| /* |
| * Copyright (C) 2012 Avionic Design GmbH |
| * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_panel.h> |
| #include "drm.h" |
| |
| int tegra_output_connector_get_modes(struct drm_connector *connector) |
| { |
| struct tegra_output *output = connector_to_output(connector); |
| struct edid *edid = NULL; |
| int err = 0; |
| |
| /* |
| * If the panel provides one or more modes, use them exclusively and |
| * ignore any other means of obtaining a mode. |
| */ |
| if (output->panel) { |
| err = output->panel->funcs->get_modes(output->panel); |
| if (err > 0) |
| return err; |
| } |
| |
| if (output->edid) |
| edid = kmemdup(output->edid, sizeof(*edid), GFP_KERNEL); |
| else if (output->ddc) |
| edid = drm_get_edid(connector, output->ddc); |
| |
| drm_mode_connector_update_edid_property(connector, edid); |
| |
| if (edid) { |
| err = drm_add_edid_modes(connector, edid); |
| drm_edid_to_eld(connector, edid); |
| kfree(edid); |
| } |
| |
| return err; |
| } |
| |
| enum drm_connector_status |
| tegra_output_connector_detect(struct drm_connector *connector, bool force) |
| { |
| struct tegra_output *output = connector_to_output(connector); |
| enum drm_connector_status status = connector_status_unknown; |
| |
| if (gpio_is_valid(output->hpd_gpio)) { |
| if (output->hpd_gpio_flags & OF_GPIO_ACTIVE_LOW) { |
| if (gpio_get_value(output->hpd_gpio) != 0) |
| status = connector_status_disconnected; |
| else |
| status = connector_status_connected; |
| } else { |
| if (gpio_get_value(output->hpd_gpio) == 0) |
| status = connector_status_disconnected; |
| else |
| status = connector_status_connected; |
| } |
| } else { |
| if (!output->panel) |
| status = connector_status_disconnected; |
| else |
| status = connector_status_connected; |
| } |
| |
| return status; |
| } |
| |
| void tegra_output_connector_destroy(struct drm_connector *connector) |
| { |
| drm_connector_unregister(connector); |
| drm_connector_cleanup(connector); |
| } |
| |
| void tegra_output_encoder_destroy(struct drm_encoder *encoder) |
| { |
| drm_encoder_cleanup(encoder); |
| } |
| |
| static irqreturn_t hpd_irq(int irq, void *data) |
| { |
| struct tegra_output *output = data; |
| |
| if (output->connector.dev) |
| drm_helper_hpd_irq_event(output->connector.dev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| int tegra_output_probe(struct tegra_output *output) |
| { |
| struct device_node *ddc, *panel; |
| int err, size; |
| |
| if (!output->of_node) |
| output->of_node = output->dev->of_node; |
| |
| panel = of_parse_phandle(output->of_node, "nvidia,panel", 0); |
| if (panel) { |
| output->panel = of_drm_find_panel(panel); |
| if (!output->panel) |
| return -EPROBE_DEFER; |
| |
| of_node_put(panel); |
| } |
| |
| output->edid = of_get_property(output->of_node, "nvidia,edid", &size); |
| |
| ddc = of_parse_phandle(output->of_node, "nvidia,ddc-i2c-bus", 0); |
| if (ddc) { |
| output->ddc = of_find_i2c_adapter_by_node(ddc); |
| if (!output->ddc) { |
| err = -EPROBE_DEFER; |
| of_node_put(ddc); |
| return err; |
| } |
| |
| of_node_put(ddc); |
| } |
| |
| output->hpd_gpio = of_get_named_gpio_flags(output->of_node, |
| "nvidia,hpd-gpio", 0, |
| &output->hpd_gpio_flags); |
| if (gpio_is_valid(output->hpd_gpio)) { |
| unsigned long flags; |
| |
| err = gpio_request_one(output->hpd_gpio, GPIOF_DIR_IN, |
| "HDMI hotplug detect"); |
| if (err < 0) { |
| dev_err(output->dev, "gpio_request_one(): %d\n", err); |
| return err; |
| } |
| |
| err = gpio_to_irq(output->hpd_gpio); |
| if (err < 0) { |
| dev_err(output->dev, "gpio_to_irq(): %d\n", err); |
| gpio_free(output->hpd_gpio); |
| return err; |
| } |
| |
| output->hpd_irq = err; |
| |
| flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | |
| IRQF_ONESHOT; |
| |
| err = request_threaded_irq(output->hpd_irq, NULL, hpd_irq, |
| flags, "hpd", output); |
| if (err < 0) { |
| dev_err(output->dev, "failed to request IRQ#%u: %d\n", |
| output->hpd_irq, err); |
| gpio_free(output->hpd_gpio); |
| return err; |
| } |
| |
| output->connector.polled = DRM_CONNECTOR_POLL_HPD; |
| |
| /* |
| * Disable the interrupt until the connector has been |
| * initialized to avoid a race in the hotplug interrupt |
| * handler. |
| */ |
| disable_irq(output->hpd_irq); |
| } |
| |
| return 0; |
| } |
| |
| void tegra_output_remove(struct tegra_output *output) |
| { |
| if (gpio_is_valid(output->hpd_gpio)) { |
| free_irq(output->hpd_irq, output); |
| gpio_free(output->hpd_gpio); |
| } |
| |
| if (output->ddc) |
| put_device(&output->ddc->dev); |
| } |
| |
| int tegra_output_init(struct drm_device *drm, struct tegra_output *output) |
| { |
| int err; |
| |
| if (output->panel) { |
| err = drm_panel_attach(output->panel, &output->connector); |
| if (err < 0) |
| return err; |
| } |
| |
| /* |
| * The connector is now registered and ready to receive hotplug events |
| * so the hotplug interrupt can be enabled. |
| */ |
| if (gpio_is_valid(output->hpd_gpio)) |
| enable_irq(output->hpd_irq); |
| |
| return 0; |
| } |
| |
| void tegra_output_exit(struct tegra_output *output) |
| { |
| /* |
| * The connector is going away, so the interrupt must be disabled to |
| * prevent the hotplug interrupt handler from potentially crashing. |
| */ |
| if (gpio_is_valid(output->hpd_gpio)) |
| disable_irq(output->hpd_irq); |
| |
| if (output->panel) |
| drm_panel_detach(output->panel); |
| } |