drivers/gpu/drm/gma500/psb_device.c - arm/linux - Git at Google

 /**************************************************************************
  * Copyright (c) 2011, Intel Corporation.
  * All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
  *
  * This program is distributed in the hope it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License along with
  * this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  *
  **************************************************************************/

 #include <linux/backlight.h>
 #include <drm/drmP.h>
 #include <drm/drm.h>
 #include <drm/gma_drm.h>
 #include "psb_drv.h"
 #include "psb_reg.h"
 #include "psb_intel_reg.h"
 #include "intel_bios.h"
 #include "psb_device.h"
 #include "gma_device.h"

 static int psb_output_init(struct drm_device *dev)
 {
 	struct drm_psb_private *dev_priv = dev->dev_private;
 	psb_intel_lvds_init(dev, &dev_priv->mode_dev);
 	psb_intel_sdvo_init(dev, SDVOB);
 	return 0;
 }

 #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE

 /*
  *	Poulsbo Backlight Interfaces
  */

 #define BLC_PWM_PRECISION_FACTOR 100	/* 10000000 */
 #define BLC_PWM_FREQ_CALC_CONSTANT 32
 #define MHz 1000000

 #define PSB_BLC_PWM_PRECISION_FACTOR    10
 #define PSB_BLC_MAX_PWM_REG_FREQ        0xFFFE
 #define PSB_BLC_MIN_PWM_REG_FREQ        0x2

 #define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
 #define PSB_BACKLIGHT_PWM_CTL_SHIFT	(16)

 static int psb_brightness;
 static struct backlight_device *psb_backlight_device;

 static int psb_get_brightness(struct backlight_device *bd)
 {
 	/* return locally cached var instead of HW read (due to DPST etc.) */
 	/* FIXME: ideally return actual value in case firmware fiddled with
 	   it */
 	return psb_brightness;
 }


 static int psb_backlight_setup(struct drm_device *dev)
 {
 	struct drm_psb_private *dev_priv = dev->dev_private;
 	unsigned long core_clock;
 	/* u32 bl_max_freq; */
 	/* unsigned long value; */
 	u16 bl_max_freq;
 	uint32_t value;
 	uint32_t blc_pwm_precision_factor;

 	/* get bl_max_freq and pol from dev_priv*/
 	if (!dev_priv->lvds_bl) {
 		dev_err(dev->dev, "Has no valid LVDS backlight info\n");
 		return -ENOENT;
 	}
 	bl_max_freq = dev_priv->lvds_bl->freq;
 	blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR;

 	core_clock = dev_priv->core_freq;

 	value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
 	value *= blc_pwm_precision_factor;
 	value /= bl_max_freq;
 	value /= blc_pwm_precision_factor;

 	if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ ||
 		 value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ)
 				return -ERANGE;
 	else {
 		value &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
 		REG_WRITE(BLC_PWM_CTL,
 			(value << PSB_BACKLIGHT_PWM_CTL_SHIFT) | (value));
 	}
 	return 0;
 }

 static int psb_set_brightness(struct backlight_device *bd)
 {
 	struct drm_device *dev = bl_get_data(psb_backlight_device);
 	int level = bd->props.brightness;

 	/* Percentage 1-100% being valid */
 	if (level < 1)
 		level = 1;

 	psb_intel_lvds_set_brightness(dev, level);
 	psb_brightness = level;
 	return 0;
 }

 static const struct backlight_ops psb_ops = {
 	.get_brightness = psb_get_brightness,
 	.update_status  = psb_set_brightness,
 };

 static int psb_backlight_init(struct drm_device *dev)
 {
 	struct drm_psb_private *dev_priv = dev->dev_private;
 	int ret;
 	struct backlight_properties props;

 	memset(&props, 0, sizeof(struct backlight_properties));
 	props.max_brightness = 100;
 	props.type = BACKLIGHT_PLATFORM;

 	psb_backlight_device = backlight_device_register("psb-bl",
 					NULL, (void *)dev, &psb_ops, &props);
 	if (IS_ERR(psb_backlight_device))
 		return PTR_ERR(psb_backlight_device);

 	ret = psb_backlight_setup(dev);
 	if (ret < 0) {
 		backlight_device_unregister(psb_backlight_device);
 		psb_backlight_device = NULL;
 		return ret;
 	}
 	psb_backlight_device->props.brightness = 100;
 	psb_backlight_device->props.max_brightness = 100;
 	backlight_update_status(psb_backlight_device);
 	dev_priv->backlight_device = psb_backlight_device;

