| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com) |
| * |
| * Reset/NMI/re-entry vectors for BMIPS processors |
| */ |
| |
| #include <linux/init.h> |
| |
| #include <asm/asm.h> |
| #include <asm/asmmacro.h> |
| #include <asm/cacheops.h> |
| #include <asm/regdef.h> |
| #include <asm/mipsregs.h> |
| #include <asm/stackframe.h> |
| #include <asm/addrspace.h> |
| #include <asm/hazards.h> |
| #include <asm/bmips.h> |
| |
| .macro BARRIER |
| .set mips32 |
| _ssnop |
| _ssnop |
| _ssnop |
| .set mips0 |
| .endm |
| |
| /*********************************************************************** |
| * Alternate CPU1 startup vector for BMIPS4350 |
| * |
| * On some systems the bootloader has already started CPU1 and configured |
| * it to resume execution at 0x8000_0200 (!BEV IV vector) when it is |
| * triggered by the SW1 interrupt. If that is the case we try to move |
| * it to a more convenient place: BMIPS_WARM_RESTART_VEC @ 0x8000_0380. |
| ***********************************************************************/ |
| |
| LEAF(bmips_smp_movevec) |
| la k0, 1f |
| li k1, CKSEG1 |
| or k0, k1 |
| jr k0 |
| |
| 1: |
| /* clear IV, pending IPIs */ |
| mtc0 zero, CP0_CAUSE |
| |
| /* re-enable IRQs to wait for SW1 */ |
| li k0, ST0_IE | ST0_BEV | STATUSF_IP1 |
| mtc0 k0, CP0_STATUS |
| |
| /* set up CPU1 CBR; move BASE to 0xa000_0000 */ |
| li k0, 0xff400000 |
| mtc0 k0, $22, 6 |
| /* set up relocation vector address based on thread ID */ |
| mfc0 k1, $22, 3 |
| srl k1, 16 |
| andi k1, 0x8000 |
| or k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_0 |
| or k0, k1 |
| li k1, 0xa0080000 |
| sw k1, 0(k0) |
| |
| /* wait here for SW1 interrupt from bmips_boot_secondary() */ |
| wait |
| |
| la k0, bmips_reset_nmi_vec |
| li k1, CKSEG1 |
| or k0, k1 |
| jr k0 |
| END(bmips_smp_movevec) |
| |
| /*********************************************************************** |
| * Reset/NMI vector |
| * For BMIPS processors that can relocate their exception vectors, this |
| * entire function gets copied to 0x8000_0000. |
| ***********************************************************************/ |
| |
| NESTED(bmips_reset_nmi_vec, PT_SIZE, sp) |
| .set push |
| .set noat |
| .align 4 |
| |
| #ifdef CONFIG_SMP |
| /* if the NMI bit is clear, assume this is a CPU1 reset instead */ |
| li k1, (1 << 19) |
| mfc0 k0, CP0_STATUS |
| and k0, k1 |
| beqz k0, bmips_smp_entry |
| |
| #if defined(CONFIG_CPU_BMIPS5000) |
| /* if we're not on core 0, this must be the SMP boot signal */ |
| li k1, (3 << 25) |
| mfc0 k0, $22 |
| and k0, k1 |
| bnez k0, bmips_smp_entry |
| #endif |
| #endif /* CONFIG_SMP */ |
| |
| /* nope, it's just a regular NMI */ |
| SAVE_ALL |
| move a0, sp |
| |
| /* clear EXL, ERL, BEV so that TLB refills still work */ |
| mfc0 k0, CP0_STATUS |
| li k1, ST0_ERL | ST0_EXL | ST0_BEV | ST0_IE |
| or k0, k1 |
| xor k0, k1 |
| mtc0 k0, CP0_STATUS |
| BARRIER |
| |
| /* jump to the NMI handler function */ |
| la k0, nmi_handler |
| jr k0 |
| |
| RESTORE_ALL |
| .set mips3 |
| eret |
| |
| /*********************************************************************** |
