not write to D0I3C until command in progress bit is cleared */ |
| while ((reg & AZX_REG_VS_D0I3C_CIP) && --timeout) { |
| udelay(10); |
| reg = snd_hdac_chip_readb(bus, VS_D0I3C); |
| } |
| |
| /* Highly unlikely. But if it happens, flag error explicitly */ |
| if (!timeout) { |
| dev_err(bus->dev, "Before D0I3C update: D0I3C CIP timeout\n"); |
| return; |
| } |
| |
| if (enable) |
| reg = reg | AZX_REG_VS_D0I3C_I3; |
| else |
| reg = reg & (~AZX_REG_VS_D0I3C_I3); |
| |
| snd_hdac_chip_writeb(bus, VS_D0I3C, reg); |
| |
| timeout = 50; |
| /* Wait for cmd in progress to be cleared before exiting the function */ |
| reg = snd_hdac_chip_readb(bus, VS_D0I3C); |
| while ((reg & AZX_REG_VS_D0I3C_CIP) && --timeout) { |
| udelay(10); |
| reg = snd_hdac_chip_readb(bus, VS_D0I3C); |
| } |
| |
| /* Highly unlikely. But if it happens, flag error explicitly */ |
| if (!timeout) { |
| dev_err(bus->dev, "After D0I3C update: D0I3C CIP timeout\n"); |
| return; |
| } |
| |
| dev_dbg(bus->dev, "D0I3C register = 0x%x\n", |
| snd_hdac_chip_readb(bus, VS_D0I3C)); |
| } |
| |
| /* called from IRQ */ |
| static void skl_stream_update(struct hdac_bus *bus, struct hdac_stream *hstr) |
| { |
| snd_pcm_period_elapsed(hstr->substream); |
| } |
| |
| static irqreturn_t skl_interrupt(int irq, void *dev_id) |
| { |
| struct hdac_ext_bus *ebus = dev_id; |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| u32 status; |
| |
| if (!pm_runtime_active(bus->dev)) |
| return IRQ_NONE; |
| |
| spin_lock(&bus->reg_lock); |
| |
| status = snd_hdac_chip_readl(bus, INTSTS); |
| if (status == 0 || status == 0xffffffff) { |
| spin_unlock(&bus->reg_lock); |
| return IRQ_NONE; |
| } |
| |
| /* clear rirb int */ |
| status = snd_hdac_chip_readb(bus, RIRBSTS); |
| if (status & RIRB_INT_MASK) { |
| if (status & RIRB_INT_RESPONSE) |
| snd_hdac_bus_update_rirb(bus); |
| snd_hdac_chip_writeb(bus, RIRBSTS, RIRB_INT_MASK); |
| } |
| |
| spin_unlock(&bus->reg_lock); |
| |
| return snd_hdac_chip_readl(bus, INTSTS) ? IRQ_WAKE_THREAD : IRQ_HANDLED; |
| } |
| |
| static irqreturn_t skl_threaded_handler(int irq, void *dev_id) |
| { |
| struct hdac_ext_bus *ebus = dev_id; |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| u32 status; |
| |
| status = snd_hdac_chip_readl(bus, INTSTS); |
| |
| snd_hdac_bus_handle_stream_irq(bus, status, skl_stream_update); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int skl_acquire_irq(struct hdac_ext_bus *ebus, int do_disconnect) |
| { |
| struct skl *skl = ebus_to_skl(ebus); |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| int ret; |
| |
| ret = request_threaded_irq(skl->pci->irq, skl_interrupt, |
| skl_threaded_handler, |
| IRQF_SHARED, |
| KBUILD_MODNAME, ebus); |
| if (ret) { |
| dev_err(bus->dev, |
| "unable to grab IRQ %d, disabling device\n", |
| skl->pci->irq); |
| return ret; |
| } |
| |
| bus->irq = skl->pci->irq; |
| pci_intx(skl->pci, 1); |
| |
| return 0; |
| } |
| |