 	/* This must occur after the backlight is properly initialised */
 	psb_lid_timer_init(dev_priv);

 	return 0;
 }

 #endif

 /*
  *	Provide the Poulsbo specific chip logic and low level methods
  *	for power management
  */

 static void psb_init_pm(struct drm_device *dev)
 {
 	struct drm_psb_private *dev_priv = dev->dev_private;

 	u32 gating = PSB_RSGX32(PSB_CR_CLKGATECTL);
 	gating &= ~3;	/* Disable 2D clock gating */
 	gating |= 1;
 	PSB_WSGX32(gating, PSB_CR_CLKGATECTL);
 	PSB_RSGX32(PSB_CR_CLKGATECTL);
 }

 /**
  *	psb_save_display_registers	-	save registers lost on suspend
  *	@dev: our DRM device
  *
  *	Save the state we need in order to be able to restore the interface
  *	upon resume from suspend
  */
 static int psb_save_display_registers(struct drm_device *dev)
 {
 	struct drm_psb_private *dev_priv = dev->dev_private;
 	struct drm_crtc *crtc;
 	struct gma_connector *connector;
 	struct psb_state *regs = &dev_priv->regs.psb;

 	/* Display arbitration control + watermarks */
 	regs->saveDSPARB = PSB_RVDC32(DSPARB);
 	regs->saveDSPFW1 = PSB_RVDC32(DSPFW1);
 	regs->saveDSPFW2 = PSB_RVDC32(DSPFW2);
 	regs->saveDSPFW3 = PSB_RVDC32(DSPFW3);
 	regs->saveDSPFW4 = PSB_RVDC32(DSPFW4);
 	regs->saveDSPFW5 = PSB_RVDC32(DSPFW5);
 	regs->saveDSPFW6 = PSB_RVDC32(DSPFW6);
 	regs->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);

 	/* Save crtc and output state */
 	drm_modeset_lock_all(dev);
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		if (drm_helper_crtc_in_use(crtc))
 			dev_priv->ops->save_crtc(crtc);
 	}

 	list_for_each_entry(connector, &dev->mode_config.connector_list, base.head)
 		if (connector->save)
 			connector->save(&connector->base);

 	drm_modeset_unlock_all(dev);
 	return 0;
 }

 /**
  *	psb_restore_display_registers	-	restore lost register state
  *	@dev: our DRM device
  *
  *	Restore register state that was lost during suspend and resume.
  */
 static int psb_restore_display_registers(struct drm_device *dev)
 {
 	struct drm_psb_private *dev_priv = dev->dev_private;
 	struct drm_crtc *crtc;
 	struct gma_connector *connector;
 	struct psb_state *regs = &dev_priv->regs.psb;

 	/* Display arbitration + watermarks */
 	PSB_WVDC32(regs->saveDSPARB, DSPARB);
 	PSB_WVDC32(regs->saveDSPFW1, DSPFW1);
 	PSB_WVDC32(regs->saveDSPFW2, DSPFW2);
 	PSB_WVDC32(regs->saveDSPFW3, DSPFW3);
 	PSB_WVDC32(regs->saveDSPFW4, DSPFW4);
 	PSB_WVDC32(regs->saveDSPFW5, DSPFW5);
 	PSB_WVDC32(regs->saveDSPFW6, DSPFW6);
 	PSB_WVDC32(regs->saveCHICKENBIT, DSPCHICKENBIT);

