| /****************************************************************************** |
| * |
| * Module Name: dswload - Dispatcher namespace load callbacks |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2005, R. Byron Moore |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <acpi/acpi.h> |
| #include <acpi/acparser.h> |
| #include <acpi/amlcode.h> |
| #include <acpi/acdispat.h> |
| #include <acpi/acinterp.h> |
| #include <acpi/acnamesp.h> |
| #include <acpi/acevents.h> |
| |
| #ifdef ACPI_ASL_COMPILER |
| #include <acpi/acdisasm.h> |
| #endif |
| |
| #define _COMPONENT ACPI_DISPATCHER |
| ACPI_MODULE_NAME("dswload") |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ds_init_callbacks |
| * |
| * PARAMETERS: walk_state - Current state of the parse tree walk |
| * pass_number - 1, 2, or 3 |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Init walk state callbacks |
| * |
| ******************************************************************************/ |
| acpi_status |
| acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number) |
| { |
| |
| switch (pass_number) { |
| case 1: |
| walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 | |
| ACPI_PARSE_DELETE_TREE; |
| walk_state->descending_callback = acpi_ds_load1_begin_op; |
| walk_state->ascending_callback = acpi_ds_load1_end_op; |
| break; |
| |
| case 2: |
| walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 | |
| ACPI_PARSE_DELETE_TREE; |
| walk_state->descending_callback = acpi_ds_load2_begin_op; |
| walk_state->ascending_callback = acpi_ds_load2_end_op; |
| break; |
| |
| case 3: |
| #ifndef ACPI_NO_METHOD_EXECUTION |
| walk_state->parse_flags |= ACPI_PARSE_EXECUTE | |
| ACPI_PARSE_DELETE_TREE; |
| walk_state->descending_callback = acpi_ds_exec_begin_op; |
| walk_state->ascending_callback = acpi_ds_exec_end_op; |
| #endif |
| break; |
| |
| default: |
| return (AE_BAD_PARAMETER); |
| } |
| |
| return (AE_OK); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ds_load1_begin_op |
| * |
| * PARAMETERS: walk_state - Current state of the parse tree walk |
| * out_op - Where to return op if a new one is created |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Descending callback used during the loading of ACPI tables. |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state, |
| union acpi_parse_object ** out_op) |
| { |
| union acpi_parse_object *op; |
| struct acpi_namespace_node *node; |
| acpi_status status; |
| acpi_object_type object_type; |
| char *path; |
| u32 flags; |
| |
| ACPI_FUNCTION_NAME("ds_load1_begin_op"); |
| |
| op = walk_state->op; |
| ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, |
| walk_state)); |
| |
| /* We are only interested in opcodes that have an associated name */ |
| |
| if (op) { |
| if (!(walk_state->op_info->flags & AML_NAMED)) { |
| *out_op = op; |
| return (AE_OK); |
| } |
| |
| /* Check if this object has already been installed in the namespace */ |
| |
| if (op->common.node) { |
| *out_op = op; |
| return (AE_OK); |
| } |
| } |
| |
| path = acpi_ps_get_next_namestring(&walk_state->parser_state); |
| |
| /* Map the raw opcode into an internal object type */ |
| |
| object_type = walk_state->op_info->object_type; |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, |
| "State=%p Op=%p [%s]\n", walk_state, op, |
| acpi_ut_get_type_name(object_type))); |
| |
| switch (walk_state->opcode) { |
| case AML_SCOPE_OP: |
| |
| /* |
| * The target name of the Scope() operator must exist at this point so |
| * that we can actually open the scope to enter new names underneath it. |
| * Allow search-to-root for single namesegs. |
| */ |
| status = |
| acpi_ns_lookup(walk_state->scope_info, path, object_type, |
| ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, |
| walk_state, &(node)); |
| #ifdef ACPI_ASL_COMPILER |
| if (status == AE_NOT_FOUND) { |
| /* |
| * Table disassembly: |
| * Target of Scope() not found. Generate an External for it, and |
| * insert the name into the namespace. |
| */ |
| acpi_dm_add_to_external_list(path); |
| status = |
| acpi_ns_lookup(walk_state->scope_info, path, |
| object_type, ACPI_IMODE_LOAD_PASS1, |
| ACPI_NS_SEARCH_PARENT, walk_state, |
| &(node)); |
| } |
| #endif |
| if (ACPI_FAILURE(status)) { |
| ACPI_REPORT_NSERROR(path, status); |
| return (status); |
| } |
| |
| /* |
| * Check to make sure that the target is |
| * one of the opcodes that actually opens a scope |
| */ |
| switch (node->type) { |
| case ACPI_TYPE_LOCAL_SCOPE: /* Scope */ |
| case ACPI_TYPE_DEVICE: |
| case ACPI_TYPE_POWER: |
| case ACPI_TYPE_PROCESSOR: |
| case ACPI_TYPE_THERMAL: |
| |
| /* These are acceptable types */ |
| break; |
| |
| case ACPI_TYPE_INTEGER: |
| case ACPI_TYPE_STRING: |
| case ACPI_TYPE_BUFFER: |
| |
| /* |
| * These types we will allow, but we will change the type. This |
| * enables some existing code of the form: |
| * |
| * Name (DEB, 0) |
| * Scope (DEB) { ... } |
| * |
| * Note: silently change the type here. On the second pass, we will report |
| * a warning |
| */ |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Type override - [%4.4s] had invalid type (%s) for Scope operator, changed to (Scope)\n", |
| path, |
| acpi_ut_get_type_name(node->type))); |
| |
| node->type = ACPI_TYPE_ANY; |
| walk_state->scope_info->common.value = ACPI_TYPE_ANY; |
| break; |
| |
| default: |
| |
| /* All other types are an error */ |
| |
| ACPI_REPORT_ERROR(("Invalid type (%s) for target of Scope operator [%4.4s] (Cannot override)\n", acpi_ut_get_type_name(node->type), path)); |
| |
| return (AE_AML_OPERAND_TYPE); |
| } |
| break; |
| |
| default: |
| |
| /* |
| * For all other named opcodes, we will enter the name into |
| * the namespace. |
| * |
| * Setup the search flags. |
| * Since we are entering a name into the namespace, we do not want to |
| * enable the search-to-root upsearch. |
| * |
| * There are only two conditions where it is acceptable that the name |
| * already exists: |
| * 1) the Scope() operator can reopen a scoping object that was |
| * previously defined (Scope, Method, Device, etc.) |
| * 2) Whenever we are parsing a deferred opcode (op_region, Buffer, |
| * buffer_field, or Package), the name of the object is already |
| * in the namespace. |
| */ |
| if (walk_state->deferred_node) { |
| /* This name is already in the namespace, get the node */ |
| |
| node = walk_state->deferred_node; |
| status = AE_OK; |
| break; |
| } |
| |
| flags = ACPI_NS_NO_UPSEARCH; |
| if ((walk_state->opcode != AML_SCOPE_OP) && |
| (!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) { |
| flags |= ACPI_NS_ERROR_IF_FOUND; |
| ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, |
| "[%s] Cannot already exist\n", |
| acpi_ut_get_type_name(object_type))); |
| } else { |
| ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, |
| "[%s] Both Find or Create allowed\n", |
| acpi_ut_get_type_name(object_type))); |
| } |
| |
| /* |
| * Enter the named type into the internal namespace. We enter the name |
| * as we go downward in the parse tree. Any necessary subobjects that |
| * involve arguments to the opcode must be created as we go back up the |
| * parse tree later. |
| */ |
| status = |
| acpi_ns_lookup(walk_state->scope_info, path, object_type, |
| ACPI_IMODE_LOAD_PASS1, flags, walk_state, |
| &(node)); |
| if (ACPI_FAILURE(status)) { |
