| |
| What: /sys/class/net/<mesh_iface>/mesh/aggregated_ogms |
| Date: May 2010 |
| Contact: Marek Lindner <lindner_marek@yahoo.de> |
| Description: |
| Indicates whether the batman protocol messages of the |
| mesh <mesh_iface> shall be aggregated or not. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/bonding |
| Date: June 2010 |
| Contact: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> |
| Description: |
| Indicates whether the data traffic going through the |
| mesh will be sent using multiple interfaces at the |
| same time (if available). |
| |
| What: /sys/class/net/<mesh_iface>/mesh/fragmentation |
| Date: October 2010 |
| Contact: Andreas Langer <an.langer@gmx.de> |
| Description: |
| Indicates whether the data traffic going through the |
| mesh will be fragmented or silently discarded if the |
| packet size exceeds the outgoing interface MTU. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/ap_isolation |
| Date: May 2011 |
| Contact: Antonio Quartulli <ordex@autistici.org> |
| Description: |
| Indicates whether the data traffic going from a |
| wireless client to another wireless client will be |
| silently dropped. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/gw_bandwidth |
| Date: October 2010 |
| Contact: Marek Lindner <lindner_marek@yahoo.de> |
| Description: |
| Defines the bandwidth which is propagated by this |
| node if gw_mode was set to 'server'. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/gw_mode |
| Date: October 2010 |
| Contact: Marek Lindner <lindner_marek@yahoo.de> |
| Description: |
| Defines the state of the gateway features. Can be |
| either 'off', 'client' or 'server'. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/gw_sel_class |
| Date: October 2010 |
| Contact: Marek Lindner <lindner_marek@yahoo.de> |
| Description: |
| Defines the selection criteria this node will use |
| to choose a gateway if gw_mode was set to 'client'. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/orig_interval |
| Date: May 2010 |
| Contact: Marek Lindner <lindner_marek@yahoo.de> |
| Description: |
| Defines the interval in milliseconds in which batman |
| sends its protocol messages. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/hop_penalty |
| Date: Oct 2010 |
| Contact: Linus LΓΌssing <linus.luessing@web.de> |
| Description: |
| Defines the penalty which will be applied to an |
| originator message's tq-field on every hop. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/routing_algo |
| Date: Dec 2011 |
| Contact: Marek Lindner <lindner_marek@yahoo.de> |
| Description: |
| Defines the routing procotol this mesh instance |
| uses to find the optimal paths through the mesh. |
| |
| What: /sys/class/net/<mesh_iface>/mesh/vis_mode |
| Date: May 2010 |
| Contact: Marek Lindner <lindner_marek@yahoo.de> |
| Description: |
| Each batman node only maintains information about its |
| own local neighborhood, therefore generating graphs |
| showing the topology of the entire mesh is not easily |
| feasible without having a central instance to collect |
| the local topologies from all nodes. This file allows |
| to activate the collecting (server) mode. |