| static int skl_suspend_late(struct device *dev) |
| { |
| struct pci_dev *pci = to_pci_dev(dev); |
| struct hdac_ext_bus *ebus = pci_get_drvdata(pci); |
| struct skl *skl = ebus_to_skl(ebus); |
| |
| return skl_suspend_late_dsp(skl); |
| } |
| |
| #ifdef CONFIG_PM |
| static int _skl_suspend(struct hdac_ext_bus *ebus) |
| { |
| struct skl *skl = ebus_to_skl(ebus); |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| struct pci_dev *pci = to_pci_dev(bus->dev); |
| int ret; |
| |
| snd_hdac_ext_bus_link_power_down_all(ebus); |
| |
| ret = skl_suspend_dsp(skl); |
| if (ret < 0) |
| return ret; |
| |
| snd_hdac_bus_stop_chip(bus); |
| update_pci_dword(pci, AZX_PCIREG_PGCTL, |
| AZX_PGCTL_LSRMD_MASK, AZX_PGCTL_LSRMD_MASK); |
| skl_enable_miscbdcge(bus->dev, false); |
| snd_hdac_bus_enter_link_reset(bus); |
| skl_enable_miscbdcge(bus->dev, true); |
| skl_cleanup_resources(skl); |
| |
| return 0; |
| } |
| |
| static int _skl_resume(struct hdac_ext_bus *ebus) |
| { |
| struct skl *skl = ebus_to_skl(ebus); |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| |
| skl_init_pci(skl); |
| skl_init_chip(bus, true); |
| |
| return skl_resume_dsp(skl); |
| } |
| #endif |
| |
| #ifdef CONFIG_PM_SLEEP |
| /* |
| * power management |
| */ |
| static int skl_suspend(struct device *dev) |
| { |
| struct pci_dev *pci = to_pci_dev(dev); |
| struct hdac_ext_bus *ebus = pci_get_drvdata(pci); |
| struct skl *skl = ebus_to_skl(ebus); |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| int ret = 0; |
| |
| /* |
| * Do not suspend if streams which are marked ignore suspend are |
| * running, we need to save the state for these and continue |
| */ |
| if (skl->supend_active) { |
| /* turn off the links and stop the CORB/RIRB DMA if it is On */ |
| snd_hdac_ext_bus_link_power_down_all(ebus); |
| |
| if (ebus->cmd_dma_state) |
| snd_hdac_bus_stop_cmd_io(&ebus->bus); |
| |
| enable_irq_wake(bus->irq); |
| pci_save_state(pci); |
| } else { |
| ret = _skl_suspend(ebus); |
| if (ret < 0) |
| return ret; |
| skl->skl_sst->fw_loaded = false; |
| } |
| |
| if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { |
| ret = snd_hdac_display_power(bus, false); |
| if (ret < 0) |
| dev_err(bus->dev, |
| "Cannot turn OFF display power on i915\n"); |
| } |
| |
| return ret; |
| } |
| |
| static int skl_resume(struct device *dev) |
| { |
| struct pci_dev *pci = to_pci_dev(dev); |
| struct hdac_ext_bus *ebus = pci_get_drvdata(pci); |
| struct skl *skl = ebus_to_skl(ebus); |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| struct hdac_ext_link *hlink = NULL; |
| int ret; |
| |
| /* Turned OFF in HDMI codec driver after codec reconfiguration */ |
| if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { |
| ret = snd_hdac_display_power(bus, true); |
| if (ret < 0) { |
| dev_err(bus->dev, |
| "Cannot turn on display power on i915\n"); |
| return ret; |
| } |
| } |
| |
| /* |
| * resume only when we are not in suspend active, otherwise need to |