| ACPI_REPORT_NSERROR(path, status); |
| return (status); |
| } |
| break; |
| } |
| |
| /* Common exit */ |
| |
| if (!op) { |
| /* Create a new op */ |
| |
| op = acpi_ps_alloc_op(walk_state->opcode); |
| if (!op) { |
| return (AE_NO_MEMORY); |
| } |
| } |
| |
| /* Initialize */ |
| |
| op->named.name = node->name.integer; |
| |
| #if (defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY)) |
| op->named.path = (u8 *) path; |
| #endif |
| |
| /* |
| * Put the Node in the "op" object that the parser uses, so we |
| * can get it again quickly when this scope is closed |
| */ |
| op->common.node = node; |
| acpi_ps_append_arg(acpi_ps_get_parent_scope(&walk_state->parser_state), |
| op); |
| |
| *out_op = op; |
| return (status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ds_load1_end_op |
| * |
| * PARAMETERS: walk_state - Current state of the parse tree walk |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Ascending callback used during the loading of the namespace, |
| * both control methods and everything else. |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_ds_load1_end_op(struct acpi_walk_state * walk_state) |
| { |
| union acpi_parse_object *op; |
| acpi_object_type object_type; |
| acpi_status status = AE_OK; |
| |
| ACPI_FUNCTION_NAME("ds_load1_end_op"); |
| |
| op = walk_state->op; |
| ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, |
| walk_state)); |
| |
| /* We are only interested in opcodes that have an associated name */ |
| |
| if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) { |
| return (AE_OK); |
| } |
| |
| /* Get the object type to determine if we should pop the scope */ |
| |
| object_type = walk_state->op_info->object_type; |
| |
| #ifndef ACPI_NO_METHOD_EXECUTION |
| if (walk_state->op_info->flags & AML_FIELD) { |
| if (walk_state->opcode == AML_FIELD_OP || |
| walk_state->opcode == AML_BANK_FIELD_OP || |
| walk_state->opcode == AML_INDEX_FIELD_OP) { |
| status = acpi_ds_init_field_objects(op, walk_state); |
| } |
| return (status); |
| } |
| |
| if (op->common.aml_opcode == AML_REGION_OP) { |
| status = acpi_ex_create_region(op->named.data, op->named.length, |
| (acpi_adr_space_type) |
| ((op->common.value.arg)->common. |
| value.integer), walk_state); |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| } |
| #endif |
| |
| if (op->common.aml_opcode == AML_NAME_OP) { |
| /* For Name opcode, get the object type from the argument */ |
| |
| if (op->common.value.arg) { |
| object_type = (acpi_ps_get_opcode_info((op->common. |
| value.arg)-> |
| common. |
| aml_opcode))-> |
| object_type; |
| op->common.node->type = (u8) object_type; |
| } |
| } |
| |
| if (op->common.aml_opcode == AML_METHOD_OP) { |
| /* |
| * method_op pkg_length name_string method_flags term_list |
| * |
| * Note: We must create the method node/object pair as soon as we |
| * see the method declaration. This allows later pass1 parsing |
| * of invocations of the method (need to know the number of |
| * arguments.) |
| */ |
| ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, |
| "LOADING-Method: State=%p Op=%p named_obj=%p\n", |
| walk_state, op, op->named.node)); |
| |
| if (!acpi_ns_get_attached_object(op->named.node)) { |
| walk_state->operands[0] = (void *)op->named.node; |
| walk_state->num_operands = 1; |
| |
| status = |
| acpi_ds_create_operands(walk_state, |
| op->common.value.arg); |
| if (ACPI_SUCCESS(status)) { |
| status = acpi_ex_create_method(op->named.data, |
| op->named.length, |
| walk_state); |
| } |
| walk_state->operands[0] = NULL; |
| walk_state->num_operands = 0; |
| |
| if (ACPI_FAILURE(status)) { |
| return (status); |
| } |
| } |
| } |
| |
