| * AMD 10GbE PHY driver (amd-xgbe-phy) | |
| Required properties: | |
| - compatible: Should be "amd,xgbe-phy-seattle-v1a" and | |
| "ethernet-phy-ieee802.3-c45" | |
| - reg: Address and length of the register sets for the device | |
| - SerDes Rx/Tx registers | |
| - SerDes integration registers (1/2) | |
| - SerDes integration registers (2/2) | |
| Example: | |
| xgbe_phy@e1240800 { | |
| compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45"; | |
| reg = <0 0xe1240800 0 0x00400>, | |
| <0 0xe1250000 0 0x00060>, | |
| <0 0xe1250080 0 0x00004>; | |
| }; |