| * restore the device |
| */ |
| if (skl->supend_active) { |
| pci_restore_state(pci); |
| snd_hdac_ext_bus_link_power_up_all(ebus); |
| disable_irq_wake(bus->irq); |
| /* |
| * turn On the links which are On before active suspend |
| * and start the CORB/RIRB DMA if On before |
| * active suspend. |
| */ |
| list_for_each_entry(hlink, &ebus->hlink_list, list) { |
| if (hlink->ref_count) |
| snd_hdac_ext_bus_link_power_up(hlink); |
| } |
| |
| if (ebus->cmd_dma_state) |
| snd_hdac_bus_init_cmd_io(&ebus->bus); |
| } else { |
| ret = _skl_resume(ebus); |
| |
| /* turn off the links which are off before suspend */ |
| list_for_each_entry(hlink, &ebus->hlink_list, list) { |
| if (!hlink->ref_count) |
| snd_hdac_ext_bus_link_power_down(hlink); |
| } |
| |
| if (!ebus->cmd_dma_state) |
| snd_hdac_bus_stop_cmd_io(&ebus->bus); |
| } |
| |
| return ret; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| #ifdef CONFIG_PM |
| static int skl_runtime_suspend(struct device *dev) |
| { |
| struct pci_dev *pci = to_pci_dev(dev); |
| struct hdac_ext_bus *ebus = pci_get_drvdata(pci); |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| |
| dev_dbg(bus->dev, "in %s\n", __func__); |
| |
| return _skl_suspend(ebus); |
| } |
| |
| static int skl_runtime_resume(struct device *dev) |
| { |
| struct pci_dev *pci = to_pci_dev(dev); |
| struct hdac_ext_bus *ebus = pci_get_drvdata(pci); |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| |
| dev_dbg(bus->dev, "in %s\n", __func__); |
| |
| return _skl_resume(ebus); |
| } |
| #endif /* CONFIG_PM */ |
| |
| static const struct dev_pm_ops skl_pm = { |
| SET_SYSTEM_SLEEP_PM_OPS(skl_suspend, skl_resume) |
| SET_RUNTIME_PM_OPS(skl_runtime_suspend, skl_runtime_resume, NULL) |
| .suspend_late = skl_suspend_late, |
| }; |
| |
| /* |
| * destructor |
| */ |
| static int skl_free(struct hdac_ext_bus *ebus) |
| { |
| struct skl *skl = ebus_to_skl(ebus); |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| |
| skl->init_done = 0; /* to be sure */ |
| |
| snd_hdac_ext_stop_streams(ebus); |
| |
| if (bus->irq >= 0) |
| free_irq(bus->irq, (void *)ebus); |
| snd_hdac_bus_free_stream_pages(bus); |
| snd_hdac_stream_free_all(ebus); |
| snd_hdac_link_free_all(ebus); |
| |
| if (bus->remap_addr) |
| iounmap(bus->remap_addr); |
| |
| pci_release_regions(skl->pci); |
| pci_disable_device(skl->pci); |
| |
| snd_hdac_ext_bus_exit(ebus); |
| |
| cancel_work_sync(&skl->probe_work); |
| if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) |
| snd_hdac_i915_exit(&ebus->bus); |
| |
| return 0; |
| } |
| |
| static int skl_machine_device_register(struct skl *skl, void *driver_data) |
| { |
| struct hdac_bus *bus = ebus_to_hbus(&skl->ebus); |
| struct platform_device *pdev; |
| struct sst_acpi_mach *mach = driver_data; |
| int ret; |
| |
| mach = sst_acpi_find_machine(mach); |
| if (mach == NULL) { |
| dev_err(bus->dev, "No matching machine driver found\n"); |
| return -ENODEV; |
| } |