| /* Pop the scope stack */ |
| |
| if (acpi_ns_opens_scope(object_type)) { |
| ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, |
| "(%s): Popping scope for Op %p\n", |
| acpi_ut_get_type_name(object_type), op)); |
| |
| status = acpi_ds_scope_stack_pop(walk_state); |
| } |
| |
| return (status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ds_load2_begin_op |
| * |
| * PARAMETERS: walk_state - Current state of the parse tree walk |
| * out_op - Wher to return op if a new one is created |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Descending callback used during the loading of ACPI tables. |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_ds_load2_begin_op(struct acpi_walk_state * walk_state, |
| union acpi_parse_object ** out_op) |
| { |
| union acpi_parse_object *op; |
| struct acpi_namespace_node *node; |
| acpi_status status; |
| acpi_object_type object_type; |
| char *buffer_ptr; |
| |
| ACPI_FUNCTION_TRACE("ds_load2_begin_op"); |
| |
| op = walk_state->op; |
| ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, |
| walk_state)); |
| |
| if (op) { |
| if ((walk_state->control_state) && |
| (walk_state->control_state->common.state == |
| ACPI_CONTROL_CONDITIONAL_EXECUTING)) { |
| /* We are executing a while loop outside of a method */ |
| |
| status = acpi_ds_exec_begin_op(walk_state, out_op); |
| return_ACPI_STATUS(status); |
| } |
| |
| /* We only care about Namespace opcodes here */ |
| |
| if ((!(walk_state->op_info->flags & AML_NSOPCODE) && |
| (walk_state->opcode != AML_INT_NAMEPATH_OP)) || |
| (!(walk_state->op_info->flags & AML_NAMED))) { |
| if ((walk_state->op_info->class == AML_CLASS_EXECUTE) || |
| (walk_state->op_info->class == AML_CLASS_CONTROL)) { |
| ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, |
| "Begin/EXEC: %s (fl %8.8X)\n", |
| walk_state->op_info->name, |
| walk_state->op_info->flags)); |
| |
| /* Executing a type1 or type2 opcode outside of a method */ |
| |
| status = |
| acpi_ds_exec_begin_op(walk_state, out_op); |
| return_ACPI_STATUS(status); |
| } |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| /* Get the name we are going to enter or lookup in the namespace */ |
| |
| if (walk_state->opcode == AML_INT_NAMEPATH_OP) { |
| /* For Namepath op, get the path string */ |
| |
| buffer_ptr = op->common.value.string; |
| if (!buffer_ptr) { |
| /* No name, just exit */ |
| |
| return_ACPI_STATUS(AE_OK); |
| } |
| } else { |
| /* Get name from the op */ |
| |
| buffer_ptr = (char *)&op->named.name; |
| } |
| } else { |
| /* Get the namestring from the raw AML */ |
| |
| buffer_ptr = |
| acpi_ps_get_next_namestring(&walk_state->parser_state); |
| } |
| |
| /* Map the opcode into an internal object type */ |
| |
| object_type = walk_state->op_info->object_type; |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, |
| "State=%p Op=%p Type=%X\n", walk_state, op, |
| object_type)); |
| |
| switch (walk_state->opcode) { |
| case AML_FIELD_OP: |
| case AML_BANK_FIELD_OP: |
| case AML_INDEX_FIELD_OP: |
| |
| node = NULL; |
| status = AE_OK; |
| break; |
| |
| case AML_INT_NAMEPATH_OP: |
| |
| /* |
| * The name_path is an object reference to an existing object. |
| * Don't enter the name into the namespace, but look it up |
| * for use later. |
| */ |
| status = |
| acpi_ns_lookup(walk_state->scope_info, buffer_ptr, |
| object_type, ACPI_IMODE_EXECUTE, |
| ACPI_NS_SEARCH_PARENT, walk_state, &(node)); |
| break; |
| |
| case AML_SCOPE_OP: |
| |
| /* |
| * The Path is an object reference to an existing object. |
| * Don't enter the name into the namespace, but look it up |
| * for use later. |
| */ |
| status = |
| acpi_ns_lookup(walk_state->scope_info, buffer_ptr, |