 	/*make sure VGA plane is off. it initializes to on after reset!*/
 	PSB_WVDC32(0x80000000, VGACNTRL);

 	drm_modeset_lock_all(dev);
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
 		if (drm_helper_crtc_in_use(crtc))
 			dev_priv->ops->restore_crtc(crtc);

 	list_for_each_entry(connector, &dev->mode_config.connector_list, base.head)
 		if (connector->restore)
 			connector->restore(&connector->base);

 	drm_modeset_unlock_all(dev);
 	return 0;
 }

 static int psb_power_down(struct drm_device *dev)
 {
 	return 0;
 }

 static int psb_power_up(struct drm_device *dev)
 {
 	return 0;
 }

 /* Poulsbo */
 static const struct psb_offset psb_regmap[2] = {
 	{
 		.fp0 = FPA0,
 		.fp1 = FPA1,
 		.cntr = DSPACNTR,
 		.conf = PIPEACONF,
 		.src = PIPEASRC,
 		.dpll = DPLL_A,
 		.htotal = HTOTAL_A,
 		.hblank = HBLANK_A,
 		.hsync = HSYNC_A,
 		.vtotal = VTOTAL_A,
 		.vblank = VBLANK_A,
 		.vsync = VSYNC_A,
 		.stride = DSPASTRIDE,
 		.size = DSPASIZE,
 		.pos = DSPAPOS,
 		.base = DSPABASE,
 		.surf = DSPASURF,
 		.addr = DSPABASE,
 		.status = PIPEASTAT,
 		.linoff = DSPALINOFF,
 		.tileoff = DSPATILEOFF,
 		.palette = PALETTE_A,
 	},
 	{
 		.fp0 = FPB0,
 		.fp1 = FPB1,
 		.cntr = DSPBCNTR,
 		.conf = PIPEBCONF,
 		.src = PIPEBSRC,
 		.dpll = DPLL_B,
 		.htotal = HTOTAL_B,
 		.hblank = HBLANK_B,
 		.hsync = HSYNC_B,
 		.vtotal = VTOTAL_B,
 		.vblank = VBLANK_B,
 		.vsync = VSYNC_B,
 		.stride = DSPBSTRIDE,
 		.size = DSPBSIZE,
 		.pos = DSPBPOS,
 		.base = DSPBBASE,
 		.surf = DSPBSURF,
 		.addr = DSPBBASE,
 		.status = PIPEBSTAT,
 		.linoff = DSPBLINOFF,
 		.tileoff = DSPBTILEOFF,
 		.palette = PALETTE_B,
 	}
 };

 static int psb_chip_setup(struct drm_device *dev)
 {
 	struct drm_psb_private *dev_priv = dev->dev_private;
 	dev_priv->regmap = psb_regmap;
 	gma_get_core_freq(dev);
 	gma_intel_setup_gmbus(dev);
 	psb_intel_opregion_init(dev);
 	psb_intel_init_bios(dev);
 	return 0;
 }

 static void psb_chip_teardown(struct drm_device *dev)
 {
 	struct drm_psb_private *dev_priv = dev->dev_private;
 	psb_lid_timer_takedown(dev_priv);
 	gma_intel_teardown_gmbus(dev);
 }

 const struct psb_ops psb_chip_ops = {
 	.name = "Poulsbo",
 	.accel_2d = 1,
 	.pipes = 2,
 	.crtcs = 2,
 	.hdmi_mask = (1 << 0),
 	.lvds_mask = (1 << 1),
 	.sdvo_mask = (1 << 0),
 	.cursor_needs_phys = 1,
 	.sgx_offset = PSB_SGX_OFFSET,
 	.chip_setup = psb_chip_setup,
 	.chip_teardown = psb_chip_teardown,

 	.crtc_helper = &psb_intel_helper_funcs,
 	.crtc_funcs = &psb_intel_crtc_funcs,
 	.clock_funcs = &psb_clock_funcs,

 	.output_init = psb_output_init,

 #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
 	.backlight_init = psb_backlight_init,
 #endif