| skl->fw_name = mach->fw_filename; |
| |
| pdev = platform_device_alloc(mach->drv_name, -1); |
| if (pdev == NULL) { |
| dev_err(bus->dev, "platform device alloc failed\n"); |
| return -EIO; |
| } |
| |
| ret = platform_device_add(pdev); |
| if (ret) { |
| dev_err(bus->dev, "failed to add machine device\n"); |
| platform_device_put(pdev); |
| return -EIO; |
| } |
| |
| if (mach->pdata) |
| dev_set_drvdata(&pdev->dev, mach->pdata); |
| |
| skl->i2s_dev = pdev; |
| |
| return 0; |
| } |
| |
| static void skl_machine_device_unregister(struct skl *skl) |
| { |
| if (skl->i2s_dev) |
| platform_device_unregister(skl->i2s_dev); |
| } |
| |
| static int skl_dmic_device_register(struct skl *skl) |
| { |
| struct hdac_bus *bus = ebus_to_hbus(&skl->ebus); |
| struct platform_device *pdev; |
| int ret; |
| |
| /* SKL has one dmic port, so allocate dmic device for this */ |
| pdev = platform_device_alloc("dmic-codec", -1); |
| if (!pdev) { |
| dev_err(bus->dev, "failed to allocate dmic device\n"); |
| return -ENOMEM; |
| } |
| |
| ret = platform_device_add(pdev); |
| if (ret) { |
| dev_err(bus->dev, "failed to add dmic device: %d\n", ret); |
| platform_device_put(pdev); |
| return ret; |
| } |
| skl->dmic_dev = pdev; |
| |
| return 0; |
| } |
| |
| static void skl_dmic_device_unregister(struct skl *skl) |
| { |
| if (skl->dmic_dev) |
| platform_device_unregister(skl->dmic_dev); |
| } |
| |
| /* |
| * Probe the given codec address |
| */ |
| static int probe_codec(struct hdac_ext_bus *ebus, int addr) |
| { |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| unsigned int cmd = (addr << 28) | (AC_NODE_ROOT << 20) | |
| (AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID; |
| unsigned int res = -1; |
| |
| mutex_lock(&bus->cmd_mutex); |
| snd_hdac_bus_send_cmd(bus, cmd); |
| snd_hdac_bus_get_response(bus, addr, &res); |
| mutex_unlock(&bus->cmd_mutex); |
| if (res == -1) |
| return -EIO; |
| dev_dbg(bus->dev, "codec #%d probed OK\n", addr); |
| |
| return snd_hdac_ext_bus_device_init(ebus, addr); |
| } |
| |
| /* Codec initialization */ |
| static void skl_codec_create(struct hdac_ext_bus *ebus) |
| { |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| int c, max_slots; |
| |
| max_slots = HDA_MAX_CODECS; |
| |
| /* First try to probe all given codec slots */ |
| for (c = 0; c < max_slots; c++) { |
| if ((bus->codec_mask & (1 << c))) { |
| if (probe_codec(ebus, c) < 0) { |
| /* |
| * Some BIOSen give you wrong codec addresses |
| * that don't exist |
| */ |
| dev_warn(bus->dev, |
| "Codec #%d probe error; disabling it...\n", c); |
| bus->codec_mask &= ~(1 << c); |
| /* |
| * More badly, accessing to a non-existing |
| * codec often screws up the controller bus, |
| * and disturbs the further communications. |
| * Thus if an error occurs during probing, |
| * better to reset the controller bus to get |
| * back to the sanity state. |
| */ |
| snd_hdac_bus_stop_chip(bus); |
| skl_init_chip(bus, true); |