| object_type, ACPI_IMODE_EXECUTE, |
| ACPI_NS_SEARCH_PARENT, walk_state, &(node)); |
| if (ACPI_FAILURE(status)) { |
| #ifdef ACPI_ASL_COMPILER |
| if (status == AE_NOT_FOUND) { |
| status = AE_OK; |
| } else { |
| ACPI_REPORT_NSERROR(buffer_ptr, status); |
| } |
| #else |
| ACPI_REPORT_NSERROR(buffer_ptr, status); |
| #endif |
| return_ACPI_STATUS(status); |
| } |
| /* |
| * We must check to make sure that the target is |
| * one of the opcodes that actually opens a scope |
| */ |
| switch (node->type) { |
| case ACPI_TYPE_LOCAL_SCOPE: /* Scope */ |
| case ACPI_TYPE_DEVICE: |
| case ACPI_TYPE_POWER: |
| case ACPI_TYPE_PROCESSOR: |
| case ACPI_TYPE_THERMAL: |
| |
| /* These are acceptable types */ |
| break; |
| |
| case ACPI_TYPE_INTEGER: |
| case ACPI_TYPE_STRING: |
| case ACPI_TYPE_BUFFER: |
| |
| /* |
| * These types we will allow, but we will change the type. This |
| * enables some existing code of the form: |
| * |
| * Name (DEB, 0) |
| * Scope (DEB) { ... } |
| */ |
| |
| ACPI_REPORT_WARNING(("Type override - [%4.4s] had invalid type (%s) for Scope operator, changed to (Scope)\n", buffer_ptr, acpi_ut_get_type_name(node->type))); |
| |
| node->type = ACPI_TYPE_ANY; |
| walk_state->scope_info->common.value = ACPI_TYPE_ANY; |
| break; |
| |
| default: |
| |
| /* All other types are an error */ |
| |
| ACPI_REPORT_ERROR(("Invalid type (%s) for target of Scope operator [%4.4s]\n", acpi_ut_get_type_name(node->type), buffer_ptr)); |
| |
| return (AE_AML_OPERAND_TYPE); |
| } |
| break; |
| |
| default: |
| |
| /* All other opcodes */ |
| |
| if (op && op->common.node) { |
| /* This op/node was previously entered into the namespace */ |
| |
| node = op->common.node; |
| |
| if (acpi_ns_opens_scope(object_type)) { |
| status = |
| acpi_ds_scope_stack_push(node, object_type, |
| walk_state); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| } |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| /* |
| * Enter the named type into the internal namespace. We enter the name |
| * as we go downward in the parse tree. Any necessary subobjects that |
| * involve arguments to the opcode must be created as we go back up the |
| * parse tree later. |
| * |
| * Note: Name may already exist if we are executing a deferred opcode. |
| */ |
| if (walk_state->deferred_node) { |
| /* This name is already in the namespace, get the node */ |
| |
| node = walk_state->deferred_node; |
| status = AE_OK; |
| break; |
| } |
| |
| /* Add new entry into namespace */ |
| |
| status = |
| acpi_ns_lookup(walk_state->scope_info, buffer_ptr, |
| object_type, ACPI_IMODE_LOAD_PASS2, |
| ACPI_NS_NO_UPSEARCH, walk_state, &(node)); |
| break; |
| } |
| |
| if (ACPI_FAILURE(status)) { |
| ACPI_REPORT_NSERROR(buffer_ptr, status); |
| return_ACPI_STATUS(status); |
| } |
| |
| if (!op) { |
| /* Create a new op */ |
| |
| op = acpi_ps_alloc_op(walk_state->opcode); |
| if (!op) { |
| return_ACPI_STATUS(AE_NO_MEMORY); |
| } |
| |
| /* Initialize the new op */ |
| |
| if (node) { |
| op->named.name = node->name.integer; |
| } |
| *out_op = op; |
| } |
| |
| /* |
| * Put the Node in the "op" object that the parser uses, so we |
| * can get it again quickly when this scope is closed |
| */ |
| op->common.node = node; |
| |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ds_load2_end_op |
| * |
| * PARAMETERS: walk_state - Current state of the parse tree walk |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Ascending callback used during the loading of the namespace, |
| * both control methods and everything else. |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state) |
| { |
| union acpi_parse_object *op; |