 	.init_pm = psb_init_pm,
 	.save_regs = psb_save_display_registers,
 	.restore_regs = psb_restore_display_registers,
 	.save_crtc = gma_crtc_save,
 	.restore_crtc = gma_crtc_restore,
 	.power_down = psb_power_down,
 	.power_up = psb_power_up,
 };
	/**************************************************************************
	* Copyright (c) 2011, Intel Corporation.
	* All Rights Reserved.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms and conditions of the GNU General Public License,
	* version 2, as published by the Free Software Foundation.
	*
	* This program is distributed in the hope it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	* You should have received a copy of the GNU General Public License along with
	* this program; if not, write to the Free Software Foundation, Inc.,
	* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
	*
	**************************************************************************/

	#include <linux/backlight.h>
	#include <drm/drmP.h>
	#include <drm/drm.h>
	#include <drm/gma_drm.h>
	#include "psb_drv.h"
	#include "psb_reg.h"
	#include "psb_intel_reg.h"
	#include "intel_bios.h"
	#include "psb_device.h"
	#include "gma_device.h"

	static int psb_output_init(struct drm_device *dev)
	{
	struct drm_psb_private *dev_priv = dev->dev_private;
	psb_intel_lvds_init(dev, &dev_priv->mode_dev);
	psb_intel_sdvo_init(dev, SDVOB);
	return 0;
	}

	#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE

	/*
	* Poulsbo Backlight Interfaces
	*/

	#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */
	#define BLC_PWM_FREQ_CALC_CONSTANT 32
	#define MHz 1000000

	#define PSB_BLC_PWM_PRECISION_FACTOR 10
	#define PSB_BLC_MAX_PWM_REG_FREQ 0xFFFE
	#define PSB_BLC_MIN_PWM_REG_FREQ 0x2

	#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
	#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16)

	static int psb_brightness;
	static struct backlight_device *psb_backlight_device;

	static int psb_get_brightness(struct backlight_device *bd)
	{
	/* return locally cached var instead of HW read (due to DPST etc.) */
	/* FIXME: ideally return actual value in case firmware fiddled with
	it */
	return psb_brightness;
	}


	static int psb_backlight_setup(struct drm_device *dev)
	{
	struct drm_psb_private *dev_priv = dev->dev_private;
	unsigned long core_clock;
	/* u32 bl_max_freq; */
	/* unsigned long value; */
	u16 bl_max_freq;
	uint32_t value;
	uint32_t blc_pwm_precision_factor;

	/* get bl_max_freq and pol from dev_priv*/
	if (!dev_priv->lvds_bl) {
	dev_err(dev->dev, "Has no valid LVDS backlight info\n");
	return -ENOENT;
	}
	bl_max_freq = dev_priv->lvds_bl->freq;
	blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR;

	core_clock = dev_priv->core_freq;

	value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
	value *= blc_pwm_precision_factor;
	value /= bl_max_freq;
	value /= blc_pwm_precision_factor;

	if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ \|\|
	value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ)
	return -ERANGE;
	else {
	value &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
	REG_WRITE(BLC_PWM_CTL,
	(value << PSB_BACKLIGHT_PWM_CTL_SHIFT) \| (value));
	}
	return 0;
	}

	static int psb_set_brightness(struct backlight_device *bd)
	{
	struct drm_device *dev = bl_get_data(psb_backlight_device);
	int level = bd->props.brightness;

	/* Percentage 1-100% being valid */
	if (level < 1)
	level = 1;

	psb_intel_lvds_set_brightness(dev, level);
	psb_brightness = level;
	return 0;
	}

	static const struct backlight_ops psb_ops = {
	.get_brightness = psb_get_brightness,
	.update_status = psb_set_brightness,
	};

	static int psb_backlight_init(struct drm_device *dev)
	{
	struct drm_psb_private *dev_priv = dev->dev_private;
	int ret;
	struct backlight_properties props;

	memset(&props, 0, sizeof(struct backlight_properties));
	props.max_brightness = 100;
	props.type = BACKLIGHT_PLATFORM;