| } |
| } |
| } |
| } |
| |
| static const struct hdac_bus_ops bus_core_ops = { |
| .command = snd_hdac_bus_send_cmd, |
| .get_response = snd_hdac_bus_get_response, |
| }; |
| |
| static int skl_i915_init(struct hdac_bus *bus) |
| { |
| int err; |
| |
| /* |
| * The HDMI codec is in GPU so we need to ensure that it is powered |
| * up and ready for probe |
| */ |
| err = snd_hdac_i915_init(bus); |
| if (err < 0) |
| return err; |
| |
| err = snd_hdac_display_power(bus, true); |
| if (err < 0) |
| dev_err(bus->dev, "Cannot turn on display power on i915\n"); |
| |
| return err; |
| } |
| |
| static void skl_probe_work(struct work_struct *work) |
| { |
| struct skl *skl = container_of(work, struct skl, probe_work); |
| struct hdac_ext_bus *ebus = &skl->ebus; |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| struct hdac_ext_link *hlink = NULL; |
| int err; |
| |
| if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { |
| err = skl_i915_init(bus); |
| if (err < 0) |
| return; |
| } |
| |
| err = skl_init_chip(bus, true); |
| if (err < 0) { |
| dev_err(bus->dev, "Init chip failed with err: %d\n", err); |
| goto out_err; |
| } |
| |
| /* codec detection */ |
| if (!bus->codec_mask) |
| dev_info(bus->dev, "no hda codecs found!\n"); |
| |
| /* create codec instances */ |
| skl_codec_create(ebus); |
| |
| if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { |
| err = snd_hdac_display_power(bus, false); |
| if (err < 0) { |
| dev_err(bus->dev, "Cannot turn off display power on i915\n"); |
| return; |
| } |
| } |
| |
| /* register platform dai and controls */ |
| err = skl_platform_register(bus->dev); |
| if (err < 0) |
| return; |
| /* |
| * we are done probing so decrement link counts |
| */ |
| list_for_each_entry(hlink, &ebus->hlink_list, list) |
| snd_hdac_ext_bus_link_put(ebus, hlink); |
| |
| /* configure PM */ |
| pm_runtime_put_noidle(bus->dev); |
| pm_runtime_allow(bus->dev); |
| skl->init_done = 1; |
| |
| return; |
| |
| out_err: |
| if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) |
| err = snd_hdac_display_power(bus, false); |
| } |
| |
| /* |
| * constructor |
| */ |
| static int skl_create(struct pci_dev *pci, |
| const struct hdac_io_ops *io_ops, |
| struct skl **rskl) |
| { |
| struct skl *skl; |
| struct hdac_ext_bus *ebus; |
| |
| int err; |
| |
| *rskl = NULL; |
| |
| err = pci_enable_device(pci); |
| if (err < 0) |
| return err; |
| |
| skl = devm_kzalloc(&pci->dev, sizeof(*skl), GFP_KERNEL); |
| if (!skl) { |
| pci_disable_device(pci); |
| return -ENOMEM; |
| } |
| ebus = &skl->ebus; |
| snd_hdac_ext_bus_init(ebus, &pci->dev, &bus_core_ops, io_ops); |
| ebus->bus.use_posbuf = 1; |
| skl->pci = pci; |
| INIT_WORK(&skl->probe_work, skl_probe_work); |
| |
| ebus->bus.bdl_pos_adj = 0; |
| |
| *rskl = skl; |
| |
| return 0; |
| } |
| |
| static int skl_first_init(struct hdac_ext_bus *ebus) |
| { |
| struct skl *skl = ebus_to_skl(ebus); |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| struct pci_dev *pci = skl->pci; |