| acpi_status status = AE_OK; |
| acpi_object_type object_type; |
| struct acpi_namespace_node *node; |
| union acpi_parse_object *arg; |
| struct acpi_namespace_node *new_node; |
| #ifndef ACPI_NO_METHOD_EXECUTION |
| u32 i; |
| #endif |
| |
| ACPI_FUNCTION_TRACE("ds_load2_end_op"); |
| |
| op = walk_state->op; |
| ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Opcode [%s] Op %p State %p\n", |
| walk_state->op_info->name, op, walk_state)); |
| |
| /* Check if opcode had an associated namespace object */ |
| |
| if (!(walk_state->op_info->flags & AML_NSOBJECT)) { |
| #ifndef ACPI_NO_METHOD_EXECUTION |
| /* No namespace object. Executable opcode? */ |
| |
| if ((walk_state->op_info->class == AML_CLASS_EXECUTE) || |
| (walk_state->op_info->class == AML_CLASS_CONTROL)) { |
| ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, |
| "End/EXEC: %s (fl %8.8X)\n", |
| walk_state->op_info->name, |
| walk_state->op_info->flags)); |
| |
| /* Executing a type1 or type2 opcode outside of a method */ |
| |
| status = acpi_ds_exec_end_op(walk_state); |
| return_ACPI_STATUS(status); |
| } |
| #endif |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| if (op->common.aml_opcode == AML_SCOPE_OP) { |
| ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, |
| "Ending scope Op=%p State=%p\n", op, |
| walk_state)); |
| } |
| |
| object_type = walk_state->op_info->object_type; |
| |
| /* |
| * Get the Node/name from the earlier lookup |
| * (It was saved in the *op structure) |
| */ |
| node = op->common.node; |
| |
| /* |
| * Put the Node on the object stack (Contains the ACPI Name of |
| * this object) |
| */ |
| walk_state->operands[0] = (void *)node; |
| walk_state->num_operands = 1; |
| |
| /* Pop the scope stack */ |
| |
| if (acpi_ns_opens_scope(object_type) && |
| (op->common.aml_opcode != AML_INT_METHODCALL_OP)) { |
| ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, |
| "(%s) Popping scope for Op %p\n", |
| acpi_ut_get_type_name(object_type), op)); |
| |
| status = acpi_ds_scope_stack_pop(walk_state); |
| if (ACPI_FAILURE(status)) { |
| goto cleanup; |
| } |
| } |
| |
| /* |
| * Named operations are as follows: |
| * |
| * AML_ALIAS |
| * AML_BANKFIELD |
| * AML_CREATEBITFIELD |
| * AML_CREATEBYTEFIELD |
| * AML_CREATEDWORDFIELD |
| * AML_CREATEFIELD |
| * AML_CREATEQWORDFIELD |
| * AML_CREATEWORDFIELD |
| * AML_DATA_REGION |
| * AML_DEVICE |
| * AML_EVENT |
| * AML_FIELD |
| * AML_INDEXFIELD |
| * AML_METHOD |
| * AML_METHODCALL |
| * AML_MUTEX |
| * AML_NAME |
| * AML_NAMEDFIELD |
| * AML_OPREGION |
| * AML_POWERRES |
| * AML_PROCESSOR |
| * AML_SCOPE |
| * AML_THERMALZONE |
| */ |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, |
| "Create-Load [%s] State=%p Op=%p named_obj=%p\n", |
| acpi_ps_get_opcode_name(op->common.aml_opcode), |
| walk_state, op, node)); |
| |
| /* Decode the opcode */ |
| |
| arg = op->common.value.arg; |
| |
| switch (walk_state->op_info->type) { |
| #ifndef ACPI_NO_METHOD_EXECUTION |
| |
| case AML_TYPE_CREATE_FIELD: |
| |
| /* |
| * Create the field object, but the field buffer and index must |
| * be evaluated later during the execution phase |
| */ |
| status = acpi_ds_create_buffer_field(op, walk_state); |
| break; |
| |
| case AML_TYPE_NAMED_FIELD: |
| |
| switch (op->common.aml_opcode) { |
| case AML_INDEX_FIELD_OP: |
| |
| status = |
| acpi_ds_create_index_field(op, |
| (acpi_handle) arg-> |
| common.node, walk_state); |
| break; |
| |
| case AML_BANK_FIELD_OP: |
| |
| status = |
| acpi_ds_create_bank_field(op, arg->common.node, |
| walk_state); |
| break; |
| |
| case AML_FIELD_OP: |
| |
| status = |
| acpi_ds_create_field(op, arg->common.node, |
| walk_state); |