	psb_backlight_device = backlight_device_register("psb-bl",
	NULL, (void *)dev, &psb_ops, &props);
	if (IS_ERR(psb_backlight_device))
	return PTR_ERR(psb_backlight_device);

	ret = psb_backlight_setup(dev);
	if (ret < 0) {
	backlight_device_unregister(psb_backlight_device);
	psb_backlight_device = NULL;
	return ret;
	}
	psb_backlight_device->props.brightness = 100;
	psb_backlight_device->props.max_brightness = 100;
	backlight_update_status(psb_backlight_device);
	dev_priv->backlight_device = psb_backlight_device;

	/* This must occur after the backlight is properly initialised */
	psb_lid_timer_init(dev_priv);

	return 0;
	}

	#endif

	/*
	* Provide the Poulsbo specific chip logic and low level methods
	* for power management
	*/

	static void psb_init_pm(struct drm_device *dev)
	{
	struct drm_psb_private *dev_priv = dev->dev_private;

	u32 gating = PSB_RSGX32(PSB_CR_CLKGATECTL);
	gating &= ~3; /* Disable 2D clock gating */
	gating \|= 1;
	PSB_WSGX32(gating, PSB_CR_CLKGATECTL);
	PSB_RSGX32(PSB_CR_CLKGATECTL);
	}

	/**
	* psb_save_display_registers - save registers lost on suspend
	* @dev: our DRM device
	*
	* Save the state we need in order to be able to restore the interface
	* upon resume from suspend
	*/
	static int psb_save_display_registers(struct drm_device *dev)
	{
	struct drm_psb_private *dev_priv = dev->dev_private;
	struct drm_crtc *crtc;
	struct gma_connector *connector;
	struct psb_state *regs = &dev_priv->regs.psb;

	/* Display arbitration control + watermarks */
	regs->saveDSPARB = PSB_RVDC32(DSPARB);
	regs->saveDSPFW1 = PSB_RVDC32(DSPFW1);
	regs->saveDSPFW2 = PSB_RVDC32(DSPFW2);
	regs->saveDSPFW3 = PSB_RVDC32(DSPFW3);
	regs->saveDSPFW4 = PSB_RVDC32(DSPFW4);
	regs->saveDSPFW5 = PSB_RVDC32(DSPFW5);
	regs->saveDSPFW6 = PSB_RVDC32(DSPFW6);
	regs->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);

	/* Save crtc and output state */
	drm_modeset_lock_all(dev);
	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
	if (drm_helper_crtc_in_use(crtc))
	dev_priv->ops->save_crtc(crtc);
	}

	list_for_each_entry(connector, &dev->mode_config.connector_list, base.head)
	if (connector->save)
	connector->save(&connector->base);

	drm_modeset_unlock_all(dev);
	return 0;
	}

	/**
	* psb_restore_display_registers - restore lost register state
	* @dev: our DRM device
	*
	* Restore register state that was lost during suspend and resume.
	*/
	static int psb_restore_display_registers(struct drm_device *dev)
	{
	struct drm_psb_private *dev_priv = dev->dev_private;
	struct drm_crtc *crtc;
	struct gma_connector *connector;
	struct psb_state *regs = &dev_priv->regs.psb;

	/* Display arbitration + watermarks */
	PSB_WVDC32(regs->saveDSPARB, DSPARB);
	PSB_WVDC32(regs->saveDSPFW1, DSPFW1);
	PSB_WVDC32(regs->saveDSPFW2, DSPFW2);
	PSB_WVDC32(regs->saveDSPFW3, DSPFW3);
	PSB_WVDC32(regs->saveDSPFW4, DSPFW4);
	PSB_WVDC32(regs->saveDSPFW5, DSPFW5);
	PSB_WVDC32(regs->saveDSPFW6, DSPFW6);
	PSB_WVDC32(regs->saveCHICKENBIT, DSPCHICKENBIT);

