| /* |
| * OPA362 analog video amplifier with output/power control |
| * |
| * Copyright (C) 2014 Golden Delicious Computers |
| * Author: H. Nikolaus Schaller <hns@goldelico.com> |
| * |
| * based on encoder-tfp410 |
| * |
| * Copyright (C) 2013 Texas Instruments |
| * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| */ |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| #include "../dss/omapdss.h" |
| |
| struct panel_drv_data { |
| struct omap_dss_device dssdev; |
| struct omap_dss_device *in; |
| |
| struct gpio_desc *enable_gpio; |
| |
| struct videomode vm; |
| }; |
| |
| #define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev) |
| |
| static int opa362_connect(struct omap_dss_device *dssdev, |
| struct omap_dss_device *dst) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| dev_dbg(dssdev->dev, "connect\n"); |
| |
| if (omapdss_device_is_connected(dssdev)) |
| return -EBUSY; |
| |
| r = in->ops.atv->connect(in, dssdev); |
| if (r) |
| return r; |
| |
| dst->src = dssdev; |
| dssdev->dst = dst; |
| |
| return 0; |
| } |
| |
| static void opa362_disconnect(struct omap_dss_device *dssdev, |
| struct omap_dss_device *dst) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| dev_dbg(dssdev->dev, "disconnect\n"); |
| |
| WARN_ON(!omapdss_device_is_connected(dssdev)); |
| if (!omapdss_device_is_connected(dssdev)) |
| return; |
| |
| WARN_ON(dst != dssdev->dst); |
| if (dst != dssdev->dst) |
| return; |
| |
| dst->src = NULL; |
| dssdev->dst = NULL; |
| |
| in->ops.atv->disconnect(in, &ddata->dssdev); |
| } |
| |
| static int opa362_enable(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| dev_dbg(dssdev->dev, "enable\n"); |
| |
| if (!omapdss_device_is_connected(dssdev)) |
| return -ENODEV; |
| |
| if (omapdss_device_is_enabled(dssdev)) |
| return 0; |
| |
| in->ops.atv->set_timings(in, &ddata->vm); |
| |
| r = in->ops.atv->enable(in); |
| if (r) |
| return r; |
| |
| if (ddata->enable_gpio) |
| gpiod_set_value_cansleep(ddata->enable_gpio, 1); |
| |
| dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; |
| |
| return 0; |
| } |
| |
| static void opa362_disable(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| dev_dbg(dssdev->dev, "disable\n"); |
| |
| if (!omapdss_device_is_enabled(dssdev)) |
| return; |
| |
| if (ddata->enable_gpio) |
| gpiod_set_value_cansleep(ddata->enable_gpio, 0); |
| |
| in->ops.atv->disable(in); |
| |
| dssdev->state = OMAP_DSS_DISPLAY_DISABLED; |
| } |
| |
| static void opa362_set_timings(struct omap_dss_device *dssdev, |
| struct videomode *vm) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| dev_dbg(dssdev->dev, "set_timings\n"); |
| |
| ddata->vm = *vm; |
| dssdev->panel.vm = *vm; |
| |
| in->ops.atv->set_timings(in, vm); |
| } |
| |
| static void opa362_get_timings(struct omap_dss_device *dssdev, |
| struct videomode *vm) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| |
| dev_dbg(dssdev->dev, "get_timings\n"); |
| |
| *vm = ddata->vm; |
| } |
| |
| static int opa362_check_timings(struct omap_dss_device *dssdev, |
| struct videomode *vm) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| dev_dbg(dssdev->dev, "check_timings\n"); |
| |
| return in->ops.atv->check_timings(in, vm); |
| } |
| |
| static const struct omapdss_atv_ops opa362_atv_ops = { |
| .connect = opa362_connect, |
| .disconnect = opa362_disconnect, |
| |
| .enable = opa362_enable, |
| .disable = opa362_disable, |
| |
| .check_timings = opa362_check_timings, |
| .set_timings = opa362_set_timings, |
| .get_timings = opa362_get_timings, |
| }; |
| |
| static int opa362_probe(struct platform_device *pdev) |
| { |
| struct device_node *node = pdev->dev.of_node; |
| struct panel_drv_data *ddata; |
| struct omap_dss_device *dssdev, *in; |
| struct gpio_desc *gpio; |
| int r; |
| |
| dev_dbg(&pdev->dev, "probe\n"); |
| |
| if (node == NULL) { |
| dev_err(&pdev->dev, "Unable to find device tree\n"); |
| return -EINVAL; |
| } |
| |
| ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); |
| if (!ddata) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, ddata); |
| |
| gpio = devm_gpiod_get_optional(&pdev->dev, "enable", GPIOD_OUT_LOW); |
| if (IS_ERR(gpio)) |
| return PTR_ERR(gpio); |
| |
| ddata->enable_gpio = gpio; |
| |
| in = omapdss_of_find_source_for_first_ep(node); |
| if (IS_ERR(in)) { |
| dev_err(&pdev->dev, "failed to find video source\n"); |
| return PTR_ERR(in); |
| } |
| |
| ddata->in = in; |
| |
| dssdev = &ddata->dssdev; |
| dssdev->ops.atv = &opa362_atv_ops; |
| dssdev->dev = &pdev->dev; |
| dssdev->type = OMAP_DISPLAY_TYPE_VENC; |
| dssdev->output_type = OMAP_DISPLAY_TYPE_VENC; |
| dssdev->owner = THIS_MODULE; |
| |
| r = omapdss_register_output(dssdev); |
| if (r) { |
| dev_err(&pdev->dev, "Failed to register output\n"); |
| goto err_reg; |
| } |
| |
| return 0; |
| err_reg: |
| omap_dss_put_device(ddata->in); |
| return r; |
| } |
| |
| static int __exit opa362_remove(struct platform_device *pdev) |
| { |
| struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| struct omap_dss_device *dssdev = &ddata->dssdev; |
| struct omap_dss_device *in = ddata->in; |
| |
| omapdss_unregister_output(&ddata->dssdev); |
| |
| WARN_ON(omapdss_device_is_enabled(dssdev)); |
| if (omapdss_device_is_enabled(dssdev)) |
| opa362_disable(dssdev); |
| |
| WARN_ON(omapdss_device_is_connected(dssdev)); |
| if (omapdss_device_is_connected(dssdev)) |
| opa362_disconnect(dssdev, dssdev->dst); |
| |
| omap_dss_put_device(in); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id opa362_of_match[] = { |
| { .compatible = "omapdss,ti,opa362", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, opa362_of_match); |
| |
| static struct platform_driver opa362_driver = { |
| .probe = opa362_probe, |
| .remove = __exit_p(opa362_remove), |
| .driver = { |
| .name = "amplifier-opa362", |
| .of_match_table = opa362_of_match, |
| .suppress_bind_attrs = true, |
| }, |
| }; |
| |
| module_platform_driver(opa362_driver); |
| |
| MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>"); |
| MODULE_DESCRIPTION("OPA362 analog video amplifier with output/power control"); |
| MODULE_LICENSE("GPL v2"); |