| * CPU1 reset vector (used for the initial boot only) |
| * This is still part of bmips_reset_nmi_vec(). |
| ***********************************************************************/ |
| |
| #ifdef CONFIG_SMP |
| |
| bmips_smp_entry: |
| |
| /* set up CP0 STATUS; enable FPU */ |
| li k0, 0x30000000 |
| mtc0 k0, CP0_STATUS |
| BARRIER |
| |
| /* set local CP0 CONFIG to make kseg0 cacheable, write-back */ |
| mfc0 k0, CP0_CONFIG |
| ori k0, 0x07 |
| xori k0, 0x04 |
| mtc0 k0, CP0_CONFIG |
| |
| #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) |
| /* initialize CPU1's local I-cache */ |
| li k0, 0x80000000 |
| li k1, 0x80010000 |
| mtc0 zero, $28 |
| mtc0 zero, $28, 1 |
| BARRIER |
| |
| 1: cache Index_Store_Tag_I, 0(k0) |
| addiu k0, 16 |
| bne k0, k1, 1b |
| #elif defined(CONFIG_CPU_BMIPS5000) |
| /* set exception vector base */ |
| la k0, ebase |
| lw k0, 0(k0) |
| mtc0 k0, $15, 1 |
| BARRIER |
| #endif |
| |
| /* jump back to kseg0 in case we need to remap the kseg1 area */ |
| la k0, 1f |
| jr k0 |
| 1: |
| la k0, bmips_enable_xks01 |
| jalr k0 |
| |
| /* use temporary stack to set up upper memory TLB */ |
| li sp, BMIPS_WARM_RESTART_VEC |
| la k0, plat_wired_tlb_setup |
| jalr k0 |
| |
| /* switch to permanent stack and continue booting */ |
| |
| .global bmips_secondary_reentry |
| bmips_secondary_reentry: |
| la k0, bmips_smp_boot_sp |
| lw sp, 0(k0) |
| la k0, bmips_smp_boot_gp |
| lw gp, 0(k0) |
| la k0, start_secondary |
| jr k0 |
| |
| #endif /* CONFIG_SMP */ |
| |
| .align 4 |
| .global bmips_reset_nmi_vec_end |
| bmips_reset_nmi_vec_end: |
| |
| END(bmips_reset_nmi_vec) |
| |
| .set pop |
| .previous |
| |
| /*********************************************************************** |
| * CPU1 warm restart vector (used for second and subsequent boots). |
| * Also used for S2 standby recovery (PM). |
| * This entire function gets copied to (BMIPS_WARM_RESTART_VEC) |
| ***********************************************************************/ |
| |
| LEAF(bmips_smp_int_vec) |
| |
| .align 4 |
| mfc0 k0, CP0_STATUS |
| ori k0, 0x01 |
| xori k0, 0x01 |
| mtc0 k0, CP0_STATUS |
| eret |
| |
| .align 4 |
| .global bmips_smp_int_vec_end |
| bmips_smp_int_vec_end: |
| |
| END(bmips_smp_int_vec) |
| |
| /*********************************************************************** |
| * XKS01 support |
| * Certain CPUs support extending kseg0 to 1024MB. |
| ***********************************************************************/ |
| |
| LEAF(bmips_enable_xks01) |
| |
| #if defined(CONFIG_XKS01) |
| |
| #if defined(CONFIG_CPU_BMIPS4380) |
| mfc0 t0, $22, 3 |
| li t1, 0x1ff0 |
| li t2, (1 << 12) | (1 << 9) |
| or t0, t1 |
| xor t0, t1 |
| or t0, t2 |
| mtc0 t0, $22, 3 |
| BARRIER |
| #elif defined(CONFIG_CPU_BMIPS5000) |
| mfc0 t0, $22, 5 |
| li t1, 0x01ff |
| li t2, (1 << 8) | (1 << 5) |
| or t0, t1 |
| xor t0, t1 |
| or t0, t2 |
| mtc0 t0, $22, 5 |
| BARRIER |
| #else |
| |
| #error Missing XKS01 setup |
| |
| #endif |
| |
| #endif /* defined(CONFIG_XKS01) */ |
| |
| jr ra |
| |
| END(bmips_enable_xks01) |
| |
| .previous |