	/make sure VGA plane is off. it initializes to on after reset!/
	PSB_WVDC32(0x80000000, VGACNTRL);

	drm_modeset_lock_all(dev);
	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
	if (drm_helper_crtc_in_use(crtc))
	dev_priv->ops->restore_crtc(crtc);

	list_for_each_entry(connector, &dev->mode_config.connector_list, base.head)
	if (connector->restore)
	connector->restore(&connector->base);

	drm_modeset_unlock_all(dev);
	return 0;
	}

	static int psb_power_down(struct drm_device *dev)
	{
	return 0;
	}

	static int psb_power_up(struct drm_device *dev)
	{
	return 0;
	}

	/* Poulsbo */
	static const struct psb_offset psb_regmap[2] = {
	{
	.fp0 = FPA0,
	.fp1 = FPA1,
	.cntr = DSPACNTR,
	.conf = PIPEACONF,
	.src = PIPEASRC,
	.dpll = DPLL_A,
	.htotal = HTOTAL_A,
	.hblank = HBLANK_A,
	.hsync = HSYNC_A,
	.vtotal = VTOTAL_A,
	.vblank = VBLANK_A,
	.vsync = VSYNC_A,
	.stride = DSPASTRIDE,
	.size = DSPASIZE,
	.pos = DSPAPOS,
	.base = DSPABASE,
	.surf = DSPASURF,
	.addr = DSPABASE,
	.status = PIPEASTAT,
	.linoff = DSPALINOFF,
	.tileoff = DSPATILEOFF,
	.palette = PALETTE_A,
	},
	{
	.fp0 = FPB0,
	.fp1 = FPB1,
	.cntr = DSPBCNTR,
	.conf = PIPEBCONF,
	.src = PIPEBSRC,
	.dpll = DPLL_B,
	.htotal = HTOTAL_B,
	.hblank = HBLANK_B,
	.hsync = HSYNC_B,
	.vtotal = VTOTAL_B,
	.vblank = VBLANK_B,
	.vsync = VSYNC_B,
	.stride = DSPBSTRIDE,
	.size = DSPBSIZE,
	.pos = DSPBPOS,
	.base = DSPBBASE,
	.surf = DSPBSURF,
	.addr = DSPBBASE,
	.status = PIPEBSTAT,
	.linoff = DSPBLINOFF,
	.tileoff = DSPBTILEOFF,
	.palette = PALETTE_B,
	}
	};

	static int psb_chip_setup(struct drm_device *dev)
	{
	struct drm_psb_private *dev_priv = dev->dev_private;
	dev_priv->regmap = psb_regmap;
	gma_get_core_freq(dev);
	gma_intel_setup_gmbus(dev);
	psb_intel_opregion_init(dev);
	psb_intel_init_bios(dev);
	return 0;
	}

	static void psb_chip_teardown(struct drm_device *dev)
	{
	struct drm_psb_private *dev_priv = dev->dev_private;
	psb_lid_timer_takedown(dev_priv);
	gma_intel_teardown_gmbus(dev);
	}

	const struct psb_ops psb_chip_ops = {
	.name = "Poulsbo",
	.accel_2d = 1,
	.pipes = 2,
	.crtcs = 2,
	.hdmi_mask = (1 << 0),
	.lvds_mask = (1 << 1),
	.sdvo_mask = (1 << 0),
	.cursor_needs_phys = 1,
	.sgx_offset = PSB_SGX_OFFSET,
	.chip_setup = psb_chip_setup,
	.chip_teardown = psb_chip_teardown,

	.crtc_helper = &psb_intel_helper_funcs,
	.crtc_funcs = &psb_intel_crtc_funcs,
	.clock_funcs = &psb_clock_funcs,

	.output_init = psb_output_init,

	#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
	.backlight_init = psb_backlight_init,
	#endif

	.init_pm = psb_init_pm,
	.save_regs = psb_save_display_registers,
	.restore_regs = psb_restore_display_registers,
	.save_crtc = gma_crtc_save,
	.restore_crtc = gma_crtc_restore,
	.power_down = psb_power_down,
	.power_up = psb_power_up,
	};