| break; |
| |
| default: |
| /* All NAMED_FIELD opcodes must be handled above */ |
| break; |
| } |
| break; |
| |
| case AML_TYPE_NAMED_SIMPLE: |
| |
| status = acpi_ds_create_operands(walk_state, arg); |
| if (ACPI_FAILURE(status)) { |
| goto cleanup; |
| } |
| |
| switch (op->common.aml_opcode) { |
| case AML_PROCESSOR_OP: |
| |
| status = acpi_ex_create_processor(walk_state); |
| break; |
| |
| case AML_POWER_RES_OP: |
| |
| status = acpi_ex_create_power_resource(walk_state); |
| break; |
| |
| case AML_MUTEX_OP: |
| |
| status = acpi_ex_create_mutex(walk_state); |
| break; |
| |
| case AML_EVENT_OP: |
| |
| status = acpi_ex_create_event(walk_state); |
| break; |
| |
| case AML_DATA_REGION_OP: |
| |
| status = acpi_ex_create_table_region(walk_state); |
| break; |
| |
| case AML_ALIAS_OP: |
| |
| status = acpi_ex_create_alias(walk_state); |
| break; |
| |
| default: |
| /* Unknown opcode */ |
| |
| status = AE_OK; |
| goto cleanup; |
| } |
| |
| /* Delete operands */ |
| |
| for (i = 1; i < walk_state->num_operands; i++) { |
| acpi_ut_remove_reference(walk_state->operands[i]); |
| walk_state->operands[i] = NULL; |
| } |
| |
| break; |
| #endif /* ACPI_NO_METHOD_EXECUTION */ |
| |
| case AML_TYPE_NAMED_COMPLEX: |
| |
| switch (op->common.aml_opcode) { |
| #ifndef ACPI_NO_METHOD_EXECUTION |
| case AML_REGION_OP: |
| /* |
| * The op_region is not fully parsed at this time. Only valid |
| * argument is the space_id. (We must save the address of the |
| * AML of the address and length operands) |
| */ |
| /* |
| * If we have a valid region, initialize it |
| * Namespace is NOT locked at this point. |
| */ |
| status = |
| acpi_ev_initialize_region |
| (acpi_ns_get_attached_object(node), FALSE); |
| if (ACPI_FAILURE(status)) { |
| /* |
| * If AE_NOT_EXIST is returned, it is not fatal |
| * because many regions get created before a handler |
| * is installed for said region. |
| */ |
| if (AE_NOT_EXIST == status) { |
| status = AE_OK; |
| } |
| } |
| break; |
| |
| case AML_NAME_OP: |
| |
| status = acpi_ds_create_node(walk_state, node, op); |
| break; |
| #endif /* ACPI_NO_METHOD_EXECUTION */ |
| |
| default: |
| /* All NAMED_COMPLEX opcodes must be handled above */ |
| /* Note: Method objects were already created in Pass 1 */ |
| break; |
| } |
| break; |
| |
| case AML_CLASS_INTERNAL: |
| |
| /* case AML_INT_NAMEPATH_OP: */ |
| break; |
| |
| case AML_CLASS_METHOD_CALL: |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, |
| "RESOLVING-method_call: State=%p Op=%p named_obj=%p\n", |
| walk_state, op, node)); |
| |
| /* |
| * Lookup the method name and save the Node |
| */ |
| status = |
| acpi_ns_lookup(walk_state->scope_info, |
| arg->common.value.string, ACPI_TYPE_ANY, |
| ACPI_IMODE_LOAD_PASS2, |
| ACPI_NS_SEARCH_PARENT | |
| ACPI_NS_DONT_OPEN_SCOPE, walk_state, |
| &(new_node)); |
| if (ACPI_SUCCESS(status)) { |
| |
| /* |
| * Make sure that what we found is indeed a method |
| * We didn't search for a method on purpose, to see if the name |
| * would resolve |
| */ |
| if (new_node->type != ACPI_TYPE_METHOD) { |
| status = AE_AML_OPERAND_TYPE; |
| } |
| |
| /* We could put the returned object (Node) on the object stack for |
| * later, but for now, we will put it in the "op" object that the |
| * parser uses, so we can get it again at the end of this scope |
| */ |
| op->common.node = new_node; |
| } else { |
| ACPI_REPORT_NSERROR(arg->common.value.string, status); |
| } |
| break; |
| |
| default: |
| break; |
| } |
| |
| cleanup: |
| |
| /* Remove the Node pushed at the very beginning */ |
| |
| walk_state->operands[0] = NULL; |
| walk_state->num_operands = 0; |
| return_ACPI_STATUS(status); |
| } |