| int err; |
| unsigned short gcap; |
| int cp_streams, pb_streams, start_idx; |
| |
| err = pci_request_regions(pci, "Skylake HD audio"); |
| if (err < 0) |
| return err; |
| |
| bus->addr = pci_resource_start(pci, 0); |
| bus->remap_addr = pci_ioremap_bar(pci, 0); |
| if (bus->remap_addr == NULL) { |
| dev_err(bus->dev, "ioremap error\n"); |
| return -ENXIO; |
| } |
| |
| skl_init_chip(bus, true); |
| |
| snd_hdac_bus_parse_capabilities(bus); |
| |
| if (skl_acquire_irq(ebus, 0) < 0) |
| return -EBUSY; |
| |
| pci_set_master(pci); |
| synchronize_irq(bus->irq); |
| |
| gcap = snd_hdac_chip_readw(bus, GCAP); |
| dev_dbg(bus->dev, "chipset global capabilities = 0x%x\n", gcap); |
| |
| /* allow 64bit DMA address if supported by H/W */ |
| if (!dma_set_mask(bus->dev, DMA_BIT_MASK(64))) { |
| dma_set_coherent_mask(bus->dev, DMA_BIT_MASK(64)); |
| } else { |
| dma_set_mask(bus->dev, DMA_BIT_MASK(32)); |
| dma_set_coherent_mask(bus->dev, DMA_BIT_MASK(32)); |
| } |
| |
| /* read number of streams from GCAP register */ |
| cp_streams = (gcap >> 8) & 0x0f; |
| pb_streams = (gcap >> 12) & 0x0f; |
| |
| if (!pb_streams && !cp_streams) |
| return -EIO; |
| |
| ebus->num_streams = cp_streams + pb_streams; |
| |
| /* initialize streams */ |
| snd_hdac_ext_stream_init_all |
| (ebus, 0, cp_streams, SNDRV_PCM_STREAM_CAPTURE); |
| start_idx = cp_streams; |
| snd_hdac_ext_stream_init_all |
| (ebus, start_idx, pb_streams, SNDRV_PCM_STREAM_PLAYBACK); |
| |
| err = snd_hdac_bus_alloc_stream_pages(bus); |
| if (err < 0) |
| return err; |
| |
| /* initialize chip */ |
| skl_init_pci(skl); |
| |
| return skl_init_chip(bus, true); |
| } |
| |
| static int skl_probe(struct pci_dev *pci, |
| const struct pci_device_id *pci_id) |
| { |
| struct skl *skl; |
| struct hdac_ext_bus *ebus = NULL; |
| struct hdac_bus *bus = NULL; |
| int err; |
| |
| /* we use ext core ops, so provide NULL for ops here */ |
| err = skl_create(pci, NULL, &skl); |
| if (err < 0) |
| return err; |
| |
| ebus = &skl->ebus; |
| bus = ebus_to_hbus(ebus); |
| |
| err = skl_first_init(ebus); |
| if (err < 0) |
| goto out_free; |
| |
| skl->pci_id = pci->device; |
| |
| device_disable_async_suspend(bus->dev); |
| |
| skl->nhlt = skl_nhlt_init(bus->dev); |
| |
| if (skl->nhlt == NULL) { |
| err = -ENODEV; |
| goto out_free; |
| } |
| |
| err = skl_nhlt_create_sysfs(skl); |
| if (err < 0) |
| goto out_nhlt_free; |
| |
| skl_nhlt_update_topology_bin(skl); |
| |
| pci_set_drvdata(skl->pci, ebus); |
| |
| skl_dmic_data.dmic_num = skl_get_dmic_geo(skl); |
| |
| /* check if dsp is there */ |
| if (bus->ppcap) { |
| err = skl_machine_device_register(skl, |
| (void *)pci_id->driver_data); |
| if (err < 0) |
| goto out_nhlt_free; |
| |
| err = skl_init_dsp(skl); |
| if (err < 0) { |
| dev_dbg(bus->dev, "error failed to register dsp\n"); |
| goto out_mach_free; |
| } |
| skl->skl_sst->enable_miscbdcge = skl_enable_miscbdcge; |
| |
| } |
| if (bus->mlcap) |
| snd_hdac_ext_bus_get_ml_capabilities(ebus); |
| |
| snd_hdac_bus_stop_chip(bus); |
| |
| /* create device for soc dmic */ |
| err = skl_dmic_device_register(skl); |
| if (err < 0) |
| goto out_dsp_free; |
| |
| schedule_work(&skl->probe_work); |
| |
| return 0; |
| |
| out_dsp_free: |
| skl_free_dsp(skl); |
| out_mach_free: |
| skl_machine_device_unregister(skl); |
| out_nhlt_free: |
| skl_nhlt_free(skl->nhlt); |
| out_free: |
| skl_free(ebus); |
| |
| return err; |
| } |
| |
| static void skl_shutdown(struct pci_dev *pci) |
| { |
| struct hdac_ext_bus *ebus = pci_get_drvdata(pci); |
| struct hdac_bus *bus = ebus_to_hbus(ebus); |
| struct hdac_stream *s; |
| struct hdac_ext_stream *stream; |
| struct skl *skl; |
| |
| if (ebus == NULL) |
| return; |
| |
| skl = ebus_to_skl(ebus); |
| |
| if (!skl->init_done) |
| return; |
| |
| snd_hdac_ext_stop_streams(ebus); |
| list_for_each_entry(s, &bus->stream_list, list) { |
| stream = stream_to_hdac_ext_stream(s); |
| snd_hdac_ext_stream_decouple(ebus, stream, false); |
| } |
| |
| snd_hdac_bus_stop_chip(bus); |
| } |
| |
| static void skl_remove(struct pci_dev *pci) |
| { |
| struct hdac_ext_bus *ebus = pci_get_drvdata(pci); |
| struct skl *skl = ebus_to_skl(ebus); |
| |
| release_firmware(skl->tplg); |
| |
| pm_runtime_get_noresume(&pci->dev); |
| |
| /* codec removal, invoke bus_device_remove */ |
| snd_hdac_ext_bus_device_remove(ebus); |
| |
| skl->debugfs = NULL; |
| skl_platform_unregister(&pci->dev); |
| skl_free_dsp(skl); |
| skl_machine_device_unregister(skl); |
| skl_dmic_device_unregister(skl); |
| skl_nhlt_remove_sysfs(skl); |
| skl_nhlt_free(skl->nhlt); |
| skl_free(ebus); |
| dev_set_drvdata(&pci->dev, NULL); |
| } |
| |
| static struct sst_codecs skl_codecs = { |
| .num_codecs = 1, |
| .codecs = {"10508825"} |
| }; |
| |
| static struct sst_codecs kbl_codecs = { |
| .num_codecs = 1, |
| .codecs = {"10508825"} |
| }; |
| |
| static struct sst_codecs bxt_codecs = { |
| .num_codecs = 1, |
| .codecs = {"MX98357A"} |
| }; |
| |
| static struct sst_codecs kbl_poppy_codecs = { |
| .num_codecs = 1, |
| .codecs = {"10EC5663"} |
| }; |
| |
| static struct sst_codecs kbl_5663_5514_codecs = { |
| .num_codecs = 2, |
| .codecs = {"10EC5663", "10EC5514"} |
| }; |
| |
| |
| static struct sst_acpi_mach sst_skl_devdata[] = { |
| { |
| .id = "INT343A", |
| .drv_name = "skl_alc286s_i2s", |
| .fw_filename = "intel/dsp_fw_release.bin", |
| }, |
| { |
| .id = "INT343B", |
| .drv_name = "skl_n88l25_s4567", |
| .fw_filename = "intel/dsp_fw_release.bin", |
| .machine_quirk = sst_acpi_codec_list, |
| .quirk_data = &skl_codecs, |
| .pdata = &skl_dmic_data |
| }, |
| { |
| .id = "MX98357A", |
| .drv_name = "skl_n88l25_m98357a", |
| .fw_filename = "intel/dsp_fw_release.bin", |
| .machine_quirk = sst_acpi_codec_list, |
| .quirk_data = &skl_codecs, |
| .pdata = &skl_dmic_data |
| }, |
| {} |
| }; |
| |
| static struct sst_acpi_mach sst_bxtp_devdata[] = { |
| { |
| .id = "INT343A", |
| .drv_name = "bxt_alc298s_i2s", |
| .fw_filename = "intel/dsp_fw_bxtn.bin", |
| }, |
| { |
| .id = "DLGS7219", |
| .drv_name = "bxt_da7219_max98357a_i2s", |
| .fw_filename = "intel/dsp_fw_bxtn.bin", |
| .machine_quirk = sst_acpi_codec_list, |
| .quirk_data = &bxt_codecs, |
| }, |
| {} |
| }; |
| |
| static struct sst_acpi_mach sst_kbl_devdata[] = { |
| { |
| .id = "INT343A", |
| .drv_name = "kbl_alc286s_i2s", |
| .fw_filename = "intel/dsp_fw_kbl.bin", |
| }, |
| { |
| .id = "INT343B", |
| .drv_name = "kbl_n88l25_s4567", |
| .fw_filename = "intel/dsp_fw_kbl.bin", |
| .machine_quirk = sst_acpi_codec_list, |
| .quirk_data = &kbl_codecs, |
| .pdata = &skl_dmic_data |
| }, |
| { |
| .id = "MX98357A", |
| .drv_name = "kbl_n88l25_m98357a", |
| .fw_filename = "intel/dsp_fw_kbl.bin", |
| .machine_quirk = sst_acpi_codec_list, |
| .quirk_data = &kbl_codecs, |
| .pdata = &skl_dmic_data |
| }, |
| { |
| .id = "MX98927", |
| .drv_name = "kbl_r5514_5663_max", |
| .fw_filename = "intel/dsp_fw_kbl.bin", |
| .machine_quirk = sst_acpi_codec_list, |
| .quirk_data = &kbl_5663_5514_codecs, |
| .pdata = &skl_dmic_data |
| }, |
| { |
| .id = "MX98927", |
| .drv_name = "kbl_rt5663_m98927", |
| .fw_filename = "intel/dsp_fw_kbl.bin", |
| .machine_quirk = sst_acpi_codec_list, |
| .quirk_data = &kbl_poppy_codecs, |
| .pdata = &skl_dmic_data |
| }, |
| { |
| .id = "10EC5663", |
| .drv_name = "kbl_rt5663", |
| .fw_filename = "intel/dsp_fw_kbl.bin", |
| }, |
| |
| {} |
| }; |
| |
| static struct sst_acpi_mach sst_glk_devdata[] = { |
| { |
| .id = "INT343A", |
| .drv_name = "glk_alc298s_i2s", |
| .fw_filename = "intel/dsp_fw_glk.bin", |
| }, |
| {} |
| }; |
| |
| static const struct sst_acpi_mach sst_cnl_devdata[] = { |
| { |
| .id = "INT34C2", |
| .drv_name = "cnl_rt274", |
| .fw_filename = "intel/dsp_fw_cnl.bin", |
| }, |
| }; |
| |
| /* PCI IDs */ |
| static const struct pci_device_id skl_ids[] = { |
| /* Sunrise Point-LP */ |
| { PCI_DEVICE(0x8086, 0x9d70), |
| .driver_data = (unsigned long)&sst_skl_devdata}, |
| /* BXT-P */ |
| { PCI_DEVICE(0x8086, 0x5a98), |
| .driver_data = (unsigned long)&sst_bxtp_devdata}, |
| /* KBL */ |
| { PCI_DEVICE(0x8086, 0x9D71), |
| .driver_data = (unsigned long)&sst_kbl_devdata}, |
| /* GLK */ |
| { PCI_DEVICE(0x8086, 0x3198), |
| .driver_data = (unsigned long)&sst_glk_devdata}, |
| /* CNL */ |
| { PCI_DEVICE(0x8086, 0x9dc8), |
| .driver_data = (unsigned long)&sst_cnl_devdata}, |
| { 0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, skl_ids); |
| |
| /* pci_driver definition */ |
| static struct pci_driver skl_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = skl_ids, |
| .probe = skl_probe, |
| .remove = skl_remove, |
| .shutdown = skl_shutdown, |
| .driver = { |
| .pm = &skl_pm, |
| }, |
| }; |
| module_pci_driver(skl_driver); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("Intel Skylake ASoC HDA driver"); |